Trying 192.168.56.21... Connected to conserv1. Escape character is '^]'. ser2net port telnet,3004 device serialdev, /dev/serial/by-path/platform-fd500000.pcie-pci-0000:01:00.0-usb-0:1.2.2.2:1.0-port0, 115200n81, local=false [,115200N81] (Debian GNU/Linux) U-Boot SPL 2015.10-00061-g68849f9 (Jan 08 2016 - 17:01:43) U-Boot 2015.10-00061-g68849f9 (Jan 08 2016 - 17:01:43 +0100) CPU: Freescale i.MX6DL rev1.1 at 792 MHz Reset cause: POR Board: UDOO DualLite DRAM: 1 GiB MMC: FSL_SDHC: 0 *** Warning - bad CRC, using default environment No panel detected: default to HDMI Display: HDMI (1024x768) In: serial Out: serial Err: serial Net: using phy at 6 FEC [PRIME] Hit any key to stop autoboot: 3  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.... done BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 BOOTP broadcast 5 DHCP client bound to address 192.168.6.31 (4004 ms) => setenv serverip 192.168.56.76 setenv serverip 192.168.56.76 => tftp 0x12000000 735527/tftp-deploy-bfnxom8u/kernel/zImage tftp 0x12000000 735527/tftp-deploy-bfnxom8u/kernel/zImage Using FEC device TFTP from server 192.168.56.76; our IP address is 192.168.6.31; sending through gateway 192.168.6.1 Filename '735527/tftp-deploy-bfnxom8u/kernel/zImage'. Load address: 0x12000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################# 4.8 MiB/s done Bytes transferred = 9785856 (955200 hex) => tftp 0x13000000 735527/tftp-deploy-bfnxom8u/ramdisk/ramdisk.cpio.gz.uboot tftp 0x13000000 735527/tftp-deploy-bfnxom8u/ramdisk/ramdisk.cpio.gz.uboot Using FEC device TFTP from server 192.168.56.76; our IP address is 192.168.6.31; sending through gateway 192.168.6.1 Filename '735527/tftp-deploy-bfnxom8u/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x13000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# #######T ########################################################## ################################################################# ################################################################# ################################################################# ################################## 1.6 MiB/s done Bytes transferred = 12903571 (c4e493 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x18000000 735527/tftp-deploy-bfnxom8u/dtb/imx6dl-udoo.dtb tftp 0x18000000 735527/tftp-deploy-bfnxom8u/dtb/imx6dl-udoo.dtb Using FEC device TFTP from server 192.168.56.76; our IP address is 192.168.6.31; sending through gateway 192.168.6.1 Filename '735527/tftp-deploy-bfnxom8u/dtb/imx6dl-udoo.dtb'. Load address: 0x18000000 Loading: *### 3.4 MiB/s done Bytes transferred = 35319 (89f7 hex) => setenv bootargs 'console=ttymxc1,115200n8 root=/dev/nfs rw nfsroot=192.168.56.76:/var/lib/lava/dispatcher/tmp/735527/extract-nfsrootfs-30wzdh35,tcp,hard console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttymxc1,115200n8 root=/dev/nfs rw nfsroot=192.168.56.76:/var/lib/lava/dispatcher/tmp/735527/extract-nfsrootfs-30wzdh35,tcp,hard console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' => bootz 0x12000000 0x13000000 0x18000000 bootz 0x12000000 0x13000000 0x18000000 Kernel image @ 0x12000000 [ 0x000000 - 0x955200 ] ## Loading init Ramdisk from Legacy Image at 13000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 12903507 Bytes = 12.3 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 18000000 Booting using the fdt blob at 0x18000000 Using Device Tree in place at 18000000, end 1800b9f6 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.224-cip52-rt22 (KernelCI@build-j312025-arm-gcc-12-multi-v7-defconfig-mkjwt) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Mon Sep 16 22:28:47 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Udoo i.MX6 Dual-lite Board [ 0.000000] earlycon: ec_imx21 at MMIO 0x021e8000 (options '') [ 0.000000] printk: bootconsole [ec_imx21] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x4c000000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000010000000-0x000000003fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000040000000-0x000000004fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000010000000-0x000000004fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000004fffffff] [ 0.000000] On node 0 totalpages: 262144 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:63 [ 0.000000] HighMem zone: 65536 pages, LIFO batch:15 [ 0.000000] percpu: Embedded 16 pages/cpu s33676 r8192 d23668 u65536 [ 0.000000] pcpu-alloc: s33676 r8192 d23668 u65536 alloc=16*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260608 [ 0.000000] Kernel command line: console=ttymxc1,115200n8 root=/dev/nfs rw nfsroot=192.168.56.76:/var/lib/lava/dispatcher/tmp/735527/extract-nfsrootfs-30wzdh35,tcp,hard console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off <6>[ 0.000000] Memory: 935888K/1048576K available (14336K kernel code, 2332K rwdata, 5368K rodata, 2048K init, 417K bss, 47152K reserved, 65536K cma-reserved, 196608K highmem) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] L2C-310 erratum 769419 enabled <6>[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 <6>[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 <6>[ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines <6>[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled <6>[ 0.000000] L2C-310 cache controller enabled, 16 ways, 512 kB <6>[ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76450001 <6>[ 0.000000] Switching to timer-based delay loop, resolution 333ns <6>[ 0.000001] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns <6>[ 0.008438] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns <6>[ 0.021671] Console: colour dummy device 80x30 <6>[ 0.023577] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) <6>[ 0.033981] CPU: Testing write buffer coherency: ok <6>[ 0.039111] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.044408] pid_max: default: 32768 minimum: 301 <6>[ 0.049424] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.056866] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.065784] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 <6>[ 0.071456] Setting up static identity map for 0x10300000 - 0x103000ac <6>[ 0.078978] rcu: Hierarchical SRCU implementation. <6>[ 0.085543] EFI services will not be available. <6>[ 0.087733] smp: Bringing up secondary CPUs ... <6>[ 0.093076] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 <6>[ 0.098184] CPU1: Spectre v2: using BPIALL workaround <6>[ 0.103641] smp: Brought up 1 node, 2 CPUs <6>[ 0.107870] SMP: Total of 2 processors activated (12.00 BogoMIPS). <6>[ 0.114279] CPU: All CPU(s) started in SVC mode. <6>[ 0.119710] devtmpfs: initialized <6>[ 0.128645] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 <6>[ 0.133968] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.143880] futex hash table entries: 512 (order: 3, 32768 bytes, linear) <6>[ 0.153944] pinctrl core: initialized pinctrl subsystem <6>[ 0.158358] DMI not present or invalid. <6>[ 0.161451] NET: Registered protocol family 16 <6>[ 0.167984] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.174812] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.174989] cpuidle: using governor menu <6>[ 0.183192] CPU identified as i.MX6DL, silicon rev 1.1 <6>[ 0.327979] vdd1p1: supplied by regulator-dummy <6>[ 0.337688] vdd3p0: supplied by regulator-dummy <6>[ 0.347315] vdd2p5: supplied by regulator-dummy <6>[ 0.356987] vddarm: supplied by regulator-dummy <6>[ 0.366799] vddpu: supplied by regulator-dummy <6>[ 0.376203] vddsoc: supplied by regulator-dummy <6>[ 0.617181] No ATAGs? <6>[ 0.617316] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. <6>[ 0.625126] hw-breakpoint: maximum watchpoint size is 4 bytes. <6>[ 0.634795] imx6dl-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver <6>[ 0.644048] Serial: AMBA PL011 UART driver <6>[ 0.677220] iommu: Default domain type: Translated <6>[ 0.679797] vgaarb: loaded <5>[ 0.683312] SCSI subsystem initialized <7>[ 0.686801] libata version 3.00 loaded. <6>[ 0.690818] usbcore: registered new interface driver usbfs <6>[ 0.696393] usbcore: registered new interface driver hub <6>[ 0.701905] usbcore: registered new device driver usb <6>[ 0.708468] i2c i2c-1: IMX I2C adapter registered <6>[ 0.712741] i2c i2c-2: IMX I2C adapter registered <6>[ 0.718292] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.722317] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.731763] PTP clock support registered <6>[ 0.739656] clocksource: Switched to clocksource mxc_timer1 <6>[ 1.752153] NET: Registered protocol family 2 <6>[ 1.754152] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 1.762731] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) <6>[ 1.770256] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 1.778262] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 1.785734] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 1.792339] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 1.799107] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 1.806608] NET: Registered protocol family 1 <6>[ 1.811685] RPC: Registered named UNIX socket transport module. <6>[ 1.817173] RPC: Registered udp transport module. <6>[ 1.822165] RPC: Registered tcp transport module. <6>[ 1.827090] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 1.833812] PCI: CLS 0 bytes, default 64 <6>[ 1.838443] Trying to unpack rootfs image as initramfs... <6>[ 2.775515] Freeing initrd memory: 12604K <4>[ 2.777361] hw perfevents: no interrupt-affinity property for /pmu, guessing. <6>[ 2.784650] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available <5>[ 2.794314] Initialise system trusted keyrings <6>[ 2.797779] workingset: timestamp_bits=30 max_order=18 bucket_order=0 <6>[ 2.810050] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 2.814154] NFS: Registering the id_resolver key type <5>[ 2.818669] Key type id_resolver registered <5>[ 2.823096] Key type id_legacy registered <6>[ 2.827404] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 2.834282] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <6>[ 2.841969] ntfs: driver 2.1.32 [Flags: R/O]. <5>[ 2.847014] Key type asymmetric registered <5>[ 2.850919] Asymmetric key parser 'x509' registered <6>[ 2.856060] bounce: pool size: 64 pages <6>[ 2.860179] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) <6>[ 2.867761] io scheduler mq-deadline registered <6>[ 2.872575] io scheduler kyber registered <6>[ 2.909936] mxs-dma 110000.dma-controller: initialized <4>[ 2.914216] imx-sdma 20ec000.dma-controller: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 <6>[ 2.923180] imx-sdma 20ec000.dma-controller: external firmware not found, using ROM firmware <6>[ 2.993895] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled <6>[ 3.001812] SuperH (H)SCI(F) driver initialized <6>[ 3.004753] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 70, base_baud = 5000000) is a IMX <6>[ 3.012755] printk: console [ttymxc1] enabled <6>[ 3.017230] printk: bootconsole [ec_imx21] disabled <6>[ 3.012755] printk: console [ttymxc1] enabled <6>[ 3.017230] printk: bootconsole [ec_imx21] disabled <6>[ 3.023349] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 71, base_baud = 5000000) is a IMX <6>[ 3.024889] msm_serial: driver initialized <6>[ 3.025110] STMicroelectronics ASC driver initialized <6>[ 3.026746] STM32 USART driver initialized <6>[ 3.044116] brd: module loaded <6>[ 3.050245] loop: module loaded <6>[ 3.064310] CAN device driver interface <6>[ 3.065385] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded <6>[ 3.067761] pps pps0: new PPS source ptp0 <6>[ 3.088964] fec 2188000.ethernet eth0: registered PHC device 0 <6>[ 3.090332] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 3.090339] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 3.090400] igb: Intel(R) Gigabit Ethernet Network Driver <6>[ 3.090405] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 3.095608] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver <6>[ 3.095662] usbcore: registered new interface driver pegasus <6>[ 3.095705] usbcore: registered new interface driver asix <6>[ 3.095738] usbcore: registered new interface driver ax88179_178a <6>[ 3.095771] usbcore: registered new interface driver cdc_ether <6>[ 3.095823] usbcore: registered new interface driver smsc75xx <6>[ 3.095867] usbcore: registered new interface driver smsc95xx <6>[ 3.095906] usbcore: registered new interface driver net1080 <6>[ 3.095941] usbcore: registered new interface driver cdc_subset <6>[ 3.095970] usbcore: registered new interface driver zaurus <6>[ 3.096040] usbcore: registered new interface driver cdc_ncm <6>[ 3.099125] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>[ 3.099133] ehci-pci: EHCI PCI platform driver <6>[ 3.099170] ehci-platform: EHCI generic platform driver <6>[ 3.099419] ehci-orion: EHCI orion driver <6>[ 3.099615] SPEAr-ehci: EHCI SPEAr driver <6>[ 3.099868] ehci-st: EHCI STMicroelectronics driver <6>[ 3.100042] ehci-exynos: EHCI Exynos driver <6>[ 3.100198] ehci-atmel: EHCI Atmel driver <6>[ 3.100359] tegra-ehci: Tegra EHCI driver <6>[ 3.100539] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver <6>[ 3.100564] ohci-pci: OHCI PCI platform driver <6>[ 3.100612] ohci-platform: OHCI generic platform driver <6>[ 3.100848] SPEAr-ohci: OHCI SPEAr driver <6>[ 3.101025] ohci-st: OHCI STMicroelectronics driver <6>[ 3.101194] ohci-atmel: OHCI Atmel driver <6>[ 3.102271] usbcore: registered new interface driver usb-storage <6>[ 3.109993] i2c /dev entries driver <6>[ 3.128154] sdhci: Secure Digital Host Controller Interface driver <6>[ 3.128162] sdhci: Copyright(c) Pierre Ossman <6>[ 3.130654] Synopsys Designware Multimedia Card Interface Driver <6>[ 3.132346] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 3.133658] sdhci-esdhc-imx 2198000.mmc: Got CD GPIO <6>[ 3.136727] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 3.137921] usbcore: registered new interface driver usbhid <6>[ 3.137929] usbhid: USB HID core driver <6>[ 3.144261] NET: Registered protocol family 10 <6>[ 3.145443] Segment Routing with IPv6 <6>[ 3.145526] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 3.146094] NET: Registered protocol family 17 <6>[ 3.146113] can: controller area network core <6>[ 3.146176] NET: Registered protocol family 29 <6>[ 3.146185] can: raw protocol <6>[ 3.146193] can: broadcast manager protocol <6>[ 3.146203] can: netlink gateway - max_hops=1 <5>[ 3.146661] Key type dns_resolver registered <6>[ 3.148579] ThumbEE CPU extension supported. <5>[ 3.148598] Registering SWP/SWPB emulation handler <6>[ 3.149581] printk: console [ttymxc1]: printing thread started <5>[ 3.149719] Loading compiled-in X.509 certificates <4>[ 3.171463] imx_usb 2184000.usb: No over current polarity defined <6>[ 3.184936] mmc2: SDHCI controller on 2198000.mmc [2198000.mmc] using ADMA <4>[ 3.542031] mmc2: host does not support reading read-only switch, assuming write-enable <6>[ 3.544184] mmc2: new high speed SDXC card at address 59b4 <6>[ 3.545343] mmcblk2: mmc2:59b4 SD128 119 GiB <6>[ 3.548806] mmcblk2: p1 p2 <3>[ 3.781821] mxs_phy 20c9000.usbphy: Data# # # # #