Trying 192.168.1.205... Connected to ts5. Escape character is '^]'. ser2net port telnet,2002 device serialdev,/dev/ttyUSB-lf-bbb-02,115200n81,local [] (Debian GNU/Linux) U-Boot SPL 2021.10-nethacked-for-LAVA_hws@denx.de-dirty (Oct 19 2021 - 19:02:35 +0200) Trying to boot from MMC2 U-Boot 2021.10-nethacked-for-LAVA_hws@denx.de-dirty (Oct 19 2021 - 19:02:35 +0200) CPU : AM335X-GP rev 2.1 Model: TI AM335x BeagleBone Black DRAM: 512 MiB WDT: Started with servicing (60s timeout) NAND: 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from FAT... not set. Validating first E-fuse MAC Net: eth2: ethernet@4a100000, eth3: usb_ether Hit any key to stop autoboot: 2 0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp link up on port 0, speed 100, full duplex BOOTP broadcast 1 DHCP client bound to address 172.16.3.191 (70 ms) => setenv serverip 172.16.3.3 setenv serverip 172.16.3.3 => tftp 0x82000000 1010665/tftp-deploy-1oul2dwl/kernel/zImage tftp 0x82000000 1010665/tftp-deploy-1oul2dwl/kernel/zImage link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 172.16.3.3; our IP address is 172.16.3.191 Filename '1010665/tftp-deploy-1oul2dwl/kernel/zImage'. Load address: 0x82000000 Loading: *################################################## 4.4 MiB 3.4 MiB/s done Bytes transferred = 4612168 (466048 hex) => tftp 0x83000000 1010665/tftp-deploy-1oul2dwl/ramdisk/ramdisk.cpio.gz.uboot tftp 0x83000000 1010665/tftp-deploy-1oul2dwl/ramdisk/ramdisk.cpio.gz.uboot link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 172.16.3.3; our IP address is 172.16.3.191 Filename '1010665/tftp-deploy-1oul2dwl/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x83000000 Loading: *################################################## 13.5 MiB 3.5 MiB/s done Bytes transferred = 14161250 (d81562 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x88000000 1010665/tftp-deploy-1oul2dwl/dtb/am335x-boneblack.dtb tftp 0x88000000 1010665/tftp-deploy-1oul2dwl/dtb/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 172.16.3.3; our IP address is 172.16.3.191 Filename '1010665/tftp-deploy-1oul2dwl/dtb/am335x-boneblack.dtb'. Load address: 0x88000000 Loading: *################################################## 61.4 KiB 3 MiB/s done Bytes transferred = 62828 (f56c hex) => setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' => bootz 0x82000000 0x83000000 0x88000000 bootz 0x82000000 0x83000000 0x88000000 Kernel image @ 0x82000000 [ 0x000000 - 0x466048 ] ## Loading init Ramdisk from Legacy Image at 83000000 ... Image Name: Created: 2023-09-19 22:34:20 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 14161186 Bytes = 13.5 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Using Device Tree in place at 88000000, end 8801256b Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.194-cip39-rt16 (KernelCI@build-j51469-arm-gcc-10-omap2plus-defconfig-bcdm7) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Tue Sep 19 22:02:14 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black [ 0.000000] earlycon: omap8250 at MMIO 0x44e09000 (options '') [ 0.000000] printk: bootconsole [omap8250] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 16 MiB at 0x9e800000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] On node 0 totalpages: 130560 [ 0.000000] Normal zone: 1148 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 130560 pages, LIFO batch:31 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.1 (sgx neon) [ 0.000000] percpu: Embedded 16 pages/cpu s33484 r8192 d23860 u65536 [ 0.000000] pcpu-alloc: s33484 r8192 d23860 u65536 alloc=16*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129412 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 472040K/522240K available (9216K kernel code, 1044K rwdata, 2180K rodata, 1024K init, 272K bss, 33816K reserved, 16384K cma-reserved, 0K highmem) <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts <6>[ 0.000000] TI gptimer clocksource: always-on /ocp/interconnect@44c00000/segment@200000/target-module@31000 <6>[ 0.000002] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns <6>[ 0.008338] clocksource: dmtimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns <6>[ 0.018545] TI gptimer clockevent: 24000000 Hz at /ocp/interconnect@48000000/segment@0/target-module@40000 <6>[ 0.030213] Console: colour dummy device 80x30 <3>[ 0.035089] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' <3>[ 0.042147] This ensures that you still see kernel messages. Please <3>[ 0.048872] update your kernel commandline. <6>[ 0.053472] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) <6>[ 0.095547] CPU: Testing write buffer coherency: ok <6>[ 0.100924] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.106391] pid_max: default: 32768 minimum: 301 <6>[ 0.111559] LSM: Security Framework initializing <6>[ 0.116657] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.124476] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.134120] CPU0: thread -1, cpu 0, socket -1, mpidr 0 <6>[ 0.140683] Setting up static identity map for 0x80100000 - 0x80100078 <6>[ 0.147893] rcu: Hierarchical SRCU implementation. <6>[ 0.153669] smp: Bringing up secondary CPUs ... <6>[ 0.158606] smp: Brought up 1 node, 1 CPU <6>[ 0.163032] SMP: Total of 1 processors activated (996.14 BogoMIPS). <6>[ 0.169763] CPU: All CPU(s) started in SVC mode. <6>[ 0.175481] devtmpfs: initialized <6>[ 0.191068] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 <6>[ 0.199603] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.210045] futex hash table entries: 256 (order: 2, 16384 bytes, linear) <6>[ 0.218587] pinctrl core: initialized pinctrl subsystem <6>[ 0.226240] NET: Registered protocol family 16 <6>[ 0.233868] DMA: preallocated 256 KiB pool for atomic coherent allocations <3>[ 0.260307] l3-aon-clkctrl:0000:0: failed to disable <6>[ 0.266414] audit: initializing netlink subsys (disabled) <6>[ 0.273492] thermal_sys: Registered thermal governor 'fair_share' <6>[ 0.273506] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.273511] thermal_sys: Registered thermal governor 'user_space' <6>[ 0.273770] cpuidle: using governor menu <5>[ 1.167439] audit: type=2000 audit(0.230:1): state=initialized audit_enabled=0 res=1 <6>[ 1.292827] No ATAGs? <6>[ 1.295458] hw-breakpoint: debug architecture 0x4 unsupported. <6>[ 1.319994] Kprobes globally optimized <7>[ 1.330356] reg-fixed-voltage fixedregulator0: GPIO lookup for consumer (null) <7>[ 1.338090] reg-fixed-voltage fixedregulator0: using device tree for GPIO lookup <7>[ 1.346054] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/fixedregulator0[0]' <7>[ 1.355409] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator0[0]' <7>[ 1.364655] reg-fixed-voltage fixedregulator0: using lookup tables for GPIO lookup <7>[ 1.372727] reg-fixed-voltage fixedregulator0: No GPIO consumer (null) found <6>[ 1.382954] iommu: Default domain type: Translated <6>[ 1.390065] vgaarb: loaded <5>[ 1.393648] SCSI subsystem initialized <7>[ 1.398152] libata version 3.00 loaded. <6>[ 1.403024] pps_core: LinuxPPS API ver. 1 registered <6>[ 1.408406] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 1.418147] PTP clock support registered <6>[ 1.423960] clocksource: Switched to clocksource dmtimer <5>[ 2.094034] VFS: Disk quotas dquot_6.6.0 <6>[ 2.098447] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) <6>[ 2.115610] NET: Registered protocol family 2 <6>[ 2.120671] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 2.129388] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) <6>[ 2.138355] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) <6>[ 2.146656] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) <6>[ 2.154337] TCP: Hash tables configured (established 4096 bind 4096) <6>[ 2.161250] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 2.168281] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 2.175906] NET: Registered protocol family 1 <6>[ 2.181735] RPC: Registered named UNIX socket transport module. <6>[ 2.188204] RPC: Registered udp transport module. <6>[ 2.193314] RPC: Registered tcp transport module. <6>[ 2.198439] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 2.205370] PCI: CLS 0 bytes, default 64 <6>[ 2.210401] Trying to unpack rootfs image as initramfs... <6>[ 3.197180] Freeing initrd memory: 13832K <6>[ 3.202772] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available <5>[ 3.213205] Initialise system trusted keyrings <6>[ 3.218648] workingset: timestamp_bits=14 max_order=17 bucket_order=3 <5>[ 3.226885] NFS: Registering the id_resolver key type <5>[ 3.232429] Key type id_resolver registered <5>[ 3.237072] Key type id_legacy registered <6>[ 3.241520] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. <5>[ 3.249513] Key type asymmetric registered <5>[ 3.254052] Asymmetric key parser 'x509' registered <6>[ 3.259353] io scheduler mq-deadline registered <6>[ 3.264302] io scheduler kyber registered <3>[ 3.402806] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.411520] omap_gpio 44e07000.gpio: Could not register gpio chip -517 <4>[ 3.520630] ti-sysc: probe of 44e31000.target-module failed with error -16 <4>[ 3.562727] ti-sysc: probe of 48040000.target-module failed with error -16 <3>[ 3.634748] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.643385] omap_gpio 4804c000.gpio: Could not register gpio chip -517 <3>[ 3.703429] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.712154] omap_gpio 481ac000.gpio: Could not register gpio chip -517 <3>[ 3.729662] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.738355] omap_gpio 481ae000.gpio: Could not register gpio chip -517 <3>[ 3.802047] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present! <6>[ 3.810623] edma 49000000.dma: TI EDMA DMA engine driver <6>[ 3.837666] pinctrl-single 44e10800.pinmux: 142 pins, size 568 <7>[ 3.846574] gpio-clk clk_mcasp0: GPIO lookup for consumer enable <7>[ 3.853048] gpio-clk clk_mcasp0: using device tree for GPIO lookup <7>[ 3.859786] gpio-clk clk_mcasp0: No GPIO consumer enable found <6>[ 3.871638] Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled <7>[ 3.882457] omap8250 44e09000.serial: GPIO lookup for consumer rs485-term <7>[ 3.889872] omap8250 44e09000.serial: using device tree for GPIO lookup <7>[ 3.896997] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/ocp/interconnect@44c00000/segment@200000/target-module@9000/serial@0[0]' <7>[ 3.912082] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/ocp/interconnect@44c00000/segment@200000/target-module@9000/serial@0[0]' <7>[ 3.927068] omap8250 44e09000.serial: using lookup tables for GPIO lookup <7>[ 3.934341] omap8250 44e09000.serial: No GPIO consumer rs485-term found <6>[ 3.941453] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 20, base_baud = 3000000) is a 8250 <6>[ 3.950874] printk: console [ttyS0] enabled <6>[ 3.950874] printk: console [ttyS0] enabled <6>[ 3.959942] printk: bootconsole [omap8250] disabled <6>[ 3.959942] printk: bootconsole [omap8250] disabled <6>[ 3.984149] brd: module loaded <6>[ 3.994978] loop: module loaded <3>[ 4.000424] mtdoops: mtd device (mtddev=name/number) must be supplied <7>[ 4.009593] mdio_bus fixed-0: GPIO lookup for consumer reset <7>[ 4.015659] mdio_bus fixed-0: using lookup tables for GPIO lookup <7>[ 4.022048] mdio_bus fixed-0: No GPIO consumer reset found <7>[ 4.032287] mdio_bus 4a101000.mdio: GPIO lookup for consumer reset <7>[ 4.038902] mdio_bus 4a101000.mdio: using device tree for GPIO lookup <7>[ 4.045675] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/interconnect@4a000000/segment@0/target-module@100000/ethernet@0/mdio@1000[0]' <7>[ 4.060753] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ocp/interconnect@4a000000/segment@0/target-module@100000/ethernet@0/mdio@1000[0]' <7>[ 4.075733] mdio_bus 4a101000.mdio: using lookup tables for GPIO lookup <7>[ 4.082643] mdio_bus 4a101000.mdio: No GPIO consumer reset found <6>[ 4.143893] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000 <7>[ 4.184901] mdio_bus 4a101000.mdio:00: GPIO lookup for consumer reset <7>[ 4.191680] mdio_bus 4a101000.mdio:00: using device tree for GPIO lookup <7>[ 4.198791] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/interconnect@4a000000/segment@0/target-module@100000/ethernet@0/mdio@1000/ethernet-phy@0[0]' <7>[ 4.215209] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ocp/interconnect@4a000000/segment@0/target-module@100000/ethernet@0/mdio@1000/ethernet-phy@0[0]' <7>[ 4.231503] mdio_bus 4a101000.mdio:00: using lookup tables for GPIO lookup <7>[ 4.238692] mdio_bus 4a101000.mdio:00: No GPIO consumer reset found <6>[ 4.246527] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 <6>[ 4.256427] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4 <6>[ 4.263089] cpsw 4a100000.ethernet: ALE Table size 1024 <6>[ 4.268894] cpsw 4a100000.ethernet: cpts: overflow check period 500 (jiffies) <6>[ 4.276484] cpsw 4a100000.ethernet: Detected MACID = 04:79:b7:e7:06:e0 <6>[ 4.285560] i2c /dev entries driver <5>[ 4.291031] cpuidle: enable-method property 'ti,am3352' found operations <6>[ 4.298975] sdhci: Secure Digital Host Controller Interface driver <6>[ 4.305523] sdhci: Copyright(c) Pierre Ossman <6>[ 4.310860] sdhci-pltfm: SDHCI platform and OF driver helper <7>[ 4.317881] sdhci-omap 48060000.mmc: GPIO lookup for consumer cd <7>[ 4.324291] sdhci-omap 48060000.mmc: using device tree for GPIO lookup <7>[ 4.331140] sdhci-omap 48060000.mmc: No GPIO consumer cd found <7>[ 4.338174] sdhci-omap 481d8000.mmc: GPIO lookup for consumer wp <7>[ 4.344578] sdhci-omap 481d8000.mmc: using device tree for GPIO lookup <7>[ 4.351414] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/interconnect@48000000/segment@100000/target-module@d8000/mmc@0[0]' <7>[ 4.365313] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/interconnect@48000000/segment@100000/target-module@d8000/mmc@0[0]' <7>[ 4.379087] sdhci-omap 481d8000.mmc: using lookup tables for GPIO lookup <7>[ 4.386106] sdhci-omap 481d8000.mmc: No GPIO consumer wp found <4>[ 4.392393] sdhci-omap 481d8000.mmc: supply vqmmc not found, using dummy regulator <6>[ 4.400927] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 4.409287] Initializing XFRM netlink socket <6>[ 4.414118] NET: Registered protocol family 10 <6>[ 4.420332] Segment Routing with IPv6 <6>[ 4.424471] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 4.431436] NET: Registered protocol family 17 <6>[ 4.436279] NET: Registered protocol family 15 <5>[ 4.441117] Key type dns_resolver registered <6>[ 4.446324] oprofile: using arm/armv7 <6>[ 4.450369] ThumbEE CPU extension supported. <5>[ 4.455003] Registering SWP/SWPB emulation handler <3>[ 4.460478] omap_voltage_late_init: Voltage driver support not added <3>[ 4.467192] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize <3>[ 4.475630] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize <6>[ 4.484308] SmartReflex Class3 initialized <6>[ 4.490959] printk: console [ttyS0]: printing thread started <5>[ 4.491043] Loading compiled-in X.509 certificates <6>[ 4.510013] OMAP GPIO hardware version 0.1 <6>[ 4.526557] mmc1: SDHCI controller on 481d8000.mmc [481d8000.mmc] using External DMA <4>[ 4.554387] tps65217-pmic: Failed to locate of_node [id: -1] <4>[ 4.561968] tps65217-bl: Failed to locate of_node [id: -1] <6>[ 4.576666] tps65217 0-0024: TPS65217 ID 0xe version 1.2 <6>[ 4.577422] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz <6>[ 4.581382] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz <6>[ 4.586663] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22) <6>[ 4.586674] sdhci-omap 48060000.mmc: Got CD GPIO <4>[ 4.586934] sdhci-omap 48060000.mmc: supply vqmmc not found, using dummy regulator <6>[ 4.634800] mmc1: new high speed MMC card at address 0001 <6>[ 4.635860] mmcblk1: mmc1:0001 M62704 3.56 GiB <6>[ 4.636300] mmcblk1boot0: mmc1:0001 M62704 partition 1 2.00 MiB <6>[ 4.636708] mmcblk1boot1: mmc1:0001 M62704 partition 2 2.00 MiB <6>[ 4.637048] mmcblk1rpmb: mmc1:0001 M62704 partition 3 512 KiB, chardev (249:0) <6>[ 4.639132] mmcblk1: p1 <6>[ 4.677747] mmc0: SDHCI controller on 48060000.mmc [48060000.mmc] using External DMA <6>[ 4.679261] cpsw 4a100000.ethernet: initializing cpsw version 1.12 (0) <6>[ 4.755249] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL) <6>[ 6.854386] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off <6>[ 6.883698] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 6.913805] Sending DHCP requests ., OK <6>[ 7.033681] IP-Config: Got DHCP answer from 172.16.3.3, my address is 172.16.3.191 <6>[ 7.033704] IP-Config: Complete: <6>[ 7.033708] device=eth0, hwaddr=04:79:b7:e7:06:e0, ipaddr=172.16.3.191, mask=255.255.255.0, gw=172.16.3.3 <6>[ 7.033721] host=172.16.3.191, domain=denx.de, nis-domain=(none) <6>[ 7.033727] bootserver=172.16.3.33, rootserver=172.16.3.33, rootpath= <6>[ 7.033735] nameserver0=172.16.3.3 <6>[ 7.033745] ntpserver0=172.16.3.3 <6>[ 7.036496] Freeing unused kernel memory: 1024K <6>[ 7.104192] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 7.338292] udevd[101]: starting version 3.2.9 <5>[ 7.339767] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 7.340176] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 7.340306] random: udevd: uninitialized urandom read (16 bytes read) <27>[ 7.376456] udevd[101]: specified user 'tss' unknown <27>[ 7.376682] udevd[101]: specified group 'tss' unknown <30>[ 7.386484] udevd[102]: starting eudev-3.2.9 <4>[ 8.242627] am335x-phy-driver 47401300.usb-phy: supply vcc not found, using dummy regulator <4>[ 8.242958] am335x-phy-driver 47401300.usb-phy: dummy supplies not allowed for exclusive requests <6>[ 8.272864] usbcore: registered new interface driver usbfs <6>[ 8.272939] usbcore: registered new interface driver hub <6>[ 8.273025] usbcore: registered new device driver usb <6>[ 8.288529] remoteproc remoteproc0: wkup_m3 is available <4>[ 8.567616] am335x-phy-driver 47401b00.usb-phy: supply vcc not found, using dummy regulator <4>[ 8.567956] am335x-phy-driver 47401b00.usb-phy: dummy supplies not allowed for exclusive requests <6>[ 8.698202] musb-hdrc musb-hdrc.1: MUSB HDRC host driver <6>[ 8.698256] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 8.774216] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 <6>[ 8.774248] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 8.774259] usb usb1: Product: MUSB HDRC host driver <6>[ 8.774266] usb usb1: Manufacturer: Linux 5.10.194-cip39-rt16 musb-hcd <6>[ 8.774273] usb usb1: SerialNumber: musb-hdrc.1 <6>[ 8.775261] hub 1-0:1.0: USB hub found <6>[ 8.775334] hub 1-0:1.0: 1 port detected <4>[ 9.092325] at24 0-0050: supply vcc not found, using dummy regulator <6>[ 9.184522] omap_rtc 44e3e000.rtc: registered as rtc0 <6>[ 9.184598] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01T00:00:00 UTC (946684800) <6>[ 9.186577] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write <4>[ 9.186980] at24 2-0054: supply vcc not found, using dummy regulator <6>[ 9.191217] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec <4>[ 9.266574] at24 2-0055: supply vcc not found, using dummy regulator <4>[ 9.306372] at24 2-0056: supply vcc not found, using dummy regulator <4>[ 9.336381] at24 2-0057: supply vcc not found, using dummy regulator <4>[ 9.595238] tps6521x_pwrbutton tps65217-pwrbutton: DMA mask not set <6>[ 9.624558] input: tps65217_pwrbutton as /devices/platform/ocp/44c00000.interconnect/44c00000.interconnect:segment@200000/44e0b000.target-module/44e0b000.i2c/i2c-0/0-0024/tps65217-pwrbutton/input/input0 <3>[ 9.667630] wkup_m3_ipc 44e11324.wkup_m3_ipc: IPC Request for A8->M3 Channel failed! -517 <6>[ 9.836948] tda998x 0-0070: found TDA19988 <3>[ 9.914607] davinci-mcasp 48038000.mcasp: IRQ common not found <3>[ 10.015769] wkup_m3_ipc 44e11324.wkup_m3_ipc: IPC Request for A8->M3 Channel failed! -517 <6>[ 10.441327] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 <6>[ 10.459642] remoteproc remoteproc0: powering up wkup_m3 <4>[ 10.459791] remoteproc remoteproc0: Direct firmware load for am335x-pm-firmware.elf failed with error -2 <3>[ 10.459811] remoteproc remoteproc0: request_firmware failed: -2 <3>[ 10.459819] wkup_m3_ipc 44e11324.wkup_m3_ipc: rproc_boot failed <6>[ 10.893077] tilcdc 4830e000.lcdc: bound 0-0070 (ops tda998x_driver_exit [tda998x]) <6>[ 10.897871] [drm] Initialized tilcdc 1.0.0 20121205 for 4830e000.lcdc on minor 0 <6>[ 10.898277] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes <6>[ 10.908868] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes <6>[ 10.941286] omap_rng 48310000.rng: Random Number Generator ver. 20 <5>[ 10.941936] random: crng init done <3>[ 11.363602] PM: Cannot get wkup_m3_ipc handle <6>[ 11.513187] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 <6>[ 11.555762] omap-sham 53100000.sham: will run requests pump with realtime priority <6>[ 11.583431] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 <6>[ 11.623894] omap-aes 53500000.aes: will run requests pump with realtime priority <3>[ 11.679440] PM: Cannot get wkup_m3_ipc handle <3>[ 12.220292] PM: Cannot get wkup_m3_ipc handle <3>[ 12.238206] PM: Cannot get wkup_m3_ipc handle done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-1010665/environment . /lava-1010665/environment / # /lava-1010665/bin/lava-test-runner /lava-1010665/0 /lava-1010665/bin/lava-test-runner /lava-1010665/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-1010665/0/tests/0_dmesg + cat uuid + UUID=1010665_1.5.2.4.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 13.180493] <8>[ 13.248188] <8>[ 13.308359] + set +x <8>[ 13.368564] / # <8>[ 13.370647] #export SHELL=/bin/sh / # export SHELL=/bin/sh. /lava-1010665/environment / # . /lava-1010665/environment/lava-1010665/bin/lava-test-runner /lava-1010665/1 / # /lava-1010665/bin/lava-test-runner /lava-1010665/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-1010665/1/tests/1_bootrr + cat uuid + UUID=1010665_1.5.2.4.5 + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lav<8>[ 13.911154] a-1010665/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto pm33xx /lava-1010665/1/../bin/lava-test-case <8>[ 15.020992] /lava-1010665/1/../bin/lava-test-case <8>[ 15.076056] /lava-1010665/1/../bin/lava-test-case <8>[ 15.108700] /lava-1010665/1/../bin/lava-test-case <8>[ 15.170259] /lava-1010665/1/../bin/lava-test-case <8>[ 15.221235] /lava-1010665/1/../bin/lava-test-case <8>[ 15.262003] /lava-1010665/1/../bin/lava-test-case <8>[ 15.312101] /lava-1010665/1/../bin/lava-test-case <8>[ 15.378844] /lava-1010665/1/../bin/lava-test-case <8>[ 15.419294] /lava-1010665/1/../bin/lava-test-case <8>[ 15.469466] /lava-1010665/1/../bin/lava-test-case <8>[ 15.509992] /lava-1010665/1/../bin/lava-test-case <8>[ 15.560309] /lava-1010665/1/../bin/lava-test-case <8>[ 15.600653] /lava-1010665/1/../bin/lava-test-case <8>[ 15.640952] /lava-1010665/1/../bin/lava-test-case <8>[ 15.681959] /lava-1010665/1/../bin/lava-test-case <8>[ 15.731870] /lava-1010665/1/../bin/lava-test-case <8>[ 15.774195] /lava-1010665/1/../bin/lava-test-case <8>[ 15.824611] /lava-1010665/1/../bin/lava-test-case <8>[ 15.874420] /lava-1010665/1/../bin/lava-test-case <8>[ 15.915197] /lava-1010665/1/../bin/lava-test-case <8>[ 15.966050] /lava-1010665/1/../bin/lava-test-case <8>[ 16.016333] /lava-1010665/1/../bin/lava-test-case <8>[ 16.057528] /lava-1010665/1/../bin/lava-test-case <8>[ 16.108232] /lava-1010665/1/../bin/lava-test-case <8>[ 16.149252] /lava-1010665/1/../bin/lava-test-case <8>[ 16.199411] /lava-1010665/1/../bin/lava-test-case <8>[ 16.240103] /lava-1010665/1/../bin/lava-test-case <8>[ 17.321258] /lava-1010665/1/../bin/lava-test-case <8>[ 17.362361] /lava-1010665/1/../bin/lava-test-case <8>[ 17.413197] /lava-1010665/1/../bin/lava-test-case <8>[ 17.454745] /lava-1010665/1/../bin/lava-test-case <8>[ 17.504921] /lava-1010665/1/../bin/lava-test-case <8>[ 17.546065] /lava-1010665/1/../bin/lava-test-case <8>[ 17.596956] /lava-1010665/1/../bin/lava-test-case <8>[ 17.637482] /lava-1010665/1/../bin/lava-test-case <8>[ 17.688160] /lava-1010665/1/../bin/lava-test-case <8>[ 17.728875] /lava-1010665/1/../bin/lava-test-case <8>[ 17.779544] /lava-1010665/1/../bin/lava-test-case <8>[ 17.820212] /lava-1010665/1/../bin/lava-test-case <8>[ 17.870327] /lava-1010665/1/../bin/lava-test-case <8>[ 17.910660] /lava-1010665/1/../bin/lava-test-case <8>[ 17.961336] /lava-1010665/1/../bin/lava-test-case <8>[ 18.002160] /lava-1010665/1/../bin/lava-test-case <8>[ 18.052411] /lava-1010665/1/../bin/lava-test-case <8>[ 18.092494] /lava-1010665/1/../bin/lava-test-case <8>[ 18.142980] /lava-1010665/1/../bin/lava-test-case <8>[ 18.184215] /lava-1010665/1/../bin/lava-test-case <8>[ 18.234561] /lava-1010665/1/../bin/lava-test-case /opt/bootrr/libexec/bootrr/boards/ti,am335x-bone-black: line 84: assert_device-present: not found <8>[ 18.274796] /lava-1010665/1/../bin/lava-test-case <8>[ 18.318851] /lava-1010665/1/../bin/lava-test-case <8>[ 18.369555] /lava-1010665/1/../bin/lava-test-case <8>[ 18.417609] + set +x