Trying 192.168.56.23... Connected to conserv3. Escape character is '^]'. ser2net port telnet,3001 device serialdev, /dev/serial/by-path/platform-fd500000.pcie-pci-0000:01:00.0-usb-0:1.2.2.4:1.0-port0, 115200n81, local=false [,115200N81] (Debian GNU/Linux) U-Boot SPL 2023.01-rc4-00047-g3089d12a02 (Jan 01 2023 - 22:23:32 +0000) Trying to boot from MMC1 U-Boot 2023.01-rc4-00047-g3089d12a02 (Jan 01 2023 - 22:23 U-Boot SPL 2023.01-rc4-00047-g3089d12a02 (Jan 01 2023 - 22:23:32 +0000) Trying to boot from MMC1 U-Boot SPL 2023.01-rc4-00047-g3089d12a02 (Jan 01 2023 - 22:23:32 +0000) Trying to boot from MMC1 U-Boot 2023.01-rc4-00047-g3089d12a02 (Jan 01 2023 - 22:23:32 +0000) CPU : AM335X-GP rev 2.0 Model: TI AM335x BeagleBone Black DRAM: 512 MiB Core: 160 devices, 18 uclasses, devicetree: separate WDT: Started wdt@44e35000 with servicing every 1000ms (60s timeout) NAND: 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from FAT... Unable to read \"uboot.env\" from mmc0:1... not set. Validating first E-fuse MAC Net: eth2: ethernet@4a100000, eth3: usb_ether Hit any key to stop autoboot: 2  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp link up on port 0, speed 100, full duplex BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 42 *** Unhandled DHCP Option in OFFER/ACK: 42 DHCP client bound to address 192.168.56.204 (67 ms) => setenv serverip 192.168.56.123 setenv serverip 192.168.56.123 => tftp 0x82000000 651542/tftp-deploy-18nzz55h/kernel/zImage tftp 0x82000000 651542/tftp-deploy-18nzz55h/kernel/zImage link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 192.168.56.123; our IP address is 192.168.56.204 Filename '651542/tftp-deploy-18nzz55h/kernel/zImage'. Load address: 0x82000000 Loading: *################################################## 9.3 MiB 4.8 MiB/s done Bytes transferred = 9703936 (941200 hex) => tftp 0x83000000 651542/tftp-deploy-18nzz55h/ramdisk/ramdisk.cpio.gz.uboot tftp 0x83000000 651542/tftp-deploy-18nzz55h/ramdisk/ramdisk.cpio.gz.uboot link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 192.168.56.123; our IP address is 192.168.56.204 Filename '651542/tftp-deploy-18nzz55h/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x83000000 Loading: *################################################## 11.8 MiB 4.7 MiB/s done Bytes transferred = 12372228 (bcc904 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x88000000 651542/tftp-deploy-18nzz55h/dtb/am335x-boneblack.dtb tftp 0x88000000 651542/tftp-deploy-18nzz55h/dtb/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 192.168.56.123; our IP address is 192.168.56.204 Filename '651542/tftp-deploy-18nzz55h/dtb/am335x-boneblack.dtb'. Load address: 0x88000000 Loading: *################################################## 61.4 KiB 4 MiB/s done Bytes transferred = 62828 (f56c hex) => setenv bootargs 'console=ttyO0,115200n8 root=/dev/nfs rw nfsroot=192.168.56.123:/var/lib/lava/dispatcher/tmp/651542/extract-nfsrootfs-cy1ygq8w,tcp,hard console_msg_format=syslog earlycon ip=dhcp' setenv bootargs 'console=ttyO0,115200n8 root=/dev/nfs rw nfsroot=192.168.56.123:/var/lib/lava/dispatcher/tmp/651542/extract-nfsrootfs-cy1ygq8w,tcp,hard console_msg_format=syslog earlycon ip=dhcp' => bootz 0x82000000 0x83000000 0x88000000 bootz 0x82000000 0x83000000 0x88000000 Kernel image @ 0x82000000 [ 0x000000 - 0x941200 ] ## Loading init Ramdisk from Legacy Image at 83000000 ... Image Name: Created: 2023-06-22 11:54:31 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 12372164 Bytes = 11.8 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Working FDT set to 88000000 Using Device Tree in place at 88000000, end 8801256b Working FDT set to 88000000 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.184-cip36-rt14 (KernelCI@build-j76068-arm-gcc-10-defconfig-g56vc) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Thu Jun 22 10:07:02 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black [ 0.000000] earlycon: omap8250 at MMIO 0x44e09000 (options '') [ 0.000000] printk: bootconsole [omap8250] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x9b800000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] Normal empty [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] On node 0 totalpages: 130560 [ 0.000000] DMA zone: 1020 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 130560 pages, LIFO batch:31 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.0 (sgx neon) [ 0.000000] percpu: Embedded 16 pages/cpu s33676 r8192 d23668 u65536 [ 0.000000] pcpu-alloc: s33676 r8192 d23668 u65536 alloc=16*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129540 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/nfs rw nfsroot=192.168.56.123:/var/lib/lava/dispatcher/tmp/651542/extract-nfsrootfs-cy1ygq8w,tcp,hard console_msg_format=syslog earlycon ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 414392K/522240K available (14336K kernel code, 2332K rwdata, 5360K rodata, 2048K init, 417K bss, 42312K reserved, 65536K cma-reserved, 0K highmem) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=1. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts <6>[ 0.000000] TI gptimer clocksource: always-on /ocp/interconnect@44c00000/segment@200000/target-module@31000 <6>[ 0.000002] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns <6>[ 0.008332] clocksource: dmtimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns <6>[ 0.019054] TI gptimer clockevent: 24000000 Hz at /ocp/interconnect@48000000/segment@0/target-module@40000 <6>[ 0.033128] Console: colour dummy device 80x30 <3>[ 0.037998] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' <3>[ 0.045044] This ensures that you still see kernel messages. Please <3>[ 0.051763] update your kernel commandline. <6>[ 0.056366] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) <6>[ 0.096046] pid_max: default: 32768 minimum: 301 <6>[ 0.101238] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.109031] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.118035] CPU: Testing write buffer coherency: ok <6>[ 0.123428] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.129211] CPU0: thread -1, cpu 0, socket -1, mpidr 0 <6>[ 0.135520] Setting up static identity map for 0x80300000 - 0x803000ac <6>[ 0.144716] rcu: Hierarchical SRCU implementation. <6>[ 0.154547] EFI services will not be available. <6>[ 0.159720] smp: Bringing up secondary CPUs ... <6>[ 0.164648] smp: Brought up 1 node, 1 CPU <6>[ 0.169038] SMP: Total of 1 processors activated (996.14 BogoMIPS). <6>[ 0.175769] CPU: All CPU(s) started in SVC mode. <6>[ 0.181387] devtmpfs: initialized <6>[ 0.195881] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 <6>[ 0.204415] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.214844] futex hash table entries: 256 (order: 2, 16384 bytes, linear) <6>[ 0.226018] pinctrl core: initialized pinctrl subsystem <6>[ 0.234370] DMI not present or invalid. <6>[ 0.239425] NET: Registered protocol family 16 <6>[ 0.246782] DMA: preallocated 256 KiB pool for atomic coherent allocations <3>[ 0.273453] l3-aon-clkctrl:0000:0: failed to disable <6>[ 0.281629] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.281833] cpuidle: using governor menu <6>[ 1.354910] No ATAGs? <6>[ 1.357540] hw-breakpoint: debug architecture 0x4 unsupported. <6>[ 1.372181] Serial: AMBA PL011 UART driver <6>[ 1.410719] iommu: Default domain type: Translated <6>[ 1.416465] vgaarb: loaded <5>[ 1.420607] SCSI subsystem initialized <7>[ 1.425291] libata version 3.00 loaded. <6>[ 1.429913] usbcore: registered new interface driver usbfs <6>[ 1.435871] usbcore: registered new interface driver hub <6>[ 1.441692] usbcore: registered new device driver usb <6>[ 1.448966] pps_core: LinuxPPS API ver. 1 registered <6>[ 1.454400] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 1.464098] PTP clock support registered <6>[ 1.472255] clocksource: Switched to clocksource dmtimer <6>[ 2.442728] NET: Registered protocol family 2 <6>[ 2.447765] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 2.456259] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) <6>[ 2.465192] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) <6>[ 2.473473] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) <6>[ 2.481126] TCP: Hash tables configured (established 4096 bind 4096) <6>[ 2.488046] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 2.495069] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 2.502662] NET: Registered protocol family 1 <6>[ 2.508286] RPC: Registered named UNIX socket transport module. <6>[ 2.514733] RPC: Registered udp transport module. <6>[ 2.519838] RPC: Registered tcp transport module. <6>[ 2.524956] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 2.531854] PCI: CLS 0 bytes, default 64 <6>[ 2.536866] Trying to unpack rootfs image as initramfs... <6>[ 3.317319] Freeing initrd memory: 12084K <6>[ 3.322855] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available <5>[ 3.333279] Initialise system trusted keyrings <6>[ 3.338612] workingset: timestamp_bits=30 max_order=17 bucket_order=0 <6>[ 3.351697] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 3.359051] NFS: Registering the id_resolver key type <5>[ 3.364664] Key type id_resolver registered <5>[ 3.369235] Key type id_legacy registered <6>[ 3.373759] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 3.380926] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <6>[ 3.388864] ntfs: driver 2.1.32 [Flags: R/O]. <5>[ 3.394224] Key type asymmetric registered <5>[ 3.398715] Asymmetric key parser 'x509' registered <6>[ 3.404095] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) <6>[ 3.411971] io scheduler mq-deadline registered <6>[ 3.416916] io scheduler kyber registered <3>[ 3.572440] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.581069] omap_gpio 44e07000.gpio: Could not register gpio chip -517 <4>[ 3.701934] ti-sysc: probe of 44e31000.target-module failed with error -16 <4>[ 3.747665] ti-sysc: probe of 48040000.target-module failed with error -16 <3>[ 3.826602] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.835303] omap_gpio 4804c000.gpio: Could not register gpio chip -517 <3>[ 3.901188] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.909888] omap_gpio 481ac000.gpio: Could not register gpio chip -517 <3>[ 3.928550] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.937246] omap_gpio 481ae000.gpio: Could not register gpio chip -517 <3>[ 4.006755] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present! <6>[ 4.015310] edma 49000000.dma: TI EDMA DMA engine driver <6>[ 4.058175] pinctrl-single 44e10800.pinmux: 142 pins, size 568 <6>[ 4.162774] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled <6>[ 4.175152] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 20, base_baud = 3000000) is a 8250 <6>[ 4.184668] printk: console [ttyS0] enabled <6>[ 4.184668] printk: console [ttyS0] enabled <6>[ 4.193738] printk: bootconsole [omap8250] disabled <6>[ 4.193738] printk: bootconsole [omap8250] disabled <6>[ 4.207545] SuperH (H)SCI(F) driver initialized <6>[ 4.214697] msm_serial: driver initialized <6>[ 4.219469] STMicroelectronics ASC driver initialized <6>[ 4.227680] STM32 USART driver initialized <6>[ 4.235188] omap_rng 48310000.rng: Random Number Generator ver. 20 <5>[ 4.254753] random: crng init done <6>[ 4.268238] brd: module loaded <6>[ 4.279341] loop: module loaded <6>[ 4.304930] CAN device driver interface <6>[ 4.310891] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded <6>[ 4.319261] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 4.324602] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 4.330918] igb: Intel(R) Gigabit Ethernet Network Driver <6>[ 4.336632] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 4.412269] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000 <6>[ 4.436125] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 <6>[ 4.446042] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4 <6>[ 4.452753] cpsw 4a100000.ethernet: ALE Table size 1024 <6>[ 4.458517] cpsw 4a100000.ethernet: Detected MACID = c8:a0:30:c2:c5:7d <6>[ 4.467651] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver <6>[ 4.475566] usbcore: registered new interface driver pegasus <6>[ 4.481564] usbcore: registered new interface driver asix <6>[ 4.487315] usbcore: registered new interface driver ax88179_178a <6>[ 4.493753] usbcore: registered new interface driver cdc_ether <6>[ 4.499914] usbcore: registered new interface driver smsc75xx <6>[ 4.506013] usbcore: registered new interface driver smsc95xx <6>[ 4.512077] usbcore: registered new interface driver net1080 <6>[ 4.518072] usbcore: registered new interface driver cdc_subset <6>[ 4.524337] usbcore: registered new interface driver zaurus <6>[ 4.530271] usbcore: registered new interface driver cdc_ncm <6>[ 4.541681] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>[ 4.548633] ehci-pci: EHCI PCI platform driver <6>[ 4.553444] ehci-platform: EHCI generic platform driver <6>[ 4.559457] ehci-orion: EHCI orion driver <6>[ 4.564192] SPEAr-ehci: EHCI SPEAr driver <6>[ 4.568799] ehci-st: EHCI STMicroelectronics driver <6>[ 4.574320] ehci-exynos: EHCI Exynos driver <6>[ 4.579076] ehci-atmel: EHCI Atmel driver <6>[ 4.583720] tegra-ehci: Tegra EHCI driver <6>[ 4.588338] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver <6>[ 4.594910] ohci-pci: OHCI PCI platform driver <6>[ 4.599715] ohci-platform: OHCI generic platform driver <6>[ 4.605703] SPEAr-ohci: OHCI SPEAr driver <6>[ 4.610303] ohci-st: OHCI STMicroelectronics driver <6>[ 4.615826] ohci-atmel: OHCI Atmel driver <6>[ 4.622037] usbcore: registered new interface driver usb-storage <6>[ 4.639328] i2c /dev entries driver <5>[ 4.671901] cpuidle: enable-method property 'ti,am3352' found operations <6>[ 4.680294] sdhci: Secure Digital Host Controller Interface driver <6>[ 4.686846] sdhci: Copyright(c) Pierre Ossman <6>[ 4.695923] Synopsys Designware Multimedia Card Interface Driver <6>[ 4.705351] sdhci-pltfm: SDHCI platform and OF driver helper <4>[ 4.720181] sdhci-omap 481d8000.mmc: supply vqmmc not found, using dummy regulator <6>[ 4.755065] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 4.764741] usbcore: registered new interface driver usbhid <6>[ 4.770687] usbhid: USB HID core driver <6>[ 4.784443] NET: Registered protocol family 10 <6>[ 4.790688] Segment Routing with IPv6 <6>[ 4.794842] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 4.801791] NET: Registered protocol family 17 <6>[ 4.806619] can: controller area network core <6>[ 4.811344] NET: Registered protocol family 29 <6>[ 4.816099] can: raw protocol <6>[ 4.819345] can: broadcast manager protocol <6>[ 4.823830] can: netlink gateway - max_hops=1 <5>[ 4.829222] Key type dns_resolver registered <6>[ 4.834011] ThumbEE CPU extension supported. <5>[ 4.838581] Registering SWP/SWPB emulation handler <3>[ 4.844112] omap_voltage_late_init: Voltage driver support not added <6>[ 4.852426] mmc1: SDHCI controller on 481d8000.mmc [481d8000.mmc] using External DMA <6>[ 4.861534] printk: console [ttyS0]: printing thread started <5>[ 4.861582] Loading compiled-in X.509 certificates <6>[ 4.877963] OMAP GPIO hardware version 0.1 <4>[ 4.922842] tps65217-pmic: Failed to locate of_node [id: -1] <4>[ 4.929980] tps65217-bl: Failed to locate of_node [id: -1] <6>[ 4.951001] tps65217 0-0024: TPS65217 ID 0xe version 1.2 <4>[ 4.951725] at24 0-0050: supply vcc not found, using dummy regulator <6>[ 4.964853] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write <6>[ 4.965662] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz <4>[ 4.969578] at24 2-0054: supply vcc not found, using dummy regulator <4>[ 4.996248] at24 2-0055: supply vcc not found, using dummy regulator <6>[ 4.996906] mmc1: new high speed MMC card at address 0001 <6>[ 4.997787] mmcblk1: mmc1:0001 MMC02G 1.79 GiB <6>[ 4.998100] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB <6>[ 4.998419] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB <6>[ 4.998676] mmcblk1rpmb: mmc1:0001 MMC02G partition 3 128 KiB, chardev (235:0) <4>[ 5.044506] at24 2-0056: supply vcc not found, using dummy regulator <4>[ 5.076389] at24 2-0057: supply vcc not found, using dummy regulator <6>[ 5.105964] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz <6>[ 5.129769] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22) <6>[ 5.129801] sdhci-omap 48060000.mmc: Got CD GPIO <4>[ 5.130000] sdhci-omap 48060000.mmc: supply vqmmc not found, using dummy regulator <6>[ 5.205575] mmc0: SDHCI controller on 48060000.mmc [48060000.mmc] using External DMA <6>[ 5.207745] cpsw 4a100000.ethernet: initializing cpsw version 1.12 (0) <6>[ 5.258921] mmc0: new high speed SDHC card at address 0001 <6>[ 5.260835] mmcblk0: mmc0:0001 EB1QT 29.8 GiB <6>[ 5.275327] mmcblk0: p1 <6>[ 5.286592] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL) <6>[ 7.393184] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off <6>[ 7.412704] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 7.442423] Sending DHCP requests ..., OK <6>[ 14.062354] IP-Config: Got DHCP answer from 192.168.56.254, my address is 192.168.56.204 <6>[ 14.062407] IP-Config: Complete: <6>[ 14.062417] device=eth0, hwaddr=c8:a0:30:c2:c5:7d, ipaddr=192.168.56.204, mask=255.255.255.0, gw=192.168.56.254 <6>[ 14.062456] host=192.168.56.204, domain=mayfield.sirena.org.uk, nis-domain=(none) <6>[ 14.062473] bootserver=192.168.56.254, rootserver=192.168.56.123, rootpath= <6>[ 14.062495] nameserver0=192.168.56.254 <6>[ 14.062525] ntpserver0=50.205.244.22, ntpserver1=85.199.214.99 <6>[ 14.075137] Freeing unused kernel memory: 2048K Loading, please wait... <6>[ 14.143334] Run /init as init process Starting version 247.3-7+deb11u2 <4>[ 17.026894] am335x-phy-driver 47401300.usb-phy: supply vcc not found, using dummy regulator <4>[ 17.027221] am335x-phy-driver 47401300.usb-phy: dummy supplies not allowed for exclusive requests <4>[ 17.213866] am335x-phy-driver 47401b00.usb-phy: supply vcc not found, using dummy regulator <4>[ 17.214200] am335x-phy-driver 47401b00.usb-phy: dummy supplies not allowed for exclusive requests <6>[ 17.280376] musb-hdrc musb-hdrc.1: MUSB HDRC host driver <6>[ 17.280428] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 17.374236] hub 1-0:1.0: USB hub found <6>[ 17.376556] hub 1-0:1.0: 1 port detected <6>[ 17.812343] usb 1-1: new low-speed USB device number 2 using musb-hdrc <3>[ 17.962387] usb 1-1: device descriptor read/64, error -71 <3>[ 18.322402] usb 1-1: device descriptor read/64, error -71 <6>[ 18.593537] usb 1-1: new low-speed USB device number 3 using musb-hdrc <3>[ 18.743364] usb 1-1: device descriptor read/64, error -71 <3>[ 19.012462] usb 1-1: device descriptor read/64, error -71 <6>[ 19.133551] usb usb1-port1: attempt power cycle <6>[ 19.352390] usb 1-1: new low-speed USB device number 4 using musb-hdrc <6>[ 19.942473] usb 1-1: new low-speed USB device number 5 using musb-hdrc Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/nfs-top ... done. Begin: Running /scripts/nfs-premount ... Waiting up to 60 secs for any ethernet to become available Device /sys/class/net/eth0 found done. IP-Config: eth0 hardware address c8:a0:30:c2:c5:7d mtu 1500 DHCP IP-Config: eth0 complete (dhcp from 192.168.56.254): address: 192.168.56.204 broadcast: 192.168.56.255 netmask: 255.255.255.0 gateway: 192.168.56.254 dns0 : 192.168.56.254 dns1 : 0.0.0.0 domain : mayfield.sirena.org.uk rootserver: 192.168.56.254 rootpath: filename : connect: Connection refused read: Connection refused read: Connection refused read: Connection refused read: Connection refused read: Connection refused read: Connection refused read: Connection refused read: Connection refused read: Connection refused read: Connection refused read: Connection refused read: Connection refused read: Connection refused read: Connection refused read: Connection refused read: Connection refused read: Connection refused read: Connection refused read: Connection refused read: Connection refused read: Connection refused read: Connection refused read: Connection refused read: Connection refused read: Connection refused read: Connection refused read: Connection refused read: Connection refused read: Connection refused read: Connection refused read: Connection refused read: Connection refused read: Connection refused read: Connection refused read: Connection refused read: Connection refused read: Connection refused read: Connection refused read: Connection refused read: Connection refused read: Connection refused read: Connection refused read: Connection refused read: Connection refused read: Connection refused read: Connection refused read: Connection refused read: Connection refused read: Connection refused read: Connection refused NFS over TCP not available from 192.168.56.123 Begin: Retrying nfs mount ... connect: Connection refused read: Connection refused read: Connection refused read: Connection refused read: Connection refused read: Connection refused read: Connection refused read: Connection refused read: Connection refused read: Connection refused read: Connection refused read: Connection refused