Trying 192.168.56.33... Connected to conserv4. Escape character is '^]'. ser2net port telnet,3002 device serialdev, /dev/serial/by-path/platform-fd500000.pcie-pci-0000:01:00.0-usb-0:1.2.1.3:1.0-port0, 115200n81, local=false [,115200N81] (Debian GNU/Linux) U-Boot 2024.01 (Jan 15 2024 - 02:22:14 +0000) DRAM: 948 MiB (effective 1.9 GiB) RPI 4 Model B (0xb03115) Core: 211 devices, 16 uclasses, devicetree: board MMC: mmcnr@7e300000: 1, mmc@7e340000: 0 Loading Environment from FAT... Unable to read "uboot.env" from mmc0:1... In: serial,usbkbd Out: serial,vidconsole Err: serial,vidconsole Net: eth0: ethernet@7d580000 PCIe BRCM: link up, 5.0 Gbps x1 (SSC) starting USB... Bus xhci_pci: Register 5000420 NbrPorts 5 Starting the controller USB XHCI 1.00 scanning bus xhci_pci for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Hit any key to stop autoboot: 2  0 U-Boot> setenv autoload no setenv autoload no U-Boot> setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff U-Boot> setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff U-Boot> dhcp dhcp ethernet@7d580000 Waiting for PHY auto negotiation to complete.... done BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 BOOTP broadcast 5 DHCP client bound to address 192.168.6.6 (3798 ms) U-Boot> setenv serverip 192.168.6.2 setenv serverip 192.168.6.2 U-Boot> tftp 0x00080000 735430/tftp-deploy-fkdbt6_j/kernel/Image tftp 0x00080000 735430/tftp-deploy-fkdbt6_j/kernel/Image Using ethernet@7d580000 device TFTP from server 192.168.6.2; our IP address is 192.168.6.6 Filename '735430/tftp-deploy-fkdbt6_j/kernel/Image'. Load address: 0x80000 Loading: *################################################## 30.5 MiB 16.4 MiB/s done Bytes transferred = 31990272 (1e82200 hex) U-Boot> tftp 0x06700000 735430/tftp-deploy-fkdbt6_j/ramdisk/ramdisk.cpio.gz.uboot tftp 0x06700000 735430/tftp-deploy-fkdbt6_j/ramdisk/ramdisk.cpio.gz.uboot Using ethernet@7d580000 device TFTP from server 192.168.6.2; our IP address is 192.168.6.6 Filename '735430/tftp-deploy-fkdbt6_j/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x6700000 Loading: *############################################T ###### 55.9 MiB 6.4 MiB/s done Bytes transferred = 58591639 (37e0997 hex) U-Boot> setenv initrd_size ${filesize} setenv initrd_size ${filesize} U-Boot> tftp 0x06400000 735430/tftp-deploy-fkdbt6_j/dtb/bcm2711-rpi-4-b.dtb tftp 0x06400000 735430/tftp-deploy-fkdbt6_j/dtb/bcm2711-rpi-4-b.dtb Using ethernet@7d580000 device TFTP from server 192.168.6.2; our IP address is 192.168.6.6 Filename '735430/tftp-deploy-fkdbt6_j/dtb/bcm2711-rpi-4-b.dtb'. Load address: 0x6400000 Loading: *################################################## 25.9 KiB 3.6 MiB/s done Bytes transferred = 26538 (67aa hex) U-Boot> setenv bootargs 'console=ttyS1,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttyS1,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' U-Boot> booti 0x00080000 0x06700000 0x06400000 booti 0x00080000 0x06700000 0x06400000 Moving Image from 0x80000 to 0x200000, end=2110000 ## Loading init Ramdisk from Legacy Image at 06700000 ... Image Name: Image Type: AArch64 Linux RAMDisk Image (uncompressed) Data Size: 58591575 Bytes = 55.9 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 06400000 Booting using the fdt blob at 0x6400000 Working FDT set to 6400000 Loading Ramdisk to 36747000, end 39f27957 ... OK Loading Device Tree to 000000003673d000, end 00000000367467a9 ... OK Working FDT set to 3673d000 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083] [ 0.000000] Linux version 5.10.224-cip52-rt22 (KernelCI@build-j311991-arm64-gcc-12-defconfig-zw7zw) (aarch64-linux-gnu-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT Mon Sep 16 22:24:13 UTC 2024 [ 0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.5 [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000032400000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] earlycon: bcm2835aux0 at MMIO32 0x00000000fe215040 (options '115200n8') [ 0.000000] printk: bootconsole [bcm2835aux0] enabled [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x7fbfcb00-0x7fbfefff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff] [ 0.000000] DMA32 [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff] [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] On node 0 totalpages: 504832 [ 0.000000] DMA zone: 3792 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 242688 pages, LIFO batch:63 [ 0.000000] DMA32 zone: 4096 pages used for memmap [ 0.000000] DMA32 zone: 262144 pages, LIFO batch:63 [ 0.000000] percpu: Embedded 19 pages/cpu s40408 r8192 d29224 u77824 [ 0.000000] pcpu-alloc: s40408 r8192 d29224 u77824 alloc=19*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: EL2 vector hardening [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 0.000000] CPU features: detected: Spectre-BHB [ 0.000000] CPU features: detected: ARM erratum 1742098 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 496944 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: console=ttyS1,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) <6>[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off <6>[ 0.000000] software IO TLB: mapped [mem 0x000000002e400000-0x0000000032400000] (64MB) <6>[ 0.000000] Memory: 1758548K/2019328K available (14528K kernel code, 2888K rwdata, 7684K rodata, 6016K init, 504K bss, 195244K reserved, 65536K cma-reserved) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 <6>[ 0.000000] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. <6>[ 0.000000] Trampoline variant of Tasks RCU enabled. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 <6>[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 <6>[ 0.000000] GIC: Using split EOI/Deactivate mode <6>[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys). <6>[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns <6>[ 0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns <6>[ 0.008619] Console: colour dummy device 80x25 <6>[ 0.013472] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000) <6>[ 0.024300] pid_max: default: 32768 minimum: 301 <6>[ 0.029314] LSM: Security Framework initializing <6>[ 0.034331] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) <6>[ 0.042113] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) <6>[ 0.052191] rcu: Hierarchical SRCU implementation. <6>[ 0.059535] EFI services will not be available. <6>[ 0.064701] smp: Bringing up secondary CPUs ... <6>[ 0.070098] Detected PIPT I-cache on CPU1 <6>[ 0.074472] CPU1: Booted secondary processor 0x0000000001 [0x410fd083] <6>[ 0.081984] Detected PIPT I-cache on CPU2 <6>[ 0.086338] CPU2: Booted secondary processor 0x0000000002 [0x410fd083] <6>[ 0.093830] Detected PIPT I-cache on CPU3 <6>[ 0.098183] CPU3: Booted secondary processor 0x0000000003 [0x410fd083] <6>[ 0.105149] smp: Brought up 1 node, 4 CPUs <6>[ 0.109580] SMP: Total of 4 processors activated. <6>[ 0.114608] CPU features: detected: 32-bit EL0 Support <6>[ 0.120088] CPU features: detected: CRC32 instructions <6>[ 0.125556] CPU features: detected: 32-bit EL1 Support <6>[ 0.149877] CPU: All CPU(s) started at EL2 <6>[ 0.154335] alternatives: patching kernel code <6>[ 0.160612] devtmpfs: initialized <6>[ 0.169428] KASLR enabled <6>[ 0.172571] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns <6>[ 0.182708] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) <6>[ 0.191774] pinctrl core: initialized pinctrl subsystem <6>[ 0.198738] DMI not present or invalid. <6>[ 0.203728] NET: Registered protocol family 16 <6>[ 0.210092] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations <6>[ 0.217583] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations <6>[ 0.225830] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations <6>[ 0.234142] audit: initializing netlink subsys (disabled) <5>[ 0.240053] audit: type=2000 audit(0.164:1): state=initialized audit_enabled=0 res=1 <6>[ 0.241113] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.241120] thermal_sys: Registered thermal governor 'power_allocator' <6>[ 0.248172] cpuidle: using governor menu <6>[ 0.265771] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. <6>[ 0.273002] ASID allocator initialised with 32768 entries <6>[ 0.280310] Serial: AMBA PL011 UART driver <6>[ 0.323443] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages <6>[ 0.330518] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages <6>[ 0.337604] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 0.344650] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages <6>[ 0.353182] cryptd: max_cpu_qlen set to 1000 <6>[ 0.360560] ACPI: Interpreter disabled. <6>[ 0.366964] iommu: Default domain type: Translated <6>[ 0.372464] vgaarb: loaded <5>[ 0.375769] SCSI subsystem initialized <7>[ 0.379995] libata version 3.00 loaded. <6>[ 0.384370] usbcore: registered new interface driver usbfs <6>[ 0.390234] usbcore: registered new interface driver hub <6>[ 0.395907] usbcore: registered new device driver usb <4>[ 0.401462] usb_phy_generic phy: supply vcc not found, using dummy regulator <6>[ 0.409638] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.414932] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.424447] PTP clock support registered <6>[ 0.428866] EDAC MC: Ver: 3.0.0 <6>[ 0.433752] FPGA manager framework <6>[ 0.437549] Advanced Linux Sound Architecture Driver Initialized. <6>[ 0.444790] clocksource: Switched to clocksource arch_sys_counter <5>[ 0.451441] VFS: Disk quotas dquot_6.6.0 <6>[ 0.455738] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <6>[ 0.463190] pnp: PnP ACPI: disabled <6>[ 0.474037] NET: Registered protocol family 2 <6>[ 0.479061] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear) <6>[ 0.488478] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear) <6>[ 0.497455] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 0.505827] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear) <6>[ 0.513746] TCP: Hash tables configured (established 16384 bind 16384) <6>[ 0.520830] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear) <6>[ 0.527914] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear) <6>[ 0.535568] NET: Registered protocol family 1 <6>[ 0.540776] RPC: Registered named UNIX socket transport module. <6>[ 0.547041] RPC: Registered udp transport module. <6>[ 0.552064] RPC: Registered tcp transport module. <6>[ 0.557093] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.563880] PCI: CLS 0 bytes, default 64 <6>[ 0.568317] Unpacking initramfs... <6>[ 4.925480] Freeing initrd memory: 57216K <6>[ 4.930902] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available <6>[ 4.939593] kvm [1]: IPA Size Limit: 44 bits <6>[ 4.945725] kvm [1]: vgic interrupt IRQ9 <6>[ 4.950144] kvm [1]: Hyp mode initialized successfully <5>[ 4.957695] Initialise system trusted keyrings <6>[ 4.962642] workingset: timestamp_bits=42 max_order=19 bucket_order=0 <6>[ 4.976043] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 4.982949] NFS: Registering the id_resolver key type <5>[ 4.988381] Key type id_resolver registered <5>[ 4.992889] Key type id_legacy registered <6>[ 4.997303] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 5.004359] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <6>[ 5.012290] 9p: Installing v9fs 9p2000 file system support <5>[ 5.082136] Key type asymmetric registered <5>[ 5.086556] Asymmetric key parser 'x509' registered <6>[ 5.091788] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) <6>[ 5.099540] io scheduler mq-deadline registered <6>[ 5.104391] io scheduler kyber registered <4>[ 5.122198] EINJ: ACPI disabled. <6>[ 5.144755] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled <6>[ 5.153308] printk: console [ttyS1] disabled <6>[ 5.157982] fe215040.serial: ttyS1 at MMIO 0xfe215040 (irq = 26, base_baud = 62499999) is a 16550 <6>[ 5.167335] printk: console [ttyS1] enabled <6>[ 5.167335] printk: console [ttyS1] enabled <6>[ 5.176357] printk: bootconsole [bcm2835aux0] disabled <6>[ 5.176357] printk: bootconsole [bcm2835aux0] disabled <6>[ 5.188984] SuperH (H)SCI(F) driver initialized <6>[ 5.194439] msm_serial: driver initialized <6>[ 5.207414] loop: module loaded <6>[ 5.212029] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver <6>[ 5.220751] megasas: 07.714.04.00-rc1 <6>[ 5.230971] tun: Universal TUN/TAP device driver, 1.6 <6>[ 5.237234] thunder_xcv, ver 1.0 <6>[ 5.240827] thunder_bgx, ver 1.0 <6>[ 5.244398] nicpf, ver 1.0 <6>[ 5.248742] hclge is initializing <6>[ 5.252416] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version <6>[ 5.260018] hns3: Copyright (c) 2017 Huawei Corporation. <6>[ 5.265722] e1000: Intel(R) PRO/1000 Network Driver <6>[ 5.270946] e1000: Copyright (c) 1999-2006 Intel Corporation. <6>[ 5.277091] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 5.282400] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 5.288717] igb: Intel(R) Gigabit Ethernet Network Driver <6>[ 5.294467] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 5.300420] igbvf: Intel(R) Gigabit Virtual Function Network Driver <6>[ 5.307052] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. <6>[ 5.313696] sky2: driver version 1.30 <6>[ 5.318881] VFIO - User Level meta-driver version: 0.3 <6>[ 5.326455] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>[ 5.333368] ehci-pci: EHCI PCI platform driver <6>[ 5.338190] ehci-platform: EHCI generic platform driver <6>[ 5.343909] ehci-orion: EHCI orion driver <6>[ 5.348361] ehci-exynos: EHCI Exynos driver <6>[ 5.352979] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver <6>[ 5.359538] ohci-pci: OHCI PCI platform driver <6>[ 5.364350] ohci-platform: OHCI generic platform driver <6>[ 5.370044] ohci-exynos: OHCI Exynos driver <6>[ 5.375201] usbcore: registered new interface driver usb-storage <6>[ 5.384640] i2c /dev entries driver <6>[ 5.390734] brcmstb-i2c fef04500.i2c: @97500hz registered in polling mode <6>[ 5.398344] brcmstb-i2c fef09500.i2c: @97500hz registered in polling mode <6>[ 5.409229] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer <6>[ 5.418067] sdhci: Secure Digital Host Controller Interface driver <6>[ 5.424632] sdhci: Copyright(c) Pierre Ossman <6>[ 5.429930] Synopsys Designware Multimedia Card Interface Driver <6>[ 5.437418] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 5.445682] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 5.453959] usbcore: registered new interface driver usbhid <6>[ 5.459902] usbhid: USB HID core driver <6>[ 5.465199] bcm2835-mbox fe00b880.mailbox: mailbox enabled <6>[ 5.475667] NET: Registered protocol family 17 <6>[ 5.480651] 9pnet: Installing 9P2000 support <5>[ 5.485324] Key type dns_resolver registered <6>[ 5.490354] printk: console [ttyS1]: printing thread started <6>[ 5.490430] registered taskstats version 1 <5>[ 5.490442] Loading compiled-in X.509 certificates <6>[ 5.495188] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 24, base_baud = 0) is a PL011 rev2 <6>[ 5.495379] serial serial0: tty port ttyAMA0 registered <6>[ 5.510830] raspberrypi-firmware soc:firmware: Attached to firmware from 2023-10-17T15:39:16 <4>[ 5.517163] dwc2 fe980000.usb: supply vusb_d not found, using dummy regulator <4>[ 5.517316] dwc2 fe980000.usb: supply vusb_a not found, using dummy regulator <6>[ 5.619205] dwc2 fe980000.usb: EPs: 8, dedicated fifos, 4080 entries in SPRAM <6>[ 5.624909] sdhci-iproc fe300000.mmc: allocated mmc-pwrseq <6>[ 5.657591] mmc0: SDHCI controller on fe300000.mmc [fe300000.mmc] using PIO <6>[ 5.670164] mmc1: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA <4>[ 5.673429] mmc0: queuing unknown CIS tuple 0x80 (2 bytes) <4>[ 5.675120] mmc0: queuing unknown CIS tuple 0x80 (3 bytes) <4>[ 5.676814] mmc0: queuing unknown CIS tuple 0x80 (3 bytes) <4>[ 5.679848] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) <4>[ 5.681535] mmc0: queuing unknown CIS tuple 0x80 (3 bytes) <6>[ 5.742823] mmc0: new high speed SDIO card at address 0001 <6>[ 5.767002] mmc1: new ultra high speed DDR50 SDXC card at address 59b4 <6>[ 5.767654] mmcblk1: mmc1:59b4 GE4S5 239 GiB <6>[ 5.769592] mmcblk1: p1 p2 <6>[ 17.964823] clk: Disabling unused clocks <6>[ 17.964917] ALSA device list: <6>[ 17.964925] No soundcards found. <6>[ 17.970829] Freeing unused kernel memory: 6016K <6>[ 17.971094] Run /init as init process <30>[ 18.002904] systemd[1]: System time before build time, advancing clock. <6>[ 18.017153] NET: Registered protocol family 10 <6>[ 18.018182] Segment Routing with IPv6 <30>[ 18.032221] systemd[1]: systemd 252.22-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) Welcome <30>[ 18.032254] systemd[1]: Detected architecture arm64. to [1mDebian GNU/Linux 12 (bookworm)[0m! <30>[ 18.085083] systemd[1]: Hostname set to . <30>[ 18.364507] systemd[1]: Queued start job for default target graphical.target. <30>[ 18.370639] systemd[1]: Created slice system-getty.slice - Slice /system/getty. [[0;32m OK [0m] Created slice [0;1;39msystem-getty.slice[0m - Slice /system/getty. [[0;32m OK [0m] Created slic<30>[ 18.398555] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. e [0;1;39msystem-modpr…lice[0m - Slice /system/modprobe. [[0;32m OK [0m] Crea<30>[ 18.426713] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty. ted slice [0;1;39msystem-seria…[0m - Slice /system/serial-getty. [[0;32m OK [0m] Created slic<30>[ 18.454119] systemd[1]: Created slice user.slice - User and Session Slice. e [0;1;39muser.slice[0m - User and Session Slice. [[0;32m OK [0m] Started [0;1;39msys<30>[ 18.477286] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch. temd-ask-passwo…quests to Console Directory Watch. [[0;32m OK [0m] Started [0;1;39msystemd-ask<30>[ 18.505159] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. -passwo… Requests to Wall Directory Watch. Expecting device [0;1;39mdev-ttyS1.dev<30>[ 18.533011] systemd[1]: proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point was skipped because of an unmet condition check (ConditionPathExists=/proc/sys/fs/binfmt_misc). ice[0m <30>[ 18.533116] systemd[1]: Expecting device dev-ttyS1.device - /dev/ttyS1... - /dev/ttyS1... [[0;32m OK [0m] Reached target [0;1;39mcryp<30>[ 18.576966] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes. tsetup.…get[0m - Local Encrypted Volumes. [[0;32m OK [0m] Reached target [0;1;39minte<30>[ 18.604987] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. grityse…Local Integrity Protected Volumes. [[0;32m OK [0m] Reached target [0;1;39mpath<30>[ 18.632988] systemd[1]: Reached target paths.target - Path Units. s.target[0m - Path Units. [[0;32m OK [0m] Reached target [0;1;39mremo<30>[ 18.656958] systemd[1]: Reached target remote-fs.target - Remote File Systems. te-fs.target[0m - Remote File Systems. [[0;32m OK [0m] Reached target [0;1;39mslic<30>[ 18.680937] systemd[1]: Reached target slices.target - Slice Units. es.target[0m - Slice Units. [[0;32m OK [0m] Reached target [0;1;39mswap<30>[ 18.704976] systemd[1]: Reached target swap.target - Swaps. .target[0m - Swaps. [[0;32m OK [0m] Reached target [0;1;39mveri<30>[ 18.725002] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. tysetup… - Local Verity Protected Volumes. [[0;32m OK [0m] Listening on [0;1;3<30>[ 18.753239] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. 9msystemd-initc… initctl Compatibility Named Pipe. [[0;32m OK [0m] Listening on<30>[ 18.782007] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket. [0;1;39msystemd-journ…socket[0m - Journal Audit Socket. [[0;32m OK [0m] Listening on [0;1;3<30>[ 18.809512] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). 9msystemd-journ…t[0m - Journal Socket (/dev/log). [[0;32m OK [0m] Listening on [0;1;3<30>[ 18.837513] systemd[1]: Listening on systemd-journald.socket - Journal Socket. 9msystemd-journald.socket[0m - Journal Socket. [[0;32m OK [0m] Listening on [0;1;3<30>[ 18.865649] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. 9msystemd-udevd….socket[0m - udev Control Socket. [[0;32m OK [0m] Listening on [0;1;3<30>[ 18.893408] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. 9msystemd-udevd…l.socket[0m - udev Kernel Socket. Mounting [0;1;39mdev-hugepages.mount[<30>[ 18.925006] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... 0m - Huge Pages File System... Mounting [0;1;39mdev-mqueue.mount…P<30>[ 18.952913] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... OSIX Message Queue File System... Mounting [0;1;39msys-kernel-debug.…<30>[ 18.981088] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... [0m - Kernel Debug File System... <30>[ 19.005415] systemd[1]: sys-kernel-tracing.mount - Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing). <30>[ 19.010032] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... Starting [0;1;39mkmod-static-nodes…ate List of Static Device Nodes... Starting [0;1;39mmodprobe@conf<30>[ 19.057829] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... igfs…m - Load Kernel Module configfs... Starting [0;1;39mmodprobe@dm_m<30>[ 19.089504] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... od.s…[0m - Load Kernel Module dm_mod..<6>[ 19.104309] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com . Starting [0;1;39mmodprobe@drm.<30>[ 19.129587] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... service[0m - Load Kernel Module drm... Starting [0;1;39mmodprobe@efi_<30>[ 19.157800] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... psto…- Load Kernel Module efi_pstore... Starting [0;1;39mmodprobe@loop<30>[ 19.189588] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... .ser…e[0m - Load Kernel Module loop... <28>[ 19.217694] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. <28>[ 19.217717] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) <30>[ 19.221349] systemd[1]: Starting systemd-journald.service - Journal Service... Starting [0;1;39msystemd-journald.service[0m - Journal Service... Starting [0;1;39msyste<30>[ 19.274119] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... md-modules-l…rvice[0m - Load Kernel Modules... Starting [0;1;39msystemd-netwo<30>[ 19.305660] systemd[1]: Starting systemd-network-generator.service - Generate network units from Kernel command line... rk-g… units from Kernel command line... Starting [0;1;39msystemd-remou<30>[ 19.337229] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... nt-f…nt Root and Kernel File Systems... Starting [0;1;39msystemd-udev-<30>[ 19.369536] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... trig…[0m - Coldplug All udev Devices... [[0;32m<30>[ 19.404261] systemd[1]: Started systemd-journald.service - Journal Service. OK [0m] Started [0;1;39msystemd-journald.service[0m - Journal Service. [[0;32m OK [0m] Mounted [0;1;39mdev-hugepages.mount[0m - Huge Pages File System. [[0;32m OK [0m] Mounted [0;1;39mdev-mqueue.mount[…- POSIX Message Queue File System. [[0;32m OK [0m] Mounted [0;1;39msys-kernel-debug.m…nt[0m - Kernel Debug File System. [[0;32m OK [0m] Finished [0;1;39mkmod-static-nodes…reate List of Static Device Nodes. [[0;32m OK [0m] Finished [0;1;39mmodprobe@configfs…[0m - Load Kernel Module configfs. [[0;32m OK [0m] Finished [0;1;39mmodprobe@dm_mod.s…e[0m - Load Kernel Module dm_mod. [[0;32m OK [0m] Finished [0;1;39mmodprobe@drm.service[0m - Load Kernel Module drm. [[0;32m OK [0m] Finished [0;1;39mmodprobe@efi_psto…m - Load Kernel Module efi_pstore. [[0;32m OK [0m] Finished [0;1;39mmodprobe@loop.service[0m - Load Kernel Module loop. [[0;32m OK [0m] Finished [0;1;39msystemd-modules-l…service[0m - Load Kernel Modules. [[0;32m OK [0m] Finished [0;1;39msystemd-network-g…rk units from Kernel command line. [[0;1;31mFAILED[0m] Failed to start [0;1;39msystemd-re…ount Root and Kernel File Systems. See 'systemctl status systemd-remount-fs.service' for details. [[0;32m OK [0m] Reached target [0;1;39mnetwork-pre…get[0m - Preparation for Network. Mounting [0;1;39msys-kernel-config…ernel Configuration File System... Starting [0;1;39msystemd-journal-f…h Journal to Persistent Storage... <46>[ 19.775081] systemd-journald[123]: Received client request to flush runtime journal. Starting [0;1;39msystemd-random-se…ice[0m - Load/Save Random Seed... Starting [0;1;39msystemd-sysctl.se…ce[0m - Apply Kernel Variables... Starting [0;1;39msystemd-sysusers.…rvice[0m - Create System Users... [[0;32m OK [0m] Mounted [0;1;39msys-kernel-config.… Kernel Configuration File System. [[0;32m OK [0m] Finished [0;1;39msystemd-journal-f…ush Journal to Persistent Storage. [[0;32m OK [0m] Finished [0;1;39msystemd-sysctl.service[0m - Apply Kernel Variables. [[0;32m OK [0m] Finished [0;1;39msystemd-sysusers.service[0m - Create System Users. Starting [0;1;39msystemd-tmpfiles-…ate Static Device Nodes in /dev... [[0;32m OK [0m] Finished [0;1;39msystemd-tmpfiles-…reate Static Device Nodes in /dev. [[0;32m OK [0m] Reached target [0;1;39mlocal-fs-pr…reparation for Local File Systems. [[0;32m OK [0m] Reached target [0;1;39mlocal-fs.target[0m - Local File Systems. Starting [0;1;39msystemd-tmpfiles-… Volatile Files and Directories... Starting [0;1;39msystemd-udevd.ser…ger for Device Events and Files... [[0;32m OK [0m] Finished [0;1;39msystemd-udev-trig…e[0m - Coldplug All udev Devices. [[0;32m OK [0m] Finished [0;1;39msystemd-tmpfiles-…te Volatile Files and Directories. Starting [0;1;39msystemd-timesyncd… - Network Time Synchronization... Starting [0;1;39msystemd-update-ut…rd System Boot/Shutdown in UTMP... [[0;32m OK [0m] Finished [0;1;39msystemd-update-ut…cord System Boot/Shutdown in UTMP. [[0;32m OK [0m] Started [0;1;39msystemd-udevd.serv…nager for Device Events and Files. [[0;32m OK [0m] Started [0;1;39msystemd-timesyncd.…0m - Network Time Synchronization. [[0;32m OK [0m] Found device [0;1;39mdev-ttyS1.device[0m - /dev/ttyS1. [[0;32m OK [0m] Reached target [0;1;39msysinit.target[0m - System Initialization. [[0;32m OK [0m] Started [0;1;39msystemd-tmpfiles-c… Cleanup of Temporary Directories. [[0;32m OK [0m] Reached target [0;1;39mtime-set.target[0m - System Time Set. [[0;32m OK [0m] Started [0;1;39mfstrim.timer[0m - Discard unused blocks once a week. [[0;32m OK [0m] Reached target [0;1;39mtimers.target[0m - Timer Units. [[0;32m OK [0m] Listening on [0;1;39mdbus.socket[…- D-Bus System Message Bus Socket. [[0;32m OK [0m] Reached target [0;1;39msockets.target[0m - Socket Units. [[0;32m OK [0m] Reached target [0;1;39mbasic.target[0m - Basic System. Starting [0;1;39mdbus.service[0m - D-Bus System Message Bus... <5>[ 20.782822] random: dbus-daemon: uninitialized urandom read (12 bytes read) <5>[ 20.791373] random: dbus-daemon: uninitialized urandom read (12 bytes read) Starting [0;1;39msystemd-logind.se…ice[0m - User Login Management... Starting [0;1;39msystemd-user-sess…vice[0m - Permit User Sessions... [[0;32m OK [0m] Started [0;1;39mdbus.service[0m - D-Bus System Message Bus. [[0;32m OK [0m] Finished [0;1;39msystemd-user-sess…ervice[0m - Permit User Sessions. [[0;32m OK [0m] Started [0;1;39mgetty@tty1.service[0m - Getty on tty1. [[0;32m OK [0m] Started [0;1;39mserial-getty@ttyS1…rvice[0m - Serial Getty on ttyS1. [[0;32m OK [0m] Reached target [0;1;39mgetty.target[0m - Login Prompts. [[0;32m OK [0m] Started [0;1;39msystemd-logind.service[0m - User Login Management. [[0;32m OK [0m] Reached target [0;1;39mmulti-user.target[0m - Multi-User System. <6>[ 21.075898] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 [[0;32m OK [0m] Reached target [0;1;39mgraphical.target[0m - Graphical Interface. Starting [0;1;39msystemd-update-ut… Record Runlevel Change in UTMP... <6>[ 21.140764] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: <6>[ 21.140815] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff] <6>[ 21.140854] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x0603ffffff -> 0x00f8000000 [[0;32m<6>[ 21.140888] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x007fffffff -> 0x0400000000 OK [<6>[ 21.141097] iproc-rng200 fe104000.rng: hwrng registered 0m] Fini<6>[ 21.165130] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus shed [0;1;39msystemd-update-ut�<6>[ 21.219161] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC) �� - Rec<6>[ 21.219476] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 ord Runlevel Change in U<6>[ 21.219488] pci_bus 0000:00: root bus resource [bus 00-ff] TMP. <6>[ 21.219502] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff]) <6>[ 21.219547] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 <6>[ 21.219633] pci 0000:00:00.0: PME# supported from D0 D3hot [[0;32m OK [0m] Reached target [0;1;39musb-<6>[ 21.223339] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 gadget.�<6>[ 21.223413] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] ��m - Ha<6>[ 21.223602] pci 0000:01:00.0: PME# supported from D0 D3hot rdware a<6>[ 21.234964] pci 0000:00:00.0: BAR 14: assigned [mem 0x600000000-0x6000fffff] ctivated<6>[ 21.234994] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit] USB gadget. <6>[ 21.235017] pci 0000:00:00.0: PCI bridge to [bus 01] <6>[ 21.235027] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] <6>[ 21.235322] pcieport 0000:00:00.0: enabling device (0000 -> 0002) <6>[ 21.235957] pcieport 0000:00:00.0: PME: Signaling with IRQ 51 <3>[ 21.252459] [drm:vc5_hdmi_init_resources [vc4]] *ERROR* Failed to get HDMI state machine clock <5>[ 21.256979] cfg80211: Loading compiled-in X.509 certificates for regulatory database <3>[ 21.260431] [drm:vc5_hdmi_init_resources [vc4]] *ERROR* Failed to get HDMI state machine clock <6>[ 21.288960] xhci_hcd 0000:01:00.0: xHCI Host Controller <6>[ 21.289006] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 <6>[ 21.289456] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000040000000890 <6>[ 21.290366] xhci_hcd 0000:01:00.0: xHCI Host Controller <6>[ 21.290381] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 <6>[ 21.290395] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed <6>[ 21.291096] hub 1-0:1.0: USB hub found <6>[ 21.291134] hub 1-0:1.0: 1 port detected <3>[ 21.294076] [drm:vc5_hdmi_init_resources [vc4]] *ERROR* Failed to get HDMI state machine clock <3>[ 21.306257] [drm:vc5_hdmi_init_resources [vc4]] *ERROR* Failed to get HDMI state machine clock <6>[ 21.307448] hub 2-0:1.0: USB hub found <6>[ 21.307522] hub 2-0:1.0: 4 ports detected <3>[ 21.310712] [drm:vc5_hdmi_init_resources [vc4]] *ERROR* Failed to get HDMI state machine clock <5>[ 21.312378] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' <5>[ 21.313376] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' <4>[ 21.313557] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 <4>[ 21.313573] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db [[0;32m OK [0m] List<6>[ 21.315114] Bluetooth: Core ver 2.22 ening on<6>[ 21.315233] NET: Registered protocol family 31 [0;1;3<6>[ 21.315241] Bluetooth: HCI device and connection manager initialized 9msystemd-rfkil�<6>[ 21.315265] Bluetooth: HCI socket layer initialized ��l Switch Statu<6>[ 21.315275] Bluetooth: L2CAP socket layer initialized s /dev/r<6>[ 21.315300] Bluetooth: SCO socket layer initialized fkill Wa<3>[ 21.315443] [drm:vc5_hdmi_init_resources [vc4]] *ERROR* Failed to get HDMI state machine clock tch. <6>[ 21.359926] Bluetooth: HCI UART driver ver 2.3 <6>[ 21.359947] Bluetooth: HCI UART protocol H4 registered <6>[ 21.360029] Bluetooth: HCI UART protocol LL registered <6>[ 21.360336] Bluetooth: HCI UART protocol Broadcom registered <6>[ 21.360391] Bluetooth: HCI UART protocol QCA registered <3>[ 21.362147] debugfs: Directory 'fef00700.hdmi' with parent 'vc4-hdmi-0' already present! <4>[ 21.363113] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator <4>[ 21.366198] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator [[0;32m OK [0m] Reac<6>[ 21.367884] vc4-drm gpu: bound fef00700.hdmi (ops vc4_hdmi_ops [vc4]) hed targ<3>[ 21.368371] debugfs: Directory 'fef05700.hdmi' with parent 'vc4-hdmi-1' already present! et [0;1<6>[ 21.370519] vc4-drm gpu: bound fef05700.hdmi (ops vc4_hdmi_ops [vc4]) ;39msoun<6>[ 21.370727] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) d.target<6>[ 21.370919] vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops [vc4]) [0m - S<6>[ 21.371072] vc4-drm gpu: bound fe206000.pixelvalve (ops vc4_crtc_ops [vc4]) ound Car<6>[ 21.371223] vc4-drm gpu: bound fe207000.pixelvalve (ops vc4_crtc_ops [vc4]) d. <6>[ 21.371363] vc4-drm gpu: bound fe20a000.pixelvalve (ops vc4_crtc_ops [vc4]) <6>[ 21.371485] vc4-drm gpu: bound fe216000.pixelvalve (ops vc4_crtc_ops [vc4]) <6>[ 21.392578] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 0 <6>[ 21.394457] vc4-drm gpu: [drm] Cannot find any crtc or sizes <6>[ 21.404324] vc4-drm gpu: [drm] Cannot find any crtc or sizes <6>[ 21.485060] uart-pl011 fe201000.serial: no DMA platform data <6>[ 21.486589] bcmgenet fd580000.ethernet end0: renamed from eth0 [[0;32m<6>[ 21.508587] cfg80211: failed to load regulatory.db OK [<6>[ 21.546630] usb 1-1: new high-speed USB device number 2 using xhci_hcd 0m] Reac<6>[ 21.560129] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 hed targ<4>[ 21.560262] brcmfmac mmc0:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.bin failed with error -2 et [0;1<4>[ 21.560276] brcmfmac mmc0:0001:1: Falling back to sysfs fallback for: brcm/brcmfmac43455-sdio.bin ;39mbluetooth.target[0m - Bluetooth Support. <6>[ 21.736952] hub 1-1:1.0: USB hub found <6>[ 21.737255] hub 1-1:1.0: 4 ports detected <6>[ 21.742368] Bluetooth: hci0: BCM: chip id 107 <6>[ 21.742612] Bluetooth: hci0: BCM: features 0x2f Startin<6>[ 21.744089] Bluetooth: hci0: BCM4345C0 g [0;1;<6>[ 21.744092] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000 39msyste<3>[ 21.745146] Bluetooth: hci0: BCM: firmware Patch file not found, tried: md-rfkil<3>[ 21.745153] Bluetooth: hci0: BCM: 'brcm/BCM4345C0.hcd' l.se…L<3>[ 21.745155] Bluetooth: hci0: BCM: 'brcm/BCM.hcd' oad/Save RF Kill Switch Status... [[0;32m OK [0m] Started [0;1;39msystemd-rfkill.ser…- Load/Save RF Kill Switch Status. <5>[ 22.080790] random: crng init done [[0;32m OK [0m] Finished [0;1;39msystemd-random-se…rvice[0m - Load/Save Random Seed. Debian GNU/Linux 12 debian-bookworm-arm64 ttyS1 debian-bookworm-arm64 login: root (automatic login) Linux debian-bookworm-arm64 5.10.224-cip52-rt22 #1 SMP PREEMPT Mon Sep 16 22:24:13 UTC 2024 aarch64 The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-735430/environment . /lava-735430/environment / # /lava-735430/bin/lava-test-runner /lava-735430/0 /lava-735430/bin/lava-test-runner /lava-735430/0<3>[ 22.631088] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50 + export TESTRUN_ID=0_igt-<8>[ 22.692226] kms-vc4 + cd /lava-735430/0/tests/0_igt-kms-vc4 + cat uuid + UUID=735430_1.5.2.4.1 + set +x + IGT_FORCE_DRIVER=vc4 /usr/bin/igt-parser.sh core_auth core_ge<8>[ 22.710786] tclient core_getstats core_getversion core_setmaster_vs_auth drm_read kms_addfb_basic kms_atomic kms_flip_event_leak kms<14>[ 22.725214] [IGT] core_auth: executing _prop_bl<14>[ 22.725455] [IGT] core_auth: starting subtest getclient-simple ob kms_s<14>[ 22.725631] [IGT] core_auth: finished subtest getclient-simple, SUCCESS etmode k<14>[ 22.725717] [IGT] core_auth: exiting, ret=0 ms_vblan<8>[ 22.730029] k vc4_cr<14>[ 22.748255] [IGT] core_auth: executing eate_bo vc4_dmabuf_poll vc4_labe<14>[ 22.766523] [IGT] core_auth: starting subtest getclient-master-drop l_bo vc4<14>[ 22.766757] [IGT] core_auth: finished subtest getclient-master-drop, SUCCESS _lookup_<14>[ 22.766852] [IGT] core_auth: exiting, ret=0 fail vc4<8>[ 22.771284] _mmap vc<14>[ 22.789461] [IGT] core_auth: executing 4_prefmon vc4_purgeable_bo vc4_t<14>[ 22.803043] [IGT] core_auth: starting subtest basic-auth iling vc<14>[ 22.803208] [IGT] core_auth: finished subtest basic-auth, SUCCESS 4_wait_b<14>[ 22.803262] [IGT] core_auth: exiting, ret=0 o vc4_wa<8>[ 22.807644] it_seqno<14>[ 22.823941] [IGT] core_auth: executing IGT-Ve<14>[ 22.836521] [IGT] core_auth: starting subtest many-magics rsion: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305720 for randomisation Sta<14>[ 22.851234] [IGT] core_auth: finished subtest many-magics, SUCCESS rting su<14>[ 22.851327] [IGT] core_auth: exiting, ret=0 btest: g<8>[ 22.855705] etclient<8>[ 22.856919] -simple Opened device: /dev/dri/card0 [1mSubtest getclient-simple: SUCCESS (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64)<14>[ 22.885173] [IGT] core_getclient: executing (Linux:<14>[ 22.885516] [IGT] core_getclient: exiting, ret=0 5.10.22<8>[ 22.889758] 4-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305720 for randomisation Starting subtest: getclient-master-drop Opened device: /dev/dri/card0 [1mSubtest getcl<14>[ 22.918998] [IGT] core_getstats: executing ient-mas<14>[ 22.919333] [IGT] core_getstats: exiting, ret=0 ter-drop<8>[ 22.923742] : SUCCESS (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305720 for randomisation Opened device: /dev/dri/card0 Starting subte<14>[ 22.954412] [IGT] core_getversion: executing st: basi<14>[ 22.954772] [IGT] core_getversion: exiting, ret=0 c-auth <8>[ 22.959681] [1mSubtest basic-auth: SUCCESS (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305720 for randomisation Opened device: /dev/dri/card0 Starting subtest: many-magics Reopening device failed a<14>[ 22.993035] [IGT] core_setmaster_vs_auth: executing fter 102<14>[ 22.993560] [IGT] core_setmaster_vs_auth: exiting, ret=0 0 opens <8>[ 22.998631] [1mSub<8>[ 23.015710] test many-magics: SUCCESS (0.015s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64<14>[ 23.030085] [IGT] drm_read: executing ) Using IGT_SRANDOM=1706305720 for randomisation Opened device: /dev/dri/card0 SUCCES<6>[ 23.042920] vc4-drm gpu: [drm] Cannot find any crtc or sizes S (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305720 for randomisation Opened device: /dev/dri/card0 SUCCESS (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305720 for randomisation Opened device: /dev/dri/card0 SUCCESS (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305720 for randomisation Opened device: /dev/dri/card0 SUCCESS (0.000s) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305721 for randomisation Opened device: /dev/dri/card0 Starting subtest: invali<14>[ 23.181032] [IGT] drm_read: starting subtest invalid-buffer d-buffer<14>[ 23.181153] [IGT] drm_read: finished subtest invalid-buffer, SUCCESS [1mSu<14>[ 23.181331] [IGT] drm_read: exiting, ret=0 btest in<8>[ 23.187489] valid-buffer: SUCCESS (0.000s)[0m IGT-<14>[ 23.209950] [IGT] drm_read: executing Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305721 for randomisation Opened device: /dev/dri/card0 Starting subtest: fault-<14>[ 23.350347] [IGT] drm_read: starting subtest fault-buffer buffer <14>[ 23.350586] [IGT] drm_read: finished subtest fault-buffer, SUCCESS [1mSubt<14>[ 23.350726] [IGT] drm_read: exiting, ret=0 est faul<8>[ 23.356595] t-buffer: SUCCESS (0.000s)[0m <14>[ 23.379349] [IGT] drm_read: executing IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305721 for randomisation Opened device: /dev/dri/card0 Starting subtest: empty-block <14>[ 23.517174] [IGT] drm_read: starting subtest empty-block [1mSubtest empty-block: SUCCESS (1.000s<14>[ 24.517462] [IGT] drm_read: finished subtest empty-block, SUCCESS )[0m <14>[ 24.520461] [IGT] drm_read: exiting, ret=0 <8>[ 24.524890] IGT-Version: 1.28-ga44ebfe (aarch64) (Li<14>[ 24.541547] [IGT] drm_read: executing nux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305722 for randomisation Opened device: /dev/dri/card0 Starting subtest: empty-<14>[ 24.679185] [IGT] drm_read: starting subtest empty-nonblock nonblock<14>[ 24.679311] [IGT] drm_read: finished subtest empty-nonblock, SUCCESS [1mSu<14>[ 24.679456] [IGT] drm_read: exiting, ret=0 btest em<8>[ 24.685053] pty-nonblock: SU<14>[ 24.708103] [IGT] drm_read: executing CCESS (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305722 for randomisation Opened device: /dev/dri/card0 Starting<14>[ 24.848446] [IGT] drm_read: starting subtest short-buffer-block subtest<14>[ 24.848582] [IGT] drm_read: finished subtest short-buffer-block, SUCCESS : short-<14>[ 24.848730] [IGT] drm_read: exiting, ret=0 buffer-b<8>[ 24.868119] lock [1mSubtest short-buffer-block: SUCCESS (0.000s)[0m IGT-Version: 1.2<14>[ 24.883657] [IGT] drm_read: executing 8-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305722 for randomisation Opened device: /dev/dri/card0 Starting subtest: short-<14>[ 25.022385] [IGT] drm_read: starting subtest short-buffer-nonblock buffer-n<14>[ 25.022515] [IGT] drm_read: finished subtest short-buffer-nonblock, SUCCESS onblock <14>[ 25.022648] [IGT] drm_read: exiting, ret=0 [1mSub<8>[ 25.028571] test short-buffer-nonblock: SUCCESS (0.000s)[0m<14>[ 25.053144] [IGT] drm_read: executing IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305723 for randomisation Opened device: /dev/dri/card0 Starting subtest: short-buffer-wakeup <14>[ 25.193241] [IGT] drm_read: starting subtest short-buffer-wakeup [1mSubtest shor<14>[ 57.407703] [IGT] drm_read: finished subtest short-buffer-wakeup, SUCCESS t-buffer<14>[ 57.407881] [IGT] drm_read: exiting, ret=0 -wakeup:<8>[ 57.413245] SUCCESS<8>[ 57.415210] (32.214s)[0m <8>[ 57.437338] IGT-Version: 1.28-ga44ebfe (aarc<14>[ 57.454128] [IGT] kms_addfb_basic: executing h64) (Li<14>[ 57.458715] [IGT] kms_addfb_basic: starting subtest unused-handle nux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRA<14>[ 57.469094] [IGT] kms_addfb_basic: finished subtest unused-handle, SUCCESS NDOM=1706305755 for randomisation Opened device: /dev/dri/card0 Starting subtest: unused-handle [1mSubtest unused-handle: SUCCESS (0.000s)[0m Test requirement not met in function igt_req<14>[ 57.494553] [IGT] kms_addfb_basic: exiting, ret=0 uire_int<8>[ 57.498968] el, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requ<14>[ 57.513984] [IGT] kms_addfb_basic: executing <14>[ 57.517569] [IGT] kms_addfb_basic: starting subtest unused-pitches irement not met in function igt_require_intel, f<14>[ 57.528840] [IGT] kms_addfb_basic: finished subtest unused-pitches, SUCCESS ile ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT<14>[ 57.554580] [IGT] kms_addfb_basic: exiting, ret=0 -Version<8>[ 57.558908] : 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDO<14>[ 57.574071] [IGT] kms_addfb_basic: executing <14>[ 57.577664] [IGT] kms_addfb_basic: starting subtest unused-offsets M=1706305755 for randomisation Opened device: /<14>[ 57.588813] [IGT] kms_addfb_basic: finished subtest unused-offsets, SUCCESS dev/dri/card0 Starting subtest: unused-pitches [1mSubtest unused-pitches: SUCCESS (0.000s)[0m Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requ<14>[ 57.614396] [IGT] kms_addfb_basic: exiting, ret=0 irement:<8>[ 57.618704] is_intel_device(fd) Test requirement not met in function igt_require_intel, fi<14>[ 57.634030] [IGT] kms_addfb_basic: executing <14>[ 57.637625] [IGT] kms_addfb_basic: starting subtest unused-modifier le ../lib/drmtest.c:880: Test requirement: is_i<14>[ 57.648862] [IGT] kms_addfb_basic: finished subtest unused-modifier, SUCCESS ntel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.22<14>[ 57.674706] [IGT] kms_addfb_basic: exiting, ret=0 4-cip52-<8>[ 57.679024] rt22 aarch64) Using IGT_SRANDOM=1706305755 for randomisation Opened de<14>[ 57.694278] [IGT] kms_addfb_basic: executing <14>[ 57.697873] [IGT] kms_addfb_basic: starting subtest clobberred-modifier vice: /d<14>[ 57.708719] [IGT] kms_addfb_basic: finished subtest clobberred-modifier, SKIP ev/dri/card0 Starting subtest: unused-offsets [1mSubtest unused-offsets: SUCCESS (0.000s)[0m Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Te<14>[ 57.731488] [IGT] kms_addfb_basic: exiting, ret=77 st requi<8>[ 57.735897] rement: is_intel_device(fd) Test requirement not met in function igt_re<14>[ 57.749738] [IGT] kms_addfb_basic: executing quire_in<14>[ 57.753092] [IGT] kms_addfb_basic: starting subtest invalid-smem-bo-on-discrete tel, file ../lib/drmtest.c:880: <14>[ 57.766279] [IGT] kms_addfb_basic: finished subtest invalid-smem-bo-on-discrete, SKIP Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga4<14>[ 57.791473] [IGT] kms_addfb_basic: exiting, ret=77 4ebfe (a<8>[ 57.796098] arch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305755 for randomisation Opened dev<14>[ 57.814033] [IGT] kms_addfb_basic: executing <14>[ 57.817422] [IGT] kms_addfb_basic: starting subtest legacy-format ice: /dev/dri/card0 Starting subtest: unused-modifier [1mSubtest unused-modifier: SUCCESS (0.000s)[0m Test requirement not met in function <14>[ 57.838851] [IGT] kms_addfb_basic: finished subtest legacy-format, SUCCESS igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test r<14>[ 57.862102] [IGT] kms_addfb_basic: exiting, ret=0 equireme<8>[ 57.867210] nt: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(f<14>[ 57.888306] [IGT] kms_addfb_basic: executing d) IGT-<14>[ 57.893401] [IGT] kms_addfb_basic: starting subtest no-handle Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.22<14>[ 57.900955] [IGT] kms_addfb_basic: finished subtest no-handle, SUCCESS 4-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305755 for randomisation Opened device: /dev/dri/card0 Starting subtest: clobberred-modifier Test requirement not met in function igt_require_i9<14>[ 57.926629] [IGT] kms_addfb_basic: exiting, ret=0 15, file<8>[ 57.930944] ../lib/drmtest.c:885: Test requirement: is_i915_device(fd) [1mSubtest clobberred-mod<14>[ 57.946225] [IGT] kms_addfb_basic: executing ifier: S<14>[ 57.951408] [IGT] kms_addfb_basic: starting subtest basic KIP (0.0<14>[ 57.960717] [IGT] kms_addfb_basic: finished subtest basic, SUCCESS 00s)[0m Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_in<14>[ 57.982577] [IGT] kms_addfb_basic: exiting, ret=0 tel, fil<8>[ 57.987081] e ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt<14>[ 58.001672] [IGT] kms_addfb_basic: executing <14>[ 58.006805] [IGT] kms_addfb_basic: starting subtest bad-pitch-0 _require<14>[ 58.016678] [IGT] kms_addfb_basic: finished subtest bad-pitch-0, SUCCESS _intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305755 for randomisa<14>[ 58.038460] [IGT] kms_addfb_basic: exiting, ret=0 tion Op<8>[ 58.042720] ened dev<46>[ 58.043005] systemd-journald[123]: Data hash table of /var/log/journal/c3f909ee3e324895ab90ff2613af9260/system.journal has a fill level at 75.0 (1536 of 2047 items, 524288 file size, 341 bytes per hash table item), suggesting rotation. ice: /de<46>[ 58.043016] systemd-journald[123]: /var/log/journal/c3f909ee3e324895ab90ff2613af9260/system.journal: Journal header limits reached or header out-of-date, rotating. v/dri/ca<14>[ 58.076492] [IGT] kms_addfb_basic: executing rd0 Starting subtest: invalid-smem-bo-on-discrete Test requirement not met in function<14>[ 58.102011] [IGT] kms_addfb_basic: starting subtest bad-pitch-32 igt_req<14>[ 58.102080] [IGT] kms_addfb_basic: finished subtest bad-pitch-32, SUCCESS uire_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) [1mSubtest invalid-smem-bo-on-discrete: SKIP (0.000s)[0m Test requirement not met in function igt_require_intel, file <14>[ 58.133996] [IGT] kms_addfb_basic: exiting, ret=0 ../lib/d<8>[ 58.138355] rmtest.c:880: Test requirement:<14>[ 58.152376] [IGT] kms_addfb_basic: executing is_inte<14>[ 58.157051] [IGT] kms_addfb_basic: starting subtest bad-pitch-63 l_device(fd) Test requirement not met in functi<14>[ 58.164983] [IGT] kms_addfb_basic: finished subtest bad-pitch-63, SUCCESS on igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requir<14>[ 58.190712] [IGT] kms_addfb_basic: exiting, ret=0 ement: i<8>[ 58.195477] s_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305755 for randomis<14>[ 58.213723] [IGT] kms_addfb_basic: executing ation O<14>[ 58.218567] [IGT] kms_addfb_basic: starting subtest bad-pitch-128 pened device: /dev/dri/card0 Starting subtest: <14>[ 58.229388] [IGT] kms_addfb_basic: finished subtest bad-pitch-128, SUCCESS legacy-format Successfully fuzzed 10000 {bpp, depth} variations [1mSubtest legacy-format: SUCCESS (0.011s)[0m Test requirement not met in function igt_require_intel, file ../lib/d<14>[ 58.254810] [IGT] kms_addfb_basic: exiting, ret=0 rmtest.c<8>[ 58.259154] :880: Test requirement: is_intel_device(fd) Test requirement not met in functi<14>[ 58.274227] [IGT] kms_addfb_basic: executing on igt_r<14>[ 58.279413] [IGT] kms_addfb_basic: starting subtest bad-pitch-256 equire_intel, file ../lib/drmtest.c:880: Test r<14>[ 58.289099] [IGT] kms_addfb_basic: finished subtest bad-pitch-256, SUCCESS equirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305755 for randomisation Opened device: /dev/dri/card0 Starting subtest: no-handle [1mSubtest no-handle: SUCCESS (0.000s)[0m Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305755 for randomisation Opened device: /dev/dri/card0 Starting subtest: basic [1mSubtest basic: SUCCESS (0.000s)[0m Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305755 for randomisation Opened device: /dev/dri/card0 Starting subtest: bad-pitch-0 [1mSubtest bad-pitch-0: SUCCESS (0.000s)[0m Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305756 for randomisation Opened device: /dev/dri/card0 Starting subtest: bad-pitch-32 [1mSubtest bad-pitch-32: SUCCESS (0.000s)[0m Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305756 for randomisation Opened device: /dev/dri/card0 Starting subtest: bad-pitch-63 [1mSubtest bad-pitch-63: SUCCESS (0.000s)[0m Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305756 for randomisation Opened device: /dev/dri/card0 Starting subtest: bad-pitch-128 [1mSubtest bad-pitch-128: SUCCESS (0.000s)[0m Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305756 for randomisation Opened device: /dev/dri/card0 Starting subtest: bad-pitch-256 [1mSubtest bad-pitch-256: SUCCESS (0.000s)[0m Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880:<14>[ 58.657702] [IGT] kms_addfb_basic: exiting, ret=0 Test r<8>[ 58.663302] equirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function<14>[ 58.686159] [IGT] kms_addfb_basic: executing igt_req<14>[ 58.691359] [IGT] kms_addfb_basic: starting subtest bad-pitch-1024 uire_intel, file ../lib/drmtest.c:880: Test req<14>[ 58.701398] [IGT] kms_addfb_basic: finished subtest bad-pitch-1024, SUCCESS uirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305756 for randomisation Opened device: /dev/dri/card0 <14>[ 58.727427] [IGT] kms_addfb_basic: exiting, ret=0 Startin<8>[ 58.731664] g subtest: bad-pitch-1024 [1mSubtest bad-pitch-1024: SUCCESS (0.000s)[0m Tes<14>[ 58.747188] [IGT] kms_addfb_basic: executing t requir<14>[ 58.752315] [IGT] kms_addfb_basic: starting subtest bad-pitch-999 ement not met in function igt_require_intel, fil<14>[ 58.761247] [IGT] kms_addfb_basic: finished subtest bad-pitch-999, SUCCESS e ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test <14>[ 58.787302] [IGT] kms_addfb_basic: exiting, ret=0 requirem<8>[ 58.791562] ent not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requ<14>[ 58.806917] [IGT] kms_addfb_basic: executing irement:<14>[ 58.811985] [IGT] kms_addfb_basic: starting subtest bad-pitch-65536 is_intel_device(fd) IGT-Version: 1.28-<14>[ 58.821758] [IGT] kms_addfb_basic: finished subtest bad-pitch-65536, SUCCESS ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305756 for randomisation Opened device: /dev/dri/card0 Starting subtest: bad-pitch-999 [1mSubtest bad<14>[ 58.847189] [IGT] kms_addfb_basic: exiting, ret=0 -pitch-9<8>[ 58.851440] 99: SUCCESS (0.000s)[0m Test requirement not met in function igt_require_intel<14>[ 58.866910] [IGT] kms_addfb_basic: executing , file .<14>[ 58.873437] [IGT] kms_addfb_basic: starting subtest invalid-get-prop-any ./lib/drmtest.c:880: Test requirement: <14>[ 58.881733] [IGT] kms_addfb_basic: finished subtest invalid-get-prop-any, SUCCESS is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest<14>[ 58.899369] [IGT] kms_addfb_basic: exiting, ret=0 .c:880: <8>[ 58.903757] Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmt<14>[ 58.921059] [IGT] kms_addfb_basic: executing est.c:88<14>[ 58.927751] [IGT] kms_addfb_basic: starting subtest invalid-get-prop 0: Test requirement: is_intel_device(fd) IGT-V<14>[ 58.937232] [IGT] kms_addfb_basic: finished subtest invalid-get-prop, SUCCESS ersion: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=17063057<14>[ 58.954850] [IGT] kms_addfb_basic: exiting, ret=0 56 for r<8>[ 58.959252] andomisation Opened device: /dev/dri/card0 Starting subtest: bad-pitch<14>[ 58.974635] [IGT] kms_addfb_basic: executing -65536 <14>[ 58.981205] [IGT] kms_addfb_basic: starting subtest invalid-set-prop-any [1mSubtest bad-pitch-65536: SUCCESS (0.<14>[ 58.989606] [IGT] kms_addfb_basic: finished subtest invalid-set-prop-any, SUCCESS 000s)[0m Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: T<14>[ 59.007250] [IGT] kms_addfb_basic: exiting, ret=0 est requ<8>[ 59.011670] irement: is_intel_device(fd) Test requirement not met in function igt_r<14>[ 59.028547] [IGT] kms_addfb_basic: executing equire_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) <14>[ 59.040068] [IGT] kms_addfb_basic: starting subtest invalid-set-prop Test re<14>[ 59.040145] [IGT] kms_addfb_basic: finished subtest invalid-set-prop, SUCCESS quirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aar<14>[ 59.070597] [IGT] kms_addfb_basic: exiting, ret=0 ch64) U<8>[ 59.075382] sing IGT_SRANDOM=1706305756 for randomisation Opened device: /dev/dri/card0 Starting subtest: invalid-get-prop-any [1mSubtes<14>[ 59.094405] [IGT] kms_addfb_basic: executing t invalid-get-prop-any: SUCCESS (0.000s)<14>[ 59.102419] [IGT] kms_addfb_basic: starting subtest master-rmfb [0m Te<14>[ 59.102601] [IGT] kms_addfb_basic: finished subtest master-rmfb, SUCCESS st requirement not met i<14>[ 59.119465] [IGT] kms_addfb_basic: exiting, ret=0 n functi<8>[ 59.123927] on igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_dev<14>[ 59.138881] [IGT] kms_addfb_basic: executing ice(fd) Test requirement not met in fun<14>[ 59.148580] [IGT] kms_addfb_basic: starting subtest addfb25-modifier-no-flag ction ig<14>[ 59.148683] [IGT] kms_addfb_basic: finished subtest addfb25-modifier-no-flag, SUCCESS t_require_intel, file ..<14>[ 59.166126] [IGT] kms_addfb_basic: exiting, ret=0 /lib/drm<8>[ 59.170738] test.c:880: Test requirement: is_intel_<14>[ 59.184256] [IGT] kms_addfb_basic: executing device(fd) Test requirement not<14>[ 59.192684] [IGT] kms_addfb_basic: starting subtest addfb25-bad-modifier met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305756 for randomisation Opened device: /dev/dri/card0 Starting subtest: invalid-get-prop [1mSubtest invalid-get-prop: SUCCESS (0.000s)[0m Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305756 for randomisation Opened device: /dev/dri/card0 Starting subtest: invalid-set-prop-any [1mSubtest invalid-set-prop-any: SUCCESS (0.000s)[0m Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305757 for randomisation Opened device: /dev/dri/card0 Starting subtest: invalid-set-prop [1mSubtest invalid-set-prop: SUCCESS (0.000s)[0m Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305757 for randomisation Opened device: /dev/dri/card0 Starting subtest: master-rmfb [1mSubtest master-rmfb: SUCCESS (0.000s)[0m Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305757 for randomisation Opened device: /dev/dri/card0 Starting subtest: addfb25-modifier-no-flag [1mSubtest addfb25-modifier-no-flag: SUCCESS (0.000s)[0m Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305757 for randomisation Opened device: /dev/dri/card0 Starting subtest: addfb25-bad-modifier (kms_addfb_basic:359) CRITICAL: Test assertion failure function addfb25_tests, file ../tests/kms_addfb_basic.c:714: (kms_addfb_basic:359) CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0xB8)) << 0) | ((((sizeof(struct drm_mode_fb_cmd2)))) << ((0+8)+8)))), (&f)) == -1 (kms_addfb_basic:359) CRITICAL: error: 0 != -1 Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 [+0xb3854358] #2 [+0xb3855fbc] #3 [+0xb385156c] #4 [__libc_init_first+0x80] #5 [__libc_start_main+0x98] #6 [[ 59.547226] [IGT] kms_addfb_basic: finished subtest addfb25-bad-modifier, FAIL own>+0xb38515b0] Subtest addfb25-bad-modifier failed. **** DEBUG **** (kms_addfb_basic:359) ioctl_wrappers-DEBUG: Test requirement passed: igt_has_fb_modifiers(fd) (kms_addfb_basic<14>[ 59.569423] [IGT] kms_addfb_basic: exiting, ret=98 :359) CR<8>[ 59.574432] ITICAL: Test assertion failure function addfb25_tests, file ../tests/kms<14>[ 59.591137] [IGT] kms_addfb_basic: executing _addfb_basic.c:714: (kms_addfb_basic:359) CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0xB8)) << 0) | ((((sizeof(struct drm_mode_fb_cmd2)))) << ((0+8)+8)))), (&f)) == -<14>[ 59.615753] [IGT] kms_addfb_basic: exiting, ret=77 1 (kms_<8>[ 59.620328] addfb_basic:359) CRITICAL: error: 0 != -1 (kms_addfb_ba<14>[ 59.634786] [IGT] kms_addfb_basic: executing sic:359) igt_core-INFO: Stack trace: (kms_addfb_basic:359) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_addfb_basic:359) igt_core-INFO: #1 [+0xb3854358] (kms_addfb_basic:359) igt_core-INF<14>[ 59.659261] [IGT] kms_addfb_basic: exiting, ret=77 O: #2 <8>[ 59.663871] [+0xb3855fbc] (kms_addfb_basic:359) igt_core-INFO: #3 [+0xb385156c] (kms_addfb_basic:359) <14>[ 59.681691] [IGT] kms_addfb_basic: executing igt_core-INFO: #4 [__libc_init_first+0x80] (kms_addfb_basic:359) igt_core-INFO: #5 [__libc_start_main+0x98] (kms_addfb_basic:359) igt_core-INFO: #6 [+0xb38515b0] **** END **** [1mSubtest addfb25<14>[ 59.706177] [IGT] kms_addfb_basic: exiting, ret=77 -bad-mod<8>[ 59.710841] ifier: FAIL (0.354s)[0m Test requirement not met in function i<14>[ 59.728490] [IGT] kms_addfb_basic: executing gt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is<14>[ 59.758066] [IGT] kms_addfb_basic: exiting, ret=77 _intel_d<8>[ 59.762488] evice(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224<14>[ 59.777748] [IGT] kms_addfb_basic: executing -cip52-rt22 aarch64) Using IGT_SRANDOM=1706305757 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_devi<14>[ 59.802661] [IGT] kms_addfb_basic: exiting, ret=77 ce(fd) <8>[ 59.807312] [1mSubtest addfb25-x-tiled-mismatch-legacy: SKIP (0.000s)[0m Test req<14>[ 59.821639] [IGT] kms_addfb_basic: executing uirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_inte<14>[ 59.846125] [IGT] kms_addfb_basic: exiting, ret=77 l_device<8>[ 59.850714] (fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305757 for random<14>[ 59.868842] [IGT] kms_addfb_basic: executing isation Opened device: /dev/dri/card0 Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) [1mSubtest addfb25-x-tiled-legacy: SKIP (0.000s)[0m<14>[ 59.893394] [IGT] kms_addfb_basic: exiting, ret=77 Test r<8>[ 59.897950] equirement not met in function igt_require_intel, file ../lib/drmtest.c:<14>[ 59.914848] [IGT] kms_addfb_basic: executing 880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.1<14>[ 59.939160] [IGT] kms_addfb_basic: starting subtest size-max 0.224-ci<14>[ 59.939267] [IGT] kms_addfb_basic: finished subtest size-max, SUCCESS p52-rt22<14>[ 59.939404] [IGT] kms_addfb_basic: exiting, ret=0 aarch64<8>[ 59.943923] ) Using IGT_SRA<14>[ 59.968062] [IGT] kms_addfb_basic: executing NDOM=1706305757 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) [1mSubtest addfb25-framebu<14>[ 59.992493] [IGT] kms_addfb_basic: starting subtest too-wide ffer-vs-<14>[ 59.992591] [IGT] kms_addfb_basic: finished subtest too-wide, SUCCESS set-tili<14>[ 59.992733] [IGT] kms_addfb_basic: exiting, ret=0 ng: SKIP<8>[ 60.003996] (0.000s)[0m Test requirement not met in function igt_<14>[ 60.021840] [IGT] kms_addfb_basic: executing require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(<14>[ 60.046889] [IGT] kms_addfb_basic: starting subtest too-high fd) IGT<14>[ 60.047007] [IGT] kms_addfb_basic: finished subtest too-high, SUCCESS -Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305757 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) [1mSubtest basic-x-tiled-legacy: SKIP (0.000s)[0m Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305757 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) [1mSubtest framebuffer-vs-set-tiling: SKIP (0.000s)[0m Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305757 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) [1mSubtest tile-pitch-mismatch: SKIP (0.000s)[0m Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305757 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) [1mSubtest basic-y-tiled-legacy: SKIP (0.000s)[0m Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305757 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Starting subtest: size-max [1mSubtest size-max: SUCCESS (0.000s)[0m Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305757 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Starting subtest: too-wide [1mSubtest too-wide: SUCCESS (0.000s)[0m Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305758 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test req<14>[ 60.398042] [IGT] kms_addfb_basic: exiting, ret=0 uirement<8>[ 60.403898] : is_intel_device(fd) Starting subtest: too-high [1mSubtest too-high: SUCCESS<14>[ 60.419916] [IGT] kms_addfb_basic: executing (0.000s)[0m Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_S<14>[ 60.444291] [IGT] kms_addfb_basic: starting subtest bo-too-small RANDOM=1<14>[ 60.444387] [IGT] kms_addfb_basic: finished subtest bo-too-small, SUCCESS 70630575<14>[ 60.444520] [IGT] kms_addfb_basic: exiting, ret=0 8 for ra<8>[ 60.449081] <14>[ 60.465724] [IGT] kms_addfb_basic: executing ndomisation Opened device: /dev/dri/card0 Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Starti<14>[ 60.501941] [IGT] kms_addfb_basic: starting subtest small-bo ng subte<14>[ 60.502044] [IGT] kms_addfb_basic: finished subtest small-bo, SUCCESS st: bo-t<14>[ 60.502176] [IGT] kms_addfb_basic: exiting, ret=0 oo-small<8>[ 60.506773] [1mSu<14>[ 60.523753] [IGT] kms_addfb_basic: executing btest bo-too-small: SUCCESS (0.000s)[0m Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305758 for randomi<14>[ 60.559388] [IGT] kms_addfb_basic: starting subtest bo-too-small-due-to-tiling sation <14>[ 60.559482] [IGT] kms_addfb_basic: finished subtest bo-too-small-due-to-tiling, SKIP Opened d<14>[ 60.559606] [IGT] kms_addfb_basic: exiting, ret=77 <8>[ 60.563970] <14>[ 60.577769] [IGT] kms_addfb_basic: executing evice: /dev/dri/card0 Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Starting su<14>[ 60.619684] [IGT] kms_addfb_basic: exiting, ret=77 btest: s<8>[ 60.624047] mall-bo [1mSubtest small-bo: SUCCESS (0.000s)[0m Test requirement no<14>[ 60.638703] [IGT] kms_addfb_basic: executing t met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305758 for rand<14>[ 60.663817] [IGT] kms_addfb_basic: exiting, ret=77 omisatio<8>[ 60.668432] n Opened device: /dev/dri/card0 Test requirement not met in function i<14>[ 60.684062] [IGT] kms_addfb_basic: executing gt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Starting<14>[ 60.708031] [IGT] kms_addfb_basic: exiting, ret=77 subtest<8>[ 60.712604] : bo-too-small-due-to-tiling Test requirement not met in functi<14>[ 60.727045] [IGT] kms_addfb_basic: executing on igt_require_i915, file ../lib/drmtest.c:885: Test requirement: is_i915_device(fd) [1mSubtest bo-too-small-due-to-tiling: SKIP (0.000s)[0m Test requirement not met in function igt_require_intel, file ../lib/dr<14>[ 60.751619] [IGT] kms_addfb_basic: exiting, ret=77 mtest.c:<8>[ 60.756191] 880: Te<8>[ 60.757593] st requirement: is_intel_device(fd) IGT-Version: 1.28-ga44ebfe (aarch64<8>[ 60.776383] ) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305758 for randomisation Opened device: /dev/dri/card0 Test requ<14>[ 60.792728] [IGT] kms_atomic: executing irement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_requi<14>[ 60.810689] [IGT] kms_atomic: starting subtest plane-overlay-legacy re_intel<14>[ 60.811037] [IGT] kms_atomic: starting dynamic subtest pipe-A-Writeback-1 , file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) [1mSubtest addfb25-y-tiled-legacy: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305758 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) [1mSubtest addfb25-yf-tiled-legacy: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305758 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) [1mSubtest addfb25-y-tiled-small-legacy: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305758 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) Test requirement not met in function igt_require_intel, file ../lib/drmtest.c:880: Test requirement: is_intel_device(fd) [1mSubtest addfb25-4-tiled: SKIP (0.000s)[0m IGT<14>[ 60.999831] [IGT] kms_atomic: finished subtest pipe-A-Writeback-1, SUCCESS -Version<14>[ 60.999900] [IGT] kms_atomic: finished subtest plane-overlay-legacy, SUCCESS : 1.28-g<14>[ 61.000034] [IGT] kms_atomic: exiting, ret=0 a44ebfe <8>[ 61.005420] (aarch64) (Linux: 5.10.2<14>[ 61.030913] [IGT] kms_atomic: executing 24-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305758 for randomisation Opened device: /<14>[ 61.043662] [IGT] kms_atomic: starting subtest plane-primary-legacy dev/dri/<14>[ 61.044013] [IGT] kms_atomic: starting dynamic subtest pipe-A-Writeback-1 card0 Starting subtest: plane-overlay-legacy Starting dynamic subtest: pipe-A-Writeback-1 [1mDynamic subtest pipe-A-Writeback-1: SUCCESS (0.189s)[0m [1mSubtest plane-overlay-legacy: SUCCESS (0.189s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305759 for randomisation Opened device: /dev/dri/card0 Starting subtest: plane-primary-legacy Starting dynamic subtest: pipe-A-Writeback-1 (kms_atomic:419) igt_kms-CRITICA<3>[ 61.174565] [drm:vc4_bo_create [vc4]] *ERROR* Failed to allocate from CMA: L: Test <6>[ 61.174615] vc4-drm gpu: [drm] dumb: 34560kb BOs (1) assertion failure function kmstest_dumb_create, file ../lib/igt_kms.c:1295: (kms_atomic:419) igt_kms-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0xB2)) << 0) | ((((sizeof(struct drm_mode_create_dumb)))) << ((0+8)+8)))), (&create)) == 0 (kms_atomic:419) igt_kms-CRITICAL: Last errno: 12, Cannot allocate memory (kms_atomic:419) igt_kms-CRITICAL: error: -1 != 0 Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:1297 kmstest_dumb_create() #2 ../lib/igt_fb.c:1249 create_bo_for_fb.isra.0() #3 ../lib/igt_fb.c:2112 igt_create_fb_with_bo_size() #4 ../lib/igt_fb.c:2155 igt_create_fb() #5 ../lib/igt_fb.c:2268 igt_create_color_pattern_fb() #6 [+0xe4515cd0] #7 [+0xe45124b8] #8 [__libc_init_first+0x80] #9 [__libc_start_main+0x98] #10 [+0xe45124f0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** (kms_atomic:419) igt_kms-DEBUG: plane A.11: Setting property "CRTC_H" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.11: Setting property "FB_ID" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.11: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.11: Setting property "rotation" to 0x1/1 (kms_atomic:419) igt_kms-DEBUG: plane A.11: Setting property "alpha" to 0xffff/65535 (kms_atomic:419) igt_kms-DEBUG: display: populating plane data: A.12, fb 0 (kms_atomic:419) igt_kms-DEBUG: plane A.12: Setting property "SRC_X" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.12: Setting property "SRC_Y" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.12: Setting property "SRC_W" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.12: Setting property "SRC_H" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.12: Setting property "CRTC_X" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.12: Setting property "CRTC_Y" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.12: Setting property "CRTC_W" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.12: Setting property "CRTC_H" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.12: Setting property "FB_ID" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.12: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.12: Setting property "rotation" to 0x1/1 (kms_atomic:419) igt_kms-DEBUG: plane A.12: Setting property "alpha" to 0xffff/65535 (kms_atomic:419) igt_kms-DEBUG: display: populating plane data: A.13, fb 0 (kms_atomic:419) igt_kms-DEBUG: plane A.13: Setting property "SRC_X" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.13: Setting property "SRC_Y" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.13: Setting property "SRC_W" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.13: Setting property "SRC_H" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.13: Setting property "CRTC_X" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.13: Setting property "CRTC_Y" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.13: Setting property "CRTC_W" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.13: Setting property "CRTC_H" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.13: Setting property "FB_ID" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.13: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.13: Setting property "rotation" to 0x1/1 (kms_atomic:419) igt_kms-DEBUG: plane A.13: Setting property "alpha" to 0xffff/65535 (kms_atomic:419) igt_kms-DEBUG: display: populating plane data: A.14, fb 0 (kms_atomic:419) igt_kms-DEBUG: plane A.14: Setting property "SRC_X" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.14: Setting property "SRC_Y" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.14: Setting property "SRC_W" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.14: Setting property "SRC_H" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.14: Setting property "CRTC_X" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.14: Setting property "CRTC_Y" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.14: Setting property "CRTC_W" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.14: Setting property "CRTC_H" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.14: Setting property "FB_ID" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.14: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.14: Setting property "rotation" to 0x1/1 (kms_atomic:419) igt_kms-DEBUG: plane A.14: Setting property "alpha" to 0xffff/65535 (kms_atomic:419) igt_kms-DEBUG: display: populating plane data: A.15, fb 0 (kms_atomic:419) igt_kms-DEBUG: plane A.15: Setting property "SRC_X" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.15: Setting property "SRC_Y" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.15: Setting property "SRC_W" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.15: Setting property "SRC_H" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.15: Setting property "CRTC_X" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.15: Setting property "CRTC_Y" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.15: Setting property "CRTC_W" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.15: Setting property "CRTC_H" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.15: Setting property "FB_ID" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.15: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.15: Setting property "rotation" to 0x1/1 (kms_atomic:419) igt_kms-DEBUG: plane A.15: Setting property "alpha" to 0xffff/65535 (kms_atomic:419) igt_kms-DEBUG: display: populating plane data: A.16, fb 0 (kms_atomic:419) igt_kms-DEBUG: plane A.16: Setting property "SRC_X" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.16: Setting property "SRC_Y" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.16: Setting property "SRC_W" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.16: Setting property "SRC_H" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.16: Setting property "CRTC_X" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.16: Setting property "CRTC_Y" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.16: Setting property "CRTC_W" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.16: Setting property "CRTC_H" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.16: Setting property "FB_ID" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.16: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.16: Setting property "rotation" to 0x1/1 (kms_atomic:419) igt_kms-DEBUG: plane A.16: Setting property "alpha" to 0xffff/65535 (kms_atomic:419) igt_kms-DEBUG: display: populating plane data: A.17, fb 0 (kms_atomic:419) igt_kms-DEBUG: plane A.17: Setting property "SRC_X" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.17: Setting property "SRC_Y" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.17: Setting property "SRC_W" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.17: Setting property "SRC_H" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.17: Setting property "CRTC_X" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.17: Setting property "CRTC_Y" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.17: Setting property "CRTC_W" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.17: Setting property "CRTC_H" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.17: Setting property "FB_ID" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.17: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane A.17: Setting property "rotation" to 0x1/1 (kms_atomic:419) igt_kms-DEBUG: plane A.17: Setting property "alpha" to 0xffff/65535 (kms_atomic:419) igt_kms-DEBUG: Pipe B: Setting property "MODE_ID" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: Pipe B: Setting property "ACTIVE" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: display: populating plane data: B.0, fb 0 (kms_atomic:419) igt_kms-DEBUG: plane B.0: Setting property "SRC_X" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane B.0: Setting property "SRC_Y" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane B.0: Setting property "SRC_W" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane B.0: Setting property "SRC_H" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane B.0: Setting property "CRTC_X" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane B.0: Setting property "CRTC_Y" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane B.0: Setting property "CRTC_W" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane B.0: Setting property "CRTC_H" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane B.0: Setting property "FB_ID" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane B.0: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane B.0: Setting property "rotation" to 0x1/1 (kms_atomic:419) igt_kms-DEBUG: plane B.0: Setting property "alpha" to 0xffff/65535 (kms_atomic:419) igt_kms-DEBUG: display: populating plane data: B.17, fb 0 (kms_atomic:419) igt_kms-DEBUG: plane B.17: Setting property "SRC_X" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane B.17: Setting property "SRC_Y" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane B.17: Setting property "SRC_W" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane B.17: Setting property "SRC_H" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane B.17: Setting property "CRTC_X" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane B.17: Setting property "CRTC_Y" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane B.17: Setting property "CRTC_W" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane B.17: Setting property "CRTC_H" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane B.17: Setting property "FB_ID" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane B.17: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane B.17: Setting property "rotation" to 0x1/1 (kms_atomic:419) igt_kms-DEBUG: plane B.17: Setting property "alpha" to 0xffff/65535 (kms_atomic:419) igt_kms-DEBUG: Pipe C: Setting property "MODE_ID" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: Pipe C: Setting property "ACTIVE" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: display: populating plane data: C.0, fb 0 (kms_atomic:419) igt_kms-DEBUG: plane C.0: Setting property "SRC_X" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane C.0: Setting property "SRC_Y" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane C.0: Setting property "SRC_W" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane C.0: Setting property "SRC_H" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane C.0: Setting property "CRTC_X" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane C.0: Setting property "CRTC_Y" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane C.0: Setting property "CRTC_W" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane C.0: Setting property "CRTC_H" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane C.0: Setting property "FB_ID" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane C.0: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane C.0: Setting property "rotation" to 0x1/1 (kms_atomic:419) igt_kms-DEBUG: plane C.0: Setting property "alpha" to 0xffff/65535 (kms_atomic:419) igt_kms-DEBUG: display: populating plane data: C.17, fb 0 (kms_atomic:419) igt_kms-DEBUG: plane C.17: Setting property "SRC_X" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane C.17: Setting property "SRC_Y" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane C.17: Setting property "SRC_W" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane C.17: Setting property "SRC_H" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane C.17: Setting property "CRTC_X" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane C.17: Setting property "CRTC_Y" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane C.17: Setting property "CRTC_W" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane C.17: Setting property "CRTC_H" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane C.17: Setting property "FB_ID" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane C.17: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane C.17: Setting property "rotation" to 0x1/1 (kms_atomic:419) igt_kms-DEBUG: plane C.17: Setting property "alpha" to 0xffff/65535 (kms_atomic:419) igt_kms-DEBUG: Pipe D: Setting property "MODE_ID" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: Pipe D: Setting property "ACTIVE" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: display: populating plane data: D.0, fb 0 (kms_atomic:419) igt_kms-DEBUG: plane D.0: Setting property "SRC_X" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane D.0: Setting property "SRC_Y" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane D.0: Setting property "SRC_W" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane D.0: Setting property "SRC_H" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane D.0: Setting property "CRTC_X" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane D.0: Setting property "CRTC_Y" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane D.0: Setting property "CRTC_W" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane D.0: Setting property "CRTC_H" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane D.0: Setting property "FB_ID" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane D.0: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane D.0: Setting property "rotation" to 0x1/1 (kms_atomic:419) igt_kms-DEBUG: plane D.0: Setting property "alpha" to 0xffff/65535 (kms_atomic:419) igt_kms-DEBUG: display: populating plane data: D.17, fb 0 (kms_atomic:419) igt_kms-DEBUG: plane D.17: Setting property "SRC_X" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane D.17: Setting property "SRC_Y" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane D.17: Setting property "SRC_W" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane D.17: Setting property "SRC_H" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane D.17: Setting property "CRTC_X" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane D.17: Setting property "CRTC_Y" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane D.17: Setting property "CRTC_W" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane D.17: Setting property "CRTC_H" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane D.17: Setting property "FB_ID" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane D.17: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane D.17: Setting property "rotation" to 0x1/1 (kms_atomic:419) igt_kms-DEBUG: plane D.17: Setting property "alpha" to 0xffff/65535 (kms_atomic:419) igt_kms-DEBUG: Pipe E: Setting property "MODE_ID" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: Pipe E: Setting property "ACTIVE" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: display: populating plane data: E.0, fb 0 (kms_atomic:419) igt_kms-DEBUG: plane E.0: Setting property "SRC_X" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane E.0: Setting property "SRC_Y" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane E.0: Setting property "SRC_W" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane E.0: Setting property "SRC_H" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane E.0: Setting property "CRTC_X" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane E.0: Setting property "CRTC_Y" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane E.0: Setting property "CRTC_W" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane E.0: Setting property "CRTC_H" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane E.0: Setting property "FB_ID" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane E.0: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane E.0: Setting property "rotation" to 0x1/1 (kms_atomic:419) igt_kms-DEBUG: plane E.0: Setting property "alpha" to 0<14>[ 62.554296] [IGT] kms_atomic: finished subtest pipe-A-Writeback-1, FAIL xffff/65<14>[ 62.554436] [IGT] kms_atomic: finished subtest plane-primary-legacy, FAIL 535 (km<14>[ 62.556147] [IGT] kms_atomic: exiting, ret=98 s_atomic<8>[ 62.563067] :419) igt_kms-DEBUG: display: <14>[ 62.586383] [IGT] kms_atomic: executing populating plane data: E.17, fb 0 (kms_atomic:419) igt_kms-DEBUG: plane E.17: Setting<14>[ 62.599587] [IGT] kms_atomic: starting subtest plane-primary-overlay-mutable-zpos property "SRC_X" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane E.17: Setting property "SRC_Y" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane E.17: Setting property "SRC_W" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane E.17: Setting property "SRC_H" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane E.17: Setting property "CRTC_X" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane E.17: Setting property "CRTC_Y" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane E.17: Setting property "CRTC_W" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane E.17: Setting property "CRTC_H" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane E.17: Setting property "FB_ID" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane E.17: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: plane E.17: Setting property "rotation" to 0x1/1 (kms_atomic:419) igt_kms-DEBUG: plane E.17: Setting property "alpha" to 0xffff/65535 (kms_atomic:419) igt_kms-DEBUG: display: HDMI-A-1: preparing atomic, pipe: None (kms_atomic:419) igt_kms-DEBUG: HDMI-A-1: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: display: HDMI-A-2: preparing atomic, pipe: None (kms_atomic:419) igt_kms-DEBUG: HDMI-A-2: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: display: Writeback-1: preparing atomic, pipe: A (kms_atomic:419) igt_kms-DEBUG: Writeback-<14>[ 62.728428] [IGT] kms_atomic: finished subtest plane-primary-overlay-mutable-zpos, SKIP 1: Setti<14>[ 62.728682] [IGT] kms_atomic: exiting, ret=77 ng prope<8>[ 62.742741] rty "CRTC_ID" to 0x31/49 (kms_atomic:419) igt_kms-DEBUG: Writeback-1: Setting property <14>[ 62.760096] [IGT] kms_atomic: executing "WRITEBACK_FB_ID" to 0x0/0 (kms_atomic:419) igt_kms-DEBUG: display: } (kms_atomic:419) igt_fb-DEBUG: igt_create_fb_with_bo_size(width=<14>[ 62.773312] [IGT] kms_atomic: starting subtest plane-immutable-zpos 4096, he<14>[ 62.773646] [IGT] kms_atomic: starting dynamic subtest pipe-A-Writeback-1 ight=2160, format=XR24(0x34325258), modifier=0x0, size=0) (kms_atomic:419) igt_kms-CRITICAL: Test assertion failure function kmstest_dumb_create, file ../lib/igt_kms.c:1295: (kms_atomic:419) igt_kms-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0xB2)) << 0) | ((((sizeof(struct drm_mode_create_dumb)))) << ((0+8)+8)))), (&create)) == 0 (kms_atomic:419) igt_kms-CRITICAL: Last errno: 12, Cannot allocate memory (kms_atomic:419) igt_kms-CRITICAL: error: -1 != 0 (kms_atomic:419) igt_core-INFO: Stack trace: (kms_atomic:419) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_atomic:419) igt_core-INFO: #1 ../lib/igt_kms.c:1297 kmstest_dumb_create() (kms_atomic:419) igt_core-INFO: #2 ../lib/igt_fb.c:1249 create_bo_for_fb.isra.0() (kms_atomic:419) igt_core-INFO: #3 ../lib/igt_fb.c:2112 igt_create_fb_with_bo_size() (kms_atomic:419) igt_core-INFO: #4 ../lib/igt_fb.c:2155 igt_create_fb() (kms_atomic:419) igt_core-INFO: #5 ../lib/igt_fb.c:2268 igt_create_color_pattern_fb() (kms_atomic:419) igt_core-INFO: #6 [+0xe4515cd0] (kms_atomic:419) igt_core-INFO: #7 [+0xe45124b8] (kms_atomic:419) igt_core-INFO: #8 [__libc_init_fir<14>[ 62.899912] [IGT] kms_atomic: finished subtest pipe-A-Writeback-1, SKIP st+0x80]<14>[ 62.899979] [IGT] kms_atomic: finished subtest plane-immutable-zpos, SKIP (kms_a<14>[ 62.900203] [IGT] kms_atomic: exiting, ret=77 tomic:41<8>[ 62.905410] 9) igt_core-INFO: #9 [__libc_start_mai<14>[ 62.930121] [IGT] kms_atomic: executing n+0x98] (kms_atomic:419) igt_core-INFO: #10 [+0xe45124f0] **** END **** <14>[ 62.942950] [IGT] kms_atomic: starting subtest test-only [1mDynamic subtest pipe-A-Writeback-1: FAIL (1.510s)[0m [1mSubtest plane-primary-legacy: FAIL (1.511s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305760 for randomisation Opened device: /dev/dri/card0 Starting subtest: plane-primary-overlay-mutable-zpos No dynamic tests executed. [1mSubtest plane-primary-overlay-mutable-zpos: SKIP (0.129s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305760 for randomisation Opened device: /dev/dri/card0 Starting subtest: plane-immutable-zpos Starting dynamic subtest: pipe-A-Writeback-1 Test requirement not met in function igt_require_pipe_crc, file ../lib/igt_pipe_crc.c:211: Test requirement: fstatat(dir, "crtc-0/crc/control", &stat, 0) == 0 CRCs not supported on this platform Last errno: 2, No such file or directory [1mDynamic subtest pipe-A-Writeback-1: SKIP (0.126s)[0m No dynamic tests executed. [1mSubtest plane-immutable-zpos: SKIP (0.127s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305760 for randomisation Opened device: /dev/dri/card0 Starting subtest: test-only Starting dynamic subtest: pipe-A-Writeback-1 <14>[ 63.072986] [IGT] kms_atomic: starting dynamic subtest pipe-A-Writeback-1 [1mDynamic subtest pipe<14>[ 63.186162] [IGT] kms_atomic: finished subtest pipe-A-Writeback-1, SUCCESS -A-Write<14>[ 63.186226] [IGT] kms_atomic: finished subtest test-only, SUCCESS back-1: <14>[ 63.186365] [IGT] kms_atomic: exiting, ret=0 SUCCESS <8>[ 63.192523] (0.113s)[0m [<14>[ 63.215769] [IGT] kms_atomic: executing 1mSubtest test-only: SUCCESS (0.243s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=<14>[ 63.229276] [IGT] kms_atomic: starting subtest plane-cursor-legacy 17063057<14>[ 63.229640] [IGT] kms_atomic: starting dynamic subtest pipe-A-Writeback-1 61 for randomisation Opened device: /dev/dri/card0 Starting subtest: plane-cursor-legacy Starting dynamic subtest: pipe-A-Writeback-1 [1mDynamic subtest pipe<14>[ 63.360899] [IGT] kms_atomic: finished subtest pipe-A-Writeback-1, SUCCESS -A-Write<14>[ 63.360958] [IGT] kms_atomic: finished subtest plane-cursor-legacy, SUCCESS back-1: <14>[ 63.361110] [IGT] kms_atomic: exiting, ret=0 SUCCESS <8>[ 63.366967] (0.131s)[0m [<14>[ 63.392275] [IGT] kms_atomic: executing 1mSubtest plane-cursor-legacy: SUCCESS (0.132s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) <14>[ 63.405659] [IGT] kms_atomic: starting subtest plane-invalid-params Using IG<14>[ 63.406011] [IGT] kms_atomic: starting dynamic subtest pipe-A-Writeback-1 T_SRANDOM=1706305761 for randomisation Opened device: /dev/dri/card0 Starting subtest: plane-invalid-params Starting dynamic subtest: pipe-A-Writeback-1 (kms_atomic:434) igt_kms-CRITICAL: Test assertio<3>[ 63.536858] [drm:vc4_bo_create [vc4]] *ERROR* Failed to allocate from CMA: <6>[ 63.536909] vc4-drm gpu: [drm] dumb: 34560kb BOs (1) n failure function kmstest_dumb_create, file ../lib/igt_kms.c:1295: (kms_atomic:434) igt_kms-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0xB2)) << 0) | ((((sizeof(struct drm_mode_create_dumb)))) << ((0+8)+8)))), (&create)) == 0 (kms_atomic:434) igt_kms-CRITICAL: Last errno: 12, Cannot allocate memory (kms_atomic:434) igt_kms-CRITICAL: error: -1 != 0 Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:1297 kmstest_dumb_create() #2 ../lib/igt_fb.c:1249 create_bo_for_fb.isra.0() #3 ../lib/igt_fb.c:2112 igt_create_fb_with_bo_size() #4 ../lib/igt_fb.c:2155 igt_create_fb() #5 ../lib/igt_fb.c:2226 igt_create_pattern_fb() #6 [+0xd20d54dc] #7 [+0xd20d24b8] #8 [__libc_init_first+0x80] #9 [__libc_start_main+0x98] #10 [+0xd20d24f0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** (kms_atomic:434) igt_kms-DEBUG: plane B.17: Setting property "alpha" to 0xffff/65535 (kms_atomic:434) igt_kms-DEBUG: Pipe C: Setting property "MODE_ID" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: Pipe C: Setting property "ACTIVE" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: display: populating plane data: C.0, fb 0 (kms_atomic:434) igt_kms-DEBUG: plane C.0: Setting property "SRC_X" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane C.0: Setting property "SRC_Y" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane C.0: Setting property "SRC_W" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane C.0: Setting property "SRC_H" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane C.0: Setting property "CRTC_X" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane C.0: Setting property "CRTC_Y" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane C.0: Setting property "CRTC_W" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane C.0: Setting property "CRTC_H" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane C.0: Setting property "FB_ID" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane C.0: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane C.0: Setting property "rotation" to 0x1/1 (kms_atomic:434) igt_kms-DEBUG: plane C.0: Setting property "alpha" to 0xffff/65535 (kms_atomic:434) igt_kms-DEBUG: display: populating plane data: C.17, fb 0 (kms_atomic:434) igt_kms-DEBUG: plane C.17: Setting property "SRC_X" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane C.17: Setting property "SRC_Y" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane C.17: Setting property "SRC_W" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane C.17: Setting property "SRC_H" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane C.17: Setting property "CRTC_X" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane C.17: Setting property "CRTC_Y" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane C.17: Setting property "CRTC_W" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane C.17: Setting property "CRTC_H" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane C.17: Setting property "FB_ID" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane C.17: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane C.17: Setting property "rotation" to 0x1/1 (kms_atomic:434) igt_kms-DEBUG: plane C.17: Setting property "alpha" to 0xffff/65535 (kms_atomic:434) igt_kms-DEBUG: Pipe D: Setting property "MODE_ID" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: Pipe D: Setting property "ACTIVE" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: display: populating plane data: D.0, fb 0 (kms_atomic:434) igt_kms-DEBUG: plane D.0: Setting property "SRC_X" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane D.0: Setting property "SRC_Y" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane D.0: Setting property "SRC_W" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane D.0: Setting property "SRC_H" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane D.0: Setting property "CRTC_X" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane D.0: Setting property "CRTC_Y" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane D.0: Setting property "CRTC_W" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane D.0: Setting property "CRTC_H" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane D.0: Setting property "FB_ID" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane D.0: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane D.0: Setting property "rotation" to 0x1/1 (kms_atomic:434) igt_kms-DEBUG: plane D.0: Setting property "alpha" to 0xffff/65535 (kms_atomic:434) igt_kms-DEBUG: display: populating plane data: D.17, fb 0 (kms_atomic:434) igt_kms-DEBUG: plane D.17: Setting property "SRC_X" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane D.17: Setting property "SRC_Y" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane D.17: Setting property "SRC_W" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane D.17: Setting property "SRC_H" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane D.17: Setting property "CRTC_X" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane D.17: Setting property "CRTC_Y" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane D.17: Setting property "CRTC_W" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane D.17: Setting property "CRTC_H" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane D.17: Setting property "FB_ID" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane D.17: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane D.17: Setting property "rotation" to 0x1/1 (kms_atomic:434) igt_kms-DEBUG: plane D.17: Setting property "alpha" to 0xffff/65535 (kms_atomic:434) igt_kms-DEBUG: Pipe E: Setting property "MODE_ID" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: Pipe E: Setting property "ACTIVE" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: display: populating plane data: E.0, fb 0 (kms_atomic:434) igt_kms-DEBUG: plane E.0: Setting property "SRC_X" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane E.0: Setting property "SRC_Y" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane E.0: Setting property "SRC_W" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane E.0: Setting property "SRC_H" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane E.0: Setting property "CRTC_X" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane E.0: Setting property "CRTC_Y" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane E.0: Setting property "CRTC_W" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane E.0: Setting property "CRTC_H" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane E.0: Setting property "FB_ID" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane E.0: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane E.0: Setting property "rotation" to 0x1/1 (kms_atomic:434) igt_kms-DEBUG: plane E.0: Setting property "alpha" to 0xffff/65535 (kms_atomic:434) igt_kms-DEBUG: display: populating plane data: E.17, fb 0 (kms_atomic:434) igt_kms-DEBUG: plane E.17: Setting property "SRC_X" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane E.17: Setting property "SRC_Y" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane E.17: Setting property "SRC_W" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane E.17: Setting property "SRC_H" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane E.17: Setting property "CRTC_X" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane E.17: Setting property "CRTC_Y" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane E.17: Setting property "CRTC_W" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane E.17: Setting property "CRTC_H" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane E.17: Setting property "FB_ID" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane E.17: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane E.17: Setting property "rotation" to 0x1/1 (kms_atomic:434) igt_kms-DEBUG: plane E.17: Setting property "alpha" to 0xffff/65535 (kms_atomic:434) igt_kms-DEBUG: display: HDMI-A-1: preparing atomic, pipe: None (kms_atomic:434) igt_kms-DEBUG: HDMI-A-1: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: display: HDMI-A-2: preparing atomic, pipe: None (kms_atomic:434) igt_kms-DEBUG: HDMI-A-2: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: display: Writeback-1: preparing atomic, pipe: A (kms_atomic:434) igt_kms-DEBUG: Writeback-1: Setting property "CRTC_ID" to 0x31/49 (kms_atomic:434) igt_kms-DEBUG: Writeback-1: Setting property "WRITEBACK_FB_ID" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: display: } (kms_atomic:434) igt_kms-DEBUG: display: commit { (kms_atomic:434) igt_kms-DEBUG: display: populating plane data: A.0, fb 45 (kms_atomic:434) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x2d/45 (kms_atomic:434) igt_kms-DEBUG: display: } (kms_atomic:434) igt_kms-DEBUG: display: commit { (kms_atomic:434) igt_kms-DEBUG: display: populating plane data: A.0, fb 49 (kms_atomic:434) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x31/49 (kms_atomic:434) igt_kms-DEBUG: display: } (kms_atomic:434) igt_kms-DEBUG: display: commit { (kms_atomic:434) igt_kms-DEBUG: display: populating plane data: A.0, fb 44 (kms_atomic:434) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x2c/44 (kms_atomic:434) igt_kms-DEBUG: display: } (kms_atomic:434) igt_kms-DEBUG: display: commit { (kms_atomic:434) igt_kms-DEBUG: display: populating plane data: A.0, fb 154 (kms_atomic:434) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x9a/154 (kms_atomic:434) igt_kms-DEBUG: display: } (kms_atomic:434) igt_kms-DEBUG: display: commit { (kms_atomic:434) igt_kms-DEBUG: display: populating plane data: A.0, fb 0 (kms_atomic:434) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: display: } (kms_atomic:434) igt_kms-DEBUG: display: A.0: plane_set_fb(155) (kms_atomic:434) igt_kms-DEBUG: display: A.0: plane_set_size (4096x2160) (kms_atomic:434) igt_kms-DEBUG: display: A.0: fb_set_position(0,0) (kms_atomic:434) igt_kms-DEBUG: display: A.0: fb_set_size(4096x2160) (kms_atomic:434) igt_kms-DEBUG: display: commit { (kms_atomic:434) igt_kms-DEBUG: display: populating plane data: A.0, fb 155 (kms_atomic:434) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0x10000000/268435456 (kms_atomic:434) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x8700000/141557760 (kms_atomic:434) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0x1000/4096 (kms_atomic:434) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x870/2160 (kms_atomic:434) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x9b/155 (kms_atomic:434) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x31/49 (kms_atomic:434) igt_kms-DEBUG: display: } (kms_atomic:434) igt_kms-DEBUG: display: commit { (kms_atomic:434) igt_kms-DEBUG: display: populating plane data: A.0, fb 155 (kms_atomic:434) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x2d/45 (kms_atomic:434) igt_kms-DEBUG: display: } (kms_atomic:434) igt_kms-DEBUG: display: commit { (kms_atomic:434) igt_kms-DEBUG: display: populating plane data: A.0, fb 155 (kms_atomic:434) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x9b/155 (kms_atomic:434) igt_kms-DEBUG: display: } (kms_atomic:434) igt_kms-DEBUG: display: commit { (kms_atomic:434) igt_kms-DEBUG: display: populating plane data: A.0, fb 155 (kms_atomic:434) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x2c/44 (kms_atomic:434) igt_kms-DEBUG: display: } (kms_atomic:434) igt_kms-DEBUG: display: commit { (kms_atomic:434) igt_kms-DEBUG: display: populating plane data<14>[ 64.579553] [IGT] kms_atomic: finished subtest pipe-A-Writeback-1, FAIL : A.0, f<14>[ 64.579694] [IGT] kms_atomic: finished subtest plane-invalid-params, FAIL b 155 (<14>[ 64.581461] [IGT] kms_atomic: exiting, ret=98 kms_atomic:434) igt_kms-DEBUG: plane A.0<8>[ 64.603933] : Setting property "CRTC_ID" to 0x9a/154 (kms_atomic:434) igt_kms-DEBUG: display: } (kms_atomic:434) igt_kms-DEBUG: display: commit { <14>[ 64.624730] [IGT] kms_atomic: executing (kms_atomic:434) igt_kms-DEBUG: display: populating plane data: A.0, fb 155 (kms_atomic:434) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x0/0 (kms_atomic:434) igt_k<14>[ 64.641651] [IGT] kms_atomic: starting subtest plane-invalid-params-fence ms-DEBUG<14>[ 64.641986] [IGT] kms_atomic: starting dynamic subtest pipe-A-Writeback-1 : display: } (kms_atomic:434) igt_kms-DEBUG: display: A.0: plane_set_fb(155) (kms_atomic:434) igt_kms-DEBUG: display: A.0: plane_set_size (4096x2160) (kms_atomic:434) igt_kms-DEBUG: display: A.0: fb_set_position(0,0) (kms_atomic:434) igt_kms-DEBUG: display: A.0: fb_set_size(4096x2160) (kms_atomic:434) igt_kms-DEBUG: display: commit { (kms_atomic:434) igt_kms-DEBUG: display: populating plane data: A.0, fb 155 (kms_atomic:434) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x0/0 (kms_atomic:434) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0x10000000/268435456 (kms_atomic:434) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x8700000/141557760 (kms_atomic:434) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0x1000/4096 (kms_atomic:434) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x870/2160 (kms_atomic:434) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x9b/155 (kms_atomic:434) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x31/49 (kms_atomic:434) igt_kms-DEBUG: display: } (kms_atomic:434) igt_fb-DEBUG: igt_create_fb_with_bo_size(width=4095, height=2159, format=XR<14>[ 64.767985] [IGT] kms_atomic: finished subtest pipe-A-Writeback-1, SKIP 24(0x343<14>[ 64.768049] [IGT] kms_atomic: finished subtest plane-invalid-params-fence, SKIP 25258), <14>[ 64.768275] [IGT] kms_atomic: exiting, ret=77 modifier<8>[ 64.773357] =0x0, size=0) (kms_atom<14>[ 64.799247] [IGT] kms_atomic: executing ic:434) igt_kms-CRITICAL: Test assertion failure function kmstest_dumb_create, file ../l<14>[ 64.812014] [IGT] kms_atomic: starting subtest crtc-invalid-params ib/igt_k<14>[ 64.812358] [IGT] kms_atomic: starting dynamic subtest pipe-A-Writeback-1 ms.c:1295: (kms_atomic:434) igt_kms-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0xB2)) << 0) | ((((sizeof(struct drm_mode_create_dumb)))) << ((0+8)+8)))), (&create)) == 0 (kms_atomic:434) igt_kms-CRITICAL: Last errno: 12, Cannot allocate memory (kms_atomic:434) igt_kms-CRITICAL: error: -1 != 0 (kms_atomic:434) igt_core-INFO: Stack trace: (kms_atomic:434) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_atomic:434) igt_core-INFO: #1 ../lib/igt_kms.c:1297 kmstest_dumb_create() (kms_atomic:434) igt_core-INFO: #2 ../lib/igt_fb.c:1249 create_bo_for_fb.isra.0() (kms_atomic:434) igt_core-INFO: #3 ../lib/igt_fb.c:2112 igt_create_fb_with_bo_size() (kms_atomic:434) igt_core-INFO: #4 ../lib/igt_fb.c:2155 igt_create_fb() (kms_atomic:434) igt_core-INFO: #5 ../lib/igt_fb.c:2226 igt_create_pattern_fb() (kms_atomic:434) igt_core-INFO: #6 [+0xd20d54dc] (kms_atomic:434) igt_core-INFO: #7 [+0xd20d24b8] (kms_atomic:434) igt_core-INFO: #8 [__libc_init_first+0x80] (kms_atomic:434) igt_core-INFO: #9 [__libc_start_main+0x98] (kms_atomic:434) igt_core-INFO: #10 [+0xd20d24f0] **** END **** [1mDynamic subtest pipe-A-Writeback-1: FAIL (1.173s)[0m [1mSubtest plane-invalid-params: FAIL (1.174s)[0m IG<14>[ 64.943985] [IGT] kms_atomic: finished subtest pipe-A-Writeback-1, SUCCESS T-Versio<14>[ 64.944045] [IGT] kms_atomic: finished subtest crtc-invalid-params, SUCCESS n: 1.28-<14>[ 64.944167] [IGT] kms_atomic: exiting, ret=0 ga44ebfe<8>[ 64.949240] (aarch64) (Linux: 5.10.224-cip5<14>[ 64.974822] [IGT] kms_atomic: executing 2-rt22 aarch64) Using IGT_SRANDOM=1706305762 for randomisation Opened device: /dev/dri<14>[ 64.987600] [IGT] kms_atomic: starting subtest crtc-invalid-params-fence /card0 <14>[ 64.987955] [IGT] kms_atomic: starting dynamic subtest pipe-A-Writeback-1 Starting subtest: plane-invalid-params-fence Starting dynamic subtest: pipe-A-Writeback-1 Test requirement not met in function igt_require_sw_sync, file ../lib/sw_sync.c:265: Test requirement: kernel_has_sw_sync() Last errno: 2, No such file or directory [1mDynamic subtest pipe-A-Writeback-1: SKIP (0.126s)[0m No dynamic tests executed. [1mSubtest plane-invalid-params-fence: SKIP (0.126s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305762 for randomisation Opened device: /dev/dri/card0 Starting subtest: crtc-invalid-params Starting dynamic subtest: pipe-A-Writeback-1 [1mDynamic subtest pipe-A-Writeback-1: SUCCESS (0.132s)[0m [1mSubtest crtc-invalid-params: SUCCESS (0.132s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305762 for randomisation Opened device: /dev/dri/card0 Starting subtest: crtc-invalid-params-fence Starting dynamic subtest: pipe-A-Writeback-1 Test requirement not met<14>[ 65.117762] [IGT] kms_atomic: finished subtest pipe-A-Writeback-1, SKIP in func<14>[ 65.117827] [IGT] kms_atomic: finished subtest crtc-invalid-params-fence, SKIP tion igt<14>[ 65.118045] [IGT] kms_atomic: exiting, ret=77 _require<8>[ 65.123903] _sw_sync, file ../lib/sw_sync.c:265: Te<14>[ 65.149735] [IGT] kms_atomic: executing st requirement: kernel_has_sw_sync() Last errno: 2, No such file or directory [1mDyna<14>[ 65.162521] [IGT] kms_atomic: starting subtest atomic-invalid-params mic subt<14>[ 65.162873] [IGT] kms_atomic: starting dynamic subtest pipe-A-Writeback-1 est pipe-A-Writeback-1: SKIP (0.130s)[0m No dynamic tests executed. [1mSubtest crtc-invalid-params-fence: SKIP (0.130s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305763 for randomisation Opened device: /dev/dri/card0 Starting subtest: atomic-invalid-params Starting dynamic subtest: pipe-A-Writeback-1 [1mDynamic subtest pipe<14>[ 65.293221] [IGT] kms_atomic: finished subtest pipe-A-Writeback-1, SUCCESS -A-Write<14>[ 65.293284] [IGT] kms_atomic: finished subtest atomic-invalid-params, SUCCESS back-1: <14>[ 65.293408] [IGT] kms_atomic: exiting, ret=0 SUCCESS <8>[ 65.299336] (0.130s)[0m [1mSubtest atomic-invalid-params:<14>[ 65.324953] [IGT] kms_atomic: executing SUCCESS (0.131s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 <14>[ 65.337755] [IGT] kms_atomic: starting subtest atomic-plane-damage aarch64) Using IGT_SRANDOM=1706305763 for randomisation Opened device: /dev/dri/card0 Starting subtest: atomic-plane-damage No dynamic tests execute<14>[ 65.466112] [IGT] kms_atomic: finished subtest atomic-plane-damage, SKIP d. [1m<14>[ 65.466341] [IGT] kms_atomic: exiting, ret=77 Subtest <8>[ 65.472480] atomic-p<8>[ 65.475291] lane-damage: SKIP (0.128s)[0m <8>[ 65.499577] IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.1<14>[ 65.517067] [IGT] kms_flip_event_leak: executing 0.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305763 for randomisation Opene<14>[ 65.530067] [IGT] kms_flip_event_leak: starting subtest basic d device<14>[ 65.530311] [IGT] kms_flip_event_leak: starting dynamic subtest pipe-A-Writeback-1 : /dev/dri/card0 Starting subtest: basic Starting dynamic subtest: pipe-A-Writeback-1 (kms_flip_event<3>[ 65.555615] [drm:vc4_bo_create [vc4]] *ERROR* Failed to allocate from CMA: _leak:45<6>[ 65.555653] vc4-drm gpu: [drm] dumb: 34560kb BOs (1) 5) igt_kms-CRITICAL: Test assertion failure function kmstest_dumb_create, file ../lib/igt_kms.c:1295: (kms_flip_event_leak:455) igt_kms-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0xB2)) << 0) | ((((sizeof(struct drm_mode_create_dumb)))) << ((0+8)+8)))), (&create)) == 0 (kms_flip_event_leak:455) igt_kms-CRITICAL: Last errno: 12, Cannot allocate memory (kms_flip_event_leak:455) igt_kms-CRITICAL: error: -1 != 0 Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:1297 kmstest_dumb_create() #2 ../lib/igt_fb.c:1249 create_bo_for_fb.isra.0() #3 ../lib/igt_fb.c:2112 igt_create_fb_with_bo_size() #4 ../lib/igt_fb.c:2155 igt_create_fb() #5 [+0xc6f91964] #6 [+0xc6f9146c] #7 [__libc_init_first+0x80] #8 [__libc_start_main+0x98] #9 [+0xc6f914b0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** (kms_flip_event_leak:455) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_flip_event_leak:455) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 5 (kms_flip_event_leak:455) igt_kms-DEBUG: display: SetPlane pipe A, plane 5, disabling (kms_flip_event_leak:455) igt_kms-DEBUG: display: SetProp plane A.5 "rotation" to 0x1/1 (kms_flip_event_leak:455) igt_kms-DEBUG: display: SetProp plane A.5 "alpha" to 0xffff/65535 (kms_flip_event_leak:455) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_flip_event_leak:455) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 6 (kms_flip_event_leak:455) igt_kms-DEBUG: display: SetPlane pipe A, plane 6, disabling (kms_flip_event_leak:455) igt_kms-DEBUG: display: SetProp plane A.6 "rotation" to 0x1/1 (kms_flip_event_leak:455) igt_kms-DEBUG: display: SetProp plane A.6 "alpha" to 0xffff/65535 (kms_flip_event_leak:455) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_flip_event_leak:455) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 7 (kms_flip_event_leak:455) igt_kms-DEBUG: display: SetPlane pipe A, plane 7, disabling (kms_flip_event_leak:455) igt_kms-DEBUG: display: SetProp plane A.7 "rotation" to 0x1/1 (kms_flip_event_leak:455) igt_kms-DEBUG: display: SetProp plane A.7 "alpha" to 0xffff/65535 (kms_flip_event_leak:455) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_flip_event_leak:455) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 8 (kms_flip_event_leak:455) igt_kms-DEBUG: display: SetPlane pipe A, plane 8, disabling (kms_flip_event_leak:455) igt_kms-DEBUG: display: SetProp plane A.8 "rotation" to 0x1/1 (kms_flip_event_leak:455) igt_kms-DEBUG: display: SetProp plane A.8 "alpha" to 0xffff/65535 (kms_flip_event_leak:455) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_flip_event_leak:455) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 9 (kms_flip_event_leak:455) igt_kms-DEBUG: display: SetPlane pipe A, plane 9, disabling (kms_flip_event_leak:455) igt_kms-DEBUG: display: SetProp plane A.9 "rotation" to 0x1/1 (kms_flip_event_leak:455) igt_kms-DEBUG: display: SetProp plane A.9 "alpha" to 0xffff/65535 (kms_flip_event_leak:455) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_flip_event_leak:455) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 10 (kms_flip_event_leak:455) igt_kms-DEBUG: display: SetPlane pipe A, plane 10, disabling (kms_flip_event_leak:455) igt_kms-DEBUG: display: SetProp plane A.10 "rotation" to 0x1/1 (kms_flip_event_leak:455) igt_kms-DEBUG: display: SetProp plane A.10 "alpha" to 0xffff/65535 (kms_flip_event_leak:455) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_flip_event_leak:455) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 11 (kms_flip_event_leak:455) igt_kms-DEBUG: display: SetPlane pipe A, plane 11, disabling (kms_flip_event_leak:455) igt_kms-DEBUG: display: SetProp plane A.11 "rotation" to 0x1/1 (kms_flip_event_leak:455) igt_kms-DEBUG: display: SetProp plane A.11 "alpha" to 0xffff/65535 (kms_flip_event_leak:455) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_flip_event_leak:455) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 12 (kms_flip_event_leak:455) igt_kms-DEBUG: display: SetPlane pipe A, plane 12, disabling (kms_flip_event_leak:455) igt_kms-DEBUG: display: SetProp plane A.12 "rotation" to 0x1/1 (kms_flip_event_leak:455) igt_kms-DEBUG: display: SetProp plane A.12 "alpha" to 0xffff/65535 (kms_flip_event_leak:455) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_flip_event_leak:455) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 13 (kms_flip_event_leak:455) igt_kms-DEBUG: display: SetPlane pipe A, plane 13, disabling (kms_flip_event_leak:455) igt_kms-DEBUG: display: SetProp plane A.13 "rotation" to 0x1/1 (kms_flip_event_leak:455) igt_kms-DEBUG: display: SetProp plane A.13 "alpha" to 0xffff/65535 (kms_flip_event_leak:455) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_flip_event_leak:455) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 14 (kms_flip_event_leak:455) igt_kms-DEBUG: display: SetPlane pipe A, plane 14, disabling (kms_flip_event_leak:455) igt_kms-DEBUG: display: SetProp plane A.14 "rotation" to 0x1/1 (kms_flip_event_leak:455) igt_kms-DEBUG: display: SetProp plane A.14 "alpha" to 0xffff/65535 (kms_flip_event_leak:455) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_flip_event_leak:455) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 15 (kms_flip_event_leak:455) igt_kms-DEBUG: display: SetPlane pipe A, plane 15, disabling (kms_flip_event_leak:455) igt_kms-DEBUG: display: SetProp plane A.15 "rotation" to 0x1/1 (kms_flip_event_leak:455) igt_kms-DEBUG: display: SetProp plane A.15 "alpha" to 0xffff/65535 (kms_flip_event_leak:455) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_flip_event_leak:455) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 16 (kms_flip_event_leak:455) igt_kms-DEBUG: display: SetPlane pipe A, plane 16, disabling (kms_flip_event_leak:455) igt_kms-DEBUG: display: SetProp plane A.16 "rotation" to 0x1/1 (kms_flip_event_leak:455) igt_kms-DEBUG: display: SetProp plane A.16 "alpha" to 0xffff/65535 (kms_flip_event_leak:455) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_flip_event_leak:455) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 17 (kms_flip_event_leak:455) igt_kms-DEBUG: display: SetCursor pipe A, disabling (kms_flip_event_leak:455) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0) (kms_flip_event_leak:455) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_flip_event_leak:455) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 0 (kms_flip_event_leak:455) igt_kms-DEBUG: display: SetCrtc pipe B, disabling (kms_flip_event_leak:455) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_flip_event_leak:455) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 17 (kms_flip_event_leak:455) igt_kms-DEBUG: display: SetCursor<14>[ 66.259091] [IGT] kms_flip_event_leak: finished subtest pipe-A-Writeback-1, FAIL pipe B,<14>[ 66.259242] [IGT] kms_flip_event_leak: finished subtest basic, FAIL disabli<14>[ 66.260855] [IGT] kms_flip_event_leak: exiting, ret=98 ng (kms_flip_event_leak<8>[ 66.283094] :455) ig<8>[ 66.285060] t_kms-DEBUG: display: MoveCursor pipe B, (0, 0) (kms_flip_event_leak:455) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_i<8>[ 66.306344] dx < pipe->n_planes (kms_flip_event_leak:455) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 0 (<14>[ 66.322957] [IGT] kms_prop_blob: executing kms_flip<14>[ 66.323322] [IGT] kms_prop_blob: starting subtest basic _event_l<14>[ 66.323408] [IGT] kms_prop_blob: finished subtest basic, SUCCESS eak:455)<14>[ 66.323523] [IGT] kms_prop_blob: exiting, ret=0 igt_kms<8>[ 66.328541] <14>[ 66.348680] [IGT] kms_prop_blob: executing -DEBUG: <14>[ 66.360543] [IGT] kms_prop_blob: starting subtest blob-prop-core display: SetCrtc pipe C, disabling (kms_flip_event_leak:455) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_flip_event_leak:455) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 17 (kms_flip_event_leak:455) igt_kms-DEBUG: display: SetCursor pipe C, disabling (kms_flip_event_leak:455) igt_kms-DEBUG: display: MoveCursor pipe C, (0, 0) (kms_flip_event_leak:455) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_flip_event_leak:455) igt_kms-DEBUG: display: Fixing up initial rotation pipe D, plane 0 (kms_flip_event_leak:455) igt_kms-DEBUG: display: SetCrtc pipe D, disabling (kms_flip_event_leak:455) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_flip_event_leak:455) igt_kms-DEBUG: display: Fixing up initial rotation pipe D, plane 17 (kms_flip_event_leak:455) igt_kms-DEBUG: display: SetCursor pipe D, disabling (kms_flip_event_leak:455) igt_kms-DEBUG: display: MoveCursor pipe D, (0, 0) (kms_flip_event_leak:455) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_flip_event_leak:455) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 0 (kms_flip_event_leak:455) igt_kms-DEBUG: display: SetCrtc pipe E, disabling (kms_flip_event_leak:455) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_flip_event_leak:455) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 17 (kms_flip_event_leak:455) igt_kms-DEBUG: display: SetCursor pipe E, disabling (kms_flip_event_leak:455) igt_kms-DEBUG: display: MoveCursor pipe E, (0, 0) (kms_flip_event_leak:455) igt_kms-DEBUG: display: } (kms_flip_event_leak:455) drmtest-DEBUG: Force option used: Using driver vc4 (kms_flip_event_leak:455) drmtest-DEBUG: Opened previously opened device: /dev/dri/card0 (kms_flip_event_leak:455) drmtest-DEBUG: Test requirement passed: !(fd<0) (kms_flip_event_leak:455) igt_fb-DEBUG: igt_create_fb_with_bo_size(width=4096, height=2160, format=XR24(0x34325258), modifier=0x0, size=0) (kms_flip_event_leak:455) igt_kms-CRITICAL: Test assertion failure function kmstest_dumb_create, file ../lib/igt_kms.c:1295: (kms_flip_event_leak:455) igt_kms-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0xB2)) << 0) | ((((sizeof(struct drm_mode_create_dumb)))) << ((0+8)+8)))), (&create)) == 0 (kms_flip_event_leak:455) igt_kms-CRITICAL: Last errno: 12, Cannot allocate memory (kms_flip_event_leak:455) igt_kms-CRITICAL: error: -1 != 0 (kms_flip_event_leak:455) igt_core-INFO: Stack trace: (kms_flip_event_leak:455) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_flip_event_leak:455) igt_core-INFO: #1 ../lib/igt_kms.c:1297 kmstest_dumb_create() (kms_flip_event_leak:455) igt_core-INFO: #2 ../lib/igt_fb.c:1249 create_bo_for_fb.isra.0() (kms_flip_event_leak:455) igt_core-INFO: #3 ../lib/igt_fb.c:2112 igt_create_fb_with_bo_size() (kms_flip_event_leak:455) igt_core-INFO: #4 ../lib/igt_fb.c:2155 igt_create_fb() (kms_flip_event_leak:455) igt_core-INFO: #5 [+0xc6f91964] (kms_flip_event_leak:455) igt_core-INFO: #6 [+0xc6f9146c] (kms_flip_event_leak:455) igt_core-INFO: #7 [__libc_init_first+0x80] (kms_flip_event_leak:455) igt_core-INFO: #8 [__libc_start_main+0x98] (kms_flip_event_leak:455) igt_core-INFO: #9 [+0xc6f914b0] **** END **** [1mDynamic subtest pipe-A-Writeback-1: FAIL (0.729s)[0m [1mSubtest basic: FAIL (0.729s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305764 for randomisation Opened device: /dev/dri/card0 Starting subtest: basic [1mSubtest basic: SUCCESS (0.000s)[0m IG<14>[ 66.705061] [IGT] kms_prop_blob: finished subtest blob-prop-core, SUCCESS T-Versio<14>[ 66.705306] [IGT] kms_prop_blob: exiting, ret=0 n: 1.28-<8>[ 66.711124] ga44ebfe (aarch64) (Linux: 5.10.<14>[ 66.730219] [IGT] kms_prop_blob: executing 224-cip5<14>[ 66.730606] [IGT] kms_prop_blob: starting subtest blob-prop-validate 2-rt22 a<14>[ 66.730780] [IGT] kms_prop_blob: finished subtest blob-prop-validate, SUCCESS arch64) <14>[ 66.730893] [IGT] kms_prop_blob: exiting, ret=0 Using I<8>[ 66.735713] GT_SRAND<14>[ 66.753322] [IGT] kms_prop_blob: executing OM=17063<14>[ 66.772606] [IGT] kms_prop_blob: starting subtest blob-prop-lifetime 05764 fo<14>[ 66.772804] [IGT] kms_prop_blob: finished subtest blob-prop-lifetime, SUCCESS r random<14>[ 66.772897] [IGT] kms_prop_blob: exiting, ret=0 isation <8>[ 66.784538] Opened device: /dev/dri/card0 <14>[ 66.802147] [IGT] kms_prop_blob: executing Starting<14>[ 66.802503] [IGT] kms_prop_blob: starting subtest blob-multiple subtest<14>[ 66.802789] [IGT] kms_prop_blob: finished subtest blob-multiple, SUCCESS : blob-p<14>[ 66.802877] [IGT] kms_prop_blob: exiting, ret=0 <8>[ 66.807695] rop-core<14>[ 66.824386] [IGT] kms_prop_blob: executing [1mSubtest blob-prop-core: SU<14>[ 66.842569] [IGT] kms_prop_blob: starting subtest invalid-get-prop-any CCESS (0<14>[ 66.842644] [IGT] kms_prop_blob: finished subtest invalid-get-prop-any, SUCCESS .000s)[<14>[ 66.842735] [IGT] kms_prop_blob: exiting, ret=0 0m IGT-<8>[ 66.847067] <14>[ 66.866283] [IGT] kms_prop_blob: executing Version: 1.28-ga44ebfe (<14>[ 66.879493] [IGT] kms_prop_blob: starting subtest invalid-get-prop aarch64)<14>[ 66.879566] [IGT] kms_prop_blob: finished subtest invalid-get-prop, SUCCESS (Linux:<14>[ 66.879660] [IGT] kms_prop_blob: exiting, ret=0 5.10.22<8>[ 66.883797] 4-cip52-<14>[ 66.901747] [IGT] kms_prop_blob: executing rt22 aarch64) Using IGT<14>[ 66.915223] [IGT] kms_prop_blob: starting subtest invalid-set-prop-any _SRANDOM<14>[ 66.915287] [IGT] kms_prop_blob: finished subtest invalid-set-prop-any, SUCCESS =1706305<14>[ 66.915370] [IGT] kms_prop_blob: exiting, ret=0 764 for <8>[ 66.919475] randomis<14>[ 66.938251] [IGT] kms_prop_blob: executing ation Opened de<14>[ 66.952079] [IGT] kms_prop_blob: starting subtest invalid-set-prop vice: /d<14>[ 66.952143] [IGT] kms_prop_blob: finished subtest invalid-set-prop, SUCCESS ev/dri/c<14>[ 66.952227] [IGT] kms_prop_blob: exiting, ret=0 ard0 St<8>[ 66.956318] arting s<8>[ 66.957593] ubtest: <8>[ 66.973400] blob-pro<14>[ 66.992472] [IGT] kms_setmode: executing p-valida<14>[ 66.992882] [IGT] kms_setmode: starting subtest basic te [1mSubtest <14>[ 67.003707] [IGT] kms_setmode: finished subtest basic, SKIP blob-pro<14>[ 67.003798] [IGT] kms_setmode: exiting, ret=77 p-valida<8>[ 67.007935] te: SUCCESS (0.0<14>[ 67.023795] [IGT] kms_setmode: executing 00s)[0m<14>[ 67.024168] [IGT] kms_setmode: starting subtest basic-clone-single-crtc IGT-Ve<14>[ 67.024283] [IGT] kms_setmode: finished subtest basic-clone-single-crtc, SKIP rsion: 1<14>[ 67.024371] [IGT] kms_setmode: exiting, ret=77 .28-ga44<8>[ 67.028518] ebfe (aa<14>[ 67.045570] [IGT] kms_setmode: executing rch64) (Linux: 5.10.224-cip52-rt22 aarch64) Usi<14>[ 67.065101] [IGT] kms_setmode: starting subtest invalid-clone-single-crtc ng IGT_S<14>[ 67.065218] [IGT] kms_setmode: finished subtest invalid-clone-single-crtc, SKIP RANDOM=1<14>[ 67.065298] [IGT] kms_setmode: exiting, ret=77 70630576<8>[ 67.069582] 4 for ra<14>[ 67.084838] [IGT] kms_setmode: executing ndomisat<14>[ 67.104509] [IGT] kms_setmode: starting subtest invalid-clone-exclusive-crtc ion Ope<14>[ 67.104628] [IGT] kms_setmode: finished subtest invalid-clone-exclusive-crtc, SKIP ned devi<14>[ 67.104709] [IGT] kms_setmode: exiting, ret=77 ce: /dev<8>[ 67.116378] /dri/card0 Star<14>[ 67.135939] [IGT] kms_setmode: executing ting sub<14>[ 67.136310] [IGT] kms_setmode: starting subtest clone-exclusive-crtc test: bl<14>[ 67.136421] [IGT] kms_setmode: finished subtest clone-exclusive-crtc, SKIP ob-prop-<14>[ 67.136506] [IGT] kms_setmode: exiting, ret=77 <8>[ 67.140581] lifetime<14>[ 67.157201] [IGT] kms_setmode: executing [1mSubtest bl<14>[ 67.175783] [IGT] kms_setmode: starting subtest invalid-clone-single-crtc-stealing ob-prop-<14>[ 67.175901] [IGT] kms_setmode: finished subtest invalid-clone-single-crtc-stealing, SKIP lifetime<14>[ 67.175983] [IGT] kms_setmode: exiting, ret=77 : SUCCES<8>[ 67.180103] S (0.000<8>[ 67.181416] s)[0m <8>[ 67.197398] IGT-Vers<14>[ 67.214279] [IGT] kms_vblank: executing ion: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305764 for randomisation Opened device: /dev/d<14>[ 67.235736] [IGT] kms_vblank: starting subtest invalid ri/card0<14>[ 67.236017] [IGT] kms_vblank: starting dynamic subtest pipe-A-Writeback-1 Starting subtest: blob-multiple [1mSubtest blob-multiple: SUCCESS (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305764 for randomisation Opened device: /dev/dri/card0 Starting subtest: invalid-get-prop-any [1mSubtest invalid-get-prop-any: SUCCESS (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305764 for randomisation Opened device: /dev/dri/card0 Starting subtest: invalid-get-prop [1mSubtest invalid-get-prop: SUCCESS (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305764 for randomisation Opened device: /dev/dri/card0 Starting subtest: invalid-set-prop-any [1mSubtest invalid-set-prop-any: SUCCESS (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305764 for randomisation Opened device: /dev/dri/card0 Starting subtest: invalid-set-prop [1mSubtest invalid-set-prop: SUCCESS (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305764 for randomisation Opened device: /dev/dri/card0 Starting subtest: basic Testing: basic 1 connector combinations Testing: basic 2 connector combinations No dynamic tests executed. [1mSubtest basic: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305765 for randomisation Opened device: /dev/dri/card0 Starting subtest: basic-clone-single-crtc Testing: basic-clone-single-crtc 2 connector combinations No dynamic tests executed. [1mSubtest basic-clone-single-crtc: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305765 for randomisation Opened device: /dev/dri/card0 Starting subtest: invalid-clone-single-crtc Testing: invalid-clone-single-crtc 2 connector combinations No dynamic tests executed. [1mSubtest invalid-clone-single-crtc: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305765 for randomisation Opened device: /dev/dri/card0 Starting subtest: invalid-clone-exclusive-crtc Testing: invalid-clone-exclusive-crtc 2 connector combinations No dynamic tests executed. [1mSubtest invalid-clone-exclusive-crtc: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305765 for randomisation Opened device: /dev/dri/card0 Starting subtest: clone-exclusive-crtc Testing: clone-exclusive-crtc 2 connector combinations No dynamic tests executed. [1mSubtest clone-exclusive-crtc: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305765 for randomisation Opened device: /dev/dri/card0 Starting subtest: invalid-clone-single-crtc-stealing Testing: invalid-clone-single-crtc-stealing 2 connector combinations No dynamic tests executed. [1mSubtest invalid-clone-single-crtc-stealing: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305765 for randomisation Opened device: /dev/dri/card0 Starting subtest: invalid Starting dynamic subtest: pipe-A-Writeback-1 (kms_vblank:512) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:512) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:512) igt_kms-CRITICAL: Last errno: 16, Device or resource busy Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() #2 [+0xe50a338c] #3 [+0xe50a1c78] #4 [__libc_init_first+0x80] #5 [__libc_start_main+0x98] #6 [+0xe50a1cb0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** SetPlane pipe A, plane 4, disabling (kms_vblank:512) igt_kms-DEBUG: display: SetProp plane A.4 "rotation" to 0x1/1 (kms_vblank:512) igt_kms-DEBUG: display: SetProp plane A.4 "alpha" to 0xffff/65535 (kms_vblank:512) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:512) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 5 (kms_vblank:512) igt_kms-DEBUG: display: SetPlane pipe A, plane 5, disabling (kms_vblank:512) igt_kms-DEBUG: display: SetProp plane A.5 "rotation" to 0x1/1 (kms_vblank:512) igt_kms-DEBUG: display: SetProp plane A.5 "alpha" to 0xffff/65535 (kms_vblank:512) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:512) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 6 (kms_vblank:512) igt_kms-DEBUG: display: SetPlane pipe A, plane 6, disabling (kms_vblank:512) igt_kms-DEBUG: display: SetProp plane A.6 "rotation" to 0x1/1 (kms_vblank:512) igt_kms-DEBUG: display: SetProp plane A.6 "alpha" to 0xffff/65535 (kms_vblank:512) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:512) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 7 (kms_vblank:512) igt_kms-DEBUG: display: SetPlane pipe A, plane 7, disabling (kms_vblank:512) igt_kms-DEBUG: display: SetProp plane A.7 "rotation" to 0x1/1 (kms_vblank:512) igt_kms-DEBUG: display: SetProp plane A.7 "alpha" to 0xffff/65535 (kms_vblank:512) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:512) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 8 (kms_vblank:512) igt_kms-DEBUG: display: SetPlane pipe A, plane 8, disabling (kms_vblank:512) igt_kms-DEBUG: display: SetProp plane A.8 "rotation" to 0x1/1 (kms_vblank:512) igt_kms-DEBUG: display: SetProp plane A.8 "alpha" to 0xffff/65535 (kms_vblank:512) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:512) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 9 (kms_vblank:512) igt_kms-DEBUG: display: SetPlane pipe A, plane 9, disabling (kms_vblank:512) igt_kms-DEBUG: display: SetProp plane A.9 "rotation" to 0x1/1 (kms_vblank:512) igt_kms-DEBUG: display: SetProp plane A.9 "alpha" to 0xffff/65535 (kms_vblank:512) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:512) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 10 (kms_vblank:512) igt_kms-DEBUG: display: SetPlane pipe A, plane 10, disabling (kms_vblank:512) igt_kms-DEBUG: display: SetProp plane A.10 "rotation" to 0x1/1 (kms_vblank:512) igt_kms-DEBUG: display: SetProp plane A.10 "alpha" to 0xffff/65535 (kms_vblank:512) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:512) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 11 (kms_vblank:512) igt_kms-DEBUG: display: SetPlane pipe A, plane 11, disabling (kms_vblank:512) igt_kms-DEBUG: display: SetProp plane A.11 "rotation" to 0x1/1 (kms_vblank:512) igt_kms-DEBUG: display: SetProp plane A.11 "alpha" to 0xffff/65535 (kms_vblank:512) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:512) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 12 (kms_vblank:512) igt_kms-DEBUG: display: SetPlane pipe A, plane 12, disabling (kms_vblank:512) igt_kms-DEBUG: display: SetProp plane A.12 "rotation" to 0x1/1 (kms_vblank:512) igt_kms-DEBUG: display: SetProp plane A.12 "alpha" to 0xffff/65535 (kms_vblank:512) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:512) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 13 (kms_vblank:512) igt_kms-DEBUG: display: SetPlane pipe A, plane 13, disabling (kms_vblank:512) igt_kms-DEBUG: display: SetProp plane A.13 "rotation" to 0x1/1 (kms_vblank:512) igt_kms-DEBUG: display: SetProp plane A.13 "alpha" to 0xffff/65535 (kms_vblank:512) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:512) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 14 (kms_vblank:512) igt_kms-DEBUG: display: SetPlane pipe A, plane 14, disabling (kms_vblank:512) igt_kms-DEBUG: display: SetProp plane A.14 "rotation" to 0x1/1 (kms_vblank:512) igt_kms-DEBUG: display: SetProp plane A.14 "alpha" to 0xffff/65535 (kms_vblank:512) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:512) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 15 (kms_vblank:512) igt_kms-DEBUG: display: SetPlane pipe A, plane 15, disabling (kms_vblank:512) igt_kms-DEBUG: display: SetProp plane A.15 "rotation" to 0x1/1 (kms_vblank:512) igt_kms-DEBUG: display: SetProp plane A.15 "alpha" to 0xffff/65535 (kms_vblank:512) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:512) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 16 (kms_vblank:512) igt_kms-DEBUG: display: SetPlane pipe A, plane 16, disabling (kms_vblank:512) igt_kms-DEBUG: display: SetProp plane A.16 "rotation" to 0x1/1 (kms_vblank:512) igt_kms-DEBUG: display: SetProp plane A.16 "alpha" to 0xffff/65535 (kms_vblank:512) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:512) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 17 (kms_vblank:512) igt_kms-DEBUG: display: SetCursor pipe A, disabling (kms_vblank:512) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0) (kms_vblank:512) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:512) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 0 (kms_vblank:512) igt_kms-DEBUG: display: SetCrtc pipe B, disabling (kms_vblank:512) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:512) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 17 (kms_vblank:512) igt_kms-DEBUG: display: SetCursor pipe B, disabling (kms_vblank:512) igt_kms-DEBUG: display: MoveCursor pipe B, (0, 0) (kms_vblank:512) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:512) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 0 (kms_vblank:512) igt_kms-DEBUG: display: SetCrtc pipe C, disabling (kms_vblank:512) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:512) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 17 (kms_vblank:512) igt_kms-DEBUG: display: SetCursor pipe C, disabling (kms_vblank:512) igt_kms-DEBUG: display: MoveCursor pipe C, (0, 0) (kms_vblank:512) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_<14>[ 70.942801] [IGT] kms_vblank: finished subtest pipe-A-Writeback-1, FAIL planes <14>[ 70.942939] [IGT] kms_vblank: finished subtest invalid, FAIL (kms_vbl<14>[ 70.944753] [IGT] kms_vblank: exiting, ret=98 ank:512)<8>[ 70.963536] igt_kms-DEBUG: display: Fixing up initial rotation pipe D, plane 0 (kms_vblank:512) igt_kms-DEBUG:<14>[ 70.979635] [IGT] kms_vblank: executing display: SetCrtc pipe D, disabling (kms_vblank:512) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_<14>[ 70.993174] [IGT] kms_vblank: starting subtest crtc-id planes <14>[ 70.993510] [IGT] kms_vblank: starting dynamic subtest pipe-A-Writeback-1 (kms_vblank:512) igt_kms-DEBUG: display: Fixing up initial rotation pipe D, plane 17 (kms_vblank:512) igt_kms-DEBUG: display: SetCursor pipe D, disabling (kms_vblank:512) igt_kms-DEBUG: display: MoveCursor pipe D, (0, 0) (kms_vblank:512) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:512) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 0 (kms_vblank:512) igt_kms-DEBUG: display: SetCrtc pipe E, disabling (kms_vblank:512) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:512) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 17 (kms_vblank:512) igt_kms-DEBUG: display: SetCursor pipe E, disabling (kms_vblank:512) igt_kms-DEBUG: display: MoveCursor pipe E, (0, 0) (kms_vblank:512) igt_kms-DEBUG: display: } (kms_vblank:512) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:512) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:512) igt_kms-CRITICAL: Last errno: 16, Device or resource busy (kms_vblank:512) igt_core-INFO: Stack trace: (kms_vblank:512) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_vblank:512) igt_core-INFO: #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() (kms_vblank:512) igt_core-INFO: #2 [+0xe50a338c] (kms_vblank:512) igt_core-INFO: #3 [+0xe50a1c78] (kms_vblank:512) igt_core-INFO: #4 [__libc_init_first+0x80] (kms_vblank:512) igt_core-INFO: #5 [__libc_start_main+0x98] (kms_vblank:512) igt_core-INFO: #6 [+0xe50a1cb0] **** END **** [1mDynamic subtest pipe-A-Writeback-1: FAIL (3.707s)[0m [1mSubtest invalid: FAIL (3.707s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305768 for randomisation Opened device: /dev/dri/card0 Starting subtest: crtc-id Starting dynamic subtest: pipe-A-Writeback-1 (kms_vblank:515) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:515) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:515) igt_kms-CRITICAL: Last errno: 16, Device or resource busy Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() #2 [+0xd59e3728] #3 [+0xd59e1c78] #4 [__libc_init_first+0x80] #5 [__libc_start_main+0x98] #6 [+0xd59e1cb0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** SetPlane pipe A, plane 4, disabling (kms_vblank:515) igt_kms-DEBUG: display: SetProp plane A.4 "rotation" to 0x1/1 (kms_vblank:515) igt_kms-DEBUG: display: SetProp plane A.4 "alpha" to 0xffff/65535 (kms_vblank:515) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:515) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 5 (kms_vblank:515) igt_kms-DEBUG: display: SetPlane pipe A, plane 5, disabling (kms_vblank:515) igt_kms-DEBUG: display: SetProp plane A.5 "rotation" to 0x1/1 (kms_vblank:515) igt_kms-DEBUG: display: SetProp plane A.5 "alpha" to 0xffff/65535 (kms_vblank:515) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:515) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 6 (kms_vblank:515) igt_kms-DEBUG: display: SetPlane pipe A, plane 6, disabling (kms_vblank:515) igt_kms-DEBUG: display: SetProp plane A.6 "rotation" to 0x1/1 (kms_vblank:515) igt_kms-DEBUG: display: SetProp plane A.6 "alpha" to 0xffff/65535 (kms_vblank:515) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:515) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 7 (kms_vblank:515) igt_kms-DEBUG: display: SetPlane pipe A, plane 7, disabling (kms_vblank:515) igt_kms-DEBUG: display: SetProp plane A.7 "rotation" to 0x1/1 (kms_vblank:515) igt_kms-DEBUG: display: SetProp plane A.7 "alpha" to 0xffff/65535 (kms_vblank:515) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:515) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 8 (kms_vblank:515) igt_kms-DEBUG: display: SetPlane pipe A, plane 8, disabling (kms_vblank:515) igt_kms-DEBUG: display: SetProp plane A.8 "rotation" to 0x1/1 (kms_vblank:515) igt_kms-DEBUG: display: SetProp plane A.8 "alpha" to 0xffff/65535 (kms_vblank:515) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:515) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 9 (kms_vblank:515) igt_kms-DEBUG: display: SetPlane pipe A, plane 9, disabling (kms_vblank:515) igt_kms-DEBUG: display: SetProp plane A.9 "rotation" to 0x1/1 (kms_vblank:515) igt_kms-DEBUG: display: SetProp plane A.9 "alpha" to 0xffff/65535 (kms_vblank:515) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:515) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 10 (kms_vblank:515) igt_kms-DEBUG: display: SetPlane pipe A, plane 10, disabling (kms_vblank:515) igt_kms-DEBUG: display: SetProp plane A.10 "rotation" to 0x1/1 (kms_vblank:515) igt_kms-DEBUG: display: SetProp plane A.10 "alpha" to 0xffff/65535 (kms_vblank:515) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:515) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 11 (kms_vblank:515) igt_kms-DEBUG: display: SetPlane pipe A, plane 11, disabling (kms_vblank:515) igt_kms-DEBUG: display: SetProp plane A.11 "rotation" to 0x1/1 (kms_vblank:515) igt_kms-DEBUG: display: SetProp plane A.11 "alpha" to 0xffff/65535 (kms_vblank:515) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:515) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 12 (kms_vblank:515) igt_kms-DEBUG: display: SetPlane pipe A, plane 12, disabling (kms_vblank:515) igt_kms-DEBUG: display: SetProp plane A.12 "rotation" to 0x1/1 (kms_vblank:515) igt_kms-DEBUG: display: SetProp plane A.12 "alpha" to 0xffff/65535 (kms_vblank:515) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:515) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 13 (kms_vblank:515) igt_kms-DEBUG: display: SetPlane pipe A, plane 13, disabling (kms_vblank:515) igt_kms-DEBUG: display: SetProp plane A.13 "rotation" to 0x1/1 (kms_vblank:515) igt_kms-DEBUG: display: SetProp plane A.13 "alpha" to 0xffff/65535 (kms_vblank:515) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:515) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 14 (kms_vblank:515) igt_kms-DEBUG: display: SetPlane pipe A, plane 14, disabling (kms_vblank:515) igt_kms-DEBUG: display: SetProp plane A.14 "rotation" to 0x1/1 (kms_vblank:515) igt_kms-DEBUG: display: SetProp plane A.14 "alpha" to 0xffff/65535 (kms_vblank:515) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:515) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 15 (kms_vblank:515) igt_kms-DEBUG: display: SetPlane pipe A, plane 15, disabling (kms_vblank:515) igt_kms-DEBUG: display: SetProp plane A.15 "rotation" to 0x1/1 (kms_vblank:515) igt_kms-DEBUG: display: SetProp plane A.15 "alpha" to 0xffff/65535 (kms_vblank:515) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:515) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 16 (kms_vblank:515) igt_kms-DEBUG: display: SetPlane pipe A, plane 16, disabling (kms_vblank:515) igt_kms-DEBUG: display: SetProp plane A.16 "rotation" to 0x1/1 (kms_vblank:515) igt_kms-DEBUG: display: SetProp plane A.16 "alpha" to 0xffff/65535 (kms_vblank:515) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:515) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 17 (kms_vblank:515) igt_kms-DEBUG: display: SetCursor pipe A, disabling (kms_vblank:515) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0) (kms_vblank:515) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:515) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 0 (kms_vblank:515) igt_kms-DEBUG: display: SetCrtc pipe B, disabling (kms_vblank:515) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:515) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 17 (kms_vblank:515) igt_kms-DEBUG: display: SetCursor pipe B, disabling (kms_vblank:515) igt_kms-DEBUG: display: MoveCursor pipe B, (0, 0) (kms_vblank:515) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:515) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 0 (kms_vblank:515) igt_kms-DEBUG: display: SetCrtc pipe C, disabling (kms_vblank:515) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:515) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 17 (kms_vblank:515) igt_kms-DEBUG: display: SetCursor pipe C, disabling (kms_vblank:515) igt_kms-DEBUG: display: MoveCursor pipe C, (0, 0) (kms_vblank:515) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_<14>[ 74.783495] [IGT] kms_vblank: finished subtest pipe-A-Writeback-1, FAIL planes <14>[ 74.783638] [IGT] kms_vblank: finished subtest crtc-id, FAIL (kms_vbl<14>[ 74.785466] [IGT] kms_vblank: exiting, ret=98 ank:515) igt_kms-DEBUG: display: Fixing up initial r<8>[ 74.805703] otation pipe D, plane 0 (kms_vblank:515) igt_kms-DEBUG: display: SetCrtc pipe D, disabling (kms_vb<14>[ 74.824758] [IGT] kms_vblank: executing lank:515) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:515) igt_kms-DEBUG: display: Fixing up initial rotation pipe D, <14>[ 74.842371] [IGT] kms_vblank: starting subtest accuracy-idle plane 17<14>[ 74.842701] [IGT] kms_vblank: starting dynamic subtest pipe-A-Writeback-1 (kms_vblank:515) igt_kms-DEBUG: display: SetCursor pipe D, disabling (kms_vblank:515) igt_kms-DEBUG: display: MoveCursor pipe D, (0, 0) (kms_vblank:515) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:515) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 0 (kms_vblank:515) igt_kms-DEBUG: display: SetCrtc pipe E, disabling (kms_vblank:515) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:515) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 17 (kms_vblank:515) igt_kms-DEBUG: display: SetCursor pipe E, disabling (kms_vblank:515) igt_kms-DEBUG: display: MoveCursor pipe E, (0, 0) (kms_vblank:515) igt_kms-DEBUG: display: } (kms_vblank:515) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:515) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:515) igt_kms-CRITICAL: Last errno: 16, Device or resource busy (kms_vblank:515) igt_core-INFO: Stack trace: (kms_vblank:515) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_vblank:515) igt_core-INFO: #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() (kms_vblank:515) igt_core-INFO: #2 [+0xd59e3728] (kms_vblank:515) igt_core-INFO: #3 [+0xd59e1c78] (kms_vblank:515) igt_core-INFO: #4 [__libc_init_first+0x80] (kms_vblank:515) igt_core-INFO: #5 [__libc_start_main+0x98] (kms_vblank:515) igt_core-INFO: #6 [+0xd59e1cb0] **** END **** [1mDynamic subtest pipe-A-Writeback-1: FAIL (3.790s)[0m [1mSubtest crtc-id: FAIL (3.790s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305772 for randomisation Opened device: /dev/dri/card0 Starting subtest: accuracy-idle Starting dynamic subtest: pipe-A-Writeback-1 (kms_vblank:518) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:518) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:518) igt_kms-CRITICAL: Last errno: 16, Device or resource busy Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() #2 [+0xdc921f94] #3 [+0xdc922fa0] #4 [+0xdc9231bc] #5 [+0xdc921c78] #6 [__libc_init_first+0x80] #7 [__libc_start_main+0x98] #8 [+0xdc921cb0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** (kms_vblank:518) igt_kms-DEBUG: display: SetProp plane A.4 "rotation" to 0x1/1 (kms_vblank:518) igt_kms-DEBUG: display: SetProp plane A.4 "alpha" to 0xffff/65535 (kms_vblank:518) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:518) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 5 (kms_vblank:518) igt_kms-DEBUG: display: SetPlane pipe A, plane 5, disabling (kms_vblank:518) igt_kms-DEBUG: display: SetProp plane A.5 "rotation" to 0x1/1 (kms_vblank:518) igt_kms-DEBUG: display: SetProp plane A.5 "alpha" to 0xffff/65535 (kms_vblank:518) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:518) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 6 (kms_vblank:518) igt_kms-DEBUG: display: SetPlane pipe A, plane 6, disabling (kms_vblank:518) igt_kms-DEBUG: display: SetProp plane A.6 "rotation" to 0x1/1 (kms_vblank:518) igt_kms-DEBUG: display: SetProp plane A.6 "alpha" to 0xffff/65535 (kms_vblank:518) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:518) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 7 (kms_vblank:518) igt_kms-DEBUG: display: SetPlane pipe A, plane 7, disabling (kms_vblank:518) igt_kms-DEBUG: display: SetProp plane A.7 "rotation" to 0x1/1 (kms_vblank:518) igt_kms-DEBUG: display: SetProp plane A.7 "alpha" to 0xffff/65535 (kms_vblank:518) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:518) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 8 (kms_vblank:518) igt_kms-DEBUG: display: SetPlane pipe A, plane 8, disabling (kms_vblank:518) igt_kms-DEBUG: display: SetProp plane A.8 "rotation" to 0x1/1 (kms_vblank:518) igt_kms-DEBUG: display: SetProp plane A.8 "alpha" to 0xffff/65535 (kms_vblank:518) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:518) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 9 (kms_vblank:518) igt_kms-DEBUG: display: SetPlane pipe A, plane 9, disabling (kms_vblank:518) igt_kms-DEBUG: display: SetProp plane A.9 "rotation" to 0x1/1 (kms_vblank:518) igt_kms-DEBUG: display: SetProp plane A.9 "alpha" to 0xffff/65535 (kms_vblank:518) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:518) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 10 (kms_vblank:518) igt_kms-DEBUG: display: SetPlane pipe A, plane 10, disabling (kms_vblank:518) igt_kms-DEBUG: display: SetProp plane A.10 "rotation" to 0x1/1 (kms_vblank:518) igt_kms-DEBUG: display: SetProp plane A.10 "alpha" to 0xffff/65535 (kms_vblank:518) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:518) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 11 (kms_vblank:518) igt_kms-DEBUG: display: SetPlane pipe A, plane 11, disabling (kms_vblank:518) igt_kms-DEBUG: display: SetProp plane A.11 "rotation" to 0x1/1 (kms_vblank:518) igt_kms-DEBUG: display: SetProp plane A.11 "alpha" to 0xffff/65535 (kms_vblank:518) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:518) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 12 (kms_vblank:518) igt_kms-DEBUG: display: SetPlane pipe A, plane 12, disabling (kms_vblank:518) igt_kms-DEBUG: display: SetProp plane A.12 "rotation" to 0x1/1 (kms_vblank:518) igt_kms-DEBUG: display: SetProp plane A.12 "alpha" to 0xffff/65535 (kms_vblank:518) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:518) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 13 (kms_vblank:518) igt_kms-DEBUG: display: SetPlane pipe A, plane 13, disabling (kms_vblank:518) igt_kms-DEBUG: display: SetProp plane A.13 "rotation" to 0x1/1 (kms_vblank:518) igt_kms-DEBUG: display: SetProp plane A.13 "alpha" to 0xffff/65535 (kms_vblank:518) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:518) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 14 (kms_vblank:518) igt_kms-DEBUG: display: SetPlane pipe A, plane 14, disabling (kms_vblank:518) igt_kms-DEBUG: display: SetProp plane A.14 "rotation" to 0x1/1 (kms_vblank:518) igt_kms-DEBUG: display: SetProp plane A.14 "alpha" to 0xffff/65535 (kms_vblank:518) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:518) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 15 (kms_vblank:518) igt_kms-DEBUG: display: SetPlane pipe A, plane 15, disabling (kms_vblank:518) igt_kms-DEBUG: display: SetProp plane A.15 "rotation" to 0x1/1 (kms_vblank:518) igt_kms-DEBUG: display: SetProp plane A.15 "alpha" to 0xffff/65535 (kms_vblank:518) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:518) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 16 (kms_vblank:518) igt_kms-DEBUG: display: SetPlane pipe A, plane 16, disabling (kms_vblank:518) igt_kms-DEBUG: display: SetProp plane A.16 "rotation" to 0x1/1 (kms_vblank:518) igt_kms-DEBUG: display: SetProp plane A.16 "alpha" to 0xffff/65535 (kms_vblank:518) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:518) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 17 (kms_vblank:518) igt_kms-DEBUG: display: SetCursor pipe A, disabling (kms_vblank:518) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0) (kms_vblank:518) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:518) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 0 (kms_vblank:518) igt_kms-DEBUG: display: SetCrtc pipe B, disabling (kms_vblank:518) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:518) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 17 (kms_vblank:518) igt_kms-DEBUG: display: SetCursor pipe B, disabling (kms_vblank:518) igt_kms-DEBUG: display: MoveCursor pipe B, (0, 0) (kms_vblank:518) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:518) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 0 (kms_vblank:518) igt_kms-DEBUG: display: SetCrtc pipe C, disabling (kms_vblank:518) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:518) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 17 (kms_vblank:518) igt_kms-DEBUG: display: SetCursor pipe C, disabling (kms_vblank:518) igt_kms-DEBUG: display: MoveCursor pipe C, (0, 0) (kms_vblank:518) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && pla<14>[ 78.623504] [IGT] kms_vblank: finished subtest pipe-A-Writeback-1, FAIL ne_idx <<14>[ 78.623651] [IGT] kms_vblank: finished subtest accuracy-idle, FAIL pipe->n<14>[ 78.625462] [IGT] kms_vblank: exiting, ret=98 _planes (kms_vblank:518) igt_kms-DEBUG: display<8>[ 78.647248] : Fixing up initial rotation pipe D, plane 0 (kms_vblank:518) igt_kms-DEBUG: display: SetCrtc pipe D, disabling (kms_vblank:518) igt_k<14>[ 78.668322] [IGT] kms_vblank: executing ms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:518) igt_kms-DEBUG: display: Fixing up <14>[ 78.681133] [IGT] kms_vblank: starting subtest query-idle initial <14>[ 78.681466] [IGT] kms_vblank: starting dynamic subtest pipe-A-Writeback-1 rotation pipe D, plane 17 (kms_vblank:518) igt_kms-DEBUG: display: SetCursor pipe D, disabling (kms_vblank:518) igt_kms-DEBUG: display: MoveCursor pipe D, (0, 0) (kms_vblank:518) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:518) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 0 (kms_vblank:518) igt_kms-DEBUG: display: SetCrtc pipe E, disabling (kms_vblank:518) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:518) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 17 (kms_vblank:518) igt_kms-DEBUG: display: SetCursor pipe E, disabling (kms_vblank:518) igt_kms-DEBUG: display: MoveCursor pipe E, (0, 0) (kms_vblank:518) igt_kms-DEBUG: display: } (kms_vblank:518) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:518) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:518) igt_kms-CRITICAL: Last errno: 16, Device or resource busy (kms_vblank:518) igt_core-INFO: Stack trace: (kms_vblank:518) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_vblank:518) igt_core-INFO: #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() (kms_vblank:518) igt_core-INFO: #2 [+0xdc921f94] (kms_vblank:518) igt_core-INFO: #3 [+0xdc922fa0] (kms_vblank:518) igt_core-INFO: #4 [+0xdc9231bc] (kms_vblank:518) igt_core-INFO: #5 [+0xdc921c78] (kms_vblank:518) igt_core-INFO: #6 [__libc_init_first+0x80] (kms_vblank:518) igt_core-INFO: #7 [__libc_start_main+0x98] (kms_vblank:518) igt_core-INFO: #8 [+0xdc921cb0] **** END **** [1mDynamic subtest pipe-A-Writeback-1: FAIL (3.781s)[0m [1mSubtest accuracy-idle: FAIL (3.781s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305776 for randomisation Opened device: /dev/dri/card0 Starting subtest: query-idle Starting dynamic subtest: pipe-A-Writeback-1 (kms_vblank:521) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:521) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:521) igt_kms-CRITICAL: Last errno: 16, Device or resource busy Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() #2 [+0xc9c41f94] #3 [+0xc9c42fa0] #4 [+0xc9c431bc] #5 [+0xc9c41c78] #6 [__libc_init_first+0x80] #7 [__libc_start_main+0x98] #8 [+0xc9c41cb0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** (kms_vblank:521) igt_kms-DEBUG: display: SetProp plane A.4 "rotation" to 0x1/1 (kms_vblank:521) igt_kms-DEBUG: display: SetProp plane A.4 "alpha" to 0xffff/65535 (kms_vblank:521) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:521) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 5 (kms_vblank:521) igt_kms-DEBUG: display: SetPlane pipe A, plane 5, disabling (kms_vblank:521) igt_kms-DEBUG: display: SetProp plane A.5 "rotation" to 0x1/1 (kms_vblank:521) igt_kms-DEBUG: display: SetProp plane A.5 "alpha" to 0xffff/65535 (kms_vblank:521) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:521) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 6 (kms_vblank:521) igt_kms-DEBUG: display: SetPlane pipe A, plane 6, disabling (kms_vblank:521) igt_kms-DEBUG: display: SetProp plane A.6 "rotation" to 0x1/1 (kms_vblank:521) igt_kms-DEBUG: display: SetProp plane A.6 "alpha" to 0xffff/65535 (kms_vblank:521) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:521) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 7 (kms_vblank:521) igt_kms-DEBUG: display: SetPlane pipe A, plane 7, disabling (kms_vblank:521) igt_kms-DEBUG: display: SetProp plane A.7 "rotation" to 0x1/1 (kms_vblank:521) igt_kms-DEBUG: display: SetProp plane A.7 "alpha" to 0xffff/65535 (kms_vblank:521) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:521) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 8 (kms_vblank:521) igt_kms-DEBUG: display: SetPlane pipe A, plane 8, disabling (kms_vblank:521) igt_kms-DEBUG: display: SetProp plane A.8 "rotation" to 0x1/1 (kms_vblank:521) igt_kms-DEBUG: display: SetProp plane A.8 "alpha" to 0xffff/65535 (kms_vblank:521) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:521) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 9 (kms_vblank:521) igt_kms-DEBUG: display: SetPlane pipe A, plane 9, disabling (kms_vblank:521) igt_kms-DEBUG: display: SetProp plane A.9 "rotation" to 0x1/1 (kms_vblank:521) igt_kms-DEBUG: display: SetProp plane A.9 "alpha" to 0xffff/65535 (kms_vblank:521) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:521) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 10 (kms_vblank:521) igt_kms-DEBUG: display: SetPlane pipe A, plane 10, disabling (kms_vblank:521) igt_kms-DEBUG: display: SetProp plane A.10 "rotation" to 0x1/1 (kms_vblank:521) igt_kms-DEBUG: display: SetProp plane A.10 "alpha" to 0xffff/65535 (kms_vblank:521) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:521) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 11 (kms_vblank:521) igt_kms-DEBUG: display: SetPlane pipe A, plane 11, disabling (kms_vblank:521) igt_kms-DEBUG: display: SetProp plane A.11 "rotation" to 0x1/1 (kms_vblank:521) igt_kms-DEBUG: display: SetProp plane A.11 "alpha" to 0xffff/65535 (kms_vblank:521) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:521) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 12 (kms_vblank:521) igt_kms-DEBUG: display: SetPlane pipe A, plane 12, disabling (kms_vblank:521) igt_kms-DEBUG: display: SetProp plane A.12 "rotation" to 0x1/1 (kms_vblank:521) igt_kms-DEBUG: display: SetProp plane A.12 "alpha" to 0xffff/65535 (kms_vblank:521) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:521) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 13 (kms_vblank:521) igt_kms-DEBUG: display: SetPlane pipe A, plane 13, disabling (kms_vblank:521) igt_kms-DEBUG: display: SetProp plane A.13 "rotation" to 0x1/1 (kms_vblank:521) igt_kms-DEBUG: display: SetProp plane A.13 "alpha" to 0xffff/65535 (kms_vblank:521) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:521) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 14 (kms_vblank:521) igt_kms-DEBUG: display: SetPlane pipe A, plane 14, disabling (kms_vblank:521) igt_kms-DEBUG: display: SetProp plane A.14 "rotation" to 0x1/1 (kms_vblank:521) igt_kms-DEBUG: display: SetProp plane A.14 "alpha" to 0xffff/65535 (kms_vblank:521) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:521) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 15 (kms_vblank:521) igt_kms-DEBUG: display: SetPlane pipe A, plane 15, disabling (kms_vblank:521) igt_kms-DEBUG: display: SetProp plane A.15 "rotation" to 0x1/1 (kms_vblank:521) igt_kms-DEBUG: display: SetProp plane A.15 "alpha" to 0xffff/65535 (kms_vblank:521) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:521) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 16 (kms_vblank:521) igt_kms-DEBUG: display: SetPlane pipe A, plane 16, disabling (kms_vblank:521) igt_kms-DEBUG: display: SetProp plane A.16 "rotation" to 0x1/1 (kms_vblank:521) igt_kms-DEBUG: display: SetProp plane A.16 "alpha" to 0xffff/65535 (kms_vblank:521) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:521) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 17 (kms_vblank:521) igt_kms-DEBUG: display: SetCursor pipe A, disabling (kms_vblank:521) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0) (kms_vblank:521) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:521) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 0 (kms_vblank:521) igt_kms-DEBUG: display: SetCrtc pipe B, disabling (kms_vblank:521) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:521) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 17 (kms_vblank:521) igt_kms-DEBUG: display: SetCursor pipe B, disabling (kms_vblank:521) igt_kms-DEBUG: display: MoveCursor pipe B, (0, 0) (kms_vblank:521) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:521) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 0 (kms_vblank:521) igt_kms-DEBUG: display: SetCrtc pipe C, disabling (kms_vblank:521) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:521) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 17 (kms_vblank:521) igt_kms-DEBUG: display: SetCursor pipe C, disabling (kms_vblank:521) igt_kms-DEBUG: display: MoveCursor pipe C, (0, 0) (kms_vblank:521) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && pla<14>[ 82.463581] [IGT] kms_vblank: finished subtest pipe-A-Writeback-1, FAIL ne_idx <<14>[ 82.463725] [IGT] kms_vblank: finished subtest query-idle, FAIL pipe->n<14>[ 82.465544] [IGT] kms_vblank: exiting, ret=98 _planes (kms_vblank:521) igt_kms-DEBUG: display<8>[ 82.486984] : Fixing up initial rotation pipe D, plane 0 (kms_vblank:521) igt_kms-DEBUG: display: SetCrtc pipe D, disabling (kms_vblank:521) igt_kms-DEBUG<14>[ 82.508040] [IGT] kms_vblank: executing : Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:521) igt_kms-DEBUG: display: Fixing up <14>[ 82.521591] [IGT] kms_vblank: starting subtest query-idle-hang initial <14>[ 82.521714] [IGT] kms_vblank: finished subtest query-idle-hang, SKIP rotation<14>[ 82.521868] [IGT] kms_vblank: exiting, ret=77 pipe D,<8>[ 82.526672] plane 1<14>[ 82.552281] [IGT] kms_vblank: executing 7 (kms_vblank:521) igt_kms-DEBUG: display: SetCursor pipe D, disabling (kms_vblank:521) igt_kms-DEBUG: display: MoveCursor pip<14>[ 82.565045] [IGT] kms_vblank: starting subtest query-forked e D, (0,<14>[ 82.565397] [IGT] kms_vblank: starting dynamic subtest pipe-A-Writeback-1 0) (kms_vblank:521) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:521) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 0 (kms_vblank:521) igt_kms-DEBUG: display: SetCrtc pipe E, disabling (kms_vblank:521) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:521) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 17 (kms_vblank:521) igt_kms-DEBUG: display: SetCursor pipe E, disabling (kms_vblank:521) igt_kms-DEBUG: display: MoveCursor pipe E, (0, 0) (kms_vblank:521) igt_kms-DEBUG: display: } (kms_vblank:521) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:521) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:521) igt_kms-CRITICAL: Last errno: 16, Device or resource busy (kms_vblank:521) igt_core-INFO: Stack trace: (kms_vblank:521) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_vblank:521) igt_core-INFO: #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() (kms_vblank:521) igt_core-INFO: #2 [+0xc9c41f94] (kms_vblank:521) igt_core-INFO: #3 [+0xc9c42fa0] (kms_vblank:521) igt_core-INFO: #4 [+0xc9c431bc] (kms_vblank:521) igt_core-INFO: #5 [+0xc9c41c78] (kms_vblank:521) igt_core-INFO: #6 [__libc_init_first+0x80] (kms_vblank:521) igt_core-INFO: #7 [__libc_start_main+0x98] (kms_vblank:521) igt_core-INFO: #8 [+0xc9c41cb0] **** END **** [1mDynamic subtest pipe-A-Writeback-1: FAIL (3.782s)[0m [1mSubtest query-idle: FAIL (3.782s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305780 for randomisation Opened device: /dev/dri/card0 Starting subtest: query-idle-hang Test requirement not met in function gem_context_require_bannable, file ../lib/i915/gem_context.c:324: Test requirement: has_ban_period || has_bannable Last errno: 22, Invalid argument [1mSubtest query-idle-hang: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305780 for randomisation Opened device: /dev/dri/card0 Starting subtest: query-forked Starting dynamic subtest: pipe-A-Writeback-1 (kms_vblank:527) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:527) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:527) igt_kms-CRITICAL: Last errno: 16, Device or resource busy Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() #2 [+0xdddf1f94] #3 [+0xdddf2fa0] #4 [+0xdddf31bc] #5 [+0xdddf1c78] #6 [__libc_init_first+0x80] #7 [__libc_start_main+0x98] #8 [+0xdddf1cb0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** (kms_vblank:527) igt_kms-DEBUG: display: SetProp plane A.4 "rotation" to 0x1/1 (kms_vblank:527) igt_kms-DEBUG: display: SetProp plane A.4 "alpha" to 0xffff/65535 (kms_vblank:527) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:527) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 5 (kms_vblank:527) igt_kms-DEBUG: display: SetPlane pipe A, plane 5, disabling (kms_vblank:527) igt_kms-DEBUG: display: SetProp plane A.5 "rotation" to 0x1/1 (kms_vblank:527) igt_kms-DEBUG: display: SetProp plane A.5 "alpha" to 0xffff/65535 (kms_vblank:527) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:527) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 6 (kms_vblank:527) igt_kms-DEBUG: display: SetPlane pipe A, plane 6, disabling (kms_vblank:527) igt_kms-DEBUG: display: SetProp plane A.6 "rotation" to 0x1/1 (kms_vblank:527) igt_kms-DEBUG: display: SetProp plane A.6 "alpha" to 0xffff/65535 (kms_vblank:527) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:527) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 7 (kms_vblank:527) igt_kms-DEBUG: display: SetPlane pipe A, plane 7, disabling (kms_vblank:527) igt_kms-DEBUG: display: SetProp plane A.7 "rotation" to 0x1/1 (kms_vblank:527) igt_kms-DEBUG: display: SetProp plane A.7 "alpha" to 0xffff/65535 (kms_vblank:527) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:527) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 8 (kms_vblank:527) igt_kms-DEBUG: display: SetPlane pipe A, plane 8, disabling (kms_vblank:527) igt_kms-DEBUG: display: SetProp plane A.8 "rotation" to 0x1/1 (kms_vblank:527) igt_kms-DEBUG: display: SetProp plane A.8 "alpha" to 0xffff/65535 (kms_vblank:527) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:527) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 9 (kms_vblank:527) igt_kms-DEBUG: display: SetPlane pipe A, plane 9, disabling (kms_vblank:527) igt_kms-DEBUG: display: SetProp plane A.9 "rotation" to 0x1/1 (kms_vblank:527) igt_kms-DEBUG: display: SetProp plane A.9 "alpha" to 0xffff/65535 (kms_vblank:527) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:527) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 10 (kms_vblank:527) igt_kms-DEBUG: display: SetPlane pipe A, plane 10, disabling (kms_vblank:527) igt_kms-DEBUG: display: SetProp plane A.10 "rotation" to 0x1/1 (kms_vblank:527) igt_kms-DEBUG: display: SetProp plane A.10 "alpha" to 0xffff/65535 (kms_vblank:527) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:527) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 11 (kms_vblank:527) igt_kms-DEBUG: display: SetPlane pipe A, plane 11, disabling (kms_vblank:527) igt_kms-DEBUG: display: SetProp plane A.11 "rotation" to 0x1/1 (kms_vblank:527) igt_kms-DEBUG: display: SetProp plane A.11 "alpha" to 0xffff/65535 (kms_vblank:527) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:527) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 12 (kms_vblank:527) igt_kms-DEBUG: display: SetPlane pipe A, plane 12, disabling (kms_vblank:527) igt_kms-DEBUG: display: SetProp plane A.12 "rotation" to 0x1/1 (kms_vblank:527) igt_kms-DEBUG: display: SetProp plane A.12 "alpha" to 0xffff/65535 (kms_vblank:527) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:527) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 13 (kms_vblank:527) igt_kms-DEBUG: display: SetPlane pipe A, plane 13, disabling (kms_vblank:527) igt_kms-DEBUG: display: SetProp plane A.13 "rotation" to 0x1/1 (kms_vblank:527) igt_kms-DEBUG: display: SetProp plane A.13 "alpha" to 0xffff/65535 (kms_vblank:527) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:527) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 14 (kms_vblank:527) igt_kms-DEBUG: display: SetPlane pipe A, plane 14, disabling (kms_vblank:527) igt_kms-DEBUG: display: SetProp plane A.14 "rotation" to 0x1/1 (kms_vblank:527) igt_kms-DEBUG: display: SetProp plane A.14 "alpha" to 0xffff/65535 (kms_vblank:527) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:527) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 15 (kms_vblank:527) igt_kms-DEBUG: display: SetPlane pipe A, plane 15, disabling (kms_vblank:527) igt_kms-DEBUG: display: SetProp plane A.15 "rotation" to 0x1/1 (kms_vblank:527) igt_kms-DEBUG: display: SetProp plane A.15 "alpha" to 0xffff/65535 (kms_vblank:527) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:527) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 16 (kms_vblank:527) igt_kms-DEBUG: display: SetPlane pipe A, plane 16, disabling (kms_vblank:527) igt_kms-DEBUG: display: SetProp plane A.16 "rotation" to 0x1/1 (kms_vblank:527) igt_kms-DEBUG: display: SetProp plane A.16 "alpha" to 0xffff/65535 (kms_vblank:527) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:527) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 17 (kms_vblank:527) igt_kms-DEBUG: display: SetCursor pipe A, disabling (kms_vblank:527) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0) (kms_vblank:527) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:527) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 0 (kms_vblank:527) igt_kms-DEBUG: display: SetCrtc pipe B, disabling (kms_vblank:527) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:527) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 17 (kms_vblank:527) igt_kms-DEBUG: display: SetCursor pipe B, disabling (kms_vblank:527) igt_kms-DEBUG: display: MoveCursor pipe B, (0, 0) (kms_vblank:527) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:527) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 0 (kms_vblank:527) igt_kms-DEBUG: display: SetCrtc pipe C, disabling (kms_vblank:527) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:527) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 17 (kms_vblank:527) igt_kms-DEBUG: display: SetCursor pipe C, disabling (kms_vblank:527) igt_kms-DEBUG: display: MoveCursor pipe C, (0, 0) (kms_vblank:527) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:527) igt_km<14>[ 86.305662] [IGT] kms_vblank: finished subtest pipe-A-Writeback-1, FAIL s-DEBUG:<14>[ 86.305805] [IGT] kms_vblank: finished subtest query-forked, FAIL display<14>[ 86.307589] [IGT] kms_vblank: exiting, ret=98 : Fi<8>[ 86.314767] xing up initial rotation pipe D, plane 0 (kms_v<14>[ 86.337139] [IGT] kms_vblank: executing blank:527) igt_kms-DEBUG: display: SetCrtc pipe D, disabling (kms_vblank:52<14>[ 86.349995] [IGT] kms_vblank: starting subtest query-forked-hang 7) igt_k<14>[ 86.350121] [IGT] kms_vblank: finished subtest query-forked-hang, SKIP ms-DEBUG<14>[ 86.350269] [IGT] kms_vblank: exiting, ret=77 : Test r<8>[ 86.356469] equireme<14>[ 86.380440] [IGT] kms_vblank: executing nt passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:527) igt_kms-DEBUG: display: Fixing up initial rotation pipe D,<14>[ 86.393279] [IGT] kms_vblank: starting subtest query-busy plane 1<14>[ 86.393628] [IGT] kms_vblank: starting dynamic subtest pipe-A-Writeback-1 7 (kms_vblank:527) igt_kms-DEBUG: display: SetCursor pipe D, disabling (kms_vblank:527) igt_kms-DEBUG: display: MoveCursor pipe D, (0, 0) (kms_vblank:527) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:527) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 0 (kms_vblank:527) igt_kms-DEBUG: display: SetCrtc pipe E, disabling (kms_vblank:527) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:527) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 17 (kms_vblank:527) igt_kms-DEBUG: display: SetCursor pipe E, disabling (kms_vblank:527) igt_kms-DEBUG: display: MoveCursor pipe E, (0, 0) (kms_vblank:527) igt_kms-DEBUG: display: } (kms_vblank:527) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:527) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:527) igt_kms-CRITICAL: Last errno: 16, Device or resource busy (kms_vblank:527) igt_core-INFO: Stack trace: (kms_vblank:527) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_vblank:527) igt_core-INFO: #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() (kms_vblank:527) igt_core-INFO: #2 [+0xdddf1f94] (kms_vblank:527) igt_core-INFO: #3 [+0xdddf2fa0] (kms_vblank:527) igt_core-INFO: #4 [+0xdddf31bc] (kms_vblank:527) igt_core-INFO: #5 [+0xdddf1c78] (kms_vblank:527) igt_core-INFO: #6 [__libc_init_first+0x80] (kms_vblank:527) igt_core-INFO: #7 [__libc_start_main+0x98] (kms_vblank:527) igt_core-INFO: #8 [+0xdddf1cb0] **** END **** [1mDynamic subtest pipe-A-Writeback-1: FAIL (3.740s)[0m [1mSubtest query-forked: FAIL (3.741s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305784 for randomisation Opened device: /dev/dri/card0 Starting subtest: query-forked-hang Test requirement not met in function gem_context_require_bannable, file ../lib/i915/gem_context.c:324: Test requirement: has_ban_period || has_bannable Last errno: 22, Invalid argument [1mSubtest query-forked-hang: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305784 for randomisation Opened device: /dev/dri/card0 Starting subtest: query-busy Starting dynamic subtest: pipe-A-Writeback-1 (kms_vblank:533) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:533) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:533) igt_kms-CRITICAL: Last errno: 16, Device or resource busy Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() #2 [+0xb9f21f94] #3 [+0xb9f22fa0] #4 [+0xb9f231bc] #5 [+0xb9f21c78] #6 [__libc_init_first+0x80] #7 [__libc_start_main+0x98] #8 [+0xb9f21cb0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** (kms_vblank:533) igt_kms-DEBUG: display: SetProp plane A.4 "rotation" to 0x1/1 (kms_vblank:533) igt_kms-DEBUG: display: SetProp plane A.4 "alpha" to 0xffff/65535 (kms_vblank:533) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:533) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 5 (kms_vblank:533) igt_kms-DEBUG: display: SetPlane pipe A, plane 5, disabling (kms_vblank:533) igt_kms-DEBUG: display: SetProp plane A.5 "rotation" to 0x1/1 (kms_vblank:533) igt_kms-DEBUG: display: SetProp plane A.5 "alpha" to 0xffff/65535 (kms_vblank:533) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:533) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 6 (kms_vblank:533) igt_kms-DEBUG: display: SetPlane pipe A, plane 6, disabling (kms_vblank:533) igt_kms-DEBUG: display: SetProp plane A.6 "rotation" to 0x1/1 (kms_vblank:533) igt_kms-DEBUG: display: SetProp plane A.6 "alpha" to 0xffff/65535 (kms_vblank:533) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:533) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 7 (kms_vblank:533) igt_kms-DEBUG: display: SetPlane pipe A, plane 7, disabling (kms_vblank:533) igt_kms-DEBUG: display: SetProp plane A.7 "rotation" to 0x1/1 (kms_vblank:533) igt_kms-DEBUG: display: SetProp plane A.7 "alpha" to 0xffff/65535 (kms_vblank:533) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:533) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 8 (kms_vblank:533) igt_kms-DEBUG: display: SetPlane pipe A, plane 8, disabling (kms_vblank:533) igt_kms-DEBUG: display: SetProp plane A.8 "rotation" to 0x1/1 (kms_vblank:533) igt_kms-DEBUG: display: SetProp plane A.8 "alpha" to 0xffff/65535 (kms_vblank:533) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:533) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 9 (kms_vblank:533) igt_kms-DEBUG: display: SetPlane pipe A, plane 9, disabling (kms_vblank:533) igt_kms-DEBUG: display: SetProp plane A.9 "rotation" to 0x1/1 (kms_vblank:533) igt_kms-DEBUG: display: SetProp plane A.9 "alpha" to 0xffff/65535 (kms_vblank:533) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:533) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 10 (kms_vblank:533) igt_kms-DEBUG: display: SetPlane pipe A, plane 10, disabling (kms_vblank:533) igt_kms-DEBUG: display: SetProp plane A.10 "rotation" to 0x1/1 (kms_vblank:533) igt_kms-DEBUG: display: SetProp plane A.10 "alpha" to 0xffff/65535 (kms_vblank:533) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:533) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 11 (kms_vblank:533) igt_kms-DEBUG: display: SetPlane pipe A, plane 11, disabling (kms_vblank:533) igt_kms-DEBUG: display: SetProp plane A.11 "rotation" to 0x1/1 (kms_vblank:533) igt_kms-DEBUG: display: SetProp plane A.11 "alpha" to 0xffff/65535 (kms_vblank:533) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:533) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 12 (kms_vblank:533) igt_kms-DEBUG: display: SetPlane pipe A, plane 12, disabling (kms_vblank:533) igt_kms-DEBUG: display: SetProp plane A.12 "rotation" to 0x1/1 (kms_vblank:533) igt_kms-DEBUG: display: SetProp plane A.12 "alpha" to 0xffff/65535 (kms_vblank:533) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:533) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 13 (kms_vblank:533) igt_kms-DEBUG: display: SetPlane pipe A, plane 13, disabling (kms_vblank:533) igt_kms-DEBUG: display: SetProp plane A.13 "rotation" to 0x1/1 (kms_vblank:533) igt_kms-DEBUG: display: SetProp plane A.13 "alpha" to 0xffff/65535 (kms_vblank:533) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:533) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 14 (kms_vblank:533) igt_kms-DEBUG: display: SetPlane pipe A, plane 14, disabling (kms_vblank:533) igt_kms-DEBUG: display: SetProp plane A.14 "rotation" to 0x1/1 (kms_vblank:533) igt_kms-DEBUG: display: SetProp plane A.14 "alpha" to 0xffff/65535 (kms_vblank:533) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:533) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 15 (kms_vblank:533) igt_kms-DEBUG: display: SetPlane pipe A, plane 15, disabling (kms_vblank:533) igt_kms-DEBUG: display: SetProp plane A.15 "rotation" to 0x1/1 (kms_vblank:533) igt_kms-DEBUG: display: SetProp plane A.15 "alpha" to 0xffff/65535 (kms_vblank:533) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:533) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 16 (kms_vblank:533) igt_kms-DEBUG: display: SetPlane pipe A, plane 16, disabling (kms_vblank:533) igt_kms-DEBUG: display: SetProp plane A.16 "rotation" to 0x1/1 (kms_vblank:533) igt_kms-DEBUG: display: SetProp plane A.16 "alpha" to 0xffff/65535 (kms_vblank:533) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:533) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 17 (kms_vblank:533) igt_kms-DEBUG: display: SetCursor pipe A, disabling (kms_vblank:533) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0) (kms_vblank:533) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:533) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 0 (kms_vblank:533) igt_kms-DEBUG: display: SetCrtc pipe B, disabling (kms_vblank:533) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:533) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 17 (kms_vblank:533) igt_kms-DEBUG: display: SetCursor pipe B, disabling (kms_vblank:533) igt_kms-DEBUG: display: MoveCursor pipe B, (0, 0) (kms_vblank:533) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:533) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 0 (kms_vblank:533) igt_kms-DEBUG: display: SetCrtc pipe C, disabling (kms_vblank:533) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:533) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 17 (kms_vblank:533) igt_kms-DEBUG: display: SetCursor pipe C, disabling (kms_vblank:533) igt_kms-DEBUG: display: MoveCursor pipe C, (0, 0) (kms_vblank:533) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && pla<14>[ 90.144205] [IGT] kms_vblank: finished subtest pipe-A-Writeback-1, FAIL ne_idx <<14>[ 90.144351] [IGT] kms_vblank: finished subtest query-busy, FAIL pipe->n<14>[ 90.146163] [IGT] kms_vblank: exiting, ret=98 _planes (kms_vblank:533) igt_kms-DEBUG: display<8>[ 90.166057] : Fixing up initial rotation pipe D, plane 0 (kms_vblank:533) igt_kms-DEBUG: display: SetCrtc pipe D, disabling (kms_vblank:533) igt_kms-DEBUG<14>[ 90.186159] [IGT] kms_vblank: executing : Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:533<14>[ 90.199133] [IGT] kms_vblank: starting subtest query-busy-hang ) igt_km<14>[ 90.199263] [IGT] kms_vblank: finished subtest query-busy-hang, SKIP s-DEBUG:<14>[ 90.199413] [IGT] kms_vblank: exiting, ret=77 display<8>[ 90.203946] : Fi<14>[ 90.228674] [IGT] kms_vblank: executing xing up initial rotation pipe D, plane 17 (kms_vblank:533) igt_kms-DEBUG: display: SetCursor pipe D, disabling (kms_vblank:533) igt_kms-DEBUG: display: MoveCursor pip<14>[ 90.246248] [IGT] kms_vblank: starting subtest query-forked-busy e D, (0,<14>[ 90.246594] [IGT] kms_vblank: starting dynamic subtest pipe-A-Writeback-1 0) (kms_vblank:533) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:533) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 0 (kms_vblank:533) igt_kms-DEBUG: display: SetCrtc pipe E, disabling (kms_vblank:533) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:533) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 17 (kms_vblank:533) igt_kms-DEBUG: display: SetCursor pipe E, disabling (kms_vblank:533) igt_kms-DEBUG: display: MoveCursor pipe E, (0, 0) (kms_vblank:533) igt_kms-DEBUG: display: } (kms_vblank:533) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:533) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:533) igt_kms-CRITICAL: Last errno: 16, Device or resource busy (kms_vblank:533) igt_core-INFO: Stack trace: (kms_vblank:533) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_vblank:533) igt_core-INFO: #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() (kms_vblank:533) igt_core-INFO: #2 [+0xb9f21f94] (kms_vblank:533) igt_core-INFO: #3 [+0xb9f22fa0] (kms_vblank:533) igt_core-INFO: #4 [+0xb9f231bc] (kms_vblank:533) igt_core-INFO: #5 [+0xb9f21c78] (kms_vblank:533) igt_core-INFO: #6 [__libc_init_first+0x80] (kms_vblank:533) igt_core-INFO: #7 [__libc_start_main+0x98] (kms_vblank:533) igt_core-INFO: #8 [+0xb9f21cb0] **** END **** [1mDynamic subtest pipe-A-Writeback-1: FAIL (3.750s)[0m [1mSubtest query-busy: FAIL (3.751s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305788 for randomisation Opened device: /dev/dri/card0 Starting subtest: query-busy-hang Test requirement not met in function gem_context_require_bannable, file ../lib/i915/gem_context.c:324: Test requirement: has_ban_period || has_bannable Last errno: 22, Invalid argument [1mSubtest query-busy-hang: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305788 for randomisation Opened device: /dev/dri/card0 Starting subtest: query-forked-busy Starting dynamic subtest: pipe-A-Writeback-1 (kms_vblank:539) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:539) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:539) igt_kms-CRITICAL: Last errno: 16, Device or resource busy Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() #2 [+0xb8091f94] #3 [+0xb8092fa0] #4 [+0xb80931bc] #5 [+0xb8091c78] #6 [__libc_init_first+0x80] #7 [__libc_start_main+0x98] #8 [+0xb8091cb0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** (kms_vblank:539) igt_kms-DEBUG: display: SetProp plane A.4 "rotation" to 0x1/1 (kms_vblank:539) igt_kms-DEBUG: display: SetProp plane A.4 "alpha" to 0xffff/65535 (kms_vblank:539) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:539) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 5 (kms_vblank:539) igt_kms-DEBUG: display: SetPlane pipe A, plane 5, disabling (kms_vblank:539) igt_kms-DEBUG: display: SetProp plane A.5 "rotation" to 0x1/1 (kms_vblank:539) igt_kms-DEBUG: display: SetProp plane A.5 "alpha" to 0xffff/65535 (kms_vblank:539) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:539) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 6 (kms_vblank:539) igt_kms-DEBUG: display: SetPlane pipe A, plane 6, disabling (kms_vblank:539) igt_kms-DEBUG: display: SetProp plane A.6 "rotation" to 0x1/1 (kms_vblank:539) igt_kms-DEBUG: display: SetProp plane A.6 "alpha" to 0xffff/65535 (kms_vblank:539) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:539) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 7 (kms_vblank:539) igt_kms-DEBUG: display: SetPlane pipe A, plane 7, disabling (kms_vblank:539) igt_kms-DEBUG: display: SetProp plane A.7 "rotation" to 0x1/1 (kms_vblank:539) igt_kms-DEBUG: display: SetProp plane A.7 "alpha" to 0xffff/65535 (kms_vblank:539) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:539) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 8 (kms_vblank:539) igt_kms-DEBUG: display: SetPlane pipe A, plane 8, disabling (kms_vblank:539) igt_kms-DEBUG: display: SetProp plane A.8 "rotation" to 0x1/1 (kms_vblank:539) igt_kms-DEBUG: display: SetProp plane A.8 "alpha" to 0xffff/65535 (kms_vblank:539) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:539) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 9 (kms_vblank:539) igt_kms-DEBUG: display: SetPlane pipe A, plane 9, disabling (kms_vblank:539) igt_kms-DEBUG: display: SetProp plane A.9 "rotation" to 0x1/1 (kms_vblank:539) igt_kms-DEBUG: display: SetProp plane A.9 "alpha" to 0xffff/65535 (kms_vblank:539) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:539) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 10 (kms_vblank:539) igt_kms-DEBUG: display: SetPlane pipe A, plane 10, disabling (kms_vblank:539) igt_kms-DEBUG: display: SetProp plane A.10 "rotation" to 0x1/1 (kms_vblank:539) igt_kms-DEBUG: display: SetProp plane A.10 "alpha" to 0xffff/65535 (kms_vblank:539) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:539) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 11 (kms_vblank:539) igt_kms-DEBUG: display: SetPlane pipe A, plane 11, disabling (kms_vblank:539) igt_kms-DEBUG: display: SetProp plane A.11 "rotation" to 0x1/1 (kms_vblank:539) igt_kms-DEBUG: display: SetProp plane A.11 "alpha" to 0xffff/65535 (kms_vblank:539) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:539) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 12 (kms_vblank:539) igt_kms-DEBUG: display: SetPlane pipe A, plane 12, disabling (kms_vblank:539) igt_kms-DEBUG: display: SetProp plane A.12 "rotation" to 0x1/1 (kms_vblank:539) igt_kms-DEBUG: display: SetProp plane A.12 "alpha" to 0xffff/65535 (kms_vblank:539) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:539) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 13 (kms_vblank:539) igt_kms-DEBUG: display: SetPlane pipe A, plane 13, disabling (kms_vblank:539) igt_kms-DEBUG: display: SetProp plane A.13 "rotation" to 0x1/1 (kms_vblank:539) igt_kms-DEBUG: display: SetProp plane A.13 "alpha" to 0xffff/65535 (kms_vblank:539) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:539) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 14 (kms_vblank:539) igt_kms-DEBUG: display: SetPlane pipe A, plane 14, disabling (kms_vblank:539) igt_kms-DEBUG: display: SetProp plane A.14 "rotation" to 0x1/1 (kms_vblank:539) igt_kms-DEBUG: display: SetProp plane A.14 "alpha" to 0xffff/65535 (kms_vblank:539) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:539) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 15 (kms_vblank:539) igt_kms-DEBUG: display: SetPlane pipe A, plane 15, disabling (kms_vblank:539) igt_kms-DEBUG: display: SetProp plane A.15 "rotation" to 0x1/1 (kms_vblank:539) igt_kms-DEBUG: display: SetProp plane A.15 "alpha" to 0xffff/65535 (kms_vblank:539) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:539) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 16 (kms_vblank:539) igt_kms-DEBUG: display: SetPlane pipe A, plane 16, disabling (kms_vblank:539) igt_kms-DEBUG: display: SetProp plane A.16 "rotation" to 0x1/1 (kms_vblank:539) igt_kms-DEBUG: display: SetProp plane A.16 "alpha" to 0xffff/65535 (kms_vblank:539) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:539) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 17 (kms_vblank:539) igt_kms-DEBUG: display: SetCursor pipe A, disabling (kms_vblank:539) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0) (kms_vblank:539) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:539) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 0 (kms_vblank:539) igt_kms-DEBUG: display: SetCrtc pipe B, disabling (kms_vblank:539) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:539) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 17 (kms_vblank:539) igt_kms-DEBUG: display: SetCursor pipe B, disabling (kms_vblank:539) igt_kms-DEBUG: display: MoveCursor pipe B, (0, 0) (kms_vblank:539) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:539) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 0 (kms_vblank:539) igt_kms-DEBUG: display: SetCrtc pipe C, disabling (kms_vblank:539) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:539) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 17 (kms_vblank:539) igt_kms-DEBUG: display: SetCursor pipe C, disabling (kms_vblank:539) igt_kms-DEBUG: display: MoveCursor pipe C, (0, 0) (kms_vblank:539) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && pla<14>[ 93.984350] [IGT] kms_vblank: finished subtest pipe-A-Writeback-1, FAIL ne_idx <<14>[ 93.984494] [IGT] kms_vblank: finished subtest query-forked-busy, FAIL pipe->n<14>[ 93.986249] [IGT] kms_vblank: exiting, ret=98 _planes (kms_vblank:539) igt_kms-DEBUG:<8>[ 94.006814] display: Fixing up initial rotation pipe D, plane 0 (kms_vblank:539) igt_kms-DEBUG: display: SetCrtc pipe D, disabling (kms_vblank:53<14>[ 94.027009] [IGT] kms_vblank: executing 9) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes <14>[ 94.039777] [IGT] kms_vblank: starting subtest query-forked-busy-hang (kms_vb<14>[ 94.039893] [IGT] kms_vblank: finished subtest query-forked-busy-hang, SKIP lank:539<14>[ 94.040029] [IGT] kms_vblank: exiting, ret=77 ) igt_km<8>[ 94.044554] s-DEBUG:<14>[ 94.061816] [IGT] kms_vblank: executing display: Fixing up initial rotation pipe D, plane 17 (kms_vblank:539) igt_kms-DEBUG: display: SetCursor pipe D, disabling (kms_vblank:539) igt_kms-DE<14>[ 94.087480] [IGT] kms_vblank: starting subtest wait-idle BUG: dis<14>[ 94.087803] [IGT] kms_vblank: starting dynamic subtest pipe-A-Writeback-1 play: MoveCursor pipe D, (0, 0) (kms_vblank:539) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:539) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 0 (kms_vblank:539) igt_kms-DEBUG: display: SetCrtc pipe E, disabling (kms_vblank:539) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:539) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 17 (kms_vblank:539) igt_kms-DEBUG: display: SetCursor pipe E, disabling (kms_vblank:539) igt_kms-DEBUG: display: MoveCursor pipe E, (0, 0) (kms_vblank:539) igt_kms-DEBUG: display: } (kms_vblank:539) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:539) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:539) igt_kms-CRITICAL: Last errno: 16, Device or resource busy (kms_vblank:539) igt_core-INFO: Stack trace: (kms_vblank:539) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_vblank:539) igt_core-INFO: #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() (kms_vblank:539) igt_core-INFO: #2 [+0xb8091f94] (kms_vblank:539) igt_core-INFO: #3 [+0xb8092fa0] (kms_vblank:539) igt_core-INFO: #4 [+0xb80931bc] (kms_vblank:539) igt_core-INFO: #5 [+0xb8091c78] (kms_vblank:539) igt_core-INFO: #6 [__libc_init_first+0x80] (kms_vblank:539) igt_core-INFO: #7 [__libc_start_main+0x98] (kms_vblank:539) igt_core-INFO: #8 [+0xb8091cb0] **** END **** [1mDynamic subtest pipe-A-Writeback-1: FAIL (3.738s)[0m [1mSubtest query-forked-busy: FAIL (3.738s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305792 for randomisation Opened device: /dev/dri/card0 Starting subtest: query-forked-busy-hang Test requirement not met in function gem_context_require_bannable, file ../lib/i915/gem_context.c:324: Test requirement: has_ban_period || has_bannable Last errno: 22, Invalid argument [1mSubtest query-forked-busy-hang: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305792 for randomisation Opened device: /dev/dri/card0 Starting subtest: wait-idle Starting dynamic subtest: pipe-A-Writeback-1 (kms_vblank:545) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:545) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:545) igt_kms-CRITICAL: Last errno: 16, Device or resource busy Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() #2 [+0xd6871f94] #3 [+0xd6872fa0] #4 [+0xd68731bc] #5 [+0xd6871c78] #6 [__libc_init_first+0x80] #7 [__libc_start_main+0x98] #8 [+0xd6871cb0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** (kms_vblank:545) igt_kms-DEBUG: display: SetProp plane A.4 "rotation" to 0x1/1 (kms_vblank:545) igt_kms-DEBUG: display: SetProp plane A.4 "alpha" to 0xffff/65535 (kms_vblank:545) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:545) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 5 (kms_vblank:545) igt_kms-DEBUG: display: SetPlane pipe A, plane 5, disabling (kms_vblank:545) igt_kms-DEBUG: display: SetProp plane A.5 "rotation" to 0x1/1 (kms_vblank:545) igt_kms-DEBUG: display: SetProp plane A.5 "alpha" to 0xffff/65535 (kms_vblank:545) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:545) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 6 (kms_vblank:545) igt_kms-DEBUG: display: SetPlane pipe A, plane 6, disabling (kms_vblank:545) igt_kms-DEBUG: display: SetProp plane A.6 "rotation" to 0x1/1 (kms_vblank:545) igt_kms-DEBUG: display: SetProp plane A.6 "alpha" to 0xffff/65535 (kms_vblank:545) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:545) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 7 (kms_vblank:545) igt_kms-DEBUG: display: SetPlane pipe A, plane 7, disabling (kms_vblank:545) igt_kms-DEBUG: display: SetProp plane A.7 "rotation" to 0x1/1 (kms_vblank:545) igt_kms-DEBUG: display: SetProp plane A.7 "alpha" to 0xffff/65535 (kms_vblank:545) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:545) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 8 (kms_vblank:545) igt_kms-DEBUG: display: SetPlane pipe A, plane 8, disabling (kms_vblank:545) igt_kms-DEBUG: display: SetProp plane A.8 "rotation" to 0x1/1 (kms_vblank:545) igt_kms-DEBUG: display: SetProp plane A.8 "alpha" to 0xffff/65535 (kms_vblank:545) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:545) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 9 (kms_vblank:545) igt_kms-DEBUG: display: SetPlane pipe A, plane 9, disabling (kms_vblank:545) igt_kms-DEBUG: display: SetProp plane A.9 "rotation" to 0x1/1 (kms_vblank:545) igt_kms-DEBUG: display: SetProp plane A.9 "alpha" to 0xffff/65535 (kms_vblank:545) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:545) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 10 (kms_vblank:545) igt_kms-DEBUG: display: SetPlane pipe A, plane 10, disabling (kms_vblank:545) igt_kms-DEBUG: display: SetProp plane A.10 "rotation" to 0x1/1 (kms_vblank:545) igt_kms-DEBUG: display: SetProp plane A.10 "alpha" to 0xffff/65535 (kms_vblank:545) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:545) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 11 (kms_vblank:545) igt_kms-DEBUG: display: SetPlane pipe A, plane 11, disabling (kms_vblank:545) igt_kms-DEBUG: display: SetProp plane A.11 "rotation" to 0x1/1 (kms_vblank:545) igt_kms-DEBUG: display: SetProp plane A.11 "alpha" to 0xffff/65535 (kms_vblank:545) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:545) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 12 (kms_vblank:545) igt_kms-DEBUG: display: SetPlane pipe A, plane 12, disabling (kms_vblank:545) igt_kms-DEBUG: display: SetProp plane A.12 "rotation" to 0x1/1 (kms_vblank:545) igt_kms-DEBUG: display: SetProp plane A.12 "alpha" to 0xffff/65535 (kms_vblank:545) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:545) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 13 (kms_vblank:545) igt_kms-DEBUG: display: SetPlane pipe A, plane 13, disabling (kms_vblank:545) igt_kms-DEBUG: display: SetProp plane A.13 "rotation" to 0x1/1 (kms_vblank:545) igt_kms-DEBUG: display: SetProp plane A.13 "alpha" to 0xffff/65535 (kms_vblank:545) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:545) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 14 (kms_vblank:545) igt_kms-DEBUG: display: SetPlane pipe A, plane 14, disabling (kms_vblank:545) igt_kms-DEBUG: display: SetProp plane A.14 "rotation" to 0x1/1 (kms_vblank:545) igt_kms-DEBUG: display: SetProp plane A.14 "alpha" to 0xffff/65535 (kms_vblank:545) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:545) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 15 (kms_vblank:545) igt_kms-DEBUG: display: SetPlane pipe A, plane 15, disabling (kms_vblank:545) igt_kms-DEBUG: display: SetProp plane A.15 "rotation" to 0x1/1 (kms_vblank:545) igt_kms-DEBUG: display: SetProp plane A.15 "alpha" to 0xffff/65535 (kms_vblank:545) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:545) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 16 (kms_vblank:545) igt_kms-DEBUG: display: SetPlane pipe A, plane 16, disabling (kms_vblank:545) igt_kms-DEBUG: display: SetProp plane A.16 "rotation" to 0x1/1 (kms_vblank:545) igt_kms-DEBUG: display: SetProp plane A.16 "alpha" to 0xffff/65535 (kms_vblank:545) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:545) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 17 (kms_vblank:545) igt_kms-DEBUG: display: SetCursor pipe A, disabling (kms_vblank:545) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0) (kms_vblank:545) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:545) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 0 (kms_vblank:545) igt_kms-DEBUG: display: SetCrtc pipe B, disabling (kms_vblank:545) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:545) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 17 (kms_vblank:545) igt_kms-DEBUG: display: SetCursor pipe B, disabling (kms_vblank:545) igt_kms-DEBUG: display: MoveCursor pipe B, (0, 0) (kms_vblank:545) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:545) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 0 (kms_vblank:545) igt_kms-DEBUG: display: SetCrtc pipe C, disabling (kms_vblank:545) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:545) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 17 (kms_vblank:545) igt_kms-DEBUG: display: SetCursor pipe C, disabling (kms_vblank:545) igt_kms-DEBUG: display: MoveCursor pipe C, (0, 0) (kms_vblank:545) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && pla<14>[ 97.824191] [IGT] kms_vblank: finished subtest pipe-A-Writeback-1, FAIL ne_idx <<14>[ 97.824332] [IGT] kms_vblank: finished subtest wait-idle, FAIL pipe->n<14>[ 97.826162] [IGT] kms_vblank: exiting, ret=98 _planes (kms_vblank:545) igt_kms-DEBUG: display<8>[ 97.845809] : Fixing up initial rotation pipe D, plane 0 (kms_vblank:545) igt_kms-DEBUG: display: SetCrtc pipe D, disabling (kms_vblank:545) igt_kms-DEBUG<14>[ 97.866359] [IGT] kms_vblank: executing : Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:545<14>[ 97.879266] [IGT] kms_vblank: starting subtest wait-idle-hang ) igt_km<14>[ 97.879389] [IGT] kms_vblank: finished subtest wait-idle-hang, SKIP s-DEBUG:<14>[ 97.879525] [IGT] kms_vblank: exiting, ret=77 display<8>[ 97.884230] : Fixing up <14>[ 97.908217] [IGT] kms_vblank: executing initial rotation pipe D, plane 17 (kms_vblank:545) igt_kms-DEBUG: display: SetCursor pipe D, disabling (kms_vblank:545) ig<14>[ 97.921055] [IGT] kms_vblank: starting subtest wait-forked t_kms-DE<14>[ 97.921400] [IGT] kms_vblank: starting dynamic subtest pipe-A-Writeback-1 BUG: display: MoveCursor pipe D, (0, 0) (kms_vblank:545) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:545) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 0 (kms_vblank:545) igt_kms-DEBUG: display: SetCrtc pipe E, disabling (kms_vblank:545) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:545) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 17 (kms_vblank:545) igt_kms-DEBUG: display: SetCursor pipe E, disabling (kms_vblank:545) igt_kms-DEBUG: display: MoveCursor pipe E, (0, 0) (kms_vblank:545) igt_kms-DEBUG: display: } (kms_vblank:545) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:545) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:545) igt_kms-CRITICAL: Last errno: 16, Device or resource busy (kms_vblank:545) igt_core-INFO: Stack trace: (kms_vblank:545) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_vblank:545) igt_core-INFO: #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() (kms_vblank:545) igt_core-INFO: #2 [+0xd6871f94] (kms_vblank:545) igt_core-INFO: #3 [+0xd6872fa0] (kms_vblank:545) igt_core-INFO: #4 [+0xd68731bc] (kms_vblank:545) igt_core-INFO: #5 [+0xd6871c78] (kms_vblank:545) igt_core-INFO: #6 [__libc_init_first+0x80] (kms_vblank:545) igt_core-INFO: #7 [__libc_start_main+0x98] (kms_vblank:545) igt_core-INFO: #8 [+0xd6871cb0] **** END **** [1mDynamic subtest pipe-A-Writeback-1: FAIL (3.736s)[0m [1mSubtest wait-idle: FAIL (3.737s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305795 for randomisation Opened device: /dev/dri/card0 Starting subtest: wait-idle-hang Test requirement not met in function gem_context_require_bannable, file ../lib/i915/gem_context.c:324: Test requirement: has_ban_period || has_bannable Last errno: 22, Invalid argument [1mSubtest wait-idle-hang: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305795 for randomisation Opened device: /dev/dri/card0 Starting subtest: wait-forked Starting dynamic subtest: pipe-A-Writeback-1 (kms_vblank:551) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:551) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:551) igt_kms-CRITICAL: Last errno: 16, Device or resource busy Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() #2 [+0xadaf1f94] #3 [+0xadaf2fa0] #4 [+0xadaf31bc] #5 [+0xadaf1c78] #6 [__libc_init_first+0x80] #7 [__libc_start_main+0x98] #8 [+0xadaf1cb0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** (kms_vblank:551) igt_kms-DEBUG: display: SetProp plane A.4 "rotation" to 0x1/1 (kms_vblank:551) igt_kms-DEBUG: display: SetProp plane A.4 "alpha" to 0xffff/65535 (kms_vblank:551) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:551) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 5 (kms_vblank:551) igt_kms-DEBUG: display: SetPlane pipe A, plane 5, disabling (kms_vblank:551) igt_kms-DEBUG: display: SetProp plane A.5 "rotation" to 0x1/1 (kms_vblank:551) igt_kms-DEBUG: display: SetProp plane A.5 "alpha" to 0xffff/65535 (kms_vblank:551) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:551) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 6 (kms_vblank:551) igt_kms-DEBUG: display: SetPlane pipe A, plane 6, disabling (kms_vblank:551) igt_kms-DEBUG: display: SetProp plane A.6 "rotation" to 0x1/1 (kms_vblank:551) igt_kms-DEBUG: display: SetProp plane A.6 "alpha" to 0xffff/65535 (kms_vblank:551) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:551) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 7 (kms_vblank:551) igt_kms-DEBUG: display: SetPlane pipe A, plane 7, disabling (kms_vblank:551) igt_kms-DEBUG: display: SetProp plane A.7 "rotation" to 0x1/1 (kms_vblank:551) igt_kms-DEBUG: display: SetProp plane A.7 "alpha" to 0xffff/65535 (kms_vblank:551) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:551) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 8 (kms_vblank:551) igt_kms-DEBUG: display: SetPlane pipe A, plane 8, disabling (kms_vblank:551) igt_kms-DEBUG: display: SetProp plane A.8 "rotation" to 0x1/1 (kms_vblank:551) igt_kms-DEBUG: display: SetProp plane A.8 "alpha" to 0xffff/65535 (kms_vblank:551) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:551) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 9 (kms_vblank:551) igt_kms-DEBUG: display: SetPlane pipe A, plane 9, disabling (kms_vblank:551) igt_kms-DEBUG: display: SetProp plane A.9 "rotation" to 0x1/1 (kms_vblank:551) igt_kms-DEBUG: display: SetProp plane A.9 "alpha" to 0xffff/65535 (kms_vblank:551) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:551) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 10 (kms_vblank:551) igt_kms-DEBUG: display: SetPlane pipe A, plane 10, disabling (kms_vblank:551) igt_kms-DEBUG: display: SetProp plane A.10 "rotation" to 0x1/1 (kms_vblank:551) igt_kms-DEBUG: display: SetProp plane A.10 "alpha" to 0xffff/65535 (kms_vblank:551) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:551) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 11 (kms_vblank:551) igt_kms-DEBUG: display: SetPlane pipe A, plane 11, disabling (kms_vblank:551) igt_kms-DEBUG: display: SetProp plane A.11 "rotation" to 0x1/1 (kms_vblank:551) igt_kms-DEBUG: display: SetProp plane A.11 "alpha" to 0xffff/65535 (kms_vblank:551) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:551) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 12 (kms_vblank:551) igt_kms-DEBUG: display: SetPlane pipe A, plane 12, disabling (kms_vblank:551) igt_kms-DEBUG: display: SetProp plane A.12 "rotation" to 0x1/1 (kms_vblank:551) igt_kms-DEBUG: display: SetProp plane A.12 "alpha" to 0xffff/65535 (kms_vblank:551) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:551) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 13 (kms_vblank:551) igt_kms-DEBUG: display: SetPlane pipe A, plane 13, disabling (kms_vblank:551) igt_kms-DEBUG: display: SetProp plane A.13 "rotation" to 0x1/1 (kms_vblank:551) igt_kms-DEBUG: display: SetProp plane A.13 "alpha" to 0xffff/65535 (kms_vblank:551) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:551) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 14 (kms_vblank:551) igt_kms-DEBUG: display: SetPlane pipe A, plane 14, disabling (kms_vblank:551) igt_kms-DEBUG: display: SetProp plane A.14 "rotation" to 0x1/1 (kms_vblank:551) igt_kms-DEBUG: display: SetProp plane A.14 "alpha" to 0xffff/65535 (kms_vblank:551) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:551) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 15 (kms_vblank:551) igt_kms-DEBUG: display: SetPlane pipe A, plane 15, disabling (kms_vblank:551) igt_kms-DEBUG: display: SetProp plane A.15 "rotation" to 0x1/1 (kms_vblank:551) igt_kms-DEBUG: display: SetProp plane A.15 "alpha" to 0xffff/65535 (kms_vblank:551) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:551) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 16 (kms_vblank:551) igt_kms-DEBUG: display: SetPlane pipe A, plane 16, disabling (kms_vblank:551) igt_kms-DEBUG: display: SetProp plane A.16 "rotation" to 0x1/1 (kms_vblank:551) igt_kms-DEBUG: display: SetProp plane A.16 "alpha" to 0xffff/65535 (kms_vblank:551) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:551) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 17 (kms_vblank:551) igt_kms-DEBUG: display: SetCursor pipe A, disabling (kms_vblank:551) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0) (kms_vblank:551) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:551) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 0 (kms_vblank:551) igt_kms-DEBUG: display: SetCrtc pipe B, disabling (kms_vblank:551) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:551) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 17 (kms_vblank:551) igt_kms-DEBUG: display: SetCursor pipe B, disabling (kms_vblank:551) igt_kms-DEBUG: display: MoveCursor pipe B, (0, 0) (kms_vblank:551) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:551) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 0 (kms_vblank:551) igt_kms-DEBUG: display: SetCrtc pipe C, disabling (kms_vblank:551) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:551) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 17 (kms_vblank:551) igt_kms-DEBUG: display: SetCursor pipe C, disabling (kms_vblank:551) igt_kms-DEBUG: display: MoveCursor pipe C, (0, 0) (kms_vblank:551) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && pla<14>[ 101.664330] [IGT] kms_vblank: finished subtest pipe-A-Writeback-1, FAIL ne_idx <<14>[ 101.664476] [IGT] kms_vblank: finished subtest wait-forked, FAIL pipe->n<14>[ 101.666232] [IGT] kms_vblank: exiting, ret=98 _planes (kms_vblank:551) igt_kms-DEBUG: display<8>[ 101.686293] : Fixing up initial rotation pipe D, plane 0 (kms_vblank:551) igt_kms-DEBUG: display: SetCrtc pipe D, disabling (kms_vblank:551) igt_kms-DEBUG<14>[ 101.706531] [IGT] kms_vblank: executing : Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:551<14>[ 101.719416] [IGT] kms_vblank: starting subtest wait-forked-hang ) igt_km<14>[ 101.719545] [IGT] kms_vblank: finished subtest wait-forked-hang, SKIP s-DEBUG:<14>[ 101.719675] [IGT] kms_vblank: exiting, ret=77 display<8>[ 101.724183] : Fixing up initial rotation pipe D, plane 1<14>[ 101.749171] [IGT] kms_vblank: executing 7 (kms_vblank:551) igt_kms-DEBUG: display: SetCursor pipe D, disabling (kms_vblank<14>[ 101.761945] [IGT] kms_vblank: starting subtest wait-busy :551) ig<14>[ 101.762294] [IGT] kms_vblank: starting dynamic subtest pipe-A-Writeback-1 t_kms-DEBUG: display: MoveCursor pipe D, (0, 0) (kms_vblank:551) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:551) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 0 (kms_vblank:551) igt_kms-DEBUG: display: SetCrtc pipe E, disabling (kms_vblank:551) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:551) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 17 (kms_vblank:551) igt_kms-DEBUG: display: SetCursor pipe E, disabling (kms_vblank:551) igt_kms-DEBUG: display: MoveCursor pipe E, (0, 0) (kms_vblank:551) igt_kms-DEBUG: display: } (kms_vblank:551) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:551) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:551) igt_kms-CRITICAL: Last errno: 16, Device or resource busy (kms_vblank:551) igt_core-INFO: Stack trace: (kms_vblank:551) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_vblank:551) igt_core-INFO: #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() (kms_vblank:551) igt_core-INFO: #2 [+0xadaf1f94] (kms_vblank:551) igt_core-INFO: #3 [+0xadaf2fa0] (kms_vblank:551) igt_core-INFO: #4 [+0xadaf31bc] (kms_vblank:551) igt_core-INFO: #5 [+0xadaf1c78] (kms_vblank:551) igt_core-INFO: #6 [__libc_init_first+0x80] (kms_vblank:551) igt_core-INFO: #7 [__libc_start_main+0x98] (kms_vblank:551) igt_core-INFO: #8 [+0xadaf1cb0] **** END **** [1mDynamic subtest pipe-A-Writeback-1: FAIL (3.743s)[0m [1mSubtest wait-forked: FAIL (3.743s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305799 for randomisation Opened device: /dev/dri/card0 Starting subtest: wait-forked-hang Test requirement not met in function gem_context_require_bannable, file ../lib/i915/gem_context.c:324: Test requirement: has_ban_period || has_bannable Last errno: 22, Invalid argument [1mSubtest wait-forked-hang: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305799 for randomisation Opened device: /dev/dri/card0 Starting subtest: wait-busy Starting dynamic subtest: pipe-A-Writeback-1 (kms_vblank:557) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:557) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:557) igt_kms-CRITICAL: Last errno: 16, Device or resource busy Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() #2 [+0xe2a51f94] #3 [+0xe2a52fa0] #4 [+0xe2a531bc] #5 [+0xe2a51c78] #6 [__libc_init_first+0x80] #7 [__libc_start_main+0x98] #8 [+0xe2a51cb0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** (kms_vblank:557) igt_kms-DEBUG: display: SetProp plane A.4 "rotation" to 0x1/1 (kms_vblank:557) igt_kms-DEBUG: display: SetProp plane A.4 "alpha" to 0xffff/65535 (kms_vblank:557) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:557) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 5 (kms_vblank:557) igt_kms-DEBUG: display: SetPlane pipe A, plane 5, disabling (kms_vblank:557) igt_kms-DEBUG: display: SetProp plane A.5 "rotation" to 0x1/1 (kms_vblank:557) igt_kms-DEBUG: display: SetProp plane A.5 "alpha" to 0xffff/65535 (kms_vblank:557) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:557) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 6 (kms_vblank:557) igt_kms-DEBUG: display: SetPlane pipe A, plane 6, disabling (kms_vblank:557) igt_kms-DEBUG: display: SetProp plane A.6 "rotation" to 0x1/1 (kms_vblank:557) igt_kms-DEBUG: display: SetProp plane A.6 "alpha" to 0xffff/65535 (kms_vblank:557) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:557) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 7 (kms_vblank:557) igt_kms-DEBUG: display: SetPlane pipe A, plane 7, disabling (kms_vblank:557) igt_kms-DEBUG: display: SetProp plane A.7 "rotation" to 0x1/1 (kms_vblank:557) igt_kms-DEBUG: display: SetProp plane A.7 "alpha" to 0xffff/65535 (kms_vblank:557) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:557) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 8 (kms_vblank:557) igt_kms-DEBUG: display: SetPlane pipe A, plane 8, disabling (kms_vblank:557) igt_kms-DEBUG: display: SetProp plane A.8 "rotation" to 0x1/1 (kms_vblank:557) igt_kms-DEBUG: display: SetProp plane A.8 "alpha" to 0xffff/65535 (kms_vblank:557) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:557) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 9 (kms_vblank:557) igt_kms-DEBUG: display: SetPlane pipe A, plane 9, disabling (kms_vblank:557) igt_kms-DEBUG: display: SetProp plane A.9 "rotation" to 0x1/1 (kms_vblank:557) igt_kms-DEBUG: display: SetProp plane A.9 "alpha" to 0xffff/65535 (kms_vblank:557) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:557) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 10 (kms_vblank:557) igt_kms-DEBUG: display: SetPlane pipe A, plane 10, disabling (kms_vblank:557) igt_kms-DEBUG: display: SetProp plane A.10 "rotation" to 0x1/1 (kms_vblank:557) igt_kms-DEBUG: display: SetProp plane A.10 "alpha" to 0xffff/65535 (kms_vblank:557) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:557) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 11 (kms_vblank:557) igt_kms-DEBUG: display: SetPlane pipe A, plane 11, disabling (kms_vblank:557) igt_kms-DEBUG: display: SetProp plane A.11 "rotation" to 0x1/1 (kms_vblank:557) igt_kms-DEBUG: display: SetProp plane A.11 "alpha" to 0xffff/65535 (kms_vblank:557) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:557) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 12 (kms_vblank:557) igt_kms-DEBUG: display: SetPlane pipe A, plane 12, disabling (kms_vblank:557) igt_kms-DEBUG: display: SetProp plane A.12 "rotation" to 0x1/1 (kms_vblank:557) igt_kms-DEBUG: display: SetProp plane A.12 "alpha" to 0xffff/65535 (kms_vblank:557) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:557) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 13 (kms_vblank:557) igt_kms-DEBUG: display: SetPlane pipe A, plane 13, disabling (kms_vblank:557) igt_kms-DEBUG: display: SetProp plane A.13 "rotation" to 0x1/1 (kms_vblank:557) igt_kms-DEBUG: display: SetProp plane A.13 "alpha" to 0xffff/65535 (kms_vblank:557) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:557) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 14 (kms_vblank:557) igt_kms-DEBUG: display: SetPlane pipe A, plane 14, disabling (kms_vblank:557) igt_kms-DEBUG: display: SetProp plane A.14 "rotation" to 0x1/1 (kms_vblank:557) igt_kms-DEBUG: display: SetProp plane A.14 "alpha" to 0xffff/65535 (kms_vblank:557) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:557) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 15 (kms_vblank:557) igt_kms-DEBUG: display: SetPlane pipe A, plane 15, disabling (kms_vblank:557) igt_kms-DEBUG: display: SetProp plane A.15 "rotation" to 0x1/1 (kms_vblank:557) igt_kms-DEBUG: display: SetProp plane A.15 "alpha" to 0xffff/65535 (kms_vblank:557) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:557) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 16 (kms_vblank:557) igt_kms-DEBUG: display: SetPlane pipe A, plane 16, disabling (kms_vblank:557) igt_kms-DEBUG: display: SetProp plane A.16 "rotation" to 0x1/1 (kms_vblank:557) igt_kms-DEBUG: display: SetProp plane A.16 "alpha" to 0xffff/65535 (kms_vblank:557) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:557) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 17 (kms_vblank:557) igt_kms-DEBUG: display: SetCursor pipe A, disabling (kms_vblank:557) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0) (kms_vblank:557) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:557) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 0 (kms_vblank:557) igt_kms-DEBUG: display: SetCrtc pipe B, disabling (kms_vblank:557) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:557) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 17 (kms_vblank:557) igt_kms-DEBUG: display: SetCursor pipe B, disabling (kms_vblank:557) igt_kms-DEBUG: display: MoveCursor pipe B, (0, 0) (kms_vblank:557) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:557) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 0 (kms_vblank:557) igt_kms-DEBUG: display: SetCrtc pipe C, disabling (kms_vblank:557) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:557) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 17 (kms_vblank:557) igt_kms-DEBUG: display: SetCursor pipe C, disabling (kms_vblank:557) igt_kms-DEBUG: display: MoveCursor pipe C, (0, 0) (kms_vblank:557) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:557) igt_km<14>[ 105.505007] [IGT] kms_vblank: finished subtest pipe-A-Writeback-1, FAIL s-DEBUG:<14>[ 105.505150] [IGT] kms_vblank: finished subtest wait-busy, FAIL display<14>[ 105.506899] [IGT] kms_vblank: exiting, ret=98 : Fi<8>[ 105.513513] xing up <14>[ 105.536617] [IGT] kms_vblank: executing initial rotation pipe D, plane 0 (kms_vblank:557) igt_kms-DEBUG: display: SetCrtc pipe D, disabling (kms_vblank:557) igt_kms-DEBUG: Test requirement passed: plane<14>[ 105.554115] [IGT] kms_vblank: starting subtest wait-busy-hang _idx >= <14>[ 105.554238] [IGT] kms_vblank: finished subtest wait-busy-hang, SKIP 0 && pla<14>[ 105.554380] [IGT] kms_vblank: exiting, ret=77 ne_idx <<8>[ 105.559385] pipe->n<14>[ 105.575447] [IGT] kms_vblank: executing _planes (kms_vblank:557) igt_kms-DEBUG: display: Fixing up initial rotation pipe D, plane 17 (kms_vblank:557) igt_kms-DEBUG: display: SetCurso<14>[ 105.600665] [IGT] kms_vblank: starting subtest wait-forked-busy r pipe D<14>[ 105.601017] [IGT] kms_vblank: starting dynamic subtest pipe-A-Writeback-1 , disabling (kms_vblank:557) igt_kms-DEBUG: display: MoveCursor pipe D, (0, 0) (kms_vblank:557) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:557) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 0 (kms_vblank:557) igt_kms-DEBUG: display: SetCrtc pipe E, disabling (kms_vblank:557) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:557) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 17 (kms_vblank:557) igt_kms-DEBUG: display: SetCursor pipe E, disabling (kms_vblank:557) igt_kms-DEBUG: display: MoveCursor pipe E, (0, 0) (kms_vblank:557) igt_kms-DEBUG: display: } (kms_vblank:557) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:557) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:557) igt_kms-CRITICAL: Last errno: 16, Device or resource busy (kms_vblank:557) igt_core-INFO: Stack trace: (kms_vblank:557) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_vblank:557) igt_core-INFO: #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() (kms_vblank:557) igt_core-INFO: #2 [+0xe2a51f94] (kms_vblank:557) igt_core-INFO: #3 [+0xe2a52fa0] (kms_vblank:557) igt_core-INFO: #4 [+0xe2a531bc] (kms_vblank:557) igt_core-INFO: #5 [+0xe2a51c78] (kms_vblank:557) igt_core-INFO: #6 [__libc_init_first+0x80] (kms_vblank:557) igt_core-INFO: #7 [__libc_start_main+0x98] (kms_vblank:557) igt_core-INFO: #8 [+0xe2a51cb0] **** END **** [1mDynamic subtest pipe-A-Writeback-1: FAIL (3.743s)[0m [1mSubtest wait-busy: FAIL (3.743s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305803 for randomisation Opened device: /dev/dri/card0 Starting subtest: wait-busy-hang Test requirement not met in function gem_context_require_bannable, file ../lib/i915/gem_context.c:324: Test requirement: has_ban_period || has_bannable Last errno: 22, Invalid argument [1mSubtest wait-busy-hang: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305803 for randomisation Opened device: /dev/dri/card0 Starting subtest: wait-forked-busy Starting dynamic subtest: pipe-A-Writeback-1 (kms_vblank:563) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:563) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:563) igt_kms-CRITICAL: Last errno: 16, Device or resource busy Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() #2 [+0xae0e1f94] #3 [+0xae0e2fa0] #4 [+0xae0e31bc] #5 [+0xae0e1c78] #6 [__libc_init_first+0x80] #7 [__libc_start_main+0x98] #8 [+0xae0e1cb0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** (kms_vblank:563) igt_kms-DEBUG: display: SetProp plane A.4 "rotation" to 0x1/1 (kms_vblank:563) igt_kms-DEBUG: display: SetProp plane A.4 "alpha" to 0xffff/65535 (kms_vblank:563) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:563) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 5 (kms_vblank:563) igt_kms-DEBUG: display: SetPlane pipe A, plane 5, disabling (kms_vblank:563) igt_kms-DEBUG: display: SetProp plane A.5 "rotation" to 0x1/1 (kms_vblank:563) igt_kms-DEBUG: display: SetProp plane A.5 "alpha" to 0xffff/65535 (kms_vblank:563) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:563) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 6 (kms_vblank:563) igt_kms-DEBUG: display: SetPlane pipe A, plane 6, disabling (kms_vblank:563) igt_kms-DEBUG: display: SetProp plane A.6 "rotation" to 0x1/1 (kms_vblank:563) igt_kms-DEBUG: display: SetProp plane A.6 "alpha" to 0xffff/65535 (kms_vblank:563) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:563) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 7 (kms_vblank:563) igt_kms-DEBUG: display: SetPlane pipe A, plane 7, disabling (kms_vblank:563) igt_kms-DEBUG: display: SetProp plane A.7 "rotation" to 0x1/1 (kms_vblank:563) igt_kms-DEBUG: display: SetProp plane A.7 "alpha" to 0xffff/65535 (kms_vblank:563) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:563) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 8 (kms_vblank:563) igt_kms-DEBUG: display: SetPlane pipe A, plane 8, disabling (kms_vblank:563) igt_kms-DEBUG: display: SetProp plane A.8 "rotation" to 0x1/1 (kms_vblank:563) igt_kms-DEBUG: display: SetProp plane A.8 "alpha" to 0xffff/65535 (kms_vblank:563) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:563) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 9 (kms_vblank:563) igt_kms-DEBUG: display: SetPlane pipe A, plane 9, disabling (kms_vblank:563) igt_kms-DEBUG: display: SetProp plane A.9 "rotation" to 0x1/1 (kms_vblank:563) igt_kms-DEBUG: display: SetProp plane A.9 "alpha" to 0xffff/65535 (kms_vblank:563) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:563) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 10 (kms_vblank:563) igt_kms-DEBUG: display: SetPlane pipe A, plane 10, disabling (kms_vblank:563) igt_kms-DEBUG: display: SetProp plane A.10 "rotation" to 0x1/1 (kms_vblank:563) igt_kms-DEBUG: display: SetProp plane A.10 "alpha" to 0xffff/65535 (kms_vblank:563) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:563) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 11 (kms_vblank:563) igt_kms-DEBUG: display: SetPlane pipe A, plane 11, disabling (kms_vblank:563) igt_kms-DEBUG: display: SetProp plane A.11 "rotation" to 0x1/1 (kms_vblank:563) igt_kms-DEBUG: display: SetProp plane A.11 "alpha" to 0xffff/65535 (kms_vblank:563) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:563) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 12 (kms_vblank:563) igt_kms-DEBUG: display: SetPlane pipe A, plane 12, disabling (kms_vblank:563) igt_kms-DEBUG: display: SetProp plane A.12 "rotation" to 0x1/1 (kms_vblank:563) igt_kms-DEBUG: display: SetProp plane A.12 "alpha" to 0xffff/65535 (kms_vblank:563) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:563) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 13 (kms_vblank:563) igt_kms-DEBUG: display: SetPlane pipe A, plane 13, disabling (kms_vblank:563) igt_kms-DEBUG: display: SetProp plane A.13 "rotation" to 0x1/1 (kms_vblank:563) igt_kms-DEBUG: display: SetProp plane A.13 "alpha" to 0xffff/65535 (kms_vblank:563) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:563) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 14 (kms_vblank:563) igt_kms-DEBUG: display: SetPlane pipe A, plane 14, disabling (kms_vblank:563) igt_kms-DEBUG: display: SetProp plane A.14 "rotation" to 0x1/1 (kms_vblank:563) igt_kms-DEBUG: display: SetProp plane A.14 "alpha" to 0xffff/65535 (kms_vblank:563) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:563) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 15 (kms_vblank:563) igt_kms-DEBUG: display: SetPlane pipe A, plane 15, disabling (kms_vblank:563) igt_kms-DEBUG: display: SetProp plane A.15 "rotation" to 0x1/1 (kms_vblank:563) igt_kms-DEBUG: display: SetProp plane A.15 "alpha" to 0xffff/65535 (kms_vblank:563) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:563) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 16 (kms_vblank:563) igt_kms-DEBUG: display: SetPlane pipe A, plane 16, disabling (kms_vblank:563) igt_kms-DEBUG: display: SetProp plane A.16 "rotation" to 0x1/1 (kms_vblank:563) igt_kms-DEBUG: display: SetProp plane A.16 "alpha" to 0xffff/65535 (kms_vblank:563) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:563) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 17 (kms_vblank:563) igt_kms-DEBUG: display: SetCursor pipe A, disabling (kms_vblank:563) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0) (kms_vblank:563) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:563) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 0 (kms_vblank:563) igt_kms-DEBUG: display: SetCrtc pipe B, disabling (kms_vblank:563) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:563) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 17 (kms_vblank:563) igt_kms-DEBUG: display: SetCursor pipe B, disabling (kms_vblank:563) igt_kms-DEBUG: display: MoveCursor pipe B, (0, 0) (kms_vblank:563) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:563) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 0 (kms_vblank:563) igt_kms-DEBUG: display: SetCrtc pipe C, disabling (kms_vblank:563) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:563) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 17 (kms_vblank:563) igt_kms-DEBUG: display: SetCursor pipe C, disabling (kms_vblank:563) igt_kms-DEBUG: display: MoveCursor pipe C, (0, 0) (kms_vblank:563) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && pla<14>[ 109.343501] [IGT] kms_vblank: finished subtest pipe-A-Writeback-1, FAIL ne_idx <<14>[ 109.343647] [IGT] kms_vblank: finished subtest wait-forked-busy, FAIL pipe->n<14>[ 109.345482] [IGT] kms_vblank: exiting, ret=98 _planes (kms_vblank:563) igt_kms-DEBUG: display<8>[ 109.366243] : Fixing up initial rotation pipe D, plane 0 (kms_vblank:563) igt_kms-DEBUG: display: S<14>[ 109.384555] [IGT] kms_vblank: executing etCrtc pipe D, disabling (kms_vblank:563) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:563) igt_kms-DEBUG: display<14>[ 109.402264] [IGT] kms_vblank: starting subtest wait-forked-busy-hang : Fi<14>[ 109.402384] [IGT] kms_vblank: finished subtest wait-forked-busy-hang, SKIP xing up <14>[ 109.402518] [IGT] kms_vblank: exiting, ret=77 initial <8>[ 109.407339] <14>[ 109.424900] [IGT] kms_vblank: executing rotation pipe D, plane 17 (kms_vblank:563) igt_kms-DEBUG: display: SetCursor pipe D, disabling (kms_vblank:563) igt_kms-DEBUG: display: MoveCursor pipe D, (0, 0) (km<14>[ 109.449887] [IGT] kms_vblank: starting subtest ts-continuation-idle s_vblank<14>[ 109.450228] [IGT] kms_vblank: starting dynamic subtest pipe-A-Writeback-1 :563) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:563) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 0 (kms_vblank:563) igt_kms-DEBUG: display: SetCrtc pipe E, disabling (kms_vblank:563) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:563) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 17 (kms_vblank:563) igt_kms-DEBUG: display: SetCursor pipe E, disabling (kms_vblank:563) igt_kms-DEBUG: display: MoveCursor pipe E, (0, 0) (kms_vblank:563) igt_kms-DEBUG: display: } (kms_vblank:563) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:563) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:563) igt_kms-CRITICAL: Last errno: 16, Device or resource busy (kms_vblank:563) igt_core-INFO: Stack trace: (kms_vblank:563) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_vblank:563) igt_core-INFO: #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() (kms_vblank:563) igt_core-INFO: #2 [+0xae0e1f94] (kms_vblank:563) igt_core-INFO: #3 [+0xae0e2fa0] (kms_vblank:563) igt_core-INFO: #4 [+0xae0e31bc] (kms_vblank:563) igt_core-INFO: #5 [+0xae0e1c78] (kms_vblank:563) igt_core-INFO: #6 [__libc_init_first+0x80] (kms_vblank:563) igt_core-INFO: #7 [__libc_start_main+0x98] (kms_vblank:563) igt_core-INFO: #8 [+0xae0e1cb0] **** END **** [1mDynamic subtest pipe-A-Writeback-1: FAIL (3.728s)[0m [1mSubtest wait-forked-busy: FAIL (3.743s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305807 for randomisation Opened device: /dev/dri/card0 Starting subtest: wait-forked-busy-hang Test requirement not met in function gem_context_require_bannable, file ../lib/i915/gem_context.c:324: Test requirement: has_ban_period || has_bannable Last errno: 22, Invalid argument [1mSubtest wait-forked-busy-hang: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305807 for randomisation Opened device: /dev/dri/card0 Starting subtest: ts-continuation-idle Starting dynamic subtest: pipe-A-Writeback-1 (kms_vblank:569) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:569) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:569) igt_kms-CRITICAL: Last errno: 16, Device or resource busy Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() #2 [+0xd51b1f94] #3 [+0xd51b2fa0] #4 [+0xd51b31bc] #5 [+0xd51b1c78] #6 [__libc_init_first+0x80] #7 [__libc_start_main+0x98] #8 [+0xd51b1cb0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** (kms_vblank:569) igt_kms-DEBUG: display: SetProp plane A.4 "rotation" to 0x1/1 (kms_vblank:569) igt_kms-DEBUG: display: SetProp plane A.4 "alpha" to 0xffff/65535 (kms_vblank:569) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:569) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 5 (kms_vblank:569) igt_kms-DEBUG: display: SetPlane pipe A, plane 5, disabling (kms_vblank:569) igt_kms-DEBUG: display: SetProp plane A.5 "rotation" to 0x1/1 (kms_vblank:569) igt_kms-DEBUG: display: SetProp plane A.5 "alpha" to 0xffff/65535 (kms_vblank:569) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:569) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 6 (kms_vblank:569) igt_kms-DEBUG: display: SetPlane pipe A, plane 6, disabling (kms_vblank:569) igt_kms-DEBUG: display: SetProp plane A.6 "rotation" to 0x1/1 (kms_vblank:569) igt_kms-DEBUG: display: SetProp plane A.6 "alpha" to 0xffff/65535 (kms_vblank:569) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:569) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 7 (kms_vblank:569) igt_kms-DEBUG: display: SetPlane pipe A, plane 7, disabling (kms_vblank:569) igt_kms-DEBUG: display: SetProp plane A.7 "rotation" to 0x1/1 (kms_vblank:569) igt_kms-DEBUG: display: SetProp plane A.7 "alpha" to 0xffff/65535 (kms_vblank:569) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:569) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 8 (kms_vblank:569) igt_kms-DEBUG: display: SetPlane pipe A, plane 8, disabling (kms_vblank:569) igt_kms-DEBUG: display: SetProp plane A.8 "rotation" to 0x1/1 (kms_vblank:569) igt_kms-DEBUG: display: SetProp plane A.8 "alpha" to 0xffff/65535 (kms_vblank:569) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:569) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 9 (kms_vblank:569) igt_kms-DEBUG: display: SetPlane pipe A, plane 9, disabling (kms_vblank:569) igt_kms-DEBUG: display: SetProp plane A.9 "rotation" to 0x1/1 (kms_vblank:569) igt_kms-DEBUG: display: SetProp plane A.9 "alpha" to 0xffff/65535 (kms_vblank:569) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:569) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 10 (kms_vblank:569) igt_kms-DEBUG: display: SetPlane pipe A, plane 10, disabling (kms_vblank:569) igt_kms-DEBUG: display: SetProp plane A.10 "rotation" to 0x1/1 (kms_vblank:569) igt_kms-DEBUG: display: SetProp plane A.10 "alpha" to 0xffff/65535 (kms_vblank:569) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:569) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 11 (kms_vblank:569) igt_kms-DEBUG: display: SetPlane pipe A, plane 11, disabling (kms_vblank:569) igt_kms-DEBUG: display: SetProp plane A.11 "rotation" to 0x1/1 (kms_vblank:569) igt_kms-DEBUG: display: SetProp plane A.11 "alpha" to 0xffff/65535 (kms_vblank:569) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:569) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 12 (kms_vblank:569) igt_kms-DEBUG: display: SetPlane pipe A, plane 12, disabling (kms_vblank:569) igt_kms-DEBUG: display: SetProp plane A.12 "rotation" to 0x1/1 (kms_vblank:569) igt_kms-DEBUG: display: SetProp plane A.12 "alpha" to 0xffff/65535 (kms_vblank:569) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:569) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 13 (kms_vblank:569) igt_kms-DEBUG: display: SetPlane pipe A, plane 13, disabling (kms_vblank:569) igt_kms-DEBUG: display: SetProp plane A.13 "rotation" to 0x1/1 (kms_vblank:569) igt_kms-DEBUG: display: SetProp plane A.13 "alpha" to 0xffff/65535 (kms_vblank:569) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:569) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 14 (kms_vblank:569) igt_kms-DEBUG: display: SetPlane pipe A, plane 14, disabling (kms_vblank:569) igt_kms-DEBUG: display: SetProp plane A.14 "rotation" to 0x1/1 (kms_vblank:569) igt_kms-DEBUG: display: SetProp plane A.14 "alpha" to 0xffff/65535 (kms_vblank:569) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:569) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 15 (kms_vblank:569) igt_kms-DEBUG: display: SetPlane pipe A, plane 15, disabling (kms_vblank:569) igt_kms-DEBUG: display: SetProp plane A.15 "rotation" to 0x1/1 (kms_vblank:569) igt_kms-DEBUG: display: SetProp plane A.15 "alpha" to 0xffff/65535 (kms_vblank:569) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:569) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 16 (kms_vblank:569) igt_kms-DEBUG: display: SetPlane pipe A, plane 16, disabling (kms_vblank:569) igt_kms-DEBUG: display: SetProp plane A.16 "rotation" to 0x1/1 (kms_vblank:569) igt_kms-DEBUG: display: SetProp plane A.16 "alpha" to 0xffff/65535 (kms_vblank:569) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:569) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 17 (kms_vblank:569) igt_kms-DEBUG: display: SetCursor pipe A, disabling (kms_vblank:569) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0) (kms_vblank:569) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:569) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 0 (kms_vblank:569) igt_kms-DEBUG: display: SetCrtc pipe B, disabling (kms_vblank:569) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:569) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 17 (kms_vblank:569) igt_kms-DEBUG: display: SetCursor pipe B, disabling (kms_vblank:569) igt_kms-DEBUG: display: MoveCursor pipe B, (0, 0) (kms_vblank:569) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:569) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 0 (kms_vblank:569) igt_kms-DEBUG: display: SetCrtc pipe C, disabling (kms_vblank:569) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:569) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 17 (kms_vblank:569) igt_kms-DEBUG: display: SetCursor pipe C, disabling (kms_vblank:569) igt_kms-DEBUG: display: MoveCursor pipe C, (0, 0) (kms_vblank:569) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && pla<14>[ 113.184285] [IGT] kms_vblank: finished subtest pipe-A-Writeback-1, FAIL ne_idx <<14>[ 113.184430] [IGT] kms_vblank: finished subtest ts-continuation-idle, FAIL pipe->n<14>[ 113.186241] [IGT] kms_vblank: exiting, ret=98 _planes (kms_vblank:569) igt_kms-DEBUG:<8>[ 113.206599] display: Fixing up initial rotation pipe D, plane 0 (kms_vblank:569) igt_kms-DEBUG: display: SetCrtc pipe D, disabling (kms_v<14>[ 113.225778] [IGT] kms_vblank: executing blank:569) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n<14>[ 113.238706] [IGT] kms_vblank: starting subtest ts-continuation-idle-hang _planes <14>[ 113.238832] [IGT] kms_vblank: finished subtest ts-continuation-idle-hang, SKIP (kms_vb<14>[ 113.238981] [IGT] kms_vblank: exiting, ret=77 lank:569<8>[ 113.243618] ) igt_km<14>[ 113.262163] [IGT] kms_vblank: executing s-DEBUG: display: Fixing up initial rotation pipe D, plane 17 (kms_vblank:569) igt_kms-DEBUG: display: SetCursor pipe D, disabling (kms_vblank<14>[ 113.288174] [IGT] kms_vblank: starting subtest ts-continuation-dpms-rpm :569) ig<14>[ 113.288495] [IGT] kms_vblank: starting dynamic subtest pipe-A-Writeback-1 t_kms-DEBUG: display: MoveCursor pipe D, (0, 0) (kms_vblank:569) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:569) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 0 (kms_vblank:569) igt_kms-DEBUG: display: SetCrtc pipe E, disabling (kms_vblank:569) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:569) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 17 (kms_vblank:569) igt_kms-DEBUG: display: SetCursor pipe E, disabling (kms_vblank:569) igt_kms-DEBUG: display: MoveCursor pipe E, (0, 0) (kms_vblank:569) igt_kms-DEBUG: display: } (kms_vblank:569) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:569) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:569) igt_kms-CRITICAL: Last errno: 16, Device or resource busy (kms_vblank:569) igt_core-INFO: Stack trace: (kms_vblank:569) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_vblank:569) igt_core-INFO: #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() (kms_vblank:569) igt_core-INFO: #2 [+0xd51b1f94] (kms_vblank:569) igt_core-INFO: #3 [+0xd51b2fa0] (kms_vblank:569) igt_core-INFO: #4 [+0xd51b31bc] (kms_vblank:569) igt_core-INFO: #5 [+0xd51b1c78] (kms_vblank:569) igt_core-INFO: #6 [__libc_init_first+0x80] (kms_vblank:569) igt_core-INFO: #7 [__libc_start_main+0x98] (kms_vblank:569) igt_core-INFO: #8 [+0xd51b1cb0] **** END **** [1mDynamic subtest pipe-A-Writeback-1: FAIL (3.734s)[0m [1mSubtest ts-continuation-idle: FAIL (3.734s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305811 for randomisation Opened device: /dev/dri/card0 Starting subtest: ts-continuation-idle-hang Test requirement not met in function gem_context_require_bannable, file ../lib/i915/gem_context.c:324: Test requirement: has_ban_period || has_bannable Last errno: 22, Invalid argument [1mSubtest ts-continuation-idle-hang: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305811 for randomisation Opened device: /dev/dri/card0 Starting subtest: ts-continuation-dpms-rpm Starting dynamic subtest: pipe-A-Writeback-1 (kms_vblank:575) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:575) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:575) igt_kms-CRITICAL: Last errno: 16, Device or resource busy Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() #2 [+0xc1b71f94] #3 [+0xc1b72fa0] #4 [+0xc1b731bc] #5 [+0xc1b71c78] #6 [__libc_init_first+0x80] #7 [__libc_start_main+0x98] #8 [+0xc1b71cb0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** (kms_vblank:575) igt_kms-DEBUG: display: SetProp plane A.4 "rotation" to 0x1/1 (kms_vblank:575) igt_kms-DEBUG: display: SetProp plane A.4 "alpha" to 0xffff/65535 (kms_vblank:575) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:575) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 5 (kms_vblank:575) igt_kms-DEBUG: display: SetPlane pipe A, plane 5, disabling (kms_vblank:575) igt_kms-DEBUG: display: SetProp plane A.5 "rotation" to 0x1/1 (kms_vblank:575) igt_kms-DEBUG: display: SetProp plane A.5 "alpha" to 0xffff/65535 (kms_vblank:575) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:575) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 6 (kms_vblank:575) igt_kms-DEBUG: display: SetPlane pipe A, plane 6, disabling (kms_vblank:575) igt_kms-DEBUG: display: SetProp plane A.6 "rotation" to 0x1/1 (kms_vblank:575) igt_kms-DEBUG: display: SetProp plane A.6 "alpha" to 0xffff/65535 (kms_vblank:575) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:575) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 7 (kms_vblank:575) igt_kms-DEBUG: display: SetPlane pipe A, plane 7, disabling (kms_vblank:575) igt_kms-DEBUG: display: SetProp plane A.7 "rotation" to 0x1/1 (kms_vblank:575) igt_kms-DEBUG: display: SetProp plane A.7 "alpha" to 0xffff/65535 (kms_vblank:575) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:575) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 8 (kms_vblank:575) igt_kms-DEBUG: display: SetPlane pipe A, plane 8, disabling (kms_vblank:575) igt_kms-DEBUG: display: SetProp plane A.8 "rotation" to 0x1/1 (kms_vblank:575) igt_kms-DEBUG: display: SetProp plane A.8 "alpha" to 0xffff/65535 (kms_vblank:575) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:575) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 9 (kms_vblank:575) igt_kms-DEBUG: display: SetPlane pipe A, plane 9, disabling (kms_vblank:575) igt_kms-DEBUG: display: SetProp plane A.9 "rotation" to 0x1/1 (kms_vblank:575) igt_kms-DEBUG: display: SetProp plane A.9 "alpha" to 0xffff/65535 (kms_vblank:575) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:575) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 10 (kms_vblank:575) igt_kms-DEBUG: display: SetPlane pipe A, plane 10, disabling (kms_vblank:575) igt_kms-DEBUG: display: SetProp plane A.10 "rotation" to 0x1/1 (kms_vblank:575) igt_kms-DEBUG: display: SetProp plane A.10 "alpha" to 0xffff/65535 (kms_vblank:575) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:575) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 11 (kms_vblank:575) igt_kms-DEBUG: display: SetPlane pipe A, plane 11, disabling (kms_vblank:575) igt_kms-DEBUG: display: SetProp plane A.11 "rotation" to 0x1/1 (kms_vblank:575) igt_kms-DEBUG: display: SetProp plane A.11 "alpha" to 0xffff/65535 (kms_vblank:575) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:575) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 12 (kms_vblank:575) igt_kms-DEBUG: display: SetPlane pipe A, plane 12, disabling (kms_vblank:575) igt_kms-DEBUG: display: SetProp plane A.12 "rotation" to 0x1/1 (kms_vblank:575) igt_kms-DEBUG: display: SetProp plane A.12 "alpha" to 0xffff/65535 (kms_vblank:575) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:575) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 13 (kms_vblank:575) igt_kms-DEBUG: display: SetPlane pipe A, plane 13, disabling (kms_vblank:575) igt_kms-DEBUG: display: SetProp plane A.13 "rotation" to 0x1/1 (kms_vblank:575) igt_kms-DEBUG: display: SetProp plane A.13 "alpha" to 0xffff/65535 (kms_vblank:575) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:575) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 14 (kms_vblank:575) igt_kms-DEBUG: display: SetPlane pipe A, plane 14, disabling (kms_vblank:575) igt_kms-DEBUG: display: SetProp plane A.14 "rotation" to 0x1/1 (kms_vblank:575) igt_kms-DEBUG: display: SetProp plane A.14 "alpha" to 0xffff/65535 (kms_vblank:575) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:575) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 15 (kms_vblank:575) igt_kms-DEBUG: display: SetPlane pipe A, plane 15, disabling (kms_vblank:575) igt_kms-DEBUG: display: SetProp plane A.15 "rotation" to 0x1/1 (kms_vblank:575) igt_kms-DEBUG: display: SetProp plane A.15 "alpha" to 0xffff/65535 (kms_vblank:575) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:575) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 16 (kms_vblank:575) igt_kms-DEBUG: display: SetPlane pipe A, plane 16, disabling (kms_vblank:575) igt_kms-DEBUG: display: SetProp plane A.16 "rotation" to 0x1/1 (kms_vblank:575) igt_kms-DEBUG: display: SetProp plane A.16 "alpha" to 0xffff/65535 (kms_vblank:575) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:575) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 17 (kms_vblank:575) igt_kms-DEBUG: display: SetCursor pipe A, disabling (kms_vblank:575) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0) (kms_vblank:575) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:575) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 0 (kms_vblank:575) igt_kms-DEBUG: display: SetCrtc pipe B, disabling (kms_vblank:575) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:575) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 17 (kms_vblank:575) igt_kms-DEBUG: display: SetCursor pipe B, disabling (kms_vblank:575) igt_kms-DEBUG: display: MoveCursor pipe B, (0, 0) (kms_vblank:575) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:575) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 0 (kms_vblank:575) igt_kms-DEBUG: display: SetCrtc pipe C, disabling (kms_vblank:575) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:575) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 17 (kms_vblank:575) igt_kms-DEBUG: display: SetCursor pipe C, disabling (kms_vblank:575) igt_kms-DEBUG: display: MoveCursor pipe C, (0, 0) (kms_vblank:575) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && pla<14>[ 117.023237] [IGT] kms_vblank: finished subtest pipe-A-Writeback-1, FAIL ne_idx <<14>[ 117.023311] [IGT] kms_vblank: finished subtest ts-continuation-dpms-rpm, FAIL pipe->n<14>[ 117.026947] [IGT] kms_vblank: exiting, ret=98 _planes (kms_vblank:575) igt_kms-DEBUG:<8>[ 117.046861] display: Fixing up initial rotation pipe D, plane 0 (kms_vblank:575) igt_kms-DEBUG: display: SetCrtc pipe D, disabling<14>[ 117.065256] [IGT] kms_vblank: executing (kms_vblank:575) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx <<14>[ 117.078246] [IGT] kms_vblank: starting subtest ts-continuation-dpms-suspend pipe->n<14>[ 117.078599] [IGT] kms_vblank: starting dynamic subtest pipe-A-Writeback-1 _planes (kms_vblank:575) igt_kms-DEBUG: display: Fixing up initial rotation pipe D, plane 17 (kms_vblank:575) igt_kms-DEBUG: display: SetCursor pipe D, disabling (kms_vblank:575) igt_kms-DEBUG: display: MoveCursor pipe D, (0, 0) (kms_vblank:575) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:575) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 0 (kms_vblank:575) igt_kms-DEBUG: display: SetCrtc pipe E, disabling (kms_vblank:575) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:575) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 17 (kms_vblank:575) igt_kms-DEBUG: display: SetCursor pipe E, disabling (kms_vblank:575) igt_kms-DEBUG: display: MoveCursor pipe E, (0, 0) (kms_vblank:575) igt_kms-DEBUG: display: } (kms_vblank:575) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:575) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:575) igt_kms-CRITICAL: Last errno: 16, Device or resource busy (kms_vblank:575) igt_core-INFO: Stack trace: (kms_vblank:575) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_vblank:575) igt_core-INFO: #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() (kms_vblank:575) igt_core-INFO: #2 [+0xc1b71f94] (kms_vblank:575) igt_core-INFO: #3 [+0xc1b72fa0] (kms_vblank:575) igt_core-INFO: #4 [+0xc1b731bc] (kms_vblank:575) igt_core-INFO: #5 [+0xc1b71c78] (kms_vblank:575) igt_core-INFO: #6 [__libc_init_first+0x80] (kms_vblank:575) igt_core-INFO: #7 [__libc_start_main+0x98] (kms_vblank:575) igt_core-INFO: #8 [+0xc1b71cb0] **** END **** [1mDynamic subtest pipe-A-Writeback-1: FAIL (3.735s)[0m [1mSubtest ts-continuation-dpms-rpm: FAIL (3.735s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305815 for randomisation Opened device: /dev/dri/card0 Starting subtest: ts-continuation-dpms-suspend Starting dynamic subtest: pipe-A-Writeback-1 (kms_vblank:578) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:578) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:578) igt_kms-CRITICAL: Last errno: 16, Device or resource busy Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() #2 [+0xc7671f94] #3 [+0xc7672fa0] #4 [+0xc76731bc] #5 [+0xc7671c78] #6 [__libc_init_first+0x80] #7 [__libc_start_main+0x98] #8 [+0xc7671cb0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** (kms_vblank:578) igt_kms-DEBUG: display: SetProp plane A.4 "rotation" to 0x1/1 (kms_vblank:578) igt_kms-DEBUG: display: SetProp plane A.4 "alpha" to 0xffff/65535 (kms_vblank:578) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:578) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 5 (kms_vblank:578) igt_kms-DEBUG: display: SetPlane pipe A, plane 5, disabling (kms_vblank:578) igt_kms-DEBUG: display: SetProp plane A.5 "rotation" to 0x1/1 (kms_vblank:578) igt_kms-DEBUG: display: SetProp plane A.5 "alpha" to 0xffff/65535 (kms_vblank:578) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:578) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 6 (kms_vblank:578) igt_kms-DEBUG: display: SetPlane pipe A, plane 6, disabling (kms_vblank:578) igt_kms-DEBUG: display: SetProp plane A.6 "rotation" to 0x1/1 (kms_vblank:578) igt_kms-DEBUG: display: SetProp plane A.6 "alpha" to 0xffff/65535 (kms_vblank:578) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:578) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 7 (kms_vblank:578) igt_kms-DEBUG: display: SetPlane pipe A, plane 7, disabling (kms_vblank:578) igt_kms-DEBUG: display: SetProp plane A.7 "rotation" to 0x1/1 (kms_vblank:578) igt_kms-DEBUG: display: SetProp plane A.7 "alpha" to 0xffff/65535 (kms_vblank:578) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:578) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 8 (kms_vblank:578) igt_kms-DEBUG: display: SetPlane pipe A, plane 8, disabling (kms_vblank:578) igt_kms-DEBUG: display: SetProp plane A.8 "rotation" to 0x1/1 (kms_vblank:578) igt_kms-DEBUG: display: SetProp plane A.8 "alpha" to 0xffff/65535 (kms_vblank:578) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:578) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 9 (kms_vblank:578) igt_kms-DEBUG: display: SetPlane pipe A, plane 9, disabling (kms_vblank:578) igt_kms-DEBUG: display: SetProp plane A.9 "rotation" to 0x1/1 (kms_vblank:578) igt_kms-DEBUG: display: SetProp plane A.9 "alpha" to 0xffff/65535 (kms_vblank:578) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:578) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 10 (kms_vblank:578) igt_kms-DEBUG: display: SetPlane pipe A, plane 10, disabling (kms_vblank:578) igt_kms-DEBUG: display: SetProp plane A.10 "rotation" to 0x1/1 (kms_vblank:578) igt_kms-DEBUG: display: SetProp plane A.10 "alpha" to 0xffff/65535 (kms_vblank:578) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:578) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 11 (kms_vblank:578) igt_kms-DEBUG: display: SetPlane pipe A, plane 11, disabling (kms_vblank:578) igt_kms-DEBUG: display: SetProp plane A.11 "rotation" to 0x1/1 (kms_vblank:578) igt_kms-DEBUG: display: SetProp plane A.11 "alpha" to 0xffff/65535 (kms_vblank:578) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:578) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 12 (kms_vblank:578) igt_kms-DEBUG: display: SetPlane pipe A, plane 12, disabling (kms_vblank:578) igt_kms-DEBUG: display: SetProp plane A.12 "rotation" to 0x1/1 (kms_vblank:578) igt_kms-DEBUG: display: SetProp plane A.12 "alpha" to 0xffff/65535 (kms_vblank:578) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:578) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 13 (kms_vblank:578) igt_kms-DEBUG: display: SetPlane pipe A, plane 13, disabling (kms_vblank:578) igt_kms-DEBUG: display: SetProp plane A.13 "rotation" to 0x1/1 (kms_vblank:578) igt_kms-DEBUG: display: SetProp plane A.13 "alpha" to 0xffff/65535 (kms_vblank:578) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:578) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 14 (kms_vblank:578) igt_kms-DEBUG: display: SetPlane pipe A, plane 14, disabling (kms_vblank:578) igt_kms-DEBUG: display: SetProp plane A.14 "rotation" to 0x1/1 (kms_vblank:578) igt_kms-DEBUG: display: SetProp plane A.14 "alpha" to 0xffff/65535 (kms_vblank:578) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:578) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 15 (kms_vblank:578) igt_kms-DEBUG: display: SetPlane pipe A, plane 15, disabling (kms_vblank:578) igt_kms-DEBUG: display: SetProp plane A.15 "rotation" to 0x1/1 (kms_vblank:578) igt_kms-DEBUG: display: SetProp plane A.15 "alpha" to 0xffff/65535 (kms_vblank:578) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:578) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 16 (kms_vblank:578) igt_kms-DEBUG: display: SetPlane pipe A, plane 16, disabling (kms_vblank:578) igt_kms-DEBUG: display: SetProp plane A.16 "rotation" to 0x1/1 (kms_vblank:578) igt_kms-DEBUG: display: SetProp plane A.16 "alpha" to 0xffff/65535 (kms_vblank:578) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:578) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 17 (kms_vblank:578) igt_kms-DEBUG: display: SetCursor pipe A, disabling (kms_vblank:578) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0) (kms_vblank:578) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:578) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 0 (kms_vblank:578) igt_kms-DEBUG: display: SetCrtc pipe B, disabling (kms_vblank:578) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:578) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 17 (kms_vblank:578) igt_kms-DEBUG: display: SetCursor pipe B, disabling (kms_vblank:578) igt_kms-DEBUG: display: MoveCursor pipe B, (0, 0) (kms_vblank:578) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:578) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 0 (kms_vblank:578) igt_kms-DEBUG: display: SetCrtc pipe C, disabling (kms_vblank:578) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:578) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 17 (kms_vblank:578) igt_kms-DEBUG: display: SetCursor pipe C, disabling (kms_vblank:578) igt_kms-DEBUG: display: MoveCursor pipe C, (0, 0) (kms_vblank:578) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && pla<14>[ 120.864244] [IGT] kms_vblank: finished subtest pipe-A-Writeback-1, FAIL ne_idx <<14>[ 120.864392] [IGT] kms_vblank: finished subtest ts-continuation-dpms-suspend, FAIL pipe->n<14>[ 120.872485] [IGT] kms_vblank: exiting, ret=98 _planes (kms_vblank:578) igt_kms-DEBUG: display: Fixing up initial rotation pipe D, plane 0 (kms_vblank:578) igt_k<8>[ 120.893821] ms-DEBUG: display: SetCrtc pipe D, disabling (kms_vblank:578) igt_kms-DEBUG: Test r<14>[ 120.912195] [IGT] kms_vblank: executing equirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:578) igt_kms-DEBUG: display: Fixing up initial rotation<14>[ 120.925371] [IGT] kms_vblank: starting subtest ts-continuation-suspend pipe D,<14>[ 120.925699] [IGT] kms_vblank: starting dynamic subtest pipe-A-Writeback-1 plane 17 (kms_vblank:578) igt_kms-DEBUG: display: SetCursor pipe D, disabling (kms_vblank:578) igt_kms-DEBUG: display: MoveCursor pipe D, (0, 0) (kms_vblank:578) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:578) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 0 (kms_vblank:578) igt_kms-DEBUG: display: SetCrtc pipe E, disabling (kms_vblank:578) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:578) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 17 (kms_vblank:578) igt_kms-DEBUG: display: SetCursor pipe E, disabling (kms_vblank:578) igt_kms-DEBUG: display: MoveCursor pipe E, (0, 0) (kms_vblank:578) igt_kms-DEBUG: display: } (kms_vblank:578) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:578) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:578) igt_kms-CRITICAL: Last errno: 16, Device or resource busy (kms_vblank:578) igt_core-INFO: Stack trace: (kms_vblank:578) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_vblank:578) igt_core-INFO: #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() (kms_vblank:578) igt_core-INFO: #2 [+0xc7671f94] (kms_vblank:578) igt_core-INFO: #3 [+0xc7672fa0] (kms_vblank:578) igt_core-INFO: #4 [+0xc76731bc] (kms_vblank:578) igt_core-INFO: #5 [+0xc7671c78] (kms_vblank:578) igt_core-INFO: #6 [__libc_init_first+0x80] (kms_vblank:578) igt_core-INFO: #7 [__libc_start_main+0x98] (kms_vblank:578) igt_core-INFO: #8 [+0xc7671cb0] **** END **** [1mDynamic subtest pipe-A-Writeback-1: FAIL (3.786s)[0m [1mSubtest ts-continuation-dpms-suspend: FAIL (3.786s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305818 for randomisation Opened device: /dev/dri/card0 Starting subtest: ts-continuation-suspend Starting dynamic subtest: pipe-A-Writeback-1 (kms_vblank:581) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:581) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:581) igt_kms-CRITICAL: Last errno: 16, Device or resource busy Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() #2 [+0xe5601f94] #3 [+0xe5602fa0] #4 [+0xe56031bc] #5 [+0xe5601c78] #6 [__libc_init_first+0x80] #7 [__libc_start_main+0x98] #8 [+0xe5601cb0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** (kms_vblank:581) igt_kms-DEBUG: display: SetProp plane A.4 "rotation" to 0x1/1 (kms_vblank:581) igt_kms-DEBUG: display: SetProp plane A.4 "alpha" to 0xffff/65535 (kms_vblank:581) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:581) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 5 (kms_vblank:581) igt_kms-DEBUG: display: SetPlane pipe A, plane 5, disabling (kms_vblank:581) igt_kms-DEBUG: display: SetProp plane A.5 "rotation" to 0x1/1 (kms_vblank:581) igt_kms-DEBUG: display: SetProp plane A.5 "alpha" to 0xffff/65535 (kms_vblank:581) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:581) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 6 (kms_vblank:581) igt_kms-DEBUG: display: SetPlane pipe A, plane 6, disabling (kms_vblank:581) igt_kms-DEBUG: display: SetProp plane A.6 "rotation" to 0x1/1 (kms_vblank:581) igt_kms-DEBUG: display: SetProp plane A.6 "alpha" to 0xffff/65535 (kms_vblank:581) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:581) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 7 (kms_vblank:581) igt_kms-DEBUG: display: SetPlane pipe A, plane 7, disabling (kms_vblank:581) igt_kms-DEBUG: display: SetProp plane A.7 "rotation" to 0x1/1 (kms_vblank:581) igt_kms-DEBUG: display: SetProp plane A.7 "alpha" to 0xffff/65535 (kms_vblank:581) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:581) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 8 (kms_vblank:581) igt_kms-DEBUG: display: SetPlane pipe A, plane 8, disabling (kms_vblank:581) igt_kms-DEBUG: display: SetProp plane A.8 "rotation" to 0x1/1 (kms_vblank:581) igt_kms-DEBUG: display: SetProp plane A.8 "alpha" to 0xffff/65535 (kms_vblank:581) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:581) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 9 (kms_vblank:581) igt_kms-DEBUG: display: SetPlane pipe A, plane 9, disabling (kms_vblank:581) igt_kms-DEBUG: display: SetProp plane A.9 "rotation" to 0x1/1 (kms_vblank:581) igt_kms-DEBUG: display: SetProp plane A.9 "alpha" to 0xffff/65535 (kms_vblank:581) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:581) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 10 (kms_vblank:581) igt_kms-DEBUG: display: SetPlane pipe A, plane 10, disabling (kms_vblank:581) igt_kms-DEBUG: display: SetProp plane A.10 "rotation" to 0x1/1 (kms_vblank:581) igt_kms-DEBUG: display: SetProp plane A.10 "alpha" to 0xffff/65535 (kms_vblank:581) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:581) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 11 (kms_vblank:581) igt_kms-DEBUG: display: SetPlane pipe A, plane 11, disabling (kms_vblank:581) igt_kms-DEBUG: display: SetProp plane A.11 "rotation" to 0x1/1 (kms_vblank:581) igt_kms-DEBUG: display: SetProp plane A.11 "alpha" to 0xffff/65535 (kms_vblank:581) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:581) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 12 (kms_vblank:581) igt_kms-DEBUG: display: SetPlane pipe A, plane 12, disabling (kms_vblank:581) igt_kms-DEBUG: display: SetProp plane A.12 "rotation" to 0x1/1 (kms_vblank:581) igt_kms-DEBUG: display: SetProp plane A.12 "alpha" to 0xffff/65535 (kms_vblank:581) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:581) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 13 (kms_vblank:581) igt_kms-DEBUG: display: SetPlane pipe A, plane 13, disabling (kms_vblank:581) igt_kms-DEBUG: display: SetProp plane A.13 "rotation" to 0x1/1 (kms_vblank:581) igt_kms-DEBUG: display: SetProp plane A.13 "alpha" to 0xffff/65535 (kms_vblank:581) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:581) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 14 (kms_vblank:581) igt_kms-DEBUG: display: SetPlane pipe A, plane 14, disabling (kms_vblank:581) igt_kms-DEBUG: display: SetProp plane A.14 "rotation" to 0x1/1 (kms_vblank:581) igt_kms-DEBUG: display: SetProp plane A.14 "alpha" to 0xffff/65535 (kms_vblank:581) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:581) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 15 (kms_vblank:581) igt_kms-DEBUG: display: SetPlane pipe A, plane 15, disabling (kms_vblank:581) igt_kms-DEBUG: display: SetProp plane A.15 "rotation" to 0x1/1 (kms_vblank:581) igt_kms-DEBUG: display: SetProp plane A.15 "alpha" to 0xffff/65535 (kms_vblank:581) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:581) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 16 (kms_vblank:581) igt_kms-DEBUG: display: SetPlane pipe A, plane 16, disabling (kms_vblank:581) igt_kms-DEBUG: display: SetProp plane A.16 "rotation" to 0x1/1 (kms_vblank:581) igt_kms-DEBUG: display: SetProp plane A.16 "alpha" to 0xffff/65535 (kms_vblank:581) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:581) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 17 (kms_vblank:581) igt_kms-DEBUG: display: SetCursor pipe A, disabling (kms_vblank:581) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0) (kms_vblank:581) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:581) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 0 (kms_vblank:581) igt_kms-DEBUG: display: SetCrtc pipe B, disabling (kms_vblank:581) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:581) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 17 (kms_vblank:581) igt_kms-DEBUG: display: SetCursor pipe B, disabling (kms_vblank:581) igt_kms-DEBUG: display: MoveCursor pipe B, (0, 0) (kms_vblank:581) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:581) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 0 (kms_vblank:581) igt_kms-DEBUG: display: SetCrtc pipe C, disabling (kms_vblank:581) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:581) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 17 (kms_vblank:581) igt_kms-DEBUG: display: SetCursor pipe C, disabling (kms_vblank:581) igt_kms-DEBUG: display: MoveCursor pipe C, (0, 0) (kms_vblank:581) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && pla<14>[ 124.704243] [IGT] kms_vblank: finished subtest pipe-A-Writeback-1, FAIL ne_idx <<14>[ 124.704389] [IGT] kms_vblank: finished subtest ts-continuation-suspend, FAIL pipe->n<14>[ 124.706195] [IGT] kms_vblank: exiting, ret=98 _planes (kms_vblank:581) igt_kms-DEBUG:<8>[ 124.727536] display: Fixing up initial rotation pipe D, plane 0 (kms_vblank:581) igt_kms-DEBUG: display: SetCrtc pipe D, disabling (kms_vblank:581) igt_kms-DEBUG: Test requireme<14>[ 124.748841] [IGT] kms_vblank: executing nt passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:581) igt_kms-DEBUG:<14>[ 124.762240] [IGT] kms_vblank: starting subtest ts-continuation-modeset display<14>[ 124.762570] [IGT] kms_vblank: starting dynamic subtest pipe-A-Writeback-1 : Fixing up initial rotation pipe D, plane 17 (kms_vblank:581) igt_kms-DEBUG: display: SetCursor pipe D, disabling (kms_vblank:581) igt_kms-DEBUG: display: MoveCursor pipe D, (0, 0) (kms_vblank:581) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:581) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 0 (kms_vblank:581) igt_kms-DEBUG: display: SetCrtc pipe E, disabling (kms_vblank:581) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:581) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 17 (kms_vblank:581) igt_kms-DEBUG: display: SetCursor pipe E, disabling (kms_vblank:581) igt_kms-DEBUG: display: MoveCursor pipe E, (0, 0) (kms_vblank:581) igt_kms-DEBUG: display: } (kms_vblank:581) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:581) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:581) igt_kms-CRITICAL: Last errno: 16, Device or resource busy (kms_vblank:581) igt_core-INFO: Stack trace: (kms_vblank:581) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_vblank:581) igt_core-INFO: #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() (kms_vblank:581) igt_core-INFO: #2 [+0xe5601f94] (kms_vblank:581) igt_core-INFO: #3 [+0xe5602fa0] (kms_vblank:581) igt_core-INFO: #4 [+0xe56031bc] (kms_vblank:581) igt_core-INFO: #5 [+0xe5601c78] (kms_vblank:581) igt_core-INFO: #6 [__libc_init_first+0x80] (kms_vblank:581) igt_core-INFO: #7 [__libc_start_main+0x98] (kms_vblank:581) igt_core-INFO: #8 [+0xe5601cb0] **** END **** [1mDynamic subtest pipe-A-Writeback-1: FAIL (3.778s)[0m [1mSubtest ts-continuation-suspend: FAIL (3.779s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305822 for randomisation Opened device: /dev/dri/card0 Starting subtest: ts-continuation-modeset Starting dynamic subtest: pipe-A-Writeback-1 (kms_vblank:584) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:584) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:584) igt_kms-CRITICAL: Last errno: 16, Device or resource busy Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() #2 [+0xd4611f94] #3 [+0xd4612fa0] #4 [+0xd46131bc] #5 [+0xd4611c78] #6 [__libc_init_first+0x80] #7 [__libc_start_main+0x98] #8 [+0xd4611cb0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** (kms_vblank:584) igt_kms-DEBUG: display: SetProp plane A.4 "rotation" to 0x1/1 (kms_vblank:584) igt_kms-DEBUG: display: SetProp plane A.4 "alpha" to 0xffff/65535 (kms_vblank:584) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:584) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 5 (kms_vblank:584) igt_kms-DEBUG: display: SetPlane pipe A, plane 5, disabling (kms_vblank:584) igt_kms-DEBUG: display: SetProp plane A.5 "rotation" to 0x1/1 (kms_vblank:584) igt_kms-DEBUG: display: SetProp plane A.5 "alpha" to 0xffff/65535 (kms_vblank:584) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:584) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 6 (kms_vblank:584) igt_kms-DEBUG: display: SetPlane pipe A, plane 6, disabling (kms_vblank:584) igt_kms-DEBUG: display: SetProp plane A.6 "rotation" to 0x1/1 (kms_vblank:584) igt_kms-DEBUG: display: SetProp plane A.6 "alpha" to 0xffff/65535 (kms_vblank:584) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:584) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 7 (kms_vblank:584) igt_kms-DEBUG: display: SetPlane pipe A, plane 7, disabling (kms_vblank:584) igt_kms-DEBUG: display: SetProp plane A.7 "rotation" to 0x1/1 (kms_vblank:584) igt_kms-DEBUG: display: SetProp plane A.7 "alpha" to 0xffff/65535 (kms_vblank:584) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:584) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 8 (kms_vblank:584) igt_kms-DEBUG: display: SetPlane pipe A, plane 8, disabling (kms_vblank:584) igt_kms-DEBUG: display: SetProp plane A.8 "rotation" to 0x1/1 (kms_vblank:584) igt_kms-DEBUG: display: SetProp plane A.8 "alpha" to 0xffff/65535 (kms_vblank:584) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:584) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 9 (kms_vblank:584) igt_kms-DEBUG: display: SetPlane pipe A, plane 9, disabling (kms_vblank:584) igt_kms-DEBUG: display: SetProp plane A.9 "rotation" to 0x1/1 (kms_vblank:584) igt_kms-DEBUG: display: SetProp plane A.9 "alpha" to 0xffff/65535 (kms_vblank:584) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:584) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 10 (kms_vblank:584) igt_kms-DEBUG: display: SetPlane pipe A, plane 10, disabling (kms_vblank:584) igt_kms-DEBUG: display: SetProp plane A.10 "rotation" to 0x1/1 (kms_vblank:584) igt_kms-DEBUG: display: SetProp plane A.10 "alpha" to 0xffff/65535 (kms_vblank:584) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:584) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 11 (kms_vblank:584) igt_kms-DEBUG: display: SetPlane pipe A, plane 11, disabling (kms_vblank:584) igt_kms-DEBUG: display: SetProp plane A.11 "rotation" to 0x1/1 (kms_vblank:584) igt_kms-DEBUG: display: SetProp plane A.11 "alpha" to 0xffff/65535 (kms_vblank:584) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:584) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 12 (kms_vblank:584) igt_kms-DEBUG: display: SetPlane pipe A, plane 12, disabling (kms_vblank:584) igt_kms-DEBUG: display: SetProp plane A.12 "rotation" to 0x1/1 (kms_vblank:584) igt_kms-DEBUG: display: SetProp plane A.12 "alpha" to 0xffff/65535 (kms_vblank:584) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:584) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 13 (kms_vblank:584) igt_kms-DEBUG: display: SetPlane pipe A, plane 13, disabling (kms_vblank:584) igt_kms-DEBUG: display: SetProp plane A.13 "rotation" to 0x1/1 (kms_vblank:584) igt_kms-DEBUG: display: SetProp plane A.13 "alpha" to 0xffff/65535 (kms_vblank:584) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:584) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 14 (kms_vblank:584) igt_kms-DEBUG: display: SetPlane pipe A, plane 14, disabling (kms_vblank:584) igt_kms-DEBUG: display: SetProp plane A.14 "rotation" to 0x1/1 (kms_vblank:584) igt_kms-DEBUG: display: SetProp plane A.14 "alpha" to 0xffff/65535 (kms_vblank:584) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:584) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 15 (kms_vblank:584) igt_kms-DEBUG: display: SetPlane pipe A, plane 15, disabling (kms_vblank:584) igt_kms-DEBUG: display: SetProp plane A.15 "rotation" to 0x1/1 (kms_vblank:584) igt_kms-DEBUG: display: SetProp plane A.15 "alpha" to 0xffff/65535 (kms_vblank:584) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:584) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 16 (kms_vblank:584) igt_kms-DEBUG: display: SetPlane pipe A, plane 16, disabling (kms_vblank:584) igt_kms-DEBUG: display: SetProp plane A.16 "rotation" to 0x1/1 (kms_vblank:584) igt_kms-DEBUG: display: SetProp plane A.16 "alpha" to 0xffff/65535 (kms_vblank:584) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:584) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 17 (kms_vblank:584) igt_kms-DEBUG: display: SetCursor pipe A, disabling (kms_vblank:584) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0) (kms_vblank:584) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:584) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 0 (kms_vblank:584) igt_kms-DEBUG: display: SetCrtc pipe B, disabling (kms_vblank:584) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:584) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 17 (kms_vblank:584) igt_kms-DEBUG: display: SetCursor pipe B, disabling (kms_vblank:584) igt_kms-DEBUG: display: MoveCursor pipe B, (0, 0) (kms_vblank:584) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:584) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 0 (kms_vblank:584) igt_kms-DEBUG: display: SetCrtc pipe C, disabling (kms_vblank:584) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:584) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 17 (kms_vblank:584) igt_kms-DEBUG: display: SetCursor pipe C, disabling (kms_vblank:584) igt_kms-DEBUG: display: MoveCursor pipe C, (0, 0) (kms_vblank:584) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && pla<14>[ 128.544210] [IGT] kms_vblank: finished subtest pipe-A-Writeback-1, FAIL ne_idx <<14>[ 128.544353] [IGT] kms_vblank: finished subtest ts-continuation-modeset, FAIL pipe->n<14>[ 128.552483] [IGT] kms_vblank: exiting, ret=98 _planes (kms_vblank:584) igt_kms-DEBUG: display: Fixing up initial rotation pipe D, plane 0 (kms_vblank:584) igt_kms-DEBUG<8>[ 128.573659] : display: SetCrtc pipe D, disabling (kms_vblank:584) igt_kms-DEBUG: Test requireme<14>[ 128.592078] [IGT] kms_vblank: executing nt passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:584) igt_kms-DEBUG: display: Fixing up initial <14>[ 128.605397] [IGT] kms_vblank: starting subtest ts-continuation-modeset-hang rotation<14>[ 128.605520] [IGT] kms_vblank: finished subtest ts-continuation-modeset-hang, SKIP pipe D,<14>[ 128.605658] [IGT] kms_vblank: exiting, ret=77 plane 1<8>[ 128.610424] 7 (kms_<14>[ 128.629562] [IGT] kms_vblank: executing vblank:584) igt_kms-DEBUG: display: SetCursor pipe D, disabling (kms_vblank:584) igt_kms-DEBUG: display: MoveCursor pipe D, (0, 0) (kms_vblank<14>[ 128.656345] [IGT] kms_vblank: starting subtest ts-continuation-modeset-rpm :584) ig<14>[ 128.656655] [IGT] kms_vblank: starting dynamic subtest pipe-A-Writeback-1 t_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:584) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 0 (kms_vblank:584) igt_kms-DEBUG: display: SetCrtc pipe E, disabling (kms_vblank:584) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:584) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 17 (kms_vblank:584) igt_kms-DEBUG: display: SetCursor pipe E, disabling (kms_vblank:584) igt_kms-DEBUG: display: MoveCursor pipe E, (0, 0) (kms_vblank:584) igt_kms-DEBUG: display: } (kms_vblank:584) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:584) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:584) igt_kms-CRITICAL: Last errno: 16, Device or resource busy (kms_vblank:584) igt_core-INFO: Stack trace: (kms_vblank:584) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_vblank:584) igt_core-INFO: #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() (kms_vblank:584) igt_core-INFO: #2 [+0xd4611f94] (kms_vblank:584) igt_core-INFO: #3 [+0xd4612fa0] (kms_vblank:584) igt_core-INFO: #4 [+0xd46131bc] (kms_vblank:584) igt_core-INFO: #5 [+0xd4611c78] (kms_vblank:584) igt_core-INFO: #6 [__libc_init_first+0x80] (kms_vblank:584) igt_core-INFO: #7 [__libc_start_main+0x98] (kms_vblank:584) igt_core-INFO: #8 [+0xd4611cb0] **** END **** [1mDynamic subtest pipe-A-Writeback-1: FAIL (3.782s)[0m [1mSubtest ts-continuation-modeset: FAIL (3.782s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305826 for randomisation Opened device: /dev/dri/card0 Starting subtest: ts-continuation-modeset-hang Test requirement not met in function gem_context_require_bannable, file ../lib/i915/gem_context.c:324: Test requirement: has_ban_period || has_bannable Last errno: 22, Invalid argument [1mSubtest ts-continuation-modeset-hang: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305826 for randomisation Opened device: /dev/dri/card0 Starting subtest: ts-continuation-modeset-rpm Starting dynamic subtest: pipe-A-Writeback-1 (kms_vblank:590) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:590) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:590) igt_kms-CRITICAL: Last errno: 16, Device or resource busy Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() #2 [+0xcae61f94] #3 [+0xcae62fa0] #4 [+0xcae631bc] #5 [+0xcae61c78] #6 [__libc_init_first+0x80] #7 [__libc_start_main+0x98] #8 [+0xcae61cb0] Dynamic subtest pipe-A-Writeback-1 failed. **** DEBUG **** (kms_vblank:590) igt_kms-DEBUG: display: SetProp plane A.4 "rotation" to 0x1/1 (kms_vblank:590) igt_kms-DEBUG: display: SetProp plane A.4 "alpha" to 0xffff/65535 (kms_vblank:590) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:590) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 5 (kms_vblank:590) igt_kms-DEBUG: display: SetPlane pipe A, plane 5, disabling (kms_vblank:590) igt_kms-DEBUG: display: SetProp plane A.5 "rotation" to 0x1/1 (kms_vblank:590) igt_kms-DEBUG: display: SetProp plane A.5 "alpha" to 0xffff/65535 (kms_vblank:590) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:590) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 6 (kms_vblank:590) igt_kms-DEBUG: display: SetPlane pipe A, plane 6, disabling (kms_vblank:590) igt_kms-DEBUG: display: SetProp plane A.6 "rotation" to 0x1/1 (kms_vblank:590) igt_kms-DEBUG: display: SetProp plane A.6 "alpha" to 0xffff/65535 (kms_vblank:590) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:590) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 7 (kms_vblank:590) igt_kms-DEBUG: display: SetPlane pipe A, plane 7, disabling (kms_vblank:590) igt_kms-DEBUG: display: SetProp plane A.7 "rotation" to 0x1/1 (kms_vblank:590) igt_kms-DEBUG: display: SetProp plane A.7 "alpha" to 0xffff/65535 (kms_vblank:590) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:590) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 8 (kms_vblank:590) igt_kms-DEBUG: display: SetPlane pipe A, plane 8, disabling (kms_vblank:590) igt_kms-DEBUG: display: SetProp plane A.8 "rotation" to 0x1/1 (kms_vblank:590) igt_kms-DEBUG: display: SetProp plane A.8 "alpha" to 0xffff/65535 (kms_vblank:590) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:590) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 9 (kms_vblank:590) igt_kms-DEBUG: display: SetPlane pipe A, plane 9, disabling (kms_vblank:590) igt_kms-DEBUG: display: SetProp plane A.9 "rotation" to 0x1/1 (kms_vblank:590) igt_kms-DEBUG: display: SetProp plane A.9 "alpha" to 0xffff/65535 (kms_vblank:590) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:590) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 10 (kms_vblank:590) igt_kms-DEBUG: display: SetPlane pipe A, plane 10, disabling (kms_vblank:590) igt_kms-DEBUG: display: SetProp plane A.10 "rotation" to 0x1/1 (kms_vblank:590) igt_kms-DEBUG: display: SetProp plane A.10 "alpha" to 0xffff/65535 (kms_vblank:590) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:590) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 11 (kms_vblank:590) igt_kms-DEBUG: display: SetPlane pipe A, plane 11, disabling (kms_vblank:590) igt_kms-DEBUG: display: SetProp plane A.11 "rotation" to 0x1/1 (kms_vblank:590) igt_kms-DEBUG: display: SetProp plane A.11 "alpha" to 0xffff/65535 (kms_vblank:590) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:590) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 12 (kms_vblank:590) igt_kms-DEBUG: display: SetPlane pipe A, plane 12, disabling (kms_vblank:590) igt_kms-DEBUG: display: SetProp plane A.12 "rotation" to 0x1/1 (kms_vblank:590) igt_kms-DEBUG: display: SetProp plane A.12 "alpha" to 0xffff/65535 (kms_vblank:590) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:590) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 13 (kms_vblank:590) igt_kms-DEBUG: display: SetPlane pipe A, plane 13, disabling (kms_vblank:590) igt_kms-DEBUG: display: SetProp plane A.13 "rotation" to 0x1/1 (kms_vblank:590) igt_kms-DEBUG: display: SetProp plane A.13 "alpha" to 0xffff/65535 (kms_vblank:590) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:590) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 14 (kms_vblank:590) igt_kms-DEBUG: display: SetPlane pipe A, plane 14, disabling (kms_vblank:590) igt_kms-DEBUG: display: SetProp plane A.14 "rotation" to 0x1/1 (kms_vblank:590) igt_kms-DEBUG: display: SetProp plane A.14 "alpha" to 0xffff/65535 (kms_vblank:590) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:590) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 15 (kms_vblank:590) igt_kms-DEBUG: display: SetPlane pipe A, plane 15, disabling (kms_vblank:590) igt_kms-DEBUG: display: SetProp plane A.15 "rotation" to 0x1/1 (kms_vblank:590) igt_kms-DEBUG: display: SetProp plane A.15 "alpha" to 0xffff/65535 (kms_vblank:590) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:590) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 16 (kms_vblank:590) igt_kms-DEBUG: display: SetPlane pipe A, plane 16, disabling (kms_vblank:590) igt_kms-DEBUG: display: SetProp plane A.16 "rotation" to 0x1/1 (kms_vblank:590) igt_kms-DEBUG: display: SetProp plane A.16 "alpha" to 0xffff/65535 (kms_vblank:590) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:590) igt_kms-DEBUG: display: Fixing up initial rotation pipe A, plane 17 (kms_vblank:590) igt_kms-DEBUG: display: SetCursor pipe A, disabling (kms_vblank:590) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0) (kms_vblank:590) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:590) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 0 (kms_vblank:590) igt_kms-DEBUG: display: SetCrtc pipe B, disabling (kms_vblank:590) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:590) igt_kms-DEBUG: display: Fixing up initial rotation pipe B, plane 17 (kms_vblank:590) igt_kms-DEBUG: display: SetCursor pipe B, disabling (kms_vblank:590) igt_kms-DEBUG: display: MoveCursor pipe B, (0, 0) (kms_vblank:590) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:590) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 0 (kms_vblank:590) igt_kms-DEBUG: display: SetCrtc pipe C, disabling (kms_vblank:590) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:590) igt_kms-DEBUG: display: Fixing up initial rotation pipe C, plane 17 (kms_vblank:590) igt_kms-DEBUG: display: SetCursor pipe C, disabling (kms_vblank:590) igt_kms-DEBUG: display: MoveCursor pipe C, (0, 0) (kms_vblank:590) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && pla<14>[ 132.384221] [IGT] kms_vblank: finished subtest pipe-A-Writeback-1, FAIL ne_idx <<14>[ 132.384371] [IGT] kms_vblank: finished subtest ts-continuation-modeset-rpm, FAIL pipe->n_planes (kms_vblank:590) igt_kms-DEBUG:<14>[ 132.404762] [IGT] kms_vblank: exiting, ret=98 display: Fixing up initial rotation pipe D, plane 0 (kms_vblank:590) igt_k<8>[ 132.416640] ms-DEBUG<8>[ 132.419474] : display: SetCrtc pipe D, disabling (kms_vblank:590) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:590) igt_kms-DEBUG:<8>[ 132.444608] display: Fixing up initial rotation pipe D, plane 17 (kms_vblank:590) igt_kms-DEBUG: display: SetCursor pipe D, disabling (kms_vblank:590) igt_kms-DE<14>[ 132.463099] [IGT] vc4_create_bo: executing BUG: dis<14>[ 132.463444] [IGT] vc4_create_bo: starting subtest create-bo-4096 play: MoveCursor pipe D, (0, 0) (kms_vblank:590) igt_kms-DEBUG: Test requirement passed: pl<14>[ 132.483091] [IGT] vc4_create_bo: finished subtest create-bo-4096, FAIL ane_idx <14>[ 132.483206] [IGT] vc4_create_bo: exiting, ret=98 >= 0 && <8>[ 132.488017] plane_idx < pipe->n_planes (kms_vblank:<14>[ 132.506006] [IGT] vc4_create_bo: executing 590) igt<14>[ 132.506318] [IGT] vc4_create_bo: starting subtest create-bo-0 _kms-DEBUG: display: Fixing up initial rotation pipe E, plane 0 (kms_vblank:590) igt_kms-DEBUG: display: SetCrtc pipe E, disabling (kms_vblank:590) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes (kms_vblank:590) igt_kms-DEBUG: display: Fixing up initial rotation pipe E, plane 17 (kms_vblank:590) igt_kms-DEBUG: display: SetCursor pipe E, disabling (kms_vblank:590) igt_kms-DEBUG: display: MoveCursor pipe E, (0, 0) (kms_vblank:590) igt_kms-DEBUG: display: } (kms_vblank:590) igt_kms-CRITICAL: Test assertion failure function igt_wait_for_vblank, file ../lib/igt_kms.c:5248: (kms_vblank:590) igt_kms-CRITICAL: Failed assertion: __igt_vblank_wait(drm_fd, crtc_offset, 1) == 0 (kms_vblank:590) igt_kms-CRITICAL: Last errno: 16, Device or resource busy (kms_vblank:590) igt_core-INFO: Stack trace: (kms_vblank:590) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (kms_vblank:590) igt_core-INFO: #1 ../lib/igt_kms.c:5233 igt_wait_for_vblank_count() (kms_vblank:590) igt_core-INFO: #2 [+0xcae61f94] (kms_vblank:590) igt_core-INFO: #3 [+0xcae62fa0] (kms_vblank:590) igt_core-INFO: #4 [+0xcae631bc] (kms_vblank:590) igt_core-INFO: #5 [+0xcae61c78] (kms_vblank:590) igt_core-INFO: #6 [__libc_init_first+0x80] (kms_vblank:590) igt_core-INFO: #7 [__libc_start_main+0x98] (kms_vblank:590) igt_core-INFO: #8 [+0xcae61cb0] **** END **** [1mDynamic subtest pipe-A-Writeback-1: FAIL (3.727s)[0m [1mSubtest ts-continuation-modeset-rpm: FAIL (3.728s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305830 for randomisation Opened device: /dev/dri/card0 Starting subtest: create-bo-4096 (vc4_create_bo:596) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_create_bo:596) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_create_bo:596) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_create_bo:596) igt_vc4-CRITICAL: error: -1 != 0 Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 [igt_vc4_create_bo+0x9c] #2 [+0xba2011d4] #3 [+0xba200dec] #4 [__libc_init_first+0x80] #5 [__libc_start_main+0x98] #6 [+0xba200e30] Subtest create-bo-4096 failed. **** DEBUG **** (vc4_create_bo:596) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_create_bo:596) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_create_bo:596) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_create_bo:596) igt_vc4-CRITICAL: error: -1 != 0 (vc4_create_bo:596) igt_core-INFO: Stack trace: (vc4_create_bo:596) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (vc4_create_bo:596) igt_core-INFO: #1 [igt_vc4_create_bo+0x9c] (vc4_create_bo:596) igt_core-INFO: #2 [+0xba2011d4] (vc4_create_bo:596) igt_core-INFO: #3 [+0xba200dec] (vc4_create_bo:596) igt_core-INFO: #4 [__libc_init_first+0x80] (vc4_create_bo:596) igt_core-INFO: #5 [__libc_start_main+0x98] (vc4_create_bo:596) igt_core-INFO: #6 [+0xba200e30] **** END **** [1mSubtest create-bo-4096: FAIL (0.020s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305830 for randomisation Opened device: /dev/dri/card0 Starting subtest: create-bo-0 (vc4_create_bo:599) CRITICAL: Test assertion failure function __igt_unique____real_main27, file ../tests/vc4/vc4_create_bo.c:45: (vc4_create_bo:599) CRIT<14>[ 132.865446] [IGT] vc4_create_bo: finished subtest create-bo-0, FAIL ICAL: Fa<14>[ 132.865569] [IGT] vc4_create_bo: exiting, ret=98 iled ass<8>[ 132.871981] ertion: (*__errno_location ()) == 22 (vc4_create_bo:599) CRITICAL: Last errno: 19, No such device (vc4_create_bo:599) CRITICAL: error: 19 != 22 Stack<14>[ 132.897331] [IGT] vc4_create_bo: executing trace: <14>[ 132.897678] [IGT] vc4_create_bo: starting subtest create-bo-zeroed #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 [+0xe5d41268] #2 [+0<14>[ 132.917596] [IGT] vc4_create_bo: finished subtest create-bo-zeroed, FAIL xe5d40de<14>[ 132.917706] [IGT] vc4_create_bo: exiting, ret=98 c] #3<8>[ 132.922260] [__libc<8>[ 132.923530] _init_fi<8>[ 132.940645] rst+0x80] #4 [__libc_start_main+0x98] #5 [+0xe5d40e30] Subtest create-bo<14>[ 132.958466] [IGT] vc4_dmabuf_poll: executing -0 faile<14>[ 132.958812] [IGT] vc4_dmabuf_poll: starting subtest poll-write-waits-until-write-done d. **** DEBUG **** (vc4_create_bo:599) CRITICAL: Test assertion failure function __igt_unique____real_main27, file ../tests/vc4/vc4_create_bo.c:45: (vc4_create_bo:599) CRITICAL: Failed assertion: (*__errno_location ()) == 22 (vc4_create_bo:599) CRITICAL: Last errno: 19, No such device (vc4_create_bo:599) CRITICAL: error: 19 != 22 (vc4_create_bo:599) igt_core-INFO: Stack trace: (vc4_create_bo:599) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (vc4_create_bo:599) igt_core-INFO: #1 [+0xe5d41268] (vc4_create_bo:599) igt_core-INFO: #2 [+0xe5d40dec] (vc4_create_bo:599) igt_core-INFO: #3 [__libc_init_first+0x80] (vc4_create_bo:599) igt_core-INFO: #4 [__libc_start_main+0x98] (vc4_create_bo:599) igt_core-INFO: #5 [+0xe5d40e30] **** END **** [1mSubtest create-bo-0: FAIL (0.359s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305830 for randomisation Opened device: /dev/dri/card0 Starting subtest: create-bo-zeroed (vc4_create_bo:602) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_create_bo:602) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_create_bo:602) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_create_bo:602) igt_vc4-CRITICAL: error: -1 != 0 Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 [igt_vc4_create_bo+0x9c] #2 [+0xdbe6110c] #3 [+0xdbe60dec] #4 [__libc_init_first+0x80] #5 [__libc_start_main+0x98] #6 [+0xdbe60e30] Subtest create-bo-zeroed failed. **** DEBUG **** (vc4_create_bo:602) drmtest-DEBUG: Force option used: Using driver vc4 (vc4_create_bo:602) drmtest-DEBUG: Opened previously opened device: /dev/dri/card0 (vc4_create_bo:602) drmtest-DEBUG: Test requirement passed: !(fd<0) (vc4_create_bo:602) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_create_bo:602) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_create_bo:602) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_create_bo:602) igt_vc4-CRITICAL: error: -1 != 0 (vc4_create_bo:602) igt_core-INFO: Stack trace: (vc4_create_bo:602) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (vc4_create_bo:602) igt_core-INFO: #1 [igt_vc4_create_bo+0x9c] (vc4_create_bo:602) igt_core-INFO: #2 [+0xdbe6110c] (vc4_create_bo:602) igt_core-INFO: #3 [+0xdbe60dec] (vc4_create_bo:602) igt_core-INFO: #4 [__libc_init_first+0x80] (vc4_create_bo:602) igt_core-INFO: #5 [__libc_start_main+0x98] (vc4_create_bo:602) igt_core-INFO: #6 [+0xdbe60e30] **** END **** [1mSubtest create-bo-zeroed: FAIL (0.020s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305830 for randomisation Opened device: /dev/dri/card0 Starting subtest: poll-write-waits-until-write-done (vc4_dmabuf_poll:608) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_dmabuf_poll:608) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_dmabuf_poll:608) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_dmabuf_poll:608) igt_vc4-CRITICAL: error: -1 != 0 Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 [igt_vc4_create_bo+0x9c] #2 ../lib/igt_vc4.c:88 igt_vc4_get_cleared_bo() #3 [+0xe<14>[ 133.317912] [IGT] vc4_dmabuf_poll: finished subtest poll-write-waits-until-write-done, FAIL 1c70f48]<14>[ 133.318114] [IGT] vc4_dmabuf_poll: exiting, ret=98 #4 [<8>[ 133.323680] +0xe1c711b0] #5 [+0<14>[ 133.345767] [IGT] vc4_dmabuf_poll: executing xe1c70de<14>[ 133.346118] [IGT] vc4_dmabuf_poll: starting subtest poll-read-waits-until-write-done c] #6 [__libc_init_first+0x80] #7 [__libc_start_main+0x98] #8 [+0xe1c70e30] Subtest poll-write-waits-<14>[ 133.369773] [IGT] vc4_dmabuf_poll: finished subtest poll-read-waits-until-write-done, FAIL until-wr<14>[ 133.369885] [IGT] vc4_dmabuf_poll: exiting, ret=98 ite-done<8>[ 133.374740] failed.<8>[ 133.376110] **** D<8>[ 133.395932] EBUG **** (vc4_dmabuf_poll:608) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, fi<14>[ 133.413212] [IGT] vc4_label_bo: executing le ../li<14>[ 133.413572] [IGT] vc4_label_bo: starting subtest set-label b/igt_vc4.c:126: (vc4_dmabuf_poll:608) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_dmabuf_poll:608) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_dmabuf_poll:608) igt_vc4-CRITICAL: error: -1 != 0 (vc4_dmabuf_poll:608) igt_core-INFO: Stack trace: (vc4_dmabuf_poll:608) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (vc4_dmabuf_poll:608) igt_core-INFO: #1 [igt_vc4_create_bo+0x9c] (vc4_dmabuf_poll:608) igt_core-INFO: #2 ../lib/igt_vc4.c:88 igt_vc4_get_cleared_bo() (vc4_dmabuf_poll:608) igt_core-INFO: #3 [+0xe1c70f48] (vc4_dmabuf_poll:608) igt_core-INFO: #4 [+0xe1c711b0] (vc4_dmabuf_poll:608) igt_core-INFO: #5 [+0xe1c70dec] (vc4_dmabuf_poll:608) igt_core-INFO: #6 [__libc_init_first+0x80] (vc4_dmabuf_poll:608) igt_core-INFO: #7 [__libc_start_main+0x98] (vc4_dmabuf_poll:608) igt_core-INFO: #8 [+0xe1c70e30] **** END **** [1mSubtest poll-write-waits-until-write-done: FAIL (0.359s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305831 for randomisation Opened device: /dev/dri/card0 Starting subtest: poll-read-waits-until-write-done (vc4_dmabuf_poll:611) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_dmabuf_poll:611) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_dmabuf_poll:611) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_dmabuf_poll:611) igt_vc4-CRITICAL: error: -1 != 0 Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 [igt_vc4_create_bo+0x9c] #2 ../lib/igt_vc4.c:88 igt_vc4_get_cleared_bo() #3 [+0xe3620f48] #4 [+0xe3621188] #5 [+0xe3620dec] #6 [__libc_init_first+0x80] #7 [__libc_start_main+0x98] #8 [+0xe3620e30] Subtest poll-read-waits-until-write-done failed. **** DEBUG **** (vc4_dmabuf_poll:611) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_dmabuf_poll:611) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_dmabuf_poll:611) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_dmabuf_poll:611) igt_vc4-CRITICAL: error: -1 != 0 (vc4_dmabuf_poll:611) igt_core-INFO: Stack trace: (vc4_dmabuf_poll:611) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (vc4_dmabuf_poll:611) igt_core-INFO: #1 [igt_vc4_create_bo+0x9c] (vc4_dmabuf_poll:611) igt_core-INFO: #2 ../lib/igt_vc4.c:88 igt_vc4_get_cleared_bo() (vc4_dmabuf_poll:611) igt_core-INFO: #3 [+0xe3620f48] (vc4_dmabuf_poll:611) igt_core-INFO: #4 [+0xe3621188] (vc4_dmabuf_poll:611) igt_core-INFO: #5 [+0xe3620dec] (vc4_dmabuf_poll:611) igt_core-INFO: #6 [__libc_init_first+0x80] (vc4_dmabuf_poll:611) igt_core-INFO: #7 [__libc_start_main+0x98] (vc4_dmabuf_poll:611) igt_core-INFO: #8 [+0xe3620e30] **** END **** [1mSubtest poll-read-waits-until-write-done: FAIL (0.024s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305831 for randomisation Opened device: /dev/dri/card0 Starting subtest: set-label (vc4_label_bo:617) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_label_bo:617) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_creat<14>[ 133.773923] [IGT] vc4_label_bo: finished subtest set-label, FAIL e_bo))))<14>[ 133.774043] [IGT] vc4_label_bo: exiting, ret=98 << ((0+<8>[ 133.779052] 8)+8)))), (&create)) == 0 (vc4_label_bo:617) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_lab<14>[ 133.801986] [IGT] vc4_label_bo: executing el_bo:61<14>[ 133.802330] [IGT] vc4_label_bo: starting subtest set-bad-handle 7) igt_v<3>[ 133.802364] [drm:vc4_label_bo_ioctl [vc4]] *ERROR* Failed to look up GEM BO -791621424 c4-CRITI<14>[ 133.802444] [IGT] vc4_label_bo: finished subtest set-bad-handle, SUCCESS CAL: err<14>[ 133.802534] [IGT] vc4_label_bo: exiting, ret=0 or: -1 !<8>[ 133.807219] = 0 Sta<14>[ 133.825563] [IGT] vc4_label_bo: executing ck trace: #0 <14>[ 133.851984] [IGT] vc4_label_bo: starting subtest set-bad-name ../lib/igt_core.c:1989 __igt_fail_assert() #1 [igt_vc4_create_bo+0x9c] #2 [+0xe83f12c0] #3 [[ 133.868378] [IGT] vc4_label_bo: finished subtest set-bad-name, FAIL nknown>+<14>[ 133.868483] [IGT] vc4_label_bo: exiting, ret=98 0xe83f0d<8>[ 133.872951] 6c] #4 [__libc_init_first+0x80] #5<14>[ 133.889634] [IGT] vc4_label_bo: executing [__libc<14>[ 133.889983] [IGT] vc4_label_bo: starting subtest set-kernel-name _start_main+0x98] #6 [+0xe83f0db0] Subtest set-label failed. **** DEBUG **** (vc4_label_bo:617) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_label_bo:617) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_label_bo:617) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_label_bo:617) igt_vc4-CRITICAL: error: -1 != 0 (vc4_label_bo:617) igt_core-INFO: Stack trace: (vc4_label_bo:617) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (vc4_label_bo:617) igt_core-INFO: #1 [igt_vc4_create_bo+0x9c] (vc4_label_bo:617) igt_core-INFO: #2 [+0xe83f12c0] (vc4_label_bo:617) igt_core-INFO: #3 [+0xe83f0d6c] (vc4_label_bo:617) igt_core-INFO: #4 [__libc_init_first+0x80] (vc4_label_bo:617) igt_core-INFO: #5 [__libc_start_main+0x98] (vc4_label_bo:617) igt_core-INFO: #6 [+0xe83f0db0] **** END **** [1mSubtest set-label: FAIL (0.360s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305831 for randomisation Opened device: /dev/dri/card0 Starting subtest: set-bad-handle [1mSubtest set-bad-handle: SUCCESS (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305831 for randomisation Opened device: /dev/dri/card0 Starting subtest: set-bad-name (vc4_label_bo:623) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_label_bo:623) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_label_bo:623) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_label_bo:623) igt_vc4-CRITICAL: error: -1 != 0 Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 [igt_vc4_create_bo+0x9c] #2 [+0xba6d1234] #3 [+0xba6d0d6c] #4 [__libc_init_first+0x80] #5 [__libc_start_main+0x98] #6 [+0xba6d0db0] Subtest set-bad-name failed. **** DEBUG **** (vc4_label_bo:623) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_label_bo:623) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_label_bo:623) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_label_bo:623) igt_vc4-CRITICAL: error: -1 != 0 (vc4_label_bo:623) igt_core-INFO: Stack trace: (vc4_label_bo:623) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (vc4_label_bo:623) igt_core-INFO: #1 [igt_vc4_create_bo+0x9c] (vc4_label_bo:623) igt_core-INFO: #2 [+0xba6d1234] (vc4_label_bo:623) igt_core-INFO: #3 [+0xba6d0d6c] (vc4_label_bo:623) igt_core-INFO: #4 [__libc_init_first+0x80] (vc4_label_bo:623) igt_core-INFO: #5 [__libc_start_main+0x98] (vc4_label_bo:623) igt_core-INFO: #6 [+0xba6d0db0] **** END **** [1mSubtest set-bad-name: FAIL (0.016s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305831 for randomisation Opened device: /dev/dri/card0 Starting subtest: set-kernel-name (vc4_label_bo:626) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_label_bo:626) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_label_bo:626) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_label_bo:626) igt_<14>[ 134.250815] [IGT] vc4_label_bo: finished subtest set-kernel-name, FAIL vc4-CRIT<14>[ 134.250925] [IGT] vc4_label_bo: exiting, ret=98 ICAL: er<8>[ 134.255571] ror: -1 <8>[ 134.256870] != 0 St<8>[ 134.274432] ack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 [igt_vc4_create_bo+0x9<14>[ 134.289865] [IGT] vc4_lookup_fail: executing c] #2<14>[ 134.290178] [IGT] vc4_lookup_fail: starting subtest bad-color-write [+0xab9011a8] #3 [+0xab900d6c] #4 [__libc_init_first+0x80] #<14>[ 134.308776] [IGT] vc4_lookup_fail: finished subtest bad-color-write, FAIL 5 [__lib<14>[ 134.308915] [IGT] vc4_lookup_fail: exiting, ret=98 c_start_<8>[ 134.313836] main+0x9<8>[ 134.315175] 8] #6<8>[ 134.331712] [+0xab900db0] Subtest set-kernel-name failed.<14>[ 134.348120] [IGT] vc4_mmap: executing **** D<14>[ 134.348468] [IGT] vc4_mmap: starting subtest mmap-bad-handle EBUG ***<14>[ 134.348539] [IGT] vc4_mmap: finished subtest mmap-bad-handle, SUCCESS * (vc4_<14>[ 134.348630] [IGT] vc4_mmap: exiting, ret=0 label_bo<8>[ 134.353466] :626) ig<14>[ 134.373309] [IGT] vc4_mmap: executing t_vc4-CRITICAL: Test assertion failure f<14>[ 134.386286] [IGT] vc4_mmap: starting subtest mmap-bo unction igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_label_bo:626) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_label_bo:626) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_label_bo:626) igt_vc4-CRITICAL: error: -1 != 0 (vc4_label_bo:626) igt_core-INFO: Stack trace: (vc4_label_bo:626) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (vc4_label_bo:626) igt_core-INFO: #1 [igt_vc4_create_bo+0x9c] (vc4_label_bo:626) igt_core-INFO: #2 [+0xab9011a8] (vc4_label_bo:626) igt_core-INFO: #3 [+0xab900d6c] (vc4_label_bo:626) igt_core-INFO: #4 [__libc_init_first+0x80] (vc4_label_bo:626) igt_core-INFO: #5 [__libc_start_main+0x98] (vc4_label_bo:626) igt_core-INFO: #6 [+0xab900db0] **** END **** [1mSubtest set-kernel-name: FAIL (0.361s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305832 for randomisation Opened device: /dev/dri/card0 Starting subtest: bad-color-write (vc4_lookup_fail:632) CRITICAL: Test assertion failure function __igt_unique____real_main28, file ../tests/vc4/vc4_lookup_fail.c:66: (vc4_lookup_fail:632) CRITICAL: Failed assertion: (*__errno_location ()) == 22 (vc4_lookup_fail:632) CRITICAL: Last errno: 19, No such device (vc4_lookup_fail:632) CRITICAL: error: 19 != 22 Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 [+0xcd6f0e84] #2 [+0xcd6f0b6c] #3 [__libc_init_first+0x80] #4 [__libc_start_main+0x98] #5 [+0xcd6f0bb0] Subtest bad-color-write failed. **** DEBUG **** (vc4_lookup_fail:632) CRITICAL: Test assertion failure function __igt_unique____real_main28, file ../tests/vc4/vc4_lookup_fail.c:66: (vc4_lookup_fail:632) CRITICAL: Failed assertion: (*__errno_location ()) == 22 (vc4_lookup_fail:632) CRITICAL: Last errno: 19, No such device (vc4_lookup_fail:632) CRITICAL: error: 19 != 22 (vc4_lookup_fail:632) igt_core-INFO: Stack trace: (vc4_lookup_fail:632) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (vc4_lookup_fail:632) igt_core-INFO: #1 [+0xcd6f0e84] (vc4_lookup_fail:632) igt_core-INFO: #2 [+0xcd6f0b6c] (vc4_lookup_fail:632) igt_core-INFO: #3 [__libc_init_first+0x80] (vc4_lookup_fail:632) igt_core-INFO: #4 [__libc_start_main+0x98] (vc4_lookup_fail:632) igt_core-INFO: #5 [+0xcd6f0bb0] **** END **** [1mSubtest bad-color-write: FAIL (0.019s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305832 for randomisation Opened device: /dev/dri/card0 Starting subtest: mmap-bad-handle [1mSubtest mmap-bad-handle: SUCCESS (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305832 for randomisation Opened device: /dev/dri/card0 Starting subtest: mmap-bo (vc4_mmap:641) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_mmap:641) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_mmap:641) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_mmap:641) igt_vc4-CRITICAL: error: -1 != 0 Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 [igt_vc4_create_bo+0x9c] #2 [+0xdd51122c] #3 [+0xdd510eec] #4 [__libc_init_first+0x80] #5 [__libc_start_main+0x98] #6 [+0xdd510f30] Subtest mmap-bo failed. **** DEBUG **** (vc4_mmap:641) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_mmap:641) igt_vc4-CRITICAL: Failed asse<14>[ 134.739119] [IGT] vc4_mmap: finished subtest mmap-bo, FAIL rtion: i<14>[ 134.739343] [IGT] vc4_mmap: exiting, ret=98 gt_ioctl<8>[ 134.745288] ((fd), (<8>[ 134.746611] (((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0<8>[ 134.767721] x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_mmap:641) igt_vc4-CRITICAL: Last err<8>[ 134.787396] no: 19, No such device (vc4_mmap:641) igt_vc4-CRITICAL: error: -1 != 0 (vc4_mmap:641) igt_core-INFO: Stack trace: (vc4_mmap:6<14>[ 134.804583] [IGT] vc4_purgeable_bo: executing 41) igt_core-INFO: #0 ../lib/igt_core.<14>[ 134.810183] [IGT] vc4_purgeable_bo: exiting, ret=77 c:1989 _<8>[ 134.814954] _igt_fail_assert() (vc4_mmap:641) igt_core-INFO: #1 [igt_vc4_create_b<14>[ 134.830703] [IGT] vc4_purgeable_bo: executing o+0x9c] <14>[ 134.831110] [IGT] vc4_purgeable_bo: exiting, ret=77 (vc4_mm<8>[ 134.836152] ap:641) igt_core<14>[ 134.851895] [IGT] vc4_purgeable_bo: executing -INFO: <14>[ 134.852277] [IGT] vc4_purgeable_bo: exiting, ret=77 #2 [[ 134.857384] known>+0xdd51122c] (vc4_mmap:641) igt_core-INFO: #3 [<14>[ 134.876046] [IGT] vc4_purgeable_bo: executing [ 134.876450] [IGT] vc4_purgeable_bo: exiting, ret=77 >+0xdd51<8>[ 134.881383] 0eec] (vc4_mmap:641) igt_core-INFO: #4 [__lib<14>[ 134.896952] [IGT] vc4_purgeable_bo: executing c_init_f<14>[ 134.897335] [IGT] vc4_purgeable_bo: exiting, ret=77 irst+0x8<8>[ 134.902127] 0] (vc4<14>[ 134.920709] [IGT] vc4_purgeable_bo: executing _mmap:641) igt_core-INFO: #5 [__libc_s<14>[ 134.926564] [IGT] vc4_purgeable_bo: exiting, ret=77 tart_mai<8>[ 134.931215] n+0x98] (vc4_mmap:641) igt_core-INFO: #6 [+0xdd510f3<14>[ 134.946738] [IGT] vc4_purgeable_bo: executing 0] ****<14>[ 134.947104] [IGT] vc4_purgeable_bo: exiting, ret=77 END *<8>[ 134.951505] *** [1mSubtest mmap-bo: FAIL (0.353s)[0m /us<14>[ 134.969344] [IGT] vc4_purgeable_bo: executing r/bin/ig<14>[ 134.969706] [IGT] vc4_purgeable_bo: exiting, ret=77 t-parser<8>[ 134.974099] .sh: 73: vc4_prefmon: not found /usr/bin/igt-pa<14>[ 134.993107] [IGT] vc4_purgeable_bo: executing rser.sh:<14>[ 134.993469] [IGT] vc4_purgeable_bo: exiting, ret=77 83: vc4<8>[ 134.997793] _prefmon<8>[ 134.999067] : not fo<8>[ 135.015557] und WARNING: unhandled exit status: 127 IGT-Version: 1.28-ga44ebfe (aarch64) (<14>[ 135.029211] [IGT] vc4_tiling: executing Linux: 5<14>[ 135.029512] [IGT] vc4_tiling: starting subtest get-bad-handle .10.224-<14>[ 135.029573] [IGT] vc4_tiling: finished subtest get-bad-handle, SUCCESS cip52-rt<14>[ 135.029654] [IGT] vc4_tiling: exiting, ret=0 22 aarch<8>[ 135.034008] 64) Usi<14>[ 135.052512] [IGT] vc4_tiling: executing ng IGT_SRANDOM=1706305832 for ra<14>[ 135.070920] [IGT] vc4_tiling: starting subtest set-bad-handle ndomisation Opened device: /dev/dri/card0 Test requirement not met in function __igt_unique____real_main97, file ../tests/vc4/vc4_purgeable_bo.c:106: Test requirement: igt_vc4_get_param(fd, DRM_VC4_PARAM_SUPPORTS_MADVISE) Last errno: 19, No such device [1mSubtest mark-willneed: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305832 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function __igt_unique____real_main97, file ../tests/vc4/vc4_purgeable_bo.c:106: Test requirement: igt_vc4_get_param(fd, DRM_VC4_PARAM_SUPPORTS_MADVISE) Last errno: 19, No such device [1mSubtest mark-purgeable: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305832 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function __igt_unique____real_main97, file ../tests/vc4/vc4_purgeable_bo.c:106: Test requirement: igt_vc4_get_param(fd, DRM_VC4_PARAM_SUPPORTS_MADVISE) Last errno: 19, No such device [1mSubtest mark-purgeable-twice: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305832 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function __igt_unique____real_main97, file ../tests/vc4/vc4_purgeable_bo.c:106: Test requirement: igt_vc4_get_param(fd, DRM_VC4_PARAM_SUPPORTS_MADVISE) Last errno: 19, No such device [1mSubtest mark-unpurgeable-twice: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305832 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function __igt_unique____real_main97, file ../tests/vc4/vc4_purgeable_bo.c:106: Test requirement: igt_vc4_get_param(fd, DRM_VC4_PARAM_SUPPORTS_MADVISE) Last errno: 19, No such device [1mSubtest access-purgeable-bo-mem: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305832 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function __igt_unique____real_main97, file ../tests/vc4/vc4_purgeable_bo.c:106: Test requirement: igt_vc4_get_param(fd, DRM_VC4_PARAM_SUPPORTS_MADVISE) Last errno: 19, No such device [1mSubtest access-purged-bo-mem: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305832 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function __igt_unique____real_main97, file ../tests/vc4/vc4_purgeable_bo.c:106: Test requirement: igt_vc4_get_param(fd, DRM_VC4_PARAM_SUPPORTS_MADVISE) Last errno: 19, No such device [1mSubtest mark-unpurgeable-check-retained: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305832 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function __igt_unique____real_main97, file ../tests/vc4/vc4_purgeable_bo.c:106: Test requirement: igt_vc4_get_param(fd, DRM_VC4_PARAM_SUPPORTS_MADVISE) Last errno: 19, No such device [1mSubtest mark-unpurgeable-purged: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305832 for randomisation Opened device: /dev/dri/card0 Test requirement not met in function __igt_unique____real_main97, file ../tests/vc4/vc4_purgeable_bo.c:106: Test requirement: igt_vc4_get_param(fd, DRM_VC4_PARAM_SUPPORTS_MADVISE) Last errno: 19, No such device [1mSubtest free-purged-bo: SKIP (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305833 for randomisation Opened device: /dev/dri/card0 <14>[ 135.415302] [IGT] vc4_tiling: finished subtest set-bad-handle, SUCCESS Startin<14>[ 135.415473] [IGT] vc4_tiling: exiting, ret=0 g subtes<8>[ 135.420905] t: get-bad-handle [1mSubtest get-bad-h<14>[ 135.437793] [IGT] vc4_tiling: executing andle: S<14>[ 135.438114] [IGT] vc4_tiling: starting subtest get-bad-flags UCCESS (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IG<14>[ 135.458284] [IGT] vc4_tiling: finished subtest get-bad-flags, FAIL T_SRANDO<14>[ 135.458398] [IGT] vc4_tiling: exiting, ret=98 M=170630<8>[ 135.463053] 5833 for randomisation Opened device: /<14>[ 135.481544] [IGT] vc4_tiling: executing dev/dri/<14>[ 135.481898] [IGT] vc4_tiling: starting subtest set-bad-flags card0 Starting subtest: set-bad-handle [1mSubtest set-bad-handle: SUCCESS (0.000s)[0m IGT-Version: <14>[ 135.502670] [IGT] vc4_tiling: finished subtest set-bad-flags, FAIL 1.28-ga4<14>[ 135.502789] [IGT] vc4_tiling: exiting, ret=98 4ebfe (a<8>[ 135.508197] arch64) (Linux: 5.10.224-cip52-rt22 aarch64) Us<14>[ 135.525234] [IGT] vc4_tiling: executing ing IGT_<14>[ 135.525600] [IGT] vc4_tiling: starting subtest get-bad-modifier SRANDOM=1706305833 for randomisation Opened device: /dev/dri/card0 Starting subtest: get-bad-flags (vc4_tiling:686) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_tiling:686) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_tiling:686) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_tiling:686) igt_vc4-CRITICAL: error: -1 != 0 Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 [igt_vc4_create_bo+0x9c] #2 [+0xc25e1080] #3 [+0xc25e0dac] #4 [__libc_init_first+0x80] #5 [__libc_start_main+0x98] #6 [+0xc25e0df0] Subtest get-bad-flags failed. **** DEBUG **** (vc4_tiling:686) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_tiling:686) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_tiling:686) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_tiling:686) igt_vc4-CRITICAL: error: -1 != 0 (vc4_tiling:686) igt_core-INFO: Stack trace: (vc4_tiling:686) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (vc4_tiling:686) igt_core-INFO: #1 [igt_vc4_create_bo+0x9c] (vc4_tiling:686) igt_core-INFO: #2 [+0xc25e1080] (vc4_tiling:686) igt_core-INFO: #3 [+0xc25e0dac] (vc4_tiling:686) igt_core-INFO: #4 [__libc_init_first+0x80] (vc4_tiling:686) igt_core-INFO: #5 [__libc_start_main+0x98] (vc4_tiling:686) igt_core-INFO: #6 [+0xc25e0df0] **** END **** [1mSubtest get-bad-flags: FAIL (0.020s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305833 for randomisation Opened device: /dev/dri/card0 Starting subtest: set-bad-flags (vc4_tiling:689) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_tiling:689) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_tiling:689) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_tiling:689) igt_vc4-CRITICAL: error: -1 != 0 Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 [igt_vc4_create_bo+0x9c] #2 [+0xbb891138] #3 [+0xbb890dac] #4 [__libc_init_first+0x80] #5 [__libc_start_main+0x98] #6 [+0xbb890df0] Subtest set-bad-flags failed. **** DEBUG **** (vc4_tiling:689) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_tiling:689) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_tiling:689) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_tiling:689) igt_vc4-CRITICAL: error: -1 != 0 (vc4_tiling:689) igt_core-INFO: Stack trace: (vc4_tiling:689) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (vc4_tiling:689) igt_core-INFO: #1 [igt_vc4_create_bo+0x9c] (vc4_tiling:689) igt_core-INFO: #2 [+0xbb891138] (vc4_tiling:689) igt_core-INFO: #3 [+0xbb890dac] (vc4_tiling:689) igt_core-INFO: #4 [__libc_init_first+0x80] (vc4_tiling:689) igt_core-INFO: #5 [__libc_start_main+0x98] (vc4_tiling:689) igt_core-INFO: #6 [+0xbb890df0] **** END **** [1mSubtest set-bad-flags: FAIL (0.021s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305833 for randomisation Opened device:<14>[ 135.886174] [IGT] vc4_tiling: finished subtest get-bad-modifier, FAIL /dev/dr<14>[ 135.886290] [IGT] vc4_tiling: exiting, ret=98 i/card0 <8>[ 135.891330] Starting subtest: get-bad-modifier (vc4_tiling:692) igt_vc4-CRITICAL: Test assertion failure f<14>[ 135.914588] [IGT] vc4_tiling: executing unction <14>[ 135.914932] [IGT] vc4_tiling: starting subtest set-bad-modifier igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_tiling:692) igt_vc4-CRITICAL: Failed<14>[ 135.934441] [IGT] vc4_tiling: finished subtest set-bad-modifier, FAIL asserti<14>[ 135.934550] [IGT] vc4_tiling: exiting, ret=98 on: igt_<8>[ 135.939193] ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('<14>[ 135.956882] [IGT] vc4_tiling: executing d')) << <14>[ 135.957197] [IGT] vc4_tiling: starting subtest set-get (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_tiling:692) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_tiling:692) igt_vc4-CRITICAL: error: -1 != 0 Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 [igt_vc4_create_bo+0x9c] #2 [+0xc3031358] #3 [+0xc3030dac] #4 [__libc_init_first+0x80] #5 [__libc_start_main+0x98] #6 [+0xc3030df0] Subtest get-bad-modifier failed. **** DEBUG **** (vc4_tiling:692) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_tiling:692) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_tiling:692) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_tiling:692) igt_vc4-CRITICAL: error: -1 != 0 (vc4_tiling:692) igt_core-INFO: Stack trace: (vc4_tiling:692) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (vc4_tiling:692) igt_core-INFO: #1 [igt_vc4_create_bo+0x9c] (vc4_tiling:692) igt_core-INFO: #2 [+0xc3031358] (vc4_tiling:692) igt_core-INFO: #3 [+0xc3030dac] (vc4_tiling:692) igt_core-INFO: #4 [__libc_init_first+0x80] (vc4_tiling:692) igt_core-INFO: #5 [__libc_start_main+0x98] (vc4_tiling:692) igt_core-INFO: #6 [+0xc3030df0] **** END **** [1mSubtest get-bad-modifier: FAIL (0.360s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305833 for randomisation Opened device: /dev/dri/card0 Starting subtest: set-bad-modifier (vc4_tiling:695) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_tiling:695) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_tiling:695) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_tiling:695) igt_vc4-CRITICAL: error: -1 != 0 Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 [igt_vc4_create_bo+0x9c] #2 [+0xb43113ec] #3 [+0xb4310dac] #4 [__libc_init_first+0x80] #5 [__libc_start_main+0x98] #6 [+0xb4310df0] Subtest set-bad-modifier failed. **** DEBUG **** (vc4_tiling:695) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_tiling:695) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_tiling:695) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_tiling:695) igt_vc4-CRITICAL: error: -1 != 0 (vc4_tiling:695) igt_core-INFO: Stack trace: (vc4_tiling:695) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (vc4_tiling:695) igt_core-INFO: #1 [igt_vc4_create_bo+0x9c] (vc4_tiling:695) igt_core-INFO: #2 [+0xb43113ec] (vc4_tiling:695) igt_core-INFO: #3 [+0xb4310dac] (vc4_tiling:695) igt_core-INFO: #4 [__libc_init_first+0x80] (vc4_tiling:695) igt_core-INFO: #5 [__libc_start_main+0x98] (vc4_tiling:695) igt_core-INFO: #6 [+0xb4310df0] **** END **** [1mSubtest set-bad-modifier: FAIL (0.019s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305833 for randomisation Opened device: /dev/dri/card0 Starting subtest: set-get (vc4_tiling:698) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_tiling:698) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeo<14>[ 136.316942] [IGT] vc4_tiling: finished subtest set-get, FAIL f(struct<14>[ 136.317061] [IGT] vc4_tiling: exiting, ret=98 drm_vc4<8>[ 136.322115] _create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_tiling:698) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_tiling:<14>[ 136.345388] [IGT] vc4_tiling: executing 698) igt<14>[ 136.345740] [IGT] vc4_tiling: starting subtest get-after-free _vc4-CRITICAL: error: -1 != 0 Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() <14>[ 136.364940] [IGT] vc4_tiling: finished subtest get-after-free, FAIL #1 [igt_<14>[ 136.365051] [IGT] vc4_tiling: exiting, ret=98 vc4_crea<8>[ 136.369639] te_bo+0x<8>[ 136.370926] 9c] #<8>[ 136.388588] 2 [+0xb34814dc] #3 [+0xb3480dac] #4 [__libc_init_first+0x80] #5 [__libc_start_main+0x<14>[ 136.406070] [IGT] vc4_wait_bo: executing 98] #6 [+0xb3480df0] Subtest set-get failed. **** DEBUG **** (vc4_tiling:698) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_tiling:698) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_tiling:698) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_tiling:698) igt_vc4-CRITICAL: error: -1 != 0 (vc4_tiling:698) igt_core-INFO: Stack trace: (vc4_tiling:698) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (vc4_tiling:698) igt_core-INFO: #1 [igt_vc4_create_bo+0x9c] (vc4_tiling:698) igt_core-INFO: #2 [+0xb34814dc] (vc4_tiling:698) igt_core-INFO: #3 [+0xb3480dac] (vc4_tiling:698) igt_core-INFO: #4 [__libc_init_first+0x80] (vc4_tiling:698) igt_core-INFO: #5 [__libc_start_main+0x98] (vc4_tiling:698) igt_core-INFO: #6 [+0xb3480df0] **** END **** [1mSubtest set-get: FAIL (0.360s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305834 for randomisation Opened device: /dev/dri/card0 Starting subtest: get-after-free (vc4_tiling:701) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_tiling:701) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_tiling:701) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_tiling:701) igt_vc4-CRITICAL: error: -1 != 0 Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 [igt_vc4_create_bo+0x9c] #2 [+0xe0681474] #3 [+0xe0680dac] #4 [__libc_init_first+0x80] #5 [__libc_start_main+0x98] #6 [+0xe0680df0] Subtest get-after-free failed. **** DEBUG **** (vc4_tiling:701) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_tiling:701) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_tiling:701) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_tiling:701) igt_vc4-CRITICAL: error: -1 != 0 (vc4_tiling:701) igt_core-INFO: Stack trace: (vc4_tiling:701) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (vc4_tiling:701) igt_core-INFO: #1 [igt_vc4_create_bo+0x9c] (vc4_tiling:701) igt_core-INFO: #2 [+0xe0681474] (vc4_tiling:701) igt_core-INFO: #3 [+0xe0680dac] (vc4_tiling:701) igt_core-INFO: #4 [__libc_init_first+0x80] (vc4_tiling:701) igt_core-INFO: #5 [__libc_start_main+0x98] (vc4_tiling:701) igt_core-INFO: #6 [+0xe0680df0] **** END **** [1mSubtest get-after-free: FAIL (0.019s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305834 for randomisation Opened device: /dev/dri/card0 (vc4_wait_bo:707) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_wait_bo:707) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_wait_bo:707) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_wait_bo:707) igt_vc4-CRITICAL: error: -1 != 0 Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 [igt_vc4_create_bo+0x9c] #2 [+0xb11f149c] #3 [+0xb11f0e2c] #4 [__libc_init_first+0x80] #5 [__libc_start_main+0x98] #6 [+0xb11f0e70] Test vc4_wait_bo failed. **** DEBUG **** (vc4_wait_bo:<14>[ 136.758984] [IGT] vc4_wait_bo: exiting, ret=98 707) igt<8>[ 136.765055] _core-INFO: IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) (<14>[ 136.780270] [IGT] vc4_wait_bo: executing vc4_wait_bo:707) igt_core-INFO: Using IGT_SRANDOM=1706305834 for randomisation (vc4_wait_bo:707) drmtest-DEBUG: Force option us<14>[ 136.795538] [IGT] vc4_wait_bo: exiting, ret=98 ed: Usin<8>[ 136.800283] g driver vc4 (vc4_wait_bo:707) drmtest-INFO: Opened device: /dev/dri/card0 (vc4_wait_b<14>[ 136.816556] [IGT] vc4_wait_bo: executing o:707) drmtest-DEBUG: Test requirement passed: !(fd<0) (vc4_wait_bo:707) DEBUG: Test requirement passed: igt_vc4_is_v3d(fd) (vc4_wait_bo:707) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_wait_bo:707) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_wait_bo:707) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_wait_bo:707) igt_vc4-CRITICAL: error: -1 != 0 (vc4_wait_bo:707) igt_core-INFO: Stack trace: (vc4_wait_bo:707) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (vc4_wait_bo:707) igt_core-INFO: #1 [igt_vc4_create_bo+0x9c] (vc4_wait_bo:707) igt_core-INFO: #2 [+0xb11f149c] (vc4_wait_bo:707) igt_core-INFO: #3 [+0xb11f0e2c] (vc4_wait_bo:707) igt_core-INFO: #4 [__libc_init_first+0x80] (vc4_wait_bo:707) igt_core-INFO: #5 [__libc_start_main+0x98] (vc4_wait_bo:707) igt_core-INFO: #6 [+0xb11f0e70] **** END **** [1mSubtest bad-bo: FAIL (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305834 for randomisation Opened device: /dev/dri/card0 (vc4_wait_bo:710) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_wait_bo:710) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_wait_bo:710) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_wait_bo:710) igt_vc4-CRITICAL: error: -1 != 0 Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 [igt_vc4_create_bo+0x9c] #2 [+0xcc81149c] #3 [+0xcc810e2c] #4 [__libc_init_first+0x80] #5 [__libc_start_main+0x98] #6 [+0xcc810e70] Test vc4_wait_bo failed. **** DEBUG **** (vc4_wait_bo:710) igt_core-INFO: IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) (vc4_wait_bo:710) igt_core-INFO: Using IGT_SRANDOM=1706305834 for randomisation (vc4_wait_bo:710) drmtest-DEBUG: Force option used: Using driver vc4 (vc4_wait_bo:710) drmtest-INFO: Opened device: /dev/dri/card0 (vc4_wait_bo:710) drmtest-DEBUG: Test requirement passed: !(fd<0) (vc4_wait_bo:710) DEBUG: Test requirement passed: igt_vc4_is_v3d(fd) (vc4_wait_bo:710) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_wait_bo:710) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_wait_bo:710) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_wait_bo:710) igt_vc4-CRITICAL: error: -1 != 0 (vc4_wait_bo:710) igt_core-INFO: Stack trace: (vc4_wait_bo:710) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (vc4_wait_bo:710) igt_core-INFO: #1 [igt_vc4_create_bo+0x9c] (vc4_wait_bo:710) igt_core-INFO: #2 [+0xcc81149c] (vc4_wait_bo:710) igt_core-INFO: #3 [+0xcc810e2c] (vc4_wait_bo:710) igt_core-INFO: #4 [__libc_init_first+0x80] (vc4_wait_bo:710) igt_core-INFO: #5 [__libc_start_main+0x98] (vc4_wait_bo:710) igt_core-INFO: #6 [+0xcc810e70] **** END **** [1mSubtest bad-pad: FAIL (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305834 for randomisation Opened device: /dev/dri/card0 (vc4_wait_bo:713) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_wait_bo:713) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)<14>[ 137.171166] [IGT] vc4_wait_bo: exiting, ret=98 ))), (&c<8>[ 137.175971] reate)) == 0 (vc4_wait_bo:713) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_wait_bo:713) igt_vc4-CRITICAL: error: -1 <14>[ 137.196424] [IGT] vc4_wait_bo: executing != 0 Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 [igt_vc4_create_bo+0x9c] #2 [+0xd6ba149c] #3 [<<14>[ 137.212428] [IGT] vc4_wait_bo: exiting, ret=98 unknown><8>[ 137.217153] +0xd6ba0e2c] #4 [__libc_init_first+0x80] #5 [__libc_start_main+0x98] #6 [+0xd6ba0e70] Test vc4_wait_bo failed<14>[ 137.232923] [IGT] vc4_wait_bo: executing . **** DEBUG **** (vc4_wait_bo:713) igt_core-INFO: IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) (vc4_wait_bo:713) igt_core-INFO: Using IGT_SRANDOM=1706305834 for randomisation (vc4_wait_bo:713) drmtest-DEBUG: Force option used: Using driver vc4 (vc4_wait_bo:713) drmtest-INFO: Opened device: /dev/dri/card0 (vc4_wait_bo:713) drmtest-DEBUG: Test requirement passed: !(fd<0) (vc4_wait_bo:713) DEBUG: Test requirement passed: igt_vc4_is_v3d(fd) (vc4_wait_bo:713) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_wait_bo:713) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_wait_bo:713) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_wait_bo:713) igt_vc4-CRITICAL: error: -1 != 0 (vc4_wait_bo:713) igt_core-INFO: Stack trace: (vc4_wait_bo:713) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (vc4_wait_bo:713) igt_core-INFO: #1 [igt_vc4_create_bo+0x9c] (vc4_wait_bo:713) igt_core-INFO: #2 [+0xd6ba149c] (vc4_wait_bo:713) igt_core-INFO: #3 [+0xd6ba0e2c] (vc4_wait_bo:713) igt_core-INFO: #4 [__libc_init_first+0x80] (vc4_wait_bo:713) igt_core-INFO: #5 [__libc_start_main+0x98] (vc4_wait_bo:713) igt_core-INFO: #6 [+0xd6ba0e70] **** END **** [1mSubtest unused-bo-0ns: FAIL (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305835 for randomisation Opened device: /dev/dri/card0 (vc4_wait_bo:716) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_wait_bo:716) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_wait_bo:716) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_wait_bo:716) igt_vc4-CRITICAL: error: -1 != 0 Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 [igt_vc4_create_bo+0x9c] #2 [+0xca88149c] #3 [+0xca880e2c] #4 [__libc_init_first+0x80] #5 [__libc_start_main+0x98] #6 [+0xca880e70] Test vc4_wait_bo failed. **** DEBUG **** (vc4_wait_bo:716) igt_core-INFO: IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) (vc4_wait_bo:716) igt_core-INFO: Using IGT_SRANDOM=1706305835 for randomisation (vc4_wait_bo:716) drmtest-DEBUG: Force option used: Using driver vc4 (vc4_wait_bo:716) drmtest-INFO: Opened device: /dev/dri/card0 (vc4_wait_bo:716) drmtest-DEBUG: Test requirement passed: !(fd<0) (vc4_wait_bo:716) DEBUG: Test requirement passed: igt_vc4_is_v3d(fd) (vc4_wait_bo:716) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_wait_bo:716) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_wait_bo:716) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_wait_bo:716) igt_vc4-CRITICAL: error: -1 != 0 (vc4_wait_bo:716) igt_core-INFO: Stack trace: (vc4_wait_bo:716) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (vc4_wait_bo:716) igt_core-INFO: #1 [igt_vc4_create_bo+0x9c] (vc4_wait_bo:716) igt_core-INFO: #2 [+0xca88149c] (vc4_wait_bo:716) igt_core-INFO: #3 [+0xca880e2c] (vc4_wait_bo:716) igt_core-INFO: #4 [__libc_init_first+0x80] (vc4_wait_bo:716) igt_core-INFO: #5 [__libc_start_main+0x98] (vc4_wait_bo:716) igt_core-INFO: #6 [+0xca880e70] **** END **** [1mSubtest unused-bo-1ns: FAIL (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-c<14>[ 137.587970] [IGT] vc4_wait_bo: exiting, ret=98 ip52-rt2<8>[ 137.593070] 2 aarch64) Using IGT_SRANDOM=1706305835 for randomisation Opened device: /dev/dri/card0 (vc4_wait_bo:719) igt_vc4-CRITICAL: T<14>[ 137.612491] [IGT] vc4_wait_bo: executing est assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_wait_bo:719) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_wait_bo:719) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_wait_bo:719) igt_vc4-CRITICAL: error: -1 != 0 Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 [igt_vc4_create_bo+0x9c] #2 [+0xe6bc149c] #3 [+0xe6bc0e2c] #4 [__libc_init_first+0x80] #5 [__libc_start_main+0x98] #6 [+0xe6bc0e70] Test vc4_wait_bo failed. **** DEBUG **** (vc4_wait_bo:719) igt_core-INFO: IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) (vc4_wait_bo:719) igt_core-INFO: Using IGT_SRANDOM=1706305835 for randomisation (vc4_wait_bo:719) drmtest-DEBUG: Force option used: Using driver vc4 (vc4_wait_bo:719) drmtest-INFO: Opened device: /dev/dri/card0 (vc4_wait_bo:719) drmtest-DEBUG: Test requirement passed: !(fd<0) (vc4_wait_bo:719) DEBUG: Test requirement passed: igt_vc4_is_v3d(fd) (vc4_wait_bo:719) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_wait_bo:719) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_wait_bo:719) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_wait_bo:719) igt_vc4-CRITICAL: error: -1 != 0 (vc4_wait_bo:719) igt_core-INFO: Stack trace: (vc4_wait_bo:719) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (vc4_wait_bo:719) igt_core-INFO: #1 [igt_vc4_create_bo+0x9c] (vc4_wait_bo:719) igt_core-INFO: #2 [+0xe6bc149c] (vc4_wait_bo:719) igt_core-INFO: #3 [+0xe6bc0e2c] (vc4_wait_bo:719) igt_core-INFO: #4 [__libc_init_first+0x80] (vc4_wait_bo:719) igt_core-INFO: #5 [__libc_start_main+0x98] (vc4_wait_bo:719) igt_core-INFO: #6 [+0xe6bc0e70] **** END **** [1mSubtest used-bo-0ns: FAIL (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305835 for randomisation Opened device: /dev/dri/card0 (vc4_wait_bo:722) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_wait_bo:722) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_wait_bo:722) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_wait_bo:722) igt_vc4-CRITICAL: error: -1 != 0 Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 [igt_vc4_create_bo+0x9c] #2 [+0xe799149c] #3 [+0xe7990e2c] #4 [__libc_init_first+0x80] #5 [__libc_start_main+0x98] #6 [+0xe7990e70] Test vc4_wait_bo failed. **** DEBUG **** (vc4_wait_bo:722) igt_core-INFO: IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) (vc4_wait_bo:722) igt_core-INFO: Using IGT_SRANDOM=1706305835 for randomisation (vc4_wait_bo:722) drmtest-DEBUG: Force option used: Using driver vc4 (vc4_wait_bo:722) drmtest-INFO: Opened device: /dev/dri/card0 (vc4_wait_bo:722) drmtest-DEBUG: Test requirement passed: !(fd<0) (vc4_wait_bo:722) DEBUG: Test requirement passed: igt_vc4_is_v3d(fd) (vc4_wait_bo:722) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_wait_bo:722) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_wait_bo:722) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_wait_bo:722) igt_vc4-CRITICAL: error<14>[ 137.966716] [IGT] vc4_wait_bo: exiting, ret=98 : -1 != <8>[ 137.972766] 0 (vc4_wait_bo:722) igt_core-INFO: Stack trace: (vc4_wait_bo:722) igt_core-INF<14>[ 137.988469] [IGT] vc4_wait_bo: executing O: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (vc4_wait_bo:722) igt_core-INFO: #1 [igt_vc4_create_bo+0x9c] (vc4_wait_bo:722) ig<14>[ 138.004323] [IGT] vc4_wait_bo: exiting, ret=98 t_core-I<8>[ 138.009144] NFO: #<8>[ 138.010512] 2 [+0xe799149c] (vc4_wait_bo:722) igt_core-INFO: #3 [+0xe7990e2c] (vc4_wait_bo:722) igt_core-INFO: #4 [_<8>[ 138.029964] _libc_init_first+0x80] (vc4_wait_bo:722) igt_core-INFO: #5 [__libc_start_main+0x98] (vc4_wait_bo:722) igt_core-INFO:<14>[ 138.047234] [IGT] vc4_wait_seqno: executing #6 [<<14>[ 138.047595] [IGT] vc4_wait_seqno: starting subtest bad-seqno-0ns unknown><14>[ 138.047671] [IGT] vc4_wait_seqno: finished subtest bad-seqno-0ns, SUCCESS +0xe7990<14>[ 138.047766] [IGT] vc4_wait_seqno: exiting, ret=0 e70] **<8>[ 138.052827] ** END <14>[ 138.075151] [IGT] vc4_wait_seqno: executing **** <14>[ 138.088473] [IGT] vc4_wait_seqno: starting subtest bad-seqno-1ns [1mSubte<1>[ 138.088514] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 st used-<1>[ 138.105174] Mem abort info: bo-1ns: <1>[ 138.108966] ESR = 0x96000044 FAIL (0.<1>[ 138.113021] EC = 0x25: DABT (current EL), IL = 32 bits 000s)[0<1>[ 138.119368] SET = 0, FnV = 0 m IGT-V<1>[ 138.123423] EA = 0, S1PTW = 0 ersion: <1>[ 138.127567] Data abort info: 1.28-ga4<1>[ 138.131445] ISV = 0, ISS = 0x00000044 4ebfe (a<1>[ 138.136293] CM = 0, WnR = 1 arch64) <1>[ 138.140261] user pgtable: 4k pages, 48-bit VAs, pgdp=00000000517f2000 (Linux: <1>[ 138.147753] [0000000000000008] pgd=0000000000000000, p4d=0000000000000000 5.10.224<0>[ 138.155599] Internal error: Oops: 0000000096000044 [#1] PREEMPT SMP -cip52-r<4>[ 138.162916] Modules linked in: raspberrypi_cpufreq hci_uart btqca brcmfmac btbcm brcmutil bluetooth clk_raspberrypi crct10dif_ce raspberrypi_hwmon ecdh_generic ecc cfg80211 rfkill vc4 iproc_rng200 cec pcie_brcmstb rng_core broadcom bcm_phy_lib bcm2711_thermal pwm_bcm2835 i2c_bcm2835 drm_kms_helper genet mdio_bcm_unimac drm dm_mod ip_tables x_tables ipv6 t22 aarc<4>[ 138.195614] CPU: 3 PID: 734 Comm: vc4_wait_seqno Not tainted 5.10.224-cip52-rt22 #1 h64) Us<4>[ 138.204339] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) ing IGT_<4>[ 138.211215] pstate: 60000085 (nZCv daIf -PAN -UAO -TCO BTYPE=--) SRANDOM=<4>[ 138.218267] pc : prepare_to_wait+0x74/0x84 17063058<4>[ 138.223379] lr : prepare_to_wait+0x34/0x84 35 for r<4>[ 138.228492] sp : ffff800016283bc0 andomisa<4>[ 138.232811] x29: ffff800016283bc0 x28: ffff800016283d88 tion Op<4>[ 138.239158] x27: 0000000000000010 x26: 0000000000000001 ened dev<4>[ 138.245505] x25: ffff321d8f50b858 x24: ffff321d917fab80 ice: /de<4>[ 138.251853] x23: ffffd6c93e1b7000 x22: ffff800016283c68 v/dri/ca<4>[ 138.258199] x21: ffff321d8f50b858 x20: 0000000000000001 rd0 (vc<4>[ 138.264546] x19: ffff800016283c50 x18: 0000000000000000 4_wait_b<4>[ 138.270894] x17: 0000000000000000 x16: ffffd6c93c6d42c0 o:725) i<4>[ 138.277240] x15: 0000ffffc549c630 x14: 0000000000000000 gt_vc4-C<4>[ 138.283586] x13: 0000000000000000 x12: 0000000000000000 RITICAL:<4>[ 138.289932] x11: 0000000000000000 x10: 0000000000000000 Test as<4>[ 138.296279] x9 : ffffd6c8e7ff2000 x8 : 0000000000000001 sertion <4>[ 138.302626] x7 : ffffffffffffffff x6 : ffff800016283d98 failure <4>[ 138.308973] x5 : 000000000006cd64 x4 : 0000000000000000 function<4>[ 138.315320] x3 : ffff321d8f50b858 x2 : 0000000000000000 igt_vc4<4>[ 138.321666] x1 : 0000000000000000 x0 : ffff321d8f50b860 _create_<4>[ 138.328012] Call trace: bo, file<4>[ 138.331451] prepare_to_wait+0x74/0x84 ../lib/<4>[ 138.336210] vc4_wait_for_seqno+0xe0/0x19c [vc4] igt_vc4.<4>[ 138.341856] vc4_wait_seqno_ioctl+0x30/0xa4 [vc4] c:126: <4>[ 138.347585] drm_ioctl_kernel+0xc8/0x120 [drm] (vc4_wai<4>[ 138.353050] drm_ioctl+0x230/0x48c [drm] t_bo:725<4>[ 138.357987] __arm64_sys_ioctl+0xac/0xf0 ) igt_vc<4>[ 138.362923] el0_svc_common.constprop.0+0x78/0x1c4 4-CRITIC<4>[ 138.368741] do_el0_svc+0x24/0x9c AL: Fail<4>[ 138.373061] el0_svc+0x10/0x20 ed asser<4>[ 138.377116] el0_sync_handler+0xe8/0x114 tion: ig<4>[ 138.382052] el0_sync+0x180/0x1c0 t_ioctl(<0>[ 138.386377] Code: d50323bf d65f03c0 aa1503e0 f8408c02 (f9000456) (fd), ((<4>[ 138.393515] ---[ end trace 202f9e0a0d6d843e ]--- ((2U|1U)<6>[ 138.399315] note: vc4_wait_seqno[734] exited with preempt_count 1 << (((0<6>[ 138.406340] printk: console [ttyS1]: printing thread stopped +8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_wait_bo:725) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_wait_bo:725) igt_vc4-CRITICAL: error: -1 != 0 Stack trace: #0 ../lib/igt_core.c:1989 __igt_fail_assert() #1 [igt_vc4_create_bo+0x9c] #2 [+0xe429149c] #3 [+0xe4290e2c] #4 [__libc_init_first+0x80] #5 [__libc_start_main+0x98] #6 [+0xe4290e70] Test vc4_wait_bo failed. **** DEBUG **** (vc4_wait_bo:725) igt_core-INFO: IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) (vc4_wait_bo:725) igt_core-INFO: Using IGT_SRANDOM=1706305835 for randomisation (vc4_wait_bo:725) drmtest-DEBUG: Force option used: Using driver vc4 (vc4_wait_bo:725) drmtest-INFO: Opened device: /dev/dri/card0 (vc4_wait_bo:725) drmtest-DEBUG: Test requirement passed: !(fd<0) (vc4_wait_bo:725) DEBUG: Test requirement passed: igt_vc4_is_v3d(fd) (vc4_wait_bo:725) igt_vc4-CRITICAL: Test assertion failure function igt_vc4_create_bo, file ../lib/igt_vc4.c:126: (vc4_wait_bo:725) igt_vc4-CRITICAL: Failed assertion: igt_ioctl((fd), ((((2U|1U) << (((0+8)+8)+14)) | ((('d')) << (0+8)) | (((0x40 + 0x03)) << 0) | ((((sizeof(struct drm_vc4_create_bo)))) << ((0+8)+8)))), (&create)) == 0 (vc4_wait_bo:725) igt_vc4-CRITICAL: Last errno: 19, No such device (vc4_wait_bo:725) igt_vc4-CRITICAL: error: -1 != 0 (vc4_wait_bo:725) igt_core-INFO: Stack trace: (vc4_wait_bo:725) igt_core-INFO: #0 ../lib/igt_core.c:1989 __igt_fail_assert() (vc4_wait_bo:725) igt_core-INFO: #1 [igt_vc4_create_bo+0x9c] (vc4_wait_bo:725) igt_core-INFO: #2 [+0xe429149c] (vc4_wait_bo:725) igt_core-INFO: #3 [+0xe4290e2c] (vc4_wait_bo:725) igt_core-INFO: #4 [__libc_init_first+0x80] (vc4_wait_bo:725) igt_core-INFO: #5 [__libc_start_main+0x98] (vc4_wait_bo:725) igt_core-INFO: #6 [+0xe4290e70] **** END **** [1mSubtest used-bo: FAIL (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305836 for randomisation Opened device: /dev/dri/card0 Starting subtest: bad-seqno-0ns [1mSubtest bad-seqno-0ns: SUCCESS (0.000s)[0m IGT-Version: 1.28-ga44ebfe (aarch64) (Linux: 5.10.224-cip52-rt22 aarch64) Using IGT_SRANDOM=1706305836 for randomisation Opened device: /dev/dri/card0 Starting subtest: bad-seqno-1ns Segmentation fault WARNING: unhandled exit status: 139 + set +x / #