[Enter `^Ec?' for help] PM_RSTS: 0x00001000 RPi: BOOTLOADER release VERSION:c258ef8f DATE: Jul 6 2021 TIME: 11:44:56 BOOTMODE: 0x00000006 part: 0 BUILD_TIMESTAMP=1625568293 0xe825732e 0x00d03114 0x000d9fb3 PM_RSTS: 0x00001000 part 00000000 reset_info 00000000 uSD voltage 3.3V Initialising SDRAM 'Micron' 32Gb x2 total-size: 64 Gbit 3200 XHCI-STOP xHC ver: 256 HCS: 05000420 fc000031 00e70004 HCC: 002841eb USBSTS 11 xHC ver: 256 HCS: 05000420 fc000031 00e70004 HCC: 002841eb xHC ports 5 slots 32 intrs 4 Boot mode: NETWORK (02) order f GENET: RESET_PHY NET_BOOT: e4:5f:01:0f:cf:a5 wait for link TFTP: 0.0.0.0 LINK STATUS: speed: 1000 full duplex Link ready GENET START: 64 16 32 GENET: UMAC_START 0xe45f010f 0xcfa50000 RX: 0 IP: 0 IPV4: 0 MAC: 0 UDP: 0 UDP RECV: 0 IP_CSUM_ERR: 0 UDP_CSUM_ERR: 0 DHCP src: a0:36:bc:c7:c9:42 192.168.201.1 YI_ADDR 192.168.201.21 SI_ADDR 192.168.201.1 OPTIONS:- op: 53 len: 1 DHCP recv OFFER (2) expect OFFER op: 54 len: 4 192.168.201.1 op: 51 len: 4 op: 67 len: 6 op: 58 len: 4 op: 59 len: 4 op: 1 len: 4 255.255.255.0 op: 28 len: 4 192.168.201.255 op: 3 len: 4 192.168.201.1 op: 60 len: 9 op: 97 len: 17 op: 43 len: 32 PXE op: 6 len: 1 PXE op: 10 len: 4 PXE op: 9 len: 20 00000000 52 61 73 70 62 65 72 72 79 20 50 69 20 42 6f 6f |Raspberry Pi Boo| 00000010 74 ff ff 00 |t... | DHCP src: a0:36:bc:c7:c9:42 192.168.201.1 YI_ADDR 192.168.201.21 SI_ADDR 192.168.201.1 OPTIONS:- op: 53 len: 1 DHCP recv ACK (5) expect ACK op: 54 len: 4 192.168.201.1 op: 51 len: 4 op: 58 len: 4 op: 59 len: 4 op: 1 len: 4 255.255.255.0 op: 28 len: 4 192.168.201.255 op: 3 len: 4 192.168.201.1 op: 6 len: 4 op: 15 len: 9 op: 12 len: 21 NET 192.168.201.21 255.255.255.0 gw 0.0.0.0 tftp 192.168.201.1 ARP 192.168.201.1 a0:36:bc:c7:c9:42 NET 192.168.201.21 255.255.255.0 gw 0.0.0.0 tftp 192.168.201.1 RX: 4 IP: 0 IPV4: 4 MAC: 2 UDP: 2 UDP RECV: 2 IP_CSUM_ERR: 0 UDP_CSUM_ERR: 0 TFTP_GET: a0:36:bc:c7:c9:42 192.168.201.1 tftp-static/bcm2711-rpi-4-b/start4.elf RX: 4 IP: 0 IPV4: 4 MAC: 2 UDP: 2 UDP RECV: 2 IP_CSUM_ERR: 0 UDP_CSUM_ERR: 0 RX: 5 IP: 0 IPV4: 6 MAC: 3 UDP: 3 UDP RECV: 3 IP_CSUM_ERR: 0 UDP_CSUM_ERR: 0 TFTP_GET: a0:36:bc:c7:c9:42 192.168.201.1 tftp-static/bcm2711-rpi-4-b/config.txt RX: 5 IP: 0 IPV4: 6 MAC: 3 UDP: 3 UDP RECV: 3 IP_CSUM_ERR: 0 UDP_CSUM_ERR: 0 TFTP: complete 340 RX: 7 IP: 0 IPV4: 10 MAC: 5 UDP: 5 UDP RECV: 5 IP_CSUM_ERR: 0 UDP_CSUM_ERR: 0 Read tftp-static/bcm2711-rpi-4-b/config.txt bytes 340 hnd 0x00000000 TFTP_GET: a0:36:bc:c7:c9:42 192.168.201.1 tftp-static/bcm2711-rpi-4-b/pieeprom.sig RX: 7 IP: 0 IPV4: 10 MAC: 5 UDP: 5 UDP RECV: 5 IP_CSUM_ERR: 0 UDP_CSUM_ERR: 0 TFTP 1: File not found RX: 8 IP: 0 IPV4: 12 MAC: 6 UDP: 6 UDP RECV: 6 IP_CSUM_ERR: 0 UDP_CSUM_ERR: 0 Read tftp-static/bcm2711-rpi-4-b/pieeprom.upd failed TFTP_GET: a0:36:bc:c7:c9:42 192.168.201.1 tftp-static/bcm2711-rpi-4-b/recover4.elf RX: 8 IP: 0 IPV4: 12 MAC: 6 UDP: 6 UDP RECV: 6 IP_CSUM_ERR: 0 UDP_CSUM_ERR: 0 TFTP 1: File not found RX: 9 IP: 0 IPV4: 14 MAC: 7 UDP: 7 UDP RECV: 7 IP_CSUM_ERR: 0 UDP_CSUM_ERR: 0 Read tftp-static/bcm2711-rpi-4-b/recover4.elf failed TFTP_GET: a0:36:bc:c7:c9:42 192.168.201.1 tftp-static/bcm2711-rpi-4-b/recovery.elf RX: 9 IP: 0 IPV4: 14 MAC: 7 UDP: 7 UDP RECV: 7 IP_CSUM_ERR: 0 UDP_CSUM_ERR: 0 TFTP 1: File not found RX: 10 IP: 0 IPV4: 16 MAC: 8 UDP: 8 UDP RECV: 8 IP_CSUM_ERR: 0 UDP_CSUM_ERR: 0 Read tftp-static/bcm2711-rpi-4-b/recovery.elf failed TFTP_GET: a0:36:bc:c7:c9:42 192.168.201.1 tftp-static/bcm2711-rpi-4-b/start4.elf RX: 10 IP: 0 IPV4: 16 MAC: 8 UDP: 8 UDP RECV: 8 IP_CSUM_ERR: 0 UDP_CSUM_ERR: 0 TFTP: complete 2228800 RX: 2188 IP: 0 IPV4: 4372 MAC: 2186 UDP: 2186 UDP RECV: 2186 IP_CSUM_ERR: 0 UDP_CSUM_ERR: 0 Read tftp-static/bcm2711-rpi-4-b/start4.elf bytes 2228800 hnd 0x00000000 TFTP_GET: a0:36:bc:c7:c9:42 192.168.201.1 tftp-static/bcm2711-rpi-4-b/fixup4.dat RX: 2188 IP: 0 IPV4: 4372 MAC: 2186 UDP: 2186 UDP RECV: 2186 IP_CSUM_ERR: 0 UDP_CSUM_ERR: 0 TFTP: complete 5448 RX: 2195 IP: 0 IPV4: 4386 MAC: 2193 UDP: 2193 UDP RECV: 2193 IP_CSUM_ERR: 0 UDP_CSUM_ERR: 0 Read tftp-static/bcm2711-rpi-4-b/fixup4.dat bytes 5448 hnd 0x00000000 Firmware: 564e5f9b852b23a330b1764bcf0b2d022a20afd0 Feb 25 2021 12:10:40 0x00d03114 0x00000000 0x000000ff MEM GPU: 76 ARM: 948 TOTAL: 1024 Starting start4.elf @ 0xfec00200 partition -1 Stopping network RX: 2195 IP: 0 IPV4: 4386 MAC: 2193 UDP: 2193 UDP RECV: 2193 IP_CSUM_ERR: 0 UDP_CSUM_ERR: 0 RX: 2195 IP: 0 IPV4: 4386 MAC: 2193 UDP: 2193 UDP RECV: 2193 IP_CSUM_ERR: 0 UDP_CSUM_ERR: 0 RX_DISCARD: 0 GR64: 0x00000001 GR64: 0x00000007 GR127: 0x00000001 GR255: 0x00000004 GR511: 0x00000001 GR1023: 0x00000885 GR1518: 0x00000000 GRMGV: 0x00000000 GR2047: 0x00000000 GR4095: 0x00000000 GR9216: 0x00000893 GRPKT: 0x0023c96a GRBYT: 0x00000001 GRMCA: 0x00000000 GRBCA: 0x00000000 GRFCS: 0x00000000 GRXCF: 0x00000000 GRXPF: 0x00000000 GRXUO: 0x00000000 GRALN: 0x00000000 GRFLR: 0x00000000 GRCDE: 0x00000000 GRFCR: 0x00000000 GROVR: 0x00000000 GRJBR: 0x00000000 GRMTUE: 0x00000893 GRPOK: 0x00000892 GRUC: 0x00000000 GRPPP: 0x00000000 GRCRC: 0x00000000 TR64: 0x0000088c TR127: 0x00000008 TR255: 0x00000000 TR511: 0x00000003 TR1023: 0x00000000 TR1518: 0x00000000 TRMGV: 0x00000000 TR2047: 0x00000000 TR4095: 0x00000000 TR9216: 0x00000000 GTPKT: 0x00000897 GTMCA: 0x00000000 GTBCA: 0x00000004 GTXPF: 0x00000000 GTXCF: 0x00000000 GTFCS: 0x00000000 GTOVR: 0x00000000 GTDRF: 0x00000000 GTEDF: 0x00000000 GTSCL: 0x00000000 GTMCL: 0x00000000 GTLCL: 0x00000000 GTXCL: 0x00000000 GTFRG: 0x00000000 GTNCL: 0x00000000 GTJBR: 0x00000000 GTBYT: 0x00022aa9 GTPOK: 0x00000897 GTUC: 0x00000893 GENET STOP: 0 U-Boot 2021.10+dfsg-1+apertis10bv2022.1b3 (Apr 18 2022 - 16:34:49 +0000) DRAM: 7.9 GiB RPI 4 Model B (0xd03114) MMC: mmc@7e300000: 1, mmc@7e340000: 0 Loading Environment from FAT... Unable to read "uboot.env" from mmc0:1... In: serial Out: serial Err: serial Net: eth0: ethernet@7d580000 PCIe BRCM: link up, 5.0 Gbps x1 (SSC) starting USB... Bus usb@7e980000: USB DWC2 Bus xhci_pci: Register 5000420 NbrPorts 5 Starting the controller USB XHCI 1.00 scanning bus usb@7e980000 for devices... 1 USB Device(s) found scanning bus xhci_pci for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found File System is consistent file found, deleting File System is consistent Warning: Bootlimit (3) exceeded. Using altbootcmd. Hit any key to stop autoboot: 2  0 U-Boot> setenv autoload no setenv autoload no U-Boot> setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff U-Boot> setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff U-Boot> dhcp dhcp BOOTP broadcast 1 DHCP client bound to address 192.168.201.21 (7 ms) U-Boot> setenv serverip 192.168.201.1 setenv serverip 192.168.201.1 U-Boot> tftp 0x00080000 14202673/tftp-deploy-x0jw1gnu/kernel/Image tftp 0x00080000 14202673/tftp-deploy-x0jw1gnu/kernel/Image Using ethernet@7d580000 device TFTP from server 192.168.201.1; our IP address is 192.168.201.21 Filename '14202673/tftp-deploy-x0jw1gnu/kernel/Image'. Load address: 0x80000 Loading: *###########################T ####################### 30.6 MiB 4.7 MiB/s done Bytes transferred = 32055808 (1e92200 hex) U-Boot> tftp 0x06700000 14202673/tftp-deploy-x0jw1gnu/ramdisk/ramdisk.cpio.gz.uboot tftp 0x06700000 14202673/tftp-deploy-x0jw1gnu/ramdisk/ramdisk.cpio.gz.uboot Using ethernet@7d580000 device TFTP from server 192.168.201.1; our IP address is 192.168.201.21 Filename '14202673/tftp-deploy-x0jw1gnu/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x6700000 Loading: *################################################## 55.9 MiB 6.3 MiB/s done Bytes transferred = 58582848 (37de740 hex) U-Boot> setenv initrd_size ${filesize} setenv initrd_size ${filesize} U-Boot> tftp 0x06400000 14202673/tftp-deploy-x0jw1gnu/dtb/bcm2711-rpi-4-b.dtb tftp 0x06400000 14202673/tftp-deploy-x0jw1gnu/dtb/bcm2711-rpi-4-b.dtb Using ethernet@7d580000 device TFTP from server 192.168.201.1; our IP address is 192.168.201.21 Filename '14202673/tftp-deploy-x0jw1gnu/dtb/bcm2711-rpi-4-b.dtb'. Load address: 0x6400000 Loading: *################################################## 25.9 KiB 3.2 MiB/s done Bytes transferred = 26538 (67aa hex) U-Boot> setenv bootargs 'console=ttyS1,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttyS1,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' U-Boot> booti 0x00080000 0x06700000 0x06400000 booti 0x00080000 0x06700000 0x06400000 Moving Image from 0x80000 to 0x200000, end=2120000 ## Loading init Ramdisk from Legacy Image at 06700000 ... Image Name: Image Type: AArch64 Linux RAMDisk Image (uncompressed) Data Size: 58582784 Bytes = 55.9 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 06400000 Booting using the fdt blob at 0x6400000 Loading Ramdisk to 37769000, end 3af47700 ... OK Loading Device Tree to 000000003775f000, end 00000000377687a9 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083] [ 0.000000] Linux version 5.10.218-cip49-rt20 (KernelCI@build-j220253-arm64-gcc-10-defconfig-jn2hs) (aarch64-linux-gnu-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP PREEMPT Thu Jun 6 12:38:49 UTC 2024 [ 0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.4 [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000033400000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] earlycon: bcm2835aux0 at MMIO32 0x00000000fe215040 (options '115200n8') [ 0.000000] printk: bootconsole [bcm2835aux0] enabled [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000001ffffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x1ff016b00-0x1ff018fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff] [ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff] [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000001ffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff] [ 0.000000] On node 0 totalpages: 2061312 [ 0.000000] DMA zone: 3792 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 242688 pages, LIFO batch:63 [ 0.000000] DMA32 zone: 12288 pages used for memmap [ 0.000000] DMA32 zone: 770048 pages, LIFO batch:63 [ 0.000000] Normal zone: 16384 pages used for memmap [ 0.000000] Normal zone: 1048576 pages, LIFO batch:63 [ 0.000000] percpu: Embedded 19 pages/cpu s40408 r8192 d29224 u77824 [ 0.000000] pcpu-alloc: s40408 r8192 d29224 u77824 alloc=19*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: EL2 vector hardening [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 0.000000] CPU features: detected: Spectre-BHB [ 0.000000] CPU features: detected: ARM erratum 1742098 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2028848 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: console=ttyS1,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] software IO TLB: mapped [mem 0x000000002f400000-0x0000000033400000] (64MB) <6>[ 0.000000] Memory: 7864708K/8245248K available (14592K kernel code, 2888K rwdata, 7680K rodata, 6016K init, 504K bss, 315004K reserved, 65536K cma-reserved) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 <6>[ 0.000000] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. <6>[ 0.000000] Trampoline variant of Tasks RCU enabled. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 <6>[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 <6>[ 0.000000] GIC: Using split EOI/Deactivate mode <6>[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys). <6>[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns <6>[ 0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns <6>[ 0.008619] Console: colour dummy device 80x25 <6>[ 0.013468] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000) <6>[ 0.024296] pid_max: default: 32768 minimum: 301 <6>[ 0.029309] LSM: Security Framework initializing <6>[ 0.034411] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 0.042441] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 0.052626] rcu: Hierarchical SRCU implementation. <6>[ 0.060116] EFI services will not be available. <6>[ 0.065273] smp: Bringing up secondary CPUs ... <6>[ 0.070649] Detected PIPT I-cache on CPU1 <6>[ 0.075020] CPU1: Booted secondary processor 0x0000000001 [0x410fd083] <6>[ 0.082513] Detected PIPT I-cache on CPU2 <6>[ 0.086867] CPU2: Booted secondary processor 0x0000000002 [0x410fd083] <6>[ 0.094355] Detected PIPT I-cache on CPU3 <6>[ 0.098708] CPU3: Booted secondary processor 0x0000000003 [0x410fd083] <6>[ 0.105674] smp: Brought up 1 node, 4 CPUs <6>[ 0.110106] SMP: Total of 4 processors activated. <6>[ 0.115135] CPU features: detected: 32-bit EL0 Support <6>[ 0.120614] CPU features: detected: CRC32 instructions <6>[ 0.126082] CPU features: detected: 32-bit EL1 Support <6>[ 0.150219] CPU: All CPU(s) started at EL2 <6>[ 0.154675] alternatives: patching kernel code <6>[ 0.161914] devtmpfs: initialized <6>[ 0.170654] KASLR enabled <6>[ 0.173796] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns <6>[ 0.183933] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) <6>[ 0.193088] pinctrl core: initialized pinctrl subsystem <6>[ 0.200043] DMI not present or invalid. <6>[ 0.204992] NET: Registered protocol family 16 <6>[ 0.211283] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations <6>[ 0.219013] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations <6>[ 0.227701] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations <6>[ 0.236102] audit: initializing netlink subsys (disabled) <5>[ 0.242017] audit: type=2000 audit(0.164:1): state=initialized audit_enabled=0 res=1 <6>[ 0.243088] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.243094] thermal_sys: Registered thermal governor 'power_allocator' <6>[ 0.250136] cpuidle: using governor menu <6>[ 0.267730] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. <6>[ 0.274959] ASID allocator initialised with 32768 entries <6>[ 0.282274] Serial: AMBA PL011 UART driver <6>[ 0.325952] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages <6>[ 0.333026] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages <6>[ 0.340098] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 0.347144] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages <6>[ 0.355671] cryptd: max_cpu_qlen set to 1000 <6>[ 0.363078] ACPI: Interpreter disabled. <6>[ 0.369497] iommu: Default domain type: Translated <6>[ 0.374969] vgaarb: loaded <5>[ 0.378263] SCSI subsystem initialized <7>[ 0.382497] libata version 3.00 loaded. <6>[ 0.386875] usbcore: registered new interface driver usbfs <6>[ 0.392731] usbcore: registered new interface driver hub <6>[ 0.398401] usbcore: registered new device driver usb <4>[ 0.403946] usb_phy_generic phy: supply vcc not found, using dummy regulator <6>[ 0.412168] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.417461] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.426977] PTP clock support registered <6>[ 0.431362] EDAC MC: Ver: 3.0.0 <6>[ 0.436299] FPGA manager framework <6>[ 0.440106] Advanced Linux Sound Architecture Driver Initialized. <6>[ 0.447311] clocksource: Switched to clocksource arch_sys_counter <5>[ 0.453983] VFS: Disk quotas dquot_6.6.0 <6>[ 0.458293] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <6>[ 0.465735] pnp: PnP ACPI: disabled <6>[ 0.476640] NET: Registered protocol family 2 <6>[ 0.482140] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) <6>[ 0.495398] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) <6>[ 0.504409] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.513026] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) <6>[ 0.521791] TCP: Hash tables configured (established 65536 bind 65536) <6>[ 0.528931] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) <6>[ 0.536160] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) <6>[ 0.543977] NET: Registered protocol family 1 <6>[ 0.549243] RPC: Registered named UNIX socket transport module. <6>[ 0.555511] RPC: Registered udp transport module. <6>[ 0.560534] RPC: Registered tcp transport module. <6>[ 0.565563] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.572349] PCI: CLS 0 bytes, default 64 <6>[ 0.576788] Unpacking initramfs... <6>[ 4.892723] Freeing initrd memory: 57208K <6>[ 4.898122] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available <6>[ 4.906819] kvm [1]: IPA Size Limit: 44 bits <6>[ 4.912869] kvm [1]: vgic interrupt IRQ9 <6>[ 4.917280] kvm [1]: Hyp mode initialized successfully <5>[ 4.924833] Initialise system trusted keyrings <6>[ 4.929785] workingset: timestamp_bits=42 max_order=21 bucket_order=0 <6>[ 4.943175] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 4.950085] NFS: Registering the id_resolver key type <5>[ 4.955498] Key type id_resolver registered <5>[ 4.959999] Key type id_legacy registered <6>[ 4.964411] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 4.971467] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <6>[ 4.979416] 9p: Installing v9fs 9p2000 file system support <5>[ 5.049110] Key type asymmetric registered <5>[ 5.053529] Asymmetric key parser 'x509' registered <6>[ 5.058757] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) <6>[ 5.066509] io scheduler mq-deadline registered <6>[ 5.071359] io scheduler kyber registered <4>[ 5.089383] EINJ: ACPI disabled. <6>[ 5.112681] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled <6>[ 5.121158] printk: console [ttyS1] disabled <6>[ 5.125849] fe215040.serial: ttyS1 at MMIO 0xfe215040 (irq = 26, base_baud = 62499999) is a 16550 <6>[ 5.135191] printk: console [ttyS1] enabled <6>[ 5.135191] printk: console [ttyS1] enabled <6>[ 5.144215] printk: bootconsole [bcm2835aux0] disabled <6>[ 5.144215] printk: bootconsole [bcm2835aux0] disabled <6>[ 5.156945] SuperH (H)SCI(F) driver initialized <6>[ 5.162440] msm_serial: driver initialized <6>[ 5.175687] loop: module loaded <6>[ 5.180251] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver <6>[ 5.189039] megasas: 07.714.04.00-rc1 <6>[ 5.199559] tun: Universal TUN/TAP device driver, 1.6 <6>[ 5.205844] thunder_xcv, ver 1.0 <6>[ 5.209463] thunder_bgx, ver 1.0 <6>[ 5.213048] nicpf, ver 1.0 <6>[ 5.217459] hclge is initializing <6>[ 5.221118] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version <6>[ 5.228729] hns3: Copyright (c) 2017 Huawei Corporation. <6>[ 5.234442] e1000: Intel(R) PRO/1000 Network Driver <6>[ 5.239666] e1000: Copyright (c) 1999-2006 Intel Corporation. <6>[ 5.245807] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 5.251114] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 5.257426] igb: Intel(R) Gigabit Ethernet Network Driver <6>[ 5.263174] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 5.269129] igbvf: Intel(R) Gigabit Virtual Function Network Driver <6>[ 5.275761] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. <6>[ 5.282422] sky2: driver version 1.30 <6>[ 5.287701] VFIO - User Level meta-driver version: 0.3 <6>[ 5.295291] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>[ 5.302219] ehci-pci: EHCI PCI platform driver <6>[ 5.307036] ehci-platform: EHCI generic platform driver <6>[ 5.312756] ehci-orion: EHCI orion driver <6>[ 5.317210] ehci-exynos: EHCI Exynos driver <6>[ 5.321830] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver <6>[ 5.328390] ohci-pci: OHCI PCI platform driver <6>[ 5.333213] ohci-platform: OHCI generic platform driver <6>[ 5.338916] ohci-exynos: OHCI Exynos driver <6>[ 5.344103] usbcore: registered new interface driver usb-storage <6>[ 5.353651] i2c /dev entries driver <6>[ 5.359833] brcmstb-i2c fef04500.i2c: @97500hz registered in polling mode <6>[ 5.367457] brcmstb-i2c fef09500.i2c: @97500hz registered in polling mode <6>[ 5.378396] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer <6>[ 5.387217] sdhci: Secure Digital Host Controller Interface driver <6>[ 5.393782] sdhci: Copyright(c) Pierre Ossman <6>[ 5.399099] Synopsys Designware Multimedia Card Interface Driver <6>[ 5.406648] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 5.414973] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 5.423208] usbcore: registered new interface driver usbhid <6>[ 5.429144] usbhid: USB HID core driver <6>[ 5.434425] bcm2835-mbox fe00b880.mailbox: mailbox enabled <6>[ 5.444959] NET: Registered protocol family 17 <6>[ 5.449940] 9pnet: Installing 9P2000 support <5>[ 5.454606] Key type dns_resolver registered <6>[ 5.459647] printk: console [ttyS1]: printing thread started <6>[ 5.459716] registered taskstats version 1 <5>[ 5.459726] Loading compiled-in X.509 certificates <6>[ 5.464508] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 24, base_baud = 0) is a PL011 rev2 <6>[ 5.464692] serial serial0: tty port ttyAMA0 registered <6>[ 5.479526] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-02-25T12:10:40 <4>[ 5.486016] dwc2 fe980000.usb: supply vusb_d not found, using dummy regulator <4>[ 5.486174] dwc2 fe980000.usb: supply vusb_a not found, using dummy regulator <6>[ 5.586938] dwc2 fe980000.usb: EPs: 8, dedicated fifos, 4080 entries in SPRAM <6>[ 5.592798] sdhci-iproc fe300000.mmc: allocated mmc-pwrseq <6>[ 5.625446] mmc0: SDHCI controller on fe300000.mmc [fe300000.mmc] using PIO <6>[ 5.638019] mmc1: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA <4>[ 5.641287] mmc0: queuing unknown CIS tuple 0x80 (2 bytes) <4>[ 5.642979] mmc0: queuing unknown CIS tuple 0x80 (3 bytes) <4>[ 5.644679] mmc0: queuing unknown CIS tuple 0x80 (3 bytes) <4>[ 5.647711] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) <4>[ 5.649396] mmc0: queuing unknown CIS tuple 0x80 (3 bytes) <6>[ 5.710731] mmc0: new high speed SDIO card at address 0001 <6>[ 5.747362] mmc1: new ultra high speed DDR50 SDHC card at address 0001 <6>[ 5.747988] mmcblk1: mmc1:0001 SD 14.8 GiB <6>[ 5.750054] mmcblk1: p1 p2 p3 p4 <6>[ 17.907340] clk: Disabling unused clocks <6>[ 17.907433] ALSA device list: <6>[ 17.907441] No soundcards found. <6>[ 17.912683] Freeing unused kernel memory: 6016K <6>[ 17.912944] Run /init as init process <30>[ 17.944502] systemd[1]: System time before build time, advancing clock. <6>[ 17.958533] NET: Registered protocol family 10 <6>[ 17.959587] Segment Routing with IPv6 Welcom<30>[ 17.974666] systemd[1]: systemd 252.22-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) e to [1<30>[ 17.974699] systemd[1]: Detected architecture arm64. mDebian GNU/Linux 12 (bookworm)! <30>[ 18.027688] systemd[1]: Hostname set to . <30>[ 18.309794] systemd[1]: Queued start job for default target graphical.target. <30>[ 18.315736] systemd[1]: Created slice system-getty.slice - Slice /system/getty. [ OK ] Created slice system-getty.slice - Slice /system/getty. [ OK ] Created slic<30>[ 18.345020] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. e system-modpr…lice - Slice /system/modprobe. [ OK ] Crea<30>[ 18.373169] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty. ted slice system-seria… - Slice /system/serial-getty. [ OK ] Created slic<30>[ 18.400630] systemd[1]: Created slice user.slice - User and Session Slice. e user.slice - User and Session Slice. [ OK ] Started sys<30>[ 18.423766] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch. temd-ask-passwo…quests to Console Directory Watch. [ OK ] Started systemd-ask<30>[ 18.451672] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. -passwo… Requests to Wall Directory Watch. Expecting device dev-ttyS1.dev<30>[ 18.479530] systemd[1]: proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point was skipped because of an unmet condition check (ConditionPathExists=/proc/sys/fs/binfmt_misc). ice <30>[ 18.479642] systemd[1]: Expecting device dev-ttyS1.device - /dev/ttyS1... - /dev/ttyS1... [ OK ] Reached target cryp<30>[ 18.523480] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes. tsetup.…get - Local Encrypted Volumes. [ OK ] Reached target inte<30>[ 18.551507] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. grityse…Local Integrity Protected Volumes. [ OK ] Reached target path<30>[ 18.579494] systemd[1]: Reached target paths.target - Path Units. s.target - Path Units. [ OK ] Reached target remo<30>[ 18.603489] systemd[1]: Reached target remote-fs.target - Remote File Systems. te-fs.target - Remote File Systems. [ OK ] Reached target slic<30>[ 18.627450] systemd[1]: Reached target slices.target - Slice Units. es.target - Slice Units. [ OK ] Reached target swap<30>[ 18.651488] systemd[1]: Reached target swap.target - Swaps. .target - Swaps. [ OK ] Reached target veri<30>[ 18.671510] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. tysetup… - Local Verity Protected Volumes. [ OK ] Listening on system<30>[ 18.699735] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. d-initc… initctl Compatibility Named Pipe. [ OK ] Listening on<30>[ 18.728499] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket. systemd-journ…socket - Journal Audit Socket. [ OK ] Listening on [0;1;3<30>[ 18.756011] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). 9msystemd-journ…t - Journal Socket (/dev/log). [ OK ] Listening on [0;1;3<30>[ 18.784058] systemd[1]: Listening on systemd-journald.socket - Journal Socket. 9msystemd-journald.socket - Journal Socket. [ OK ] Listening on [0;1;3<30>[ 18.812109] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. 9msystemd-udevd….socket - udev Control Socket. [ OK ] Listening on [0;1;3<30>[ 18.839929] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. 9msystemd-udevd…l.socket - udev Kernel Socket. Mounting dev-hugepages.mount[<30>[ 18.871445] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... 0m - Huge Pages File System... Mounting dev-mqueue.mount…P<30>[ 18.899365] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... OSIX Message Queue File System... Mounting sys-kernel-debug.…<30>[ 18.927515] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... [0m - Kernel Debug File System... <30>[ 18.951919] systemd[1]: sys-kernel-tracing.mount - Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing). <30>[ 18.956478] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... Starting kmod-static-nodes…ate List of Static Device Nodes... Starting modprobe@conf<30>[ 19.004279] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... igfs…m - Load Kernel Module configfs... Starting modprobe@dm_m<30>[ 19.035989] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... od.s…[0m - Load Kernel Module dm_mod..<6>[ 19.050408] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com . Starting modprobe@drm.<30>[ 19.076005] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... service - Load Kernel Module drm... Starting modprobe@efi_<30>[ 19.104214] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... psto…- Load Kernel Module efi_pstore... Starting modprobe@loop<30>[ 19.136010] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... .ser…e - Load Kernel Module loop... <28>[ 19.164144] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. <28>[ 19.164168] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) <30>[ 19.167850] systemd[1]: Starting systemd-journald.service - Journal Service... Starting systemd-journald.service - Journal Service... Starting syste<30>[ 19.220488] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... md-modules-l…rvice - Load Kernel Modules... Starting systemd-netwo<30>[ 19.252218] systemd[1]: Starting systemd-network-generator.service - Generate network units from Kernel command line... rk-g… units from Kernel command line... Starting systemd-remou<30>[ 19.283855] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... nt-f…nt Root and Kernel File Systems... Starting systemd-udev-<30>[ 19.316013] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... trig…[0m - Coldplug All udev Devices... [<30>[ 19.350649] systemd[1]: Started systemd-journald.service - Journal Service. OK ] Started systemd-journald.service - Journal Service. [ OK ] Mounted dev-hugepages.mount - Huge Pages File System. [ OK ] Mounted dev-mqueue.mount[…- POSIX Message Queue File System. [ OK ] Mounted sys-kernel-debug.m…nt - Kernel Debug File System. [ OK ] Finished kmod-static-nodes…reate List of Static Device Nodes. [ OK ] Finished modprobe@configfs…[0m - Load Kernel Module configfs. [ OK ] Finished modprobe@dm_mod.s…e - Load Kernel Module dm_mod. [ OK ] Finished modprobe@drm.service - Load Kernel Module drm. [ OK ] Finished modprobe@efi_psto…m - Load Kernel Module efi_pstore. [ OK ] Finished modprobe@loop.service - Load Kernel Module loop. [ OK ] Finished systemd-modules-l…service - Load Kernel Modules. [ OK ] Finished systemd-network-g…rk units from Kernel command line. [FAILED] Failed to start systemd-re…ount Root and Kernel File Systems. See 'systemctl status systemd-remount-fs.service' for details. [ OK ] Reached target network-pre…get - Preparation for Network. Mounting sys-kernel-config…ernel Configuration File System... Starting systemd-journal-f…h Journal to Persistent Storage... <46>[ 19.707911] systemd-journald[129]: Received client request to flush runtime journal. Starting systemd-random-se…ice - Load/Save Random Seed... Starting systemd-sysctl.se…ce - Apply Kernel Variables... Starting systemd-sysusers.…rvice - Create System Users... [ OK ] Mounted sys-kernel-config.… Kernel Configuration File System. [ OK ] Finished systemd-journal-f…ush Journal to Persistent Storage. [ OK ] Finished systemd-sysctl.service - Apply Kernel Variables. [ OK ] Finished systemd-sysusers.service - Create System Users. Starting systemd-tmpfiles-…ate Static Device Nodes in /dev... [ OK ] Finished systemd-tmpfiles-…reate Static Device Nodes in /dev. [ OK ] Reached target local-fs-pr…reparation for Local File Systems. [ OK ] Reached target local-fs.target - Local File Systems. Starting systemd-tmpfiles-… Volatile Files and Directories... Starting systemd-udevd.ser…ger for Device Events and Files... [ OK ] Finished systemd-udev-trig…e - Coldplug All udev Devices. [ OK ] Finished systemd-tmpfiles-…te Volatile Files and Directories. Starting systemd-timesyncd… - Network Time Synchronization... Starting systemd-update-ut…rd System Boot/Shutdown in UTMP... [ OK ] Finished systemd-update-ut…cord System Boot/Shutdown in UTMP. [ OK ] Started systemd-udevd.serv…nager for Device Events and Files. [ OK ] Found device dev-ttyS1.device - /dev/ttyS1. [ OK ] Started systemd-timesyncd.…0m - Network Time Synchronization. [ OK ] Reached target sysinit.target - System Initialization. [ OK ] Started systemd-tmpfiles-c… Cleanup of Temporary Directories. [ OK ] Reached target time-set.target - System Time Set. [ OK ] Started fstrim.timer - Discard unused blocks once a week. [ OK ] Reached target timers.target - Timer Units. [ OK ] Listening on dbus.socket[…- D-Bus System Message Bus Socket. [ OK ] Reached target sockets.target - Socket Units. [ OK ] Reached target basic.target - Basic System. Starting dbus.service - D-Bus System Message Bus... <5>[ 20.573897] random: dbus-daemon: uninitialized urandom read (12 bytes read) Starting systemd-logind.se…ice - User Login Management... Starting systemd-user-sess…vice - Permit User Sessions... <5>[ 20.614140] random: dbus-daemon: uninitialized urandom read (12 bytes read) [ OK ] Started dbus.service - D-Bus System Message Bus. [ OK ] Finished systemd-user-sess…ervice - Permit User Sessions. [ OK ] Started systemd-logind.service - User Login Management. [ OK ] Started getty@tty1.service - Getty on tty1. [ OK ] Started serial-getty@ttyS1…rvice - Serial Getty on ttyS1. [ OK ] Reached target getty.target - Login Prompts. [ OK ] Reached target multi-user.target - Multi-User System. [ OK ] Reached target graphical.target - Graphical Interface. Starting systemd-update-ut… Record Runlevel Change in UTMP... <6>[ 21.102929] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 [ OK ] Finished systemd-update-ut… - Record Runlevel Change in UTMP. <6>[ 21.120922] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: <6>[ 21.120960] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff] <6>[ 21.121000] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x0603ffffff -> 0x00f8000000 [<6>[ 21.121041] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff -> 0x0400000000 OK [<6>[ 21.131780] iproc-rng200 fe104000.rng: hwrng registered 0m] Reac<5>[ 21.156520] cfg80211: Loading compiled-in X.509 certificates for regulatory database hed target usb-gadget.…m - Hardware activated USB gadget. <5>[ 21.191844] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' <5>[ 21.192788] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' <4>[ 21.192930] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 <4>[ 21.192943] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db <6>[ 21.211464] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus <6>[ 21.213464] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC) <6>[ 21.213712] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 <6>[ 21.213723] pci_bus 0000:00: root bus resource [bus 00-ff] <6>[ 21.213737] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff]) <6>[ 21.213778] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 <6>[ 21.213863] pci 0000:00:00.0: PME# supported from D0 D3hot <6>[ 21.227440] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 <6>[ 21.227512] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 21.227696] pci 0000:01:00.0: PME# supported from D0 D3hot <6>[ 21.241641] pci 0000:00:00.0: BAR 14: assigned [mem 0x600000000-0x6000fffff] <6>[ 21.241668] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit] <6>[ 21.241690] pci 0000:00:00.0: PCI bridge to [bus 01] <6>[ 21.241701] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] <6>[ 21.241947] pcieport 0000:00:00.0: enabling device (0000 -> 0002) <6>[ 21.242123] pcieport 0000:00:00.0: PME: Signaling with IRQ 51 <3>[ 21.268631] debugfs: Directory 'fef00700.hdmi' with parent 'vc4-hdmi-0' already present! [ OK ] Listening on systemd-rfkil…l Switch Status /dev/rfkill Watch. <6>[ 21.287473] xhci_hcd 0000:01:00.0: xHCI Host Controller <6>[ 21.287520] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 <6>[ 21.287954] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000040000000890 <6>[ 21.288859] xhci_hcd 0000:01:00.0: xHCI Host Controller <6>[ 21.288877] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 <6>[ 21.288893] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed <6>[ 21.291979] vc4-drm gpu: bound fef00700.hdmi (ops vc4_hdmi_ops [vc4]) <3>[ 21.292479] debugfs: Directory 'fef05700.hdmi' with parent 'vc4-hdmi-1' already present! [ OK [<6>[ 21.295862] hub 1-0:1.0: USB hub found 0m] Reac<6>[ 21.295938] hub 1-0:1.0: 1 port detected hed targ<6>[ 21.297514] hub 2-0:1.0: USB hub found et [0;1<6>[ 21.297586] hub 2-0:1.0: 4 ports detected ;39msound.target - Sound Card. <6>[ 21.300394] vc4-drm gpu: bound fef05700.hdmi (ops vc4_hdmi_ops [vc4]) <6>[ 21.304954] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) <6>[ 21.306991] vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops [vc4]) <6>[ 21.307184] vc4-drm gpu: bound fe206000.pixelvalve (ops vc4_crtc_ops [vc4]) <6>[ 21.314619] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 <4>[ 21.314874] brcmfmac mmc0:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.bin failed with error -2 <4>[ 21.314889] brcmfmac mmc0:0001:1: Falling back to sysfs fallback for: brcm/brcmfmac43455-sdio.bin <6>[ 21.322237] vc4-drm gpu: bound fe207000.pixelvalve (ops vc4_crtc_ops [vc4]) <6>[ 21.322520] vc4-drm gpu: bound fe20a000.pixelvalve (ops vc4_crtc_ops [vc4]) <6>[ 21.322670] vc4-drm gpu: bound fe216000.pixelvalve (ops vc4_crtc_ops [vc4]) <6>[ 21.340542] Bluetooth: Core ver 2.22 <6>[ 21.340634] NET: Registered protocol family 31 <6>[ 21.340640] Bluetooth: HCI device and connection manager initialized <6>[ 21.340657] Bluetooth: HCI socket layer initialized <6>[ 21.340666] Bluetooth: L2CAP socket layer initialized <6>[ 21.340686] Bluetooth: SCO socket layer initialized <6>[ 21.402368] cfg80211: failed to load regulatory.db <6>[ 21.407682] bcmgenet fd580000.ethernet end0: renamed from eth0 <6>[ 21.427930] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 0 <6>[ 21.438541] vc4-drm gpu: [drm] Cannot find any crtc or sizes <6>[ 21.459819] Bluetooth: HCI UART driver ver 2.3 <6>[ 21.459836] Bluetooth: HCI UART protocol H4 registered <6>[ 21.461452] Bluetooth: HCI UART protocol LL registered <4>[ 21.465136] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator <6>[ 21.465411] Bluetooth: HCI UART protocol Broadcom registered <6>[ 21.466642] Bluetooth: HCI UART protocol QCA registered <4>[ 21.476982] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator <6>[ 21.551320] usb 1-1: new high-speed USB device number 2 using xhci_hcd <6>[ 21.595432] uart-pl011 fe201000.serial: no DMA platform data <6>[ 21.703071] hub 1-1:1.0: USB hub found <6>[ 21.704026] hub 1-1:1.0: 4 ports detected Starting systemd-rfkill.se…Load/Save RF Kill Switch Status... [ OK ] Started systemd-rfkill.ser…- Load/Save RF Kill Switch Status. [ OK ] Reached target bluetooth.target - Bluetooth Support. <6>[ 21.835849] Bluetooth: hci0: BCM: chip id 107 <6>[ 21.836108] Bluetooth: hci0: BCM: features 0x2f <6>[ 21.837570] Bluetooth: hci0: BCM4345C0 <6>[ 21.837574] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000 <3>[ 21.838716] Bluetooth: hci0: BCM: firmware Patch file not found, tried: <3>[ 21.838724] Bluetooth: hci0: BCM: 'brcm/BCM4345C0.hcd' <3>[ 21.838726] Bluetooth: hci0: BCM: 'brcm/BCM.hcd' <5>[ 21.883312] random: crng init done [ OK ] Finished systemd-random-se…rvice - Load/Save Random Seed. Debian GNU/Linux 12 debian-bookworm-arm64 ttyS1 debian-bookworm-arm64 login: root (automatic login) Linux debian-bookworm-arm64 5.10.218-cip49-rt20 #1 SMP PREEMPT Thu Jun 6 12:38:49 UTC 2024 aarch64 The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-14202673/environment . /lava-14202673/environment / # /lava-14202673/bin/lava-test-runner /lava-14202673/0 <3>[ 22.436258] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50 /lava-14202673/bin/lava-test-runner /lava-14202673/0 + export TESTRUN_ID=0_igt-kms-vc4 <8>[ 22.526638] + cd /lava-14202673/0/tests/0_igt-kms-vc4 + cat uuid + UUID=14202673_1.5.2.4.1 + set +x + IGT_FORCE_DRIVER=vc4 /usr/bin/igt-parser.sh core_auth core_getclient core_getstats core_getversio<8>[ 22.548369] n core_setmaster_vs_auth drm_read kms_addfb_basic kms_atomic kms_flip_event_leak kms_prop_blob kms_setmode kms_vblank vc4_create<14>[ 22.564760] [IGT] core_auth: executing _bo vc4_<14>[ 22.565040] [IGT] core_auth: starting subtest getclient-simple dmabuf_p<14>[ 22.565236] [IGT] core_auth: finished subtest getclient-simple, SUCCESS oll vc4_<14>[ 22.565332] [IGT] core_auth: exiting, ret=0 label_bo<8>[ 22.570099] vc4_loo<14>[ 22.592290] [IGT] core_auth: executing kup_fail vc4_mmap vc4_prefmon vc<14>[ 22.605290] [IGT] core_auth: starting subtest getclient-master-drop 4_purgea<14>[ 22.605583] [IGT] core_auth: finished subtest getclient-master-drop, SUCCESS ble_bo v<14>[ 22.605698] [IGT] core_auth: exiting, ret=0 c4_tilin<8>[ 22.610654] g vc4_wa<14>[ 22.628300] [IGT] core_auth: executing it_bo vc4_wait_seqno IG<14>[ 22.641856] [IGT] core_auth: starting subtest basic-auth T-Versio<14>[ 22.642035] [IGT] core_auth: finished subtest basic-auth, SUCCESS n: 1.28-<14>[ 22.642095] [IGT] core_auth: exiting, ret=0 ga44ebfe<8>[ 22.646597] (aarch6<14>[ 22.662108] [IGT] core_auth: executing 4) (Linux: 5.10.<14>[ 22.674696] [IGT] core_auth: starting subtest many-magics 218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305720 for randomisation Starting subtest: getclient-simple Opened device: /dev/dri/card0 <14>[ 22.692319] [IGT] core_auth: finished subtest many-magics, SUCCESS Subtest <14>[ 22.692406] [IGT] core_auth: exiting, ret=0 getclien<8>[ 22.697053] t-simple<8>[ 22.698383] : SUCCESS (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305720 for randomisation Starting subtest: get<14>[ 22.731606] [IGT] core_getclient: executing client-m<14>[ 22.731992] [IGT] core_getclient: exiting, ret=0 aster-dr<8>[ 22.736726] op Opened device: /dev/dri/card0 Subtest getclient-master-drop: SUCCESS (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305720 for randomisation Opened de<14>[ 22.770975] [IGT] core_getstats: executing vice: /d<14>[ 22.771445] [IGT] core_getstats: exiting, ret=0 ev/dri/card0 Starting subtest: basic-auth Subtest basic-auth: SUCC<8>[ 22.786448] ESS (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305720 for randomisation Opened device: /dev/dri/card0 Starting subtest: many-magics Reopening device failed after 1020 opens Subtest many-magics: SUCCESS (0.017s) IGT-Version: 1.28-ga44ebfe (<14>[ 22.822201] [IGT] core_getversion: executing aarch64)<14>[ 22.822630] [IGT] core_getversion: exiting, ret=0 (Linux:<8>[ 22.828275] 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305720 for randomisation Opened device: /dev/dri/card0 SUCCESS (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305720 for randomisation Opened device: /dev/dri/card0 SUCCES<14>[ 22.864994] [IGT] core_setmaster_vs_auth: executing S (0.000<14>[ 22.865573] [IGT] core_setmaster_vs_auth: exiting, ret=0 s) IGT-<8>[ 22.870985] Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.21<8>[ 22.891195] 8-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305720 for randomisation Opened device: /dev/dri/card0 SUCCESS (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=170<14>[ 22.911779] [IGT] drm_read: executing 6305720 for randomisation Opened device: /dev/dri/card0 SUCCESS (0.000s) IGT-Version:<6>[ 22.926745] vc4-drm gpu: [drm] Cannot find any crtc or sizes 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305720 for randomisation Opened device: /dev/dri/card0 Starting subtest: invali<14>[ 23.077455] [IGT] drm_read: starting subtest invalid-buffer d-buffer<14>[ 23.077580] [IGT] drm_read: finished subtest invalid-buffer, SUCCESS Su<14>[ 23.077780] [IGT] drm_read: exiting, ret=0 btest in<8>[ 23.083804] valid-buffer: SU<14>[ 23.106377] [IGT] drm_read: executing CCESS (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305721 for randomisation Opened device: /dev/dri/card0 Starting subtest<14>[ 23.266363] [IGT] drm_read: starting subtest fault-buffer : fault-<14>[ 23.266595] [IGT] drm_read: finished subtest fault-buffer, SUCCESS buffer <14>[ 23.266745] [IGT] drm_read: exiting, ret=0 Subt<8>[ 23.272802] est fault-buffer: SUCCES<14>[ 23.294121] [IGT] drm_read: executing S (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305721 for randomisation Opened device: /dev/dri/card0 Starting subtest: empty-block <14>[ 23.452731] [IGT] drm_read: starting subtest empty-block Subtest empty-block: SUCCESS<14>[ 24.453061] [IGT] drm_read: finished subtest empty-block, SUCCESS (1.000s<14>[ 24.454774] [IGT] drm_read: exiting, ret=0 ) <8>[ 24.459656] IGT-Vers<14>[ 24.479124] [IGT] drm_read: executing ion: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305722 for randomisation Opened device: /dev/dri/card0 Starting subtest: empty-<14>[ 24.641640] [IGT] drm_read: starting subtest empty-nonblock nonblock<14>[ 24.641768] [IGT] drm_read: finished subtest empty-nonblock, SUCCESS Su<14>[ 24.641909] [IGT] drm_read: exiting, ret=0 btest em<8>[ 24.648614] pty-nonblock: SUCCESS (0.000s) IGT-Version: 1.28-ga44ebfe (<14>[ 24.672373] [IGT] drm_read: executing aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305722 for randomisation Opened device: /dev/dri/card0 <14>[ 24.831269] [IGT] drm_read: starting subtest short-buffer-block Starting subtest: short-<14>[ 24.837835] [IGT] drm_read: finished subtest short-buffer-block, SUCCESS buffer-b<14>[ 24.837977] [IGT] drm_read: exiting, ret=0 lock [<8>[ 24.844722] 1mSubtest short-buffer-block: SUCCESS (0.000s) IGT-Version: 1.28-ga44ebfe (aarc<14>[ 24.868527] [IGT] drm_read: executing h64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305722 for randomisation Opened device: /dev/dri/card0 Starting subtest: short-buffer-n<14>[ 25.027476] [IGT] drm_read: starting subtest short-buffer-nonblock onblock <14>[ 25.027616] [IGT] drm_read: finished subtest short-buffer-nonblock, SUCCESS Sub<14>[ 25.027754] [IGT] drm_read: exiting, ret=0 test sho<8>[ 25.034841] rt-buffe<14>[ 25.058957] [IGT] drm_read: executing r-nonblock: SUCCESS (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305723 for randomisation Opened device: /dev/dri/card0 Starting subtest: short-buffer-wakeup <14>[ 25.223637] [IGT] drm_read: starting subtest short-buffer-wakeup Subtest short-buffer-wakeup:<14>[ 57.436733] [IGT] drm_read: finished subtest short-buffer-wakeup, SUCCESS SUCCESS<14>[ 57.436917] [IGT] drm_read: exiting, ret=0 (32.213<8>[ 57.443239] s) <8>[ 57.445427] <8>[ 57.470155] IGT-Version: 1.28-ga44ebfe (aarc<14>[ 57.489087] [IGT] kms_addfb_basic: executing h64) (Li<14>[ 57.494001] [IGT] kms_addfb_basic: starting subtest unused-handle nux: 5.10.218-cip49-rt20 aarch64) Using<14>[ 57.503953] [IGT] kms_addfb_basic: finished subtest unused-handle, SUCCESS IGT_SRANDOM=1706305755 for randomisation Opened device: /dev/dri/card0 Starting subtest: unused-handle Subtest unused-handle: SUCCESS (0.000s) Test requirement not met in function<14>[ 57.530293] [IGT] kms_addfb_basic: exiting, ret=0 igt_req<8>[ 57.534923] uire_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_<14>[ 57.551903] [IGT] kms_addfb_basic: executing intel, f<14>[ 57.555337] [IGT] kms_addfb_basic: starting subtest unused-pitches ile ../lib/drmtest.c:880: Test requirem<14>[ 57.568025] [IGT] kms_addfb_basic: finished subtest unused-pitches, SUCCESS ent: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux<14>[ 57.594514] [IGT] kms_addfb_basic: exiting, ret=0 : 5.10.2<8>[ 57.599145] 18-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305755 for randomisation Opened device: /dev/dri/card0 Starting subtest:<14>[ 57.615864] [IGT] kms_addfb_basic: executing unused-<14>[ 57.619192] [IGT] kms_addfb_basic: starting subtest unused-offsets pitches <14>[ 57.619342] [IGT] kms_addfb_basic: finished subtest unused-offsets, SUCCESS Subtest unused-pitches: SUCCESS (0.000s) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requi<14>[ 57.654870] [IGT] kms_addfb_basic: exiting, ret=0 rement n<8>[ 57.659494] ot met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requiremen<14>[ 57.675838] [IGT] kms_addfb_basic: executing t not me<14>[ 57.679163] [IGT] kms_addfb_basic: starting subtest unused-modifier t in fun<14>[ 57.679273] [IGT] kms_addfb_basic: finished subtest unused-modifier, SUCCESS ction igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM<14>[ 57.715207] [IGT] kms_addfb_basic: exiting, ret=0 =1706305755 for randomisation Opened device: /dev/dri/card0 Starting subtest: <8>[ 57.725939] unused-offsets Subtest unused-offsets: SUCCESS (0.000s) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:<14>[ 57.744501] [IGT] kms_addfb_basic: executing <14>[ 57.747946] [IGT] kms_addfb_basic: starting subtest clobberred-modifier 880: Te<14>[ 57.759973] [IGT] kms_addfb_basic: finished subtest clobberred-modifier, SKIP st requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in func<14>[ 57.783323] [IGT] kms_addfb_basic: exiting, ret=77 tion igt<8>[ 57.788865] _require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarc<14>[ 57.809281] [IGT] kms_addfb_basic: executing h64) Us<14>[ 57.812641] [IGT] kms_addfb_basic: starting subtest invalid-smem-bo-on-discrete ing IGT_SRANDOM=1706305755 for r<14>[ 57.825281] [IGT] kms_addfb_basic: finished subtest invalid-smem-bo-on-discrete, SKIP andomisation Opened device: /dev/dri/card0 Starting subtest: unused-modifier Subtest unused-modifier: SUCCESS (0.000s) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requ<14>[ 57.851618] [IGT] kms_addfb_basic: exiting, ret=77 irement:<8>[ 57.856247] is_intel_device(fd) Test requirement not met in function igt_r<14>[ 57.873982] [IGT] kms_addfb_basic: executing equire_i<14>[ 57.877346] [IGT] kms_addfb_basic: starting subtest legacy-format ntel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_<14>[ 57.900509] [IGT] kms_addfb_basic: finished subtest legacy-format, SUCCESS device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305755 for randomisation Opened device: /dev/dri/card0 Starting subtest: <14>[ 57.926114] [IGT] kms_addfb_basic: exiting, ret=0 clobberr<8>[ 57.931246] ed-modifier Test requirement not met in function igt_require_i915, file ../lib/drmtest.c:885: Test requirement: is_i915_device(fd) Subtest clobberred-modifier: SKIP (0.0<14>[ 57.951484] [IGT] kms_addfb_basic: executing 00s)<14>[ 57.956331] [IGT] kms_addfb_basic: starting subtest no-handle Test requirement not met in function igt_requi<14>[ 57.967725] [IGT] kms_addfb_basic: finished subtest no-handle, SUCCESS re_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_devi<14>[ 57.994164] [IGT] kms_addfb_basic: exiting, ret=0 ce(fd) <8>[ 57.998720] Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-V<14>[ 58.018611] [IGT] kms_addfb_basic: executing ersion: <14>[ 58.023605] [IGT] kms_addfb_basic: starting subtest basic 1.28-ga4<14>[ 58.030933] [IGT] kms_addfb_basic: finished subtest basic, SUCCESS 4ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305755 for randomisation Opened device: /dev/dri/card0 Starting subtest: invalid-smem-bo-on-discrete Test requirement not<14>[ 58.054425] [IGT] kms_addfb_basic: exiting, ret=0 met in <8>[ 58.059246] function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Subtest invalid-smem-bo-on-discrete: <14>[ 58.075719] [IGT] kms_addfb_basic: executing SKIP (0.<14>[ 58.080669] [IGT] kms_addfb_basic: starting subtest bad-pitch-0 000s) Test requirement not met in function <14>[ 58.091898] [IGT] kms_addfb_basic: finished subtest bad-pitch-0, SUCCESS igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_i<14>[ 58.118837] [IGT] kms_addfb_basic: exiting, ret=0 ntel_dev<8>[ 58.123422] ice(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(f<14>[ 58.142611] [IGT] kms_addfb_basic: executing d) IGT-<14>[ 58.147475] [IGT] kms_addfb_basic: starting subtest bad-pitch-32 Version: 1.28-ga44ebfe (aarch64) (Linux:<46>[ 58.156032] systemd-journald[129]: Data hash table of /var/log/journal/c3f909ee3e324895ab90ff2613af9260/system.journal has a fill level at 75.0 (1536 of 2047 items, 524288 file size, 341 bytes per hash table item), suggesting rotation. 5.10.21<46>[ 58.156046] systemd-journald[129]: /var/log/journal/c3f909ee3e324895ab90ff2613af9260/system.journal: Journal header limits reached or header out-of-date, rotating. 8-cip49-<14>[ 58.156059] [IGT] kms_addfb_basic: finished subtest bad-pitch-32, SUCCESS rt20 aarch64) Using IGT_SRANDOM=1706305755 for randomisation Opened device: /dev/dri/card0 Starting subtest: legacy-format Successfully fuzzed 10000 {bpp, depth} variations Subtest le<14>[ 58.219750] [IGT] kms_addfb_basic: exiting, ret=0 gacy-for<8>[ 58.225061] mat: SUCCESS (0.013s) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c<14>[ 58.242675] [IGT] kms_addfb_basic: executing :880: T<14>[ 58.247403] [IGT] kms_addfb_basic: starting subtest bad-pitch-63 est requirement: is_intel_device(fd) Test requi<14>[ 58.255642] [IGT] kms_addfb_basic: finished subtest bad-pitch-63, SUCCESS rement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:8<14>[ 58.282010] [IGT] kms_addfb_basic: exiting, ret=0 80: Tes<8>[ 58.286817] t requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM<14>[ 58.303748] [IGT] kms_addfb_basic: executing =1706305<14>[ 58.308568] [IGT] kms_addfb_basic: starting subtest bad-pitch-128 756 for randomisation Opened device: /d<14>[ 58.320058] [IGT] kms_addfb_basic: finished subtest bad-pitch-128, SUCCESS ev/dri/card0 Starting subtest: no-handle Subtest no-handle: SUCCESS (0.000s) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is<14>[ 58.345973] [IGT] kms_addfb_basic: exiting, ret=0 _intel_d<8>[ 58.350972] evice(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device<14>[ 58.370554] [IGT] kms_addfb_basic: executing (fd) Te<14>[ 58.375402] [IGT] kms_addfb_basic: starting subtest bad-pitch-256 st requirement not met in function igt_r<14>[ 58.384023] [IGT] kms_addfb_basic: finished subtest bad-pitch-256, SUCCESS equire_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305756 for ran<14>[ 58.410489] [IGT] kms_addfb_basic: exiting, ret=0 domisati<8>[ 58.415120] on Opened device: /dev/dri/card0 Starting subtest: basic Subtest basic: SUCCESS (0.000s) Test requirement not met in<14>[ 58.434062] [IGT] kms_addfb_basic: executing function igt_require_intel, file ../lib<14>[ 58.443159] [IGT] kms_addfb_basic: starting subtest bad-pitch-1024 /drmtest<14>[ 58.443279] [IGT] kms_addfb_basic: finished subtest bad-pitch-1024, SUCCESS .c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not <14>[ 58.474589] [IGT] kms_addfb_basic: exiting, ret=0 met in f<8>[ 58.479250] unction igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch6<14>[ 58.497563] [IGT] kms_addfb_basic: executing <14>[ 58.502435] [IGT] kms_addfb_basic: starting subtest bad-pitch-999 4) (Linux: 5.10.218-cip49-rt20 aarch64) Using I<14>[ 58.511387] [IGT] kms_addfb_basic: finished subtest bad-pitch-999, SUCCESS GT_SRANDOM=1706305756 for randomisation Opened device: /dev/dri/card0 Starting subtest: bad-pitch-0 Subtest bad-pitch-0: SUCCESS (0.000s) Test requirement not met in function igt_r<14>[ 58.538564] [IGT] kms_addfb_basic: exiting, ret=0 equire_i<8>[ 58.543171] ntel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel,<14>[ 58.560921] [IGT] kms_addfb_basic: executing file ..<14>[ 58.565773] [IGT] kms_addfb_basic: starting subtest bad-pitch-65536 /lib/drmtest.c:880: Test requirement: i<14>[ 58.576186] [IGT] kms_addfb_basic: finished subtest bad-pitch-65536, SUCCESS s_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305756 for randomisation Opened device: /dev/dri/card0 Starting subtest: bad-pitch-32 Subtest bad-pitch-32: SUCCESS (0.000s) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305756 for randomisation Opened device: /dev/dri/card0 Starting subtest: bad-pitch-63 Subtest bad-pitch-63: SUCCESS (0.000s) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305756 for randomisation Opened device: /dev/dri/card0 Starting subtest: bad-pitch-128 Subtest bad-pitch-128: SUCCESS (0.000s) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305756 for randomisation Opened device: /dev/dri/card0 Starting subtest: bad-pitch-256 Subtest bad-pitch-256: SUCCESS (0.000s) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305756 for randomisation Opened device: /dev/dri/card0 Starting subtest: bad-pitch-1024 Subtest bad-pitch-1024: SUCCESS (0.000s) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305756 for randomisation Opened device: /dev/dri/card0 Starting subtest: bad-pitch-999 Subtest bad-pitch-999: SUCCESS (0.000s) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305756 for randomisation Opened device: /dev/dri/card0 Starting subtest: bad-pitch-65536 Subtest bad-pitch-65536: SUCCESS (0.000s) Test requirement not met in f<14>[ 58.941165] [IGT] kms_addfb_basic: exiting, ret=0 unction <8>[ 58.947623] igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requiremen<14>[ 58.971481] [IGT] kms_addfb_basic: executing t not me<14>[ 58.977874] [IGT] kms_addfb_basic: starting subtest invalid-get-prop-any t in function igt_require_intel,<14>[ 58.988636] [IGT] kms_addfb_basic: finished subtest invalid-get-prop-any, SUCCESS file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305757 for randomis<14>[ 59.014571] [IGT] kms_addfb_basic: exiting, ret=0 ation O<8>[ 59.020469] pened device: /dev/dri/card0 Starting subtest: invalid-get-prop-any Subtest invalid-get-prop-any: SUCCESS (0.000s) Test requirement not met in function igt_r<14>[ 59.043176] [IGT] kms_addfb_basic: executing equire_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) <14>[ 59.054640] [IGT] kms_addfb_basic: starting subtest invalid-get-prop <14>[ 59.054732] [IGT] kms_addfb_basic: finished subtest invalid-get-prop, SUCCESS Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/<14>[ 59.085363] [IGT] kms_addfb_basic: exiting, ret=0 drmtest.<8>[ 59.091973] c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305757 for randomisation Opened<14>[ 59.115013] [IGT] kms_addfb_basic: executing device: /dev/dri/card0 Starting subtest: invalid-get-prop Subtest invalid<14>[ 59.126377] [IGT] kms_addfb_basic: starting subtest invalid-set-prop-any -get-pro<14>[ 59.126460] [IGT] kms_addfb_basic: finished subtest invalid-set-prop-any, SUCCESS p: SUCCESS (0.000s) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function<14>[ 59.158398] [IGT] kms_addfb_basic: exiting, ret=0 igt_req<8>[ 59.163889] uire_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test <14>[ 59.184617] [IGT] kms_addfb_basic: executing requirem<14>[ 59.190918] [IGT] kms_addfb_basic: starting subtest invalid-set-prop ent: is_intel_device(fd) IGT-Version: 1<14>[ 59.200093] [IGT] kms_addfb_basic: finished subtest invalid-set-prop, SUCCESS .28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305757 for ra<14>[ 59.218574] [IGT] kms_addfb_basic: exiting, ret=0 ndomisat<8>[ 59.224012] ion Opened device: /dev/dri/card0 Starting subtest: invalid-set-prop-any Subtest invalid-set-prop-any: SUCCESS (0.000s) Test requirement not met in function<14>[ 59.245125] [IGT] kms_addfb_basic: executing igt_require_intel, file ../lib/drmtest.<14>[ 59.252878] [IGT] kms_addfb_basic: starting subtest master-rmfb c:880: <14>[ 59.253075] [IGT] kms_addfb_basic: finished subtest master-rmfb, SUCCESS Test requirement<14>[ 59.270875] [IGT] kms_addfb_basic: exiting, ret=0 : is_int<8>[ 59.275701] el_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_de<14>[ 59.294753] [IGT] kms_addfb_basic: executing vice(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:<14>[ 59.304072] [IGT] kms_addfb_basic: starting subtest addfb25-modifier-no-flag 880: Te<14>[ 59.304197] [IGT] kms_addfb_basic: finished subtest addfb25-modifier-no-flag, SUCCESS st requirement: is_intel<14>[ 59.324573] [IGT] kms_addfb_basic: exiting, ret=0 _device(<8>[ 59.329438] fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) <14>[ 59.345577] [IGT] kms_addfb_basic: executing Using IGT_SRANDOM=1706305757 for randomi<14>[ 59.354798] [IGT] kms_addfb_basic: starting subtest addfb25-bad-modifier sation Opened device: /dev/dri/card0 Starting subtest: invalid-set-prop Subtest invalid-set-prop: SUCCESS (0.000s) Test requirement <14>[ 59.371445] [IGT] kms_addfb_basic: finished subtest addfb25-bad-modifier, FAIL not met in function igt_require_intel, file ../l<14>[ 59.387102] [IGT] kms_addfb_basic: exiting, ret=98 ib/drmte<8>[ 59.392353] st.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/dr<14>[ 59.410721] [IGT] kms_addfb_basic: executing mtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305757 for randomisation Opened device: /dev/dri/card0 Starting subtest: master-rmfb Subtest master-rmfb: SUCCESS (0.000s) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305757 for randomisation Opened device: /dev/dri/card0 Starting subtest: addfb25-modifier-no-flag Subtest addfb25-modifier-no-flag: SUCCESS (0.000s) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305757 for randomisation Opened device: /dev/dri/card0 Starting subtest: addfb25-bad-modifier (kms_addfb_basic:374) CRITICAL: Test assertion failure function addfb25_tests, file ../tests/kms_addfb_basic.c:714: (kms_addfb_basic:374) CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0xB8)) << 0) | ((((sizeof(struct drm_mode_fb_cmd2)))) << ((0+8)+8)))), (&f)) == -1 (kms_addfb_basic:374) CRITICAL: error: 0 != -1 Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 [+0xbf3a4358] #2 [+0xbf3a5fbc] #3 [+0xbf3a156c] #4 [__libc_init_first+0x80] #5 [__libc_start_main+0x98] #6 [+0xbf3a15b0] Subtest addfb25-bad-modifier failed. **** DEBUG **** (kms_addfb_basic:374) ioctl_wrappers-DEBUG: Test requirement passed: igt_has_fb_modifiers(fd) (kms_addfb_basic:374) CRITICAL: Test assertion failure function addfb25_tests, file ../tests/kms_addfb_basic.c:714: (kms_addfb_basic:374) CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0xB8)) << 0) | ((((sizeof(struct drm_mode_fb_cmd2)))) << ((0+8)+8)))), (&f)) == -1 (kms_addfb_basic:374) CRITICAL: error: 0 != -1 (kms_addfb_basic:374) igt_core-INFO: Stack trace: (kms_addfb_basic:374) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_addfb_basic:374) igt_core-INFO: #1 [+0xbf3a4358] (kms_addfb_basic:374) igt_core-INFO: #2 [+0xbf3a5fbc] (kms_addfb_basic:374) igt_core-INFO: #3 [+0xbf3a156c] (kms_addfb_basic:374) igt_core-INFO: #4 [__libc_init_first+0x80] (kms_addfb_basic:374) igt_core-INFO: #5 [__libc_start_main+0x98] (kms_addfb_basic:374) igt_core-INFO: #6 [+0xbf3a15b0] **** END **** Subtest addfb25-bad-modifier: FAIL (0.017s) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305757 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Subtest addfb25-x-tiled-mismatch-legacy: SKIP (0.000s) Test requirement not met in function igt_require<14>[ 59.775510] [IGT] kms_addfb_basic: exiting, ret=77 _intel, <8>[ 59.782522] file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_inte<14>[ 59.804231] [IGT] kms_addfb_basic: executing l_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305757 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function igt_require_intel, <14>[ 59.829550] [IGT] kms_addfb_basic: exiting, ret=77 file ../<8>[ 59.834420] lib/drmtest.c:880: Test requirement: is_intel_device(fd) Subtest addfb25-x-tiled-legacy: SKIP (0.000s) Test requirement not met in function igt_requi<14>[ 59.856825] [IGT] kms_addfb_basic: executing re_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20<14>[ 59.886933] [IGT] kms_addfb_basic: exiting, ret=77 aarch64<8>[ 59.892698] ) Using IGT_SRANDOM=1706305757 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function igt_require_intel, file ../lib/dr<14>[ 59.913092] [IGT] kms_addfb_basic: executing mtest.c:880: Test requirement: is_intel_device(fd) Subtest addfb25-framebuffer-vs-set-tiling: SKIP (0.000s) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirem<14>[ 59.938704] [IGT] kms_addfb_basic: exiting, ret=77 ent: is_<8>[ 59.943604] intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: <14>[ 59.960176] [IGT] kms_addfb_basic: executing is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305757 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function igt_<14>[ 59.985801] [IGT] kms_addfb_basic: exiting, ret=77 require_<8>[ 59.990643] intel, file ../lib/drmtest.c:880: Test requirement: is_intel_de<14>[ 60.006337] [IGT] kms_addfb_basic: executing vice(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Subtest basic-x-tiled-legacy: SKIP (0.000s) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Te<14>[ 60.031736] [IGT] kms_addfb_basic: exiting, ret=77 st requi<8>[ 60.036683] rement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux<14>[ 60.052329] [IGT] kms_addfb_basic: executing : 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305758 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_<14>[ 60.077618] [IGT] kms_addfb_basic: exiting, ret=77 intel_de<8>[ 60.082466] vice(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel<14>[ 60.102292] [IGT] kms_addfb_basic: executing _device(fd) Subtest framebuffer-vs-set-tiling: SKIP (0.000s) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch<14>[ 60.128483] [IGT] kms_addfb_basic: starting subtest size-max 64) Usi<14>[ 60.128599] [IGT] kms_addfb_basic: finished subtest size-max, SUCCESS ng IGT_S<14>[ 60.128752] [IGT] kms_addfb_basic: exiting, ret=0 RANDOM=1<8>[ 60.133450] 70630575<14>[ 60.158956] [IGT] kms_addfb_basic: executing 8 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test <14>[ 60.185183] [IGT] kms_addfb_basic: starting subtest too-wide requirem<14>[ 60.185284] [IGT] kms_addfb_basic: finished subtest too-wide, SUCCESS ent: is_<14>[ 60.185434] [IGT] kms_addfb_basic: exiting, ret=0 intel_de<8>[ 60.190525] vice(fd) Su<14>[ 60.214514] [IGT] kms_addfb_basic: executing btest tile-pitch-mismatch: SKIP (0.000s) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=17<14>[ 60.240853] [IGT] kms_addfb_basic: starting subtest too-high 06305758<14>[ 60.240982] [IGT] kms_addfb_basic: finished subtest too-high, SUCCESS for ran<14>[ 60.241132] [IGT] kms_addfb_basic: exiting, ret=0 domisati<8>[ 60.246275] on Opened devic<14>[ 60.270772] [IGT] kms_addfb_basic: executing e: /dev/dri/card0 Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Subtest basic-y-tiled-legacy: SKIP <14>[ 60.300664] [IGT] kms_addfb_basic: starting subtest bo-too-small (0.000s)<14>[ 60.300786] [IGT] kms_addfb_basic: finished subtest bo-too-small, SUCCESS  Te<14>[ 60.300963] [IGT] kms_addfb_basic: exiting, ret=0 st requi<8>[ 60.307019] rement not met in function igt_require_intel, fi<14>[ 60.331581] [IGT] kms_addfb_basic: executing le ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305758 for randomisation Opened device: /dev/dri/card0 Test <14>[ 60.357999] [IGT] kms_addfb_basic: starting subtest small-bo requirem<14>[ 60.358107] [IGT] kms_addfb_basic: finished subtest small-bo, SUCCESS ent not <14>[ 60.358257] [IGT] kms_addfb_basic: exiting, ret=0 met in f<8>[ 60.363343] unction <14>[ 60.387185] [IGT] kms_addfb_basic: executing igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Starting subtest: size-max Subtest size-max: SUCCESS (0.000s) Test requirement not met in fun<14>[ 60.417798] [IGT] kms_addfb_basic: starting subtest bo-too-small-due-to-tiling ction ig<14>[ 60.417898] [IGT] kms_addfb_basic: finished subtest bo-too-small-due-to-tiling, SKIP t_requir<14>[ 60.418033] [IGT] kms_addfb_basic: exiting, ret=77 e_intel,<8>[ 60.422704] file ../lib/drmtest.c:880: Test requirement: i<14>[ 60.451524] [IGT] kms_addfb_basic: executing s_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305758 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function igt_require_i<14>[ 60.478824] [IGT] kms_addfb_basic: exiting, ret=77 ntel, fi<8>[ 60.484064] le ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_requir<14>[ 60.502821] [IGT] kms_addfb_basic: executing e_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Starting subtest: too-wide Subtest too-wide: SUCCESS (0.000s) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_devic<14>[ 60.528500] [IGT] kms_addfb_basic: exiting, ret=77 e(fd) I<8>[ 60.533211] GT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64)<14>[ 60.550829] [IGT] kms_addfb_basic: executing Using IGT_SRANDOM=1706305758 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file<14>[ 60.576428] [IGT] kms_addfb_basic: exiting, ret=77 ../lib/<8>[ 60.581150] drmtest.c:880: Test requirement: is_intel_device(fd) Starting <14>[ 60.598912] [IGT] kms_addfb_basic: executing subtest: too-high Subtest too-high: SUCCESS (0.000s) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305758 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Starting subtest: bo-too-small Subtest bo-too-small: SUCCESS (0.000s) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305758 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Starting subtest: small-bo Subtest small-bo: SUCCESS (0.000s) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305758 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Starting subtest: bo-too-small-due-to-tiling Test requirement not met in function igt_require_i915, file ../lib/drmtest.c:885: Test requirement: is_i915_device(fd) Subtest bo-too-small-due-to-tiling: SKIP (0.000s) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305758 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Subtest addfb25-y-tiled-legacy: SKIP (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305758 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Subtest addfb25-yf-tiled-legacy: SKIP (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305758 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Subtest addfb25-y-tiled-small-legacy: SKIP (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305758 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function igt_require_intel, file ../lib/drmtest.<14>[ 60.963918] [IGT] kms_addfb_basic: exiting, ret=77 c:880: <8>[ 60.970804] Test req<8>[ 60.973493] uirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not m<8>[ 60.998808] et in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Subtest addfb25-4-tiled: SKIP (0.000s) IGT-Version: 1.2<14>[ 61.017992] [IGT] kms_atomic: executing 8-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305759 for randomisation Opened device: /dev/dri/card0<14>[ 61.032703] [IGT] kms_atomic: starting subtest plane-overlay-legacy Starti<14>[ 61.033099] [IGT] kms_atomic: starting dynamic subtest pipe-A-Writeback-1 ng subtest: plane-overlay-legacy Starting dynamic subtest: pipe-A-Writeback-1 Dynamic subtest pipe-A-Write<14>[ 61.252388] [IGT] kms_atomic: finished subtest pipe-A-Writeback-1, SUCCESS back-1: <14>[ 61.252455] [IGT] kms_atomic: finished subtest plane-overlay-legacy, SUCCESS SUCCESS <14>[ 61.252606] [IGT] kms_atomic: exiting, ret=0 (0.219s)<8>[ 61.259498]  Subtest plane-overlay-legacy: <14>[ 61.284635] [IGT] kms_atomic: executing SUCCESS (0.220s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 a<14>[ 61.299142] [IGT] kms_atomic: starting subtest plane-primary-legacy <14>[ 61.299602] [IGT] kms_atomic: starting dynamic subtest pipe-A-Writeback-1 arch64) Using IGT_SRANDOM=1706305759 for randomisation Opened device: /dev/dri/card0 Starting subtest: plane-primary-legacy Starting dynamic subtest: pipe-A-Writeback-1 (kms_atomic:434) igt_kms-CRITICAL: Test assertio<3>[ 61.459416] [drm:vc4_bo_create [vc4]] *ERROR* Failed to allocate from CMA: n failur<6>[ 61.459470] vc4-drm gpu: [drm] dumb: 34560kb BOs (1) e function kmstest_dumb_create, file ../lib/igt_kms.c:1295: (kms_atomic:434) igt_kms-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0xB2)) << 0) | ((((sizeof(struct drm_mode_create_dumb)))) << ((0+8)+8)))), (&create)) == 0 (kms_atomic:434) igt_kms-CRITICAL: Last errno: 12, Cannot allocate memory (kms_atomic:434) igt_kms-CRITICAL: error: -1 != 0 Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:1297 kmstest_dumb_create() #2 ../lib/igt_fb.c:1249 create_bo_for_fb.isra.0() #3 ../lib/igt_fb.c:2112 igt_create_fb_with_bo_size() #4 ../lib/igt_fb.c:2155 igt_create_fb() #5 ../lib/igt_fb.c:2268 igt_create_color_pattern_fb() #6 [+0xae7b5cd0] #7 [+0xae7b24b8] #8 [__libc_init_first+0x80] #9 [__libc_start_main+0x98] #10 [+0xae7b24f0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** (kms_atomic:434) igt_kms-DEBUG: plane A.11: Setting property "CRTC_H" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.11: Setting property "FB_ID" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.11: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.11: Setting property "rotation" to 0x1/1 (kms_atomic:434) igt_kms-DEBUG: plane A.11: Setting property "alpha" to 0xffff/65535 (kms_atomic:434) igt_kms-DEBUG: display: populating plane data: A.12, fb 0 (kms_atomic:434) igt_kms-DEBUG: plane A.12: Setting property "SRC_X" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.12: Setting property "SRC_Y" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.12: Setting property "SRC_W" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.12: Setting property "SRC_H" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.12: Setting property "CRTC_X" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.12: Setting property "CRTC_Y" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.12: Setting property "CRTC_W" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.12: Setting property "CRTC_H" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.12: Setting property "FB_ID" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.12: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.12: Setting property "rotation" to 0x1/1 (kms_atomic:434) igt_kms-DEBUG: plane A.12: Setting property "alpha" to 0xffff/65535 (kms_atomic:434) igt_kms-DEBUG: display: populating plane data: A.13, fb 0 (kms_atomic:434) igt_kms-DEBUG: plane A.13: Setting property "SRC_X" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.13: Setting property "SRC_Y" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.13: Setting property "SRC_W" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.13: Setting property "SRC_H" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.13: Setting property "CRTC_X" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.13: Setting property "CRTC_Y" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.13: Setting property "CRTC_W" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.13: Setting property "CRTC_H" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.13: Setting property "FB_ID" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.13: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.13: Setting property "rotation" to 0x1/1 (kms_atomic:434) igt_kms-DEBUG: plane A.13: Setting property "alpha" to 0xffff/65535 (kms_atomic:434) igt_kms-DEBUG: display: populating plane data: A.14, fb 0 (kms_atomic:434) igt_kms-DEBUG: plane A.14: Setting property "SRC_X" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.14: Setting property "SRC_Y" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.14: Setting property "SRC_W" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.14: Setting property "SRC_H" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.14: Setting property "CRTC_X" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.14: Setting property "CRTC_Y" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.14: Setting property "CRTC_W" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.14: Setting property "CRTC_H" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.14: Setting property "FB_ID" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.14: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.14: Setting property "rotation" to 0x1/1 (kms_atomic:434) igt_kms-DEBUG: plane A.14: Setting property "alpha" to 0xffff/65535 (kms_atomic:434) igt_kms-DEBUG: display: populating plane data: A.15, fb 0 (kms_atomic:434) igt_kms-DEBUG: plane A.15: Setting property "SRC_X" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.15: Setting property "SRC_Y" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.15: Setting property "SRC_W" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.15: Setting property "SRC_H" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.15: Setting property "CRTC_X" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.15: Setting property "CRTC_Y" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.15: Setting property "CRTC_W" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.15: Setting property "CRTC_H" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.15: Setting property "FB_ID" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.15: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.15: Setting property "rotation" to 0x1/1 (kms_atomic:434) igt_kms-DEBUG: plane A.15: Setting property "alpha" to 0xffff/65535 (kms_atomic:434) igt_kms-DEBUG: display: populating plane data: A.16, fb 0 (kms_atomic:434) igt_kms-DEBUG: plane A.16: Setting property "SRC_X" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.16: Setting property "SRC_Y" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.16: Setting property "SRC_W" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.16: Setting property "SRC_H" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.16: Setting property "CRTC_X" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.16: Setting property "CRTC_Y" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.16: Setting property "CRTC_W" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.16: Setting property "CRTC_H" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.16: Setting property "FB_ID" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.16: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.16: Setting property "rotation" to 0x1/1 (kms_atomic:434) igt_kms-DEBUG: plane A.16: Setting property "alpha" to 0xffff/65535 (kms_atomic:434) igt_kms-DEBUG: display: populating plane data: A.17, fb 0 (kms_atomic:434) igt_kms-DEBUG: plane A.17: Setting property "SRC_X" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.17: Setting property "SRC_Y" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.17: Setting property "SRC_W" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.17: Setting property "SRC_H" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.17: Setting property "CRTC_X" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.17: Setting property "CRTC_Y" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.17: Setting property "CRTC_W" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.17: Setting property "CRTC_H" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.17: Setting property "FB_ID" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.17: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.17: Setting property "rotation" to 0x1/1 (kms_atomic:434) igt_kms-DEBUG: plane A.17: Setting property "alpha" to 0xffff/65535 (kms_atomic:434) igt_kms-DEBUG: Pipe B: Setting property "MODE_ID" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: Pipe B: Setting property "ACTIVE" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: display: populating plane data: B.0, fb 0 (kms_atomic:434) igt_kms-DEBUG: plane B.0: Setting property "SRC_X" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane B.0: Setting property "SRC_Y" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane B.0: Setting property "SRC_W" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane B.0: Setting property "SRC_H" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane B.0: Setting property "CRTC_X" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane B.0: Setting property "CRTC_Y" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane B.0: Setting property "CRTC_W" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane B.0: Setting property "CRTC_H" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane B.0: Setting property "FB_ID" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane B.0: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane B.0: Setting property "rotation" to 0x1/1 (kms_atomic:434) igt_kms-DEBUG: plane B.0: Setting property "alpha" to 0xffff/65535 (kms_atomic:434) igt_kms-DEBUG: display: populating plane data: B.17, fb 0 (kms_atomic:434) igt_kms-DEBUG: plane B.17: Setting property "SRC_X" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane B.17: Setting property "SRC_Y" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane B.17: Setting property "SRC_W" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane B.17: Setting property "SRC_H" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane B.17: Setting property "CRTC_X" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane B.17: Setting property "CRTC_Y" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane B.17: Setting property "CRTC_W" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane B.17: Setting property "CRTC_H" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane B.17: Setting property "FB_ID" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane B.17: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane B.17: Setting property "rotation" to 0x1/1 (kms_atomic:434) igt_kms-DEBUG: plane B.17: Setting property "alpha" to 0xffff/65535 (kms_atomic:434) igt_kms-DEBUG: Pipe C: Setting property "MODE_ID" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: Pipe C: Setting property "ACTIVE" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: display: populating plane data: C.0, fb 0 (kms_atomic:434) igt_kms-DEBUG: plane C.0: Setting property "SRC_X" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane C.0: Setting property "SRC_Y" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane C.0: Setting property "SRC_W" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane C.0: Setting property "SRC_H" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane C.0: Setting property "CRTC_X" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane C.0: Setting property "CRTC_Y" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane C.0: Setting property "CRTC_W" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane C.0: Setting property "CRTC_H" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane C.0: Setting property "FB_ID" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane C.0: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane C.0: Setting property "rotation" to 0x1/1 (kms_atomic:434) igt_kms-DEBUG: plane C.0: Setting property "alpha" to 0xffff/65535 (kms_atomic:434) igt_kms-DEBUG: display: populating plane data: C.17, fb 0 (kms_atomic:434) igt_kms-DEBUG: plane C.17: Setting property "SRC_X" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane C.17: Setting property "SRC_Y" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane C.17: Setting property "SRC_W" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane C.17: Setting property "SRC_H" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane C.17: Setting property "CRTC_X" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane C.17: Setting property "CRTC_Y" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane C.17: Setting property "CRTC_W" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane C.17: Setting property "CRTC_H" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane C.17: Setting property "FB_ID" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane C.17: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane C.17: Setting property "rotation" to 0x1/1 (kms_atomic:434) igt_kms-DEBUG: plane C.17: Setting property "alpha" to 0xffff/65535 (kms_atomic:434) igt_kms-DEBUG: Pipe D: Setting property "MODE_ID" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: Pipe D: Setting property "ACTIVE" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: display: populating plane data: D.0, fb 0 (kms_atomic:434) igt_kms-DEBUG: plane D.0: Setting property "SRC_X" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane D.0: Setting property "SRC_Y" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane D.0: Setting property "SRC_W" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane D.0: Setting property "SRC_H" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane D.0: Setting property "CRTC_X" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane D.0: Setting property "CRTC_Y" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane D.0: Setting property "CRTC_W" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane D.0: Setting property "CRTC_H" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane D.0: Setting property "FB_ID" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane D.0: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane D.0: Setting property "rotation" to 0x1/1 (kms_atomic:434) igt_kms-DEBUG: plane D.0: Setting property "alpha" to 0xffff/65535 (kms_atomic:434) igt_kms-DEBUG: display: populating plane data: D.17, fb 0 (kms_atomic:434) igt_kms-DEBUG: plane D.17: Setting property "SRC_X" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane D.17: Setting property "SRC_Y" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane D.17: Setting property "SRC_W" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane D.17: Setting property "SRC_H" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane D.17: Setting property "CRTC_X" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane D.17: Setting property "CRTC_Y" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane D.17: Setting property "CRTC_W" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane D.17: Setting property "CRTC_H" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane D.17: Setting property "FB_ID" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane D.17: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane D.17: Setting property "rotation" to 0x1/1 (kms_atomic:434) igt_kms-DEBUG: plane D.17: Setting property "alpha" to 0xffff/65535 (kms_atomic:434) igt_kms-DEBUG: Pipe E: Setting property "MODE_ID" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: Pipe E: Setting property "ACTIVE" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: display: populating plane data: E.0, fb 0 (kms_atomic:434) igt_kms-DEBUG: plane E.0: Setting property "SRC_X" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane E.0: Setting property "SRC_Y" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane E.0: Setting property "SRC_W" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane E.0: Setting property "SRC_H" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane E.0: Setting property "CRTC_X" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane E.0: Setting property "CRTC_Y" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane E.0: Setting property "CRTC_W" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane E.0: Setting property "CRTC_H" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane E.0: Setting property "FB_ID" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane E.0: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane E.0: Setting property "rotation" to 0x1/1 (kms_atomic:434) igt_kms-DEBUG: plane E.0: Setting property "alpha" to 0xffff/65535 (km<14>[ 62.841249] [IGT] kms_atomic: finished subtest pipe-A-Writeback-1, FAIL s_atomic<14>[ 62.841387] [IGT] kms_atomic: finished subtest plane-primary-legacy, FAIL :434) ig<14>[ 62.841827] [IGT] kms_atomic: exiting, ret=98 t_kms-DE<8>[ 62.851544] BUG: display: populating plane data:<14>[ 62.874315] [IGT] kms_atomic: executing E.17, fb 0 (kms_atomic:434) igt_kms-DEBUG: plane E.17: Setting property "SRC_X" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plan<14>[ 62.889841] [IGT] kms_atomic: starting subtest plane-primary-overlay-mutable-zpos e E.17: Setting property "SRC_Y" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane E.17: Setting property "SRC_W" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane E.17: Setting property "SRC_H" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane E.17: Setting property "CRTC_X" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane E.17: Setting property "CRTC_Y" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane E.17: Setting property "CRTC_W" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane E.17: Setting property "CRTC_H" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane E.17: Setting property "FB_ID" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane E.17: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane E.17: Setting property "rotation" to 0x1/1 (kms_atomic:434) igt_kms-DEBUG: plane E.17: Setting property "alpha" to 0xffff/65535 (kms_atomic:434) igt_kms-DEBUG: display: HDMI-A-1: preparing atomic, pipe: None (kms_atomic:434) igt_kms-DEBUG: HDMI-A-1: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: display: HDMI-A-2: preparing atomic, pipe: None (kms_atomic:434) igt_kms-DEBUG: HDMI-A-2: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: display: Writeback-1: preparing atomic, pipe: A (kms_atomic:434) igt_kms-DEBUG: Writeback-1: Setting property "CRTC_ID" to 0x31/49 (kms_atomic:434) igt_kms-DEBUG: Writeback-1: Setting property "WRITEBACK_FB_ID" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: display: } (kms_atomic:434) igt_fb-DEBUG: igt_create_fb_with_bo_size(width=<14>[ 63.034695] [IGT] kms_atomic: finished subtest plane-primary-overlay-mutable-zpos, SKIP 4096, he<14>[ 63.034954] [IGT] kms_atomic: exiting, ret=77 ight=216<8>[ 63.041468] 0, format=XR24(0x34325258), modifier=0x0, size=0) (kms_atomic:434) igt_kms-CRITICAL: Test asser<14>[ 63.064687] [IGT] kms_atomic: executing tion failure function kmstest_dumb_create, file ../lib/igt_kms.c:1295: (kms_atomic:434) igt_kms-CRITICAL: Failed assertion: igt_ioctl((<14>[ 63.079923] [IGT] kms_atomic: starting subtest plane-immutable-zpos fd), (((<14>[ 63.080303] [IGT] kms_atomic: starting dynamic subtest pipe-A-Writeback-1 (2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0xB2)) << 0) | ((((sizeof(struct drm_mode_create_dumb)))) << ((0+8)+8)))), (&create)) == 0 (kms_atomic:434) igt_kms-CRITICAL: Last errno: 12, Cannot allocate memory (kms_atomic:434) igt_kms-CRITICAL: error: -1 != 0 (kms_atomic:434) igt_core-INFO: Stack trace: (kms_atomic:434) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_atomic:434) igt_core-INFO: #1 ../lib/igt_kms.c:1297 kmstest_dumb_create() (kms_atomic:434) igt_core-INFO: #2 ../lib/igt_fb.c:1249 create_bo_for_fb.isra.0() (kms_atomic:434) igt_core-INFO: #3 ../lib/igt_fb.c:2112 igt_create_fb_with_bo_size() (kms_atomic:434) igt_core-INFO: #4 ../lib/igt_fb.c:2155 igt_create_fb() (kms_atomic:434) igt_core-INFO: #5 ../lib/igt_fb.c:2268 igt_create_color_pattern_fb() (kms_atomic:434) igt_core-INFO: #6 [+0xae7b5cd0] (kms_atomic:434) igt_core-INFO: #7 [+0xae7b24b8] (kms_atomic:434) igt_core-INFO: #8 [__libc_init_first+0x80] (kms_atomic:434) igt_core-INFO: #9 [__libc_start_main+0x98] (kms_atomic:434) igt_core-INFO: #10 [+0xae7b24f0] **** END **** Dynamic subtest pipe-A-Writeback-1: FAIL (1.527s) Subtest plane-primary-legacy: FAIL (1.542s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305760 for randomisation Opened device: /dev/dri/card0 Starting subtest: plane-primary-overlay-mutabl<14>[ 63.224242] [IGT] kms_atomic: finished subtest pipe-A-Writeback-1, SKIP e-zpos <14>[ 63.224314] [IGT] kms_atomic: finished subtest plane-immutable-zpos, SKIP No dynam<14>[ 63.224532] [IGT] kms_atomic: exiting, ret=77 ic tests<8>[ 63.231652] executed. Subtest plane-primary-overlay-mu<14>[ 63.256285] [IGT] kms_atomic: executing table-zpos: SKIP (0.145s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706<14>[ 63.271445] [IGT] kms_atomic: starting subtest test-only 305761 for randomisation Opened device: /dev/dri/card0 Starting subtest: plane-immutable-zpos Starting dynamic subtest: pipe-A-Writeback-1 Test requirement not met in function igt_require_pipe_crc, file ../lib/igt_pipe_crc.c:211: Test requirement: fstatat(dir, "crtc-0/crc/control", &stat, 0) == 0 CRCs not supported on this platform Last errno: 2, No such file or directory Dynamic subtest pipe-A-Writeback-1: SKIP (0.144s) No dynamic tests executed. Subtest plane-immutable-zpos: SKIP (0.144s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305761 for randomisation Opened device: /dev/dri/card0 Starting subtest: test-only Starting dynamic subtest: pipe-A-Writeba<14>[ 63.415957] [IGT] kms_atomic: starting dynamic subtest pipe-A-Writeback-1 ck-1 Dynamic subtest pipe<14>[ 63.545526] [IGT] kms_atomic: finished subtest pipe-A-Writeback-1, SUCCESS -A-Write<14>[ 63.545593] [IGT] kms_atomic: finished subtest test-only, SUCCESS back-1: <14>[ 63.545742] [IGT] kms_atomic: exiting, ret=0 SUCCESS <8>[ 63.552575] (0.129s) Subtest test-only: SUCCESS (0.274s)[0<14>[ 63.576747] [IGT] kms_atomic: executing m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_<14>[ 63.591271] [IGT] kms_atomic: starting subtest plane-cursor-legacy SRANDOM=17063057<14>[ 63.598962] [IGT] kms_atomic: starting dynamic subtest pipe-A-Writeback-1 61 for randomisation Opened device: /dev/dri/card0 Starting subtest: plane-cursor-legacy Starting dynamic subtest: pipe-A-Writeback-1 Dynamic subtest pipe-A-Write<14>[ 63.745077] [IGT] kms_atomic: finished subtest pipe-A-Writeback-1, SUCCESS back-1: <14>[ 63.745142] [IGT] kms_atomic: finished subtest plane-cursor-legacy, SUCCESS SUCCESS <14>[ 63.745277] [IGT] kms_atomic: exiting, ret=0 (0.146s)<8>[ 63.752317]  Subtest plane-cursor-l<14>[ 63.777166] [IGT] kms_atomic: executing egacy: SUCCESS (0.147s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305761 for<14>[ 63.791925] [IGT] kms_atomic: starting subtest plane-invalid-params randomi<14>[ 63.792327] [IGT] kms_atomic: starting dynamic subtest pipe-A-Writeback-1 sation Opened device: /dev/dri/card0 Starting subtest: plane-invalid-params Starting dynamic subtest: pipe-A-Writeback-1 (kms_atomic:449)<3>[ 63.941939] [drm:vc4_bo_create [vc4]] *ERROR* Failed to allocate from CMA: igt_kms<6>[ 63.941993] vc4-drm gpu: [drm] dumb: 34560kb BOs (1) -CRITICAL: Test assertion failure function kmstest_dumb_create, file ../lib/igt_kms.c:1295: (kms_atomic:449) igt_kms-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0xB2)) << 0) | ((((sizeof(struct drm_mode_create_dumb)))) << ((0+8)+8)))), (&create)) == 0 (kms_atomic:449) igt_kms-CRITICAL: Last errno: 12, Cannot allocate memory (kms_atomic:449) igt_kms-CRITICAL: error: -1 != 0 Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:1297 kmstest_dumb_create() #2 ../lib/igt_fb.c:1249 create_bo_for_fb.isra.0() #3 ../lib/igt_fb.c:2112 igt_create_fb_with_bo_size() #4 ../lib/igt_fb.c:2155 igt_create_fb() #5 ../lib/igt_fb.c:2226 igt_create_pattern_fb() #6 [+0xb83954dc] #7 [+0xb83924b8] #8 [__libc_init_first+0x80] #9 [__libc_start_main+0x98] #10 [+0xb83924f0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** (kms_atomic:449) igt_kms-DEBUG: plane B.17: Setting property "alpha" to 0xffff/65535 (kms_atomic:449) igt_kms-DEBUG: Pipe C: Setting property "MODE_ID" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: Pipe C: Setting property "ACTIVE" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: display: populating plane data: C.0, fb 0 (kms_atomic:449) igt_kms-DEBUG: plane C.0: Setting property "SRC_X" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane C.0: Setting property "SRC_Y" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane C.0: Setting property "SRC_W" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane C.0: Setting property "SRC_H" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane C.0: Setting property "CRTC_X" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane C.0: Setting property "CRTC_Y" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane C.0: Setting property "CRTC_W" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane C.0: Setting property "CRTC_H" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane C.0: Setting property "FB_ID" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane C.0: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane C.0: Setting property "rotation" to 0x1/1 (kms_atomic:449) igt_kms-DEBUG: plane C.0: Setting property "alpha" to 0xffff/65535 (kms_atomic:449) igt_kms-DEBUG: display: populating plane data: C.17, fb 0 (kms_atomic:449) igt_kms-DEBUG: plane C.17: Setting property "SRC_X" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane C.17: Setting property "SRC_Y" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane C.17: Setting property "SRC_W" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane C.17: Setting property "SRC_H" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane C.17: Setting property "CRTC_X" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane C.17: Setting property "CRTC_Y" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane C.17: Setting property "CRTC_W" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane C.17: Setting property "CRTC_H" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane C.17: Setting property "FB_ID" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane C.17: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane C.17: Setting property "rotation" to 0x1/1 (kms_atomic:449) igt_kms-DEBUG: plane C.17: Setting property "alpha" to 0xffff/65535 (kms_atomic:449) igt_kms-DEBUG: Pipe D: Setting property "MODE_ID" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: Pipe D: Setting property "ACTIVE" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: display: populating plane data: D.0, fb 0 (kms_atomic:449) igt_kms-DEBUG: plane D.0: Setting property "SRC_X" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane D.0: Setting property "SRC_Y" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane D.0: Setting property "SRC_W" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane D.0: Setting property "SRC_H" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane D.0: Setting property "CRTC_X" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane D.0: Setting property "CRTC_Y" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane D.0: Setting property "CRTC_W" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane D.0: Setting property "CRTC_H" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane D.0: Setting property "FB_ID" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane D.0: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane D.0: Setting property "rotation" to 0x1/1 (kms_atomic:449) igt_kms-DEBUG: plane D.0: Setting property "alpha" to 0xffff/65535 (kms_atomic:449) igt_kms-DEBUG: display: populating plane data: D.17, fb 0 (kms_atomic:449) igt_kms-DEBUG: plane D.17: Setting property "SRC_X" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane D.17: Setting property "SRC_Y" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane D.17: Setting property "SRC_W" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane D.17: Setting property "SRC_H" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane D.17: Setting property "CRTC_X" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane D.17: Setting property "CRTC_Y" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane D.17: Setting property "CRTC_W" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane D.17: Setting property "CRTC_H" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane D.17: Setting property "FB_ID" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane D.17: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane D.17: Setting property "rotation" to 0x1/1 (kms_atomic:449) igt_kms-DEBUG: plane D.17: Setting property "alpha" to 0xffff/65535 (kms_atomic:449) igt_kms-DEBUG: Pipe E: Setting property "MODE_ID" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: Pipe E: Setting property "ACTIVE" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: display: populating plane data: E.0, fb 0 (kms_atomic:449) igt_kms-DEBUG: plane E.0: Setting property "SRC_X" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane E.0: Setting property "SRC_Y" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane E.0: Setting property "SRC_W" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane E.0: Setting property "SRC_H" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane E.0: Setting property "CRTC_X" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane E.0: Setting property "CRTC_Y" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane E.0: Setting property "CRTC_W" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane E.0: Setting property "CRTC_H" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane E.0: Setting property "FB_ID" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane E.0: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane E.0: Setting property "rotation" to 0x1/1 (kms_atomic:449) igt_kms-DEBUG: plane E.0: Setting property "alpha" to 0xffff/65535 (kms_atomic:449) igt_kms-DEBUG: display: populating plane data: E.17, fb 0 (kms_atomic:449) igt_kms-DEBUG: plane E.17: Setting property "SRC_X" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane E.17: Setting property "SRC_Y" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane E.17: Setting property "SRC_W" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane E.17: Setting property "SRC_H" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane E.17: Setting property "CRTC_X" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane E.17: Setting property "CRTC_Y" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane E.17: Setting property "CRTC_W" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane E.17: Setting property "CRTC_H" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane E.17: Setting property "FB_ID" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane E.17: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane E.17: Setting property "rotation" to 0x1/1 (kms_atomic:449) igt_kms-DEBUG: plane E.17: Setting property "alpha" to 0xffff/65535 (kms_atomic:449) igt_kms-DEBUG: display: HDMI-A-1: preparing atomic, pipe: None (kms_atomic:449) igt_kms-DEBUG: HDMI-A-1: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: display: HDMI-A-2: preparing atomic, pipe: None (kms_atomic:449) igt_kms-DEBUG: HDMI-A-2: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: display: Writeback-1: preparing atomic, pipe: A (kms_atomic:449) igt_kms-DEBUG: Writeback-1: Setting property "CRTC_ID" to 0x31/49 (kms_atomic:449) igt_kms-DEBUG: Writeback-1: Setting property "WRITEBACK_FB_ID" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: display: } (kms_atomic:449) igt_kms-DEBUG: display: commit { (kms_atomic:449) igt_kms-DEBUG: display: populating plane data: A.0, fb 45 (kms_atomic:449) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x2d/45 (kms_atomic:449) igt_kms-DEBUG: display: } (kms_atomic:449) igt_kms-DEBUG: display: commit { (kms_atomic:449) igt_kms-DEBUG: display: populating plane data: A.0, fb 49 (kms_atomic:449) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x31/49 (kms_atomic:449) igt_kms-DEBUG: display: } (kms_atomic:449) igt_kms-DEBUG: display: commit { (kms_atomic:449) igt_kms-DEBUG: display: populating plane data: A.0, fb 44 (kms_atomic:449) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x2c/44 (kms_atomic:449) igt_kms-DEBUG: display: } (kms_atomic:449) igt_kms-DEBUG: display: commit { (kms_atomic:449) igt_kms-DEBUG: display: populating plane data: A.0, fb 154 (kms_atomic:449) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x9a/154 (kms_atomic:449) igt_kms-DEBUG: display: } (kms_atomic:449) igt_kms-DEBUG: display: commit { (kms_atomic:449) igt_kms-DEBUG: display: populating plane data: A.0, fb 0 (kms_atomic:449) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: display: } (kms_atomic:449) igt_kms-DEBUG: display: A.0: plane_set_fb(155) (kms_atomic:449) igt_kms-DEBUG: display: A.0: plane_set_size (4096x2160) (kms_atomic:449) igt_kms-DEBUG: display: A.0: fb_set_position(0,0) (kms_atomic:449) igt_kms-DEBUG: display: A.0: fb_set_size(4096x2160) (kms_atomic:449) igt_kms-DEBUG: display: commit { (kms_atomic:449) igt_kms-DEBUG: display: populating plane data: A.0, fb 155 (kms_atomic:449) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0x10000000/268435456 (kms_atomic:449) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x8700000/141557760 (kms_atomic:449) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0x1000/4096 (kms_atomic:449) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x870/2160 (kms_atomic:449) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x9b/155 (kms_atomic:449) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x31/49 (kms_atomic:449) igt_kms-DEBUG: display: } (kms_atomic:449) igt_kms-DEBUG: display: commit { (kms_atomic:449) igt_kms-DEBUG: display: populating plane data: A.0, fb 155 (kms_atomic:449) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x2d/45 (kms_atomic:449) igt_kms-DEBUG: display: } (kms_atomic:449) igt_kms-DEBUG: display: commit { (kms_atomic:449) igt_kms-DEBUG: display: populating plane data: A.0, fb 155 (kms_atomic:449) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x9b/155 (kms_atomic:449) igt_kms-DEBUG: display: } (kms_atomic:449) igt_kms-DEBUG: display: commit { (kms_atomic:449) igt_kms-DEBUG: display: populating plane data: A.0, fb 155 (kms_atomic:449) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x2c/44 (kms_atomic:449) igt_kms-DEBUG: display: } (kms_atomic:449) igt_kms-DEBUG: display: commit { (kms_atomic:449) igt_kms-DEBUG: display: populating plane data: A.0, fb 155 (<14>[ 64.986083] [IGT] kms_atomic: finished subtest pipe-A-Writeback-1, FAIL kms_atom<14>[ 64.986217] [IGT] kms_atomic: finished subtest plane-invalid-params, FAIL ic:449) <14>[ 64.987486] [IGT] kms_atomic: exiting, ret=98 igt_kms-DEBUG: plane A.0: Setting proper<8>[ 65.010931] ty "CRTC_ID" to 0x9a/154 (kms_atomic:449) igt_kms-DEBUG: display: } (kms_atomic:449) igt_kms-DEBUG: display: commit { (kms_atomic:449) igt_kms-DEBUG: display: populating plane d<14>[ 65.033768] [IGT] kms_atomic: executing ata: A.0, fb 155 (kms_atomic:449) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: displa<14>[ 65.048733] [IGT] kms_atomic: starting subtest plane-invalid-params-fence y: } (k<14>[ 65.049118] [IGT] kms_atomic: starting dynamic subtest pipe-A-Writeback-1 ms_atomic:449) igt_kms-DEBUG: display: A.0: plane_set_fb(155) (kms_atomic:449) igt_kms-DEBUG: display: A.0: plane_set_size (4096x2160) (kms_atomic:449) igt_kms-DEBUG: display: A.0: fb_set_position(0,0) (kms_atomic:449) igt_kms-DEBUG: display: A.0: fb_set_size(4096x2160) (kms_atomic:449) igt_kms-DEBUG: display: commit { (kms_atomic:449) igt_kms-DEBUG: display: populating plane data: A.0, fb 155 (kms_atomic:449) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x0/0 (kms_atomic:449) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0x10000000/268435456 (kms_atomic:449) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x8700000/141557760 (kms_atomic:449) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0x1000/4096 (kms_atomic:449) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x870/2160 (kms_atomic:449) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x9b/155 (kms_atomic:449) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x31/49 (kms_atomic:449) igt_kms-DEBUG: display: } (kms_atomic:449) igt_fb-DEBUG: igt_create_fb_with_bo_size(width=4095, height=2159, format=XR24(0x34325258), modifier=0x0, size=0) (kms_atomic:449) igt_kms-CRITICAL: Test assertion failure function kmstest_dumb_create, file ../lib/igt_kms.c:1295: (kms_atomic:449) igt_kms-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8<14>[ 65.193828] [IGT] kms_atomic: finished subtest pipe-A-Writeback-1, SKIP )+14)) |<14>[ 65.193897] [IGT] kms_atomic: finished subtest plane-invalid-params-fence, SKIP ((('d')<14>[ 65.194128] [IGT] kms_atomic: exiting, ret=77 ) << (0+<8>[ 65.200149] 8)) | (((0xB2)) <14>[ 65.226179] [IGT] kms_atomic: executing << 0) | ((((sizeof(struct drm_mode_create_dumb)))) << ((0+8)+8)))), (&create)) == 0 (kms_atomic:449) igt_kms-CRITICAL: Last errno: 12, <14>[ 65.240853] [IGT] kms_atomic: starting subtest crtc-invalid-params Cannot a<14>[ 65.241259] [IGT] kms_atomic: starting dynamic subtest pipe-A-Writeback-1 llocate memory (kms_atomic:449) igt_kms-CRITICAL: error: -1 != 0 (kms_atomic:449) igt_core-INFO: Stack trace: (kms_atomic:449) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_atomic:449) igt_core-INFO: #1 ../lib/igt_kms.c:1297 kmstest_dumb_create() (kms_atomic:449) igt_core-INFO: #2 ../lib/igt_fb.c:1249 create_bo_for_fb.isra.0() (kms_atomic:449) igt_core-INFO: #3 ../lib/igt_fb.c:2112 igt_create_fb_with_bo_size() (kms_atomic:449) igt_core-INFO: #4 ../lib/igt_fb.c:2155 igt_create_fb() (kms_atomic:449) igt_core-INFO: #5 ../lib/igt_fb.c:2226 igt_create_pattern_fb() (kms_atomic:449) igt_core-INFO: #6 [+0xb83954dc] (kms_atomic:449) igt_core-INFO: #7 [+0xb83924b8] (kms_atomic:449) igt_core-INFO: #8 [__libc_init_first+0x80] (kms_atomic:449) igt_core-INFO: #9 [__libc_start_main+0x98] (kms_atomic:449) igt_core-INFO: #10 [+0xb83924f0] **** END **** Dynamic subtest pipe-A-Writeback-1: FAIL (1.194s) Subtest plane-invalid-params: FAIL (1.194s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305763 for randomisation Opened device: /dev/dri/card0 Starting subtest: plane-invalid-params-fence Starting dynamic subtest: pipe-A-Writeback-1 Test requirement not met in function igt_require_sw_sync, file ../lib/sw_sync.c:265: Test requirement: kernel_has_sw_sync() Last errno: 2, No such file or directory Dynamic subtest pipe-A-Writeback-1: SKIP (0.145s) No dynamic tests executed<14>[ 65.391608] [IGT] kms_atomic: finished subtest pipe-A-Writeback-1, SUCCESS . S<14>[ 65.391672] [IGT] kms_atomic: finished subtest crtc-invalid-params, SUCCESS ubtest p<14>[ 65.391808] [IGT] kms_atomic: exiting, ret=0 lane-inv<8>[ 65.398635] alid-params-fence: SKIP (0.145s) IGT-Versio<14>[ 65.423623] [IGT] kms_atomic: executing n: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=17063<14>[ 65.439169] [IGT] kms_atomic: starting subtest crtc-invalid-params-fence 05763 fo<14>[ 65.439615] [IGT] kms_atomic: starting dynamic subtest pipe-A-Writeback-1 r randomisation Opened device: /dev/dri/card0 Starting subtest: crtc-invalid-params Starting dynamic subtest: pipe-A-Writeback-1 Dynamic subtest pipe-A-Writeback-1: SUCCESS (0.150s) Subtest crtc-invalid-params: SUCCESS (0.151s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305763 for randomisation Opened device: /dev/dri/card0 Starting subtest: crtc-invalid-params-fence Starting dynamic subtest: pipe-A-Writeback-1 Test req<14>[ 65.599075] [IGT] kms_atomic: finished subtest pipe-A-Writeback-1, SKIP uirement<14>[ 65.599142] [IGT] kms_atomic: finished subtest crtc-invalid-params-fence, SKIP not met<14>[ 65.599441] [IGT] kms_atomic: exiting, ret=77 in func<8>[ 65.620238] tion igt_require_sw_sync, file ../lib/sw_sync.c:265: Test requirement: kernel_has_sw_sync() Last errno: 2, No such fil<14>[ 65.637647] [IGT] kms_atomic: executing e or directory Dynamic subtest pipe-A-Writeback-1: SKIP (0.144s) No dynamic tests executed. Subtest crtc-invalid-<14>[ 65.652739] [IGT] kms_atomic: starting subtest atomic-invalid-params params-f<14>[ 65.653139] [IGT] kms_atomic: starting dynamic subtest pipe-A-Writeback-1 ence: SKIP (0.160s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305763 for randomisation Opened device: /dev/dri/card0 Starting subtest: atomic-invalid-params Starting dynamic subtest: pipe-A-Writeback-1 Dynamic subt<14>[ 65.798171] [IGT] kms_atomic: finished subtest pipe-A-Writeback-1, SUCCESS est pipe<14>[ 65.798236] [IGT] kms_atomic: finished subtest atomic-invalid-params, SUCCESS -A-Write<14>[ 65.798367] [IGT] kms_atomic: exiting, ret=0 back-1: <8>[ 65.804215] SUCCESS (0.145s) Subtes<14>[ 65.829207] [IGT] kms_atomic: executing t atomic-invalid-params: SUCCESS (0.145s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRAN<14>[ 65.843813] [IGT] kms_atomic: starting subtest atomic-plane-damage DOM=1706305763 for randomisation Opened device: /dev/dri/card0 Starting subtest: atomic-plane-damage No dynamic tests<14>[ 65.990137] [IGT] kms_atomic: finished subtest atomic-plane-damage, SKIP execute<14>[ 65.990387] [IGT] kms_atomic: exiting, ret=77 d. <8>[ 65.996767] Subtest <8>[ 65.998890] atomic-plane-damage: SKIP (0.146s) <8>[ 66.023814] IGT-Version: 1.28-ga44ebfe (aarc<14>[ 66.044642] [IGT] kms_flip_event_leak: executing h64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305764 for rand<14>[ 66.059253] [IGT] kms_flip_event_leak: starting subtest basic omisatio<14>[ 66.059539] [IGT] kms_flip_event_leak: starting dynamic subtest pipe-A-Writeback-1 n Opened device: /dev/dri/card0 Starting subtest: basic Starting dynamic subtest: pipe-A-Writeback-1 (kms_flip_event_leak:470) igt_kms-CRITICAL: Test<3>[ 66.087527] [drm:vc4_bo_create [vc4]] *ERROR* Failed to allocate from CMA: asserti<6>[ 66.087568] vc4-drm gpu: [drm] dumb: 34560kb BOs (1) on failure function kmstest_dumb_create, file ../lib/igt_kms.c:1295: (kms_flip_event_leak:470) igt_kms-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0xB2)) << 0) | ((((sizeof(struct drm_mode_create_dumb)))) << ((0+8)+8)))), (&create)) == 0 (kms_flip_event_leak:470) igt_kms-CRITICAL: Last errno: 12, Cannot allocate memory (kms_flip_event_leak:470) igt_kms-CRITICAL: error: -1 != 0 Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:1297 kmstest_dumb_create() #2 ../lib/igt_fb.c:1249 create_bo_for_fb.isra.0() #3 ../lib/igt_fb.c:2112 igt_create_fb_with_bo_size() #4 ../lib/igt_fb.c:2155 igt_create_fb() #5 [+0xb3a51964] #6 [+0xb3a5146c] #7 [__libc_init_first+0x80] #8 [__libc_start_main+0x98] #9 [+0xb3a514b0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** (kms_flip_event_leak:470) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_flip_event_leak:470) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 5 (kms_flip_event_leak:470) igt_kms-DEBUG: display: SetPlane pipe A, plane 5, disabling (kms_flip_event_leak:470) igt_kms-DEBUG: display: SetProp plane A.5 "rotation" to 0x1/1 (kms_flip_event_leak:470) igt_kms-DEBUG: display: SetProp plane A.5 "alpha" to 0xffff/65535 (kms_flip_event_leak:470) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_flip_event_leak:470) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 6 (kms_flip_event_leak:470) igt_kms-DEBUG: display: SetPlane pipe A, plane 6, disabling (kms_flip_event_leak:470) igt_kms-DEBUG: display: SetProp plane A.6 "rotation" to 0x1/1 (kms_flip_event_leak:470) igt_kms-DEBUG: display: SetProp plane A.6 "alpha" to 0xffff/65535 (kms_flip_event_leak:470) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_flip_event_leak:470) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 7 (kms_flip_event_leak:470) igt_kms-DEBUG: display: SetPlane pipe A, plane 7, disabling (kms_flip_event_leak:470) igt_kms-DEBUG: display: SetProp plane A.7 "rotation" to 0x1/1 (kms_flip_event_leak:470) igt_kms-DEBUG: display: SetProp plane A.7 "alpha" to 0xffff/65535 (kms_flip_event_leak:470) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_flip_event_leak:470) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 8 (kms_flip_event_leak:470) igt_kms-DEBUG: display: SetPlane pipe A, plane 8, disabling (kms_flip_event_leak:470) igt_kms-DEBUG: display: SetProp plane A.8 "rotation" to 0x1/1 (kms_flip_event_leak:470) igt_kms-DEBUG: display: SetProp plane A.8 "alpha" to 0xffff/65535 (kms_flip_event_leak:470) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_flip_event_leak:470) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 9 (kms_flip_event_leak:470) igt_kms-DEBUG: display: SetPlane pipe A, plane 9, disabling (kms_flip_event_leak:470) igt_kms-DEBUG: display: SetProp plane A.9 "rotation" to 0x1/1 (kms_flip_event_leak:470) igt_kms-DEBUG: display: SetProp plane A.9 "alpha" to 0xffff/65535 (kms_flip_event_leak:470) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_flip_event_leak:470) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 10 (kms_flip_event_leak:470) igt_kms-DEBUG: display: SetPlane pipe A, plane 10, disabling (kms_flip_event_leak:470) igt_kms-DEBUG: display: SetProp plane A.10 "rotation" to 0x1/1 (kms_flip_event_leak:470) igt_kms-DEBUG: display: SetProp plane A.10 "alpha" to 0xffff/65535 (kms_flip_event_leak:470) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_flip_event_leak:470) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 11 (kms_flip_event_leak:470) igt_kms-DEBUG: display: SetPlane pipe A, plane 11, disabling (kms_flip_event_leak:470) igt_kms-DEBUG: display: SetProp plane A.11 "rotation" to 0x1/1 (kms_flip_event_leak:470) igt_kms-DEBUG: display: SetProp plane A.11 "alpha" to 0xffff/65535 (kms_flip_event_leak:470) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_flip_event_leak:470) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 12 (kms_flip_event_leak:470) igt_kms-DEBUG: display: SetPlane pipe A, plane 12, disabling (kms_flip_event_leak:470) igt_kms-DEBUG: display: SetProp plane A.12 "rotation" to 0x1/1 (kms_flip_event_leak:470) igt_kms-DEBUG: display: SetProp plane A.12 "alpha" to 0xffff/65535 (kms_flip_event_leak:470) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_flip_event_leak:470) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 13 (kms_flip_event_leak:470) igt_kms-DEBUG: display: SetPlane pipe A, plane 13, disabling (kms_flip_event_leak:470) igt_kms-DEBUG: display: SetProp plane A.13 "rotation" to 0x1/1 (kms_flip_event_leak:470) igt_kms-DEBUG: display: SetProp plane A.13 "alpha" to 0xffff/65535 (kms_flip_event_leak:470) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_flip_event_leak:470) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 14 (kms_flip_event_leak:470) igt_kms-DEBUG: display: SetPlane pipe A, plane 14, disabling (kms_flip_event_leak:470) igt_kms-DEBUG: display: SetProp plane A.14 "rotation" to 0x1/1 (kms_flip_event_leak:470) igt_kms-DEBUG: display: SetProp plane A.14 "alpha" to 0xffff/65535 (kms_flip_event_leak:470) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_flip_event_leak:470) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 15 (kms_flip_event_leak:470) igt_kms-DEBUG: display: SetPlane pipe A, plane 15, disabling (kms_flip_event_leak:470) igt_kms-DEBUG: display: SetProp plane A.15 "rotation" to 0x1/1 (kms_flip_event_leak:470) igt_kms-DEBUG: display: SetProp plane A.15 "alpha" to 0xffff/65535 (kms_flip_event_leak:470) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_flip_event_leak:470) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 16 (kms_flip_event_leak:470) igt_kms-DEBUG: display: SetPlane pipe A, plane 16, disabling (kms_flip_event_leak:470) igt_kms-DEBUG: display: SetProp plane A.16 "rotation" to 0x1/1 (kms_flip_event_leak:470) igt_kms-DEBUG: display: SetProp plane A.16 "alpha" to 0xffff/65535 (kms_flip_event_leak:470) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_flip_event_leak:470) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 17 (kms_flip_event_leak:470) igt_kms-DEBUG: display: SetCursor pipe A, disabling (kms_flip_event_leak:470) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0) (kms_flip_event_leak:470) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_flip_event_leak:470) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 0 (kms_flip_event_leak:470) igt_kms-DEBUG: display: SetCrtc pipe B, disabling (kms_flip_event_leak:470) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_flip_event_leak:470) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 17 (kms_flip_event_leak:470) igt_kms-DEBUG: display: SetCursor pipe B, disabling (kms_flip_event_leak:470) igt_kms-DEBUG: display: MoveCur<14>[ 66.796254] [IGT] kms_flip_event_leak: finished subtest pipe-A-Writeback-1, FAIL sor pipe<14>[ 66.796397] [IGT] kms_flip_event_leak: finished subtest basic, FAIL B, (0, <14>[ 66.797432] [IGT] kms_flip_event_leak: exiting, ret=98 0) (kms<8>[ 66.802845] _flip_ev<8>[ 66.804351] ent_leak<8>[ 66.827470] :470) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_flip_event_leak:470) igt_kms-DEBUG: display: <14>[ 66.848120] [IGT] kms_prop_blob: executing Fixing<14>[ 66.848524] [IGT] kms_prop_blob: starting subtest basic up init<14>[ 66.848613] [IGT] kms_prop_blob: finished subtest basic, SUCCESS ial rota<14>[ 66.848741] [IGT] kms_prop_blob: exiting, ret=0 tion pip<8>[ 66.854465] <14>[ 66.875801] [IGT] kms_prop_blob: executing e C, plane 0 (kms_flip_event_leak:470) igt_kms-<14>[ 66.887682] [IGT] kms_prop_blob: starting subtest blob-prop-core DEBUG: display: SetCrtc pipe C, disabling (kms_flip_event_leak:470) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_flip_event_leak:470) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 17 (kms_flip_event_leak:470) igt_kms-DEBUG: display: SetCursor pipe C, disabling (kms_flip_event_leak:470) igt_kms-DEBUG: display: MoveCursor pipe C, (0, 0) (kms_flip_event_leak:470) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_flip_event_leak:470) igt_kms-DEBUG: display: Fixing up initial rotation pipe D, plane 0 (kms_flip_event_leak:470) igt_kms-DEBUG: display: SetCrtc pipe D, disabling (kms_flip_event_leak:470) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_flip_event_leak:470) igt_kms-DEBUG: display: Fixing up initial rotation pipe D, plane 17 (kms_flip_event_leak:470) igt_kms-DEBUG: display: SetCursor pipe D, disabling (kms_flip_event_leak:470) igt_kms-DEBUG: display: MoveCursor pipe D, (0, 0) (kms_flip_event_leak:470) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_flip_event_leak:470) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 0 (kms_flip_event_leak:470) igt_kms-DEBUG: display: SetCrtc pipe E, disabling (kms_flip_event_leak:470) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_flip_event_leak:470) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 17 (kms_flip_event_leak:470) igt_kms-DEBUG: display: SetCursor pipe E, disabling (kms_flip_event_leak:470) igt_kms-DEBUG: display: MoveCursor pipe E, (0, 0) (kms_flip_event_leak:470) igt_kms-DEBUG: display: } (kms_flip_event_leak:470) drmtest-DEBUG: Force option used: Using driver vc4 (kms_flip_event_leak:470) drmtest-DEBUG: Opened previously opened device: /dev/dri/card0 (kms_flip_event_leak:470) drmtest-DEBUG: Test requirement passed: !(fd<0) (kms_flip_event_leak:470) igt_fb-DEBUG: igt_create_fb_with_bo_size(width=4096, height=2160, format=XR24(0x34325258), modifier=0x0, size=0) (kms_flip_event_leak:470) igt_kms-CRITICAL: Test assertion failure function kmstest_dumb_create, file ../lib/igt_kms.c:1295: (kms_flip_event_leak:470) igt_kms-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0xB2)) << 0) | ((((sizeof(struct drm_mode_create_dumb)))) << ((0+8)+8)))), (&create)) == 0 (kms_flip_event_leak:470) igt_kms-CRITICAL: Last errno: 12, Cannot allocate memory (kms_flip_event_leak:470) igt_kms-CRITICAL: error: -1 != 0 (kms_flip_event_leak:470) igt_core-INFO: Stack trace: (kms_flip_event_leak:470) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_flip_event_leak:470) igt_core-INFO: #1 ../lib/igt_kms.c:1297 kmstest_dumb_create() (kms_flip_event_leak:470) igt_core-INFO: #2 ../lib/igt_fb.c:1249 create_bo_for_fb.isra.0() (kms_flip_event_leak:470) igt_core-INFO: #3 ../lib/igt_fb.c:2112 igt_create_fb_with_bo_size() (kms_flip_event_leak:470) igt_core-INFO: #4 ../lib/igt_fb.c:2155 igt_create_fb() (kms_flip_event_leak:470) igt_core-INFO: #5 [+0xb3a51964] (kms_flip_event_leak:470) igt_core-INFO: #6 [+0xb3a5146c] (kms_flip_event_leak:470) igt_core-INFO: #7 [__libc_init_first+0x80] (kms_flip_event_leak:470) igt_core-INFO: #8 [__libc_start_main+0x98] (kms_flip_event_leak:470) igt_core-INFO: #9 [+0xb3a514b0] **** END **** Dynamic subtest pipe-A-Writeback-1: FAIL (0.722s) Subtest basic: FAIL (0.737s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305764 for randomisation Opened device: /dev/dri/card0 Starting subt<14>[ 67.232295] [IGT] kms_prop_blob: finished subtest blob-prop-core, SUCCESS est: bas<14>[ 67.232552] [IGT] kms_prop_blob: exiting, ret=0 ic <8>[ 67.238427] Subtest basic: SUCCESS (0.000s) IGT<14>[ 67.257621] [IGT] kms_prop_blob: executing -Version<14>[ 67.258051] [IGT] kms_prop_blob: starting subtest blob-prop-validate : 1.28-g<14>[ 67.258301] [IGT] kms_prop_blob: finished subtest blob-prop-validate, SUCCESS a44ebfe <14>[ 67.258427] [IGT] kms_prop_blob: exiting, ret=0 (aarch64<8>[ 67.263746] ) (Linux<14>[ 67.286249] [IGT] kms_prop_blob: executing : 5.10.218-cip49-rt20 aarch64) <14>[ 67.299962] [IGT] kms_prop_blob: starting subtest blob-prop-lifetime Using IG<14>[ 67.300182] [IGT] kms_prop_blob: finished subtest blob-prop-lifetime, SUCCESS T_SRANDO<14>[ 67.300288] [IGT] kms_prop_blob: exiting, ret=0 M=170630<8>[ 67.305678] 5764 for<14>[ 67.323281] [IGT] kms_prop_blob: executing randomisation Opened device: /<14>[ 67.336976] [IGT] kms_prop_blob: starting subtest blob-multiple dev/dri/<14>[ 67.337340] [IGT] kms_prop_blob: finished subtest blob-multiple, SUCCESS card0 S<14>[ 67.337447] [IGT] kms_prop_blob: exiting, ret=0 tarting <8>[ 67.342700] subtest: blob-prop-core Subtest blob-prop-c<14>[ 67.367352] [IGT] kms_prop_blob: executing ore: SUC<14>[ 67.367722] [IGT] kms_prop_blob: starting subtest invalid-get-prop-any CESS (0.<14>[ 67.367808] [IGT] kms_prop_blob: finished subtest invalid-get-prop-any, SUCCESS 000s)[0<14>[ 67.367925] [IGT] kms_prop_blob: exiting, ret=0 m IGT-V<8>[ 67.372627] ersion: <14>[ 67.392204] [IGT] kms_prop_blob: executing 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-r<14>[ 67.411680] [IGT] kms_prop_blob: starting subtest invalid-get-prop t20 aarc<14>[ 67.411763] [IGT] kms_prop_blob: finished subtest invalid-get-prop, SUCCESS h64) Us<14>[ 67.411859] [IGT] kms_prop_blob: exiting, ret=0 ing IGT_<8>[ 67.416452] SRANDOM=<14>[ 67.436150] [IGT] kms_prop_blob: executing 1706305765 for randomisa<14>[ 67.449645] [IGT] kms_prop_blob: starting subtest invalid-set-prop-any tion Op<14>[ 67.449716] [IGT] kms_prop_blob: finished subtest invalid-set-prop-any, SUCCESS ened dev<14>[ 67.449812] [IGT] kms_prop_blob: exiting, ret=0 ice: /de<8>[ 67.454306] v/dri/ca<14>[ 67.472695] [IGT] kms_prop_blob: executing rd0 Starting su<14>[ 67.486528] [IGT] kms_prop_blob: starting subtest invalid-set-prop btest: b<14>[ 67.486600] [IGT] kms_prop_blob: finished subtest invalid-set-prop, SUCCESS lob-prop<14>[ 67.486694] [IGT] kms_prop_blob: exiting, ret=0 -validat<8>[ 67.491137] e S<8>[ 67.492532] ubtest b<8>[ 67.510274] lob-prop<14>[ 67.526966] [IGT] kms_setmode: executing -validat<14>[ 67.527415] [IGT] kms_setmode: starting subtest basic e: SUCCESS (0.00<14>[ 67.538204] [IGT] kms_setmode: finished subtest basic, SKIP 0s) <14>[ 67.538308] [IGT] kms_setmode: exiting, ret=77 IGT-Ver<8>[ 67.542843] sion: 1.28-ga44e<14>[ 67.558300] [IGT] kms_setmode: executing bfe (aar<14>[ 67.558707] [IGT] kms_setmode: starting subtest basic-clone-single-crtc ch64) (L<14>[ 67.558837] [IGT] kms_setmode: finished subtest basic-clone-single-crtc, SKIP inux: 5.<14>[ 67.558927] [IGT] kms_setmode: exiting, ret=77 10.218-c<8>[ 67.563535] ip49-rt2<14>[ 67.580096] [IGT] kms_setmode: executing 0 aarch64) Using IGT_SRANDOM=1706305765 for ran<14>[ 67.599641] [IGT] kms_setmode: starting subtest invalid-clone-single-crtc domisati<14>[ 67.599770] [IGT] kms_setmode: finished subtest invalid-clone-single-crtc, SKIP on Open<14>[ 67.599863] [IGT] kms_setmode: exiting, ret=77 ed devic<8>[ 67.604471] e: /dev/<14>[ 67.624929] [IGT] kms_setmode: executing dri/card<14>[ 67.639126] [IGT] kms_setmode: starting subtest invalid-clone-exclusive-crtc 0 Start<14>[ 67.639254] [IGT] kms_setmode: finished subtest invalid-clone-exclusive-crtc, SKIP ing subt<14>[ 67.639371] [IGT] kms_setmode: exiting, ret=77 est: blo<8>[ 67.660138] b-prop-lifetime Subtest blob-prop-lifetime: SUCCESS (0.000s) IGT-Version: 1.28-ga44ebfe (aarch<14>[ 67.675745] [IGT] kms_setmode: executing 64) (Lin<14>[ 67.676150] [IGT] kms_setmode: starting subtest clone-exclusive-crtc ux: 5.10<14>[ 67.676276] [IGT] kms_setmode: finished subtest clone-exclusive-crtc, SKIP .218-cip<14>[ 67.676366] [IGT] kms_setmode: exiting, ret=77 49-rt20 <8>[ 67.680998] aarch64)<14>[ 67.699551] [IGT] kms_setmode: executing Using IGT_SRAN<14>[ 67.718831] [IGT] kms_setmode: starting subtest invalid-clone-single-crtc-stealing DOM=1706<14>[ 67.718960] [IGT] kms_setmode: finished subtest invalid-clone-single-crtc-stealing, SKIP 305765 f<14>[ 67.719051] [IGT] kms_setmode: exiting, ret=77 or rando<8>[ 67.723708] misation<8>[ 67.725059] Opened<8>[ 67.742784] device:<14>[ 67.763158] [IGT] kms_vblank: executing /dev/dri/card0 Starting subtest: blob-multiple Subtest blob-multiple: SUCCESS (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Us<14>[ 67.780129] [IGT] kms_vblank: starting subtest invalid ing IGT_<14>[ 67.780463] [IGT] kms_vblank: starting dynamic subtest pipe-A-Writeback-1 SRANDOM=1706305765 for randomisation Opened device: /dev/dri/card0 Starting subtest: invalid-get-prop-any Subtest invalid-get-prop-any: SUCCESS (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305765 for randomisation Opened device: /dev/dri/card0 Starting subtest: invalid-get-prop Subtest invalid-get-prop: SUCCESS (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305765 for randomisation Opened device: /dev/dri/card0 Starting subtest: invalid-set-prop-any Subtest invalid-set-prop-any: SUCCESS (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305765 for randomisation Opened device: /dev/dri/card0 Starting subtest: invalid-set-prop Subtest invalid-set-prop: SUCCESS (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305765 for randomisation Opened device: /dev/dri/card0 Starting subtest: basic Testing: basic 1 connector combinations Testing: basic 2 connector combinations No dynamic tests executed. Subtest basic: SKIP (0.006s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305765 for randomisation Opened device: /dev/dri/card0 Starting subtest: basic-clone-single-crtc Testing: basic-clone-single-crtc 2 connector combinations No dynamic tests executed. Subtest basic-clone-single-crtc: SKIP (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305765 for randomisation Opened device: /dev/dri/card0 Starting subtest: invalid-clone-single-crtc Testing: invalid-clone-single-crtc 2 connector combinations No dynamic tests executed. Subtest invalid-clone-single-crtc: SKIP (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305765 for randomisation Opened device: /dev/dri/card0 Starting subtest: invalid-clone-exclusive-crtc Testing: invalid-clone-exclusive-crtc 2 connector combinations No dynamic tests executed. Subtest invalid-clone-exclusive-crtc: SKIP (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305765 for randomisation Opened device: /dev/dri/card0 Starting subtest: clone-exclusive-crtc Testing: clone-exclusive-crtc 2 connector combinations No dynamic tests executed. Subtest clone-exclusive-crtc: SKIP (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305765 for randomisation Opened device: /dev/dri/card0 Starting subtest: invalid-clone-single-crtc-stealing Testing: invalid-clone-single-crtc-stealing 2 connector combinations No dynamic tests executed. Subtest invalid-clone-single-crtc-stealing: SKIP (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305765 for randomisation Opened device: /dev/dri/card0 Starting subtest: invalid Starting dynamic subtest: pipe-A-Writeback-1 (kms_vblank:527) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:527) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:527) igt_kms-CRITICAL: Last errno: 16, Device or resource busy Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() #2 [+0xc90f338c] #3 [+0xc90f1c78] #4 [__libc_init_first+0x80] #5 [__libc_start_main+0x98] #6 [+0xc90f1cb0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** SetPlane pipe A, plane 4, disabling (kms_vblank:527) igt_kms-DEBUG: display: SetProp plane A.4 "rotation" to 0x1/1 (kms_vblank:527) igt_kms-DEBUG: display: SetProp plane A.4 "alpha" to 0xffff/65535 (kms_vblank:527) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:527) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 5 (kms_vblank:527) igt_kms-DEBUG: display: SetPlane pipe A, plane 5, disabling (kms_vblank:527) igt_kms-DEBUG: display: SetProp plane A.5 "rotation" to 0x1/1 (kms_vblank:527) igt_kms-DEBUG: display: SetProp plane A.5 "alpha" to 0xffff/65535 (kms_vblank:527) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:527) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 6 (kms_vblank:527) igt_kms-DEBUG: display: SetPlane pipe A, plane 6, disabling (kms_vblank:527) igt_kms-DEBUG: display: SetProp plane A.6 "rotation" to 0x1/1 (kms_vblank:527) igt_kms-DEBUG: display: SetProp plane A.6 "alpha" to 0xffff/65535 (kms_vblank:527) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:527) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 7 (kms_vblank:527) igt_kms-DEBUG: display: SetPlane pipe A, plane 7, disabling (kms_vblank:527) igt_kms-DEBUG: display: SetProp plane A.7 "rotation" to 0x1/1 (kms_vblank:527) igt_kms-DEBUG: display: SetProp plane A.7 "alpha" to 0xffff/65535 (kms_vblank:527) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:527) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 8 (kms_vblank:527) igt_kms-DEBUG: display: SetPlane pipe A, plane 8, disabling (kms_vblank:527) igt_kms-DEBUG: display: SetProp plane A.8 "rotation" to 0x1/1 (kms_vblank:527) igt_kms-DEBUG: display: SetProp plane A.8 "alpha" to 0xffff/65535 (kms_vblank:527) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:527) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 9 (kms_vblank:527) igt_kms-DEBUG: display: SetPlane pipe A, plane 9, disabling (kms_vblank:527) igt_kms-DEBUG: display: SetProp plane A.9 "rotation" to 0x1/1 (kms_vblank:527) igt_kms-DEBUG: display: SetProp plane A.9 "alpha" to 0xffff/65535 (kms_vblank:527) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:527) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 10 (kms_vblank:527) igt_kms-DEBUG: display: SetPlane pipe A, plane 10, disabling (kms_vblank:527) igt_kms-DEBUG: display: SetProp plane A.10 "rotation" to 0x1/1 (kms_vblank:527) igt_kms-DEBUG: display: SetProp plane A.10 "alpha" to 0xffff/65535 (kms_vblank:527) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:527) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 11 (kms_vblank:527) igt_kms-DEBUG: display: SetPlane pipe A, plane 11, disabling (kms_vblank:527) igt_kms-DEBUG: display: SetProp plane A.11 "rotation" to 0x1/1 (kms_vblank:527) igt_kms-DEBUG: display: SetProp plane A.11 "alpha" to 0xffff/65535 (kms_vblank:527) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:527) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 12 (kms_vblank:527) igt_kms-DEBUG: display: SetPlane pipe A, plane 12, disabling (kms_vblank:527) igt_kms-DEBUG: display: SetProp plane A.12 "rotation" to 0x1/1 (kms_vblank:527) igt_kms-DEBUG: display: SetProp plane A.12 "alpha" to 0xffff/65535 (kms_vblank:527) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:527) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 13 (kms_vblank:527) igt_kms-DEBUG: display: SetPlane pipe A, plane 13, disabling (kms_vblank:527) igt_kms-DEBUG: display: SetProp plane A.13 "rotation" to 0x1/1 (kms_vblank:527) igt_kms-DEBUG: display: SetProp plane A.13 "alpha" to 0xffff/65535 (kms_vblank:527) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:527) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 14 (kms_vblank:527) igt_kms-DEBUG: display: SetPlane pipe A, plane 14, disabling (kms_vblank:527) igt_kms-DEBUG: display: SetProp plane A.14 "rotation" to 0x1/1 (kms_vblank:527) igt_kms-DEBUG: display: SetProp plane A.14 "alpha" to 0xffff/65535 (kms_vblank:527) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:527) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 15 (kms_vblank:527) igt_kms-DEBUG: display: SetPlane pipe A, plane 15, disabling (kms_vblank:527) igt_kms-DEBUG: display: SetProp plane A.15 "rotation" to 0x1/1 (kms_vblank:527) igt_kms-DEBUG: display: SetProp plane A.15 "alpha" to 0xffff/65535 (kms_vblank:527) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:527) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 16 (kms_vblank:527) igt_kms-DEBUG: display: SetPlane pipe A, plane 16, disabling (kms_vblank:527) igt_kms-DEBUG: display: SetProp plane A.16 "rotation" to 0x1/1 (kms_vblank:527) igt_kms-DEBUG: display: SetProp plane A.16 "alpha" to 0xffff/65535 (kms_vblank:527) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:527) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 17 (kms_vblank:527) igt_kms-DEBUG: display: SetCursor pipe A, disabling (kms_vblank:527) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0) (kms_vblank:527) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:527) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 0 (kms_vblank:527) igt_kms-DEBUG: display: SetCrtc pipe B, disabling (kms_vblank:527) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:527) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 17 (kms_vblank:527) igt_kms-DEBUG: display: SetCursor pipe B, disabling (kms_vblank:527) igt_kms-DEBUG: display: MoveCursor pipe B, (0, 0) (kms_vblank:527) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:527) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 0 (kms_vblank:527) igt_kms-DEBUG: display: SetCrtc pipe C, disabling (kms_vblank:527) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:527) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 17 (kms_vblank:527) igt_kms-DEBUG: display: SetCursor pipe C, disabling (kms_vblank:527) igt_kms-DEBUG: display: MoveCursor pipe C, (0, 0) (kms_vblank:527) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_<14>[ 71.718000] [IGT] kms_vblank: finished subtest pipe-A-Writeback-1, FAIL planes <14>[ 71.718131] [IGT] kms_vblank: finished subtest invalid, FAIL (kms_vblank:527) igt_kms<14>[ 71.735229] [IGT] kms_vblank: exiting, ret=98 -DEBUG: display: Fixing up initial rotation pipe D, plane 0 (kms_vblank:527<8>[ 71.745463] ) igt_kms-DEBUG: display: SetCrtc pipe D, disabling (kms_vblank:527) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_<14>[ 71.765319] [IGT] kms_vblank: executing planes (kms_vblank:527) igt_kms-DEBUG: display: Fixing up initial rotation pipe D, plane 17 (kms_vblank:527) igt_kms-DEBUG: displa<14>[ 71.780471] [IGT] kms_vblank: starting subtest crtc-id y: S<14>[ 71.780859] [IGT] kms_vblank: starting dynamic subtest pipe-A-Writeback-1 etCursor pipe D, disabling (kms_vblank:527) igt_kms-DEBUG: display: MoveCursor pipe D, (0, 0) (kms_vblank:527) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:527) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 0 (kms_vblank:527) igt_kms-DEBUG: display: SetCrtc pipe E, disabling (kms_vblank:527) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:527) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 17 (kms_vblank:527) igt_kms-DEBUG: display: SetCursor pipe E, disabling (kms_vblank:527) igt_kms-DEBUG: display: MoveCursor pipe E, (0, 0) (kms_vblank:527) igt_kms-DEBUG: display: } (kms_vblank:527) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:527) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:527) igt_kms-CRITICAL: Last errno: 16, Device or resource busy (kms_vblank:527) igt_core-INFO: Stack trace: (kms_vblank:527) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_vblank:527) igt_core-INFO: #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() (kms_vblank:527) igt_core-INFO: #2 [+0xc90f338c] (kms_vblank:527) igt_core-INFO: #3 [+0xc90f1c78] (kms_vblank:527) igt_core-INFO: #4 [__libc_init_first+0x80] (kms_vblank:527) igt_core-INFO: #5 [__libc_start_main+0x98] (kms_vblank:527) igt_core-INFO: #6 [+0xc90f1cb0] **** END **** Dynamic subtest pipe-A-Writeback-1: FAIL (3.937s) Subtest invalid: FAIL (3.938s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305769 for randomisation Opened device: /dev/dri/card0 Starting subtest: crtc-id Starting dynamic subtest: pipe-A-Writeback-1 (kms_vblank:530) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:530) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:530) igt_kms-CRITICAL: Last errno: 16, Device or resource busy Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() #2 [+0xce593728] #3 [+0xce591c78] #4 [__libc_init_first+0x80] #5 [__libc_start_main+0x98] #6 [+0xce591cb0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** SetPlane pipe A, plane 4, disabling (kms_vblank:530) igt_kms-DEBUG: display: SetProp plane A.4 "rotation" to 0x1/1 (kms_vblank:530) igt_kms-DEBUG: display: SetProp plane A.4 "alpha" to 0xffff/65535 (kms_vblank:530) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:530) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 5 (kms_vblank:530) igt_kms-DEBUG: display: SetPlane pipe A, plane 5, disabling (kms_vblank:530) igt_kms-DEBUG: display: SetProp plane A.5 "rotation" to 0x1/1 (kms_vblank:530) igt_kms-DEBUG: display: SetProp plane A.5 "alpha" to 0xffff/65535 (kms_vblank:530) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:530) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 6 (kms_vblank:530) igt_kms-DEBUG: display: SetPlane pipe A, plane 6, disabling (kms_vblank:530) igt_kms-DEBUG: display: SetProp plane A.6 "rotation" to 0x1/1 (kms_vblank:530) igt_kms-DEBUG: display: SetProp plane A.6 "alpha" to 0xffff/65535 (kms_vblank:530) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:530) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 7 (kms_vblank:530) igt_kms-DEBUG: display: SetPlane pipe A, plane 7, disabling (kms_vblank:530) igt_kms-DEBUG: display: SetProp plane A.7 "rotation" to 0x1/1 (kms_vblank:530) igt_kms-DEBUG: display: SetProp plane A.7 "alpha" to 0xffff/65535 (kms_vblank:530) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:530) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 8 (kms_vblank:530) igt_kms-DEBUG: display: SetPlane pipe A, plane 8, disabling (kms_vblank:530) igt_kms-DEBUG: display: SetProp plane A.8 "rotation" to 0x1/1 (kms_vblank:530) igt_kms-DEBUG: display: SetProp plane A.8 "alpha" to 0xffff/65535 (kms_vblank:530) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:530) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 9 (kms_vblank:530) igt_kms-DEBUG: display: SetPlane pipe A, plane 9, disabling (kms_vblank:530) igt_kms-DEBUG: display: SetProp plane A.9 "rotation" to 0x1/1 (kms_vblank:530) igt_kms-DEBUG: display: SetProp plane A.9 "alpha" to 0xffff/65535 (kms_vblank:530) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:530) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 10 (kms_vblank:530) igt_kms-DEBUG: display: SetPlane pipe A, plane 10, disabling (kms_vblank:530) igt_kms-DEBUG: display: SetProp plane A.10 "rotation" to 0x1/1 (kms_vblank:530) igt_kms-DEBUG: display: SetProp plane A.10 "alpha" to 0xffff/65535 (kms_vblank:530) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:530) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 11 (kms_vblank:530) igt_kms-DEBUG: display: SetPlane pipe A, plane 11, disabling (kms_vblank:530) igt_kms-DEBUG: display: SetProp plane A.11 "rotation" to 0x1/1 (kms_vblank:530) igt_kms-DEBUG: display: SetProp plane A.11 "alpha" to 0xffff/65535 (kms_vblank:530) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:530) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 12 (kms_vblank:530) igt_kms-DEBUG: display: SetPlane pipe A, plane 12, disabling (kms_vblank:530) igt_kms-DEBUG: display: SetProp plane A.12 "rotation" to 0x1/1 (kms_vblank:530) igt_kms-DEBUG: display: SetProp plane A.12 "alpha" to 0xffff/65535 (kms_vblank:530) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:530) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 13 (kms_vblank:530) igt_kms-DEBUG: display: SetPlane pipe A, plane 13, disabling (kms_vblank:530) igt_kms-DEBUG: display: SetProp plane A.13 "rotation" to 0x1/1 (kms_vblank:530) igt_kms-DEBUG: display: SetProp plane A.13 "alpha" to 0xffff/65535 (kms_vblank:530) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:530) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 14 (kms_vblank:530) igt_kms-DEBUG: display: SetPlane pipe A, plane 14, disabling (kms_vblank:530) igt_kms-DEBUG: display: SetProp plane A.14 "rotation" to 0x1/1 (kms_vblank:530) igt_kms-DEBUG: display: SetProp plane A.14 "alpha" to 0xffff/65535 (kms_vblank:530) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:530) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 15 (kms_vblank:530) igt_kms-DEBUG: display: SetPlane pipe A, plane 15, disabling (kms_vblank:530) igt_kms-DEBUG: display: SetProp plane A.15 "rotation" to 0x1/1 (kms_vblank:530) igt_kms-DEBUG: display: SetProp plane A.15 "alpha" to 0xffff/65535 (kms_vblank:530) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:530) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 16 (kms_vblank:530) igt_kms-DEBUG: display: SetPlane pipe A, plane 16, disabling (kms_vblank:530) igt_kms-DEBUG: display: SetProp plane A.16 "rotation" to 0x1/1 (kms_vblank:530) igt_kms-DEBUG: display: SetProp plane A.16 "alpha" to 0xffff/65535 (kms_vblank:530) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:530) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 17 (kms_vblank:530) igt_kms-DEBUG: display: SetCursor pipe A, disabling (kms_vblank:530) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0) (kms_vblank:530) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:530) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 0 (kms_vblank:530) igt_kms-DEBUG: display: SetCrtc pipe B, disabling (kms_vblank:530) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:530) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 17 (kms_vblank:530) igt_kms-DEBUG: display: SetCursor pipe B, disabling (kms_vblank:530) igt_kms-DEBUG: display: MoveCursor pipe B, (0, 0) (kms_vblank:530) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:530) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 0 (kms_vblank:530) igt_kms-DEBUG: display: SetCrtc pipe C, disabling (kms_vblank:530) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:530) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 17 (kms_vblank:530) igt_kms-DEBUG: display: SetCursor pipe C, disabling (kms_vblank:530) igt_kms-DEBUG: display: MoveCursor pipe C, (0, 0) (kms_vblank:530) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:530) igt_kms-DEBUG: display:<14>[ 75.559448] [IGT] kms_vblank: finished subtest pipe-A-Writeback-1, FAIL Fix<14>[ 75.559587] [IGT] kms_vblank: finished subtest crtc-id, FAIL ing up i<14>[ 75.560979] [IGT] kms_vblank: exiting, ret=98 nitial r<8>[ 75.568623] otation pipe D, <14>[ 75.590855] [IGT] kms_vblank: executing plane 0 (kms_vblank:530) igt_kms-DEBUG: display: SetCrtc pipe D, disabling (kms_vblank:530) igt_kms-DEBUG: Test requiremen<14>[ 75.605987] [IGT] kms_vblank: starting subtest accuracy-idle t passed<14>[ 75.606384] [IGT] kms_vblank: starting dynamic subtest pipe-A-Writeback-1 : plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:530) igt_kms-DEBUG: display: Fixing up initial rotation pipe D, plane 17 (kms_vblank:530) igt_kms-DEBUG: display: SetCursor pipe D, disabling (kms_vblank:530) igt_kms-DEBUG: display: MoveCursor pipe D, (0, 0) (kms_vblank:530) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:530) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 0 (kms_vblank:530) igt_kms-DEBUG: display: SetCrtc pipe E, disabling (kms_vblank:530) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:530) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 17 (kms_vblank:530) igt_kms-DEBUG: display: SetCursor pipe E, disabling (kms_vblank:530) igt_kms-DEBUG: display: MoveCursor pipe E, (0, 0) (kms_vblank:530) igt_kms-DEBUG: display: } (kms_vblank:530) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:530) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:530) igt_kms-CRITICAL: Last errno: 16, Device or resource busy (kms_vblank:530) igt_core-INFO: Stack trace: (kms_vblank:530) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_vblank:530) igt_core-INFO: #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() (kms_vblank:530) igt_core-INFO: #2 [+0xce593728] (kms_vblank:530) igt_core-INFO: #3 [+0xce591c78] (kms_vblank:530) igt_core-INFO: #4 [__libc_init_first+0x80] (kms_vblank:530) igt_core-INFO: #5 [__libc_start_main+0x98] (kms_vblank:530) igt_core-INFO: #6 [+0xce591cb0] **** END **** Dynamic subtest pipe-A-Writeback-1: FAIL (3.778s) Subtest crtc-id: FAIL (3.779s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305773 for randomisation Opened device: /dev/dri/card0 Starting subtest: accuracy-idle Starting dynamic subtest: pipe-A-Writeback-1 (kms_vblank:533) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:533) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:533) igt_kms-CRITICAL: Last errno: 16, Device or resource busy Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() #2 [+0xea501f94] #3 [+0xea502fa0] #4 [+0xea5031bc] #5 [+0xea501c78] #6 [__libc_init_first+0x80] #7 [__libc_start_main+0x98] #8 [+0xea501cb0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** (kms_vblank:533) igt_kms-DEBUG: display: SetProp plane A.4 "rotation" to 0x1/1 (kms_vblank:533) igt_kms-DEBUG: display: SetProp plane A.4 "alpha" to 0xffff/65535 (kms_vblank:533) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:533) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 5 (kms_vblank:533) igt_kms-DEBUG: display: SetPlane pipe A, plane 5, disabling (kms_vblank:533) igt_kms-DEBUG: display: SetProp plane A.5 "rotation" to 0x1/1 (kms_vblank:533) igt_kms-DEBUG: display: SetProp plane A.5 "alpha" to 0xffff/65535 (kms_vblank:533) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:533) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 6 (kms_vblank:533) igt_kms-DEBUG: display: SetPlane pipe A, plane 6, disabling (kms_vblank:533) igt_kms-DEBUG: display: SetProp plane A.6 "rotation" to 0x1/1 (kms_vblank:533) igt_kms-DEBUG: display: SetProp plane A.6 "alpha" to 0xffff/65535 (kms_vblank:533) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:533) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 7 (kms_vblank:533) igt_kms-DEBUG: display: SetPlane pipe A, plane 7, disabling (kms_vblank:533) igt_kms-DEBUG: display: SetProp plane A.7 "rotation" to 0x1/1 (kms_vblank:533) igt_kms-DEBUG: display: SetProp plane A.7 "alpha" to 0xffff/65535 (kms_vblank:533) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:533) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 8 (kms_vblank:533) igt_kms-DEBUG: display: SetPlane pipe A, plane 8, disabling (kms_vblank:533) igt_kms-DEBUG: display: SetProp plane A.8 "rotation" to 0x1/1 (kms_vblank:533) igt_kms-DEBUG: display: SetProp plane A.8 "alpha" to 0xffff/65535 (kms_vblank:533) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:533) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 9 (kms_vblank:533) igt_kms-DEBUG: display: SetPlane pipe A, plane 9, disabling (kms_vblank:533) igt_kms-DEBUG: display: SetProp plane A.9 "rotation" to 0x1/1 (kms_vblank:533) igt_kms-DEBUG: display: SetProp plane A.9 "alpha" to 0xffff/65535 (kms_vblank:533) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:533) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 10 (kms_vblank:533) igt_kms-DEBUG: display: SetPlane pipe A, plane 10, disabling (kms_vblank:533) igt_kms-DEBUG: display: SetProp plane A.10 "rotation" to 0x1/1 (kms_vblank:533) igt_kms-DEBUG: display: SetProp plane A.10 "alpha" to 0xffff/65535 (kms_vblank:533) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:533) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 11 (kms_vblank:533) igt_kms-DEBUG: display: SetPlane pipe A, plane 11, disabling (kms_vblank:533) igt_kms-DEBUG: display: SetProp plane A.11 "rotation" to 0x1/1 (kms_vblank:533) igt_kms-DEBUG: display: SetProp plane A.11 "alpha" to 0xffff/65535 (kms_vblank:533) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:533) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 12 (kms_vblank:533) igt_kms-DEBUG: display: SetPlane pipe A, plane 12, disabling (kms_vblank:533) igt_kms-DEBUG: display: SetProp plane A.12 "rotation" to 0x1/1 (kms_vblank:533) igt_kms-DEBUG: display: SetProp plane A.12 "alpha" to 0xffff/65535 (kms_vblank:533) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:533) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 13 (kms_vblank:533) igt_kms-DEBUG: display: SetPlane pipe A, plane 13, disabling (kms_vblank:533) igt_kms-DEBUG: display: SetProp plane A.13 "rotation" to 0x1/1 (kms_vblank:533) igt_kms-DEBUG: display: SetProp plane A.13 "alpha" to 0xffff/65535 (kms_vblank:533) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:533) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 14 (kms_vblank:533) igt_kms-DEBUG: display: SetPlane pipe A, plane 14, disabling (kms_vblank:533) igt_kms-DEBUG: display: SetProp plane A.14 "rotation" to 0x1/1 (kms_vblank:533) igt_kms-DEBUG: display: SetProp plane A.14 "alpha" to 0xffff/65535 (kms_vblank:533) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:533) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 15 (kms_vblank:533) igt_kms-DEBUG: display: SetPlane pipe A, plane 15, disabling (kms_vblank:533) igt_kms-DEBUG: display: SetProp plane A.15 "rotation" to 0x1/1 (kms_vblank:533) igt_kms-DEBUG: display: SetProp plane A.15 "alpha" to 0xffff/65535 (kms_vblank:533) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:533) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 16 (kms_vblank:533) igt_kms-DEBUG: display: SetPlane pipe A, plane 16, disabling (kms_vblank:533) igt_kms-DEBUG: display: SetProp plane A.16 "rotation" to 0x1/1 (kms_vblank:533) igt_kms-DEBUG: display: SetProp plane A.16 "alpha" to 0xffff/65535 (kms_vblank:533) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:533) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 17 (kms_vblank:533) igt_kms-DEBUG: display: SetCursor pipe A, disabling (kms_vblank:533) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0) (kms_vblank:533) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:533) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 0 (kms_vblank:533) igt_kms-DEBUG: display: SetCrtc pipe B, disabling (kms_vblank:533) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:533) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 17 (kms_vblank:533) igt_kms-DEBUG: display: SetCursor pipe B, disabling (kms_vblank:533) igt_kms-DEBUG: display: MoveCursor pipe B, (0, 0) (kms_vblank:533) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:533) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 0 (kms_vblank:533) igt_kms-DEBUG: display: SetCrtc pipe C, disabling (kms_vblank:533) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:533) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 17 (kms_vblank:533) igt_kms-DEBUG: display: SetCursor pipe C, disabling (kms_vblank:533) igt_kms-DEBUG: display: MoveCursor pipe C, (0, 0) (kms_vblank:533) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:533) igt_km<14>[ 79.400830] [IGT] kms_vblank: finished subtest pipe-A-Writeback-1, FAIL s-DEBUG:<14>[ 79.400968] [IGT] kms_vblank: finished subtest accuracy-idle, FAIL display<14>[ 79.411207] [IGT] kms_vblank: exiting, ret=98 : Fixing up initial rotation pipe D, plane 0 (kms_vblank:533) igt_kms-DEBUG: display: SetCrtc pipe D, disabling (kms_vblank:53<8>[ 79.431656] 3) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:533) igt_kms-DEBUG: display: Fixing up <14>[ 79.451431] [IGT] kms_vblank: executing initial rotation pipe D, plane 17 (kms_vblank:533) igt_kms-DEBUG: display: SetCurso<14>[ 79.466072] [IGT] kms_vblank: starting subtest query-idle r pipe D<14>[ 79.466452] [IGT] kms_vblank: starting dynamic subtest pipe-A-Writeback-1 , disabling (kms_vblank:533) igt_kms-DEBUG: display: MoveCursor pipe D, (0, 0) (kms_vblank:533) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:533) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 0 (kms_vblank:533) igt_kms-DEBUG: display: SetCrtc pipe E, disabling (kms_vblank:533) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:533) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 17 (kms_vblank:533) igt_kms-DEBUG: display: SetCursor pipe E, disabling (kms_vblank:533) igt_kms-DEBUG: display: MoveCursor pipe E, (0, 0) (kms_vblank:533) igt_kms-DEBUG: display: } (kms_vblank:533) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:533) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:533) igt_kms-CRITICAL: Last errno: 16, Device or resource busy (kms_vblank:533) igt_core-INFO: Stack trace: (kms_vblank:533) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_vblank:533) igt_core-INFO: #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() (kms_vblank:533) igt_core-INFO: #2 [+0xea501f94] (kms_vblank:533) igt_core-INFO: #3 [+0xea502fa0] (kms_vblank:533) igt_core-INFO: #4 [+0xea5031bc] (kms_vblank:533) igt_core-INFO: #5 [+0xea501c78] (kms_vblank:533) igt_core-INFO: #6 [__libc_init_first+0x80] (kms_vblank:533) igt_core-INFO: #7 [__libc_start_main+0x98] (kms_vblank:533) igt_core-INFO: #8 [+0xea501cb0] **** END **** Dynamic subtest pipe-A-Writeback-1: FAIL (3.794s) Subtest accuracy-idle: FAIL (3.795s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305777 for randomisation Opened device: /dev/dri/card0 Starting subtest: query-idle Starting dynamic subtest: pipe-A-Writeback-1 (kms_vblank:536) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:536) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:536) igt_kms-CRITICAL: Last errno: 16, Device or resource busy Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() #2 [+0xb5781f94] #3 [+0xb5782fa0] #4 [+0xb57831bc] #5 [+0xb5781c78] #6 [__libc_init_first+0x80] #7 [__libc_start_main+0x98] #8 [+0xb5781cb0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** (kms_vblank:536) igt_kms-DEBUG: display: SetProp plane A.4 "rotation" to 0x1/1 (kms_vblank:536) igt_kms-DEBUG: display: SetProp plane A.4 "alpha" to 0xffff/65535 (kms_vblank:536) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:536) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 5 (kms_vblank:536) igt_kms-DEBUG: display: SetPlane pipe A, plane 5, disabling (kms_vblank:536) igt_kms-DEBUG: display: SetProp plane A.5 "rotation" to 0x1/1 (kms_vblank:536) igt_kms-DEBUG: display: SetProp plane A.5 "alpha" to 0xffff/65535 (kms_vblank:536) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:536) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 6 (kms_vblank:536) igt_kms-DEBUG: display: SetPlane pipe A, plane 6, disabling (kms_vblank:536) igt_kms-DEBUG: display: SetProp plane A.6 "rotation" to 0x1/1 (kms_vblank:536) igt_kms-DEBUG: display: SetProp plane A.6 "alpha" to 0xffff/65535 (kms_vblank:536) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:536) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 7 (kms_vblank:536) igt_kms-DEBUG: display: SetPlane pipe A, plane 7, disabling (kms_vblank:536) igt_kms-DEBUG: display: SetProp plane A.7 "rotation" to 0x1/1 (kms_vblank:536) igt_kms-DEBUG: display: SetProp plane A.7 "alpha" to 0xffff/65535 (kms_vblank:536) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:536) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 8 (kms_vblank:536) igt_kms-DEBUG: display: SetPlane pipe A, plane 8, disabling (kms_vblank:536) igt_kms-DEBUG: display: SetProp plane A.8 "rotation" to 0x1/1 (kms_vblank:536) igt_kms-DEBUG: display: SetProp plane A.8 "alpha" to 0xffff/65535 (kms_vblank:536) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:536) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 9 (kms_vblank:536) igt_kms-DEBUG: display: SetPlane pipe A, plane 9, disabling (kms_vblank:536) igt_kms-DEBUG: display: SetProp plane A.9 "rotation" to 0x1/1 (kms_vblank:536) igt_kms-DEBUG: display: SetProp plane A.9 "alpha" to 0xffff/65535 (kms_vblank:536) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:536) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 10 (kms_vblank:536) igt_kms-DEBUG: display: SetPlane pipe A, plane 10, disabling (kms_vblank:536) igt_kms-DEBUG: display: SetProp plane A.10 "rotation" to 0x1/1 (kms_vblank:536) igt_kms-DEBUG: display: SetProp plane A.10 "alpha" to 0xffff/65535 (kms_vblank:536) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:536) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 11 (kms_vblank:536) igt_kms-DEBUG: display: SetPlane pipe A, plane 11, disabling (kms_vblank:536) igt_kms-DEBUG: display: SetProp plane A.11 "rotation" to 0x1/1 (kms_vblank:536) igt_kms-DEBUG: display: SetProp plane A.11 "alpha" to 0xffff/65535 (kms_vblank:536) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:536) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 12 (kms_vblank:536) igt_kms-DEBUG: display: SetPlane pipe A, plane 12, disabling (kms_vblank:536) igt_kms-DEBUG: display: SetProp plane A.12 "rotation" to 0x1/1 (kms_vblank:536) igt_kms-DEBUG: display: SetProp plane A.12 "alpha" to 0xffff/65535 (kms_vblank:536) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:536) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 13 (kms_vblank:536) igt_kms-DEBUG: display: SetPlane pipe A, plane 13, disabling (kms_vblank:536) igt_kms-DEBUG: display: SetProp plane A.13 "rotation" to 0x1/1 (kms_vblank:536) igt_kms-DEBUG: display: SetProp plane A.13 "alpha" to 0xffff/65535 (kms_vblank:536) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:536) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 14 (kms_vblank:536) igt_kms-DEBUG: display: SetPlane pipe A, plane 14, disabling (kms_vblank:536) igt_kms-DEBUG: display: SetProp plane A.14 "rotation" to 0x1/1 (kms_vblank:536) igt_kms-DEBUG: display: SetProp plane A.14 "alpha" to 0xffff/65535 (kms_vblank:536) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:536) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 15 (kms_vblank:536) igt_kms-DEBUG: display: SetPlane pipe A, plane 15, disabling (kms_vblank:536) igt_kms-DEBUG: display: SetProp plane A.15 "rotation" to 0x1/1 (kms_vblank:536) igt_kms-DEBUG: display: SetProp plane A.15 "alpha" to 0xffff/65535 (kms_vblank:536) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:536) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 16 (kms_vblank:536) igt_kms-DEBUG: display: SetPlane pipe A, plane 16, disabling (kms_vblank:536) igt_kms-DEBUG: display: SetProp plane A.16 "rotation" to 0x1/1 (kms_vblank:536) igt_kms-DEBUG: display: SetProp plane A.16 "alpha" to 0xffff/65535 (kms_vblank:536) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:536) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 17 (kms_vblank:536) igt_kms-DEBUG: display: SetCursor pipe A, disabling (kms_vblank:536) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0) (kms_vblank:536) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:536) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 0 (kms_vblank:536) igt_kms-DEBUG: display: SetCrtc pipe B, disabling (kms_vblank:536) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:536) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 17 (kms_vblank:536) igt_kms-DEBUG: display: SetCursor pipe B, disabling (kms_vblank:536) igt_kms-DEBUG: display: MoveCursor pipe B, (0, 0) (kms_vblank:536) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:536) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 0 (kms_vblank:536) igt_kms-DEBUG: display: SetCrtc pipe C, disabling (kms_vblank:536) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:536) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 17 (kms_vblank:536) igt_kms-DEBUG: display: SetCursor pipe C, disabling (kms_vblank:536) igt_kms-DEBUG: display: MoveCursor pipe C, (0, 0) (kms_vblank:536) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && pla<14>[ 83.238814] [IGT] kms_vblank: finished subtest pipe-A-Writeback-1, FAIL ne_idx <<14>[ 83.238954] [IGT] kms_vblank: finished subtest query-idle, FAIL pipe->n<14>[ 83.240333] [IGT] kms_vblank: exiting, ret=98 _planes (kms_vblank:536) igt_kms-DEBUG: display<8>[ 83.262802] : Fixing up initial rotation pipe D, plane 0 (kms_vblank:536) igt_kms-DEBUG: display: SetCrtc pipe D, disabling (kms_vblank:536) igt_kms-DEBUG: Test requirement passed: plane_idx >= <14>[ 83.285635] [IGT] kms_vblank: executing 0 && plane_idx < pipe->n_planes (kms_vblank:536) igt_kms-DEBUG: display: Fixing up initial rotation pipe D, plane 1<14>[ 83.299869] [IGT] kms_vblank: starting subtest query-idle-hang 7 (kms_<14>[ 83.299998] [IGT] kms_vblank: finished subtest query-idle-hang, SKIP vblank:5<14>[ 83.300170] [IGT] kms_vblank: exiting, ret=77 36) igt_<8>[ 83.305297] kms-DEBUG: display: <14>[ 83.329632] [IGT] kms_vblank: executing SetCursor pipe D, disabling (kms_vblank:536) igt_kms-DEBUG: display: MoveCursor pipe D, (0, 0) (kms_vblank:536) igt_kms-DEBUG: Tes<14>[ 83.344257] [IGT] kms_vblank: starting subtest query-forked t requir<14>[ 83.344662] [IGT] kms_vblank: starting dynamic subtest pipe-A-Writeback-1 ement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:536) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 0 (kms_vblank:536) igt_kms-DEBUG: display: SetCrtc pipe E, disabling (kms_vblank:536) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:536) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 17 (kms_vblank:536) igt_kms-DEBUG: display: SetCursor pipe E, disabling (kms_vblank:536) igt_kms-DEBUG: display: MoveCursor pipe E, (0, 0) (kms_vblank:536) igt_kms-DEBUG: display: } (kms_vblank:536) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:536) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:536) igt_kms-CRITICAL: Last errno: 16, Device or resource busy (kms_vblank:536) igt_core-INFO: Stack trace: (kms_vblank:536) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_vblank:536) igt_core-INFO: #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() (kms_vblank:536) igt_core-INFO: #2 [+0xb5781f94] (kms_vblank:536) igt_core-INFO: #3 [+0xb5782fa0] (kms_vblank:536) igt_core-INFO: #4 [+0xb57831bc] (kms_vblank:536) igt_core-INFO: #5 [+0xb5781c78] (kms_vblank:536) igt_core-INFO: #6 [__libc_init_first+0x80] (kms_vblank:536) igt_core-INFO: #7 [__libc_start_main+0x98] (kms_vblank:536) igt_core-INFO: #8 [+0xb5781cb0] **** END **** Dynamic subtest pipe-A-Writeback-1: FAIL (3.772s) Subtest query-idle: FAIL (3.773s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305781 for randomisation Opened device: /dev/dri/card0 Starting subtest: query-idle-hang Test requirement not met in function gem_context_require_bannable, file ../lib/i915/gem_context.c:324: Test requirement: has_ban_period || has_bannable Last errno: 22, Invalid argument Subtest query-idle-hang: SKIP (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305781 for randomisation Opened device: /dev/dri/card0 Starting subtest: query-forked Starting dynamic subtest: pipe-A-Writeback-1 (kms_vblank:542) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:542) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:542) igt_kms-CRITICAL: Last errno: 16, Device or resource busy Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() #2 [+0xe77e1f94] #3 [+0xe77e2fa0] #4 [+0xe77e31bc] #5 [+0xe77e1c78] #6 [__libc_init_first+0x80] #7 [__libc_start_main+0x98] #8 [+0xe77e1cb0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** (kms_vblank:542) igt_kms-DEBUG: display: SetProp plane A.4 "rotation" to 0x1/1 (kms_vblank:542) igt_kms-DEBUG: display: SetProp plane A.4 "alpha" to 0xffff/65535 (kms_vblank:542) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:542) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 5 (kms_vblank:542) igt_kms-DEBUG: display: SetPlane pipe A, plane 5, disabling (kms_vblank:542) igt_kms-DEBUG: display: SetProp plane A.5 "rotation" to 0x1/1 (kms_vblank:542) igt_kms-DEBUG: display: SetProp plane A.5 "alpha" to 0xffff/65535 (kms_vblank:542) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:542) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 6 (kms_vblank:542) igt_kms-DEBUG: display: SetPlane pipe A, plane 6, disabling (kms_vblank:542) igt_kms-DEBUG: display: SetProp plane A.6 "rotation" to 0x1/1 (kms_vblank:542) igt_kms-DEBUG: display: SetProp plane A.6 "alpha" to 0xffff/65535 (kms_vblank:542) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:542) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 7 (kms_vblank:542) igt_kms-DEBUG: display: SetPlane pipe A, plane 7, disabling (kms_vblank:542) igt_kms-DEBUG: display: SetProp plane A.7 "rotation" to 0x1/1 (kms_vblank:542) igt_kms-DEBUG: display: SetProp plane A.7 "alpha" to 0xffff/65535 (kms_vblank:542) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:542) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 8 (kms_vblank:542) igt_kms-DEBUG: display: SetPlane pipe A, plane 8, disabling (kms_vblank:542) igt_kms-DEBUG: display: SetProp plane A.8 "rotation" to 0x1/1 (kms_vblank:542) igt_kms-DEBUG: display: SetProp plane A.8 "alpha" to 0xffff/65535 (kms_vblank:542) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:542) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 9 (kms_vblank:542) igt_kms-DEBUG: display: SetPlane pipe A, plane 9, disabling (kms_vblank:542) igt_kms-DEBUG: display: SetProp plane A.9 "rotation" to 0x1/1 (kms_vblank:542) igt_kms-DEBUG: display: SetProp plane A.9 "alpha" to 0xffff/65535 (kms_vblank:542) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:542) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 10 (kms_vblank:542) igt_kms-DEBUG: display: SetPlane pipe A, plane 10, disabling (kms_vblank:542) igt_kms-DEBUG: display: SetProp plane A.10 "rotation" to 0x1/1 (kms_vblank:542) igt_kms-DEBUG: display: SetProp plane A.10 "alpha" to 0xffff/65535 (kms_vblank:542) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:542) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 11 (kms_vblank:542) igt_kms-DEBUG: display: SetPlane pipe A, plane 11, disabling (kms_vblank:542) igt_kms-DEBUG: display: SetProp plane A.11 "rotation" to 0x1/1 (kms_vblank:542) igt_kms-DEBUG: display: SetProp plane A.11 "alpha" to 0xffff/65535 (kms_vblank:542) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:542) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 12 (kms_vblank:542) igt_kms-DEBUG: display: SetPlane pipe A, plane 12, disabling (kms_vblank:542) igt_kms-DEBUG: display: SetProp plane A.12 "rotation" to 0x1/1 (kms_vblank:542) igt_kms-DEBUG: display: SetProp plane A.12 "alpha" to 0xffff/65535 (kms_vblank:542) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:542) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 13 (kms_vblank:542) igt_kms-DEBUG: display: SetPlane pipe A, plane 13, disabling (kms_vblank:542) igt_kms-DEBUG: display: SetProp plane A.13 "rotation" to 0x1/1 (kms_vblank:542) igt_kms-DEBUG: display: SetProp plane A.13 "alpha" to 0xffff/65535 (kms_vblank:542) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:542) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 14 (kms_vblank:542) igt_kms-DEBUG: display: SetPlane pipe A, plane 14, disabling (kms_vblank:542) igt_kms-DEBUG: display: SetProp plane A.14 "rotation" to 0x1/1 (kms_vblank:542) igt_kms-DEBUG: display: SetProp plane A.14 "alpha" to 0xffff/65535 (kms_vblank:542) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:542) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 15 (kms_vblank:542) igt_kms-DEBUG: display: SetPlane pipe A, plane 15, disabling (kms_vblank:542) igt_kms-DEBUG: display: SetProp plane A.15 "rotation" to 0x1/1 (kms_vblank:542) igt_kms-DEBUG: display: SetProp plane A.15 "alpha" to 0xffff/65535 (kms_vblank:542) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:542) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 16 (kms_vblank:542) igt_kms-DEBUG: display: SetPlane pipe A, plane 16, disabling (kms_vblank:542) igt_kms-DEBUG: display: SetProp plane A.16 "rotation" to 0x1/1 (kms_vblank:542) igt_kms-DEBUG: display: SetProp plane A.16 "alpha" to 0xffff/65535 (kms_vblank:542) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:542) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 17 (kms_vblank:542) igt_kms-DEBUG: display: SetCursor pipe A, disabling (kms_vblank:542) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0) (kms_vblank:542) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:542) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 0 (kms_vblank:542) igt_kms-DEBUG: display: SetCrtc pipe B, disabling (kms_vblank:542) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:542) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 17 (kms_vblank:542) igt_kms-DEBUG: display: SetCursor pipe B, disabling (kms_vblank:542) igt_kms-DEBUG: display: MoveCursor pipe B, (0, 0) (kms_vblank:542) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:542) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 0 (kms_vblank:542) igt_kms-DEBUG: display: SetCrtc pipe C, disabling (kms_vblank:542) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:542) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 17 (kms_vblank:542) igt_kms-DEBUG: display: SetCursor pipe C, disabling (kms_vblank:542) igt_kms-DEBUG: display: MoveCursor pipe C, (0, 0) (kms_vblank:542) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && pla<14>[ 87.078722] [IGT] kms_vblank: finished subtest pipe-A-Writeback-1, FAIL ne_idx <<14>[ 87.078862] [IGT] kms_vblank: finished subtest query-forked, FAIL pipe->n<14>[ 87.080260] [IGT] kms_vblank: exiting, ret=98 _planes (kms_vblank:542) igt_kms-DEBUG: display<8>[ 87.101272] : Fixing up initial rotation pipe D, plane 0 (kms_vblank:542) igt_kms-DEBUG: display: SetCrtc pipe D, disabling (kms_vblank:542) igt_kms-DEBUG: Test requirement passed: plane_idx >= <14>[ 87.123683] [IGT] kms_vblank: executing 0 && plane_idx < pipe->n_planes (kms_vblank:542) igt_kms-DEBUG: display: Fixing up <14>[ 87.138075] [IGT] kms_vblank: starting subtest query-forked-hang initial <14>[ 87.138206] [IGT] kms_vblank: finished subtest query-forked-hang, SKIP rotation<14>[ 87.138360] [IGT] kms_vblank: exiting, ret=77 pipe D,<8>[ 87.143515] plane 17 (kms_vblank:542) igt_kms-DEBUG: displ<14>[ 87.167690] [IGT] kms_vblank: executing ay: SetCursor pipe D, disabling (kms_vblank:542) igt_kms-DEBUG: display: MoveCu<14>[ 87.182390] [IGT] kms_vblank: starting subtest query-busy rsor pip<14>[ 87.182793] [IGT] kms_vblank: starting dynamic subtest pipe-A-Writeback-1 e D, (0, 0) (kms_vblank:542) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:542) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 0 (kms_vblank:542) igt_kms-DEBUG: display: SetCrtc pipe E, disabling (kms_vblank:542) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:542) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 17 (kms_vblank:542) igt_kms-DEBUG: display: SetCursor pipe E, disabling (kms_vblank:542) igt_kms-DEBUG: display: MoveCursor pipe E, (0, 0) (kms_vblank:542) igt_kms-DEBUG: display: } (kms_vblank:542) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:542) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:542) igt_kms-CRITICAL: Last errno: 16, Device or resource busy (kms_vblank:542) igt_core-INFO: Stack trace: (kms_vblank:542) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_vblank:542) igt_core-INFO: #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() (kms_vblank:542) igt_core-INFO: #2 [+0xe77e1f94] (kms_vblank:542) igt_core-INFO: #3 [+0xe77e2fa0] (kms_vblank:542) igt_core-INFO: #4 [+0xe77e31bc] (kms_vblank:542) igt_core-INFO: #5 [+0xe77e1c78] (kms_vblank:542) igt_core-INFO: #6 [__libc_init_first+0x80] (kms_vblank:542) igt_core-INFO: #7 [__libc_start_main+0x98] (kms_vblank:542) igt_core-INFO: #8 [+0xe77e1cb0] **** END **** Dynamic subtest pipe-A-Writeback-1: FAIL (3.734s) Subtest query-forked: FAIL (3.734s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305785 for randomisation Opened device: /dev/dri/card0 Starting subtest: query-forked-hang Test requirement not met in function gem_context_require_bannable, file ../lib/i915/gem_context.c:324: Test requirement: has_ban_period || has_bannable Last errno: 22, Invalid argument Subtest query-forked-hang: SKIP (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305785 for randomisation Opened device: /dev/dri/card0 Starting subtest: query-busy Starting dynamic subtest: pipe-A-Writeback-1 (kms_vblank:548) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:548) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:548) igt_kms-CRITICAL: Last errno: 16, Device or resource busy Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() #2 [+0xc2961f94] #3 [+0xc2962fa0] #4 [+0xc29631bc] #5 [+0xc2961c78] #6 [__libc_init_first+0x80] #7 [__libc_start_main+0x98] #8 [+0xc2961cb0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** (kms_vblank:548) igt_kms-DEBUG: display: SetProp plane A.4 "rotation" to 0x1/1 (kms_vblank:548) igt_kms-DEBUG: display: SetProp plane A.4 "alpha" to 0xffff/65535 (kms_vblank:548) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:548) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 5 (kms_vblank:548) igt_kms-DEBUG: display: SetPlane pipe A, plane 5, disabling (kms_vblank:548) igt_kms-DEBUG: display: SetProp plane A.5 "rotation" to 0x1/1 (kms_vblank:548) igt_kms-DEBUG: display: SetProp plane A.5 "alpha" to 0xffff/65535 (kms_vblank:548) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:548) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 6 (kms_vblank:548) igt_kms-DEBUG: display: SetPlane pipe A, plane 6, disabling (kms_vblank:548) igt_kms-DEBUG: display: SetProp plane A.6 "rotation" to 0x1/1 (kms_vblank:548) igt_kms-DEBUG: display: SetProp plane A.6 "alpha" to 0xffff/65535 (kms_vblank:548) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:548) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 7 (kms_vblank:548) igt_kms-DEBUG: display: SetPlane pipe A, plane 7, disabling (kms_vblank:548) igt_kms-DEBUG: display: SetProp plane A.7 "rotation" to 0x1/1 (kms_vblank:548) igt_kms-DEBUG: display: SetProp plane A.7 "alpha" to 0xffff/65535 (kms_vblank:548) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:548) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 8 (kms_vblank:548) igt_kms-DEBUG: display: SetPlane pipe A, plane 8, disabling (kms_vblank:548) igt_kms-DEBUG: display: SetProp plane A.8 "rotation" to 0x1/1 (kms_vblank:548) igt_kms-DEBUG: display: SetProp plane A.8 "alpha" to 0xffff/65535 (kms_vblank:548) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:548) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 9 (kms_vblank:548) igt_kms-DEBUG: display: SetPlane pipe A, plane 9, disabling (kms_vblank:548) igt_kms-DEBUG: display: SetProp plane A.9 "rotation" to 0x1/1 (kms_vblank:548) igt_kms-DEBUG: display: SetProp plane A.9 "alpha" to 0xffff/65535 (kms_vblank:548) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:548) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 10 (kms_vblank:548) igt_kms-DEBUG: display: SetPlane pipe A, plane 10, disabling (kms_vblank:548) igt_kms-DEBUG: display: SetProp plane A.10 "rotation" to 0x1/1 (kms_vblank:548) igt_kms-DEBUG: display: SetProp plane A.10 "alpha" to 0xffff/65535 (kms_vblank:548) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:548) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 11 (kms_vblank:548) igt_kms-DEBUG: display: SetPlane pipe A, plane 11, disabling (kms_vblank:548) igt_kms-DEBUG: display: SetProp plane A.11 "rotation" to 0x1/1 (kms_vblank:548) igt_kms-DEBUG: display: SetProp plane A.11 "alpha" to 0xffff/65535 (kms_vblank:548) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:548) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 12 (kms_vblank:548) igt_kms-DEBUG: display: SetPlane pipe A, plane 12, disabling (kms_vblank:548) igt_kms-DEBUG: display: SetProp plane A.12 "rotation" to 0x1/1 (kms_vblank:548) igt_kms-DEBUG: display: SetProp plane A.12 "alpha" to 0xffff/65535 (kms_vblank:548) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:548) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 13 (kms_vblank:548) igt_kms-DEBUG: display: SetPlane pipe A, plane 13, disabling (kms_vblank:548) igt_kms-DEBUG: display: SetProp plane A.13 "rotation" to 0x1/1 (kms_vblank:548) igt_kms-DEBUG: display: SetProp plane A.13 "alpha" to 0xffff/65535 (kms_vblank:548) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:548) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 14 (kms_vblank:548) igt_kms-DEBUG: display: SetPlane pipe A, plane 14, disabling (kms_vblank:548) igt_kms-DEBUG: display: SetProp plane A.14 "rotation" to 0x1/1 (kms_vblank:548) igt_kms-DEBUG: display: SetProp plane A.14 "alpha" to 0xffff/65535 (kms_vblank:548) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:548) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 15 (kms_vblank:548) igt_kms-DEBUG: display: SetPlane pipe A, plane 15, disabling (kms_vblank:548) igt_kms-DEBUG: display: SetProp plane A.15 "rotation" to 0x1/1 (kms_vblank:548) igt_kms-DEBUG: display: SetProp plane A.15 "alpha" to 0xffff/65535 (kms_vblank:548) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:548) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 16 (kms_vblank:548) igt_kms-DEBUG: display: SetPlane pipe A, plane 16, disabling (kms_vblank:548) igt_kms-DEBUG: display: SetProp plane A.16 "rotation" to 0x1/1 (kms_vblank:548) igt_kms-DEBUG: display: SetProp plane A.16 "alpha" to 0xffff/65535 (kms_vblank:548) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:548) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 17 (kms_vblank:548) igt_kms-DEBUG: display: SetCursor pipe A, disabling (kms_vblank:548) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0) (kms_vblank:548) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:548) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 0 (kms_vblank:548) igt_kms-DEBUG: display: SetCrtc pipe B, disabling (kms_vblank:548) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:548) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 17 (kms_vblank:548) igt_kms-DEBUG: display: SetCursor pipe B, disabling (kms_vblank:548) igt_kms-DEBUG: display: MoveCursor pipe B, (0, 0) (kms_vblank:548) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:548) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 0 (kms_vblank:548) igt_kms-DEBUG: display: SetCrtc pipe C, disabling (kms_vblank:548) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:548) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 17 (kms_vblank:548) igt_kms-DEBUG: display: SetCursor pipe C, disabling (kms_vblank:548) igt_kms-DEBUG: display: MoveCursor pipe C, (0, 0) (kms_vblank:548) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:548) igt_km<14>[ 90.919597] [IGT] kms_vblank: finished subtest pipe-A-Writeback-1, FAIL s-DEBUG:<14>[ 90.919741] [IGT] kms_vblank: finished subtest query-busy, FAIL display<14>[ 90.921016] [IGT] kms_vblank: exiting, ret=98 : Fi<8>[ 90.927954] xing up initial rotation pipe D, plane 0 (kms_v<14>[ 90.951374] [IGT] kms_vblank: executing blank:548) igt_kms-DEBUG: display: SetCrtc pipe D, disabling (kms_vblank:548) igt_k<14>[ 90.966044] [IGT] kms_vblank: starting subtest query-busy-hang ms-DEBUG<14>[ 90.966179] [IGT] kms_vblank: finished subtest query-busy-hang, SKIP : Test r<14>[ 90.966343] [IGT] kms_vblank: exiting, ret=77 equireme<8>[ 90.972467] nt passed: plane<14>[ 90.994817] [IGT] kms_vblank: executing _idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:548) igt_kms-DEBUG: display: Fixing up initial rotation pipe D, plane 1<14>[ 91.010398] [IGT] kms_vblank: starting subtest query-forked-busy 7 (kms_<14>[ 91.010795] [IGT] kms_vblank: starting dynamic subtest pipe-A-Writeback-1 vblank:548) igt_kms-DEBUG: display: SetCursor pipe D, disabling (kms_vblank:548) igt_kms-DEBUG: display: MoveCursor pipe D, (0, 0) (kms_vblank:548) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:548) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 0 (kms_vblank:548) igt_kms-DEBUG: display: SetCrtc pipe E, disabling (kms_vblank:548) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:548) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 17 (kms_vblank:548) igt_kms-DEBUG: display: SetCursor pipe E, disabling (kms_vblank:548) igt_kms-DEBUG: display: MoveCursor pipe E, (0, 0) (kms_vblank:548) igt_kms-DEBUG: display: } (kms_vblank:548) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:548) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:548) igt_kms-CRITICAL: Last errno: 16, Device or resource busy (kms_vblank:548) igt_core-INFO: Stack trace: (kms_vblank:548) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_vblank:548) igt_core-INFO: #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() (kms_vblank:548) igt_core-INFO: #2 [+0xc2961f94] (kms_vblank:548) igt_core-INFO: #3 [+0xc2962fa0] (kms_vblank:548) igt_core-INFO: #4 [+0xc29631bc] (kms_vblank:548) igt_core-INFO: #5 [+0xc2961c78] (kms_vblank:548) igt_core-INFO: #6 [__libc_init_first+0x80] (kms_vblank:548) igt_core-INFO: #7 [__libc_start_main+0x98] (kms_vblank:548) igt_core-INFO: #8 [+0xc2961cb0] **** END **** Dynamic subtest pipe-A-Writeback-1: FAIL (3.737s) Subtest query-busy: FAIL (3.737s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305789 for randomisation Opened device: /dev/dri/card0 Starting subtest: query-busy-hang Test requirement not met in function gem_context_require_bannable, file ../lib/i915/gem_context.c:324: Test requirement: has_ban_period || has_bannable Last errno: 22, Invalid argument Subtest query-busy-hang: SKIP (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305789 for randomisation Opened device: /dev/dri/card0 Starting subtest: query-forked-busy Starting dynamic subtest: pipe-A-Writeback-1 (kms_vblank:554) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:554) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:554) igt_kms-CRITICAL: Last errno: 16, Device or resource busy Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() #2 [+0xe3c61f94] #3 [+0xe3c62fa0] #4 [+0xe3c631bc] #5 [+0xe3c61c78] #6 [__libc_init_first+0x80] #7 [__libc_start_main+0x98] #8 [+0xe3c61cb0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** (kms_vblank:554) igt_kms-DEBUG: display: SetProp plane A.4 "rotation" to 0x1/1 (kms_vblank:554) igt_kms-DEBUG: display: SetProp plane A.4 "alpha" to 0xffff/65535 (kms_vblank:554) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:554) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 5 (kms_vblank:554) igt_kms-DEBUG: display: SetPlane pipe A, plane 5, disabling (kms_vblank:554) igt_kms-DEBUG: display: SetProp plane A.5 "rotation" to 0x1/1 (kms_vblank:554) igt_kms-DEBUG: display: SetProp plane A.5 "alpha" to 0xffff/65535 (kms_vblank:554) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:554) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 6 (kms_vblank:554) igt_kms-DEBUG: display: SetPlane pipe A, plane 6, disabling (kms_vblank:554) igt_kms-DEBUG: display: SetProp plane A.6 "rotation" to 0x1/1 (kms_vblank:554) igt_kms-DEBUG: display: SetProp plane A.6 "alpha" to 0xffff/65535 (kms_vblank:554) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:554) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 7 (kms_vblank:554) igt_kms-DEBUG: display: SetPlane pipe A, plane 7, disabling (kms_vblank:554) igt_kms-DEBUG: display: SetProp plane A.7 "rotation" to 0x1/1 (kms_vblank:554) igt_kms-DEBUG: display: SetProp plane A.7 "alpha" to 0xffff/65535 (kms_vblank:554) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:554) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 8 (kms_vblank:554) igt_kms-DEBUG: display: SetPlane pipe A, plane 8, disabling (kms_vblank:554) igt_kms-DEBUG: display: SetProp plane A.8 "rotation" to 0x1/1 (kms_vblank:554) igt_kms-DEBUG: display: SetProp plane A.8 "alpha" to 0xffff/65535 (kms_vblank:554) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:554) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 9 (kms_vblank:554) igt_kms-DEBUG: display: SetPlane pipe A, plane 9, disabling (kms_vblank:554) igt_kms-DEBUG: display: SetProp plane A.9 "rotation" to 0x1/1 (kms_vblank:554) igt_kms-DEBUG: display: SetProp plane A.9 "alpha" to 0xffff/65535 (kms_vblank:554) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:554) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 10 (kms_vblank:554) igt_kms-DEBUG: display: SetPlane pipe A, plane 10, disabling (kms_vblank:554) igt_kms-DEBUG: display: SetProp plane A.10 "rotation" to 0x1/1 (kms_vblank:554) igt_kms-DEBUG: display: SetProp plane A.10 "alpha" to 0xffff/65535 (kms_vblank:554) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:554) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 11 (kms_vblank:554) igt_kms-DEBUG: display: SetPlane pipe A, plane 11, disabling (kms_vblank:554) igt_kms-DEBUG: display: SetProp plane A.11 "rotation" to 0x1/1 (kms_vblank:554) igt_kms-DEBUG: display: SetProp plane A.11 "alpha" to 0xffff/65535 (kms_vblank:554) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:554) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 12 (kms_vblank:554) igt_kms-DEBUG: display: SetPlane pipe A, plane 12, disabling (kms_vblank:554) igt_kms-DEBUG: display: SetProp plane A.12 "rotation" to 0x1/1 (kms_vblank:554) igt_kms-DEBUG: display: SetProp plane A.12 "alpha" to 0xffff/65535 (kms_vblank:554) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:554) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 13 (kms_vblank:554) igt_kms-DEBUG: display: SetPlane pipe A, plane 13, disabling (kms_vblank:554) igt_kms-DEBUG: display: SetProp plane A.13 "rotation" to 0x1/1 (kms_vblank:554) igt_kms-DEBUG: display: SetProp plane A.13 "alpha" to 0xffff/65535 (kms_vblank:554) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:554) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 14 (kms_vblank:554) igt_kms-DEBUG: display: SetPlane pipe A, plane 14, disabling (kms_vblank:554) igt_kms-DEBUG: display: SetProp plane A.14 "rotation" to 0x1/1 (kms_vblank:554) igt_kms-DEBUG: display: SetProp plane A.14 "alpha" to 0xffff/65535 (kms_vblank:554) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:554) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 15 (kms_vblank:554) igt_kms-DEBUG: display: SetPlane pipe A, plane 15, disabling (kms_vblank:554) igt_kms-DEBUG: display: SetProp plane A.15 "rotation" to 0x1/1 (kms_vblank:554) igt_kms-DEBUG: display: SetProp plane A.15 "alpha" to 0xffff/65535 (kms_vblank:554) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:554) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 16 (kms_vblank:554) igt_kms-DEBUG: display: SetPlane pipe A, plane 16, disabling (kms_vblank:554) igt_kms-DEBUG: display: SetProp plane A.16 "rotation" to 0x1/1 (kms_vblank:554) igt_kms-DEBUG: display: SetProp plane A.16 "alpha" to 0xffff/65535 (kms_vblank:554) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:554) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 17 (kms_vblank:554) igt_kms-DEBUG: display: SetCursor pipe A, disabling (kms_vblank:554) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0) (kms_vblank:554) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:554) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 0 (kms_vblank:554) igt_kms-DEBUG: display: SetCrtc pipe B, disabling (kms_vblank:554) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:554) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 17 (kms_vblank:554) igt_kms-DEBUG: display: SetCursor pipe B, disabling (kms_vblank:554) igt_kms-DEBUG: display: MoveCursor pipe B, (0, 0) (kms_vblank:554) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:554) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 0 (kms_vblank:554) igt_kms-DEBUG: display: SetCrtc pipe C, disabling (kms_vblank:554) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:554) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 17 (kms_vblank:554) igt_kms-DEBUG: display: SetCursor pipe C, disabling (kms_vblank:554) igt_kms-DEBUG: display: MoveCursor pipe C, (0, 0) (kms_vblank:554) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && pla<14>[ 94.758846] [IGT] kms_vblank: finished subtest pipe-A-Writeback-1, FAIL ne_idx <<14>[ 94.758987] [IGT] kms_vblank: finished subtest query-forked-busy, FAIL pipe->n<14>[ 94.760317] [IGT] kms_vblank: exiting, ret=98 _planes (kms_vblank:554) igt_kms-DEBUG:<8>[ 94.781907] display: Fixing up initial rotation pipe D, plane 0 (kms_vblank:554) igt_kms-DEBUG: display: SetCrtc pipe D, disabling (kms_vblank:554) igt_kms-DEBUG: Test requirement passed: plane<14>[ 94.803590] [IGT] kms_vblank: executing _idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:554) igt_kms-DEBUG: display: Fi<14>[ 94.818006] [IGT] kms_vblank: starting subtest query-forked-busy-hang xing up <14>[ 94.818136] [IGT] kms_vblank: finished subtest query-forked-busy-hang, SKIP initial <14>[ 94.818293] [IGT] kms_vblank: exiting, ret=77 rotation<8>[ 94.823468] pipe D,<14>[ 94.840561] [IGT] kms_vblank: executing plane 17 (kms_vblank:554) igt_kms-DEBUG: display: SetCursor pipe D, disabling (kms_vblank:554) igt_kms-DEBUG: display: MoveCursor pipe D, (0, 0) (kms_vblank:554) igt_kms-DEBUG: Test requir<14>[ 94.867806] [IGT] kms_vblank: starting subtest wait-idle ement pa<14>[ 94.868157] [IGT] kms_vblank: starting dynamic subtest pipe-A-Writeback-1 ssed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:554) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 0 (kms_vblank:554) igt_kms-DEBUG: display: SetCrtc pipe E, disabling (kms_vblank:554) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:554) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 17 (kms_vblank:554) igt_kms-DEBUG: display: SetCursor pipe E, disabling (kms_vblank:554) igt_kms-DEBUG: display: MoveCursor pipe E, (0, 0) (kms_vblank:554) igt_kms-DEBUG: display: } (kms_vblank:554) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:554) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:554) igt_kms-CRITICAL: Last errno: 16, Device or resource busy (kms_vblank:554) igt_core-INFO: Stack trace: (kms_vblank:554) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_vblank:554) igt_core-INFO: #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() (kms_vblank:554) igt_core-INFO: #2 [+0xe3c61f94] (kms_vblank:554) igt_core-INFO: #3 [+0xe3c62fa0] (kms_vblank:554) igt_core-INFO: #4 [+0xe3c631bc] (kms_vblank:554) igt_core-INFO: #5 [+0xe3c61c78] (kms_vblank:554) igt_core-INFO: #6 [__libc_init_first+0x80] (kms_vblank:554) igt_core-INFO: #7 [__libc_start_main+0x98] (kms_vblank:554) igt_core-INFO: #8 [+0xe3c61cb0] **** END **** Dynamic subtest pipe-A-Writeback-1: FAIL (3.748s) Subtest query-forked-busy: FAIL (3.748s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305792 for randomisation Opened device: /dev/dri/card0 Starting subtest: query-forked-busy-hang Test requirement not met in function gem_context_require_bannable, file ../lib/i915/gem_context.c:324: Test requirement: has_ban_period || has_bannable Last errno: 22, Invalid argument Subtest query-forked-busy-hang: SKIP (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305792 for randomisation Opened device: /dev/dri/card0 Starting subtest: wait-idle Starting dynamic subtest: pipe-A-Writeback-1 (kms_vblank:560) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:560) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:560) igt_kms-CRITICAL: Last errno: 16, Device or resource busy Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() #2 [+0xe0031f94] #3 [+0xe0032fa0] #4 [+0xe00331bc] #5 [+0xe0031c78] #6 [__libc_init_first+0x80] #7 [__libc_start_main+0x98] #8 [+0xe0031cb0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** (kms_vblank:560) igt_kms-DEBUG: display: SetProp plane A.4 "rotation" to 0x1/1 (kms_vblank:560) igt_kms-DEBUG: display: SetProp plane A.4 "alpha" to 0xffff/65535 (kms_vblank:560) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:560) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 5 (kms_vblank:560) igt_kms-DEBUG: display: SetPlane pipe A, plane 5, disabling (kms_vblank:560) igt_kms-DEBUG: display: SetProp plane A.5 "rotation" to 0x1/1 (kms_vblank:560) igt_kms-DEBUG: display: SetProp plane A.5 "alpha" to 0xffff/65535 (kms_vblank:560) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:560) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 6 (kms_vblank:560) igt_kms-DEBUG: display: SetPlane pipe A, plane 6, disabling (kms_vblank:560) igt_kms-DEBUG: display: SetProp plane A.6 "rotation" to 0x1/1 (kms_vblank:560) igt_kms-DEBUG: display: SetProp plane A.6 "alpha" to 0xffff/65535 (kms_vblank:560) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:560) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 7 (kms_vblank:560) igt_kms-DEBUG: display: SetPlane pipe A, plane 7, disabling (kms_vblank:560) igt_kms-DEBUG: display: SetProp plane A.7 "rotation" to 0x1/1 (kms_vblank:560) igt_kms-DEBUG: display: SetProp plane A.7 "alpha" to 0xffff/65535 (kms_vblank:560) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:560) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 8 (kms_vblank:560) igt_kms-DEBUG: display: SetPlane pipe A, plane 8, disabling (kms_vblank:560) igt_kms-DEBUG: display: SetProp plane A.8 "rotation" to 0x1/1 (kms_vblank:560) igt_kms-DEBUG: display: SetProp plane A.8 "alpha" to 0xffff/65535 (kms_vblank:560) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:560) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 9 (kms_vblank:560) igt_kms-DEBUG: display: SetPlane pipe A, plane 9, disabling (kms_vblank:560) igt_kms-DEBUG: display: SetProp plane A.9 "rotation" to 0x1/1 (kms_vblank:560) igt_kms-DEBUG: display: SetProp plane A.9 "alpha" to 0xffff/65535 (kms_vblank:560) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:560) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 10 (kms_vblank:560) igt_kms-DEBUG: display: SetPlane pipe A, plane 10, disabling (kms_vblank:560) igt_kms-DEBUG: display: SetProp plane A.10 "rotation" to 0x1/1 (kms_vblank:560) igt_kms-DEBUG: display: SetProp plane A.10 "alpha" to 0xffff/65535 (kms_vblank:560) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:560) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 11 (kms_vblank:560) igt_kms-DEBUG: display: SetPlane pipe A, plane 11, disabling (kms_vblank:560) igt_kms-DEBUG: display: SetProp plane A.11 "rotation" to 0x1/1 (kms_vblank:560) igt_kms-DEBUG: display: SetProp plane A.11 "alpha" to 0xffff/65535 (kms_vblank:560) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:560) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 12 (kms_vblank:560) igt_kms-DEBUG: display: SetPlane pipe A, plane 12, disabling (kms_vblank:560) igt_kms-DEBUG: display: SetProp plane A.12 "rotation" to 0x1/1 (kms_vblank:560) igt_kms-DEBUG: display: SetProp plane A.12 "alpha" to 0xffff/65535 (kms_vblank:560) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:560) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 13 (kms_vblank:560) igt_kms-DEBUG: display: SetPlane pipe A, plane 13, disabling (kms_vblank:560) igt_kms-DEBUG: display: SetProp plane A.13 "rotation" to 0x1/1 (kms_vblank:560) igt_kms-DEBUG: display: SetProp plane A.13 "alpha" to 0xffff/65535 (kms_vblank:560) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:560) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 14 (kms_vblank:560) igt_kms-DEBUG: display: SetPlane pipe A, plane 14, disabling (kms_vblank:560) igt_kms-DEBUG: display: SetProp plane A.14 "rotation" to 0x1/1 (kms_vblank:560) igt_kms-DEBUG: display: SetProp plane A.14 "alpha" to 0xffff/65535 (kms_vblank:560) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:560) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 15 (kms_vblank:560) igt_kms-DEBUG: display: SetPlane pipe A, plane 15, disabling (kms_vblank:560) igt_kms-DEBUG: display: SetProp plane A.15 "rotation" to 0x1/1 (kms_vblank:560) igt_kms-DEBUG: display: SetProp plane A.15 "alpha" to 0xffff/65535 (kms_vblank:560) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:560) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 16 (kms_vblank:560) igt_kms-DEBUG: display: SetPlane pipe A, plane 16, disabling (kms_vblank:560) igt_kms-DEBUG: display: SetProp plane A.16 "rotation" to 0x1/1 (kms_vblank:560) igt_kms-DEBUG: display: SetProp plane A.16 "alpha" to 0xffff/65535 (kms_vblank:560) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:560) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 17 (kms_vblank:560) igt_kms-DEBUG: display: SetCursor pipe A, disabling (kms_vblank:560) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0) (kms_vblank:560) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:560) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 0 (kms_vblank:560) igt_kms-DEBUG: display: SetCrtc pipe B, disabling (kms_vblank:560) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:560) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 17 (kms_vblank:560) igt_kms-DEBUG: display: SetCursor pipe B, disabling (kms_vblank:560) igt_kms-DEBUG: display: MoveCursor pipe B, (0, 0) (kms_vblank:560) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:560) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 0 (kms_vblank:560) igt_kms-DEBUG: display: SetCrtc pipe C, disabling (kms_vblank:560) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:560) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 17 (kms_vblank:560) igt_kms-DEBUG: display: SetCursor pipe C, disabling (kms_vblank:560) igt_kms-DEBUG: display: MoveCursor pipe C, (0, 0) (kms_vblank:560) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && pla<14>[ 98.598509] [IGT] kms_vblank: finished subtest pipe-A-Writeback-1, FAIL ne_idx <<14>[ 98.598587] [IGT] kms_vblank: finished subtest wait-idle, FAIL pipe->n<14>[ 98.599937] [IGT] kms_vblank: exiting, ret=98 _planes (kms_vblank:560) igt_kms-DEBUG: display<8>[ 98.620440] : Fixing up initial rotation pipe D, plane 0 (kms_vblank:560) igt_kms-DEBUG: display: SetCrtc pipe D, disabling (kms_vblank:560) igt_kms-DEBUG<14>[ 98.641108] [IGT] kms_vblank: executing : Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:560) igt_kms-DEBUG: display: Fixing up initial <14>[ 98.655583] [IGT] kms_vblank: starting subtest wait-idle-hang rotation<14>[ 98.655715] [IGT] kms_vblank: finished subtest wait-idle-hang, SKIP pipe D,<14>[ 98.655865] [IGT] kms_vblank: exiting, ret=77 plane 1<8>[ 98.661045] 7 (kms_<14>[ 98.687026] [IGT] kms_vblank: executing vblank:560) igt_kms-DEBUG: display: SetCursor pipe D, disabling (kms_vblank:560) igt_kms-DEBUG: display: MoveCursor pipe D, (0, 0) (kms_vblank:560) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_id<14>[ 98.707503] [IGT] kms_vblank: starting subtest wait-forked x < pipe<14>[ 98.707903] [IGT] kms_vblank: starting dynamic subtest pipe-A-Writeback-1 ->n_planes (kms_vblank:560) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 0 (kms_vblank:560) igt_kms-DEBUG: display: SetCrtc pipe E, disabling (kms_vblank:560) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:560) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 17 (kms_vblank:560) igt_kms-DEBUG: display: SetCursor pipe E, disabling (kms_vblank:560) igt_kms-DEBUG: display: MoveCursor pipe E, (0, 0) (kms_vblank:560) igt_kms-DEBUG: display: } (kms_vblank:560) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:560) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:560) igt_kms-CRITICAL: Last errno: 16, Device or resource busy (kms_vblank:560) igt_core-INFO: Stack trace: (kms_vblank:560) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_vblank:560) igt_core-INFO: #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() (kms_vblank:560) igt_core-INFO: #2 [+0xe0031f94] (kms_vblank:560) igt_core-INFO: #3 [+0xe0032fa0] (kms_vblank:560) igt_core-INFO: #4 [+0xe00331bc] (kms_vblank:560) igt_core-INFO: #5 [+0xe0031c78] (kms_vblank:560) igt_core-INFO: #6 [__libc_init_first+0x80] (kms_vblank:560) igt_core-INFO: #7 [__libc_start_main+0x98] (kms_vblank:560) igt_core-INFO: #8 [+0xe0031cb0] **** END **** Dynamic subtest pipe-A-Writeback-1: FAIL (3.730s) Subtest wait-idle: FAIL (3.731s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305796 for randomisation Opened device: /dev/dri/card0 Starting subtest: wait-idle-hang Test requirement not met in function gem_context_require_bannable, file ../lib/i915/gem_context.c:324: Test requirement: has_ban_period || has_bannable Last errno: 22, Invalid argument Subtest wait-idle-hang: SKIP (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305796 for randomisation Opened device: /dev/dri/card0 Starting subtest: wait-forked Starting dynamic subtest: pipe-A-Writeback-1 (kms_vblank:566) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:566) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:566) igt_kms-CRITICAL: Last errno: 16, Device or resource busy Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() #2 [+0xda5c1f94] #3 [+0xda5c2fa0] #4 [+0xda5c31bc] #5 [+0xda5c1c78] #6 [__libc_init_first+0x80] #7 [__libc_start_main+0x98] #8 [+0xda5c1cb0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** (kms_vblank:566) igt_kms-DEBUG: display: SetProp plane A.4 "rotation" to 0x1/1 (kms_vblank:566) igt_kms-DEBUG: display: SetProp plane A.4 "alpha" to 0xffff/65535 (kms_vblank:566) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:566) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 5 (kms_vblank:566) igt_kms-DEBUG: display: SetPlane pipe A, plane 5, disabling (kms_vblank:566) igt_kms-DEBUG: display: SetProp plane A.5 "rotation" to 0x1/1 (kms_vblank:566) igt_kms-DEBUG: display: SetProp plane A.5 "alpha" to 0xffff/65535 (kms_vblank:566) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:566) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 6 (kms_vblank:566) igt_kms-DEBUG: display: SetPlane pipe A, plane 6, disabling (kms_vblank:566) igt_kms-DEBUG: display: SetProp plane A.6 "rotation" to 0x1/1 (kms_vblank:566) igt_kms-DEBUG: display: SetProp plane A.6 "alpha" to 0xffff/65535 (kms_vblank:566) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:566) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 7 (kms_vblank:566) igt_kms-DEBUG: display: SetPlane pipe A, plane 7, disabling (kms_vblank:566) igt_kms-DEBUG: display: SetProp plane A.7 "rotation" to 0x1/1 (kms_vblank:566) igt_kms-DEBUG: display: SetProp plane A.7 "alpha" to 0xffff/65535 (kms_vblank:566) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:566) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 8 (kms_vblank:566) igt_kms-DEBUG: display: SetPlane pipe A, plane 8, disabling (kms_vblank:566) igt_kms-DEBUG: display: SetProp plane A.8 "rotation" to 0x1/1 (kms_vblank:566) igt_kms-DEBUG: display: SetProp plane A.8 "alpha" to 0xffff/65535 (kms_vblank:566) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:566) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 9 (kms_vblank:566) igt_kms-DEBUG: display: SetPlane pipe A, plane 9, disabling (kms_vblank:566) igt_kms-DEBUG: display: SetProp plane A.9 "rotation" to 0x1/1 (kms_vblank:566) igt_kms-DEBUG: display: SetProp plane A.9 "alpha" to 0xffff/65535 (kms_vblank:566) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:566) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 10 (kms_vblank:566) igt_kms-DEBUG: display: SetPlane pipe A, plane 10, disabling (kms_vblank:566) igt_kms-DEBUG: display: SetProp plane A.10 "rotation" to 0x1/1 (kms_vblank:566) igt_kms-DEBUG: display: SetProp plane A.10 "alpha" to 0xffff/65535 (kms_vblank:566) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:566) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 11 (kms_vblank:566) igt_kms-DEBUG: display: SetPlane pipe A, plane 11, disabling (kms_vblank:566) igt_kms-DEBUG: display: SetProp plane A.11 "rotation" to 0x1/1 (kms_vblank:566) igt_kms-DEBUG: display: SetProp plane A.11 "alpha" to 0xffff/65535 (kms_vblank:566) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:566) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 12 (kms_vblank:566) igt_kms-DEBUG: display: SetPlane pipe A, plane 12, disabling (kms_vblank:566) igt_kms-DEBUG: display: SetProp plane A.12 "rotation" to 0x1/1 (kms_vblank:566) igt_kms-DEBUG: display: SetProp plane A.12 "alpha" to 0xffff/65535 (kms_vblank:566) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:566) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 13 (kms_vblank:566) igt_kms-DEBUG: display: SetPlane pipe A, plane 13, disabling (kms_vblank:566) igt_kms-DEBUG: display: SetProp plane A.13 "rotation" to 0x1/1 (kms_vblank:566) igt_kms-DEBUG: display: SetProp plane A.13 "alpha" to 0xffff/65535 (kms_vblank:566) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:566) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 14 (kms_vblank:566) igt_kms-DEBUG: display: SetPlane pipe A, plane 14, disabling (kms_vblank:566) igt_kms-DEBUG: display: SetProp plane A.14 "rotation" to 0x1/1 (kms_vblank:566) igt_kms-DEBUG: display: SetProp plane A.14 "alpha" to 0xffff/65535 (kms_vblank:566) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:566) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 15 (kms_vblank:566) igt_kms-DEBUG: display: SetPlane pipe A, plane 15, disabling (kms_vblank:566) igt_kms-DEBUG: display: SetProp plane A.15 "rotation" to 0x1/1 (kms_vblank:566) igt_kms-DEBUG: display: SetProp plane A.15 "alpha" to 0xffff/65535 (kms_vblank:566) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:566) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 16 (kms_vblank:566) igt_kms-DEBUG: display: SetPlane pipe A, plane 16, disabling (kms_vblank:566) igt_kms-DEBUG: display: SetProp plane A.16 "rotation" to 0x1/1 (kms_vblank:566) igt_kms-DEBUG: display: SetProp plane A.16 "alpha" to 0xffff/65535 (kms_vblank:566) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:566) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 17 (kms_vblank:566) igt_kms-DEBUG: display: SetCursor pipe A, disabling (kms_vblank:566) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0) (kms_vblank:566) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:566) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 0 (kms_vblank:566) igt_kms-DEBUG: display: SetCrtc pipe B, disabling (kms_vblank:566) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:566) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 17 (kms_vblank:566) igt_kms-DEBUG: display: SetCursor pipe B, disabling (kms_vblank:566) igt_kms-DEBUG: display: MoveCursor pipe B, (0, 0) (kms_vblank:566) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:566) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 0 (kms_vblank:566) igt_kms-DEBUG: display: SetCrtc pipe C, disabling (kms_vblank:566) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:566) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 17 (kms_vblank:566) igt_kms-DEBUG: display: SetCursor pipe C, disabling (kms_vblank:566) igt_kms-DEBUG: display: MoveCursor pipe C, (0, 0) (kms_vblank:566) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && pla<14>[ 102.438724] [IGT] kms_vblank: finished subtest pipe-A-Writeback-1, FAIL ne_idx <<14>[ 102.438862] [IGT] kms_vblank: finished subtest wait-forked, FAIL pipe->n<14>[ 102.440261] [IGT] kms_vblank: exiting, ret=98 _planes (kms_vblank:566) igt_kms-DEBUG: display<8>[ 102.461840] : Fixing up initial rotation pipe D, plane 0 (kms_vblank:566) igt_kms-DEBUG: display: SetCrtc pipe D, disabling (kms_vblank:566) igt_kms-DEBUG: Test requirement passed: plane_idx >= <14>[ 102.484265] [IGT] kms_vblank: executing 0 && plane_idx < pipe->n_planes (kms_vblank:566) igt_kms-DEBUG: display: Fixing up <14>[ 102.499268] [IGT] kms_vblank: starting subtest wait-forked-hang initial rotation pipe D,<14>[ 102.505972] [IGT] kms_vblank: finished subtest wait-forked-hang, SKIP plane 1<14>[ 102.506123] [IGT] kms_vblank: exiting, ret=77 7 (kms_<8>[ 102.510943] vblank:566) igt_kms-DEBUG: display: <14>[ 102.530465] [IGT] kms_vblank: executing SetCursor pipe D, disabling (kms_vblank:566) igt_kms-DEBUG: display: MoveCursor pipe D, (0, 0) (kms_vblank:566) igt_kms-DE<14>[ 102.545963] [IGT] kms_vblank: starting subtest wait-busy BUG: Tes<14>[ 102.546337] [IGT] kms_vblank: starting dynamic subtest pipe-A-Writeback-1 t requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:566) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 0 (kms_vblank:566) igt_kms-DEBUG: display: SetCrtc pipe E, disabling (kms_vblank:566) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:566) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 17 (kms_vblank:566) igt_kms-DEBUG: display: SetCursor pipe E, disabling (kms_vblank:566) igt_kms-DEBUG: display: MoveCursor pipe E, (0, 0) (kms_vblank:566) igt_kms-DEBUG: display: } (kms_vblank:566) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:566) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:566) igt_kms-CRITICAL: Last errno: 16, Device or resource busy (kms_vblank:566) igt_core-INFO: Stack trace: (kms_vblank:566) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_vblank:566) igt_core-INFO: #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() (kms_vblank:566) igt_core-INFO: #2 [+0xda5c1f94] (kms_vblank:566) igt_core-INFO: #3 [+0xda5c2fa0] (kms_vblank:566) igt_core-INFO: #4 [+0xda5c31bc] (kms_vblank:566) igt_core-INFO: #5 [+0xda5c1c78] (kms_vblank:566) igt_core-INFO: #6 [__libc_init_first+0x80] (kms_vblank:566) igt_core-INFO: #7 [__libc_start_main+0x98] (kms_vblank:566) igt_core-INFO: #8 [+0xda5c1cb0] **** END **** Dynamic subtest pipe-A-Writeback-1: FAIL (3.731s) Subtest wait-forked: FAIL (3.731s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305800 for randomisation Opened device: /dev/dri/card0 Starting subtest: wait-forked-hang Test requirement not met in function gem_context_require_bannable, file ../lib/i915/gem_context.c:324: Test requirement: has_ban_period || has_bannable Last errno: 22, Invalid argument Subtest wait-forked-hang: SKIP (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305800 for randomisation Opened device: /dev/dri/card0 Starting subtest: wait-busy Starting dynamic subtest: pipe-A-Writeback-1 (kms_vblank:572) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:572) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:572) igt_kms-CRITICAL: Last errno: 16, Device or resource busy Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() #2 [+0xbb8c1f94] #3 [+0xbb8c2fa0] #4 [+0xbb8c31bc] #5 [+0xbb8c1c78] #6 [__libc_init_first+0x80] #7 [__libc_start_main+0x98] #8 [+0xbb8c1cb0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** (kms_vblank:572) igt_kms-DEBUG: display: SetProp plane A.4 "rotation" to 0x1/1 (kms_vblank:572) igt_kms-DEBUG: display: SetProp plane A.4 "alpha" to 0xffff/65535 (kms_vblank:572) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:572) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 5 (kms_vblank:572) igt_kms-DEBUG: display: SetPlane pipe A, plane 5, disabling (kms_vblank:572) igt_kms-DEBUG: display: SetProp plane A.5 "rotation" to 0x1/1 (kms_vblank:572) igt_kms-DEBUG: display: SetProp plane A.5 "alpha" to 0xffff/65535 (kms_vblank:572) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:572) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 6 (kms_vblank:572) igt_kms-DEBUG: display: SetPlane pipe A, plane 6, disabling (kms_vblank:572) igt_kms-DEBUG: display: SetProp plane A.6 "rotation" to 0x1/1 (kms_vblank:572) igt_kms-DEBUG: display: SetProp plane A.6 "alpha" to 0xffff/65535 (kms_vblank:572) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:572) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 7 (kms_vblank:572) igt_kms-DEBUG: display: SetPlane pipe A, plane 7, disabling (kms_vblank:572) igt_kms-DEBUG: display: SetProp plane A.7 "rotation" to 0x1/1 (kms_vblank:572) igt_kms-DEBUG: display: SetProp plane A.7 "alpha" to 0xffff/65535 (kms_vblank:572) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:572) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 8 (kms_vblank:572) igt_kms-DEBUG: display: SetPlane pipe A, plane 8, disabling (kms_vblank:572) igt_kms-DEBUG: display: SetProp plane A.8 "rotation" to 0x1/1 (kms_vblank:572) igt_kms-DEBUG: display: SetProp plane A.8 "alpha" to 0xffff/65535 (kms_vblank:572) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:572) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 9 (kms_vblank:572) igt_kms-DEBUG: display: SetPlane pipe A, plane 9, disabling (kms_vblank:572) igt_kms-DEBUG: display: SetProp plane A.9 "rotation" to 0x1/1 (kms_vblank:572) igt_kms-DEBUG: display: SetProp plane A.9 "alpha" to 0xffff/65535 (kms_vblank:572) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:572) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 10 (kms_vblank:572) igt_kms-DEBUG: display: SetPlane pipe A, plane 10, disabling (kms_vblank:572) igt_kms-DEBUG: display: SetProp plane A.10 "rotation" to 0x1/1 (kms_vblank:572) igt_kms-DEBUG: display: SetProp plane A.10 "alpha" to 0xffff/65535 (kms_vblank:572) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:572) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 11 (kms_vblank:572) igt_kms-DEBUG: display: SetPlane pipe A, plane 11, disabling (kms_vblank:572) igt_kms-DEBUG: display: SetProp plane A.11 "rotation" to 0x1/1 (kms_vblank:572) igt_kms-DEBUG: display: SetProp plane A.11 "alpha" to 0xffff/65535 (kms_vblank:572) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:572) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 12 (kms_vblank:572) igt_kms-DEBUG: display: SetPlane pipe A, plane 12, disabling (kms_vblank:572) igt_kms-DEBUG: display: SetProp plane A.12 "rotation" to 0x1/1 (kms_vblank:572) igt_kms-DEBUG: display: SetProp plane A.12 "alpha" to 0xffff/65535 (kms_vblank:572) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:572) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 13 (kms_vblank:572) igt_kms-DEBUG: display: SetPlane pipe A, plane 13, disabling (kms_vblank:572) igt_kms-DEBUG: display: SetProp plane A.13 "rotation" to 0x1/1 (kms_vblank:572) igt_kms-DEBUG: display: SetProp plane A.13 "alpha" to 0xffff/65535 (kms_vblank:572) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:572) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 14 (kms_vblank:572) igt_kms-DEBUG: display: SetPlane pipe A, plane 14, disabling (kms_vblank:572) igt_kms-DEBUG: display: SetProp plane A.14 "rotation" to 0x1/1 (kms_vblank:572) igt_kms-DEBUG: display: SetProp plane A.14 "alpha" to 0xffff/65535 (kms_vblank:572) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:572) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 15 (kms_vblank:572) igt_kms-DEBUG: display: SetPlane pipe A, plane 15, disabling (kms_vblank:572) igt_kms-DEBUG: display: SetProp plane A.15 "rotation" to 0x1/1 (kms_vblank:572) igt_kms-DEBUG: display: SetProp plane A.15 "alpha" to 0xffff/65535 (kms_vblank:572) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:572) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 16 (kms_vblank:572) igt_kms-DEBUG: display: SetPlane pipe A, plane 16, disabling (kms_vblank:572) igt_kms-DEBUG: display: SetProp plane A.16 "rotation" to 0x1/1 (kms_vblank:572) igt_kms-DEBUG: display: SetProp plane A.16 "alpha" to 0xffff/65535 (kms_vblank:572) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:572) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 17 (kms_vblank:572) igt_kms-DEBUG: display: SetCursor pipe A, disabling (kms_vblank:572) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0) (kms_vblank:572) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:572) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 0 (kms_vblank:572) igt_kms-DEBUG: display: SetCrtc pipe B, disabling (kms_vblank:572) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:572) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 17 (kms_vblank:572) igt_kms-DEBUG: display: SetCursor pipe B, disabling (kms_vblank:572) igt_kms-DEBUG: display: MoveCursor pipe B, (0, 0) (kms_vblank:572) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:572) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 0 (kms_vblank:572) igt_kms-DEBUG: display: SetCrtc pipe C, disabling (kms_vblank:572) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:572) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 17 (kms_vblank:572) igt_kms-DEBUG: display: SetCursor pipe C, disabling (kms_vblank:572) igt_kms-DEBUG: display: MoveCursor pipe C, (0, 0) (kms_vblank:572) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && pla<14>[ 106.278078] [IGT] kms_vblank: finished subtest pipe-A-Writeback-1, FAIL ne_idx <<14>[ 106.278217] [IGT] kms_vblank: finished subtest wait-busy, FAIL pipe->n<14>[ 106.279605] [IGT] kms_vblank: exiting, ret=98 _planes (kms_vblank:572) igt_kms-DEBUG: display<8>[ 106.301249] : Fixing up initial rotation pipe D, plane 0 (kms_vblank:572) igt_kms-DEBUG: display: SetCrtc pipe D, disabling (kms_vblank:572) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && pla<14>[ 106.323527] [IGT] kms_vblank: executing ne_idx < pipe->n_planes (kms_vblank:572) igt_kms-DEBUG: display: Fixing up initial <14>[ 106.338685] [IGT] kms_vblank: starting subtest wait-busy-hang rotation<14>[ 106.338812] [IGT] kms_vblank: finished subtest wait-busy-hang, SKIP pipe D,<14>[ 106.338957] [IGT] kms_vblank: exiting, ret=77 plane 1<8>[ 106.344094] 7 (kms_<14>[ 106.367073] [IGT] kms_vblank: executing vblank:572) igt_kms-DEBUG: display: SetCursor pipe D, disabling (kms_vblank:572) igt_kms-DEBUG: display: MoveCursor pipe D, (0, 0) (kms_vblank:572) igt_kms-DEBUG: Tes<14>[ 106.386206] [IGT] kms_vblank: starting subtest wait-forked-busy t requir<14>[ 106.386608] [IGT] kms_vblank: starting dynamic subtest pipe-A-Writeback-1 ement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:572) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 0 (kms_vblank:572) igt_kms-DEBUG: display: SetCrtc pipe E, disabling (kms_vblank:572) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:572) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 17 (kms_vblank:572) igt_kms-DEBUG: display: SetCursor pipe E, disabling (kms_vblank:572) igt_kms-DEBUG: display: MoveCursor pipe E, (0, 0) (kms_vblank:572) igt_kms-DEBUG: display: } (kms_vblank:572) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:572) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:572) igt_kms-CRITICAL: Last errno: 16, Device or resource busy (kms_vblank:572) igt_core-INFO: Stack trace: (kms_vblank:572) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_vblank:572) igt_core-INFO: #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() (kms_vblank:572) igt_core-INFO: #2 [+0xbb8c1f94] (kms_vblank:572) igt_core-INFO: #3 [+0xbb8c2fa0] (kms_vblank:572) igt_core-INFO: #4 [+0xbb8c31bc] (kms_vblank:572) igt_core-INFO: #5 [+0xbb8c1c78] (kms_vblank:572) igt_core-INFO: #6 [__libc_init_first+0x80] (kms_vblank:572) igt_core-INFO: #7 [__libc_start_main+0x98] (kms_vblank:572) igt_core-INFO: #8 [+0xbb8c1cb0] **** END **** Dynamic subtest pipe-A-Writeback-1: FAIL (3.732s) Subtest wait-busy: FAIL (3.732s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305804 for randomisation Opened device: /dev/dri/card0 Starting subtest: wait-busy-hang Test requirement not met in function gem_context_require_bannable, file ../lib/i915/gem_context.c:324: Test requirement: has_ban_period || has_bannable Last errno: 22, Invalid argument Subtest wait-busy-hang: SKIP (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305804 for randomisation Opened device: /dev/dri/card0 Starting subtest: wait-forked-busy Starting dynamic subtest: pipe-A-Writeback-1 (kms_vblank:578) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:578) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:578) igt_kms-CRITICAL: Last errno: 16, Device or resource busy Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() #2 [+0xdc541f94] #3 [+0xdc542fa0] #4 [+0xdc5431bc] #5 [+0xdc541c78] #6 [__libc_init_first+0x80] #7 [__libc_start_main+0x98] #8 [+0xdc541cb0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** (kms_vblank:578) igt_kms-DEBUG: display: SetProp plane A.4 "rotation" to 0x1/1 (kms_vblank:578) igt_kms-DEBUG: display: SetProp plane A.4 "alpha" to 0xffff/65535 (kms_vblank:578) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:578) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 5 (kms_vblank:578) igt_kms-DEBUG: display: SetPlane pipe A, plane 5, disabling (kms_vblank:578) igt_kms-DEBUG: display: SetProp plane A.5 "rotation" to 0x1/1 (kms_vblank:578) igt_kms-DEBUG: display: SetProp plane A.5 "alpha" to 0xffff/65535 (kms_vblank:578) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:578) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 6 (kms_vblank:578) igt_kms-DEBUG: display: SetPlane pipe A, plane 6, disabling (kms_vblank:578) igt_kms-DEBUG: display: SetProp plane A.6 "rotation" to 0x1/1 (kms_vblank:578) igt_kms-DEBUG: display: SetProp plane A.6 "alpha" to 0xffff/65535 (kms_vblank:578) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:578) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 7 (kms_vblank:578) igt_kms-DEBUG: display: SetPlane pipe A, plane 7, disabling (kms_vblank:578) igt_kms-DEBUG: display: SetProp plane A.7 "rotation" to 0x1/1 (kms_vblank:578) igt_kms-DEBUG: display: SetProp plane A.7 "alpha" to 0xffff/65535 (kms_vblank:578) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:578) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 8 (kms_vblank:578) igt_kms-DEBUG: display: SetPlane pipe A, plane 8, disabling (kms_vblank:578) igt_kms-DEBUG: display: SetProp plane A.8 "rotation" to 0x1/1 (kms_vblank:578) igt_kms-DEBUG: display: SetProp plane A.8 "alpha" to 0xffff/65535 (kms_vblank:578) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:578) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 9 (kms_vblank:578) igt_kms-DEBUG: display: SetPlane pipe A, plane 9, disabling (kms_vblank:578) igt_kms-DEBUG: display: SetProp plane A.9 "rotation" to 0x1/1 (kms_vblank:578) igt_kms-DEBUG: display: SetProp plane A.9 "alpha" to 0xffff/65535 (kms_vblank:578) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:578) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 10 (kms_vblank:578) igt_kms-DEBUG: display: SetPlane pipe A, plane 10, disabling (kms_vblank:578) igt_kms-DEBUG: display: SetProp plane A.10 "rotation" to 0x1/1 (kms_vblank:578) igt_kms-DEBUG: display: SetProp plane A.10 "alpha" to 0xffff/65535 (kms_vblank:578) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:578) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 11 (kms_vblank:578) igt_kms-DEBUG: display: SetPlane pipe A, plane 11, disabling (kms_vblank:578) igt_kms-DEBUG: display: SetProp plane A.11 "rotation" to 0x1/1 (kms_vblank:578) igt_kms-DEBUG: display: SetProp plane A.11 "alpha" to 0xffff/65535 (kms_vblank:578) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:578) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 12 (kms_vblank:578) igt_kms-DEBUG: display: SetPlane pipe A, plane 12, disabling (kms_vblank:578) igt_kms-DEBUG: display: SetProp plane A.12 "rotation" to 0x1/1 (kms_vblank:578) igt_kms-DEBUG: display: SetProp plane A.12 "alpha" to 0xffff/65535 (kms_vblank:578) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:578) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 13 (kms_vblank:578) igt_kms-DEBUG: display: SetPlane pipe A, plane 13, disabling (kms_vblank:578) igt_kms-DEBUG: display: SetProp plane A.13 "rotation" to 0x1/1 (kms_vblank:578) igt_kms-DEBUG: display: SetProp plane A.13 "alpha" to 0xffff/65535 (kms_vblank:578) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:578) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 14 (kms_vblank:578) igt_kms-DEBUG: display: SetPlane pipe A, plane 14, disabling (kms_vblank:578) igt_kms-DEBUG: display: SetProp plane A.14 "rotation" to 0x1/1 (kms_vblank:578) igt_kms-DEBUG: display: SetProp plane A.14 "alpha" to 0xffff/65535 (kms_vblank:578) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:578) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 15 (kms_vblank:578) igt_kms-DEBUG: display: SetPlane pipe A, plane 15, disabling (kms_vblank:578) igt_kms-DEBUG: display: SetProp plane A.15 "rotation" to 0x1/1 (kms_vblank:578) igt_kms-DEBUG: display: SetProp plane A.15 "alpha" to 0xffff/65535 (kms_vblank:578) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:578) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 16 (kms_vblank:578) igt_kms-DEBUG: display: SetPlane pipe A, plane 16, disabling (kms_vblank:578) igt_kms-DEBUG: display: SetProp plane A.16 "rotation" to 0x1/1 (kms_vblank:578) igt_kms-DEBUG: display: SetProp plane A.16 "alpha" to 0xffff/65535 (kms_vblank:578) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:578) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 17 (kms_vblank:578) igt_kms-DEBUG: display: SetCursor pipe A, disabling (kms_vblank:578) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0) (kms_vblank:578) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:578) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 0 (kms_vblank:578) igt_kms-DEBUG: display: SetCrtc pipe B, disabling (kms_vblank:578) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:578) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 17 (kms_vblank:578) igt_kms-DEBUG: display: SetCursor pipe B, disabling (kms_vblank:578) igt_kms-DEBUG: display: MoveCursor pipe B, (0, 0) (kms_vblank:578) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:578) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 0 (kms_vblank:578) igt_kms-DEBUG: display: SetCrtc pipe C, disabling (kms_vblank:578) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:578) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 17 (kms_vblank:578) igt_kms-DEBUG: display: SetCursor pipe C, disabling (kms_vblank:578) igt_kms-DEBUG: display: MoveCursor pipe C, (0, 0) (kms_vblank:578) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:578) igt_km<14>[ 110.120161] [IGT] kms_vblank: finished subtest pipe-A-Writeback-1, FAIL s-DEBUG:<14>[ 110.120300] [IGT] kms_vblank: finished subtest wait-forked-busy, FAIL display<14>[ 110.121658] [IGT] kms_vblank: exiting, ret=98 : Fi<8>[ 110.128692] xing up initial rotation pipe D, plane 0<14>[ 110.152342] [IGT] kms_vblank: executing (kms_vblank:578) igt_kms-DEBUG: display: SetCrtc pipe D, disabling (kms_vblank:57<14>[ 110.166944] [IGT] kms_vblank: starting subtest wait-forked-busy-hang 8) igt_k<14>[ 110.167079] [IGT] kms_vblank: finished subtest wait-forked-busy-hang, SKIP ms-DEBUG<14>[ 110.167232] [IGT] kms_vblank: exiting, ret=77 : Test requirement passed: plane_idx >= <8>[ 110.188680] 0 && plane_idx < pipe->n_planes (kms_vblank:578) igt_kms-DEBUG: display: Fixing up initial rotation pipe D, plane 17 (kms_vblank:578) igt_<14>[ 110.208835] [IGT] kms_vblank: executing kms-DEBUG: display: SetCursor pipe D, disabling (kms_vblank:578) igt_kms-DEBUG: display: MoveCursor pipe D, (0, 0) (km<14>[ 110.223386] [IGT] kms_vblank: starting subtest ts-continuation-idle s_vblank<14>[ 110.223765] [IGT] kms_vblank: starting dynamic subtest pipe-A-Writeback-1 :578) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:578) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 0 (kms_vblank:578) igt_kms-DEBUG: display: SetCrtc pipe E, disabling (kms_vblank:578) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:578) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 17 (kms_vblank:578) igt_kms-DEBUG: display: SetCursor pipe E, disabling (kms_vblank:578) igt_kms-DEBUG: display: MoveCursor pipe E, (0, 0) (kms_vblank:578) igt_kms-DEBUG: display: } (kms_vblank:578) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:578) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:578) igt_kms-CRITICAL: Last errno: 16, Device or resource busy (kms_vblank:578) igt_core-INFO: Stack trace: (kms_vblank:578) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_vblank:578) igt_core-INFO: #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() (kms_vblank:578) igt_core-INFO: #2 [+0xdc541f94] (kms_vblank:578) igt_core-INFO: #3 [+0xdc542fa0] (kms_vblank:578) igt_core-INFO: #4 [+0xdc5431bc] (kms_vblank:578) igt_core-INFO: #5 [+0xdc541c78] (kms_vblank:578) igt_core-INFO: #6 [__libc_init_first+0x80] (kms_vblank:578) igt_core-INFO: #7 [__libc_start_main+0x98] (kms_vblank:578) igt_core-INFO: #8 [+0xdc541cb0] **** END **** Dynamic subtest pipe-A-Writeback-1: FAIL (3.733s) Subtest wait-forked-busy: FAIL (3.734s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305808 for randomisation Opened device: /dev/dri/card0 Starting subtest: wait-forked-busy-hang Test requirement not met in function gem_context_require_bannable, file ../lib/i915/gem_context.c:324: Test requirement: has_ban_period || has_bannable Last errno: 22, Invalid argument Subtest wait-forked-busy-hang: SKIP (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305808 for randomisation Opened device: /dev/dri/card0 Starting subtest: ts-continuation-idle Starting dynamic subtest: pipe-A-Writeback-1 (kms_vblank:584) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:584) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:584) igt_kms-CRITICAL: Last errno: 16, Device or resource busy Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() #2 [+0xb3821f94] #3 [+0xb3822fa0] #4 [+0xb38231bc] #5 [+0xb3821c78] #6 [__libc_init_first+0x80] #7 [__libc_start_main+0x98] #8 [+0xb3821cb0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** (kms_vblank:584) igt_kms-DEBUG: display: SetProp plane A.4 "rotation" to 0x1/1 (kms_vblank:584) igt_kms-DEBUG: display: SetProp plane A.4 "alpha" to 0xffff/65535 (kms_vblank:584) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:584) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 5 (kms_vblank:584) igt_kms-DEBUG: display: SetPlane pipe A, plane 5, disabling (kms_vblank:584) igt_kms-DEBUG: display: SetProp plane A.5 "rotation" to 0x1/1 (kms_vblank:584) igt_kms-DEBUG: display: SetProp plane A.5 "alpha" to 0xffff/65535 (kms_vblank:584) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:584) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 6 (kms_vblank:584) igt_kms-DEBUG: display: SetPlane pipe A, plane 6, disabling (kms_vblank:584) igt_kms-DEBUG: display: SetProp plane A.6 "rotation" to 0x1/1 (kms_vblank:584) igt_kms-DEBUG: display: SetProp plane A.6 "alpha" to 0xffff/65535 (kms_vblank:584) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:584) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 7 (kms_vblank:584) igt_kms-DEBUG: display: SetPlane pipe A, plane 7, disabling (kms_vblank:584) igt_kms-DEBUG: display: SetProp plane A.7 "rotation" to 0x1/1 (kms_vblank:584) igt_kms-DEBUG: display: SetProp plane A.7 "alpha" to 0xffff/65535 (kms_vblank:584) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:584) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 8 (kms_vblank:584) igt_kms-DEBUG: display: SetPlane pipe A, plane 8, disabling (kms_vblank:584) igt_kms-DEBUG: display: SetProp plane A.8 "rotation" to 0x1/1 (kms_vblank:584) igt_kms-DEBUG: display: SetProp plane A.8 "alpha" to 0xffff/65535 (kms_vblank:584) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:584) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 9 (kms_vblank:584) igt_kms-DEBUG: display: SetPlane pipe A, plane 9, disabling (kms_vblank:584) igt_kms-DEBUG: display: SetProp plane A.9 "rotation" to 0x1/1 (kms_vblank:584) igt_kms-DEBUG: display: SetProp plane A.9 "alpha" to 0xffff/65535 (kms_vblank:584) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:584) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 10 (kms_vblank:584) igt_kms-DEBUG: display: SetPlane pipe A, plane 10, disabling (kms_vblank:584) igt_kms-DEBUG: display: SetProp plane A.10 "rotation" to 0x1/1 (kms_vblank:584) igt_kms-DEBUG: display: SetProp plane A.10 "alpha" to 0xffff/65535 (kms_vblank:584) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:584) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 11 (kms_vblank:584) igt_kms-DEBUG: display: SetPlane pipe A, plane 11, disabling (kms_vblank:584) igt_kms-DEBUG: display: SetProp plane A.11 "rotation" to 0x1/1 (kms_vblank:584) igt_kms-DEBUG: display: SetProp plane A.11 "alpha" to 0xffff/65535 (kms_vblank:584) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:584) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 12 (kms_vblank:584) igt_kms-DEBUG: display: SetPlane pipe A, plane 12, disabling (kms_vblank:584) igt_kms-DEBUG: display: SetProp plane A.12 "rotation" to 0x1/1 (kms_vblank:584) igt_kms-DEBUG: display: SetProp plane A.12 "alpha" to 0xffff/65535 (kms_vblank:584) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:584) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 13 (kms_vblank:584) igt_kms-DEBUG: display: SetPlane pipe A, plane 13, disabling (kms_vblank:584) igt_kms-DEBUG: display: SetProp plane A.13 "rotation" to 0x1/1 (kms_vblank:584) igt_kms-DEBUG: display: SetProp plane A.13 "alpha" to 0xffff/65535 (kms_vblank:584) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:584) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 14 (kms_vblank:584) igt_kms-DEBUG: display: SetPlane pipe A, plane 14, disabling (kms_vblank:584) igt_kms-DEBUG: display: SetProp plane A.14 "rotation" to 0x1/1 (kms_vblank:584) igt_kms-DEBUG: display: SetProp plane A.14 "alpha" to 0xffff/65535 (kms_vblank:584) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:584) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 15 (kms_vblank:584) igt_kms-DEBUG: display: SetPlane pipe A, plane 15, disabling (kms_vblank:584) igt_kms-DEBUG: display: SetProp plane A.15 "rotation" to 0x1/1 (kms_vblank:584) igt_kms-DEBUG: display: SetProp plane A.15 "alpha" to 0xffff/65535 (kms_vblank:584) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:584) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 16 (kms_vblank:584) igt_kms-DEBUG: display: SetPlane pipe A, plane 16, disabling (kms_vblank:584) igt_kms-DEBUG: display: SetProp plane A.16 "rotation" to 0x1/1 (kms_vblank:584) igt_kms-DEBUG: display: SetProp plane A.16 "alpha" to 0xffff/65535 (kms_vblank:584) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:584) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 17 (kms_vblank:584) igt_kms-DEBUG: display: SetCursor pipe A, disabling (kms_vblank:584) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0) (kms_vblank:584) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:584) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 0 (kms_vblank:584) igt_kms-DEBUG: display: SetCrtc pipe B, disabling (kms_vblank:584) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:584) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 17 (kms_vblank:584) igt_kms-DEBUG: display: SetCursor pipe B, disabling (kms_vblank:584) igt_kms-DEBUG: display: MoveCursor pipe B, (0, 0) (kms_vblank:584) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:584) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 0 (kms_vblank:584) igt_kms-DEBUG: display: SetCrtc pipe C, disabling (kms_vblank:584) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:584) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 17 (kms_vblank:584) igt_kms-DEBUG: display: SetCursor pipe C, disabling (kms_vblank:584) igt_kms-DEBUG: display: MoveCursor pipe C, (0, 0) (kms_vblank:584) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && pla<14>[ 113.958110] [IGT] kms_vblank: finished subtest pipe-A-Writeback-1, FAIL ne_idx <<14>[ 113.958250] [IGT] kms_vblank: finished subtest ts-continuation-idle, FAIL pipe->n_planes (kms_vblank:584) igt_kms-DEBUG: display<14>[ 113.976483] [IGT] kms_vblank: exiting, ret=98 : Fi<8>[ 113.982950] xing up initial rotation pipe D, plane 0 (kms_vblank:584) igt_kms-DEBUG: display: SetCrtc pipe D, disabling (kms_v<14>[ 114.003278] [IGT] kms_vblank: executing blank:584) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:584) igt_kms-DEBUG: display: Fixing up initial rotation pipe D, plane 1<14>[ 114.022374] [IGT] kms_vblank: starting subtest ts-continuation-idle-hang 7 (kms_<14>[ 114.022500] [IGT] kms_vblank: finished subtest ts-continuation-idle-hang, SKIP vblank:5<14>[ 114.022650] [IGT] kms_vblank: exiting, ret=77 84) igt_<8>[ 114.027819] kms-DEBU<14>[ 114.045167] [IGT] kms_vblank: executing G: display: SetCursor pipe D, disabling (kms_vblank:584) igt_kms-DEBUG: display: MoveCursor pipe D, (0, 0) (kms_vblank:584) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && <14>[ 114.073412] [IGT] kms_vblank: starting subtest ts-continuation-dpms-rpm plane_id<14>[ 114.073770] [IGT] kms_vblank: starting dynamic subtest pipe-A-Writeback-1 x < pipe->n_planes (kms_vblank:584) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 0 (kms_vblank:584) igt_kms-DEBUG: display: SetCrtc pipe E, disabling (kms_vblank:584) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:584) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 17 (kms_vblank:584) igt_kms-DEBUG: display: SetCursor pipe E, disabling (kms_vblank:584) igt_kms-DEBUG: display: MoveCursor pipe E, (0, 0) (kms_vblank:584) igt_kms-DEBUG: display: } (kms_vblank:584) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:584) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:584) igt_kms-CRITICAL: Last errno: 16, Device or resource busy (kms_vblank:584) igt_core-INFO: Stack trace: (kms_vblank:584) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_vblank:584) igt_core-INFO: #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() (kms_vblank:584) igt_core-INFO: #2 [+0xb3821f94] (kms_vblank:584) igt_core-INFO: #3 [+0xb3822fa0] (kms_vblank:584) igt_core-INFO: #4 [+0xb38231bc] (kms_vblank:584) igt_core-INFO: #5 [+0xb3821c78] (kms_vblank:584) igt_core-INFO: #6 [__libc_init_first+0x80] (kms_vblank:584) igt_core-INFO: #7 [__libc_start_main+0x98] (kms_vblank:584) igt_core-INFO: #8 [+0xb3821cb0] **** END **** Dynamic subtest pipe-A-Writeback-1: FAIL (3.734s) Subtest ts-continuation-idle: FAIL (3.735s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305812 for randomisation Opened device: /dev/dri/card0 Starting subtest: ts-continuation-idle-hang Test requirement not met in function gem_context_require_bannable, file ../lib/i915/gem_context.c:324: Test requirement: has_ban_period || has_bannable Last errno: 22, Invalid argument Subtest ts-continuation-idle-hang: SKIP (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305812 for randomisation Opened device: /dev/dri/card0 Starting subtest: ts-continuation-dpms-rpm Starting dynamic subtest: pipe-A-Writeback-1 (kms_vblank:590) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:590) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:590) igt_kms-CRITICAL: Last errno: 16, Device or resource busy Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() #2 [+0xcc9b1f94] #3 [+0xcc9b2fa0] #4 [+0xcc9b31bc] #5 [+0xcc9b1c78] #6 [__libc_init_first+0x80] #7 [__libc_start_main+0x98] #8 [+0xcc9b1cb0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** (kms_vblank:590) igt_kms-DEBUG: display: SetProp plane A.4 "rotation" to 0x1/1 (kms_vblank:590) igt_kms-DEBUG: display: SetProp plane A.4 "alpha" to 0xffff/65535 (kms_vblank:590) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:590) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 5 (kms_vblank:590) igt_kms-DEBUG: display: SetPlane pipe A, plane 5, disabling (kms_vblank:590) igt_kms-DEBUG: display: SetProp plane A.5 "rotation" to 0x1/1 (kms_vblank:590) igt_kms-DEBUG: display: SetProp plane A.5 "alpha" to 0xffff/65535 (kms_vblank:590) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:590) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 6 (kms_vblank:590) igt_kms-DEBUG: display: SetPlane pipe A, plane 6, disabling (kms_vblank:590) igt_kms-DEBUG: display: SetProp plane A.6 "rotation" to 0x1/1 (kms_vblank:590) igt_kms-DEBUG: display: SetProp plane A.6 "alpha" to 0xffff/65535 (kms_vblank:590) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:590) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 7 (kms_vblank:590) igt_kms-DEBUG: display: SetPlane pipe A, plane 7, disabling (kms_vblank:590) igt_kms-DEBUG: display: SetProp plane A.7 "rotation" to 0x1/1 (kms_vblank:590) igt_kms-DEBUG: display: SetProp plane A.7 "alpha" to 0xffff/65535 (kms_vblank:590) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:590) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 8 (kms_vblank:590) igt_kms-DEBUG: display: SetPlane pipe A, plane 8, disabling (kms_vblank:590) igt_kms-DEBUG: display: SetProp plane A.8 "rotation" to 0x1/1 (kms_vblank:590) igt_kms-DEBUG: display: SetProp plane A.8 "alpha" to 0xffff/65535 (kms_vblank:590) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:590) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 9 (kms_vblank:590) igt_kms-DEBUG: display: SetPlane pipe A, plane 9, disabling (kms_vblank:590) igt_kms-DEBUG: display: SetProp plane A.9 "rotation" to 0x1/1 (kms_vblank:590) igt_kms-DEBUG: display: SetProp plane A.9 "alpha" to 0xffff/65535 (kms_vblank:590) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:590) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 10 (kms_vblank:590) igt_kms-DEBUG: display: SetPlane pipe A, plane 10, disabling (kms_vblank:590) igt_kms-DEBUG: display: SetProp plane A.10 "rotation" to 0x1/1 (kms_vblank:590) igt_kms-DEBUG: display: SetProp plane A.10 "alpha" to 0xffff/65535 (kms_vblank:590) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:590) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 11 (kms_vblank:590) igt_kms-DEBUG: display: SetPlane pipe A, plane 11, disabling (kms_vblank:590) igt_kms-DEBUG: display: SetProp plane A.11 "rotation" to 0x1/1 (kms_vblank:590) igt_kms-DEBUG: display: SetProp plane A.11 "alpha" to 0xffff/65535 (kms_vblank:590) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:590) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 12 (kms_vblank:590) igt_kms-DEBUG: display: SetPlane pipe A, plane 12, disabling (kms_vblank:590) igt_kms-DEBUG: display: SetProp plane A.12 "rotation" to 0x1/1 (kms_vblank:590) igt_kms-DEBUG: display: SetProp plane A.12 "alpha" to 0xffff/65535 (kms_vblank:590) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:590) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 13 (kms_vblank:590) igt_kms-DEBUG: display: SetPlane pipe A, plane 13, disabling (kms_vblank:590) igt_kms-DEBUG: display: SetProp plane A.13 "rotation" to 0x1/1 (kms_vblank:590) igt_kms-DEBUG: display: SetProp plane A.13 "alpha" to 0xffff/65535 (kms_vblank:590) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:590) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 14 (kms_vblank:590) igt_kms-DEBUG: display: SetPlane pipe A, plane 14, disabling (kms_vblank:590) igt_kms-DEBUG: display: SetProp plane A.14 "rotation" to 0x1/1 (kms_vblank:590) igt_kms-DEBUG: display: SetProp plane A.14 "alpha" to 0xffff/65535 (kms_vblank:590) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:590) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 15 (kms_vblank:590) igt_kms-DEBUG: display: SetPlane pipe A, plane 15, disabling (kms_vblank:590) igt_kms-DEBUG: display: SetProp plane A.15 "rotation" to 0x1/1 (kms_vblank:590) igt_kms-DEBUG: display: SetProp plane A.15 "alpha" to 0xffff/65535 (kms_vblank:590) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:590) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 16 (kms_vblank:590) igt_kms-DEBUG: display: SetPlane pipe A, plane 16, disabling (kms_vblank:590) igt_kms-DEBUG: display: SetProp plane A.16 "rotation" to 0x1/1 (kms_vblank:590) igt_kms-DEBUG: display: SetProp plane A.16 "alpha" to 0xffff/65535 (kms_vblank:590) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:590) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 17 (kms_vblank:590) igt_kms-DEBUG: display: SetCursor pipe A, disabling (kms_vblank:590) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0) (kms_vblank:590) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:590) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 0 (kms_vblank:590) igt_kms-DEBUG: display: SetCrtc pipe B, disabling (kms_vblank:590) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:590) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 17 (kms_vblank:590) igt_kms-DEBUG: display: SetCursor pipe B, disabling (kms_vblank:590) igt_kms-DEBUG: display: MoveCursor pipe B, (0, 0) (kms_vblank:590) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:590) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 0 (kms_vblank:590) igt_kms-DEBUG: display: SetCrtc pipe C, disabling (kms_vblank:590) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:590) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 17 (kms_vblank:590) igt_kms-DEBUG: display: SetCursor pipe C, disabling (kms_vblank:590) igt_kms-DEBUG: display: MoveCursor pipe C, (0, 0) (kms_vblank:590) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && pla<14>[ 117.798755] [IGT] kms_vblank: finished subtest pipe-A-Writeback-1, FAIL ne_idx <<14>[ 117.798896] [IGT] kms_vblank: finished subtest ts-continuation-dpms-rpm, FAIL pipe->n<14>[ 117.800278] [IGT] kms_vblank: exiting, ret=98 _planes (kms_vblank:590) igt_kms-DEBUG:<8>[ 117.822414] display: Fixing up initial rotation pipe D, plane 0 (kms_vblank:590) igt_kms-DEBUG: display: SetCrtc pipe D, disabling (kms_vblank:590) igt_kms-DEBUG: Test requireme<14>[ 117.845131] [IGT] kms_vblank: executing nt passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:590) igt_kms-DEBUG: display: Fixing up initial rotation pipe D,<14>[ 117.859972] [IGT] kms_vblank: starting subtest ts-continuation-dpms-suspend plane 1<14>[ 117.860349] [IGT] kms_vblank: starting dynamic subtest pipe-A-Writeback-1 7 (kms_vblank:590) igt_kms-DEBUG: display: SetCursor pipe D, disabling (kms_vblank:590) igt_kms-DEBUG: display: MoveCursor pipe D, (0, 0) (kms_vblank:590) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:590) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 0 (kms_vblank:590) igt_kms-DEBUG: display: SetCrtc pipe E, disabling (kms_vblank:590) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:590) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 17 (kms_vblank:590) igt_kms-DEBUG: display: SetCursor pipe E, disabling (kms_vblank:590) igt_kms-DEBUG: display: MoveCursor pipe E, (0, 0) (kms_vblank:590) igt_kms-DEBUG: display: } (kms_vblank:590) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:590) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:590) igt_kms-CRITICAL: Last errno: 16, Device or resource busy (kms_vblank:590) igt_core-INFO: Stack trace: (kms_vblank:590) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_vblank:590) igt_core-INFO: #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() (kms_vblank:590) igt_core-INFO: #2 [+0xcc9b1f94] (kms_vblank:590) igt_core-INFO: #3 [+0xcc9b2fa0] (kms_vblank:590) igt_core-INFO: #4 [+0xcc9b31bc] (kms_vblank:590) igt_core-INFO: #5 [+0xcc9b1c78] (kms_vblank:590) igt_core-INFO: #6 [__libc_init_first+0x80] (kms_vblank:590) igt_core-INFO: #7 [__libc_start_main+0x98] (kms_vblank:590) igt_core-INFO: #8 [+0xcc9b1cb0] **** END **** Dynamic subtest pipe-A-Writeback-1: FAIL (3.725s) Subtest ts-continuation-dpms-rpm: FAIL (3.725s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305815 for randomisation Opened device: /dev/dri/card0 Starting subtest: ts-continuation-dpms-suspend Starting dynamic subtest: pipe-A-Writeback-1 (kms_vblank:593) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:593) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:593) igt_kms-CRITICAL: Last errno: 16, Device or resource busy Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() #2 [+0xdecd1f94] #3 [+0xdecd2fa0] #4 [+0xdecd31bc] #5 [+0xdecd1c78] #6 [__libc_init_first+0x80] #7 [__libc_start_main+0x98] #8 [+0xdecd1cb0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** (kms_vblank:593) igt_kms-DEBUG: display: SetProp plane A.4 "rotation" to 0x1/1 (kms_vblank:593) igt_kms-DEBUG: display: SetProp plane A.4 "alpha" to 0xffff/65535 (kms_vblank:593) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:593) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 5 (kms_vblank:593) igt_kms-DEBUG: display: SetPlane pipe A, plane 5, disabling (kms_vblank:593) igt_kms-DEBUG: display: SetProp plane A.5 "rotation" to 0x1/1 (kms_vblank:593) igt_kms-DEBUG: display: SetProp plane A.5 "alpha" to 0xffff/65535 (kms_vblank:593) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:593) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 6 (kms_vblank:593) igt_kms-DEBUG: display: SetPlane pipe A, plane 6, disabling (kms_vblank:593) igt_kms-DEBUG: display: SetProp plane A.6 "rotation" to 0x1/1 (kms_vblank:593) igt_kms-DEBUG: display: SetProp plane A.6 "alpha" to 0xffff/65535 (kms_vblank:593) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:593) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 7 (kms_vblank:593) igt_kms-DEBUG: display: SetPlane pipe A, plane 7, disabling (kms_vblank:593) igt_kms-DEBUG: display: SetProp plane A.7 "rotation" to 0x1/1 (kms_vblank:593) igt_kms-DEBUG: display: SetProp plane A.7 "alpha" to 0xffff/65535 (kms_vblank:593) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:593) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 8 (kms_vblank:593) igt_kms-DEBUG: display: SetPlane pipe A, plane 8, disabling (kms_vblank:593) igt_kms-DEBUG: display: SetProp plane A.8 "rotation" to 0x1/1 (kms_vblank:593) igt_kms-DEBUG: display: SetProp plane A.8 "alpha" to 0xffff/65535 (kms_vblank:593) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:593) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 9 (kms_vblank:593) igt_kms-DEBUG: display: SetPlane pipe A, plane 9, disabling (kms_vblank:593) igt_kms-DEBUG: display: SetProp plane A.9 "rotation" to 0x1/1 (kms_vblank:593) igt_kms-DEBUG: display: SetProp plane A.9 "alpha" to 0xffff/65535 (kms_vblank:593) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:593) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 10 (kms_vblank:593) igt_kms-DEBUG: display: SetPlane pipe A, plane 10, disabling (kms_vblank:593) igt_kms-DEBUG: display: SetProp plane A.10 "rotation" to 0x1/1 (kms_vblank:593) igt_kms-DEBUG: display: SetProp plane A.10 "alpha" to 0xffff/65535 (kms_vblank:593) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:593) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 11 (kms_vblank:593) igt_kms-DEBUG: display: SetPlane pipe A, plane 11, disabling (kms_vblank:593) igt_kms-DEBUG: display: SetProp plane A.11 "rotation" to 0x1/1 (kms_vblank:593) igt_kms-DEBUG: display: SetProp plane A.11 "alpha" to 0xffff/65535 (kms_vblank:593) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:593) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 12 (kms_vblank:593) igt_kms-DEBUG: display: SetPlane pipe A, plane 12, disabling (kms_vblank:593) igt_kms-DEBUG: display: SetProp plane A.12 "rotation" to 0x1/1 (kms_vblank:593) igt_kms-DEBUG: display: SetProp plane A.12 "alpha" to 0xffff/65535 (kms_vblank:593) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:593) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 13 (kms_vblank:593) igt_kms-DEBUG: display: SetPlane pipe A, plane 13, disabling (kms_vblank:593) igt_kms-DEBUG: display: SetProp plane A.13 "rotation" to 0x1/1 (kms_vblank:593) igt_kms-DEBUG: display: SetProp plane A.13 "alpha" to 0xffff/65535 (kms_vblank:593) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:593) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 14 (kms_vblank:593) igt_kms-DEBUG: display: SetPlane pipe A, plane 14, disabling (kms_vblank:593) igt_kms-DEBUG: display: SetProp plane A.14 "rotation" to 0x1/1 (kms_vblank:593) igt_kms-DEBUG: display: SetProp plane A.14 "alpha" to 0xffff/65535 (kms_vblank:593) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:593) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 15 (kms_vblank:593) igt_kms-DEBUG: display: SetPlane pipe A, plane 15, disabling (kms_vblank:593) igt_kms-DEBUG: display: SetProp plane A.15 "rotation" to 0x1/1 (kms_vblank:593) igt_kms-DEBUG: display: SetProp plane A.15 "alpha" to 0xffff/65535 (kms_vblank:593) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:593) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 16 (kms_vblank:593) igt_kms-DEBUG: display: SetPlane pipe A, plane 16, disabling (kms_vblank:593) igt_kms-DEBUG: display: SetProp plane A.16 "rotation" to 0x1/1 (kms_vblank:593) igt_kms-DEBUG: display: SetProp plane A.16 "alpha" to 0xffff/65535 (kms_vblank:593) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:593) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 17 (kms_vblank:593) igt_kms-DEBUG: display: SetCursor pipe A, disabling (kms_vblank:593) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0) (kms_vblank:593) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:593) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 0 (kms_vblank:593) igt_kms-DEBUG: display: SetCrtc pipe B, disabling (kms_vblank:593) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:593) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 17 (kms_vblank:593) igt_kms-DEBUG: display: SetCursor pipe B, disabling (kms_vblank:593) igt_kms-DEBUG: display: MoveCursor pipe B, (0, 0) (kms_vblank:593) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:593) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 0 (kms_vblank:593) igt_kms-DEBUG: display: SetCrtc pipe C, disabling (kms_vblank:593) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:593) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 17 (kms_vblank:593) igt_kms-DEBUG: display: SetCursor pipe C, disabling (kms_vblank:593) igt_kms-DEBUG: display: MoveCursor pipe C, (0, 0) (kms_vblank:593) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:593) igt_km<14>[ 121.639468] [IGT] kms_vblank: finished subtest pipe-A-Writeback-1, FAIL s-DEBUG:<14>[ 121.639607] [IGT] kms_vblank: finished subtest ts-continuation-dpms-suspend, FAIL display<14>[ 121.640973] [IGT] kms_vblank: exiting, ret=98 : Fi<8>[ 121.648622] xing up initial <14>[ 121.674498] [IGT] kms_vblank: executing rotation pipe D, plane 0 (kms_vblank:593) igt_kms-DEBUG: display: SetCrtc pipe D, disabling (kms_vblank:593) igt_kms-DEBUG: Test r<14>[ 121.690587] [IGT] kms_vblank: starting subtest ts-continuation-suspend equireme<14>[ 121.690989] [IGT] kms_vblank: starting dynamic subtest pipe-A-Writeback-1 nt passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:593) igt_kms-DEBUG: display: Fixing up initial rotation pipe D, plane 17 (kms_vblank:593) igt_kms-DEBUG: display: SetCursor pipe D, disabling (kms_vblank:593) igt_kms-DEBUG: display: MoveCursor pipe D, (0, 0) (kms_vblank:593) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:593) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 0 (kms_vblank:593) igt_kms-DEBUG: display: SetCrtc pipe E, disabling (kms_vblank:593) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:593) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 17 (kms_vblank:593) igt_kms-DEBUG: display: SetCursor pipe E, disabling (kms_vblank:593) igt_kms-DEBUG: display: MoveCursor pipe E, (0, 0) (kms_vblank:593) igt_kms-DEBUG: display: } (kms_vblank:593) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:593) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:593) igt_kms-CRITICAL: Last errno: 16, Device or resource busy (kms_vblank:593) igt_core-INFO: Stack trace: (kms_vblank:593) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_vblank:593) igt_core-INFO: #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() (kms_vblank:593) igt_core-INFO: #2 [+0xdecd1f94] (kms_vblank:593) igt_core-INFO: #3 [+0xdecd2fa0] (kms_vblank:593) igt_core-INFO: #4 [+0xdecd31bc] (kms_vblank:593) igt_core-INFO: #5 [+0xdecd1c78] (kms_vblank:593) igt_core-INFO: #6 [__libc_init_first+0x80] (kms_vblank:593) igt_core-INFO: #7 [__libc_start_main+0x98] (kms_vblank:593) igt_core-INFO: #8 [+0xdecd1cb0] **** END **** Dynamic subtest pipe-A-Writeback-1: FAIL (3.779s) Subtest ts-continuation-dpms-suspend: FAIL (3.780s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305819 for randomisation Opened device: /dev/dri/card0 Starting subtest: ts-continuation-suspend Starting dynamic subtest: pipe-A-Writeback-1 (kms_vblank:596) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:596) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:596) igt_kms-CRITICAL: Last errno: 16, Device or resource busy Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() #2 [+0xe3841f94] #3 [+0xe3842fa0] #4 [+0xe38431bc] #5 [+0xe3841c78] #6 [__libc_init_first+0x80] #7 [__libc_start_main+0x98] #8 [+0xe3841cb0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** (kms_vblank:596) igt_kms-DEBUG: display: SetProp plane A.4 "rotation" to 0x1/1 (kms_vblank:596) igt_kms-DEBUG: display: SetProp plane A.4 "alpha" to 0xffff/65535 (kms_vblank:596) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:596) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 5 (kms_vblank:596) igt_kms-DEBUG: display: SetPlane pipe A, plane 5, disabling (kms_vblank:596) igt_kms-DEBUG: display: SetProp plane A.5 "rotation" to 0x1/1 (kms_vblank:596) igt_kms-DEBUG: display: SetProp plane A.5 "alpha" to 0xffff/65535 (kms_vblank:596) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:596) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 6 (kms_vblank:596) igt_kms-DEBUG: display: SetPlane pipe A, plane 6, disabling (kms_vblank:596) igt_kms-DEBUG: display: SetProp plane A.6 "rotation" to 0x1/1 (kms_vblank:596) igt_kms-DEBUG: display: SetProp plane A.6 "alpha" to 0xffff/65535 (kms_vblank:596) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:596) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 7 (kms_vblank:596) igt_kms-DEBUG: display: SetPlane pipe A, plane 7, disabling (kms_vblank:596) igt_kms-DEBUG: display: SetProp plane A.7 "rotation" to 0x1/1 (kms_vblank:596) igt_kms-DEBUG: display: SetProp plane A.7 "alpha" to 0xffff/65535 (kms_vblank:596) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:596) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 8 (kms_vblank:596) igt_kms-DEBUG: display: SetPlane pipe A, plane 8, disabling (kms_vblank:596) igt_kms-DEBUG: display: SetProp plane A.8 "rotation" to 0x1/1 (kms_vblank:596) igt_kms-DEBUG: display: SetProp plane A.8 "alpha" to 0xffff/65535 (kms_vblank:596) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:596) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 9 (kms_vblank:596) igt_kms-DEBUG: display: SetPlane pipe A, plane 9, disabling (kms_vblank:596) igt_kms-DEBUG: display: SetProp plane A.9 "rotation" to 0x1/1 (kms_vblank:596) igt_kms-DEBUG: display: SetProp plane A.9 "alpha" to 0xffff/65535 (kms_vblank:596) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:596) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 10 (kms_vblank:596) igt_kms-DEBUG: display: SetPlane pipe A, plane 10, disabling (kms_vblank:596) igt_kms-DEBUG: display: SetProp plane A.10 "rotation" to 0x1/1 (kms_vblank:596) igt_kms-DEBUG: display: SetProp plane A.10 "alpha" to 0xffff/65535 (kms_vblank:596) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:596) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 11 (kms_vblank:596) igt_kms-DEBUG: display: SetPlane pipe A, plane 11, disabling (kms_vblank:596) igt_kms-DEBUG: display: SetProp plane A.11 "rotation" to 0x1/1 (kms_vblank:596) igt_kms-DEBUG: display: SetProp plane A.11 "alpha" to 0xffff/65535 (kms_vblank:596) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:596) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 12 (kms_vblank:596) igt_kms-DEBUG: display: SetPlane pipe A, plane 12, disabling (kms_vblank:596) igt_kms-DEBUG: display: SetProp plane A.12 "rotation" to 0x1/1 (kms_vblank:596) igt_kms-DEBUG: display: SetProp plane A.12 "alpha" to 0xffff/65535 (kms_vblank:596) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:596) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 13 (kms_vblank:596) igt_kms-DEBUG: display: SetPlane pipe A, plane 13, disabling (kms_vblank:596) igt_kms-DEBUG: display: SetProp plane A.13 "rotation" to 0x1/1 (kms_vblank:596) igt_kms-DEBUG: display: SetProp plane A.13 "alpha" to 0xffff/65535 (kms_vblank:596) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:596) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 14 (kms_vblank:596) igt_kms-DEBUG: display: SetPlane pipe A, plane 14, disabling (kms_vblank:596) igt_kms-DEBUG: display: SetProp plane A.14 "rotation" to 0x1/1 (kms_vblank:596) igt_kms-DEBUG: display: SetProp plane A.14 "alpha" to 0xffff/65535 (kms_vblank:596) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:596) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 15 (kms_vblank:596) igt_kms-DEBUG: display: SetPlane pipe A, plane 15, disabling (kms_vblank:596) igt_kms-DEBUG: display: SetProp plane A.15 "rotation" to 0x1/1 (kms_vblank:596) igt_kms-DEBUG: display: SetProp plane A.15 "alpha" to 0xffff/65535 (kms_vblank:596) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:596) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 16 (kms_vblank:596) igt_kms-DEBUG: display: SetPlane pipe A, plane 16, disabling (kms_vblank:596) igt_kms-DEBUG: display: SetProp plane A.16 "rotation" to 0x1/1 (kms_vblank:596) igt_kms-DEBUG: display: SetProp plane A.16 "alpha" to 0xffff/65535 (kms_vblank:596) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:596) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 17 (kms_vblank:596) igt_kms-DEBUG: display: SetCursor pipe A, disabling (kms_vblank:596) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0) (kms_vblank:596) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:596) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 0 (kms_vblank:596) igt_kms-DEBUG: display: SetCrtc pipe B, disabling (kms_vblank:596) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:596) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 17 (kms_vblank:596) igt_kms-DEBUG: display: SetCursor pipe B, disabling (kms_vblank:596) igt_kms-DEBUG: display: MoveCursor pipe B, (0, 0) (kms_vblank:596) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:596) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 0 (kms_vblank:596) igt_kms-DEBUG: display: SetCrtc pipe C, disabling (kms_vblank:596) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:596) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 17 (kms_vblank:596) igt_kms-DEBUG: display: SetCursor pipe C, disabling (kms_vblank:596) igt_kms-DEBUG: display: MoveCursor pipe C, (0, 0) (kms_vblank:596) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:596) igt_km<14>[ 125.480138] [IGT] kms_vblank: finished subtest pipe-A-Writeback-1, FAIL s-DEBUG:<14>[ 125.480278] [IGT] kms_vblank: finished subtest ts-continuation-suspend, FAIL display<14>[ 125.481673] [IGT] kms_vblank: exiting, ret=98 : Fi<8>[ 125.489327] xing up initial rotation<14>[ 125.513652] [IGT] kms_vblank: executing pipe D, plane 0 (kms_vblank:596) igt_kms-DEBUG: display: SetCrtc pipe D, disabling (kms_vblank:596) igt_kms-DEBUG: Test requireme<14>[ 125.530089] [IGT] kms_vblank: starting subtest ts-continuation-modeset nt passe<14>[ 125.530490] [IGT] kms_vblank: starting dynamic subtest pipe-A-Writeback-1 d: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:596) igt_kms-DEBUG: display: Fixing up initial rotation pipe D, plane 17 (kms_vblank:596) igt_kms-DEBUG: display: SetCursor pipe D, disabling (kms_vblank:596) igt_kms-DEBUG: display: MoveCursor pipe D, (0, 0) (kms_vblank:596) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:596) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 0 (kms_vblank:596) igt_kms-DEBUG: display: SetCrtc pipe E, disabling (kms_vblank:596) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:596) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 17 (kms_vblank:596) igt_kms-DEBUG: display: SetCursor pipe E, disabling (kms_vblank:596) igt_kms-DEBUG: display: MoveCursor pipe E, (0, 0) (kms_vblank:596) igt_kms-DEBUG: display: } (kms_vblank:596) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:596) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:596) igt_kms-CRITICAL: Last errno: 16, Device or resource busy (kms_vblank:596) igt_core-INFO: Stack trace: (kms_vblank:596) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_vblank:596) igt_core-INFO: #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() (kms_vblank:596) igt_core-INFO: #2 [+0xe3841f94] (kms_vblank:596) igt_core-INFO: #3 [+0xe3842fa0] (kms_vblank:596) igt_core-INFO: #4 [+0xe38431bc] (kms_vblank:596) igt_core-INFO: #5 [+0xe3841c78] (kms_vblank:596) igt_core-INFO: #6 [__libc_init_first+0x80] (kms_vblank:596) igt_core-INFO: #7 [__libc_start_main+0x98] (kms_vblank:596) igt_core-INFO: #8 [+0xe3841cb0] **** END **** Dynamic subtest pipe-A-Writeback-1: FAIL (3.789s) Subtest ts-continuation-suspend: FAIL (3.790s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305823 for randomisation Opened device: /dev/dri/card0 Starting subtest: ts-continuation-modeset Starting dynamic subtest: pipe-A-Writeback-1 (kms_vblank:599) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:599) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:599) igt_kms-CRITICAL: Last errno: 16, Device or resource busy Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() #2 [+0xd8891f94] #3 [+0xd8892fa0] #4 [+0xd88931bc] #5 [+0xd8891c78] #6 [__libc_init_first+0x80] #7 [__libc_start_main+0x98] #8 [+0xd8891cb0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** (kms_vblank:599) igt_kms-DEBUG: display: SetProp plane A.4 "rotation" to 0x1/1 (kms_vblank:599) igt_kms-DEBUG: display: SetProp plane A.4 "alpha" to 0xffff/65535 (kms_vblank:599) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:599) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 5 (kms_vblank:599) igt_kms-DEBUG: display: SetPlane pipe A, plane 5, disabling (kms_vblank:599) igt_kms-DEBUG: display: SetProp plane A.5 "rotation" to 0x1/1 (kms_vblank:599) igt_kms-DEBUG: display: SetProp plane A.5 "alpha" to 0xffff/65535 (kms_vblank:599) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:599) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 6 (kms_vblank:599) igt_kms-DEBUG: display: SetPlane pipe A, plane 6, disabling (kms_vblank:599) igt_kms-DEBUG: display: SetProp plane A.6 "rotation" to 0x1/1 (kms_vblank:599) igt_kms-DEBUG: display: SetProp plane A.6 "alpha" to 0xffff/65535 (kms_vblank:599) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:599) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 7 (kms_vblank:599) igt_kms-DEBUG: display: SetPlane pipe A, plane 7, disabling (kms_vblank:599) igt_kms-DEBUG: display: SetProp plane A.7 "rotation" to 0x1/1 (kms_vblank:599) igt_kms-DEBUG: display: SetProp plane A.7 "alpha" to 0xffff/65535 (kms_vblank:599) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:599) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 8 (kms_vblank:599) igt_kms-DEBUG: display: SetPlane pipe A, plane 8, disabling (kms_vblank:599) igt_kms-DEBUG: display: SetProp plane A.8 "rotation" to 0x1/1 (kms_vblank:599) igt_kms-DEBUG: display: SetProp plane A.8 "alpha" to 0xffff/65535 (kms_vblank:599) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:599) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 9 (kms_vblank:599) igt_kms-DEBUG: display: SetPlane pipe A, plane 9, disabling (kms_vblank:599) igt_kms-DEBUG: display: SetProp plane A.9 "rotation" to 0x1/1 (kms_vblank:599) igt_kms-DEBUG: display: SetProp plane A.9 "alpha" to 0xffff/65535 (kms_vblank:599) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:599) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 10 (kms_vblank:599) igt_kms-DEBUG: display: SetPlane pipe A, plane 10, disabling (kms_vblank:599) igt_kms-DEBUG: display: SetProp plane A.10 "rotation" to 0x1/1 (kms_vblank:599) igt_kms-DEBUG: display: SetProp plane A.10 "alpha" to 0xffff/65535 (kms_vblank:599) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:599) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 11 (kms_vblank:599) igt_kms-DEBUG: display: SetPlane pipe A, plane 11, disabling (kms_vblank:599) igt_kms-DEBUG: display: SetProp plane A.11 "rotation" to 0x1/1 (kms_vblank:599) igt_kms-DEBUG: display: SetProp plane A.11 "alpha" to 0xffff/65535 (kms_vblank:599) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:599) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 12 (kms_vblank:599) igt_kms-DEBUG: display: SetPlane pipe A, plane 12, disabling (kms_vblank:599) igt_kms-DEBUG: display: SetProp plane A.12 "rotation" to 0x1/1 (kms_vblank:599) igt_kms-DEBUG: display: SetProp plane A.12 "alpha" to 0xffff/65535 (kms_vblank:599) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:599) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 13 (kms_vblank:599) igt_kms-DEBUG: display: SetPlane pipe A, plane 13, disabling (kms_vblank:599) igt_kms-DEBUG: display: SetProp plane A.13 "rotation" to 0x1/1 (kms_vblank:599) igt_kms-DEBUG: display: SetProp plane A.13 "alpha" to 0xffff/65535 (kms_vblank:599) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:599) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 14 (kms_vblank:599) igt_kms-DEBUG: display: SetPlane pipe A, plane 14, disabling (kms_vblank:599) igt_kms-DEBUG: display: SetProp plane A.14 "rotation" to 0x1/1 (kms_vblank:599) igt_kms-DEBUG: display: SetProp plane A.14 "alpha" to 0xffff/65535 (kms_vblank:599) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:599) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 15 (kms_vblank:599) igt_kms-DEBUG: display: SetPlane pipe A, plane 15, disabling (kms_vblank:599) igt_kms-DEBUG: display: SetProp plane A.15 "rotation" to 0x1/1 (kms_vblank:599) igt_kms-DEBUG: display: SetProp plane A.15 "alpha" to 0xffff/65535 (kms_vblank:599) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:599) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 16 (kms_vblank:599) igt_kms-DEBUG: display: SetPlane pipe A, plane 16, disabling (kms_vblank:599) igt_kms-DEBUG: display: SetProp plane A.16 "rotation" to 0x1/1 (kms_vblank:599) igt_kms-DEBUG: display: SetProp plane A.16 "alpha" to 0xffff/65535 (kms_vblank:599) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:599) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 17 (kms_vblank:599) igt_kms-DEBUG: display: SetCursor pipe A, disabling (kms_vblank:599) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0) (kms_vblank:599) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:599) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 0 (kms_vblank:599) igt_kms-DEBUG: display: SetCrtc pipe B, disabling (kms_vblank:599) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:599) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 17 (kms_vblank:599) igt_kms-DEBUG: display: SetCursor pipe B, disabling (kms_vblank:599) igt_kms-DEBUG: display: MoveCursor pipe B, (0, 0) (kms_vblank:599) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:599) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 0 (kms_vblank:599) igt_kms-DEBUG: display: SetCrtc pipe C, disabling (kms_vblank:599) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:599) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 17 (kms_vblank:599) igt_kms-DEBUG: display: SetCursor pipe C, disabling (kms_vblank:599) igt_kms-DEBUG: display: MoveCursor pipe C, (0, 0) (kms_vblank:599) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:599) igt_km<14>[ 129.320170] [IGT] kms_vblank: finished subtest pipe-A-Writeback-1, FAIL s-DEBUG:<14>[ 129.320306] [IGT] kms_vblank: finished subtest ts-continuation-modeset, FAIL display<14>[ 129.321689] [IGT] kms_vblank: exiting, ret=98 : Fi<8>[ 129.328662] xing up initial rotation<14>[ 129.353652] [IGT] kms_vblank: executing pipe D, plane 0 (kms_vblank:599) igt_kms-DEBUG: display: SetCrtc pipe D, disabling (kms_vblank:599) igt_kms-DEBUG: Test requireme<14>[ 129.370102] [IGT] kms_vblank: starting subtest ts-continuation-modeset-hang nt passe<14>[ 129.370237] [IGT] kms_vblank: finished subtest ts-continuation-modeset-hang, SKIP d: plane<14>[ 129.370387] [IGT] kms_vblank: exiting, ret=77 _idx >= <8>[ 129.375744] 0 && plane_idx <<14>[ 129.402666] [IGT] kms_vblank: executing pipe->n_planes (kms_vblank:599) igt_kms-DEBUG: display: Fixing up initial rotation pipe D, plane 17 (kms_vblank:599) igt_<14>[ 129.419055] [IGT] kms_vblank: starting subtest ts-continuation-modeset-rpm kms-DEBU<14>[ 129.419489] [IGT] kms_vblank: starting dynamic subtest pipe-A-Writeback-1 G: display: SetCursor pipe D, disabling (kms_vblank:599) igt_kms-DEBUG: display: MoveCursor pipe D, (0, 0) (kms_vblank:599) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:599) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 0 (kms_vblank:599) igt_kms-DEBUG: display: SetCrtc pipe E, disabling (kms_vblank:599) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:599) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 17 (kms_vblank:599) igt_kms-DEBUG: display: SetCursor pipe E, disabling (kms_vblank:599) igt_kms-DEBUG: display: MoveCursor pipe E, (0, 0) (kms_vblank:599) igt_kms-DEBUG: display: } (kms_vblank:599) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:599) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:599) igt_kms-CRITICAL: Last errno: 16, Device or resource busy (kms_vblank:599) igt_core-INFO: Stack trace: (kms_vblank:599) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_vblank:599) igt_core-INFO: #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() (kms_vblank:599) igt_core-INFO: #2 [+0xd8891f94] (kms_vblank:599) igt_core-INFO: #3 [+0xd8892fa0] (kms_vblank:599) igt_core-INFO: #4 [+0xd88931bc] (kms_vblank:599) igt_core-INFO: #5 [+0xd8891c78] (kms_vblank:599) igt_core-INFO: #6 [__libc_init_first+0x80] (kms_vblank:599) igt_core-INFO: #7 [__libc_start_main+0x98] (kms_vblank:599) igt_core-INFO: #8 [+0xd8891cb0] **** END **** Dynamic subtest pipe-A-Writeback-1: FAIL (3.790s) Subtest ts-continuation-modeset: FAIL (3.790s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305827 for randomisation Opened device: /dev/dri/card0 Starting subtest: ts-continuation-modeset-hang Test requirement not met in function gem_context_require_bannable, file ../lib/i915/gem_context.c:324: Test requirement: has_ban_period || has_bannable Last errno: 22, Invalid argument Subtest ts-continuation-modeset-hang: SKIP (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305827 for randomisation Opened device: /dev/dri/card0 Starting subtest: ts-continuation-modeset-rpm Starting dynamic subtest: pipe-A-Writeback-1 (kms_vblank:605) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:605) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:605) igt_kms-CRITICAL: Last errno: 16, Device or resource busy Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() #2 [+0xdca61f94] #3 [+0xdca62fa0] #4 [+0xdca631bc] #5 [+0xdca61c78] #6 [__libc_init_first+0x80] #7 [__libc_start_main+0x98] #8 [+0xdca61cb0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** (kms_vblank:605) igt_kms-DEBUG: display: SetProp plane A.4 "rotation" to 0x1/1 (kms_vblank:605) igt_kms-DEBUG: display: SetProp plane A.4 "alpha" to 0xffff/65535 (kms_vblank:605) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:605) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 5 (kms_vblank:605) igt_kms-DEBUG: display: SetPlane pipe A, plane 5, disabling (kms_vblank:605) igt_kms-DEBUG: display: SetProp plane A.5 "rotation" to 0x1/1 (kms_vblank:605) igt_kms-DEBUG: display: SetProp plane A.5 "alpha" to 0xffff/65535 (kms_vblank:605) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:605) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 6 (kms_vblank:605) igt_kms-DEBUG: display: SetPlane pipe A, plane 6, disabling (kms_vblank:605) igt_kms-DEBUG: display: SetProp plane A.6 "rotation" to 0x1/1 (kms_vblank:605) igt_kms-DEBUG: display: SetProp plane A.6 "alpha" to 0xffff/65535 (kms_vblank:605) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:605) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 7 (kms_vblank:605) igt_kms-DEBUG: display: SetPlane pipe A, plane 7, disabling (kms_vblank:605) igt_kms-DEBUG: display: SetProp plane A.7 "rotation" to 0x1/1 (kms_vblank:605) igt_kms-DEBUG: display: SetProp plane A.7 "alpha" to 0xffff/65535 (kms_vblank:605) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:605) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 8 (kms_vblank:605) igt_kms-DEBUG: display: SetPlane pipe A, plane 8, disabling (kms_vblank:605) igt_kms-DEBUG: display: SetProp plane A.8 "rotation" to 0x1/1 (kms_vblank:605) igt_kms-DEBUG: display: SetProp plane A.8 "alpha" to 0xffff/65535 (kms_vblank:605) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:605) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 9 (kms_vblank:605) igt_kms-DEBUG: display: SetPlane pipe A, plane 9, disabling (kms_vblank:605) igt_kms-DEBUG: display: SetProp plane A.9 "rotation" to 0x1/1 (kms_vblank:605) igt_kms-DEBUG: display: SetProp plane A.9 "alpha" to 0xffff/65535 (kms_vblank:605) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:605) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 10 (kms_vblank:605) igt_kms-DEBUG: display: SetPlane pipe A, plane 10, disabling (kms_vblank:605) igt_kms-DEBUG: display: SetProp plane A.10 "rotation" to 0x1/1 (kms_vblank:605) igt_kms-DEBUG: display: SetProp plane A.10 "alpha" to 0xffff/65535 (kms_vblank:605) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:605) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 11 (kms_vblank:605) igt_kms-DEBUG: display: SetPlane pipe A, plane 11, disabling (kms_vblank:605) igt_kms-DEBUG: display: SetProp plane A.11 "rotation" to 0x1/1 (kms_vblank:605) igt_kms-DEBUG: display: SetProp plane A.11 "alpha" to 0xffff/65535 (kms_vblank:605) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:605) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 12 (kms_vblank:605) igt_kms-DEBUG: display: SetPlane pipe A, plane 12, disabling (kms_vblank:605) igt_kms-DEBUG: display: SetProp plane A.12 "rotation" to 0x1/1 (kms_vblank:605) igt_kms-DEBUG: display: SetProp plane A.12 "alpha" to 0xffff/65535 (kms_vblank:605) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:605) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 13 (kms_vblank:605) igt_kms-DEBUG: display: SetPlane pipe A, plane 13, disabling (kms_vblank:605) igt_kms-DEBUG: display: SetProp plane A.13 "rotation" to 0x1/1 (kms_vblank:605) igt_kms-DEBUG: display: SetProp plane A.13 "alpha" to 0xffff/65535 (kms_vblank:605) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:605) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 14 (kms_vblank:605) igt_kms-DEBUG: display: SetPlane pipe A, plane 14, disabling (kms_vblank:605) igt_kms-DEBUG: display: SetProp plane A.14 "rotation" to 0x1/1 (kms_vblank:605) igt_kms-DEBUG: display: SetProp plane A.14 "alpha" to 0xffff/65535 (kms_vblank:605) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:605) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 15 (kms_vblank:605) igt_kms-DEBUG: display: SetPlane pipe A, plane 15, disabling (kms_vblank:605) igt_kms-DEBUG: display: SetProp plane A.15 "rotation" to 0x1/1 (kms_vblank:605) igt_kms-DEBUG: display: SetProp plane A.15 "alpha" to 0xffff/65535 (kms_vblank:605) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:605) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 16 (kms_vblank:605) igt_kms-DEBUG: display: SetPlane pipe A, plane 16, disabling (kms_vblank:605) igt_kms-DEBUG: display: SetProp plane A.16 "rotation" to 0x1/1 (kms_vblank:605) igt_kms-DEBUG: display: SetProp plane A.16 "alpha" to 0xffff/65535 (kms_vblank:605) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:605) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 17 (kms_vblank:605) igt_kms-DEBUG: display: SetCursor pipe A, disabling (kms_vblank:605) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0) (kms_vblank:605) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:605) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 0 (kms_vblank:605) igt_kms-DEBUG: display: SetCrtc pipe B, disabling (kms_vblank:605) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:605) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 17 (kms_vblank:605) igt_kms-DEBUG: display: SetCursor pipe B, disabling (kms_vblank:605) igt_kms-DEBUG: display: MoveCursor pipe B, (0, 0) (kms_vblank:605) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:605) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 0 (kms_vblank:605) igt_kms-DEBUG: display: SetCrtc pipe C, disabling (kms_vblank:605) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:605) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 17 (kms_vblank:605) igt_kms-DEBUG: display: SetCursor pipe C, disabling (kms_vblank:605) igt_kms-DEBUG: display: MoveCursor pipe C, (0, 0) (kms_vblank:605) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && pla<14>[ 133.158711] [IGT] kms_vblank: finished subtest pipe-A-Writeback-1, FAIL ne_idx <<14>[ 133.158853] [IGT] kms_vblank: finished subtest ts-continuation-modeset-rpm, FAIL pipe->n_planes (kms_vblank:605) igt_kms-DEBUG:<14>[ 133.176992] [IGT] kms_vblank: exiting, ret=98 display<8>[ 133.183382] : Fi<8>[ 133.185186] xing up initial rotation pipe D, plane 0 (kms_vblank:605) igt_kms-DEBUG: display: SetCrtc pipe D, disabling (kms_vblank:605) igt_kms-DEBUG: Test r<8>[ 133.208054] equirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:605) igt_kms-DEBUG: display: Fixing up <14>[ 133.226490] [IGT] vc4_create_bo: executing initial <14>[ 133.226878] [IGT] vc4_create_bo: starting subtest create-bo-4096 rotation pipe D, plane 17 (kms_vblank:605) igt_kms-DEBUG: display: SetCursor pipe D, disabl<14>[ 133.245891] [IGT] vc4_create_bo: finished subtest create-bo-4096, FAIL ing (km<14>[ 133.246013] [IGT] vc4_create_bo: exiting, ret=98 s_vblank<8>[ 133.251229] :605) igt_kms-DEBUG: display: MoveCu<14>[ 133.268427] [IGT] vc4_create_bo: executing rsor pip<14>[ 133.268765] [IGT] vc4_create_bo: starting subtest create-bo-0 e D, (0, 0) (kms_vblank:605) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:605) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 0 (kms_vblank:605) igt_kms-DEBUG: display: SetCrtc pipe E, disabling (kms_vblank:605) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:605) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 17 (kms_vblank:605) igt_kms-DEBUG: display: SetCursor pipe E, disabling (kms_vblank:605) igt_kms-DEBUG: display: MoveCursor pipe E, (0, 0) (kms_vblank:605) igt_kms-DEBUG: display: } (kms_vblank:605) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:605) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:605) igt_kms-CRITICAL: Last errno: 16, Device or resource busy (kms_vblank:605) igt_core-INFO: Stack trace: (kms_vblank:605) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_vblank:605) igt_core-INFO: #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() (kms_vblank:605) igt_core-INFO: #2 [+0xdca61f94] (kms_vblank:605) igt_core-INFO: #3 [+0xdca62fa0] (kms_vblank:605) igt_core-INFO: #4 [+0xdca631bc] (kms_vblank:605) igt_core-INFO: #5 [+0xdca61c78] (kms_vblank:605) igt_core-INFO: #6 [__libc_init_first+0x80] (kms_vblank:605) igt_core-INFO: #7 [__libc_start_main+0x98] (kms_vblank:605) igt_core-INFO: #8 [+0xdca61cb0] **** END **** Dynamic subtest pipe-A-Writeback-1: FAIL (3.724s) Subtest ts-continuation-modeset-rpm: FAIL (3.740s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305831 for randomisation Opened device: /dev/dri/card0 Starting subtest: create-bo-4096 (vc4_create_bo:611) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_create_bo:611) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_create_bo:611) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_create_bo:611) igt_vc4-CRITICAL: error: -1 != 0 Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 [igt_vc4_create_bo+0x9c] #2 [+0xc87511d4] #3 [+0xc8750dec] #4 [__libc_init_first+0x80] #5 [__libc_start_main+0x98] #6 [+0xc8750e30] Subtest create-bo-4096 failed. **** DEBUG **** (vc4_create_bo:611) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_create_bo:611) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_create_bo:611) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_create_bo:611) igt_vc4-CRITICAL: error: -1 != 0 (vc4_create_bo:611) igt_core-INFO: Stack trace: (vc4_create_bo:611) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (vc4_create_bo:611) igt_core-INFO: #1 [igt_vc4_create_bo+0x9c] (vc4_create_bo:611) igt_core-INFO: #2 [+0xc87511d4] (vc4_create_bo:611) igt_core-INFO: #3 [+0xc8750dec] (vc4_create_bo:611) igt_core-INFO: #4 [__libc_init_first+0x80] (vc4_create_bo:611) igt_core-INFO: #5 [__libc_start_main+0x98] (vc4_create_bo:611) igt_core-INFO: #6 [+0xc8750e30] **** END **** Subtest create-bo-4096: FAIL (0.019s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305831 for randomisation Opened device: /dev/dri/card0 Starting subtest: create-bo-0 (vc4_create_bo:614) CRITIC<14>[ 133.628491] [IGT] vc4_create_bo: finished subtest create-bo-0, FAIL AL: Test<14>[ 133.628625] [IGT] vc4_create_bo: exiting, ret=98 asserti<8>[ 133.635927] on failure function __igt_unique____real_main27, file ../tests/vc4/vc4_create_bo.c:45: (vc4_create_bo:6<14>[ 133.658823] [IGT] vc4_create_bo: executing 14) CRIT<14>[ 133.659199] [IGT] vc4_create_bo: starting subtest create-bo-zeroed ICAL: Failed assertion: (*__errno_location ()) == 22 (vc4_create_bo:614) CRITICAL: Last errno: 19, No such device (vc4_create_bo:614) <14>[ 133.683196] [IGT] vc4_create_bo: finished subtest create-bo-zeroed, FAIL CRITICAL<14>[ 133.683346] [IGT] vc4_create_bo: exiting, ret=98 : error:<8>[ 133.696422] 19 != 2<8>[ 133.698066] 2 Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 [+0xe9661268] #2 [+0xe9660dec] #3 [__libc_init_first+0x80] #4 <8>[ 133.720036] [__libc_start_main+0x98] #5 [+0xe9660e30] Subtest create-bo-0 failed. **** DEBUG **** (vc4_create_bo:614) CRITICAL: Test assertion failure function __igt<14>[ 133.740605] [IGT] vc4_dmabuf_poll: executing <14>[ 133.741006] [IGT] vc4_dmabuf_poll: starting subtest poll-write-waits-until-write-done _unique____real_main27, file ../tests/vc4/vc4_create_bo.c:45: (vc4_create_bo:614) CRITICAL: Failed assertion: (*__errno_location ()) == 22 (vc4_create_bo:614) CRITICAL: Last errno: 19, No such device (vc4_create_bo:614) CRITICAL: error: 19 != 22 (vc4_create_bo:614) igt_core-INFO: Stack trace: (vc4_create_bo:614) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (vc4_create_bo:614) igt_core-INFO: #1 [+0xe9661268] (vc4_create_bo:614) igt_core-INFO: #2 [+0xe9660dec] (vc4_create_bo:614) igt_core-INFO: #3 [__libc_init_first+0x80] (vc4_create_bo:614) igt_core-INFO: #4 [__libc_start_main+0x98] (vc4_create_bo:614) igt_core-INFO: #5 [+0xe9660e30] **** END **** Subtest create-bo-0: FAIL (0.360s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305831 for randomisation Opened device: /dev/dri/card0 Starting subtest: create-bo-zeroed (vc4_create_bo:617) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_create_bo:617) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_create_bo:617) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_create_bo:617) igt_vc4-CRITICAL: error: -1 != 0 Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 [igt_vc4_create_bo+0x9c] #2 [+0xc6aa110c] #3 [+0xc6aa0dec] #4 [__libc_init_first+0x80] #5 [__libc_start_main+0x98] #6 [+0xc6aa0e30] Subtest create-bo-zeroed failed. **** DEBUG **** (vc4_create_bo:617) drmtest-DEBUG: Force option used: Using driver vc4 (vc4_create_bo:617) drmtest-DEBUG: Opened previously opened device: /dev/dri/card0 (vc4_create_bo:617) drmtest-DEBUG: Test requirement passed: !(fd<0) (vc4_create_bo:617) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_create_bo:617) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_create_bo:617) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_create_bo:617) igt_vc4-CRITICAL: error: -1 != 0 (vc4_create_bo:617) igt_core-INFO: Stack trace: (vc4_create_bo:617) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (vc4_create_bo:617) igt_core-INFO: #1 [igt_vc4_create_bo+0x9c] (vc4_create_bo:617) igt_core-INFO: #2 [+0xc6aa110c] (vc4_create_bo:617) igt_core-INFO: #3 [+0xc6aa0dec] (vc4_create_bo:617) igt_core-INFO: #4 [__libc_init_first+0x80] (vc4_create_bo:617) igt_core-INFO: #5 [__libc_start_main+0x98] (vc4_create_bo:617) igt_core-INFO: #6 [+0xc6aa0e30] **** END **** Subtest create-bo-zeroed: FAIL (0.024s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305831 for randomisation Opened device: /dev/dri/card0 Starting subtest: poll-write-waits-until-write-done (vc4_dmabuf_poll:623) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_dmabuf_poll:623) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_dmabuf_poll:623) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_dmabuf_poll:623) igt_vc4-CRITICAL: error: -1 != 0 Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 [igt_vc4_create_bo+0x9c] #2 ../lib/igt_vc4.c:88 igt_vc4_get_cleared_bo() #3 [+0xe1390f48] #4 [+0xe13911b0] #5 [+0xe1390dec] #6 [__libc_init_first+0x80<14>[ 134.102750] [IGT] vc4_dmabuf_poll: finished subtest poll-write-waits-until-write-done, FAIL ] #7 <14>[ 134.102973] [IGT] vc4_dmabuf_poll: exiting, ret=98 [__libc_<8>[ 134.108591] start_main+0x98] #8 [+0xe139<14>[ 134.128425] [IGT] vc4_dmabuf_poll: executing 0e30] S<14>[ 134.128796] [IGT] vc4_dmabuf_poll: starting subtest poll-read-waits-until-write-done ubtest poll-write-waits-until-write-done failed. **** DEBUG **** (vc4_dmabuf_poll:623) igt_vc4-CRITICAL: Test assertio<14>[ 134.152833] [IGT] vc4_dmabuf_poll: finished subtest poll-read-waits-until-write-done, FAIL n failur<14>[ 134.152951] [IGT] vc4_dmabuf_poll: exiting, ret=98 e functi<8>[ 134.158454] on igt_v<8>[ 134.160287] c4_creat<8>[ 134.183183] e_bo, file ../lib/igt_vc4.c:126: (vc4_dmabuf_poll:623) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('<14>[ 134.202118] [IGT] vc4_label_bo: executing d')) << <14>[ 134.202511] [IGT] vc4_label_bo: starting subtest set-label (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_dmabuf_poll:623) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_dmabuf_poll:623) igt_vc4-CRITICAL: error: -1 != 0 (vc4_dmabuf_poll:623) igt_core-INFO: Stack trace: (vc4_dmabuf_poll:623) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (vc4_dmabuf_poll:623) igt_core-INFO: #1 [igt_vc4_create_bo+0x9c] (vc4_dmabuf_poll:623) igt_core-INFO: #2 ../lib/igt_vc4.c:88 igt_vc4_get_cleared_bo() (vc4_dmabuf_poll:623) igt_core-INFO: #3 [+0xe1390f48] (vc4_dmabuf_poll:623) igt_core-INFO: #4 [+0xe13911b0] (vc4_dmabuf_poll:623) igt_core-INFO: #5 [+0xe1390dec] (vc4_dmabuf_poll:623) igt_core-INFO: #6 [__libc_init_first+0x80] (vc4_dmabuf_poll:623) igt_core-INFO: #7 [__libc_start_main+0x98] (vc4_dmabuf_poll:623) igt_core-INFO: #8 [+0xe1390e30] **** END **** Subtest poll-write-waits-until-write-done: FAIL (0.362s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305832 for randomisation Opened device: /dev/dri/card0 Starting subtest: poll-read-waits-until-write-done (vc4_dmabuf_poll:626) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_dmabuf_poll:626) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_dmabuf_poll:626) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_dmabuf_poll:626) igt_vc4-CRITICAL: error: -1 != 0 Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 [igt_vc4_create_bo+0x9c] #2 ../lib/igt_vc4.c:88 igt_vc4_get_cleared_bo() #3 [+0xd0dd0f48] #4 [+0xd0dd1188] #5 [+0xd0dd0dec] #6 [__libc_init_first+0x80] #7 [__libc_start_main+0x98] #8 [+0xd0dd0e30] Subtest poll-read-waits-until-write-done failed. **** DEBUG **** (vc4_dmabuf_poll:626) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_dmabuf_poll:626) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_dmabuf_poll:626) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_dmabuf_poll:626) igt_vc4-CRITICAL: error: -1 != 0 (vc4_dmabuf_poll:626) igt_core-INFO: Stack trace: (vc4_dmabuf_poll:626) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (vc4_dmabuf_poll:626) igt_core-INFO: #1 [igt_vc4_create_bo+0x9c] (vc4_dmabuf_poll:626) igt_core-INFO: #2 ../lib/igt_vc4.c:88 igt_vc4_get_cleared_bo() (vc4_dmabuf_poll:626) igt_core-INFO: #3 [+0xd0dd0f48] (vc4_dmabuf_poll:626) igt_core-INFO: #4 [+0xd0dd1188] (vc4_dmabuf_poll:626) igt_core-INFO: #5 [+0xd0dd0dec] (vc4_dmabuf_poll:626) igt_core-INFO: #6 [__libc_init_first+0x80] (vc4_dmabuf_poll:626) igt_core-INFO: #7 [__libc_start_main+0x98] (vc4_dmabuf_poll:626) igt_core-INFO: #8 [+0xd0dd0e30] **** END **** Subtest poll-read-waits-until-write-done: FAIL (0.024s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305832 for randomisation Opened device: /dev/dri/card0 Starting subtest: set-label (vc4_label_bo:632) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_label_bo:632) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_label_bo:632) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_label_bo:632) igt_vc4-CRITICAL: error: -1 != 0 Stack trace: #0 ../lib/igt_core.<14>[ 134.563801] [IGT] vc4_label_bo: finished subtest set-label, FAIL c:1989 _<14>[ 134.563998] [IGT] vc4_label_bo: exiting, ret=98 _igt_fai<8>[ 134.568967] l_assert() #1 [igt_vc4_create_bo+0x9c] #2 <14>[ 134.587635] [IGT] vc4_label_bo: executing [[ 134.588033] [IGT] vc4_label_bo: starting subtest set-bad-handle n>+0xdae<3>[ 134.588081] [drm:vc4_label_bo_ioctl [vc4]] *ERROR* Failed to look up GEM BO -791621424 112c0] <14>[ 134.588179] [IGT] vc4_label_bo: finished subtest set-bad-handle, SUCCESS #3 [[ 134.588292] [IGT] vc4_label_bo: exiting, ret=0 nknown>+<8>[ 134.593737] 0xdae10d<14>[ 134.620122] [IGT] vc4_label_bo: executing 6c] #4 [__lib<14>[ 134.638903] [IGT] vc4_label_bo: starting subtest set-bad-name c_init_first+0x80] #5 [__libc_start_main+0x98] #6 [+0xdae10db0] Subtest set-label failed. **** DEBUG **** (vc4_label_b<14>[ 134.656211] [IGT] vc4_label_bo: finished subtest set-bad-name, FAIL o:632) i<14>[ 134.656332] [IGT] vc4_label_bo: exiting, ret=98 gt_vc4-C<8>[ 134.661515] RITICAL: Test as<14>[ 134.678401] [IGT] vc4_label_bo: executing sertion <14>[ 134.678772] [IGT] vc4_label_bo: starting subtest set-kernel-name failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_label_bo:632) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_label_bo:632) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_label_bo:632) igt_vc4-CRITICAL: error: -1 != 0 (vc4_label_bo:632) igt_core-INFO: Stack trace: (vc4_label_bo:632) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (vc4_label_bo:632) igt_core-INFO: #1 [igt_vc4_create_bo+0x9c] (vc4_label_bo:632) igt_core-INFO: #2 [+0xdae112c0] (vc4_label_bo:632) igt_core-INFO: #3 [+0xdae10d6c] (vc4_label_bo:632) igt_core-INFO: #4 [__libc_init_first+0x80] (vc4_label_bo:632) igt_core-INFO: #5 [__libc_start_main+0x98] (vc4_label_bo:632) igt_core-INFO: #6 [+0xdae10db0] **** END **** Subtest set-label: FAIL (0.361s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305832 for randomisation Opened device: /dev/dri/card0 Starting subtest: set-bad-handle Subtest set-bad-handle: SUCCESS (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305832 for randomisation Opened device: /dev/dri/card0 Starting subtest: set-bad-name (vc4_label_bo:638) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_label_bo:638) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_label_bo:638) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_label_bo:638) igt_vc4-CRITICAL: error: -1 != 0 Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 [igt_vc4_create_bo+0x9c] #2 [+0xb8af1234] #3 [+0xb8af0d6c] #4 [__libc_init_first+0x80] #5 [__libc_start_main+0x98] #6 [+0xb8af0db0] Subtest set-bad-name failed. **** DEBUG **** (vc4_label_bo:638) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_label_bo:638) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_label_bo:638) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_label_bo:638) igt_vc4-CRITICAL: error: -1 != 0 (vc4_label_bo:638) igt_core-INFO: Stack trace: (vc4_label_bo:638) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (vc4_label_bo:638) igt_core-INFO: #1 [igt_vc4_create_bo+0x9c] (vc4_label_bo:638) igt_core-INFO: #2 [+0xb8af1234] (vc4_label_bo:638) igt_core-INFO: #3 [+0xb8af0d6c] (vc4_label_bo:638) igt_core-INFO: #4 [__libc_init_first+0x80] (vc4_label_bo:638) igt_core-INFO: #5 [__libc_start_main+0x98] (vc4_label_bo:638) igt_core-INFO: #6 [+0xb8af0db0] **** END **** Subtest set-bad-name: FAIL (0.017s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305832 for randomisation Opened device: /dev/dri/card0 Starting subtest: set-kernel-name (vc4_label_bo:641) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_label_bo:641) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_label_bo:641) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_label_bo:641) igt_vc4-CRITICAL: error: -1 != 0 Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 [igt_vc4_create_bo+0x9c] #2 [[ 135.036301] [IGT] vc4_label_bo: finished subtest set-kernel-name, FAIL wn>+0xdd<14>[ 135.036548] [IGT] vc4_label_bo: exiting, ret=98 8811a8] <8>[ 135.042217] #3 [<<8>[ 135.043643] unknown><8>[ 135.063503] +0xdd880d6c] #4 [__libc_init_first+0x80] #5 [__libc_start_main+0x98] #6 [+0xdd880db0] Subtest set-kernel-name failed. **** D<14>[ 135.082008] [IGT] vc4_lookup_fail: executing EBUG ***<14>[ 135.082380] [IGT] vc4_lookup_fail: starting subtest bad-color-write * (vc4_label_bo:641) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_labe<14>[ 135.104696] [IGT] vc4_lookup_fail: finished subtest bad-color-write, FAIL l_bo:641<14>[ 135.104813] [IGT] vc4_lookup_fail: exiting, ret=98 ) igt_vc<8>[ 135.109906] 4-CRITIC<8>[ 135.111168] AL: Fail<8>[ 135.131427] ed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)<14>[ 135.149711] [IGT] vc4_mmap: executing ))) << (<14>[ 135.150100] [IGT] vc4_mmap: starting subtest mmap-bad-handle (0+8)+8)<14>[ 135.150185] [IGT] vc4_mmap: finished subtest mmap-bad-handle, SUCCESS ))), (&c<14>[ 135.150301] [IGT] vc4_mmap: exiting, ret=0 reate)) <8>[ 135.156000] == 0 (v<14>[ 135.175351] [IGT] vc4_mmap: executing c4_label_bo:641) igt_vc4-CRITICAL: Last <14>[ 135.188380] [IGT] vc4_mmap: starting subtest mmap-bo errno: 19, No such device (vc4_label_bo:641) igt_vc4-CRITICAL: error: -1 != 0 (vc4_label_bo:641) igt_core-INFO: Stack trace: (vc4_label_bo:641) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (vc4_label_bo:641) igt_core-INFO: #1 [igt_vc4_create_bo+0x9c] (vc4_label_bo:641) igt_core-INFO: #2 [+0xdd8811a8] (vc4_label_bo:641) igt_core-INFO: #3 [+0xdd880d6c] (vc4_label_bo:641) igt_core-INFO: #4 [__libc_init_first+0x80] (vc4_label_bo:641) igt_core-INFO: #5 [__libc_start_main+0x98] (vc4_label_bo:641) igt_core-INFO: #6 [+0xdd880db0] **** END **** Subtest set-kernel-name: FAIL (0.357s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305833 for randomisation Opened device: /dev/dri/card0 Starting subtest: bad-color-write (vc4_lookup_fail:647) CRITICAL: Test assertion failure function __igt_unique____real_main28, file ../tests/vc4/vc4_lookup_fail.c:66: (vc4_lookup_fail:647) CRITICAL: Failed assertion: (*__errno_location ()) == 22 (vc4_lookup_fail:647) CRITICAL: Last errno: 19, No such device (vc4_lookup_fail:647) CRITICAL: error: 19 != 22 Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 [+0xb7720e84] #2 [+0xb7720b6c] #3 [__libc_init_first+0x80] #4 [__libc_start_main+0x98] #5 [+0xb7720bb0] Subtest bad-color-write failed. **** DEBUG **** (vc4_lookup_fail:647) CRITICAL: Test assertion failure function __igt_unique____real_main28, file ../tests/vc4/vc4_lookup_fail.c:66: (vc4_lookup_fail:647) CRITICAL: Failed assertion: (*__errno_location ()) == 22 (vc4_lookup_fail:647) CRITICAL: Last errno: 19, No such device (vc4_lookup_fail:647) CRITICAL: error: 19 != 22 (vc4_lookup_fail:647) igt_core-INFO: Stack trace: (vc4_lookup_fail:647) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (vc4_lookup_fail:647) igt_core-INFO: #1 [+0xb7720e84] (vc4_lookup_fail:647) igt_core-INFO: #2 [+0xb7720b6c] (vc4_lookup_fail:647) igt_core-INFO: #3 [__libc_init_first+0x80] (vc4_lookup_fail:647) igt_core-INFO: #4 [__libc_start_main+0x98] (vc4_lookup_fail:647) igt_core-INFO: #5 [+0xb7720bb0] **** END **** Subtest bad-color-write: FAIL (0.022s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305833 for randomisation Opened device: /dev/dri/card0 Starting subtest: mmap-bad-handle Subtest mmap-bad-handle: SUCCESS (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305833 for randomisation Opened device: /dev/dri/card0 Starting subtest: mmap-bo (vc4_mmap:656) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_mmap:656) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_mmap:656) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_mmap:656) igt_vc4-CRITICAL: error: -1 != 0 Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 [igt_vc4_create_bo+0x9c] #2 [+0xc095122c] #3 [+0xc0950eec] #4 [__libc_init_first+0x80] #5 [__libc_start_main+0x98] #6 [+0xc0950f30] Subtest mmap-bo failed. **** DEBUG **** (vc4_mmap:656) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_mmap:656) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_mmap:656) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_mmap:656) igt_vc4-CRITICAL: error: -1 != 0 (vc4_mmap:656) igt_core-INFO: Stack tra<14>[ 135.541723] [IGT] vc4_mmap: finished subtest mmap-bo, FAIL ce: (vc<14>[ 135.541936] [IGT] vc4_mmap: exiting, ret=98 4_mmap:6<8>[ 135.551406] <8>[ 135.553017] 56) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (vc4_mmap:656) igt_core-INFO: #1 [<8>[ 135.571776] igt_vc4_create_bo+0x9c] (vc4_mmap:656) igt_core-INFO: #2 [+0xc095122c] (vc4_mmap:656) igt_core-INFO: #3 [+0xc0950eec] (vc4_mmap:656) igt_core-INFO: #4 [__libc_init_first+0x8<8>[ 135.598322] 0] (vc4_mmap:656) igt_core-INFO: #5 [__libc_start_main+0x98] (vc4_mmap:656) igt_core-INFO: #6 [+0xc0950f30] **** END **** Subtest mmap-bo<14>[ 135.617002] [IGT] vc4_purgeable_bo: executing : FAIL (<14>[ 135.617429] [IGT] vc4_purgeable_bo: exiting, ret=77 0.353s)<8>[ 135.622678] [0m /usr/bin/igt-parser.sh: 73: vc4_prefmon: not found /usr/bi<14>[ 135.641570] [IGT] vc4_purgeable_bo: executing n/igt-pa<14>[ 135.641996] [IGT] vc4_purgeable_bo: exiting, ret=77 rser.sh:<8>[ 135.647266] 83: vc4_prefmon: not found WARNING: unhandled exit status: 127 IGT-Version: 1<14>[ 135.667501] [IGT] vc4_purgeable_bo: executing .28-ga44<14>[ 135.667950] [IGT] vc4_purgeable_bo: exiting, ret=77 ebfe (aa<8>[ 135.673555] rch64) (Linux: 5.10.218-cip49-rt<14>[ 135.690781] [IGT] vc4_purgeable_bo: executing 20 aarch<14>[ 135.691227] [IGT] vc4_purgeable_bo: exiting, ret=77 64) Usi<8>[ 135.701981] ng IGT_SRANDOM=1706305833 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function __igt_unique___<14>[ 135.720273] [IGT] vc4_purgeable_bo: executing _real_ma<14>[ 135.720695] [IGT] vc4_purgeable_bo: exiting, ret=77 in97, fi<8>[ 135.725920] le ../tests/vc4/vc4_purgeable_bo.c:106: Test requirement: igt_v<14>[ 135.745986] [IGT] vc4_purgeable_bo: executing c4_get_p<14>[ 135.746401] [IGT] vc4_purgeable_bo: exiting, ret=77 aram(fd,<8>[ 135.751672] DRM_VC4_PARAM_SUPPORTS_MADVISE) Last errno: 19<14>[ 135.768806] [IGT] vc4_purgeable_bo: executing , No suc<14>[ 135.769226] [IGT] vc4_purgeable_bo: exiting, ret=77 h device<8>[ 135.774602] Subtest mark-willneed: SKIP (0.000s) <14>[ 135.791813] [IGT] vc4_purgeable_bo: executing IGT-Vers<14>[ 135.792218] [IGT] vc4_purgeable_bo: exiting, ret=77 ion: 1.2<8>[ 135.797404] 8-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20<14>[ 135.815579] [IGT] vc4_purgeable_bo: executing aarch64<14>[ 135.815978] [IGT] vc4_purgeable_bo: exiting, ret=77 ) Using<8>[ 135.820876] IGT_SRA<8>[ 135.822306] NDOM=170<8>[ 135.841083] 6305833 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function __igt_unique____real_main<14>[ 135.856882] [IGT] vc4_tiling: executing 97, file<14>[ 135.857217] [IGT] vc4_tiling: starting subtest get-bad-handle ../test<14>[ 135.857287] [IGT] vc4_tiling: finished subtest get-bad-handle, SUCCESS s/vc4/vc<14>[ 135.857381] [IGT] vc4_tiling: exiting, ret=0 4_purgea<8>[ 135.862147] ble_bo.c<14>[ 135.878563] [IGT] vc4_tiling: executing :106: Test requirement: igt_vc4<14>[ 135.896949] [IGT] vc4_tiling: starting subtest set-bad-handle _get_par<14>[ 135.897021] [IGT] vc4_tiling: finished subtest set-bad-handle, SUCCESS am(fd, D<14>[ 135.897110] [IGT] vc4_tiling: exiting, ret=0 RM_VC4_P<8>[ 135.901792] ARAM_SUP<14>[ 135.918834] [IGT] vc4_tiling: executing PORTS_MADVISE) Last errno: 19, No such device <14>[ 135.931875] [IGT] vc4_tiling: starting subtest get-bad-flags Subtest mark-purgeable: SKIP (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305833 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function __igt_unique____real_main97, file ../tests/vc4/vc4_purgeable_bo.c:106: Test requirement: igt_vc4_get_param(fd, DRM_VC4_PARAM_SUPPORTS_MADVISE) Last errno: 19, No such device Subtest mark-purgeable-twice: SKIP (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305833 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function __igt_unique____real_main97, file ../tests/vc4/vc4_purgeable_bo.c:106: Test requirement: igt_vc4_get_param(fd, DRM_VC4_PARAM_SUPPORTS_MADVISE) Last errno: 19, No such device Subtest mark-unpurgeable-twice: SKIP (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305833 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function __igt_unique____real_main97, file ../tests/vc4/vc4_purgeable_bo.c:106: Test requirement: igt_vc4_get_param(fd, DRM_VC4_PARAM_SUPPORTS_MADVISE) Last errno: 19, No such device Subtest access-purgeable-bo-mem: SKIP (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305833 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function __igt_unique____real_main97, file ../tests/vc4/vc4_purgeable_bo.c:106: Test requirement: igt_vc4_get_param(fd, DRM_VC4_PARAM_SUPPORTS_MADVISE) Last errno: 19, No such device Subtest access-purged-bo-mem: SKIP (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305833 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function __igt_unique____real_main97, file ../tests/vc4/vc4_purgeable_bo.c:106: Test requirement: igt_vc4_get_param(fd, DRM_VC4_PARAM_SUPPORTS_MADVISE) Last errno: 19, No such device Subtest mark-unpurgeable-check-retained: SKIP (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305833 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function __igt_unique____real_main97, file ../tests/vc4/vc4_purgeable_bo.c:106: Test requirement: igt_vc4_get_param(fd, DRM_VC4_PARAM_SUPPORTS_MADVISE) Last errno: 19, No such device Subtest mark-unpurgeable-purged: SKIP (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305833 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function __igt_unique____real_main97, file ../tests/vc4/vc4_purgeable_bo.c:106: Test requirement: igt_vc4_get_param(fd, DRM_VC4_PARAM_SUPPORTS_MADVISE) Last errno: 19, No such device Subtest free-purged-bo: SKIP (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305833 for randomisation Opened device: /dev/dri/card0 Starting subtest: get-bad-handle Subtest get-bad-handle: SUCCESS (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305833 for randomisation Opened device: /dev/dri/card0 Starting subtest: set-bad-handle Subtest set-bad-handle: SUCCESS (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305833 for randomisation Opened device: /dev/dri/card0 Starting subtest: get-bad-flags (vc4_tiling:701) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_tiling:701) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm<14>[ 136.287681] [IGT] vc4_tiling: finished subtest get-bad-flags, FAIL _vc4_cre<14>[ 136.287801] [IGT] vc4_tiling: exiting, ret=98 ate_bo))<8>[ 136.292736] )) << ((0+8)+8)))), (&create)) == 0 (vc4_tiling:701) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_til<14>[ 136.317176] [IGT] vc4_tiling: executing ing:701)<14>[ 136.317547] [IGT] vc4_tiling: starting subtest set-bad-flags igt_vc4-CRITICAL: error: -1 != 0 Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert()<14>[ 136.337722] [IGT] vc4_tiling: finished subtest set-bad-flags, FAIL #1 [<14>[ 136.337834] [IGT] vc4_tiling: exiting, ret=98 igt_vc4_<8>[ 136.342497] create_bo+0x9c] #2 [+0xcad41080] <14>[ 136.359658] [IGT] vc4_tiling: executing #3 [[ 136.360015] [IGT] vc4_tiling: starting subtest get-bad-modifier nown>+0xcad40dac] #4 [__libc_init_first+0x80] #5 [__libc_start_main+0x98] #6 [+0xcad40df0] Subtest get-bad-flags failed. **** DEBUG **** (vc4_tiling:701) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_tiling:701) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_tiling:701) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_tiling:701) igt_vc4-CRITICAL: error: -1 != 0 (vc4_tiling:701) igt_core-INFO: Stack trace: (vc4_tiling:701) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (vc4_tiling:701) igt_core-INFO: #1 [igt_vc4_create_bo+0x9c] (vc4_tiling:701) igt_core-INFO: #2 [+0xcad41080] (vc4_tiling:701) igt_core-INFO: #3 [+0xcad40dac] (vc4_tiling:701) igt_core-INFO: #4 [__libc_init_first+0x80] (vc4_tiling:701) igt_core-INFO: #5 [__libc_start_main+0x98] (vc4_tiling:701) igt_core-INFO: #6 [+0xcad40df0] **** END **** Subtest get-bad-flags: FAIL (0.356s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305834 for randomisation Opened device: /dev/dri/card0 Starting subtest: set-bad-flags (vc4_tiling:704) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_tiling:704) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_tiling:704) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_tiling:704) igt_vc4-CRITICAL: error: -1 != 0 Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 [igt_vc4_create_bo+0x9c] #2 [+0xace81138] #3 [+0xace80dac] #4 [__libc_init_first+0x80] #5 [__libc_start_main+0x98] #6 [+0xace80df0] Subtest set-bad-flags failed. **** DEBUG **** (vc4_tiling:704) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_tiling:704) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_tiling:704) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_tiling:704) igt_vc4-CRITICAL: error: -1 != 0 (vc4_tiling:704) igt_core-INFO: Stack trace: (vc4_tiling:704) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (vc4_tiling:704) igt_core-INFO: #1 [igt_vc4_create_bo+0x9c] (vc4_tiling:704) igt_core-INFO: #2 [+0xace81138] (vc4_tiling:704) igt_core-INFO: #3 [+0xace80dac] (vc4_tiling:704) igt_core-INFO: #4 [__libc_init_first+0x80] (vc4_tiling:704) igt_core-INFO: #5 [__libc_start_main+0x98] (vc4_tiling:704) igt_core-INFO: #6 [+0xace80df0] **** END **** Subtest set-bad-flags: FAIL (0.020s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305834 for randomisation Opened device: /dev/dri/card0 Starting subtest: get-bad-modifier (vc4_tiling:707) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_tiling:707) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_tiling:707) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_tiling:707) igt_vc4-CRITICAL: error: -1 != 0 Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 [igt_vc4_create_bo+0x9c] #2 [+0xe3691358] #3 [+0xe3690dac] #4 [__libc_init_first+0x80] #5 [__libc_st<14>[ 136.719998] [IGT] vc4_tiling: finished subtest get-bad-modifier, FAIL art_main<14>[ 136.720212] [IGT] vc4_tiling: exiting, ret=98 +0x98] <8>[ 136.725867] #6 [+0xe3690df0] Subtest get<14>[ 136.744734] [IGT] vc4_tiling: executing -bad-mod<14>[ 136.745113] [IGT] vc4_tiling: starting subtest set-bad-modifier ifier failed. **** DEBUG **** (vc4_tiling:707) igt_vc4-CRITICAL: Test assertion failure functi<14>[ 136.765982] [IGT] vc4_tiling: finished subtest set-bad-modifier, FAIL on igt_v<14>[ 136.766099] [IGT] vc4_tiling: exiting, ret=98 c4_creat<8>[ 136.771054] e_bo, file ../lib/igt_vc4.c:126: (vc4_t<14>[ 136.788509] [IGT] vc4_tiling: executing iling:70<14>[ 136.788934] [IGT] vc4_tiling: starting subtest set-get 7) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_tiling:707) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_tiling:707) igt_vc4-CRITICAL: error: -1 != 0 (vc4_tiling:707) igt_core-INFO: Stack trace: (vc4_tiling:707) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (vc4_tiling:707) igt_core-INFO: #1 [igt_vc4_create_bo+0x9c] (vc4_tiling:707) igt_core-INFO: #2 [+0xe3691358] (vc4_tiling:707) igt_core-INFO: #3 [+0xe3690dac] (vc4_tiling:707) igt_core-INFO: #4 [__libc_init_first+0x80] (vc4_tiling:707) igt_core-INFO: #5 [__libc_start_main+0x98] (vc4_tiling:707) igt_core-INFO: #6 [+0xe3690df0] **** END **** Subtest get-bad-modifier: FAIL (0.360s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305834 for randomisation Opened device: /dev/dri/card0 Starting subtest: set-bad-modifier (vc4_tiling:710) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_tiling:710) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_tiling:710) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_tiling:710) igt_vc4-CRITICAL: error: -1 != 0 Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 [igt_vc4_create_bo+0x9c] #2 [+0xe1a013ec] #3 [+0xe1a00dac] #4 [__libc_init_first+0x80] #5 [__libc_start_main+0x98] #6 [+0xe1a00df0] Subtest set-bad-modifier failed. **** DEBUG **** (vc4_tiling:710) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_tiling:710) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_tiling:710) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_tiling:710) igt_vc4-CRITICAL: error: -1 != 0 (vc4_tiling:710) igt_core-INFO: Stack trace: (vc4_tiling:710) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (vc4_tiling:710) igt_core-INFO: #1 [igt_vc4_create_bo+0x9c] (vc4_tiling:710) igt_core-INFO: #2 [+0xe1a013ec] (vc4_tiling:710) igt_core-INFO: #3 [+0xe1a00dac] (vc4_tiling:710) igt_core-INFO: #4 [__libc_init_first+0x80] (vc4_tiling:710) igt_core-INFO: #5 [__libc_start_main+0x98] (vc4_tiling:710) igt_core-INFO: #6 [+0xe1a00df0] **** END **** Subtest set-bad-modifier: FAIL (0.021s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305834 for randomisation Opened device: /dev/dri/card0 Starting subtest: set-get (vc4_tiling:713) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_tiling:713) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_tiling:713) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_tiling:713) igt_vc4-CRITICAL: error: -1 != 0 Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 [igt_vc4_create_bo+0x9c] #2 [+0xb6f314dc] #3 [+0xb6f30dac] #4 [__libc_init_first+0x80] #5 [__libc_start_main+0x98] #6 [+0xb6f30df0] Subtest set-get failed. **** DEBUG **** (vc4_tiling:713) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_tiling:713) igt_vc4-CRITICAL: Failed <14>[ 137.145907] [IGT] vc4_tiling: finished subtest set-get, FAIL assertio<14>[ 137.146124] [IGT] vc4_tiling: exiting, ret=98 n: igt_i<8>[ 137.151704] octl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (<14>[ 137.168740] [IGT] vc4_tiling: executing 0+8)) | <14>[ 137.169111] [IGT] vc4_tiling: starting subtest get-after-free (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_<14>[ 137.189179] [IGT] vc4_tiling: finished subtest get-after-free, FAIL tiling:7<14>[ 137.189289] [IGT] vc4_tiling: exiting, ret=98 13) igt_<8>[ 137.194203] vc4-CRIT<8>[ 137.195675] ICAL: Last errno: 19, No such de<8>[ 137.218827] vice (vc4_tiling:713) igt_vc4-CRITICAL: error: -1 != 0 (vc4_tiling:713) igt_core-INFO: Stack trace: (vc4_tiling:713) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt<14>[ 137.238405] [IGT] vc4_wait_bo: executing _fail_assert() (vc4_tiling:713) igt_core-INFO: #1 [igt_vc4_create_bo+0x9c] (vc4_tiling:713) igt_core-INFO: #2 [+0xb6f314dc] (vc4_tiling:713) igt_core-INFO: #3 [+0xb6f30dac] (vc4_tiling:713) igt_core-INFO: #4 [__libc_init_first+0x80] (vc4_tiling:713) igt_core-INFO: #5 [__libc_start_main+0x98] (vc4_tiling:713) igt_core-INFO: #6 [+0xb6f30df0] **** END **** Subtest set-get: FAIL (0.357s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305835 for randomisation Opened device: /dev/dri/card0 Starting subtest: get-after-free (vc4_tiling:716) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_tiling:716) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_tiling:716) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_tiling:716) igt_vc4-CRITICAL: error: -1 != 0 Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 [igt_vc4_create_bo+0x9c] #2 [+0xc5801474] #3 [+0xc5800dac] #4 [__libc_init_first+0x80] #5 [__libc_start_main+0x98] #6 [+0xc5800df0] Subtest get-after-free failed. **** DEBUG **** (vc4_tiling:716) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_tiling:716) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_tiling:716) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_tiling:716) igt_vc4-CRITICAL: error: -1 != 0 (vc4_tiling:716) igt_core-INFO: Stack trace: (vc4_tiling:716) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (vc4_tiling:716) igt_core-INFO: #1 [igt_vc4_create_bo+0x9c] (vc4_tiling:716) igt_core-INFO: #2 [+0xc5801474] (vc4_tiling:716) igt_core-INFO: #3 [+0xc5800dac] (vc4_tiling:716) igt_core-INFO: #4 [__libc_init_first+0x80] (vc4_tiling:716) igt_core-INFO: #5 [__libc_start_main+0x98] (vc4_tiling:716) igt_core-INFO: #6 [+0xc5800df0] **** END **** Subtest get-after-free: FAIL (0.020s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305835 for randomisation Opened device: /dev/dri/card0 (vc4_wait_bo:722) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_wait_bo:722) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_wait_bo:722) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_wait_bo:722) igt_vc4-CRITICAL: error: -1 != 0 Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 [igt_vc4_create_bo+0x9c] #2 [+0xdbea149c] #3 [+0xdbea0e2c] #4 [__libc_init_first+0x80] #5 [__libc_start_main+0x98] #6 [+0xdbea0e70] Test vc4_wait_bo failed. **** DEBUG **** (vc4_wait_bo:722) igt_core-INFO: IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) (vc4_wait_bo:722) igt_core-INFO: Using IGT_SRANDOM=1706305835 for randomisation (vc4_wait_bo:722) drmtest-DEBUG: Force option used: Using driver vc4 (vc4_wait_bo:722) drmtest-INFO: Opened device: /dev/dri/card0 (vc4_wait_bo:722) drmtest-DEBUG: Test requirement passed: !(fd<0) (vc4_wait_bo:722) DEBUG: Test requirement passed: igt_vc4_is_v3d(fd) (vc4_wait_bo:722) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_wait_bo:722) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0<14>[ 137.593285] [IGT] vc4_wait_bo: exiting, ret=98 x40 + 0x<8>[ 137.598989] 03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_wait_bo:722) igt_vc4-CRITICAL: Last errno: 1<14>[ 137.616062] [IGT] vc4_wait_bo: executing 9, No such device (vc4_wait_bo:722) igt_vc4-CRITICAL: error: -1 != 0 (vc4_wait_bo:722) igt_core-INFO: Stack trace: (vc4_wait_<14>[ 137.631437] [IGT] vc4_wait_bo: exiting, ret=98 bo:722) <8>[ 137.636770] igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (vc4_wait_bo:722) igt_co<14>[ 137.654875] [IGT] vc4_wait_bo: executing re-INFO: #1 [igt_vc4_create_bo+0x9c] (vc4_wait_bo:722) igt_core-INFO: #2 [+0xdbea149c] (vc4_wait_bo:722) igt_core-INFO: #3 [+0xdbea0e2c] (vc4_wait_bo:722) igt_core-INFO: #4 [__libc_init_first+0x80] (vc4_wait_bo:722) igt_core-INFO: #5 [__libc_start_main+0x98] (vc4_wait_bo:722) igt_core-INFO: #6 [+0xdbea0e70] **** END **** Subtest bad-bo: FAIL (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305835 for randomisation Opened device: /dev/dri/card0 (vc4_wait_bo:725) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_wait_bo:725) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_wait_bo:725) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_wait_bo:725) igt_vc4-CRITICAL: error: -1 != 0 Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 [igt_vc4_create_bo+0x9c] #2 [+0xaedd149c] #3 [+0xaedd0e2c] #4 [__libc_init_first+0x80] #5 [__libc_start_main+0x98] #6 [+0xaedd0e70] Test vc4_wait_bo failed. **** DEBUG **** (vc4_wait_bo:725) igt_core-INFO: IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) (vc4_wait_bo:725) igt_core-INFO: Using IGT_SRANDOM=1706305835 for randomisation (vc4_wait_bo:725) drmtest-DEBUG: Force option used: Using driver vc4 (vc4_wait_bo:725) drmtest-INFO: Opened device: /dev/dri/card0 (vc4_wait_bo:725) drmtest-DEBUG: Test requirement passed: !(fd<0) (vc4_wait_bo:725) DEBUG: Test requirement passed: igt_vc4_is_v3d(fd) (vc4_wait_bo:725) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_wait_bo:725) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_wait_bo:725) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_wait_bo:725) igt_vc4-CRITICAL: error: -1 != 0 (vc4_wait_bo:725) igt_core-INFO: Stack trace: (vc4_wait_bo:725) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (vc4_wait_bo:725) igt_core-INFO: #1 [igt_vc4_create_bo+0x9c] (vc4_wait_bo:725) igt_core-INFO: #2 [+0xaedd149c] (vc4_wait_bo:725) igt_core-INFO: #3 [+0xaedd0e2c] (vc4_wait_bo:725) igt_core-INFO: #4 [__libc_init_first+0x80] (vc4_wait_bo:725) igt_core-INFO: #5 [__libc_start_main+0x98] (vc4_wait_bo:725) igt_core-INFO: #6 [+0xaedd0e70] **** END **** Subtest bad-pad: FAIL (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305835 for randomisation Opened device: /dev/dri/card0 (vc4_wait_bo:728) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_wait_bo:728) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_wait_bo:728) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_wait_bo:728) igt_vc4-CRITICAL: error: -1 != 0 Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 [igt_vc4_create_bo+0x9c] #2 [+0xc651149c] #3 [+0xc6510e2c] #4 [__libc_init_first+0x80] #5 [__libc_start_main+0x98] #6 [+0xc6510e70] Test vc4_wait_bo failed. **** DEBUG **** (vc4_wait_bo:728) igt_core-INFO: IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) (vc4_wait_bo:728) igt_core-INFO: Using IGT_SRANDOM=1706305835 for randomisation (vc4_wait_bo:728) drmtest-DEBUG: Force option used: Using driver vc4 (vc4_wait_bo:728) drmtest-INFO: Opened device: /d<14>[ 138.009787] [IGT] vc4_wait_bo: exiting, ret=98 ev/dri/c<8>[ 138.015547] ard0 (vc4_wait_bo:728) drmtest-DEBUG: Test requirement passed: !(fd<0) (vc4_wait_bo:728) DEBUG: Test requirement passed: igt_v<14>[ 138.033119] [IGT] vc4_wait_bo: executing c4_is_v3d(fd) (vc4_wait_bo:728) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_w<14>[ 138.047645] [IGT] vc4_wait_bo: exiting, ret=98 ait_bo:7<8>[ 138.053156] 28) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) <<<14>[ 138.072279] [IGT] vc4_wait_bo: executing 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_wait_bo:728) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_wait_bo:728) igt_vc4-CRITICAL: error: -1 != 0 (vc4_wait_bo:728) igt_core-INFO: Stack trace: (vc4_wait_bo:728) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (vc4_wait_bo:728) igt_core-INFO: #1 [igt_vc4_create_bo+0x9c] (vc4_wait_bo:728) igt_core-INFO: #2 [+0xc651149c] (vc4_wait_bo:728) igt_core-INFO: #3 [+0xc6510e2c] (vc4_wait_bo:728) igt_core-INFO: #4 [__libc_init_first+0x80] (vc4_wait_bo:728) igt_core-INFO: #5 [__libc_start_main+0x98] (vc4_wait_bo:728) igt_core-INFO: #6 [+0xc6510e70] **** END **** Subtest unused-bo-0ns: FAIL (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305836 for randomisation Opened device: /dev/dri/card0 (vc4_wait_bo:731) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_wait_bo:731) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_wait_bo:731) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_wait_bo:731) igt_vc4-CRITICAL: error: -1 != 0 Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 [igt_vc4_create_bo+0x9c] #2 [+0xba73149c] #3 [+0xba730e2c] #4 [__libc_init_first+0x80] #5 [__libc_start_main+0x98] #6 [+0xba730e70] Test vc4_wait_bo failed. **** DEBUG **** (vc4_wait_bo:731) igt_core-INFO: IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) (vc4_wait_bo:731) igt_core-INFO: Using IGT_SRANDOM=1706305836 for randomisation (vc4_wait_bo:731) drmtest-DEBUG: Force option used: Using driver vc4 (vc4_wait_bo:731) drmtest-INFO: Opened device: /dev/dri/card0 (vc4_wait_bo:731) drmtest-DEBUG: Test requirement passed: !(fd<0) (vc4_wait_bo:731) DEBUG: Test requirement passed: igt_vc4_is_v3d(fd) (vc4_wait_bo:731) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_wait_bo:731) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_wait_bo:731) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_wait_bo:731) igt_vc4-CRITICAL: error: -1 != 0 (vc4_wait_bo:731) igt_core-INFO: Stack trace: (vc4_wait_bo:731) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (vc4_wait_bo:731) igt_core-INFO: #1 [igt_vc4_create_bo+0x9c] (vc4_wait_bo:731) igt_core-INFO: #2 [+0xba73149c] (vc4_wait_bo:731) igt_core-INFO: #3 [+0xba730e2c] (vc4_wait_bo:731) igt_core-INFO: #4 [__libc_init_first+0x80] (vc4_wait_bo:731) igt_core-INFO: #5 [__libc_start_main+0x98] (vc4_wait_bo:731) igt_core-INFO: #6 [+0xba730e70] **** END **** Subtest unused-bo-1ns: FAIL (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305836 for randomisation Opened device: /dev/dri/card0 (vc4_wait_bo:734) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_wait_bo:734) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_wait_bo:734) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_wait_bo:734) igt_vc4-CRITICAL: error: -1 != 0 Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 [igt_vc4_create_bo+0x9c] #2 [+0xe3da149c] #3 [+0xe3da0e2c] #4 [__libc_init_first+0x80<14>[ 138.426015] [IGT] vc4_wait_bo: exiting, ret=98 ] #5 <8>[ 138.431680] [__libc_start_main+0x98] #6 [+0xe3da0e70] Test vc4_wait_bo failed. **** DEBUG **** (vc4_wait_bo:734) igt_core-INF<14>[ 138.449199] [IGT] vc4_wait_bo: executing O: IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) (vc4_wait_<14>[ 138.463068] [IGT] vc4_wait_bo: exiting, ret=98 bo:734) igt_core-INFO: Using IGT<8>[ 138.468782] _SRANDOM=1706305836 for randomisation (vc4_wait_bo:734) drmtest-DEBUG: Force option used: Using driver <14>[ 138.486774] [IGT] vc4_wait_bo: executing vc4 (vc4_wait_bo:734) drmtest-INFO: Opened device: /dev/dri/card0 (vc4_wait_bo:734) drmtest-DEBUG: Test requirement passed: !(fd<0) (vc4_wait_bo:734) DEBUG: Test requirement passed: igt_vc4_is_v3d(fd) (vc4_wait_bo:734) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_wait_bo:734) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_wait_bo:734) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_wait_bo:734) igt_vc4-CRITICAL: error: -1 != 0 (vc4_wait_bo:734) igt_core-INFO: Stack trace: (vc4_wait_bo:734) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (vc4_wait_bo:734) igt_core-INFO: #1 [igt_vc4_create_bo+0x9c] (vc4_wait_bo:734) igt_core-INFO: #2 [+0xe3da149c] (vc4_wait_bo:734) igt_core-INFO: #3 [+0xe3da0e2c] (vc4_wait_bo:734) igt_core-INFO: #4 [__libc_init_first+0x80] (vc4_wait_bo:734) igt_core-INFO: #5 [__libc_start_main+0x98] (vc4_wait_bo:734) igt_core-INFO: #6 [+0xe3da0e70] **** END **** Subtest used-bo-0ns: FAIL (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305836 for randomisation Opened device: /dev/dri/card0 (vc4_wait_bo:737) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_wait_bo:737) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_wait_bo:737) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_wait_bo:737) igt_vc4-CRITICAL: error: -1 != 0 Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 [igt_vc4_create_bo+0x9c] #2 [+0xb438149c] #3 [+0xb4380e2c] #4 [__libc_init_first+0x80] #5 [__libc_start_main+0x98] #6 [+0xb4380e70] Test vc4_wait_bo failed. **** DEBUG **** (vc4_wait_bo:737) igt_core-INFO: IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) (vc4_wait_bo:737) igt_core-INFO: Using IGT_SRANDOM=1706305836 for randomisation (vc4_wait_bo:737) drmtest-DEBUG: Force option used: Using driver vc4 (vc4_wait_bo:737) drmtest-INFO: Opened device: /dev/dri/card0 (vc4_wait_bo:737) drmtest-DEBUG: Test requirement passed: !(fd<0) (vc4_wait_bo:737) DEBUG: Test requirement passed: igt_vc4_is_v3d(fd) (vc4_wait_bo:737) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_wait_bo:737) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_wait_bo:737) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_wait_bo:737) igt_vc4-CRITICAL: error: -1 != 0 (vc4_wait_bo:737) igt_core-INFO: Stack trace: (vc4_wait_bo:737) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (vc4_wait_bo:737) igt_core-INFO: #1 [igt_vc4_create_bo+0x9c] (vc4_wait_bo:737) igt_core-INFO: #2 [+0xb438149c] (vc4_wait_bo:737) igt_core-INFO: #3 [+0xb4380e2c] (vc4_wait_bo:737) igt_core-INFO: #4 [__libc_init_first+0x80] (vc4_wait_bo:737) igt_core-INFO: #5 [__libc_start_main+0x98] (vc4_wait_bo:737) igt_core-INFO: #6 [+0xb4380e70] **** END **** Subtest used-bo-1ns: FAIL (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305836 for randomisation Opened device: /dev/dri/card0 (vc4_wait_bo:740) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_wait_bo:740) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) <<14>[ 138.842284] [IGT] vc4_wait_bo: exiting, ret=98 < (0+8))<8>[ 138.847807] | (((0x<8>[ 138.849371] 40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_wait_bo:740) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_wait_bo:740) igt_vc4-CRITICAL: er<8>[ 138.877374] ror: -1 != 0 Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 [igt_vc4_create_bo+0x9c] #2 [+0xb07a149c] #3 [+0xb07a0e2c] #4 [__libc_init_<14>[ 138.895589] [IGT] vc4_wait_seqno: executing first+0x<14>[ 138.895992] [IGT] vc4_wait_seqno: starting subtest bad-seqno-0ns 80] #<14>[ 138.896078] [IGT] vc4_wait_seqno: finished subtest bad-seqno-0ns, SUCCESS 5 [__lib<14>[ 138.896188] [IGT] vc4_wait_seqno: exiting, ret=0 c_start_<8>[ 138.901871] main+0x9<14>[ 138.925700] [IGT] vc4_wait_seqno: executing 8] #6<14>[ 138.939042] [IGT] vc4_wait_seqno: starting subtest bad-seqno-1ns [[ 138.939088] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 wn>+0xb0<1>[ 138.955626] Mem abort info: 7a0e70] <1>[ 138.959417] ESR = 0x96000044 Test vc<1>[ 138.963472] EC = 0x25: DABT (current EL), IL = 32 bits 4_wait_b<1>[ 138.969819] SET = 0, FnV = 0 o failed<1>[ 138.973874] EA = 0, S1PTW = 0 . **** <1>[ 138.978018] Data abort info: DEBUG **<1>[ 138.981897] ISV = 0, ISS = 0x00000044 ** (vc4<1>[ 138.986745] CM = 0, WnR = 1 _wait_bo<1>[ 138.990713] user pgtable: 4k pages, 48-bit VAs, pgdp=00000001106d1000 :740) ig<1>[ 138.998205] [0000000000000008] pgd=0000000000000000, p4d=0000000000000000 t_core-I<0>[ 139.006050] Internal error: Oops: 0000000096000044 [#1] PREEMPT SMP NFO: IGT<4>[ 139.013366] Modules linked in: hci_uart raspberrypi_cpufreq btqca btbcm bluetooth brcmfmac ecdh_generic brcmutil ecc broadcom bcm_phy_lib vc4 cfg80211 raspberrypi_hwmon iproc_rng200 cec pcie_brcmstb bcm2711_thermal pwm_bcm2835 rng_core i2c_bcm2835 rfkill crct10dif_ce clk_raspberrypi genet mdio_bcm_unimac drm_kms_helper drm dm_mod ip_tables x_tables ipv6 -Version<4>[ 139.046063] CPU: 1 PID: 749 Comm: vc4_wait_seqno Not tainted 5.10.218-cip49-rt20 #1 : 1.28-g<4>[ 139.054788] Hardware name: Raspberry Pi 4 Model B Rev 1.4 (DT) a44ebfe <4>[ 139.061664] pstate: 60000085 (nZCv daIf -PAN -UAO -TCO BTYPE=--) (aarch64<4>[ 139.068715] pc : prepare_to_wait+0x74/0x84 ) (Linux<4>[ 139.073827] lr : prepare_to_wait+0x34/0x84 : 5.10.2<4>[ 139.078940] sp : ffff80001649bbd0 18-cip49<4>[ 139.083259] x29: ffff80001649bbd0 x28: ffff80001649bd88 -rt20 aa<4>[ 139.089606] x27: ffff80001649bd88 x26: 0000000000000001 rch64) <4>[ 139.095953] x25: ffff4b71402de858 x24: ffff4b714fa0c880 (vc4_wai<4>[ 139.102300] x23: ffffb8d06d7c7000 x22: ffff80001649bc68 t_bo:740<4>[ 139.108646] x21: ffff4b71402de858 x20: 0000000000000001 ) igt_co<4>[ 139.114993] x19: ffff80001649bc50 x18: 0000000000000000 re-INFO:<4>[ 139.121341] x17: 0000000000000000 x16: ffffb8d06bcd5bc0 Using I<4>[ 139.127688] x15: 0000ffffdd17b0a0 x14: 0000000000000000 GT_SRAND<4>[ 139.134034] x13: 0000000000000000 x12: 0000000000000000 OM=17063<4>[ 139.140382] x11: 0000000000000000 x10: 0000000000000000 05836 fo<4>[ 139.146729] x9 : ffffb8d056c65000 x8 : 0000000000000001 r random<4>[ 139.153076] x7 : ffffffffffffffff x6 : ffff80001649bd98 isation <4>[ 139.159423] x5 : 0000000000052dbe x4 : 0000000000000000 (vc4_wa<4>[ 139.165770] x3 : ffff4b71402de858 x2 : 0000000000000000 it_bo:74<4>[ 139.172118] x1 : 0000000000000000 x0 : ffff4b71402de860 0) drmte<4>[ 139.178466] Call trace: st-DEBUG<4>[ 139.181905] prepare_to_wait+0x74/0x84 : Force <4>[ 139.186665] vc4_wait_for_seqno+0x98/0x174 [vc4] option u<4>[ 139.192306] vc4_wait_seqno_ioctl+0x30/0xa4 [vc4] sed: Usi<4>[ 139.198036] drm_ioctl_kernel+0xc4/0x114 [drm] ng drive<4>[ 139.203501] drm_ioctl+0x228/0x480 [drm] r vc4 (<4>[ 139.208438] __arm64_sys_ioctl+0xa8/0xf0 vc4_wait<4>[ 139.213375] el0_svc_common.constprop.0+0x78/0x1c4 _bo:740)<4>[ 139.219193] do_el0_svc+0x24/0x9c drmtest<4>[ 139.223513] el0_svc+0x14/0x20 -INFO: O<4>[ 139.227570] el0_sync_handler+0xb0/0xb4 pened de<4>[ 139.232419] el0_sync+0x180/0x1c0 vice: /d<0>[ 139.236743] Code: d50323bf d65f03c0 aa1503e0 f8408c02 (f9000456) ev/dri/c<4>[ 139.243881] ---[ end trace 45794014b028b7ee ]--- ard0 (v<6>[ 139.249657] note: vc4_wait_seqno[749] exited with preempt_count 1 c4_wait_<6>[ 139.256707] printk: console [ttyS1]: printing thread stopped bo:740) drmtest-DEBUG: Test requirement passed: !(fd<0) (vc4_wait_bo:740) DEBUG: Test requirement passed: igt_vc4_is_v3d(fd) (vc4_wait_bo:740) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_wait_bo:740) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_wait_bo:740) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_wait_bo:740) igt_vc4-CRITICAL: error: -1 != 0 (vc4_wait_bo:740) igt_core-INFO: Stack trace: (vc4_wait_bo:740) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (vc4_wait_bo:740) igt_core-INFO: #1 [igt_vc4_create_bo+0x9c] (vc4_wait_bo:740) igt_core-INFO: #2 [+0xb07a149c] (vc4_wait_bo:740) igt_core-INFO: #3 [+0xb07a0e2c] (vc4_wait_bo:740) igt_core-INFO: #4 [__libc_init_first+0x80] (vc4_wait_bo:740) igt_core-INFO: #5 [__libc_start_main+0x98] (vc4_wait_bo:740) igt_core-INFO: #6 [+0xb07a0e70] **** END **** Subtest used-bo: FAIL (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305836 for randomisation Opened device: /dev/dri/card0 Starting subtest: bad-seqno-0ns Subtest bad-seqno-0ns: SUCCESS (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.218-cip49-rt20 aarch64) Using IGT_SRANDOM=1706305836 for randomisation Opened device: /dev/dri/card0 Starting subtest: bad-seqno-1ns Segmentation fault WARNING: unhandled exit status: 139 + set +x / #