Trying 127.0.0.1... Connected to 127.0.0.1. Escape character is '^]'. U-Boot SPL 2018.03-mx6+g9879e5c (Jun 27 2019 - 15:24:32 +0000) Part number: VSM-DT6-302 Assembly: AS170013251 Date of production: 2017Aug20 Trying to boot from MMC1 MMC Boot Device: mmc0 (SD) U-Boot 2018.03-mx6+g9879e5c (Jun 27 2019 - 15:24:32 +0000) CPU: Freescale i.MX6Q rev1.3 at 792MHz CPU: Extended Commercial temperature grade (-20C to 105C) at 33C Reset cause: POR Board: Variscite DART-MX6 I2C: ready DRAM: 1 GiB PMIC: PFUZE100 ID=0x10 MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... OK auto-detected panel VAR-WVGA Display: VAR-WVGA (800x480) In: serial Out: serial Err: serial switch to partitions #0, OK mmc0 is current device eMMC: 7.3 GiB Net: using phy at 7 got MAC0 address from fuse: f8:dc:7a:10:9b:1e FEC [PRIME] Normal Boot Hit any key to stop autoboot: 10  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp FEC Waiting for PHY auto negotiation to complete. done BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 10.201.4.154 (262 ms) => setenv serverip 10.201.1.11 setenv serverip 10.201.1.11 => tftp 0x12000000 2171291/tftp-deploy-7gju1ov1/kernel/zImage tftp 0x12000000 2171291/tftp-deploy-7gju1ov1/kernel/zImage Using FEC device TFTP from server 10.201.1.11; our IP address is 10.201.4.154 Filename '2171291/tftp-deploy-7gju1ov1/kernel/zImage'. Load address: 0x12000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ######### 2.9 MiB/s done Bytes transferred = 9667072 (938200 hex) => tftp 0x18100000 2171291/tftp-deploy-7gju1ov1/ramdisk/ramdisk.cpio.gz.uboot tftp 0x18100000 2171291/tftp-deploy-7gju1ov1/ramdisk/ramdisk.cpio.gz.uboot Using FEC device TFTP from server 10.201.1.11; our IP address is 10.201.4.154 Filename '2171291/tftp-deploy-7gju1ov1/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x18100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 3.4 MiB/s done Bytes transferred = 16044419 (f4d183 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x18000000 2171291/tftp-deploy-7gju1ov1/dtb/imx6q-var-dt6customboard.dtb tftp 0x18000000 2171291/tftp-deploy-7gju1ov1/dtb/imx6q-var-dt6customboard.dtb Using FEC device TFTP from server 10.201.1.11; our IP address is 10.201.4.154 Filename '2171291/tftp-deploy-7gju1ov1/dtb/imx6q-var-dt6customboard.dtb'. Load address: 0x18000000 Loading: *### 3 MiB/s done Bytes transferred = 41057 (a061 hex) => setenv bootargs 'console=ttymxc0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' setenv bootargs 'console=ttymxc0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' => bootz 0x12000000 0x18100000 0x18000000 bootz 0x12000000 0x18100000 0x18000000 ## Loading init Ramdisk from Legacy Image at 18100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 16044355 Bytes = 15.3 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 18000000 Booting using the fdt blob at 0x18000000 Using Device Tree in place at 18000000, end 1800d060 switch to ldo_bypass mode! Starting kernel ... <6>[ 0.000000] Booting Linux on physical CPU 0x0 <5>[ 0.000000] Linux version 5.10.126-cip11 (KernelCI@build-j303258-arm-gcc-10-multi-v7-defconfig-mb7kk) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Mon Jul 4 06:38:48 UTC 2022 <6>[ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d <6>[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache <6>[ 0.000000] OF: fdt: Machine model: Variscite DART-MX6 Carrier-board <4>[ 0.000000] Malformed early option 'earlycon' <6>[ 0.000000] Memory policy: Data cache writealloc <6>[ 0.000000] efi: UEFI not found. <6>[ 0.000000] cma: Reserved 64 MiB at 0x4c000000 <6>[ 0.000000] Zone ranges: <6>[ 0.000000] DMA [mem 0x0000000010000000-0x000000003fffffff] <6>[ 0.000000] Normal empty <6>[ 0.000000] HighMem [mem 0x0000000040000000-0x000000004fffffff] <6>[ 0.000000] Movable zone start for each node <6>[ 0.000000] Early memory node ranges <6>[ 0.000000] node 0: [mem 0x0000000010000000-0x000000004fffffff] <6>[ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000004fffffff] <6>[ 0.000000] percpu: Embedded 20 pages/cpu s49868 r8192 d23860 u81920 <6>[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260608 <5>[ 0.000000] Kernel command line: console=ttymxc0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 933724K/1048576K available (13312K kernel code, 2230K rwdata, 5340K rodata, 2048K init, 425K bss, 49316K reserved, 65536K cma-reserved, 196608K highmem) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] L2C-310 errata 752271 769419 enabled <6>[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 <6>[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 <6>[ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines <6>[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled <6>[ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB <6>[ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76470001 <4>[ 0.000000] ccm: ldb_di0_sel already changed from reset value: 1 <4>[ 0.000000] ccm: ldb_di1_sel already changed from reset value: 1 <6>[ 0.000000] Switching to timer-based delay loop, resolution 333ns <6>[ 0.000008] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns <6>[ 0.000030] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns <6>[ 0.004074] Console: colour dummy device 80x30 <6>[ 0.004131] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) <6>[ 0.004151] pid_max: default: 32768 minimum: 301 <6>[ 0.004348] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.004375] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.005068] CPU: Testing write buffer coherency: ok <6>[ 0.005109] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.005397] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 <6>[ 0.006167] Setting up static identity map for 0x10300000 - 0x103000ac <6>[ 0.007832] rcu: Hierarchical SRCU implementation. <6>[ 0.011611] EFI services will not be available. <6>[ 0.011961] smp: Bringing up secondary CPUs ... <6>[ 0.012854] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 <6>[ 0.012862] CPU1: Spectre v2: using BPIALL workaround <6>[ 0.013892] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 <6>[ 0.013900] CPU2: Spectre v2: using BPIALL workaround <6>[ 0.014892] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 <6>[ 0.014900] CPU3: Spectre v2: using BPIALL workaround <6>[ 0.015029] smp: Brought up 1 node, 4 CPUs <6>[ 0.015045] SMP: Total of 4 processors activated (24.00 BogoMIPS). <6>[ 0.015057] CPU: All CPU(s) started in SVC mode. <6>[ 0.015713] devtmpfs: initialized <6>[ 0.023070] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 <6>[ 0.023335] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.023361] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) <6>[ 0.026750] pinctrl core: initialized pinctrl subsystem <6>[ 0.028769] DMI not present or invalid. <6>[ 0.029737] NET: Registered protocol family 16 <6>[ 0.033706] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.036149] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.036355] cpuidle: using governor menu <6>[ 0.036540] CPU identified as i.MX6Q, silicon rev 1.5 <6>[ 0.186990] vdd1p1: supplied by regulator-dummy <6>[ 0.193913] vdd3p0: supplied by regulator-dummy <6>[ 0.200724] vdd2p5: supplied by regulator-dummy <3>[ 0.207525] vddarm: bypassed regulator has no supply! <3>[ 0.207540] vddarm: failed to get the current voltage: -EPROBE_DEFER <3>[ 0.221003] vddsoc: bypassed regulator has no supply! <3>[ 0.221015] vddsoc: failed to get the current voltage: -EPROBE_DEFER <6>[ 0.545986] No ATAGs? <6>[ 0.546147] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. <6>[ 0.546159] hw-breakpoint: maximum watchpoint size is 4 bytes. <6>[ 0.550182] imx6q-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver <6>[ 0.555863] Serial: AMBA PL011 UART driver <6>[ 0.586362] mxs-dma 110000.dma-apbh: initialized <6>[ 0.592506] iommu: Default domain type: Translated <6>[ 0.592782] vgaarb: loaded <5>[ 0.593657] SCSI subsystem initialized <6>[ 0.594190] usbcore: registered new interface driver usbfs <6>[ 0.594242] usbcore: registered new interface driver hub <6>[ 0.594303] usbcore: registered new device driver usb <6>[ 0.595573] i2c i2c-0: IMX I2C adapter registered <6>[ 0.599417] i2c i2c-1: IMX I2C adapter registered <6>[ 0.600493] i2c i2c-2: IMX I2C adapter registered <6>[ 0.601845] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.601858] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.601884] PTP clock support registered <6>[ 0.605801] clocksource: Switched to clocksource mxc_timer1 <6>[ 1.661332] NET: Registered protocol family 2 <6>[ 1.661918] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 1.663168] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) <6>[ 1.663218] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 1.663329] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 1.663509] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 1.663787] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 1.663851] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 1.664060] NET: Registered protocol family 1 <6>[ 1.664741] RPC: Registered named UNIX socket transport module. <6>[ 1.664753] RPC: Registered udp transport module. <6>[ 1.664762] RPC: Registered tcp transport module. <6>[ 1.664772] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 1.664789] PCI: CLS 0 bytes, default 64 <6>[ 1.665327] Trying to unpack rootfs image as initramfs... <6>[ 3.063312] Freeing initrd memory: 15672K <4>[ 3.063910] hw perfevents: no interrupt-affinity property for /pmu, guessing. <6>[ 3.064502] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available <5>[ 3.066606] Initialise system trusted keyrings <6>[ 3.066979] workingset: timestamp_bits=30 max_order=18 bucket_order=0 <6>[ 3.073086] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 3.073905] NFS: Registering the id_resolver key type <5>[ 3.073956] Key type id_resolver registered <5>[ 3.073967] Key type id_legacy registered <6>[ 3.074086] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 3.074100] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <6>[ 3.074144] ntfs: driver 2.1.32 [Flags: R/O]. <5>[ 3.074644] Key type asymmetric registered <5>[ 3.074658] Asymmetric key parser 'x509' registered <6>[ 3.074716] bounce: pool size: 64 pages <6>[ 3.074760] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) <6>[ 3.074775] io scheduler mq-deadline registered <6>[ 3.074786] io scheduler kyber registered <4>[ 3.099758] pwm-backlight backlight: supply power not found, using dummy regulator <4>[ 3.126642] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 <6>[ 3.126667] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware <6>[ 3.173516] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled <6>[ 3.178140] SuperH (H)SCI(F) driver initialized <6>[ 3.179202] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 33, base_baud = 5000000) is a IMX <6>[ 4.040084] printk: console [ttymxc0] enabled <6>[ 4.046066] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 77, base_baud = 5000000) is a IMX <6>[ 4.055117] serial serial0: tty port ttymxc1 registered <6>[ 4.061205] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 78, base_baud = 5000000) is a IMX <6>[ 4.071686] msm_serial: driver initialized <6>[ 4.076348] STMicroelectronics ASC driver initialized <6>[ 4.083588] STM32 USART driver initialized <6>[ 4.107579] brd: module loaded <6>[ 4.122321] loop: module loaded <6>[ 4.141335] CAN device driver interface <6>[ 4.146814] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded <6>[ 4.156042] pps pps0: new PPS source ptp0 <6>[ 4.194026] fec 2188000.ethernet eth0: registered PHC device 0 <6>[ 4.201670] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 4.206934] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 4.213189] igb: Intel(R) Gigabit Ethernet Network Driver <6>[ 4.218873] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 4.230553] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver <6>[ 4.238289] usbcore: registered new interface driver pegasus <6>[ 4.244263] usbcore: registered new interface driver asix <6>[ 4.249979] usbcore: registered new interface driver ax88179_178a <6>[ 4.256385] usbcore: registered new interface driver cdc_ether <6>[ 4.262527] usbcore: registered new interface driver smsc75xx <6>[ 4.268600] usbcore: registered new interface driver smsc95xx <6>[ 4.274643] usbcore: registered new interface driver net1080 <6>[ 4.280621] usbcore: registered new interface driver cdc_subset <6>[ 4.286854] usbcore: registered new interface driver zaurus <6>[ 4.292763] usbcore: registered new interface driver cdc_ncm <6>[ 4.302171] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>[ 4.308997] ehci-pci: EHCI PCI platform driver <6>[ 4.313755] ehci-platform: EHCI generic platform driver <6>[ 4.319563] ehci-orion: EHCI orion driver <6>[ 4.324043] SPEAr-ehci: EHCI SPEAr driver <6>[ 4.328515] ehci-st: EHCI STMicroelectronics driver <6>[ 4.333827] ehci-exynos: EHCI Exynos driver <6>[ 4.338463] ehci-atmel: EHCI Atmel driver <6>[ 4.342903] tegra-ehci: Tegra EHCI driver <6>[ 4.347396] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver <6>[ 4.353858] ohci-pci: OHCI PCI platform driver <6>[ 4.358629] ohci-platform: OHCI generic platform driver <6>[ 4.364359] SPEAr-ohci: OHCI SPEAr driver <6>[ 4.368828] ohci-st: OHCI STMicroelectronics driver <6>[ 4.374152] ohci-atmel: OHCI Atmel driver <6>[ 4.379481] usbcore: registered new interface driver usb-storage <4>[ 4.393266] rtc-ds1307 2-0068: SET TIME! <6>[ 4.400658] rtc-ds1307 2-0068: registered as rtc0 <6>[ 4.407096] rtc-ds1307 2-0068: setting system clock to 2000-01-01T00:00:17 UTC (946684817) <6>[ 4.418347] i2c /dev entries driver <6>[ 4.441210] sdhci: Secure Digital Host Controller Interface driver <6>[ 4.447685] sdhci: Copyright(c) Pierre Ossman <6>[ 4.454959] Synopsys Designware Multimedia Card Interface Driver <6>[ 4.463141] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 4.472170] sdhci-esdhc-imx 2194000.mmc: Got CD GPIO <6>[ 4.477561] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 4.484899] usbcore: registered new interface driver usbhid <6>[ 4.490780] usbhid: USB HID core driver <6>[ 4.501392] NET: Registered protocol family 10 <6>[ 4.507263] Segment Routing with IPv6 <6>[ 4.509252] mmc2: SDHCI controller on 2198000.mmc [2198000.mmc] using ADMA <6>[ 4.509490] mmc1: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA <6>[ 4.511272] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 4.532342] NET: Registered protocol family 17 <6>[ 4.537115] can: controller area network core <6>[ 4.541830] NET: Registered protocol family 29 <6>[ 4.546578] can: raw protocol <4>[ 4.546864] mmc1: host does not support reading read-only switch, assuming write-enable <6>[ 4.549815] can: broadcast manager protocol <6>[ 4.562542] can: netlink gateway - max_hops=1 <6>[ 4.564243] mmc1: new high speed SDHC card at address aaaa <5>[ 4.567716] Key type dns_resolver registered <6>[ 4.574041] mmcblk1: mmc1:aaaa SL16G 14.8 GiB <6>[ 4.583902] ThumbEE CPU extension supported. <5>[ 4.588499] Registering SWP/SWPB emulation handler <5>[ 4.593872] Loading compiled-in X.509 certificates <6>[ 4.596575] mmc2: new DDR MMC card at address 0001 <6>[ 4.598106] mmcblk1: p1 p2 <6>[ 4.605818] mmc0: SDHCI controller on 2190000.mmc [2190000.mmc] using ADMA <6>[ 4.608758] mmcblk2: mmc2:0001 8GME4R 7.28 GiB <6>[ 4.620206] mmcblk2boot0: mmc2:0001 8GME4R partition 1 4.00 MiB <4>[ 4.620626] sdhci-esdhc-imx 2190000.mmc: card claims to support voltages below defined range <3>[ 4.626467] vddarm: bypassed regulator has no supply! <6>[ 4.627393] mmcblk2boot1: mmc2:0001 8GME4R partition 2 4.00 MiB <6>[ 4.627697] mmcblk2rpmb: mmc2:0001 8GME4R partition 3 512 KiB, chardev (235:0) <6>[ 4.635770] mmcblk2: p1 p2 <3>[ 4.640524] vddarm: failed to get the current voltage: -EPROBE_DEFER <6>[ 4.650524] mmc0: new high speed SDIO card at address 0001 <3>[ 4.657002] vddsoc: bypassed regulator has no supply! <3>[ 4.674952] vddsoc: failed to get the current voltage: -EPROBE_DEFER <4>[ 4.684271] pwm-backlight backlight: supply power not found, using dummy regulator <4>[ 4.704353] imx_usb 2184200.usb: No over current polarity defined <6>[ 4.715019] ci_hdrc ci_hdrc.1: EHCI Host Controller <6>[ 4.720223] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 4.755709] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 <6>[ 4.762154] hub 1-0:1.0: USB hub found <6>[ 4.766234] hub 1-0:1.0: 1 port detected <3>[ 4.774076] vddarm: bypassed regulator has no supply! <3>[ 4.779429] vddarm: failed to get the current voltage: -EPROBE_DEFER <3>[ 4.788045] vddsoc: bypassed regulator has no supply! <3>[ 4.793366] vddsoc: failed to get the current voltage: -EPROBE_DEFER <4>[ 4.802316] pwm-backlight backlight: supply power not found, using dummy regulator <3>[ 4.815494] vddarm: bypassed regulator has no supply! <3>[ 4.820872] vddarm: failed to get the current voltage: -EPROBE_DEFER <3>[ 4.829360] vddsoc: bypassed regulator has no supply! <3>[ 4.834681] vddsoc: failed to get the current voltage: -EPROBE_DEFER <4>[ 4.843542] pwm-backlight backlight: supply power not found, using dummy regulator <6>[ 4.855641] input: gpio-keys as /devices/platform/gpio-keys/input/input0 <3>[ 4.866362] vddarm: bypassed regulator has no supply! <3>[ 4.871686] vddarm: failed to get the current voltage: -EPROBE_DEFER <3>[ 4.880318] vddsoc: bypassed regulator has no supply! <3>[ 4.885640] vddsoc: failed to get the current voltage: -EPROBE_DEFER <4>[ 4.894561] pwm-backlight backlight: supply power not found, using dummy regulator <6>[ 4.989476] Micrel KSZ9031 Gigabit PHY 2188000.ethernet-1:07: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=2188000.ethernet-1:07, irq=POLL) <6>[ 8.166118] fec 2188000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx <6>[ 8.185707] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 8.215756] Sending DHCP requests ., OK <6>[ 8.259827] IP-Config: Got DHCP answer from 10.201.1.3, my address is 10.201.4.154 <6>[ 8.267687] IP-Config: Complete: <6>[ 8.271187] device=eth0, hwaddr=f8:dc:7a:10:9b:1e, ipaddr=10.201.4.154, mask=255.255.0.0, gw=10.201.1.3 <6>[ 8.281296] host=10.201.4.154, domain=, nis-domain=(none) <6>[ 8.287408] bootserver=10.201.1.3, rootserver=10.201.1.3, rootpath= <6>[ 8.287414] nameserver0=10.1.1.1 <6>[ 8.306457] Freeing unused kernel memory: 2048K <6>[ 8.346202] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 8.476763] udevd[126]: starting version 3.2.9 <5>[ 8.482651] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 8.489792] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 8.496646] random: udevd: uninitialized urandom read (16 bytes read) <27>[ 8.512202] udevd[126]: specified user 'tss' unknown <27>[ 8.517893] udevd[126]: specified group 'tss' unknown <30>[ 8.526237] udevd[127]: starting eudev-3.2.9 <6>[ 8.924423] imx-ipuv3 2400000.ipu: IPUv3H probed <6>[ 8.931922] imx-ipuv3 2800000.ipu: IPUv3H probed <3>[ 8.941071] vddarm: bypassed regulator has no supply! <3>[ 8.946458] vddarm: failed to get the current voltage: -EPROBE_DEFER <3>[ 8.955625] vddsoc: bypassed regulator has no supply! <3>[ 8.961067] vddsoc: failed to get the current voltage: -EPROBE_DEFER <4>[ 8.971028] pwm-backlight backlight: supply power not found, using dummy regulator <3>[ 9.014220] vddarm: bypassed regulator has no supply! <3>[ 9.019604] vddarm: failed to get the current voltage: -EPROBE_DEFER <3>[ 9.029085] vddsoc: bypassed regulator has no supply! <4>[ 9.029379] etnaviv-gpu 130000.gpu: deferred probe timeout, ignoring dependency <3>[ 9.034420] vddsoc: failed to get the current voltage: -EPROBE_DEFER <4>[ 9.042085] etnaviv-gpu: probe of 130000.gpu failed with error -110 <4>[ 9.051685] pwm-backlight backlight: supply power not found, using dummy regulator <4>[ 9.055307] etnaviv-gpu 134000.gpu: deferred probe timeout, ignoring dependency <4>[ 9.070737] etnaviv-gpu: probe of 134000.gpu failed with error -110 <4>[ 9.077511] etnaviv-gpu 2204000.gpu: deferred probe timeout, ignoring dependency <4>[ 9.085195] etnaviv-gpu: probe of 2204000.gpu failed with error -110 <6>[ 9.116454] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops imx_drm_exit [imxdrm]) <3>[ 9.122860] vddarm: bypassed regulator has no supply! <6>[ 9.125074] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops imx_drm_exit [imxdrm]) <3>[ 9.130299] vddarm: failed to get the current voltage: -EPROBE_DEFER <6>[ 9.138906] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops imx_drm_exit [imxdrm]) <3>[ 9.147752] vddsoc: bypassed regulator has no supply! <6>[ 9.154030] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops imx_drm_exit [imxdrm]) <3>[ 9.159141] vddsoc: failed to get the current voltage: -EPROBE_DEFER <6>[ 9.167894] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with HDCP (DWC HDMI 3D TX PHY) <4>[ 9.177216] pwm-backlight backlight: supply power not found, using dummy regulator <6>[ 9.213665] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops [dw_hdmi_imx]) <3>[ 9.432845] vddarm: bypassed regulator has no supply! <3>[ 9.438220] vddarm: failed to get the current voltage: -EPROBE_DEFER <3>[ 9.447465] vddsoc: bypassed regulator has no supply! <3>[ 9.452792] vddsoc: failed to get the current voltage: -EPROBE_DEFER <6>[ 9.461234] caam 2100000.crypto: Entropy delay = 3200 <6>[ 9.527410] caam 2100000.crypto: Instantiated RNG4 SH0 <6>[ 9.588171] caam 2100000.crypto: Instantiated RNG4 SH1 <6>[ 9.593609] caam 2100000.crypto: device ID = 0x0a16010000000000 (Era 4) <6>[ 9.600611] caam 2100000.crypto: job rings = 2, qi = 0 <6>[ 9.636138] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops imx_drm_exit [imxdrm]) <6>[ 9.644758] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops imx_drm_exit [imxdrm]) <6>[ 9.653454] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops imx_drm_exit [imxdrm]) <6>[ 9.662118] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops imx_drm_exit [imxdrm]) <6>[ 9.670931] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with HDCP (DWC HDMI 3D TX PHY) <6>[ 9.705213] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_platform_driver_exit [dw_hdmi_imx]) <4>[ 9.730022] pwm-backlight backlight: supply power not found, using dummy regulator <3>[ 9.744892] vddarm: bypassed regulator has no supply! <3>[ 9.750340] vddarm: failed to get the current voltage: -EPROBE_DEFER <3>[ 9.759856] vddsoc: bypassed regulator has no supply! <3>[ 9.765189] vddsoc: failed to get the current voltage: -EPROBE_DEFER <6>[ 9.780608] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops imx_drm_exit [imxdrm]) <4>[ 9.783525] usb_phy_generic usbphynop1: supply vcc not found, using dummy regulator <6>[ 9.789262] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops imx_drm_exit [imxdrm]) <4>[ 9.797340] usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests <6>[ 9.805694] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops imx_drm_exit [imxdrm]) <4>[ 9.814254] usb_phy_generic usbphynop2: supply vcc not found, using dummy regulator <6>[ 9.822557] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops imx_drm_exit [imxdrm]) <4>[ 9.831190] usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests <6>[ 9.839173] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with HDCP (DWC HDMI 3D TX PHY) <6>[ 9.871486] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_platform_driver_exit [dw_hdmi_imx]) <4>[ 9.883284] ------------[ cut here ]------------ <4>[ 9.888297] WARNING: CPU: 3 PID: 88 at drivers/gpu/drm/drm_bridge.c:237 drm_encoder_cleanup+0x24/0x84 <4>[ 9.897818] Modules linked in: ac97_bus snd_pcm_dmaengine snd_pcm snd_timer snd soundcore phy_generic caam error flexcan dw_hdmi_imx dw_hdmi etnaviv gpu_sched imx_ldb imxdrm imx_ipu_v3 <4>[ 9.914684] CPU: 3 PID: 88 Comm: kworker/3:4 Not tainted 5.10.126-cip11 #1 <4>[ 9.921835] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) <4>[ 9.928654] Workqueue: events deferred_probe_work_func <4>[ 9.934108] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) <4>[ 9.942134] [] (show_stack) from [] (dump_stack+0xc0/0xd4) <4>[ 9.949640] [] (dump_stack) from [] (__warn+0xec/0x148) <4>[ 9.956893] [] (__warn) from [] (warn_slowpath_fmt+0x64/0xbc) <4>[ 9.964668] [] (warn_slowpath_fmt) from [] (drm_encoder_cleanup+0x24/0x84) <4>[ 9.973561] [] (drm_encoder_cleanup) from [] (drm_mode_config_cleanup+0x48/0x304) <4>[ 9.983065] [] (drm_mode_config_cleanup) from [] (drm_managed_release+0x80/0xd4) <4>[ 9.992473] [] (drm_managed_release) from [] (drm_dev_put+0x6c/0x78) <4>[ 10.000852] [] (drm_dev_put) from [] (imx_drm_bind+0x74/0x124 [imxdrm]) <4>[ 10.009483] [] (imx_drm_bind [imxdrm]) from [] (try_to_bring_up_master+0x160/0x1ac) <4>[ 10.019149] [] (try_to_bring_up_master) from [] (__component_add+0x98/0x13c) <4>[ 10.028208] [] (__component_add) from [] (platform_drv_probe+0x48/0x98) <4>[ 10.036838] [] (platform_drv_probe) from [] (really_probe+0xf0/0x49c) <4>[ 10.045290] [] (really_probe) from [] (driver_probe_device+0x5c/0xb4) <4>[ 10.053742] [] (driver_probe_device) from [] (bus_for_each_drv+0x84/0xc8) <4>[ 10.062539] [] (bus_for_each_drv) from [] (__device_attach+0xb0/0x1d8) <4>[ 10.071076] [] (__device_attach) from [] (bus_probe_device+0x84/0x8c) <4>[ 10.079527] [] (bus_probe_device) from [] (deferred_probe_work_func+0x78/0xa4) <4>[ 10.088764] [] (deferred_probe_work_func) from [] (process_one_work+0x1ec/0x548) <4>[ 10.098168] [] (process_one_work) from [] (worker_thread+0x64/0x5a8) <4>[ 10.106537] [] (worker_thread) from [] (kthread+0x14c/0x150) <4>[ 10.114205] [] (kthread) from [] (ret_from_fork+0x14/0x2c) <4>[ 10.121692] Exception stack(0xc335bfb0 to 0xc335bff8) <4>[ 10.127012] bfa0: 00000000 00000000 00000000 00000000 <4>[ 10.135457] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 <4>[ 10.143900] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 <4>[ 10.150853] ---[ end trace fb5fda1dd9b10763 ]--- <4>[ 10.157115] pwm-backlight backlight: supply power no# t found, using dummy regulator <3>[ 10.172784] vddarm: bypassed regulator has no supply! <3>[ 10.178169] vddarm: failed to get the current voltage: -EPROBE_DEFER <3>[ 10.187429] vddsoc: bypassed regulator has no supply! <3>[ 10.192756] vddsoc: failed to get the current voltage: -EPROBE_DEFER <6>[ 10.206698] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops imx_drm_exit [imxdrm]) <6>[ 10.213646] caam algorithms registered in /proc/crypto <6>[ 10.215230] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops imx_drm_exit [imxdrm]) <6>[ 10.222433] caam 2100000.crypto: registering rng-caam <6>[ 10.229260] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops imx_drm_exit [imxdrm]) #<6>[ 10.243051] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops imx_drm_exit [imxdrm]) <6>[ 10.251762] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with HDCP (DWC HDMI 3D TX PHY) done <6>[ 10.263481] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_platform_driver_exit [dw_hdmi_imx]) <4>[ 10.274889] ------------[ cut here ]------------ Saving random seed: <4>[ 10.279874] WARNING: CPU: 3 PID: 88 at drivers/gpu/drm/drm_bridge.c:237 drm_encoder_cleanup+0x24/0x84 <4>[ 10.291079] Modules linked in: caam_jr caamhash_desc caamalg_desc crypto_engine libdes authenc snd_soc_simple_card snd_soc_simple_card_utils snd_soc_core ac97_bus snd_pcm_dmaengine snd_pcm snd_timer snd soundcore phy_generic caam error flexcan dw_hdmi_imx dw_hdmi etnaviv gpu_sched imx_ldb imxdrm imx_ipu_v3 <4>[ 10.291579] urandom_read_iter: 1 callbacks suppressed <5>[ 10.291586] random: dd: uninitialized urandom read (32 bytes read) <4>[ 10.318704] CPU: 3 PID: 88 Comm: kworker/3:4 Tainted: G W 5.10.126-cip11 #1 <4>[ 10.318714] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) <4>[ 10.318763] Workqueue: events deferred_probe_work_func OK <4>[ 10.351421] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) <4>[ 10.359770] [] (show_stack) from [] (dump_stack+0xc0/0xd4) Starting network: <4>[ 10.367287] [] (dump_stack) from [] (__warn+0xec/0x148) <4>[ 10.376117] [] (__warn) from [] (warn_slowpath_fmt+0x64/0xbc) <4>[ 10.383908] [] (warn_slowpath_fmt) from [] (drm_encoder_cleanup+0x24/0x84) ip: RTNETLINK answers: File exist<4>[ 10.392823] [] (drm_encoder_cleanup) from [] (drm_mode_config_cleanup+0x48/0x304) s FAIL <4>[ 10.405184] [] (drm_mode_config_cleanup) from [] (drm_managed_release+0x80/0xd4) <4>[ 10.415355] [] (drm_managed_release) from [] (drm_dev_put+0x6c/0x78) <5>[ 10.416986] random: crng init done <4>[ 10.423748] [] (drm_dev_put) from [] (imx_drm_bind+0x74/0x124 [imxdrm]) <4>[ 10.436022] [] (imx_drm_bind [imxdrm]) from [] (try_to_bring_up_master+0x160/0x1ac) <4>[ 10.445720] [] (try_to_bring_up_master) from [] (__component_add+0x98/0x13c) Starting dropbear sshd: <4>[ 10.454805] [] (__component_add) from [] (platform_drv_probe+0x48/0x98) <4>[ 10.465509] [] (platform_drv_probe) from [] (really_probe+0xf0/0x49c) OK <4>[ 10.473990] [] (really_probe) from [] (driver_probe_device+0x5c/0xb4) <4>[ 10.482779] [] (driver_probe_device) from [] (bus_for_each_drv+0x84/0xc8) <4>[ 10.491609] [] (bus_for_each_drv) from [] (__device_attach+0xb0/0x1d8) <4>[ 10.491630] [] (__device_attach) from [] (bus_probe_device+0x84/0x8c) <4>[ 10.508586] [] (bus_probe_device) from [] (deferred_probe_work_func+0x78/0xa4) /bin/sh: <4>[ 10.517846] [] (deferred_probe_work_func) from [] (process_one_work+0x1ec/0x548) <4>[ 10.528017] [] (process_one_work) from [] (worker_thread+0x64/0x5a8) can't access tty; job control tur<4>[ 10.536382] [] (worker_thread) from [] (kthread+0x14c/0x150) ned off<4>[ 10.546913] [] (kthread) from [] (ret_from_fork+0x14/0x2c) <4>[ 10.554997] Exception stack(0xc335bfb0 to 0xc335bff8) <4>[ 10.560484] bfa0: 00000000 00000000 00000000 00000000 <4>[ 10.568940] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 <4>[ 10.577387] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 / # <4>[ 10.584330] ---[ end trace fb5fda1 dd9b10764 ]--- # / # <4>[ 10.590802] pwm-backlight backlight: supply power not found, using dummy regulator <3>[ 10.604956] vddarm: bypassed regulator has no supply! <3>[ 10.610334] vddarm: failed to get the current voltage: -EPROBE_DEFER <3>[ 10.619098] vddsoc: bypassed regulator has no supply! <3>[ 10.624422] vddsoc: failed to get the current voltage: -EPROBE_DEFER <6>[ 10.637979] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops imx_drm_exit [imxdrm]) <6>[ 10.64# 6514] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops imx_drm_exit [imxdrm]) <6>[ 10.655021] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops imx_drm_exit [imxdrm]) <6>[ 10.663586] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops imx_drm_exit [imxdrm]) <6>[ 10.672281] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with HDCP (DWC HDMI 3D TX PHY) / # <6>[ 10.683548] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_platform_driver_exit [dw_hdmi_imx]) <4>[ 10.694713] ------------[ cut here ]------------ <4>[ 10.699668] WARNING: CPU: 3 PID: 88 at drivers/gpu/drm/drm_bridge.c:237 drm_encoder_cleanup+0x24/0x84 <4>[ 10.709186] Modules linked in: caam_jr caamhash_desc caamalg_desc crypto_engine libdes authenc snd_soc_simple_card snd_soc_simple_card_utils snd_soc_core ac97_bus snd_pcm_dmaengine snd_pcm snd_timer snd soundcore phy_generic caam error flexcan dw_hdmi_imx dw_hdmi etnaviv gpu_sched imx_ldb imxdrm imx_ipu_v3 [ 10.736810] CPU: 3 PID: 88 Comm: kworker/3:4 Tainted: G W 5.10.126-cip11 #1 <4>[ 10.745350] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) #<4>[ 10.752157] Workqueue: events deferred_probe_work_func <4>[ 10.757677] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) <4>[ 10.765698] [] (show_stack) from [] (dump_stack+0xc0/0xd4) <4>[ 10.773195] [] (dump_stack) from [] (__warn+0xec/0x148) <4>[ 10.780440] [] (__warn) from [] (warn_slowpath_fmt+0x64/0xbc) / # <4>[ 10.788367] [] (warn_slowpath_fmt) from [] (drm_encoder_cleanup+0x24/0x84) <4>[ 10.797597] [] (drm_encoder_cleanup) from [] (drm_mode_config_cleanup+0x48/0x304) <4>[ 10.807093] [] (drm_mode_config_cleanup) from [] (drm_managed_release+0x80/0xd4) <4>[ 10.816500] [] (drm_managed_release) from [] (drm_dev_put+0x6c/0x78) <4>[ 10.824876] [] (drm_dev_put) from [] (imx_drm_bind+0x74/0x124 [imxdrm]) <4>[ 10.833506] [] (imx_drm_bind [imxdrm]) from [] (try_to_bring_up_master+0x160/0x1ac) <4>[ 10.843168] [] (try_to_bring_up_master) from [] (__component_add+0x98/0x13c) e<4>[ 10.852226] [] (__component_add) from [] (platform_drv_probe+0x48/0x98) <4>[ 10.860933] [] (platform_drv_probe) from [] (really_probe+0xf0/0x49c) x<4>[ 10.869385] [] (really_probe) from [] (driver_probe_device+0x5c/0xb4) <4>[ 10.877911] [] (driver_probe_device) from [] (bus_for_each_drv+0x84/0xc8) p<4>[ 10.886707] [] (bus_for_each_drv) from [] (__device_attach+0xb0/0x1d8) <4>[ 10.895325] [] (__device_attach) from [] (bus_probe_device+0x84/0x8c) o<4>[ 10.903775] [] (bus_probe_device) from [] (deferred_probe_work_func+0x78/0xa4) r<4>[ 10.913090] [] (deferred_probe_work_func) from [] (process_one_work+0x1ec/0x548) <4>[ 10.922581] [] (process_one_work) from [] (worker_thread+0x64/0x5a8) <4>[ 10.930945] [] (worker_thread) from [] (kthread+0x14c/0x150) t<4>[ 10.938634] [] (kthread) from [] (ret_from_fork+0x14/0x2c) <4>[ 10.946199] Exception stack(0xc335bfb0 to 0xc335bff8) <4>[ 10.951519] bfa0: 00000000 00000000 00000000 00000000 <4>[ 10.959963] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 <4>[ 10.968481] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 <4>[ 10.975401] ---[ end trace fb5fda1dd9b10765 ]--- SHELL=/bin/sh / # . /lava-2171291/environment / # /lava-2171291/bin/lava-test-runner /lava-2171291/0 /lava-2171291/bin/lava-test-runner /lava-2171291/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-2171291/0/tests/0_dmesg + cat uuid + UUID=2171291_1.5.2.4<8>[ 11.159826] .1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 11.208324] <8>[ 11.251492] <8>[ 11.294516] + set<8>[ 11.304481] +x / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-2171291/environment / # . /lava-2171291/environment/lava-2171291/bin/lava-test-runner /lava-2171291/1 / # /lava-2171291/bin/lava-test-runner /lava-2171291/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-2171291/1/tests/1_bootrr + cat uuid + UUID=2171291_1.5.2<8>[ 11.803847] .4.5 + set +x + export 'PATH=/opt/bootrr/helpers:/lava-2171291/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr + sh helpers/bootrr-auto /lava-2171291/1/../bin/lava-test-case <8>[ 12.851511] /lava-2171291/1/../bin/lava-test-case <8>[ 12.892312] /lava-2171291/1/../bin/lava-test-case <8>[ 12.918107] + set<8>[ 12.937360] +x / #