connecting to NetworkSerialPort(target=Target(name='imx53-qsrb-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4010, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4010 connected to 10.8.254.5 (port 4010) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2019.05.0 #2 Mon May 27 12:33:32 CEST 2019 Board: Freescale i.MX53 Quick Start-R Board detected i.MX53 revision 2.1 i.MX reset reason POR (SRSR: 0x00000001) mc13xxx-i2c mc347080: Found MC34708 ID: 0x014 mdio_bus: miibus0: probed eth0: got preset MAC address: 00:04:9f:02:71:b3 imx-usb 53f80200.usb@53f80200.of: USB EHCI 1.00 imx-esdhc 50004000.esdhc@50004000.of: registered as mmc0 imx-esdhc 50020000.esdhc@50020000.of: registered as mmc2 imx-ipuv3 18000000.ipu@18000000.of: IPUv3M probed netconsole: registered as netconsole-1 malloc space: 0xbfe7d3c0 -> 0xcfcfa77f (size 254.5 MiB) mmc0: detected SD card version 2.0 mmc0: registered mmc0 MCIMX53-START-R board 1.0 rev B envfs: no envfs (magic mismatch) - envfs never written? running /env/bin/init... [?25h Hit m for menu or any key to stop autoboot: type exit to get to the menu [1;32mbarebox@[1;36mFree scale i.MX53 Quick Start-R Board:/[0m global linux.bootargs.console=\"console=ttymxc0,115200n8\" [1;32mbarebox@[1;36mFreescale i.MX53 Quick Start-R Board:/[0m global linux.bootargs.console=\"console=ttymxc0,115200n8\"global linux.bootargs.nfs=\"'root=/dev/nfs rw nfsroot=10.8.254.2:/var/lib/lava/dispatcher/tmp/823142/extract-nfsrootfs-pmks807e,v3,tcp ip=dhcp'\" [1;32mbarebox@[1;36mFreescale i.MX53 Quick Start-R Board:/[0m global linux.bootargs.nfs=\"'root=/dev/nfs rw nfsroot=10.8.254.2:/var/lib/lava/dispatcher/tmp/823142/extract-nfsrootfs-pmks807e,v3,tcp ip=dhcp'\"bootm -v -o /mnt/tftp/823142/tftp-deploy-184lw0s1/dtb/imx53-qsrb.dtb /mnt/tftp/823142/tftp-deploy-184lw0s1/kernel/zImage [1;32mbarebox@[1;36mFreescale i.MX53 Quick Start-R Board:/[0m bootm -v -o /mnt/tftp/823142/tftp-deploy-184lw0s1/dtb/imx53-qsrb.dtb /mnt/tftp/823142/tftp-deploy-184lw0s1/kernel/zImage eth0: 100Mbps full duplex link detected T eth0: DHCP client bound to address 10.8.254.164 Loading ARM Linux zImage '/mnt/tftp/823142/tftp-deploy-184lw0s1/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x72e28000 no initrd load address, defaulting to 0x78000000 Loading devicetree from '/mnt/tftp/823142/tftp-deploy-184lw0s1/dtb/imx53-qsrb.dtb' commandline: console=ttymxc0,115200n8 root=/dev/nfs rw nfsroot=10.8.254.2:/var/lib/lava/dispatcher/tmp/823142/extract-nfsrootfs-pmks807e,v3,tcp ip=dhcp Starting kernel at 0x72e28000, oftree at 0x78000000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.153-cip19-rt8 (KernelCI@build-j483909-arm-gcc-10-multi-v7-defconfig-xkp49) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Wed Nov 9 22:00:51 UTC 2022 [ 0.000000] CPU: ARMv7 Processor [412fc085] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Freescale i.MX53 Quick Start-R Board [ 0.000000] Memory policy: Data cache writeback [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0xcb800000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000070000000-0x000000008fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000090000000-0x00000000cfffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000070000000-0x000000008fffffff] [ 0.000000] node 0: [mem 0x00000000b0000000-0x00000000cfffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000070000000-0x00000000cfffffff] [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] percpu: Embedded 16 pages/cpu s33612 r8192 d23732 u65536 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 261120 [ 0.000000] Kernel command line: console=ttymxc0,115200n8 root=/dev/nfs rw nfsroot=10.8.254.2:/var/lib/lava/dispatcher/tmp/823142/extract-nfsrootfs-pmks807e,v3,tcp ip=dhcp [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 949004K/1048576K available (13312K kernel code, 2324K rwdata, 5344K rodata, 2048K init, 417K bss, 34036K reserved, 65536K cma-reserved, 457740K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=1. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] TrustZone Interrupt Controller (TZIC) initialized [ 0.000000] CPU identified as i.MX53, silicon rev 2.1 [ 0.000000] Switching to timer-based delay loop, resolution 25ns [ 0.000002] sched_clock: 32 bits at 40MHz, resolution 25ns, wraps every 53687091187ns [ 0.000018] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 47781511156 ns [ 0.002321] Console: colour dummy device 80x30 [ 0.002393] Calibrating delay loop (skipped), value calculated using timer frequency.. 80.00 BogoMIPS (lpj=400000) [ 0.002414] pid_max: default: 32768 minimum: 301 [ 0.002603] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.002620] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.003416] CPU: Testing write buffer coherency: ok [ 0.003473] CPU0: Spectre v2: using BPIALL workaround [ 0.003817] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.004664] Setting up static identity map for 0x70300000 - 0x703000ac [ 0.005771] rcu: Hierarchical SRCU implementation. [ 0.007930] EFI services will not be available. [ 0.008126] smp: Bringing up secondary CPUs ... [ 0.008132] smp: Brought up 1 node, 1 CPU [ 0.008142] SMP: Total of 1 processors activated (80.00 BogoMIPS). [ 0.008152] CPU: All CPU(s) started in SVC mode. [ 0.008730] devtmpfs: initialized [ 0.016492] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2 [ 0.016793] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.016826] futex hash table entries: 256 (order: 2, 16384 bytes, linear) [ 0.020765] pinctrl core: initialized pinctrl subsystem [ 0.022809] DMI not present or invalid. [ 0.023668] NET: Registered protocol family 16 [ 0.026523] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.031268] thermal_sys: Registered thermal governor 'step_wise' [ 0.031375] cpuidle: using governor menu [ 0.031880] No ATAGs? [ 0.031889] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.034328] Serial: AMBA PL011 UART driver [ 0.066913] imx53-pinctrl 53fa8000.iomuxc: initialized IMX pinctrl driver [ 0.103925] iommu: Default domain type: Translated [ 0.104600] vgaarb: loaded [ 0.105574] SCSI subsystem initialized [ 0.106293] usbcore: registered new interface driver usbfs [ 0.106353] usbcore: registered new interface driver hub [ 0.106405] usbcore: registered new device driver usb [ 0.108245] i2c i2c-1: IMX I2C adapter registered [ 0.110007] i2c i2c-0: IMX I2C adapter registered [ 0.111353] pps_core: LinuxPPS API ver. 1 registered [ 0.111363] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.111388] PTP clock support registered [ 0.115599] clocksource: Switched to clocksource mxc_timer1 [ 1.081363] NET: Registered protocol family 2 [ 1.081692] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.082495] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 1.082544] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 1.082588] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 1.082650] TCP: Hash tables configured (established 4096 bind 4096) [ 1.082821] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.082849] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.083016] NET: Registered protocol family 1 [ 1.083914] RPC: Registered named UNIX socket transport module. [ 1.083925] RPC: Registered udp transport module. [ 1.083930] RPC: Registered tcp transport module. [ 1.083934] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.083945] PCI: CLS 0 bytes, default 64 [ 1.085017] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 1.086569] Initialise system trusted keyrings [ 1.086981] workingset: timestamp_bits=30 max_order=18 bucket_order=0 [ 1.093765] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.094811] NFS: Registering the id_resolver key type [ 1.094872] Key type id_resolver registered [ 1.094878] Key type id_legacy registered [ 1.094990] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.095002] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.095046] ntfs: driver 2.1.32 [Flags: R/O]. [ 1.095781] Key type asymmetric registered [ 1.095795] Asymmetric key parser 'x509' registered [ 1.095861] bounce: pool size: 64 pages [ 1.095929] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.095941] io scheduler mq-deadline registered [ 1.095947] io scheduler kyber registered [ 1.131942] imx-sdma 63fb0000.sdma: Direct firmware load for imx/sdma/sdma-imx53.bin failed with error -2 [ 1.131974] imx-sdma 63fb0000.sdma: external firmware not found, using ROM firmware [ 1.184884] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled [ 1.189655] SuperH (H)SCI(F) driver initialized [ 1.190571] 53fbc000.serial: ttymxc0 at MMIO 0x53fbc000 (irq = 47, base_baud = 4166666) is a IMX [ 1.190666] printk: console [ttymxc0] enabled [ 1.192295] msm_serial: driver initialized [ 1.192511] STMicroelectronics ASC driver initialized [ 1.193923] STM32 USART driver initialized [ 1.213528] brd: module loaded [ 1.222835] loop: module loaded [ 1.226538] ahci-imx 10000000.sata: supply ahci not found, using dummy regulator [ 1.226804] ahci-imx 10000000.sata: supply phy not found, using dummy regulator [ 1.226880] ahci-imx 10000000.sata: supply target not found, using dummy regulator [ 1.227239] ahci-imx 10000000.sata: hwmon0: sensor 'sata_ahci' [ 1.229428] ahci-imx 10000000.sata: SSS flag set, parallel bus scan disabled [ 1.229463] ahci-imx 10000000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.229479] ahci-imx 10000000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc [ 1.230899] scsi host0: ahci-imx [ 1.231340] ata1: SATA max UDMA/133 mmio [mem 0x10000000-0x10000fff] port 0x100 irq 44 [ 1.242489] CAN device driver interface [ 1.243422] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 1.253003] e1000e: Intel(R) PRO/1000 Network Driver [ 1.253018] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.253112] igb: Intel(R) Gigabit Ethernet Network Driver [ 1.253119] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.257696] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.257780] usbcore: registered new interface driver pegasus [ 1.257833] usbcore: registered new interface driver asix [ 1.257871] usbcore: registered new interface driver ax88179_178a [ 1.257906] usbcore: registered new interface driver cdc_ether [ 1.257952] usbcore: registered new interface driver smsc75xx [ 1.257999] usbcore: registered new interface driver smsc95xx [ 1.258044] usbcore: registered new interface driver net1080 [ 1.258083] usbcore: registered new interface driver cdc_subset [ 1.258117] usbcore: registered new interface driver zaurus [ 1.258220] usbcore: registered new interface driver cdc_ncm [ 1.260966] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.260979] ehci-pci: EHCI PCI platform driver [ 1.261022] ehci-platform: EHCI generic platform driver [ 1.261249] ehci-orion: EHCI orion driver [ 1.261419] SPEAr-ehci: EHCI SPEAr driver [ 1.261564] ehci-st: EHCI STMicroelectronics driver [ 1.261703] ehci-exynos: EHCI Exynos driver [ 1.261834] ehci-atmel: EHCI Atmel driver [ 1.261982] tegra-ehci: Tegra EHCI driver [ 1.262145] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.262186] ohci-pci: OHCI PCI platform driver [ 1.262253] ohci-platform: OHCI generic platform driver [ 1.262467] SPEAr-ohci: OHCI SPEAr driver [ 1.262641] ohci-st: OHCI STMicroelectronics driver [ 1.262797] ohci-atmel: OHCI Atmel driver [ 1.263651] usbcore: registered new interface driver usb-storage [ 1.270385] i2c /dev entries driver [ 1.288247] sdhci: Secure Digital Host Controller Interface driver [ 1.288262] sdhci: Copyright(c) Pierre Ossman [ 1.290343] Synopsys Designware Multimedia Card Interface Driver [ 1.291860] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.298697] sdhci-esdhc-imx 50020000.mmc: Got CD GPIO [ 1.298736] sdhci-esdhc-imx 50020000.mmc: Got WP GPIO [ 1.300220] ledtrig-cpu: registered to indicate activity on CPUs [ 1.301610] usbcore: registered new interface driver usbhid [ 1.301622] usbhid: USB HID core driver [ 1.307545] NET: Registered protocol family 10 [ 1.308916] Segment Routing with IPv6 [ 1.308994] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.309758] NET: Registered protocol family 17 [ 1.309787] can: controller area network core [ 1.309889] NET: Registered protocol family 29 [ 1.309897] can: raw protocol [ 1.309907] can: broadcast manager protocol [ 1.309918] can: netlink gateway - max_hops=1 [ 1.310626] Key type dns_resolver registered [ 1.311179] ThumbEE CPU extension supported. [ 1.311204] Registering SWP/SWPB emulation handler [ 1.311874] printk: console [ttymxc0]: printing thread started [ 1.311920] Loading compiled-in X.509 certificates [ 1.339200] imx_usb 53f80000.usb: No over current polarity defined [ 1.342575] imx_usb 53f80200.usb: No over current polarity defined [ 1.343647] mmc0: SDHCI controller on 50004000.mmc [50004000.mmc] using ADMA [ 2.418205] mmc2: SDHCI controller on 50020000.mmc [50020000.mmc] using ADMA [ 2.421338] imx_usb 53f80000.usb: No over current polarity defined [ 2.424784] imx_usb 53f80200.usb: No over current polarity defined [ 2.429298] imx_usb 53f80000.usb: No over current polarity defined [ 2.432738] imx_usb 53f80200.usb: No over current polarity defined [ 2.435165] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 2.439237] imx_usb 53f80000.usb: No over current polarity defined [ 2.442599] imx_usb 53f80200.usb: No over current polarity defined [ 2.525218] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.534131] ata1: SATA link down (SStatus 0 SControl 300) [ 2.534366] ahci-imx 10000000.sata: no device found, disabling link. [ 2.534405] ahci-imx 10000000.sata: pass ahci_imx..hotplug=1 to enable hotplug [ 2.549835] mmc0: new high speed SDHC card at address 0001 [ 2.578165] mmcblk0: mmc0:0001 SD16G 14.6 GiB [ 2.583938] imx_usb 53f80000.usb: No over current polarity defined [ 2.587551] imx_usb 53f80200.usb: No over current polarity defined [ 2.625839] SMSC LAN8710/LAN8720 63fec000.ethernet-1:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=63fec000.ethernet-1:00, irq=POLL) [ 4.726765] fec 63fec000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 4.755891] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 4.785874] Sending DHCP requests ., OK [ 4.826345] IP-Config: Got DHCP answer from 10.8.254.2, my address is 10.8.254.164 [ 4.826426] IP-Config: Complete: [ 4.826443] device=eth0, hwaddr=00:04:9f:02:71:b3, ipaddr=10.8.254.164, mask=255.255.255.0, gw=255.255.255.255 [ 4.826506] host=10.8.254.164, domain=, nis-domain=(none) [ 4.826533] bootserver=10.8.254.2, rootserver=10.8.254.2, rootpath= [ 4.826570] nameserver0=10.8.254.2 [ 4.918740] VFS: Mounted root (nfs filesystem) on device 0:15. [ 4.919351] devtmpfs: mounted [ 4.923224] Freeing unused kernel memory: 2048K [ 4.946505] Run /sbin/init as init process [ 5.761484] systemd[1]: System time before build time, advancing clock. [ 5.870358] systemd[1]: systemd 247.3-7+deb11u1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 5.871241] systemd[1]: Detected architecture arm. Welcome to [1mDebian GNU/Linux 11 (bullseye)[0m! [ 5.949740] systemd[1]: Set hostname to . [[0;32m OK [0m] Created slice [0;1;39msystem-getty.slice[0[ 7.696638] systemd[1]: Queued start job for default target Graphical Interface. m. [ 7.698948] random: systemd: uninitialized urandom read (16 bytes read) [ 7.699301] systemd[1]: system-getty.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 7.699335] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 7.700666] systemd[1]: Created slice system-getty.slice. [[0;32m OK [0m] Created slice [0;1;39msystem-modprobe.slice[ 7.749221] random: systemd: uninitialized urandom read (16 bytes read) [0m. [ 7.750390] systemd[1]: Created slice system-modprobe.slice. [[0;32m OK [0m] Created slice [0;1;39msystem-serial\x2dgett[ 7.769903] random: systemd: uninitialized urandom read (16 bytes read) y.slice[0m. [ 7.771020] systemd[1]: Created slice system-serial\x2dgetty.slice. [[0;32m OK [0m] Created slice[ 7.792768] systemd[1]: Created slice User and Session Slice. [0;1;39mUser and Session Slice[0m. [[0;32m OK [0m] Started [0;1;39mDispatch Password …ts to Console Directory Watch[0m. [ 7.826665] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [[0;32m OK [0m] Started [0;1;39mForward Password R…uests [ 7.858782] systemd[1]: Started Forward Password Requests to Wall Directory Watch. to Wall Directory Watch[0m. [[0;32m OK [0m] Reached target [0;1;39mLocal Encrypted Volumes[0m. [ 7.896287] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. [ 7.896848] systemd[1]: Reached target Local Encrypted Volumes. [[0;32m OK [0m] Reached target [0;1;39mPaths[0m. [ 7.927099] systemd[1]: Reached target Paths. [[0;32m OK [0m] Reached target [0;1;39mRemote File Systems[0m. [ 7.956526] systemd[1]: Reached target Remote File Systems. [[0;32m OK [0m] Reached target [0;1;39mSlices[0m. [ 7.986384] systemd[1]: Reached target Slices. [[0;32m OK [0m] Reached target [0;1;39mSwap[0m. [ 8.016628] systemd[1]: Reached target Swap. [[0;32m OK [0m] Listening on [0;1;39minitctl Compatibility Named Pipe[0m. [ 8.048114] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.124295] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. [[0;32m OK [0m] Listening on [ 8.135506] systemd[1]: Listening on Journal Socket (/dev/log). [0;1;39mJournal Socket (/dev/log)[0m. [[0;32m OK [0m] Listening on [0;1;39mJournal Socket[0m. [ 8.177311] systemd[1]: Listening on Journal Socket. [[0;32m OK [0m] Listening on [0;1;39mNetwork Service Netlin[ 8.210895] systemd[1]: Listening on Network Service Netlink Socket. k Socket[0m. [[0;32m OK [0m] Listening on [0;1;39mudev Control Socket[0[ 8.250293] systemd[1]: Listening on udev Control Socket. m. [[0;32m OK [0m] Listening on [0;1;39mudev Kernel Socket[0m. [ 8.288173] systemd[1]: Listening on udev Kernel Socket. [ 8.317938] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 8.319480] systemd[1]: Condition check resulted in POSIX Message Queue File System being skipped. Mounting [0;1;39mKernel Debug File System[0m... [ 8.345268] systemd[1]: Mounting Kernel Debug File System... Mounting [0;1;39mKernel Trace File System[0m... [ 8.380387] systemd[1]: Mounting Kernel Trace File System... Starting [0;1;39mCreate list of st…odes for the current kernel[0m... [ 8.417784] systemd[1]: Starting Create list of static device nodes for the current kernel... Starting [0;1;39mLoad Kernel Module configfs[0m... [ 8.479304] systemd[1]: Starting Load Kernel Module configfs... Starting [0;1;39mLoad Kernel Module drm[0m... [ 8.539990] systemd[1]: Starting Load Kernel Module drm... Starting [0;1;39mLoad Kernel Module fuse[0m... [ 8.586990] systemd[1]: Starting Load Kernel Module fuse... [ 8.620783] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. Starting [0;1;39mJournal Service[0m... [ 8.649373] systemd[1]: Starting Journal Service... Starting [0;1;39mLoad Kernel Modules[0m... [ 8.706985] systemd[1]: Starting Load Kernel Modules... Starting [0;1;39mRemount Root and Kernel File Systems[ 8.736479] random: systemd: uninitialized urandom read (16 bytes read) [0m... [ 8.740726] systemd[1]: Starting Remount Root and Kernel File Systems... Starting [0;1;39mColdplug All udev Devices[0m... [ 8.776654] random: systemd: uninitialized urandom read (16 bytes read) [ 8.794797] systemd[1]: Starting Coldplug All udev Devices... [[0;32m OK [0m] Mounted [0;1;39mKernel Debug File System[0m. [[0;32m OK [0m] Mounted [0;1;39mKernel Trace File System[0m. [[0;32m OK [0m] Finished [0;1;39mCreate list of st… nodes for the current kernel[0m. [ 8.843583] systemd[1]: Mounted Kernel Debug File System. [ 8.877773] systemd[1]: Mounted Kernel Trace File System. [ 8.907616] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 9.117282] systemd[1]: modprobe@configfs.service: Succeeded. [[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module configfs[0m. [ 9.132159] systemd[1]: Finished Load Kernel Module configfs. [ 9.168774] systemd[1]: modprobe@drm.service: Succeeded. [[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module drm[0m. [ 9.186099] systemd[1]: Finished Load Kernel Module drm. [[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module fuse[0m. [ 9.218265] systemd[1]: modprobe@fuse.service: Succeeded. [ 9.219668] systemd[1]: Finished Load Kernel Module fuse. [ 9.230951] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 9.231604] random: systemd: uninitialized urandom read (16 bytes read) Mounting [0;1;39mKernel Configuration File System[0m... [[0;32m OK [0m] Finished [0;1;39mLoad Kernel Modules[0m. [[0;32m OK [0m] Finished [0;[ 9.301096] systemd[1]: Mounting Kernel Configuration File System... 1;39mRemount Root and Kernel File[ 9.338909] systemd[1]: Finished Load Kernel Modules. Systems[0m. [ 9.368295] systemd[1]: Finished Remount Root and Kernel File Systems. [ 9.437480] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 9.438092] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. Starting [0;1;39mLoad/Save Random Seed[0m... Starting [0;1;39mApply Kernel Variables[0m... [ 9.472534] systemd[1]: Starting Load/Save Random Seed... [ 9.506978] systemd[1]: Starting Apply Kernel Variables... Starting [0;1;39mCreate System Users[0m... [ 9.557841] systemd[1]: Starting Create System Users... [[0;32m OK [0m] Mounted [0;1;39mKernel Configuration File System[0m. [ 9.610936] systemd[1]: Mounted Kernel Configuration File System. [[0;32m OK [0m] Finished [0;1;39mApply Kernel Variables[0m. [ 9.917688] systemd[1]: Finished Apply Kernel Variables. [ 10.135182] systemd[1]: Finished Create System Users. [[0;32m OK [0m] Finished [0;1;39mCreate System Users[0m. [[0;32m OK [0m] Started [0;1;39mJournal Service[0m. [ 10.167137] systemd[1]: Started Journal Service. [ 10.183014] random: systemd-journal: uninitialized urandom read (16 bytes read) Starting [0;1;39mFlush Journal to Persistent Storage[0m... [ 10.197161] random: systemd: uninitialized urandom read (16 bytes read) [ 10.218535] random: systemd-journal: uninitialized urandom read (16 bytes read) Starting [0;1;39mCreate Static Device Nodes in /dev[0m... [ 10.567449] systemd-journald[86]: Received client request to flush runtime journal. [[0;32m OK [0m] Finished [0;1;39mCreate Static Device Nodes in /dev[0m. [[0;32m OK [0m] Reached target [0;1;39mLocal File Systems (Pre)[0m. [[0;32m OK [0m] Reached target [0;1;39mLocal File Systems[0m. Starting [0;1;39mRule-based Manage…for Device Events and Files[0m... [ 11.136040] random: crng init done [ 11.136060] random: 44 urandom warning(s) missed due to ratelimiting [[0;32m OK [0m] Finished [0;1;39mLoad/Save Random Seed[0m. [[0;32m OK [0m] Finished [0;1;39mFlush Journal to Persistent Storage[0m. Starting [0;1;39mCreate Volatile Files and Directories[0m... [[0;32m OK [0m] Started [0;1;39mRule-based Manager for Device Events and Files[0m. Starting [0;1;39mNetwork Service[0m... [[0;32m OK [0m] Finished [0;1;39mCreate Volatile Files and Directories[0m. Starting [0;1;39mNetwork Time Synchronization[0m... Starting [0;1;39mUpdate UTMP about System Boot/Shutdown[0m... [[0;32m OK [0m] Started [0;1;39mNetwork Service[0m. Starting [0;1;39mNetwork Name Resolution[0m... [[0;32m OK [0m] Finished [0;1;39mUpdate UTMP about System Boot/Shutdown[0m. [[0;32m OK [0m] Finished [0;1;39mColdplug All udev Devices[0m. [[0;32m OK [0m] Started [0;1;39mNetwork Time Synchronization[0m. [[0;32m OK [0m] Reached target [0;1;39mSystem Initialization[0m. [[0;32m OK [0m] Started [0;1;39mDaily Cleanup of Temporary Directories[0m. [[0;32m OK [0m] Reached target [0;1;39mSystem Time Set[0m. [[0;32m OK [0m] Reached target [0;1;39mSystem Time Synchronized[0m. [[0;32m OK [0m] Started [0;1;39mDaily apt download activities[0m. [[0;32m OK [0m] Started [0;1;39mDaily apt upgrade and clean activities[0m. [[0;32m OK [0m] Started [0;1;39mPeriodic ext4 Onli…ata Check for All Filesystems[0m. [[0;32m OK [0m] Started [0;1;39mDiscard unused blocks once a week[0m. [[0;32m OK [0m] Reached target [0;1;39mTimers[0m. [[0;32m OK [0m] Listening on [0;1;39mD-Bus System Message Bus Socket[0m. [[0;32m OK [0m] Reached target [0;1;39mSockets[0m. [[0;32m OK [0m] Reached target [0;1;39mBasic System[0m. [[0;32m OK [0m] Started [0;1;39mD-Bus System Message Bus[0m. Starting [0;1;39mRemove Stale Onli…t4 Metadata Check Snapshots[0m... Starting [0;1;39mUser Login Management[0m... [[0;32m OK [0m] Started [0;1;39mNetwork Name Resolution[0m. [[0;32m OK [0m] Reached target [0;1;39mNetwork[0m. [[0;32m OK [0m] Reached target [0;1;39mHost and Network Name Lookups[0m. Starting [0;1;39mPermit User Sessions[0m... [[0;32m OK [0m] Finished [0;1;39mPermit User Sessions[0m. [[0;32m OK [0m] Started [0;1;39mGetty on tty1[0m. [ 18.873075] imx-ipuv3 18000000.ipu: IPUv3M probed [ 18.876450] imx_usb 53f80000.usb: No over current polarity defined [ 18.879819] imx_usb 53f80200.usb: No over current polarity defined [ 19.088774] imx_usb 53f80000.usb: No over current polarity defined [ 19.092151] imx_usb 53f80200.usb: No over current polarity defined [[0;32m OK [0m] Found device [0;1;39m/dev/ttymxc0[0m. [[0;32m OK [0m] Started [0;1;39mSerial Getty on ttymxc0[0m. [[0;32m OK [0m] Reached target [0;1;39mLogin Prompts[0m. [ 20.112776] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops imx_drm_exit [imxdrm]) [ 20.112962] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops imx_drm_exit [imxdrm]) [ 20.149332] imx-drm display-subsystem: bound 63ff0000.tve (ops imx_tve_ops [imx_tve]) [ 20.150103] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 0 [ 20.218846] usb_phy_generic usbphy-0: supply vcc not found, using dummy regulator [ 20.219164] usb_phy_generic usbphy-0: dummy supplies not allowed for exclusive requests [ 20.219383] usb_phy_generic usbphy-1: supply vcc not found, using dummy regulator [ 20.219565] usb_phy_generic usbphy-1: dummy supplies not allowed for exclusive requests [ 20.268897] Console: switching to colour frame buffer device 128x48 [ 20.286500] imx-drm display-subsystem: [drm] fb0: imx-drmdrmfb frame buffer device [ 20.330866] imx_usb 53f80000.usb: No over current polarity defined [ 20.747997] sgtl5000 1-000a: sgtl5000 revision 0x11 [ 20.752951] sgtl5000 1-000a: Using internal LDO instead of VDDD: check ER1 erratum [ 20.782121] imx_usb 53f80200.usb: No over current polarity defined [ 20.791959] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 20.792040] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 20.835874] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 20.837201] hub 1-0:1.0: USB hub found [ 20.837263] hub 1-0:1.0: 1 port detected [[0;32m OK [0m] Started [0;1;39mUser Login Management[0m. [[0;32m OK [0m] Reached target [0;1;39mMulti-User System[0m. [[0;32m OK [0m] Listening on [0;1;39mLoad/Save RF …itch Status /dev/rfkill Watch[0m. Debian GNU/Linux 11 debian-bullseye-armhf ttymxc0 debian-bullseye-armhf login: root (automatic login) Linux debian-bullseye-armhf 5.10.153-cip19-rt8 #1 SMP Wed Nov 9 22:00:51 UTC 2022 armv7l The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. / # / # export NFS_ROOTFS='/var/lib/lava/dispatcher/tmp/823142/extract-nfsrootfs-pmks807e' export NFS_ROOTFS='/var/lib/lava/dispatcher/tmp/823142/extract-nfsrootfs-pmks807e' / # export NFS_SERVER_IP='10.8.254.2' export NFS_SERVER_IP='10.8.254.2' / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-823142/environment . /lava-823142/environment / # /lava-823142/bin/lava-test-runner /lava-823142/0 /lava-823142/bin/lava-test-runner /lava-823142/0 + export TESTRUN_ID=0_dmesg + cd /lava-823142/0/tests/0_dmesg + cat uuid + UUID=823142_1.6.2.3.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 26.537659] [ 26.809718] [ 27.023722] + set +x # [ 27.226962] [ 27.228534] / # #export SHELL=/bin/sh / # export SHELL=/bin/sh. /lava-823142/environment / # . /lava-823142/environment/lava-823142/bin/lava-test-runner /lava-823142/1 / # /lava-823142/bin/lava-test-runner /lava-823142/1 + export TESTRUN_ID=1_bootrr + cd /lava-823142/1/tests/1_bootrr + cat uuid + UUID=823142_1.6.2.3.5 + set +x + export PATH=/opt/[ 28.092979] bootrr/helpers:/lava-823142/1/../bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin + cd /opt/bootrr + sh helpers/bootrr-auto /lava-823142/1/../bin/lava-test-case [ 29.252239] + set +x / #