Trying 127.0.0.1... Connected to 127.0.0.1. Escape character is '^]'. U-Boot SPL 2018.03-mx6+g9879e5c (Jun 27 2019 - 15:24:32 +0000) Part number: VSM-DT6-302 Assembly: AS170013251 Date of production: 2017Aug20 Trying to boot from MMC1 MMC Boot Device: mmc0 (SD) U-Boot 2018.03-mx6+g9879e5c (Jun 27 2019 - 15:24:32 +0000) CPU: Freescale i.MX6Q rev1.3 at 792MHz CPU: Extended Commercial temperature grade (-20C to 105C) at 35C Reset cause: POR Board: Variscite DART-MX6 I2C: ready DRAM: 1 GiB PMIC: PFUZE100 ID=0x10 MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... OK auto-detected panel VAR-WVGA Display: VAR-WVGA (800x480) In: serial Out: serial Err: serial switch to partitions #0, OK mmc0 is current device eMMC: 7.3 GiB Net: using phy at 7 got MAC0 address from fuse: f8:dc:7a:10:9b:1e FEC [PRIME] Normal Boot Hit any key to stop autoboot: 10  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.. done BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 10.201.4.154 (260 ms) => setenv serverip 10.201.1.11 setenv serverip 10.201.1.11 => tftp 0x12000000 2133522/tftp-deploy-69p20zsm/kernel/zImage tftp 0x12000000 2133522/tftp-deploy-69p20zsm/kernel/zImage Using FEC device TFTP from server 10.201.1.11; our IP address is 10.201.4.154 Filename '2133522/tftp-deploy-69p20zsm/kernel/zImage'. Load address: 0x12000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ## 3.4 MiB/s done Bytes transferred = 10515168 (a072e0 hex) => tftp 0x18100000 2133522/tftp-deploy-69p20zsm/ramdisk/ramdisk.cpio.gz.uboot tftp 0x18100000 2133522/tftp-deploy-69p20zsm/ramdisk/ramdisk.cpio.gz.uboot Using FEC device TFTP from server 10.201.1.11; our IP address is 10.201.4.154 Filename '2133522/tftp-deploy-69p20zsm/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x18100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ########################################### 3.8 MiB/s done Bytes transferred = 10161743 (9b0e4f hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x18000000 2133522/tftp-deploy-69p20zsm/dtb/imx6q-var-dt6customboard.dtb tftp 0x18000000 2133522/tftp-deploy-69p20zsm/dtb/imx6q-var-dt6customboard.dtb Using FEC device TFTP from server 10.201.1.11; our IP address is 10.201.4.154 Filename '2133522/tftp-deploy-69p20zsm/dtb/imx6q-var-dt6customboard.dtb'. Load address: 0x18000000 Loading: *### 3.3 MiB/s done Bytes transferred = 41057 (a061 hex) => setenv bootargs 'console=ttymxc0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' setenv bootargs 'console=ttymxc0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' => bootz 0x12000000 0x18100000 0x18000000 bootz 0x12000000 0x18100000 0x18000000 ## Loading init Ramdisk from Legacy Image at 18100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 10161679 Bytes = 9.7 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 18000000 Booting using the fdt blob at 0x18000000 Using Device Tree in place at 18000000, end 1800d060 switch to ldo_bypass mode! Starting kernel ... <6>[ 0.000000] Booting Linux on physical CPU 0x0 <5>[ 0.000000] Linux version 5.10.125-cip10 (KernelCI@build-j267449-arm-gcc-10-imx-v6-v7-defconfig-9wlqv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Tue Jun 28 03:19:52 UTC 2022 <6>[ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d <6>[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache <6>[ 0.000000] OF: fdt: Machine model: Variscite DART-MX6 Carrier-board <4>[ 0.000000] Malformed early option 'earlycon' <6>[ 0.000000] Memory policy: Data cache writealloc <6>[ 0.000000] cma: Reserved 64 MiB at 0x4c000000 <6>[ 0.000000] Zone ranges: <6>[ 0.000000] Normal [mem 0x0000000010000000-0x000000003fffffff] <6>[ 0.000000] HighMem [mem 0x0000000040000000-0x000000004fffffff] <6>[ 0.000000] Movable zone start for each node <6>[ 0.000000] Early memory node ranges <6>[ 0.000000] node 0: [mem 0x0000000010000000-0x000000004fffffff] <6>[ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000004fffffff] <6>[ 0.000000] percpu: Embedded 20 pages/cpu s51884 r8192 d21844 u81920 <6>[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260608 <5>[ 0.000000] Kernel command line: console=ttymxc0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 933428K/1048576K available (14336K kernel code, 2022K rwdata, 4840K rodata, 1024K init, 6661K bss, 49612K reserved, 65536K cma-reserved, 196608K highmem) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 <6>[ 0.000000] Running RCU self tests <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU lockdep checking is enabled. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] L2C-310 errata 752271 769419 enabled <6>[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 <6>[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 <6>[ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines <6>[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled <6>[ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB <6>[ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76470001 <4>[ 0.000000] ccm: ldb_di0_sel already changed from reset value: 1 <4>[ 0.000000] ccm: ldb_di1_sel already changed from reset value: 1 <6>[ 0.000000] Switching to timer-based delay loop, resolution 333ns <6>[ 0.000010] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns <6>[ 0.000043] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns <6>[ 0.001780] Console: colour dummy device 80x30 <4>[ 0.001832] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <4>[ 0.001857] ... MAX_LOCKDEP_SUBCLASSES: 8 <4>[ 0.001881] ... MAX_LOCK_DEPTH: 48 <4>[ 0.001904] ... MAX_LOCKDEP_KEYS: 8192 <4>[ 0.001926] ... CLASSHASH_SIZE: 4096 <4>[ 0.001949] ... MAX_LOCKDEP_ENTRIES: 32768 <4>[ 0.001971] ... MAX_LOCKDEP_CHAINS: 65536 <4>[ 0.001993] ... CHAINHASH_SIZE: 32768 <4>[ 0.002016] memory used by lock dependency info: 4061 kB <4>[ 0.002039] memory used for stack traces: 2112 kB <4>[ 0.002062] per task-struct memory footprint: 1536 bytes <6>[ 0.002185] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) <6>[ 0.002230] pid_max: default: 32768 minimum: 301 <6>[ 0.002630] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.002679] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.006258] CPU: Testing write buffer coherency: ok <6>[ 0.006394] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.007480] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 <6>[ 0.010822] Setting up static identity map for 0x10100000 - 0x10100078 <6>[ 0.011585] rcu: Hierarchical SRCU implementation. <6>[ 0.014217] smp: Bringing up secondary CPUs ... <6>[ 0.017629] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 <6>[ 0.017646] CPU1: Spectre v2: using BPIALL workaround <6>[ 0.021988] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 <6>[ 0.022003] CPU2: Spectre v2: using BPIALL workaround <6>[ 0.025360] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 <6>[ 0.025374] CPU3: Spectre v2: using BPIALL workaround <6>[ 0.026117] smp: Brought up 1 node, 4 CPUs <6>[ 0.026156] SMP: Total of 4 processors activated (24.00 BogoMIPS). <6>[ 0.026189] CPU: All CPU(s) started in SVC mode. <6>[ 0.029084] devtmpfs: initialized <6>[ 0.074254] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 <6>[ 0.077227] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.077319] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) <6>[ 0.081687] pinctrl core: initialized pinctrl subsystem <6>[ 0.088594] NET: Registered protocol family 16 <6>[ 0.118213] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.124232] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.124866] cpuidle: using governor menu <6>[ 0.125072] CPU identified as i.MX6Q, silicon rev 1.5 <6>[ 0.619086] vdd1p1: supplied by regulator-dummy <6>[ 0.643300] vdd3p0: supplied by regulator-dummy <6>[ 0.666454] vdd2p5: supplied by regulator-dummy <3>[ 0.689739] vddarm: bypassed regulator has no supply! <3>[ 0.689796] vddarm: failed to get the current voltage: -EPROBE_DEFER <3>[ 0.735127] vddsoc: bypassed regulator has no supply! <3>[ 0.735168] vddsoc: failed to get the current voltage: -EPROBE_DEFER <6>[ 1.736655] No ATAGs? <6>[ 1.737274] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. <6>[ 1.737385] hw-breakpoint: maximum watchpoint size is 4 bytes. <6>[ 1.743507] imx6q-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver <6>[ 1.872715] mxs-dma 110000.dma-apbh: initialized <6>[ 1.883533] vgaarb: loaded <5>[ 1.886024] SCSI subsystem initialized <6>[ 1.887993] usbcore: registered new interface driver usbfs <6>[ 1.888285] usbcore: registered new interface driver hub <6>[ 1.888484] usbcore: registered new device driver usb <4>[ 1.888959] usb_phy_generic usbphynop1: supply vcc not found, using dummy regulator <4>[ 1.889993] usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests <4>[ 1.890490] usb_phy_generic usbphynop2: supply vcc not found, using dummy regulator <4>[ 1.891277] usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests <6>[ 1.895799] i2c i2c-0: IMX I2C adapter registered <6>[ 1.909827] i2c i2c-1: IMX I2C adapter registered <6>[ 1.914174] i2c i2c-2: IMX I2C adapter registered <6>[ 1.915162] mc: Linux media interface: v0.10 <6>[ 1.915343] videodev: Linux video capture interface: v2.00 <6>[ 1.916104] pps_core: LinuxPPS API ver. 1 registered <6>[ 1.916142] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 1.916229] PTP clock support registered <6>[ 1.918407] Advanced Linux Sound Architecture Driver Initialized. <6>[ 1.923803] Bluetooth: Core ver 2.22 <6>[ 1.923969] NET: Registered protocol family 31 <6>[ 1.924004] Bluetooth: HCI device and connection manager initialized <6>[ 1.924149] Bluetooth: HCI socket layer initialized <6>[ 1.924204] Bluetooth: L2CAP socket layer initialized <6>[ 1.924395] Bluetooth: SCO socket layer initialized <6>[ 1.927364] clocksource: Switched to clocksource mxc_timer1 <5>[ 3.372959] VFS: Disk quotas dquot_6.6.0 <6>[ 3.373203] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) <6>[ 3.412569] NET: Registered protocol family 2 <6>[ 3.413452] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 3.417023] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 22528 bytes, linear) <6>[ 3.417784] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 3.417992] TCP bind hash table entries: 8192 (order: 6, 327680 bytes, linear) <6>[ 3.419244] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 3.420136] UDP hash table entries: 512 (order: 3, 49152 bytes, linear) <6>[ 3.420384] UDP-Lite hash table entries: 512 (order: 3, 49152 bytes, linear) <6>[ 3.421210] NET: Registered protocol family 1 <6>[ 3.424176] RPC: Registered named UNIX socket transport module. <6>[ 3.424296] RPC: Registered udp transport module. <6>[ 3.424333] RPC: Registered tcp transport module. <6>[ 3.424367] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 3.426343] PCI: CLS 0 bytes, default 64 <6>[ 3.428155] Trying to unpack rootfs image as initramfs... <6>[ 4.669823] Freeing initrd memory: 9924K <4>[ 4.671589] hw perfevents: no interrupt-affinity property for /pmu, guessing. <6>[ 4.672743] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available <5>[ 4.680565] Initialise system trusted keyrings <6>[ 4.681521] workingset: timestamp_bits=30 max_order=18 bucket_order=0 <5>[ 4.709783] NFS: Registering the id_resolver key type <5>[ 4.709998] Key type id_resolver registered <5>[ 4.710121] Key type id_legacy registered <6>[ 4.710519] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 4.710644] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <6>[ 4.710853] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. <6>[ 4.713068] fuse: init (API version 7.32) <5>[ 4.806881] Key type asymmetric registered <5>[ 4.807076] Asymmetric key parser 'x509' registered <6>[ 4.807532] bounce: pool size: 64 pages <6>[ 4.807709] io scheduler mq-deadline registered <6>[ 4.807747] io scheduler kyber registered <4>[ 4.818107] pwm-backlight backlight: supply power not found, using dummy regulator <4>[ 4.838959] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 <4>[ 4.839089] imx-sdma 20ec000.sdma: Falling back to sysfs fallback for: imx/sdma/sdma-imx6q.bin <6>[ 4.852364] pfuze100-regulator 1-0008: Full layer: 2, Metal layer: 1 <6>[ 4.853349] pfuze100-regulator 1-0008: FAB: 0, FIN: 0 <6>[ 4.853389] pfuze100-regulator 1-0008: pfuze100 found. <6>[ 4.883579] VGEN6: Bringing 3300000uV into 2800000-2800000uV <6>[ 4.892346] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 33, base_baud = 5000000) is a IMX <6>[ 5.884826] printk: console [ttymxc0] enabled <6>[ 5.896231] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 77, base_baud = 5000000) is a IMX <6>[ 5.906123] serial serial0: tty port ttymxc1 registered <6>[ 5.914647] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 78, base_baud = 5000000) is a IMX <6>[ 5.958771] imx-ipuv3 2400000.ipu: IPUv3H probed <6>[ 5.973896] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_crtc_ops) <6>[ 5.982306] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_crtc_ops) <6>[ 5.990614] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops ipu_crtc_ops) <6>[ 5.998889] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops ipu_crtc_ops) <6>[ 6.008227] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with HDCP (DWC HDMI 3D TX PHY) <6>[ 6.025766] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops) <6>[ 6.034398] imx-drm display-subsystem: bound ldb (ops imx_ldb_ops) <6>[ 6.045940] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 0 <6>[ 6.111542] Console: switching to colour frame buffer device 100x30 <6>[ 6.130713] imx-drm display-subsystem: [drm] fb0: imx-drmdrmfb frame buffer device <6>[ 6.139323] imx-ipuv3 2800000.ipu: IPUv3H probed <6>[ 6.183559] brd: module loaded <6>[ 6.238775] loop: module loaded <6>[ 6.263842] CAN device driver interface <6>[ 6.281045] pps pps0: new PPS source ptp0 <6>[ 6.331278] fec 2188000.ethernet eth0: registered PHC device 0 <6>[ 6.341147] usbcore: registered new interface driver r8152 <6>[ 6.347067] usbcore: registered new interface driver lan78xx <6>[ 6.353282] usbcore: registered new interface driver asix <6>[ 6.359157] usbcore: registered new interface driver ax88179_178a <6>[ 6.365674] usbcore: registered new interface driver cdc_ether <6>[ 6.372052] usbcore: registered new interface driver smsc95xx <6>[ 6.378258] usbcore: registered new interface driver net1080 <6>[ 6.384325] usbcore: registered new interface driver cdc_subset <6>[ 6.390700] usbcore: registered new interface driver zaurus <6>[ 6.396681] usbcore: registered new interface driver MOSCHIP usb-ethernet driver <6>[ 6.404633] usbcore: registered new interface driver cdc_ncm <6>[ 6.410635] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>[ 6.417498] ehci-pci: EHCI PCI platform driver <6>[ 6.422361] ehci-mxc: Freescale On-Chip EHCI Host driver <6>[ 6.429256] usbcore: registered new interface driver usb-storage <4>[ 6.448982] edt_ft5x06 2-0038: supply vcc not found, using dummy regulator <4>[ 6.459170] rtc-ds1307 2-0068: SET TIME! <6>[ 6.470118] rtc-ds1307 2-0068: registered as rtc0 <6>[ 6.477794] rtc-ds1307 2-0068: setting system clock to 2000-01-01T00:02:14 UTC (946684934) <6>[ 6.478179] input: generic ft5x06 (79) as /devices/platform/soc/2100000.bus/21a8000.i2c/i2c-2/2-0038/input/input0 <6>[ 6.494423] snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc1 <6>[ 6.503970] i2c /dev entries driver <6>[ 6.524459] Bluetooth: HCI UART driver ver 2.3 <6>[ 6.529288] Bluetooth: HCI UART protocol H4 registered <6>[ 6.534865] Bluetooth: HCI UART protocol LL registered <6>[ 6.544363] sdhci: Secure Digital Host Controller Interface driver <6>[ 6.550914] sdhci: Copyright(c) Pierre Ossman <6>[ 6.555560] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 6.565395] sdhci-esdhc-imx 2194000.mmc: Got CD GPIO <6>[ 6.569515] caam 2100000.crypto: Entropy delay = 3200 <6>[ 6.605050] mmc2: SDHCI controller on 2198000.mmc [2198000.mmc] using ADMA <6>[ 6.605556] mmc1: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA <4>[ 6.635061] hci-ti serial0-0: Direct firmware load for ti-connectivity/TIInit_11.8.32.bts failed with error -2 <6>[ 6.636779] caam 2100000.crypto: Instantiated RNG4 SH0 <4>[ 6.645677] hci-ti serial0-0: Falling back to sysfs fallback for: ti-connectivity/TIInit_11.8.32.bts <4>[ 6.656699] mmc1: host does not support reading read-only switch, assuming write-enable <6>[ 6.675788] mmc1: new high speed SDHC card at address aaaa <6>[ 6.685707] mmcblk1: mmc1:aaaa SL16G 14.8 GiB <6>[ 6.693615] mmc2: new DDR MMC card at address 0001 <6>[ 6.697371] mmc0: SDHCI controller on 2190000.mmc [2190000.mmc] using ADMA <6>[ 6.697547] caam 2100000.crypto: Instantiated RNG4 SH1 <6>[ 6.697654] caam 2100000.crypto: device ID = 0x0a16010000000000 (Era 4) <6>[ 6.697670] caam 2100000.crypto: job rings = 2, qi = 0 <6>[ 6.713351] mmcblk2: mmc2:0001 8GME4R 7.28 GiB <6>[ 6.719670] mmcblk1: p1 p2 <6>[ 6.725464] mmcblk2boot0: mmc2:0001 8GME4R partition 1 4.00 MiB <4>[ 6.726454] sdhci-esdhc-imx 2190000.mmc: card claims to support voltages below defined range <6>[ 6.748457] mmcblk2boot1: mmc2:0001 8GME4R partition 2 4.00 MiB <6>[ 6.749905] mmc0: new high speed SDIO card at address 0001 <6>[ 6.750084] caam algorithms registered in /proc/crypto <6>[ 6.754957] caam 2100000.crypto: registering rng-caam <6>[ 6.756112] mmcblk2rpmb: mmc2:0001 8GME4R partition 3 512 KiB, chardev (243:0) <6>[ 6.761563] mmcblk2: p1 p2 <6>[ 6.832542] usbcore: registered new interface driver usbhid <6>[ 6.838539] usbhid: USB HID core driver <6>[ 6.847763] ipu1_csi0: Registered ipu1_csi0 capture as /dev/video0 <6>[ 6.856049] ipu1_ic_prpenc: Registered ipu1_ic_prpenc capture as /dev/video1 <6>[ 6.864544] ipu1_ic_prpvf: Registered ipu1_ic_prpvf capture as /dev/video2 <6>[ 6.873552] ipu1_csi1: Registered ipu1_csi1 capture as /dev/video3 <6>[ 6.881667] ipu2_csi0: Registered ipu2_csi0 capture as /dev/video4 <5>[ 6.888721] random: crng init done <6>[ 6.889032] ipu2_ic_prpenc: Registered ipu2_ic_prpenc capture as /dev/video5 <6>[ 6.900753] ipu2_ic_prpvf: Registered ipu2_ic_prpvf capture as /dev/video6 <6>[ 6.909308] ipu2_csi1: Registered ipu2_csi1 capture as /dev/video7 <4>[ 6.946268] fsl-ssi-dai 202c000.ssi: No cache defaults, reading back from HW <6>[ 6.964785] NET: Registered protocol family 10 <6>[ 6.974594] Segment Routing with IPv6 <6>[ 6.978792] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 6.987970] NET: Registered protocol family 17 <6>[ 6.992754] can: controller area network core <6>[ 6.997850] NET: Registered protocol family 29 <6>[ 7.002593] can: raw protocol <6>[ 7.005999] can: broadcast manager protocol <6>[ 7.010595] can: netlink gateway - max_hops=1 <5>[ 7.015837] Key type dns_resolver registered <6>[ 7.023915] vddpu: supplied by SW1C <5>[ 7.031657] Registering SWP/SWPB emulation handler <5>[ 7.037587] Loading compiled-in X.509 certificates <3>[ 7.211661] vddarm: bypassed regulator has no supply! <3>[ 7.217299] vddarm: failed to get the current voltage: -EPROBE_DEFER <6>[ 7.224081] vddarm: supplied by SW1AB <3>[ 7.232280] vddsoc: bypassed regulator has no supply! <3>[ 7.237711] vddsoc: failed to get the current voltage: -EPROBE_DEFER <6>[ 7.244422] vddsoc: supplied by SW1C <6>[ 7.272151] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops) <6>[ 7.279155] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops) <6>[ 7.285964] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops) <6>[ 7.292021] etnaviv-gpu 130000.gpu: model: GC2000, revision: 5108 <6>[ 7.299607] etnaviv-gpu 134000.gpu: model: GC320, revision: 5007 <6>[ 7.306150] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1215 <6>[ 7.312640] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 <6>[ 7.322148] [drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor 1 <4>[ 7.347273] imx_usb 2184200.usb: No over current polarity defined <6>[ 7.359306] ci_hdrc ci_hdrc.1: EHCI Host Controller <6>[ 7.365010] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 7.397297] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 <6>[ 7.404966] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 <6>[ 7.413810] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 7.421389] usb usb1: Product: EHCI Host Controller <6>[ 7.426563] usb usb1: Manufacturer: Linux 5.10.125-cip10 ehci_hcd <6>[ 7.433006] usb usb1: SerialNumber: ci_hdrc.1 <6>[ 7.442905] hub 1-0:1.0: USB hub found <6>[ 7.447510] hub 1-0:1.0: 1 port detected <6>[ 7.473365] imx-media: Registered ipu_ic_pp csc/scaler as /dev/video8 <6>[ 7.533705] imx_thermal 20c8000.anatop:tempmon: Extended Commercial CPU temperature grade - max:105C critical:100C passive:95C <6>[ 7.554198] input: gpio-keys as /devices/platform/gpio-keys/input/input1 <6>[ 7.652963] Micrel KSZ9031 Gigabit PHY 2188000.ethernet-1:07: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=2188000.ethernet-1:07, irq=POLL) <6>[ 16.079637] fec 2188000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx <6>[ 16.097361] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 16.127243] Sending DHCP requests ., OK <6>[ 16.171834] IP-Config: Got DHCP answer from 10.201.1.3, my address is 10.201.4.154 <6>[ 16.179894] IP-Config: Complete: <6>[ 16.183459] device=eth0, hwaddr=f8:dc:7a:10:9b:1e, ipaddr=10.201.4.154, mask=255.255.0.0, gw=10.201.1.3 <6>[ 16.193755] host=10.201.4.154, domain=, nis-domain=(none) <6>[ 16.200026] bootserver=10.201.1.3, rootserver=10.201.1.3, rootpath= <6>[ 16.200064] nameserver0=10.1.1.1 <5>[ 16.216329] cfg80211: Loading compiled-in X.509 certificates for regulatory database <5>[ 16.285775] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' <4>[ 16.295126] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 <6>[ 16.297197] ALSA device list: <4>[ 16.304152] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db <6>[ 16.307626] #0: dt6-customboard-audio <6>[ 16.324987] Freeing unused kernel memory: 1024K <6>[ 16.378690] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 16.802299] udevd[216]: starting version 3.2.9 <27>[ 16.825308] udevd[216]: specified user 'tss' unknown <27>[ 16.830967] udevd[216]: specified group 'tss' unknown <30>[ 16.845987] udevd[217]: starting eudev-3.2.9 <4>[ 17.826479] coda 2040000.vpu: Direct firmware load for vpu_fw_imx6q.bin failed with error -2 <4>[ 17.835394] coda 2040000.vpu: Falling back to sysfs fallback for: vpu_fw_imx6q.bin <4>[ 18.624283] wl18xx_driver wl18xx.3.auto: Direct firmware load for ti-connectivity/wl1271-nvs.bin failed with error -2 <4>[ 18.635553] wl18xx_driver wl18xx.3.auto: Falling back to sysfs fallback for: ti-connectivity/wl1271-nvs.bin done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-2133522/environment . /lava-2133522/environment / # /lava-2133522/bin/lava-test-runner /lava-2133522/0 /lava-2133522/bin/lava-test-runner /lava-2133522/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-2133522/0/tests/0_dmesg + cat uuid + UUID=2133522_1.5.2.4.1<8>[ 19.832856] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 19.960329] <8>[ 20.076434] <8>[ 20.176853] + set +x <8>[ 20.188571] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-2133522/environment / # . /lava-2133522/environment/lava-2133522/bin/lava-test-runner /lava-2133522/1 / # /lava-2133522/bin/lava-test-runner /lava-2133522/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-2133522/1/tests/1_bootrr + cat uuid + UUID=2133522_1.5.2.4.5<8>[ 20.809533] + set +x + export 'PATH=/opt/bootrr/helpers:/lava-2133522/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr + sh helpers/bootrr-auto /lava-2133522/1/../bin/lava-test-case <8>[ 21.949570] /lava-2133522/1/../bin/lava-test-case <8>[ 22.069278] /lava-2133522/1/../bin/lava-test-case <8>[ 22.141037] + set +x <8>[ 22.183174] / #