Connected to bbb-patersonc-01 console [channel connected] (~$quit to exit) U-Boot SPL 2020.10 (Apr 28 2023 - 11:09:01 +0100) Trying to boot from MMC2 U-Boot 2020.10 (Apr 28 2023 - 11:09:01 +0100) CPU : AM335X-GP rev 2.1 Model: TI AM335x BeagleBone Black DRAM: 512 MiB WDT: Started with servicing (60s timeout) MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from FAT... Unable to use mmc 1:1... not set. Validating first E-fuse MAC Net: eth2: ethernet@4a100000, eth3: usb_ether Hit any key to stop autoboot: 2 0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp link up on port 0, speed 100, full duplex BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 DHCP client bound to address 192.168.1.23 (1028 ms) => setenv serverip 192.168.1.1 setenv serverip 192.168.1.1 => tftp 0x82000000 971157/tftp-deploy-_ttv9h9k/kernel/zImage tftp 0x82000000 971157/tftp-deploy-_ttv9h9k/kernel/zImage link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 192.168.1.1; our IP address is 192.168.1.23 Filename '971157/tftp-deploy-_ttv9h9k/kernel/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############ 3.9 MiB/s done Bytes transferred = 9703936 (941200 hex) => tftp 0x83000000 971157/tftp-deploy-_ttv9h9k/ramdisk/ramdisk.cpio.gz.uboot tftp 0x83000000 971157/tftp-deploy-_ttv9h9k/ramdisk/ramdisk.cpio.gz.uboot link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 192.168.1.1; our IP address is 192.168.1.23 Filename '971157/tftp-deploy-_ttv9h9k/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x83000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ######################################################## 2.4 MiB/s done Bytes transferred = 16080826 (f55fba hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x88000000 971157/tftp-deploy-_ttv9h9k/dtb/am335x-boneblack.dtb tftp 0x88000000 971157/tftp-deploy-_ttv9h9k/dtb/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 192.168.1.1; our IP address is 192.168.1.23 Filename '971157/tftp-deploy-_ttv9h9k/dtb/am335x-boneblack.dtb'. Load address: 0x88000000 Loading: *##### 2.1 MiB/s done Bytes transferred = 62828 (f56c hex) => setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' => bootz 0x82000000 0x83000000 0x88000000 bootz 0x82000000 0x83000000 0x88000000 ## Loading init Ramdisk from Legacy Image at 83000000 ... Image Name: Created: 2023-06-22 10:53:04 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 16080762 Bytes = 15.3 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Using Device Tree in place at 88000000, end 8801256b Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.184-cip36-rt14 (KernelCI@build-j76105-arm-gcc-10-multi-v7-defconfig-r7tw2) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Thu Jun 22 10:14:33 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black [ 0.000000] earlycon: omap8250 at MMIO 0x44e09000 (options '') [ 0.000000] printk: bootconsole [omap8250] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x9b800000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] Normal empty [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] On node 0 totalpages: 130560 [ 0.000000] DMA zone: 1020 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 130560 pages, LIFO batch:31 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.1 (sgx neon) [ 0.000000] percpu: Embedded 16 pages/cpu s33676 r8192 d23668 u65536 [ 0.000000] pcpu-alloc: s33676 r8192 d23668 u65536 alloc=16*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129540 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 410772K/522240K available (14336K kernel code, 2332K rwdata, 5360K rodata, 2048K init, 417K bss, 45932K reserved, 65536K cma-reserved, 0K highmem) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=1. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts <6>[ 0.000000] TI gptimer clocksource: always-on /ocp/interconnect@44c00000/segment@200000/target-module@31000 <6>[ 0.000002] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns <6>[ 0.008329] clocksource: dmtimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns <6>[ 0.019052] TI gptimer clockevent: 24000000 Hz at /ocp/interconnect@48000000/segment@0/target-module@40000 <6>[ 0.033126] Console: colour dummy device 80x30 <3>[ 0.037993] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' <3>[ 0.045040] This ensures that you still see kernel messages. Please <3>[ 0.051757] update your kernel commandline. <6>[ 0.056359] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) <6>[ 0.096043] pid_max: default: 32768 minimum: 301 <6>[ 0.101235] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.109028] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.118018] CPU: Testing write buffer coherency: ok <6>[ 0.123404] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.129188] CPU0: thread -1, cpu 0, socket -1, mpidr 0 <6>[ 0.135493] Setting up static identity map for 0x80300000 - 0x803000ac <6>[ 0.144677] rcu: Hierarchical SRCU implementation. <6>[ 0.154529] EFI services will not be available. <6>[ 0.159710] smp: Bringing up secondary CPUs ... <6>[ 0.164636] smp: Brought up 1 node, 1 CPU <6>[ 0.169025] SMP: Total of 1 processors activated (996.14 BogoMIPS). <6>[ 0.175757] CPU: All CPU(s) started in SVC mode. <6>[ 0.181368] devtmpfs: initialized <6>[ 0.195817] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 <6>[ 0.204352] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.214781] futex hash table entries: 256 (order: 2, 16384 bytes, linear) <6>[ 0.225868] pinctrl core: initialized pinctrl subsystem <6>[ 0.234208] DMI not present or invalid. <6>[ 0.239177] NET: Registered protocol family 16 <6>[ 0.246601] DMA: preallocated 256 KiB pool for atomic coherent allocations <3>[ 0.273210] l3-aon-clkctrl:0000:0: failed to disable <6>[ 0.281414] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.281617] cpuidle: using governor menu <6>[ 1.354310] No ATAGs? <6>[ 1.356940] hw-breakpoint: debug architecture 0x4 unsupported. <6>[ 1.371489] Serial: AMBA PL011 UART driver <6>[ 1.409887] iommu: Default domain type: Translated <6>[ 1.415639] vgaarb: loaded <5>[ 1.419791] SCSI subsystem initialized <7>[ 1.424467] libata version 3.00 loaded. <6>[ 1.428999] usbcore: registered new interface driver usbfs <6>[ 1.435047] usbcore: registered new interface driver hub <6>[ 1.440848] usbcore: registered new device driver usb <6>[ 1.448129] pps_core: LinuxPPS API ver. 1 registered <6>[ 1.453557] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 1.463252] PTP clock support registered <6>[ 1.471455] clocksource: Switched to clocksource dmtimer <6>[ 2.441623] NET: Registered protocol family 2 <6>[ 2.446661] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 2.455138] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) <6>[ 2.464073] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) <6>[ 2.472357] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) <6>[ 2.480012] TCP: Hash tables configured (established 4096 bind 4096) <6>[ 2.486926] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 2.493949] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 2.501542] NET: Registered protocol family 1 <6>[ 2.507156] RPC: Registered named UNIX socket transport module. <6>[ 2.513603] RPC: Registered udp transport module. <6>[ 2.518707] RPC: Registered tcp transport module. <6>[ 2.523827] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 2.530722] PCI: CLS 0 bytes, default 64 <6>[ 2.535737] Trying to unpack rootfs image as initramfs... <6>[ 3.598567] Freeing initrd memory: 15704K <6>[ 3.604262] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available <5>[ 3.614635] Initialise system trusted keyrings <6>[ 3.620030] workingset: timestamp_bits=30 max_order=17 bucket_order=0 <6>[ 3.633260] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 3.640483] NFS: Registering the id_resolver key type <5>[ 3.646113] Key type id_resolver registered <5>[ 3.650683] Key type id_legacy registered <6>[ 3.655209] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 3.662410] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <6>[ 3.670324] ntfs: driver 2.1.32 [Flags: R/O]. <5>[ 3.675692] Key type asymmetric registered <5>[ 3.680186] Asymmetric key parser 'x509' registered <6>[ 3.685567] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) <6>[ 3.693463] io scheduler mq-deadline registered <6>[ 3.698387] io scheduler kyber registered <3>[ 3.853765] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.862458] omap_gpio 44e07000.gpio: Could not register gpio chip -517 <4>[ 3.983257] ti-sysc: probe of 44e31000.target-module failed with error -16 <4>[ 4.028837] ti-sysc: probe of 48040000.target-module failed with error -16 <3>[ 4.107664] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 4.116400] omap_gpio 4804c000.gpio: Could not register gpio chip -517 <3>[ 4.182317] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 4.190944] omap_gpio 481ac000.gpio: Could not register gpio chip -517 <3>[ 4.209581] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 4.218279] omap_gpio 481ae000.gpio: Could not register gpio chip -517 <3>[ 4.287613] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present! <6>[ 4.296167] edma 49000000.dma: TI EDMA DMA engine driver <6>[ 4.338927] pinctrl-single 44e10800.pinmux: 142 pins, size 568 <6>[ 4.443588] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled <6>[ 4.455908] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 20, base_baud = 3000000) is a 8250 <6>[ 4.465423] printk: console [ttyS0] enabled <6>[ 4.465423] printk: console [ttyS0] enabled <6>[ 4.474488] printk: bootconsole [omap8250] disabled <6>[ 4.474488] printk: bootconsole [omap8250] disabled <6>[ 4.488265] SuperH (H)SCI(F) driver initialized <6>[ 4.495396] msm_serial: driver initialized <6>[ 4.500184] STMicroelectronics ASC driver initialized <6>[ 4.508367] STM32 USART driver initialized <6>[ 4.515843] omap_rng 48310000.rng: Random Number Generator ver. 20 <5>[ 4.535263] random: crng init done <6>[ 4.548722] brd: module loaded <6>[ 4.559818] loop: module loaded <6>[ 4.585225] CAN device driver interface <6>[ 4.591192] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded <6>[ 4.599590] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 4.604909] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 4.611219] igb: Intel(R) Gigabit Ethernet Network Driver <6>[ 4.616931] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 4.691484] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000 <6>[ 4.728129] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 <6>[ 4.738056] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4 <6>[ 4.744758] cpsw 4a100000.ethernet: ALE Table size 1024 <6>[ 4.750590] cpsw 4a100000.ethernet: Detected MACID = f4:b8:98:ab:fa:84 <6>[ 4.759723] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver <6>[ 4.767683] usbcore: registered new interface driver pegasus <6>[ 4.773720] usbcore: registered new interface driver asix <6>[ 4.779447] usbcore: registered new interface driver ax88179_178a <6>[ 4.785890] usbcore: registered new interface driver cdc_ether <6>[ 4.792072] usbcore: registered new interface driver smsc75xx <6>[ 4.798143] usbcore: registered new interface driver smsc95xx <6>[ 4.804242] usbcore: registered new interface driver net1080 <6>[ 4.810218] usbcore: registered new interface driver cdc_subset <6>[ 4.816472] usbcore: registered new interface driver zaurus <6>[ 4.822421] usbcore: registered new interface driver cdc_ncm <6>[ 4.833980] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>[ 4.840821] ehci-pci: EHCI PCI platform driver <6>[ 4.845657] ehci-platform: EHCI generic platform driver <6>[ 4.851705] ehci-orion: EHCI orion driver <6>[ 4.856384] SPEAr-ehci: EHCI SPEAr driver <6>[ 4.860973] ehci-st: EHCI STMicroelectronics driver <6>[ 4.866503] ehci-exynos: EHCI Exynos driver <6>[ 4.871255] ehci-atmel: EHCI Atmel driver <6>[ 4.875886] tegra-ehci: Tegra EHCI driver <6>[ 4.880499] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver <6>[ 4.887059] ohci-pci: OHCI PCI platform driver <6>[ 4.891886] ohci-platform: OHCI generic platform driver <6>[ 4.897831] SPEAr-ohci: OHCI SPEAr driver <6>[ 4.902491] ohci-st: OHCI STMicroelectronics driver <6>[ 4.907948] ohci-atmel: OHCI Atmel driver <6>[ 4.914231] usbcore: registered new interface driver usb-storage <6>[ 4.931367] i2c /dev entries driver <5>[ 4.963879] cpuidle: enable-method property 'ti,am3352' found operations <6>[ 4.972253] sdhci: Secure Digital Host Controller Interface driver <6>[ 4.978738] sdhci: Copyright(c) Pierre Ossman <6>[ 4.987739] Synopsys Designware Multimedia Card Interface Driver <6>[ 4.997171] sdhci-pltfm: SDHCI platform and OF driver helper <4>[ 5.012036] sdhci-omap 481d8000.mmc: supply vqmmc not found, using dummy regulator <6>[ 5.046650] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 5.056218] usbcore: registered new interface driver usbhid <6>[ 5.062224] usbhid: USB HID core driver <6>[ 5.075870] NET: Registered protocol family 10 <6>[ 5.082209] Segment Routing with IPv6 <6>[ 5.086250] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 5.093252] NET: Registered protocol family 17 <6>[ 5.098005] can: controller area network core <6>[ 5.102801] NET: Registered protocol family 29 <6>[ 5.107534] can: raw protocol <6>[ 5.110778] can: broadcast manager protocol <6>[ 5.115275] can: netlink gateway - max_hops=1 <5>[ 5.120676] Key type dns_resolver registered <6>[ 5.125443] ThumbEE CPU extension supported. <5>[ 5.130015] Registering SWP/SWPB emulation handler <3>[ 5.135558] omap_voltage_late_init: Voltage driver support not added <6>[ 5.143805] mmc1: SDHCI controller on 481d8000.mmc [481d8000.mmc] using External DMA <6>[ 5.153039] printk: console [ttyS0]: printing thread started <5>[ 5.153088] Loading compiled-in X.509 certificates <6>[ 5.169366] OMAP GPIO hardware version 0.1 <4>[ 5.212047] tps65217-pmic: Failed to locate of_node [id: -1] <4>[ 5.219056] tps65217-bl: Failed to locate of_node [id: -1] <6>[ 5.240092] tps65217 0-0024: TPS65217 ID 0xe version 1.2 <4>[ 5.240814] at24 0-0050: supply vcc not found, using dummy regulator <6>[ 5.253919] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write <6>[ 5.254700] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz <4>[ 5.258381] at24 2-0054: supply vcc not found, using dummy regulator <4>[ 5.285067] at24 2-0055: supply vcc not found, using dummy regulator <6>[ 5.288324] mmc1: new high speed MMC card at address 0001 <6>[ 5.289244] mmcblk1: mmc1:0001 MK2704 3.53 GiB <6>[ 5.289570] mmcblk1boot0: mmc1:0001 MK2704 partition 1 2.00 MiB <6>[ 5.289896] mmcblk1boot1: mmc1:0001 MK2704 partition 2 2.00 MiB <6>[ 5.290253] mmcblk1rpmb: mmc1:0001 MK2704 partition 3 512 KiB, chardev (235:0) <6>[ 5.328981] mmcblk1: p1 <4>[ 5.332045] at24 2-0056: supply vcc not found, using dummy regulator <4>[ 5.365089] at24 2-0057: supply vcc not found, using dummy regulator <6>[ 5.395178] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz <6>[ 5.418866] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22) <6>[ 5.418898] sdhci-omap 48060000.mmc: Got CD GPIO <4>[ 5.419089] sdhci-omap 48060000.mmc: supply vqmmc not found, using dummy regulator <6>[ 5.521065] mmc0: SDHCI controller on 48060000.mmc [48060000.mmc] using External DMA <6>[ 5.524748] cpsw 4a100000.ethernet: initializing cpsw version 1.12 (0) <6>[ 5.653302] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL) <6>[ 8.832349] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off <6>[ 8.861578] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 8.891637] Sending DHCP requests ., OK <6>[ 8.931814] IP-Config: Got DHCP answer from 192.168.1.1, my address is 192.168.1.23 <6>[ 8.931863] IP-Config: Complete: <6>[ 8.931872] device=eth0, hwaddr=f4:b8:98:ab:fa:84, ipaddr=192.168.1.23, mask=255.255.255.0, gw=192.168.1.1 <6>[ 8.931909] host=192.168.1.23, domain=example.org, nis-domain=(none) <6>[ 8.931926] bootserver=0.0.0.0, rootserver=0.0.0.0, rootpath= <6>[ 8.931947] nameserver0=192.168.1.1 <6>[ 8.944713] Freeing unused kernel memory: 2048K <6>[ 9.004022] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 9.207614] udevd[98]: starting version 3.2.9 <27>[ 9.224138] udevd[98]: specified user 'tss' unknown <27>[ 9.224350] udevd[98]: specified group 'tss' unknown <30>[ 9.244590] udevd[99]: starting eudev-3.2.9 <4>[ 10.994489] am335x-phy-driver 47401300.usb-phy: supply vcc not found, using dummy regulator <4>[ 10.994808] am335x-phy-driver 47401300.usb-phy: dummy supplies not allowed for exclusive requests <4>[ 11.035357] am335x-phy-driver 47401b00.usb-phy: supply vcc not found, using dummy regulator <4>[ 11.035669] am335x-phy-driver 47401b00.usb-phy: dummy supplies not allowed for exclusive requests <6>[ 11.175102] musb-hdrc musb-hdrc.1: MUSB HDRC host driver <6>[ 11.175152] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 11.282683] hub 1-0:1.0: USB hub found <6>[ 11.282771] hub 1-0:1.0: 1 port detected done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-971157/environment . /lava-971157/environment / # /lava-971157/bin/lava-test-runner /lava-971157/0 /lava-971157/bin/lava-test-runner /lava-971157/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-971157/0/tests/0_dmesg + cat uuid + UUID=971157_1.5.2.4.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 16.526164] <8>[ 16.582475] <8>[ 16.633785] + set +x / # <8>[ 16.685131] <8>[ 16.686940] # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-971157/environment / # . /lava-971157/environment/lava-971157/bin/lava-test-runner /lava-971157/1 / # /lava-971157/bin/lava-test-runner /lava-971157/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-971157/1/tests/1_bootrr + cat uuid + UUID=971157_1.5.2.4.5 + <8>[ 17.240034] set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-971157/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto sound /lava-971157/1/../bin/lava-test-case <8>[ 18.330051] /lava-971157/1/../bin/lava-test-case <8>[ 18.378962] /lava-971157/1/../bin/lava-test-case <8>[ 18.408772] /lava-971157/1/../bin/lava-test-case <8>[ 18.463590] /lava-971157/1/../bin/lava-test-case <8>[ 18.509978] /lava-971157/1/../bin/lava-test-case <8>[ 18.546971] /lava-971157/1/../bin/lava-test-case <8>[ 18.593161] /lava-971157/1/../bin/lava-test-case <8>[ 18.637832] /lava-971157/1/../bin/lava-test-case <8>[ 18.674638] /lava-971157/1/../bin/lava-test-case <8>[ 18.734296] /lava-971157/1/../bin/lava-test-case <8>[ 19.798317] /lava-971157/1/../bin/lava-test-case <8>[ 20.859786] /lava-971157/1/../bin/lava-test-case <8>[ 20.896294] /lava-971157/1/../bin/lava-test-case <8>[ 20.932393] /lava-971157/1/../bin/lava-test-case <8>[ 20.969504] /lava-971157/1/../bin/lava-test-case <8>[ 21.014603] /lava-971157/1/../bin/lava-test-case <8>[ 21.052294] /lava-971157/1/../bin/lava-test-case <8>[ 21.097866] /lava-971157/1/../bin/lava-test-case <8>[ 21.143029] /lava-971157/1/../bin/lava-test-case <8>[ 21.179723] /lava-971157/1/../bin/lava-test-case <8>[ 21.225872] /lava-971157/1/../bin/lava-test-case <8>[ 21.271299] /lava-971157/1/../bin/lava-test-case <8>[ 21.308943] /lava-971157/1/../bin/lava-test-case <8>[ 21.355356] /lava-971157/1/../bin/lava-test-case <8>[ 21.392885] /lava-971157/1/../bin/lava-test-case <8>[ 21.438285] /lava-971157/1/../bin/lava-test-case <8>[ 22.500474] /lava-971157/1/../bin/lava-test-case <8>[ 23.562504] /lava-971157/1/../bin/lava-test-case <8>[ 23.602960] /lava-971157/1/../bin/lava-test-case <8>[ 23.649062] /lava-971157/1/../bin/lava-test-case <8>[ 23.686701] /lava-971157/1/../bin/lava-test-case <8>[ 23.732299] /lava-971157/1/../bin/lava-test-case <8>[ 24.797149] /lava-971157/1/../bin/lava-test-case <8>[ 25.860472] /lava-971157/1/../bin/lava-test-case <8>[ 25.897657] /lava-971157/1/../bin/lava-test-case <8>[ 25.943874] /lava-971157/1/../bin/lava-test-case <8>[ 27.008129] /lava-971157/1/../bin/lava-test-case <8>[ 28.063745] /lava-971157/1/../bin/lava-test-case <8>[ 29.130016] /lava-971157/1/../bin/lava-test-case <8>[ 30.191123] /lava-971157/1/../bin/lava-test-case <8>[ 31.251395] /lava-971157/1/../bin/lava-test-case <8>[ 32.317552] /lava-971157/1/../bin/lava-test-case <8>[ 33.379864] /lava-971157/1/../bin/lava-test-case <8>[ 34.440611] /lava-971157/1/../bin/lava-test-case <8>[ 35.501020] /lava-971157/1/../bin/lava-test-case <8>[ 36.562099] /lava-971157/1/../bin/lava-test-case <8>[ 37.627331] /lava-971157/1/../bin/lava-test-case <8>[ 38.690454] /lava-971157/1/../bin/lava-test-case <8>[ 39.750918] /opt/bootrr/libexec/bootrr/boards/ti,am335x-bone-black: line 84: assert_device-present: not found /lava-971157/1/../bin/lava-test-case <8>[ 39.789591] /lava-971157/1/../bin/lava-test-case <8>[ 40.860451] /lava-971157/1/../bin/lava-test-case <8>[ 41.920346] + set +x / # <8>[ 41.936060]