connecting to NetworkSerialPort(target=Target(name='imx6ul-pico-hobbit-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4007, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4007 connected to 10.8.254.5 (port 4007) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2017.10.1-00009-gbc5d99d030 #1 Wed Nov 1 17:19:43 CET 2017 Board: Technexion Pico i.MX6UL Board detected i.MX6 UltraLite revision 1.0 mdio_bus: miibus0: probed imx-usb 2184200.usb: USB EHCI 1.00 imx-esdhc 2190000.usdhc: registered as 2190000.usdhc imx-esdhc 2194000.usdhc: registered as 2194000.usdhc netconsole: registered as netconsole-1 malloc space: 0x8fefca40 -> 0x9fdf947f (size 255 MiB) mmc0: detected MMC card version 5.1 mmc0: registered mmc0.boot0 mmc0: registered mmc0.boot1 mmc0: registered mmc0 running /env/bin/init... [?25h Hit m for menu or any other key to stop autoboot: 3 type exit to get to the menu [1;32mbarebox@[1;36mTechnexion Pico i.MX6UL Board:/[0m bootm -v -r /mnt/tftp/823151/tftp-deploy-bo0us8hl/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/823151/tftp-deploy-bo0us8hl/dtb/imx6ul-pico-hobbit.dtb /mnt/tftp/823151/tftp-deploy-bo0us8hl/kernel/zImage [1;32mbarebox@[1;36mTechnexion Pico i.MX6UL Board:/[0m bootm -v -r /mnt/tftp/823151/tftp-deploy-bo0us8hl/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/823151/tftp-deploy-bo0us8hl/dtb/imx6ul-pico-hobbit.dtb /mnt/tftp/823151/tftp-deploy-bo0us8hl/kernel/zImage warning: No MAC address set. Using random address da:32:7e:a2:17:0f eth1: 100Mbps full duplex link detected T DHCP client bound to address 10.8.254.253 Loading ARM Linux zImage '/mnt/tftp/823151/tftp-deploy-bo0us8hl/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x82e28000 no initrd load address, defaulting to 0x83864000 Loaded initrd GZIP compressed '/mnt/tftp/823151/tftp-deploy-bo0us8hl/ramdisk/ramdisk.cpio.gz' initrd is at 0x83864000-0x847b3cb9 Loading devicetree from '/mnt/tftp/823151/tftp-deploy-bo0us8hl/dtb/imx6ul-pico-hobbit.dtb' mmc0: Cannot find nodepath /soc/aips-bus@02100000/usdhc@02190000, cannot fixup Failed to fixup node in of_partition_fixup+0x1/0x1f8: Invalid argument commandline: console=ttymxc5,115200n8 Starting kernel at 0x82e28000, initrd at 0x83864000, oftree at 0x847b4000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.153-cip19-rt8 (KernelCI@build-j483909-arm-gcc-10-multi-v7-defconfig-xkp49) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Wed Nov 9 22:00:51 UTC 2022 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TechNexion PICO-IMX6UL and HOBBIT baseboard [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x9b800000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x000000009fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fffffff] [ 0.000000] percpu: Embedded 16 pages/cpu s33612 r8192 d23732 u65536 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: console=ttymxc5,115200n8 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 413080K/524288K available (13312K kernel code, 2324K rwdata, 5344K rodata, 2048K init, 417K bss, 45672K reserved, 65536K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=1. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] Switching to timer-based delay loop, resolution 41ns [ 0.000003] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000041] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.007421] Console: colour dummy device 80x30 [ 0.007529] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.007566] pid_max: default: 32768 minimum: 301 [ 0.007904] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.007942] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.009447] CPU: Testing write buffer coherency: ok [ 0.010077] CPU0: update cpu_capacity 1024 [ 0.010198] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.011880] Setting up static identity map for 0x80300000 - 0x803000ac [ 0.014434] rcu: Hierarchical SRCU implementation. [ 0.020358] EFI services will not be available. [ 0.020797] smp: Bringing up secondary CPUs ... [ 0.020814] smp: Brought up 1 node, 1 CPU [ 0.020838] SMP: Total of 1 processors activated (48.00 BogoMIPS). [ 0.020858] CPU: All CPU(s) started in SVC mode. [ 0.021899] devtmpfs: initialized [ 0.035449] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.035976] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.036032] futex hash table entries: 256 (order: 2, 16384 bytes, linear) [ 0.040826] pinctrl core: initialized pinctrl subsystem [ 0.044509] DMI not present or invalid. [ 0.046572] NET: Registered protocol family 16 [ 0.051343] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.056733] thermal_sys: Registered thermal governor 'step_wise' [ 0.056927] cpuidle: using governor menu [ 0.265839] vdd3p0: supplied by regulator-dummy [ 0.278028] cpu: supplied by regulator-dummy [ 0.290688] vddsoc: supplied by regulator-dummy [ 0.680763] No ATAGs? [ 0.681825] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.681858] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.690623] imx6ul-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver [ 0.701164] Serial: AMBA PL011 UART driver [ 0.774906] iommu: Default domain type: Translated [ 0.775821] vgaarb: loaded [ 0.778217] SCSI subsystem initialized [ 0.779538] usbcore: registered new interface driver usbfs [ 0.779654] usbcore: registered new interface driver hub [ 0.779760] usbcore: registered new device driver usb [ 0.783011] i2c i2c-0: IMX I2C adapter registered [ 0.785314] i2c i2c-1: IMX I2C adapter registered [ 0.786336] imx-i2c 21a8000.i2c: can't get pinctrl, bus recovery not supported [ 0.788289] i2c i2c-2: IMX I2C adapter registered [ 0.791353] pps_core: LinuxPPS API ver. 1 registered [ 0.791375] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.791423] PTP clock support registered [ 0.801118] clocksource: Switched to clocksource mxc_timer1 [ 3.017286] NET: Registered protocol family 2 [ 3.017855] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 3.019638] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 3.019736] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 3.019842] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 3.020000] TCP: Hash tables configured (established 4096 bind 4096) [ 3.020196] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 3.020264] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 3.020642] NET: Registered protocol family 1 [ 3.022477] RPC: Registered named UNIX socket transport module. [ 3.022507] RPC: Registered udp transport module. [ 3.022517] RPC: Registered tcp transport module. [ 3.022526] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 3.022547] PCI: CLS 0 bytes, default 64 [ 3.023477] Trying to unpack rootfs image as initramfs... [ 6.034811] Freeing initrd memory: 15680K [ 6.035941] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 6.039533] Initialise system trusted keyrings [ 6.040395] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 6.056822] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 6.059052] NFS: Registering the id_resolver key type [ 6.059292] Key type id_resolver registered [ 6.059306] Key type id_legacy registered [ 6.059573] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 6.059592] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 6.059672] ntfs: driver 2.1.32 [Flags: R/O]. [ 6.060832] Key type asymmetric registered [ 6.060855] Asymmetric key parser 'x509' registered [ 6.060968] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 6.060986] io scheduler mq-deadline registered [ 6.060999] io scheduler kyber registered [ 6.113290] pwm-backlight backlight: supply power not found, using dummy regulator [ 6.141465] mxs-dma 1804000.dma-apbh: initialized [ 6.170177] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 6.170227] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 6.295356] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled [ 6.305753] SuperH (H)SCI(F) driver initialized [ 6.308154] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 69, base_baud = 5000000) is a IMX [ 6.310412] 21fc000.serial: ttymxc5 at MMIO 0x21fc000 (irq = 70, base_baud = 5000000) is a IMX [ 6.310526] printk: console [ttymxc5] enabled [ 6.313969] msm_serial: driver initialized [ 6.314529] STMicroelectronics ASC driver initialized [ 6.318434] STM32 USART driver initialized [ 6.341002] panel-simple panel: supply power not found, using dummy regulator [ 6.341538] panel-simple panel: Specify missing connector_type [ 6.366986] brd: module loaded [ 6.384997] loop: module loaded [ 6.420700] CAN device driver interface [ 6.423690] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 6.428817] pps pps0: new PPS source ptp0 [ 6.504258] fec 20b4000.ethernet eth0: registered PHC device 0 [ 6.507670] e1000e: Intel(R) PRO/1000 Network Driver [ 6.507689] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 6.507837] igb: Intel(R) Gigabit Ethernet Network Driver [ 6.507851] igb: Copyright (c) 2007-2014 Intel Corporation. [ 6.521191] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 6.521351] usbcore: registered new interface driver pegasus [ 6.521471] usbcore: registered new interface driver asix [ 6.521565] usbcore: registered new interface driver ax88179_178a [ 6.521689] usbcore: registered new interface driver cdc_ether [ 6.521814] usbcore: registered new interface driver smsc75xx [ 6.521931] usbcore: registered new interface driver smsc95xx [ 6.522020] usbcore: registered new interface driver net1080 [ 6.522107] usbcore: registered new interface driver cdc_subset [ 6.522185] usbcore: registered new interface driver zaurus [ 6.522407] usbcore: registered new interface driver cdc_ncm [ 6.530161] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 6.530184] ehci-pci: EHCI PCI platform driver [ 6.530280] ehci-platform: EHCI generic platform driver [ 6.530949] ehci-orion: EHCI orion driver [ 6.531615] SPEAr-ehci: EHCI SPEAr driver [ 6.532065] ehci-st: EHCI STMicroelectronics driver [ 6.532508] ehci-exynos: EHCI Exynos driver [ 6.532927] ehci-atmel: EHCI Atmel driver [ 6.533325] tegra-ehci: Tegra EHCI driver [ 6.533784] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 6.533871] ohci-pci: OHCI PCI platform driver [ 6.534013] ohci-platform: OHCI generic platform driver [ 6.534644] SPEAr-ohci: OHCI SPEAr driver [ 6.535072] ohci-st: OHCI STMicroelectronics driver [ 6.535481] ohci-atmel: OHCI Atmel driver [ 6.537882] usbcore: registered new interface driver usb-storage [ 6.556576] i2c /dev entries driver [ 6.604263] sdhci: Secure Digital Host Controller Interface driver [ 6.604285] sdhci: Copyright(c) Pierre Ossman [ 6.610404] Synopsys Designware Multimedia Card Interface Driver [ 6.615193] sdhci-pltfm: SDHCI platform and OF driver helper [ 6.634730] ledtrig-cpu: registered to indicate activity on CPUs [ 6.637292] usbcore: registered new interface driver usbhid [ 6.637316] usbhid: USB HID core driver [ 6.653642] NET: Registered protocol family 10 [ 6.656224] Segment Routing with IPv6 [ 6.656419] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 6.657885] NET: Registered protocol family 17 [ 6.657934] can: controller area network core [ 6.658091] NET: Registered protocol family 29 [ 6.658110] can: raw protocol [ 6.658126] can: broadcast manager protocol [ 6.658148] can: netlink gateway - max_hops=1 [ 6.659170] Key type dns_resolver registered [ 6.663374] ThumbEE CPU extension supported. [ 6.663431] Registering SWP/SWPB emulation handler [ 6.664778] printk: console [ttymxc5]: printing thread started [ 6.664847] Loading compiled-in X.509 certificates [ 6.700281] pwm-backlight backlight: supply power not found, using dummy regulator [ 6.705161] panel-simple panel: supply power not found, using dummy regulator [ 6.705563] panel-simple panel: Specify missing connector_type [ 7.781152] mmc0: SDHCI controller on 2190000.mmc [2190000.mmc] using ADMA [ 7.781795] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 7.781876] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 7.810763] mmc1: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA [ 7.811670] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 7.814786] hub 1-0:1.0: USB hub found [ 7.814955] hub 1-0:1.0: 1 port detected [ 7.820573] imx_thermal 20c8000.anatop:tempmon: Industrial CPU temperature grade - max:105C critical:100C passive:95C [ 7.823416] pwm-backlight backlight: supply power not found, using dummy regulator [ 7.828115] panel-simple panel: supply power not found, using dummy regulator [ 7.828522] panel-simple panel: Specify missing connector_type [ 7.883389] pwm-backlight backlight: supply power not found, using dummy regulator [ 7.888426] panel-simple panel: supply power not found, using dummy regulator [ 7.888827] panel-simple panel: Specify missing connector_type [ 7.899542] Freeing unused kernel memory: 2048K [ 7.927700] Run /init as init process [ 7.942536] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 7.944640] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 7.970236] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 7.974397] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 7.991650] mmc0: new DDR MMC card at address 0001 [ 7.994995] mmcblk0: mmc0:0001 M62704 3.56 GiB [ 7.995552] mmcblk0boot0: mmc0:0001 M62704 partition 1 2.00 MiB [ 7.996084] mmcblk0boot1: mmc0:0001 M62704 partition 2 2.00 MiB [ 7.996569] mmcblk0rpmb: mmc0:0001 M62704 partition 3 512 KiB, chardev (235:0) [ 8.000374] mmcblk0: p1 p2 [ 8.047412] pwm-backlight backlight: supply power not found, using dummy regulator [ 8.052917] panel-simple panel: supply power not found, using dummy regulator [ 8.053314] panel-simple panel: Specify missing connector_type Starting syslogd: [ 8.185872] mmc1: new high speed SDIO card at address 0001 OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: [ 8.368158] udevd[92]: starting version 3.2.9 [ 8.370177] random: udevd: uninitialized urandom read (16 bytes read) [ 8.370795] random: udevd: uninitialized urandom read (16 bytes read) [ 8.389563] random: udevd: uninitialized urandom read (16 bytes read) [ 8.414668] udevd[92]: specified user 'tss' unknown [ 8.415034] udevd[92]: specified group 'tss' unknown [ 8.441472] udevd[93]: starting eudev-3.2.9 [ 11.880827] pwm-backlight backlight: supply power not found, using dummy regulator [ 11.894248] panel-simple panel: supply power not found, using dummy regulator [ 11.894694] panel-simple panel: Specify missing connector_type [ 12.785294] pwm-backlight backlight: supply power not found, using dummy regulator [ 12.790074] panel-simple panel: supply power not found, using dummy regulator [ 12.790491] panel-simple panel: Specify missing connector_type [ 13.614428] caam 2140000.crypto: Entropy delay = 3200 [ 13.675251] caam 2140000.crypto: Instantiated RNG4 SH0 [ 13.736011] caam 2140000.crypto: Instantiated RNG4 SH1 [ 13.736041] caam 2140000.crypto: device ID = 0x0a16030000000000 (Era 8) [ 13.736062] caam 2140000.crypto: job rings = 3, qi = 0 [ 13.782672] pwm-backlight backlight: supply power not found, using dummy regulator [ 13.787485] panel-simple panel: supply power not found, using dummy regulator [ 13.787893] panel-simple panel: Specify missing connector_type [ 14.473164] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 14.989228] sgtl5000 1-000a: sgtl5000 revision 0x11 [ 15.014213] sgtl5000 1-000a: Using internal LDO instead of VDDD: check ER1 erratum [ 15.066690] pwm-backlight backlight: supply power not found, using dummy regulator [ 15.071698] panel-simple panel: supply power not found, using dummy regulator [ 15.072104] panel-simple panel: Specify missing connector_type [ 15.773458] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 15.773745] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 15.773781] cfg80211: failed to load regulatory.db [ 15.862786] pwm-backlight backlight: supply power not found, using dummy regulator [ 15.867551] panel-simple panel: supply power not found, using dummy regulator [ 15.867959] panel-simple panel: Specify missing connector_type [ 15.911587] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430a0-sdio for chip BCM43430/0 [ 15.913955] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430a0-sdio.bin failed with error -2 [ 15.915608] pwm-backlight backlight: supply power not found, using dummy regulator [ 15.920384] panel-simple panel: supply power not found, using dummy regulator [ 15.920801] panel-simple panel: Specify missing connector_type [ 16.931449] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50 [ 17.435511] caam algorithms registered in /proc/crypto [ 17.439059] caam 2140000.crypto: caam pkc algorithms registered in /proc/crypto [ 17.439098] caam 2140000.crypto: registering rng-caam [ 17.442272] pwm-backlight backlight: supply power not found, using dummy regulator [ 17.475960] panel-simple panel: supply power not found, using dummy regulator [ 17.476369] panel-simple panel: Specify missing connector_type [ 17.492750] pwm-backlight backlight: supply power not found, using dummy regulator [ 17.500590] panel-simple panel: supply power not found, using dummy regulator [ 17.500997] panel-simple panel: Specify missing connector_type [ 17.565236] pwm-backlight backlight: supply power not found, using dummy regulator [ 17.569998] panel-simple panel: supply power not found, using dummy regulator [ 17.570401] panel-simple panel: Specify missing connector_type done [ 17.625163] random: crng init done Saving random seed: OK Starting network: OK Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-823151/environment . /lava-823151/environment / # /lava-823151/bin/lava-test-runner /lava-823151/0 /lava-823151/bin/lava-test-runner /lava-823151/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-823151/0/tests/0_dmesg + cat uuid + UUID=823151_1.5.2.3.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 18.492933] [ 18.571848] [ 18.645008] + set +x [ 18.718278] [ 18.721002] # / # #export SHELL=/bin/sh / # export SHELL=/bin/sh. /lava-823151/environment / # . /lava-823151/environment/lava-823151/bin/lava-test-runner /lava-823151/1 / # /lava-823151/bin/lava-test-runner /lava-823151/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-823151/1/tests/1_bootrr + cat uuid + UUID=823151_1.5.2.3.5 + set +x + export 'PATH=/opt/bootrr/helpers:/lava-823151/1/[ 19.276370] ../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr + sh helpers/bootrr-auto /lava-823151/1/../bin/lava-test-case [ 20.370659] /lava-823151/1/../bin/lava-test-case [ 20.438187] /lava-823151/1/../bin/lava-test-case [ 20.477724] + set +x / # [ 20.507156]