connecting to NetworkSerialPort(target=Target(name='imx6dl-riotboard-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4011, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4011 connected to 10.8.254.5 (port 4011) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2023.01.0 #1 Fri Jan 27 16:21:21 CET 2023 Board: RIoTboard i.MX6S detected i.MX6 Solo revision 1.1 i.MX6 Solo unique ID: 132c61d4d72d78a9 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2194000.mmc@2194000.of: registered as mmc1 imx-esdhc 2198000.mmc@2198000.of: registered as mmc2 imx-esdhc 219c000.mmc@219c000.of: registered as mmc3 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-hdmi 120000.hdmi@120000.of: Detected HDMI controller 0x13:0x1a:0xa0:0xc1 netconsole: registered as netconsole-1 malloc space: 0x2fe7b320 -> 0x4fcf663f (size 510.5 MiB) mmc3: detected MMC card version 4.41 mmc3: registered mmc3.boot0 mmc3: registered mmc3.boot1 mmc3: registered mmc3 [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mRIoTboard i.MX6S:/[0m bootm -v -r /mnt/tftp/1048701/tftp-deploy-4qbxafzn/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/1048701/tftp-deploy-4qbxafzn/dtb/imx6dl-riotboard.dtb /mnt/tftp/1048701/tftp-deploy-4qbxafzn/kernel/zImage [1;32mbarebox@[1;36mRIoTboard i.MX6S:/[0m bootm -v -r /mnt/tftp/1048701/tftp-deploy-4qbxafzn/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/1048701/tftp-deploy-4qbxafzn/dtb/imx6dl-riotboard.dtb /mnt/tftp/1048701/tftp-deploy-4qbxafzn/kernel/zImage [1;33mWARNING:[0m eth0: No MAC address set. Using random address e6:1a:d1:2c:67:74 eth0: 1000Mbps full duplex link detected T eth0: DHCP client bound to address 10.8.254.200 Loading ARM Linux zImage '/mnt/tftp/1048701/tftp-deploy-4qbxafzn/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x12e64000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/1048701/tftp-deploy-4qbxafzn/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x18f587b0 Loading devicetree from '/mnt/tftp/1048701/tftp-deploy-4qbxafzn/dtb/imx6dl-riotboard.dtb' commandline: console=ttymxc1,115200n8 loglevel=13 Starting kernel at 0x12e64000, initrd at 0x18000000, oftree at 0x18f59000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.218-cip49-rt20 (KernelCI@build-j220222-arm-gcc-10-multi-v7-defconfig-gqqfq) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Thu Jun 6 12:53:10 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: RIoTboard i.MX6S [ 0.000000] Memory policy: Data cache writeback [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x4b800000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000010000000-0x000000003fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000040000000-0x000000004fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000010000000-0x000000004fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000004fffffff] [ 0.000000] On node 0 totalpages: 262144 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:63 [ 0.000000] HighMem zone: 65536 pages, LIFO batch:15 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] percpu: Embedded 16 pages/cpu s33676 r8192 d23668 u65536 [ 0.000000] pcpu-alloc: s33676 r8192 d23668 u65536 alloc=16*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260608 [ 0.000000] Kernel command line: console=ttymxc1,115200n8 loglevel=13 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 931672K/1048576K available (14336K kernel code, 2332K rwdata, 5368K rodata, 2048K init, 417K bss, 51368K reserved, 65536K cma-reserved, 195512K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=1. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 512 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76450001 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000000] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000019] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.003562] Console: colour dummy device 80x30 [ 0.003613] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.003627] CPU: Testing write buffer coherency: ok [ 0.003666] CPU0: Spectre v2: using BPIALL workaround [ 0.003674] pid_max: default: 32768 minimum: 301 [ 0.003823] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.003844] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.004733] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.005464] Setting up static identity map for 0x10300000 - 0x103000ac [ 0.006988] rcu: Hierarchical SRCU implementation. [ 0.010201] EFI services will not be available. [ 0.010367] smp: Bringing up secondary CPUs ... [ 0.010372] smp: Brought up 1 node, 1 CPU [ 0.010380] SMP: Total of 1 processors activated (6.00 BogoMIPS). [ 0.010389] CPU: All CPU(s) started in SVC mode. [ 0.010830] devtmpfs: initialized [ 0.017350] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.017585] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.017608] futex hash table entries: 256 (order: 2, 16384 bytes, linear) [ 0.019905] pinctrl core: initialized pinctrl subsystem [ 0.021697] DMI not present or invalid. [ 0.022478] NET: Registered protocol family 16 [ 0.025344] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.027432] thermal_sys: Registered thermal governor 'step_wise' [ 0.027559] cpuidle: using governor menu [ 0.027703] CPU identified as i.MX6DL, silicon rev 1.1 [ 0.182141] vdd1p1: supplied by regulator-dummy [ 0.188984] vdd3p0: supplied by regulator-dummy [ 0.195842] vdd2p5: supplied by regulator-dummy [ 0.202643] vddarm: supplied by regulator-dummy [ 0.209636] vddpu: supplied by regulator-dummy [ 0.216241] vddsoc: supplied by regulator-dummy [ 0.486654] No ATAGs? [ 0.486711] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.486722] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.490446] imx6dl-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver [ 0.495824] Serial: AMBA PL011 UART driver [ 0.527603] iommu: Default domain type: Translated [ 0.528075] vgaarb: loaded [ 0.528933] SCSI subsystem initialized [ 0.529209] libata version 3.00 loaded. [ 0.529483] usbcore: registered new interface driver usbfs [ 0.529533] usbcore: registered new interface driver hub [ 0.529574] usbcore: registered new device driver usb [ 0.531581] i2c i2c-0: IMX I2C adapter registered [ 0.532361] i2c i2c-1: IMX I2C adapter registered [ 0.532942] i2c i2c-3: IMX I2C adapter registered [ 0.534190] pps_core: LinuxPPS API ver. 1 registered [ 0.534197] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.534220] PTP clock support registered [ 0.538088] clocksource: Switched to clocksource mxc_timer1 [ 1.684422] NET: Registered protocol family 2 [ 1.684771] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.685836] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 1.685877] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.685957] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.686089] TCP: Hash tables configured (established 8192 bind 8192) [ 1.686254] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.686294] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.686471] NET: Registered protocol family 1 [ 1.687235] RPC: Registered named UNIX socket transport module. [ 1.687244] RPC: Registered udp transport module. [ 1.687249] RPC: Registered tcp transport module. [ 1.687252] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.687262] PCI: CLS 0 bytes, default 64 [ 1.687716] Trying to unpack rootfs image as initramfs... [ 3.051044] Freeing initrd memory: 15716K [ 3.051811] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 3.053426] Initialise system trusted keyrings [ 3.053749] workingset: timestamp_bits=30 max_order=18 bucket_order=0 [ 3.059625] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 3.060530] NFS: Registering the id_resolver key type [ 3.060571] Key type id_resolver registered [ 3.060576] Key type id_legacy registered [ 3.060680] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 3.060688] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 3.060724] ntfs: driver 2.1.32 [Flags: R/O]. [ 3.061190] Key type asymmetric registered [ 3.061199] Asymmetric key parser 'x509' registered [ 3.061251] bounce: pool size: 64 pages [ 3.061291] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 3.061299] io scheduler mq-deadline registered [ 3.061305] io scheduler kyber registered [ 3.097009] mxs-dma 110000.dma-controller: initialized [ 3.102066] imx-sdma 20ec000.dma-controller: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 3.102086] imx-sdma 20ec000.dma-controller: external firmware not found, using ROM firmware [ 3.160948] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled [ 3.165356] SuperH (H)SCI(F) driver initialized [ 3.166204] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 32, base_baud = 5000000) is a IMX [ 3.167370] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 75, base_baud = 5000000) is a IMX [ 3.167412] printk: console [ttymxc1] enabled [ 3.168424] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 76, base_baud = 5000000) is a IMX [ 3.169403] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 77, base_baud = 5000000) is a IMX [ 3.170320] 21f4000.serial: ttymxc4 at MMIO 0x21f4000 (irq = 78, base_baud = 5000000) is a IMX [ 3.171791] msm_serial: driver initialized [ 3.172053] STMicroelectronics ASC driver initialized [ 3.173838] STM32 USART driver initialized [ 3.192011] brd: module loaded [ 3.198307] loop: module loaded [ 3.213527] CAN device driver interface [ 3.214759] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 3.216774] pps pps0: new PPS source ptp0 [ 3.263632] fec 2188000.ethernet eth0: registered PHC device 0 [ 3.265124] e1000e: Intel(R) PRO/1000 Network Driver [ 3.265131] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.265194] igb: Intel(R) Gigabit Ethernet Network Driver [ 3.265200] igb: Copyright (c) 2007-2014 Intel Corporation. [ 3.271064] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 3.271125] usbcore: registered new interface driver pegasus [ 3.271170] usbcore: registered new interface driver asix [ 3.271205] usbcore: registered new interface driver ax88179_178a [ 3.271238] usbcore: registered new interface driver cdc_ether [ 3.271282] usbcore: registered new interface driver smsc75xx [ 3.271326] usbcore: registered new interface driver smsc95xx [ 3.271365] usbcore: registered new interface driver net1080 [ 3.271402] usbcore: registered new interface driver cdc_subset [ 3.271435] usbcore: registered new interface driver zaurus [ 3.271500] usbcore: registered new interface driver cdc_ncm [ 3.274818] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.274826] ehci-pci: EHCI PCI platform driver [ 3.274864] ehci-platform: EHCI generic platform driver [ 3.275132] ehci-orion: EHCI orion driver [ 3.275337] SPEAr-ehci: EHCI SPEAr driver [ 3.275517] ehci-st: EHCI STMicroelectronics driver [ 3.275692] ehci-exynos: EHCI Exynos driver [ 3.275867] ehci-atmel: EHCI Atmel driver [ 3.276037] tegra-ehci: Tegra EHCI driver [ 3.276233] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.276258] ohci-pci: OHCI PCI platform driver [ 3.276304] ohci-platform: OHCI generic platform driver [ 3.276560] SPEAr-ohci: OHCI SPEAr driver [ 3.276746] ohci-st: OHCI STMicroelectronics driver [ 3.276933] ohci-atmel: OHCI Atmel driver [ 3.278188] usbcore: registered new interface driver usb-storage [ 3.286228] i2c /dev entries driver [ 3.305860] sdhci: Secure Digital Host Controller Interface driver [ 3.305869] sdhci: Copyright(c) Pierre Ossman [ 3.308572] Synopsys Designware Multimedia Card Interface Driver [ 3.310451] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.316229] sdhci-esdhc-imx 2194000.mmc: Got CD GPIO [ 3.316261] sdhci-esdhc-imx 2194000.mmc: Got WP GPIO [ 3.317641] sdhci-esdhc-imx 2198000.mmc: Got CD GPIO [ 3.317678] sdhci-esdhc-imx 2198000.mmc: Got WP GPIO [ 3.320677] ledtrig-cpu: registered to indicate activity on CPUs [ 3.321857] usbcore: registered new interface driver usbhid [ 3.321866] usbhid: USB HID core driver [ 3.328556] NET: Registered protocol family 10 [ 3.329604] Segment Routing with IPv6 [ 3.329689] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.330280] NET: Registered protocol family 17 [ 3.330299] can: controller area network core [ 3.330372] NET: Registered protocol family 29 [ 3.330380] can: raw protocol [ 3.330389] can: broadcast manager protocol [ 3.330399] can: netlink gateway - max_hops=1 [ 3.330878] Key type dns_resolver registered [ 3.332621] ThumbEE CPU extension supported. [ 3.332639] Registering SWP/SWPB emulation handler [ 3.333083] printk: console [ttymxc1]: printing thread started [ 3.333113] Loading compiled-in X.509 certificates [ 4.515073] mmc3: SDHCI controller on 219c000.mmc [219c000.mmc] using ADMA [ 4.516666] mmc1: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA [ 4.517885] mmc2: SDHCI controller on 2198000.mmc [2198000.mmc] using ADMA [ 4.550440] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 4.550482] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 4.578100] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 4.578885] hub 1-0:1.0: USB hub found [ 4.578931] hub 1-0:1.0: 1 port detected [ 4.581571] imx_thermal 20c8000.anatop:tempmon: Commercial CPU temperature grade - max:95C critical:90C passive:85C [ 4.583374] clk: Disabling unused clocks [ 4.588387] Freeing unused kernel memory: 2048K [ 4.628365] Run /init as init process [ 4.628375] with arguments: [ 4.628377] /init [ 4.628380] with environment: [ 4.628382] HOME=/ [ 4.628385] TERM=linux [ 4.676196] mmc3: new DDR MMC card at address 0001 [ 4.680580] mmcblk3: mmc3:0001 MMC04G 3.58 GiB [ 4.681046] mmcblk3boot0: mmc3:0001 MMC04G partition 1 2.00 MiB [ 4.681545] mmcblk3boot1: mmc3:0001 MMC04G partition 2 2.00 MiB [ 4.681813] mmcblk3rpmb: mmc3:0001 MMC04G partition 3 128 KiB, chardev (235:0) Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: [ 4.820950] udevd[98]: starting version 3.2.9 [ 4.821888] random: udevd: uninitialized urandom read (16 bytes read) [ 4.822115] random: udevd: uninitialized urandom read (16 bytes read) [ 4.822215] random: udevd: uninitialized urandom read (16 bytes read) [ 4.853897] udevd[98]: specified user 'tss' unknown [ 4.854031] udevd[98]: specified group 'tss' unknown [ 4.859860] udevd[99]: starting eudev-3.2.9 [ 4.878191] usb 1-1: new high-speed USB device number 2 using ci_hdrc [ 5.099515] hub 1-1:1.0: USB hub found [ 5.099596] hub 1-1:1.0: 4 ports detected [ 5.800067] imx-ipuv3 2400000.ipu: IPUv3H probed [ 6.078216] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops [etnaviv]) [ 6.078630] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops [etnaviv]) [ 6.078719] etnaviv-gpu 130000.gpu: model: GC880, revision: 5106 [ 6.078924] etnaviv-gpu 134000.gpu: model: GC320, revision: 5007 [ 6.079371] [drm] Initialized etnaviv 1.4.0 20151214 for etnaviv on minor 0 [ 6.155781] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops imx_drm_exit [imxdrm]) [ 6.155898] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops imx_drm_exit [imxdrm]) [ 6.156073] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.31a with HDCP (DWC HDMI 3D TX PHY) [ 6.169201] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops [dw_hdmi_imx]) [ 6.169642] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1 [ 6.169716] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 6.170199] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 6.959824] caam 2100000.crypto: Entropy delay = 3200 [ 7.020620] caam 2100000.crypto: Instantiated RNG4 SH0 [ 7.081382] caam 2100000.crypto: Instantiated RNG4 SH1 [ 7.081396] caam 2100000.crypto: device ID = 0x0a16010000000100 (Era 4) [ 7.081405] caam 2100000.crypto: job rings = 2, qi = 0 [ 7.778009] sgtl5000 0-000a: Error reading chip id -6 [ 7.798297] usb_phy_generic usbphynop1: supply vcc not found, using dummy regulator [ 7.798590] usb_phy_generic usbphynop2: supply vcc not found, using dummy regulator [ 8.561950] caam algorithms registered in /proc/crypto [ 8.563230] caam 2100000.crypto: registering rng-caam done Saving random seed: OK [ 8.631155] random: dd: uninitialized urandom read (32 bytes read) Starting network: OK Starting dropbear sshd: [ 8.716770] random: dropbear: uninitialized urandom read (32 bytes read) OK /bin/sh: can't access tty; job control turned off / # [ 8.745651] random: crng init done / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-1048701/environment . /lava-1048701/environment / # /lava-1048701/bin/lava-test-runner /lava-1048701/0 /lava-1048701/bin/lava-test-runner /lava-1048701/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-1048701/0/tests/0_dmesg + cat uuid + UUID=1048701_1.5.2.3[ 9.295517] .1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 9.336669] [ 9.375463] + set +x