connecting to NetworkSerialPort(target=Target(name='imx6qp-wandboard-revd1-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4009, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4009 connected to 10.8.254.5 (port 4009) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2020.05.0-00156-g60b1a02e5a-dirty #28 Sat Jun 27 00:22:32 CEST 2020 Board: Technexion EDM1-CF-IMX6 Quad Plus with PMIC and fairy baseboard detected i.MX6 Quad Plus revision 2.0 i.MX reset reason POR (SRSR: 0x00000001) i.MX6 Quad Plus unique ID: e1fdfca7020b09d4 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2190000.usdhc@2190000.of: registered as mmc0 imx-esdhc 2194000.usdhc@2194000.of: registered as mmc1 imx-esdhc 2198000.usdhc@2198000.of: registered as mmc2 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-ipuv3 2800000.ipu@2800000.of: IPUv3H probed imx-ldb ldb.of: Neither display timings in ldb node nor remote panel found netconsole: registered as netconsole-1 malloc space: 0x4fe7a7c0 -> 0x8fcf4f7f (size 1022.5 MiB) [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/782475/tftp-deploy-gpzvkqhr/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/782475/tftp-deploy-gpzvkqhr/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/782475/tftp-deploy-gpzvkqhr/kernel/zImage [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/782475/tftp-deploy-gpzvkqhr/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/782475/tftp-deploy-gpzvkqhr/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/782475/tftp-deploy-gpzvkqhr/kernel/zImage eth0: 1000Mbps full duplex link detected [33mWARNING:[0m eth0: No MAC address set. Using random address 2a:95:f5:a2:e6:0f T eth0: DHCP client bound to address 10.8.254.24 Loading ARM Linux zImage '/mnt/tftp/782475/tftp-deploy-gpzvkqhr/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x13224000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/782475/tftp-deploy-gpzvkqhr/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x189b364c Loading devicetree from '/mnt/tftp/782475/tftp-deploy-gpzvkqhr/dtb/imx6qp-wandboard-revd1.dtb' commandline: console=ttymxc0,115200n8 Starting kernel at 0x13224000, initrd at 0x18000000, oftree at 0x189b4000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.129-cip12 (KernelCI@build-j402880-arm-gcc-10-imx-v6-v7-defconfig-mbzbr) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Tue Jul 26 13:58:37 UTC 2022 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wandboard i.MX6 QuadPlus Board revD1 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0x8a000000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000010000000-0x000000003fffffff] [ 0.000000] HighMem [mem 0x0000000040000000-0x000000008fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000010000000-0x000000008fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000008fffffff] [ 0.000000] percpu: Embedded 20 pages/cpu s51884 r8192 d21844 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752 [ 0.000000] Kernel command line: console=ttymxc0,115200n8 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1972752K/2097152K available (14336K kernel code, 2022K rwdata, 4840K rodata, 1024K init, 6661K bss, 58864K reserved, 65536K cma-reserved, 1244144K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Running RCU self tests [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU lockdep checking is enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76470001 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000010] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000042] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.001801] Console: colour dummy device 80x30 [ 0.001851] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001874] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001897] ... MAX_LOCK_DEPTH: 48 [ 0.001919] ... MAX_LOCKDEP_KEYS: 8192 [ 0.001940] ... CLASSHASH_SIZE: 4096 [ 0.001962] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001987] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.002009] ... CHAINHASH_SIZE: 32768 [ 0.002030] memory used by lock dependency info: 4061 kB [ 0.002052] memory used for stack traces: 2112 kB [ 0.002074] per task-struct memory footprint: 1536 bytes [ 0.002195] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.002240] pid_max: default: 32768 minimum: 301 [ 0.002640] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.002685] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.006247] CPU: Testing write buffer coherency: ok [ 0.006383] CPU0: Spectre v2: using BPIALL workaround [ 0.007442] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.010716] Setting up static identity map for 0x10100000 - 0x10100078 [ 0.011473] rcu: Hierarchical SRCU implementation. [ 0.014037] smp: Bringing up secondary CPUs ... [ 0.017351] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.017366] CPU1: Spectre v2: using BPIALL workaround [ 0.021656] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.021672] CPU2: Spectre v2: using BPIALL workaround [ 0.024930] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.024945] CPU3: Spectre v2: using BPIALL workaround [ 0.025685] smp: Brought up 1 node, 4 CPUs [ 0.025725] SMP: Total of 4 processors activated (24.00 BogoMIPS). [ 0.025756] CPU: All CPU(s) started in SVC mode. [ 0.028589] devtmpfs: initialized [ 0.071611] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.074502] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.074591] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.078658] pinctrl core: initialized pinctrl subsystem [ 0.085357] NET: Registered protocol family 16 [ 0.113912] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.119763] thermal_sys: Registered thermal governor 'step_wise' [ 0.120321] cpuidle: using governor menu [ 0.120488] CPU identified as i.MX6QP, silicon rev 1.0 [ 0.609654] vdd1p1: supplied by regulator-dummy [ 0.635280] vdd3p0: supplied by regulator-dummy [ 0.660240] vdd2p5: supplied by regulator-dummy [ 0.685140] vddarm: supplied by regulator-dummy [ 0.711147] vddpu: supplied by regulator-dummy [ 0.735501] vddsoc: supplied by regulator-dummy [ 1.859360] No ATAGs? [ 1.860029] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 1.860136] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 1.866416] imx6q-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver [ 1.989446] mxs-dma 110000.dma-apbh: initialized [ 1.997673] imx6q-pinctrl 20e0000.pinctrl: pin MX6Q_PAD_EIM_D22 already requested by 20e0000.pinctrl; cannot claim for regulator-usbotgvbus [ 1.997719] imx6q-pinctrl 20e0000.pinctrl: pin-42 (regulator-usbotgvbus) status -22 [ 1.997758] imx6q-pinctrl 20e0000.pinctrl: could not request pin 42 (MX6Q_PAD_EIM_D22) from group usbotgvbusgrp on device 20e0000.pinctrl [ 1.997794] reg-fixed-voltage regulator-usbotgvbus: Error applying setting, reverse things back [ 1.997902] reg-fixed-voltage: probe of regulator-usbotgvbus failed with error -22 [ 2.003047] vgaarb: loaded [ 2.005514] SCSI subsystem initialized [ 2.007409] usbcore: registered new interface driver usbfs [ 2.007700] usbcore: registered new interface driver hub [ 2.007899] usbcore: registered new device driver usb [ 2.008376] usb_phy_generic usbphynop1: supply vcc not found, using dummy regulator [ 2.009268] usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests [ 2.009895] usb_phy_generic usbphynop2: supply vcc not found, using dummy regulator [ 2.010660] usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests [ 2.015145] i2c i2c-0: IMX I2C adapter registered [ 2.024194] i2c i2c-1: IMX I2C adapter registered [ 2.031082] i2c i2c-2: IMX I2C adapter registered [ 2.032247] mc: Linux media interface: v0.10 [ 2.032427] videodev: Linux video capture interface: v2.00 [ 2.033136] pps_core: LinuxPPS API ver. 1 registered [ 2.033172] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.033253] PTP clock support registered [ 2.035289] Advanced Linux Sound Architecture Driver Initialized. [ 2.041161] Bluetooth: Core ver 2.22 [ 2.041330] NET: Registered protocol family 31 [ 2.041363] Bluetooth: HCI device and connection manager initialized [ 2.041504] Bluetooth: HCI socket layer initialized [ 2.041560] Bluetooth: L2CAP socket layer initialized [ 2.041754] Bluetooth: SCO socket layer initialized [ 2.044524] clocksource: Switched to clocksource mxc_timer1 [ 3.625360] VFS: Disk quotas dquot_6.6.0 [ 3.625596] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 3.664599] NET: Registered protocol family 2 [ 3.665309] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 3.668443] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 22528 bytes, linear) [ 3.669035] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 3.669236] TCP bind hash table entries: 8192 (order: 6, 327680 bytes, linear) [ 3.670432] TCP: Hash tables configured (established 8192 bind 8192) [ 3.671186] UDP hash table entries: 512 (order: 3, 49152 bytes, linear) [ 3.671413] UDP-Lite hash table entries: 512 (order: 3, 49152 bytes, linear) [ 3.672201] NET: Registered protocol family 1 [ 3.675167] RPC: Registered named UNIX socket transport module. [ 3.675288] RPC: Registered udp transport module. [ 3.675322] RPC: Registered tcp transport module. [ 3.675354] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 3.677239] PCI: CLS 0 bytes, default 64 [ 3.679068] Trying to unpack rootfs image as initramfs... [ 4.908256] Freeing initrd memory: 9936K [ 4.910017] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 4.911097] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 4.918619] Initialise system trusted keyrings [ 4.919552] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 4.946932] NFS: Registering the id_resolver key type [ 4.947148] Key type id_resolver registered [ 4.947267] Key type id_legacy registered [ 4.947650] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 4.947774] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 4.947986] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 4.950149] fuse: init (API version 7.32) [ 5.047442] Key type asymmetric registered [ 5.047634] Asymmetric key parser 'x509' registered [ 5.048011] bounce: pool size: 64 pages [ 5.048167] io scheduler mq-deadline registered [ 5.048206] io scheduler kyber registered [ 5.074313] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 5.074526] imx-sdma 20ec000.sdma: Falling back to sysfs fallback for: imx/sdma/sdma-imx6q.bin [ 5.089161] pfuze100-regulator 2-0008: Full layer: 2, Metal layer: 1 [ 5.090160] pfuze100-regulator 2-0008: FAB: 0, FIN: 0 [ 5.090201] pfuze100-regulator 2-0008: pfuze100 found. [ 5.127988] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 33, base_baud = 5000000) is a IMX [ 6.082997] printk: console [ttymxc0] enabled [ 6.093303] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 77, base_baud = 5000000) is a IMX [ 6.141185] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops) [ 6.148060] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops) [ 6.154612] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops) [ 6.160321] etnaviv-gpu 130000.gpu: model: GC3000, revision: 5450 [ 6.167468] etnaviv-gpu 134000.gpu: model: GC320, revision: 5303 [ 6.173736] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1216 [ 6.179959] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 [ 6.189512] [drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor 0 [ 6.210289] imx-ipuv3 2400000.ipu: IPUv3H probed [ 6.223896] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_crtc_ops) [ 6.231974] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_crtc_ops) [ 6.240117] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops ipu_crtc_ops) [ 6.248120] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops ipu_crtc_ops) [ 6.257014] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with HDCP (DWC HDMI 3D TX PHY) [ 6.274241] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops) [ 6.285126] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1 [ 6.295007] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 6.303333] imx-ipuv3 2800000.ipu: IPUv3H probed [ 6.347440] brd: module loaded [ 6.401210] loop: module loaded [ 6.407917] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024 [ 6.415963] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480 [ 6.424003] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000 [ 6.432276] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 [ 6.440327] ahci-imx 2200000.sata: supply ahci not found, using dummy regulator [ 6.448565] ahci-imx 2200000.sata: supply phy not found, using dummy regulator [ 6.456320] ahci-imx 2200000.sata: supply target not found, using dummy regulator [ 6.467521] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled [ 6.474645] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 6.483470] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 6.497565] scsi host0: ahci-imx [ 6.502909] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 84 [ 6.526288] CAN device driver interface [ 6.538674] pps pps0: new PPS source ptp0 [ 6.589340] fec 2188000.ethernet eth0: registered PHC device 0 [ 6.599892] usbcore: registered new interface driver r8152 [ 6.605644] usbcore: registered new interface driver lan78xx [ 6.611514] usbcore: registered new interface driver asix [ 6.617139] usbcore: registered new interface driver ax88179_178a [ 6.623382] usbcore: registered new interface driver cdc_ether [ 6.629485] usbcore: registered new interface driver smsc95xx [ 6.635432] usbcore: registered new interface driver net1080 [ 6.641238] usbcore: registered new interface driver cdc_subset [ 6.647393] usbcore: registered new interface driver zaurus [ 6.653115] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 6.660819] usbcore: registered new interface driver cdc_ncm [ 6.666562] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 6.673120] ehci-pci: EHCI PCI platform driver [ 6.677770] ehci-mxc: Freescale On-Chip EHCI Host driver [ 6.684595] usbcore: registered new interface driver usb-storage [ 6.715367] snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc0 [ 6.721599] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01T00:00:00 UTC (0) [ 6.731301] i2c /dev entries driver [ 6.752238] Bluetooth: HCI UART driver ver 2.3 [ 6.756815] Bluetooth: HCI UART protocol H4 registered [ 6.762089] Bluetooth: HCI UART protocol LL registered [ 6.771480] sdhci: Secure Digital Host Controller Interface driver [ 6.777753] sdhci: Copyright(c) Pierre Ossman [ 6.782139] sdhci-pltfm: SDHCI platform and OF driver helper [ 6.791346] sdhci-esdhc-imx 2190000.mmc: Got CD GPIO [ 6.792786] caam 2100000.crypto: Entropy delay = 3200 [ 6.799033] sdhci-esdhc-imx 2198000.mmc: Got CD GPIO [ 6.828762] mmc0: SDHCI controller on 2190000.mmc [2190000.mmc] using ADMA [ 6.832080] mmc1: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA [ 6.843563] mmc2: SDHCI controller on 2198000.mmc [2198000.mmc] using ADMA [ 6.846185] ata1: SATA link down (SStatus 0 SControl 300) [ 6.856350] ahci-imx 2200000.sata: no device found, disabling link. [ 6.862424] caam 2100000.crypto: Instantiated RNG4 SH0 [ 6.862654] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug [ 6.923185] caam 2100000.crypto: Instantiated RNG4 SH1 [ 6.928814] caam 2100000.crypto: device ID = 0x0a16010000000000 (Era 4) [ 6.935629] caam 2100000.crypto: job rings = 2, qi = 0 [ 6.975899] caam algorithms registered in /proc/crypto [ 6.981461] mmc0: host does not support reading read-only switch, assuming write-enable [ 6.986860] caam 2100000.crypto: registering rng-caam [ 6.995857] mmc0: new high speed SDHC card at address 1234 [ 7.005368] mmcblk0: mmc0:1234 SA04G 3.64 GiB [ 7.052070] mmc2: new DDR MMC card at address 0001 [ 7.060358] mmcblk2: mmc2:0001 S10004 3.56 GiB [ 7.066048] mmcblk2boot0: mmc2:0001 S10004 partition 1 4.00 MiB [ 7.073367] mmcblk2boot1: mmc2:0001 S10004 partition 2 4.00 MiB [ 7.080970] mmcblk2rpmb: mmc2:0001 S10004 partition 3 4.00 MiB, chardev (243:0) [ 7.093052] mmcblk2: p1 p2 [ 7.118408] random: crng init done [ 7.126942] usbcore: registered new interface driver usbhid [ 7.132552] usbhid: USB HID core driver [ 7.141461] ipu1_csi0: Registered ipu1_csi0 capture as /dev/video0 [ 7.149629] ipu1_ic_prpenc: Registered ipu1_ic_prpenc capture as /dev/video1 [ 7.157781] ipu1_ic_prpvf: Registered ipu1_ic_prpvf capture as /dev/video2 [ 7.166219] ipu1_csi1: Registered ipu1_csi1 capture as /dev/video3 [ 7.173672] ipu2_csi0: Registered ipu2_csi0 capture as /dev/video4 [ 7.180991] ipu2_ic_prpenc: Registered ipu2_ic_prpenc capture as /dev/video5 [ 7.188910] ipu2_ic_prpvf: Registered ipu2_ic_prpvf capture as /dev/video6 [ 7.197218] ipu2_csi1: Registered ipu2_csi1 capture as /dev/video7 [ 7.228102] sgtl5000 1-000a: sgtl5000 revision 0x11 [ 7.239279] sgtl5000 1-000a: Using internal LDO instead of VDDD: check ER1 erratum [ 7.300806] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 7.990873] NET: Registered protocol family 10 [ 8.000441] Segment Routing with IPv6 [ 8.004284] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 8.013193] NET: Registered protocol family 17 [ 8.017790] can: controller area network core [ 8.022426] NET: Registered protocol family 29 [ 8.027036] can: raw protocol [ 8.030245] can: broadcast manager protocol [ 8.034596] can: netlink gateway - max_hops=1 [ 8.039603] Key type dns_resolver registered [ 8.060474] Registering SWP/SWPB emulation handler [ 8.065956] Loading compiled-in X.509 certificates [ 8.214371] imx_usb 2184200.usb: No over current polarity defined [ 8.225689] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 8.231449] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 8.265175] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 8.273196] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 8.281785] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.289131] usb usb1: Product: EHCI Host Controller [ 8.294048] usb usb1: Manufacturer: Linux 5.10.129-cip12 ehci_hcd [ 8.300243] usb usb1: SerialNumber: ci_hdrc.0 [ 8.310563] hub 1-0:1.0: USB hub found [ 8.314774] hub 1-0:1.0: 1 port detected [ 8.330810] imx_thermal 20c8000.anatop:tempmon: Automotive CPU temperature grade - max:125C critical:120C passive:115C [ 8.351730] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 8.414792] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 8.423420] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 8.424513] ALSA device list: [ 8.432166] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db [ 8.435197] #0: imx6-wandboard-sgtl5000 [ 8.447016] #1: imx-spdif [ 8.453957] Freeing unused kernel memory: 1024K [ 8.536023] Run /init as init process [ 8.634641] usb 1-1: new high-speed USB device number 2 using ci_hdrc Starting syslogd: OK Starting klogd: OK Running sysctl: [ 8.866639] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 4.01 [ 8.875114] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.882278] usb 1-1: Product: USB2.0 Hub [ 8.886327] usb 1-1: Manufacturer: GenesysLogic OK [ 8.895490] hub 1-1:1.0: USB hub found [ 8.900296] hub 1-1:1.0: 4 ports detected Populating /dev using udev: [ 8.933488] udevd[209]: starting version 3.2.9 [ 8.954448] udevd[209]: specified user 'tss' unknown [ 8.959666] udevd[209]: specified group 'tss' unknown [ 8.974095] udevd[210]: starting eudev-3.2.9 [ 9.691061] coda 2040000.vpu: Direct firmware load for vpu_fw_imx6q.bin failed with error -2 [ 9.699762] coda 2040000.vpu: Falling back to sysfs fallback for: vpu_fw_imx6q.bin [ 9.866445] ov5645 1-003c: ov5645_write_reg: write reg error -6: reg=3103, val=11 [ 9.874228] ov5645 1-003c: could not set init registers [ 9.904332] ov5645 1-003c: could not power up OV5645 done Saving random seed: OK Starting network: OK Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-782475/environment . /lava-782475/environment / # /lava-782475/bin/lava-test-runner /lava-782475/0 /lava-782475/bin/lava-test-runner /lava-782475/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-782475/0/tests/0_dmesg + cat uuid + UUID=782475_1.5.2.3.1 + set +x [ 11.286562] + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 11.404036] [ 11.508916] [ 11.614783] + set +x [ 11.626291] # / # #export SHELL=/bin/sh / # export SHELL=/bin/sh. /lava-782475/environment / # . /lava-782475/environment/lava-782475/bin/lava-test-runner /lava-782475/1 / # /lava-782475/bin/lava-test-runner /lava-782475/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-782475/1/tests/1_bootrr + cat uuid + UUID=782475_1.5.2.3.5[ 12.254164] + set +x + export 'PATH=/opt/bootrr/helpers:/lava-782475/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr + sh helpers/bootrr-auto /lava-782475/1/../bin/lava-test-case [ 13.398241] /lava-782475/1/../bin/lava-test-case [ 13.506551] /lava-782475/1/../bin/lava-test-case [ 13.567064] + set +x [ 13.609908] / #