connecting to NetworkSerialPort(target=Target(name='imx28-duckbill-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4014, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4014 connected to 10.8.254.5 (port 4014) Escape character: Ctrl-\ Type the escape character to get to the prompt. HTLLCLLC barebox 2020.05.0-00003-g4c4057edd6 #6 Fri May 29 14:12:02 CEST 2020 Board: I2SE Duckbill detected i.MX28 revision 1.2 mdio_bus: miibus0: probed eth0: got preset MAC address: 00:04:9f:06:00:04 mxs_mci 80010000.spi@80010000.of: registered as mci0 mci0: detected SD card version 2.0 mci0: registered disk0 malloc space: 0x43efdac0 -> 0x47dfb57f (size 63 MiB) [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mI2SE Duckbill:/[0m bootm -v -r /mnt/tftp/756179/tftp-deploy-smfqxevh/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/756179/tftp-deploy-smfqxevh/dtb/imx28-duckbill.dtb /mnt/tftp/756179/tftp-deploy-smfqxevh/kernel/zImage [1;32mbarebox@[1;36mI2SE Duckbill:/[0m bootm -v -r /mnt/tftp/756179/tftp-deploy-smfqxevh/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/756179/tftp-deploy-smfqxevh/dtb/imx28-duckbill.dtb /mnt/tftp/756179/tftp-deploy-smfqxevh/kernel/zImage eth0: 100Mbps full duplex link detected T eth0: DHCP client bound to address 10.8.254.107 Loading ARM Linux zImage '/mnt/tftp/756179/tftp-deploy-smfqxevh/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x41af1000 no initrd load address, defaulting to 0x42155000 Loaded initrd GZIP compressed '/mnt/tftp/756179/tftp-deploy-smfqxevh/ramdisk/ramdisk.cpio.gz' initrd is at 0x42155000-0x4292c7dc Loading devicetree from '/mnt/tftp/756179/tftp-deploy-smfqxevh/dtb/imx28-duckbill.dtb' commandline: console=ttyAMA0,115200n8 Starting kernel at 0x41af1000, initrd at 0x42155000, oftree at 0x4292d000... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.125-cip10 (KernelCI@build-j267335-arm-gcc-10-mxs-defconfig-6n8bv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 Tue Jun 28 03:14:01 UTC 2022 [ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=0005317f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: I2SE Duckbill [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000040000000-0x0000000047ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x0000000047ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x0000000047ffffff] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: console=ttyAMA0,115200n8 [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 103048K/131072K available (7934K kernel code, 1153K rwdata, 2700K rodata, 232K init, 6465K bss, 28024K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Running RCU self tests [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] clocksource: mxs_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000046] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.002898] Console: colour dummy device 80x30 [ 0.003122] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.003223] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.003317] ... MAX_LOCK_DEPTH: 48 [ 0.003409] ... MAX_LOCKDEP_KEYS: 8192 [ 0.003497] ... CLASSHASH_SIZE: 4096 [ 0.003591] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.003684] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.003771] ... CHAINHASH_SIZE: 32768 [ 0.003858] memory used by lock dependency info: 4061 kB [ 0.003947] memory used for stack traces: 2112 kB [ 0.004037] per task-struct memory footprint: 1536 bytes [ 0.004472] Calibrating delay loop... 226.09 BogoMIPS (lpj=1130496) [ 0.081782] pid_max: default: 32768 minimum: 301 [ 0.083240] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.083406] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.096373] CPU: Testing write buffer coherency: ok [ 0.107512] Setting up static identity map for 0x40008400 - 0x40008458 [ 0.118764] devtmpfs: initialized [ 0.208999] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.209337] futex hash table entries: 256 (order: 1, 12288 bytes, linear) [ 0.210963] pinctrl core: initialized pinctrl subsystem [ 0.233298] NET: Registered protocol family 16 [ 0.238116] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 1.006905] Serial: AMBA PL011 UART driver [ 1.011366] 80074000.serial: ttyAMA0 at MMIO 0x80074000 (irq = 229, base_baud = 0) is a PL011 rev2 [ 1.320109] printk: console [ttyAMA0] enabled [ 1.510591] mxs-dma 80004000.dma-apbh: initialized [ 1.537450] mxs-dma 80024000.dma-apbx: initialized [ 1.556938] SCSI subsystem initialized [ 1.565745] usbcore: registered new interface driver usbfs [ 1.572653] usbcore: registered new interface driver hub [ 1.578704] usbcore: registered new device driver usb [ 1.599370] pps_core: LinuxPPS API ver. 1 registered [ 1.604718] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.614251] PTP clock support registered [ 1.622699] Advanced Linux Sound Architecture Driver Initialized. [ 1.642850] clocksource: Switched to clocksource mxs_timer [ 5.028453] NET: Registered protocol family 2 [ 5.034948] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 5.048539] tcp_listen_portaddr_hash hash table entries: 128 (order: 0, 5632 bytes, linear) [ 5.057752] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 5.065925] TCP bind hash table entries: 1024 (order: 3, 40960 bytes, linear) [ 5.073924] TCP: Hash tables configured (established 1024 bind 1024) [ 5.082039] UDP hash table entries: 256 (order: 2, 24576 bytes, linear) [ 5.089460] UDP-Lite hash table entries: 256 (order: 2, 24576 bytes, linear) [ 5.098665] NET: Registered protocol family 1 [ 5.113301] RPC: Registered named UNIX socket transport module. [ 5.119714] RPC: Registered udp transport module. [ 5.124830] RPC: Registered tcp transport module. [ 5.129707] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 5.142734] Unpacking initramfs... [ 8.504652] Freeing initrd memory: 8032K [ 8.524511] workingset: timestamp_bits=30 max_order=15 bucket_order=0 [ 8.682196] NFS: Registering the id_resolver key type [ 8.689341] Key type id_resolver registered [ 8.694282] Key type id_legacy registered [ 8.699243] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 8.714987] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 8.723176] io scheduler mq-deadline registered [ 8.727889] io scheduler kyber registered [ 8.744409] 8006a000.serial: ttyAPP0 at MMIO 0x8006a000 (irq = 228, base_baud = 1500000) is a 8006a000.serial [ 8.758204] mxs-auart 8006a000.serial: Found APPUART 3.1.0 [ 8.994134] usbcore: registered new interface driver asix [ 9.000244] usbcore: registered new interface driver ax88179_178a [ 9.007366] usbcore: registered new interface driver cdc_ether [ 9.014537] usbcore: registered new interface driver smsc95xx [ 9.020969] usbcore: registered new interface driver net1080 [ 9.027549] usbcore: registered new interface driver cdc_subset [ 9.034420] usbcore: registered new interface driver zaurus [ 9.041085] usbcore: registered new interface driver cdc_ncm [ 9.047131] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 9.054849] usbcore: registered new interface driver usb-storage [ 9.100846] stmp3xxx-rtc 80056000.rtc: registered as rtc0 [ 9.107758] stmp3xxx-rtc 80056000.rtc: setting system clock to 1970-01-01T00:00:19 UTC (19) [ 9.118797] i2c /dev entries driver [ 9.139159] stmp3xxx_rtc_wdt stmp3xxx_rtc_wdt: initialized watchdog with heartbeat 19s [ 9.215952] usbcore: registered new interface driver usbhid [ 9.221880] usbhid: USB HID core driver [ 9.226862] mxs-mmc 80010000.spi: initialized [ 9.280738] mmc0: host does not support reading read-only switch, assuming write-enable [ 9.308402] mmc0: new high speed SDHC card at address 1234 [ 9.321954] NET: Registered protocol family 17 [ 9.340727] mmcblk0: mmc0:1234 SA04G 3.64 GiB [ 9.347129] Key type dns_resolver registered [ 9.353805] registered taskstats version 1 [ 9.402818] mmcblk0: p1 [ 9.617030] ALSA device list: [ 9.620660] No soundcards found. [ 9.631531] uart-pl011 80074000.serial: no DMA platform data [ 9.639490] Freeing unused kernel memory: 232K [ 9.644312] Kernel memory protection not selected by kernel config. [ 9.650768] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: [ 10.989348] udevd[81]: starting version 3.2.9 [ 11.010354] random: udevd: uninitialized urandom read (16 bytes read) [ 11.019996] random: udevd: uninitialized urandom read (16 bytes read) [ 11.030004] random: udevd: uninitialized urandom read (16 bytes read) [ 11.102325] udevd[81]: specified user 'tss' unknown [ 11.109088] udevd[81]: specified group 'tss' unknown [ 11.161920] udevd[82]: starting eudev-3.2.9 done Saving random seed: [ 17.293234] random: dd: uninitialized urandom read (32 bytes read) OK Starting network: OK Starting dropbear sshd: [ 18.117946] random: dropbear: uninitialized urandom read (32 bytes read) OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-756179/environment . /lava-756179/environment / # /lava-756179/bin/lava-test-runner /lava-756179/0 /lava-756179/bin/lava-test-runner /lava-756179/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-756179/0/tests/0_dmesg + cat uuid + UUID=756179_1.5.2.3.1 + set +x [ 19.466188] + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 19.821649] [ 20.180324] [ 20.532193] + set +x [ 20.553752] # / # #export SHELL=/bin/sh / # export SHELL=/bin/sh. /lava-756179/environment / # . /lava-756179/environment/lava-756179/bin/lava-test-runner /lava-756179/1 / # /lava-756179/bin/lava-test-runner /lava-756179/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-756179/1/tests/1_bootrr + cat uuid + UUID=756179_1.5.2.3.5 + set +x [ 21.518987] + export 'PATH=/opt/bootrr/helpers:/lava-756179/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr + sh helpers/bootrr-auto /lava-756179/1/../bin/lava-test-case [ 22.859879] /lava-756179/1/../bin/lava-test-case [ 23.157733] /lava-756179/1/../bin/lava-test-case [ 23.314598] + set +x [ 23.428353] / #