connecting to NetworkSerialPort(target=Target(name='imx6qp-wandboard-revd1-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4009, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4009 connected to 10.8.254.5 (port 4009) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2020.05.0-00156-g60b1a02e5a-dirty #28 Sat Jun 27 00:22:32 CEST 2020 Board: Technexion EDM1-CF-IMX6 Quad Plus with PMIC and fairy baseboard detected i.MX6 Quad Plus revision 2.0 i.MX reset reason POR (SRSR: 0x00000001) i.MX6 Quad Plus unique ID: e1fdfca7020b09d4 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2190000.usdhc@2190000.of: registered as mmc0 imx-esdhc 2194000.usdhc@2194000.of: registered as mmc1 imx-esdhc 2198000.usdhc@2198000.of: registered as mmc2 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-ipuv3 2800000.ipu@2800000.of: IPUv3H probed imx-ldb ldb.of: Neither display timings in ldb node nor remote panel found netconsole: registered as netconsole-1 malloc space: 0x4fe7a7c0 -> 0x8fcf4f7f (size 1022.5 MiB) [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/768265/tftp-deploy-v34gw00d/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/768265/tftp-deploy-v34gw00d/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/768265/tftp-deploy-v34gw00d/kernel/zImage [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/768265/tftp-deploy-v34gw00d/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/768265/tftp-deploy-v34gw00d/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/768265/tftp-deploy-v34gw00d/kernel/zImage eth0: 1000Mbps full duplex link detected [33mWARNING:[0m eth0: No MAC address set. Using random address a6:a6:ca:0b:b5:49 T eth0: DHCP client bound to address 10.8.254.254 Loading ARM Linux zImage '/mnt/tftp/768265/tftp-deploy-v34gw00d/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x13224000 T no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/768265/tftp-deploy-v34gw00d/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x189b32a2 Loading devicetree from '/mnt/tftp/768265/tftp-deploy-v34gw00d/dtb/imx6qp-wandboard-revd1.dtb' commandline: console=ttymxc0,115200n8 Starting kernel at 0x13224000, initrd at 0x18000000, oftree at 0x189b4000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.129-cip12 (KernelCI@build-j333570-arm-gcc-10-imx-v6-v7-defconfig-dml7h) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Fri Jul 8 22:45:09 UTC 2022 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wandboard i.MX6 QuadPlus Board revD1 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0x8a000000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000010000000-0x000000003fffffff] [ 0.000000] HighMem [mem 0x0000000040000000-0x000000008fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000010000000-0x000000008fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000008fffffff] [ 0.000000] percpu: Embedded 20 pages/cpu s51884 r8192 d21844 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752 [ 0.000000] Kernel command line: console=ttymxc0,115200n8 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1972752K/2097152K available (14336K kernel code, 2022K rwdata, 4840K rodata, 1024K init, 6661K bss, 58864K reserved, 65536K cma-reserved, 1244144K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Running RCU self tests [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU lockdep checking is enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76470001 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000010] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000041] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.001802] Console: colour dummy device 80x30 [ 0.001853] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001876] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001898] ... MAX_LOCK_DEPTH: 48 [ 0.001919] ... MAX_LOCKDEP_KEYS: 8192 [ 0.001941] ... CLASSHASH_SIZE: 4096 [ 0.001963] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001985] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.002008] ... CHAINHASH_SIZE: 32768 [ 0.002029] memory used by lock dependency info: 4061 kB [ 0.002051] memory used for stack traces: 2112 kB [ 0.002073] per task-struct memory footprint: 1536 bytes [ 0.002194] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.002239] pid_max: default: 32768 minimum: 301 [ 0.002639] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.002685] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.006241] CPU: Testing write buffer coherency: ok [ 0.006381] CPU0: Spectre v2: using BPIALL workaround [ 0.007446] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.010697] Setting up static identity map for 0x10100000 - 0x10100078 [ 0.011451] rcu: Hierarchical SRCU implementation. [ 0.014013] smp: Bringing up secondary CPUs ... [ 0.017316] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.017334] CPU1: Spectre v2: using BPIALL workaround [ 0.021624] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.021640] CPU2: Spectre v2: using BPIALL workaround [ 0.024908] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.024924] CPU3: Spectre v2: using BPIALL workaround [ 0.025675] smp: Brought up 1 node, 4 CPUs [ 0.025713] SMP: Total of 4 processors activated (24.00 BogoMIPS). [ 0.025744] CPU: All CPU(s) started in SVC mode. [ 0.028600] devtmpfs: initialized [ 0.071481] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.074344] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.074433] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.078528] pinctrl core: initialized pinctrl subsystem [ 0.085230] NET: Registered protocol family 16 [ 0.113742] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.119592] thermal_sys: Registered thermal governor 'step_wise' [ 0.120140] cpuidle: using governor menu [ 0.120300] CPU identified as i.MX6QP, silicon rev 1.0 [ 0.609359] vdd1p1: supplied by regulator-dummy [ 0.635042] vdd3p0: supplied by regulator-dummy [ 0.659972] vdd2p5: supplied by regulator-dummy [ 0.684898] vddarm: supplied by regulator-dummy [ 0.710933] vddpu: supplied by regulator-dummy [ 0.735195] vddsoc: supplied by regulator-dummy [ 1.858680] No ATAGs? [ 1.859288] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 1.859397] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 1.865769] imx6q-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver [ 1.988453] mxs-dma 110000.dma-apbh: initialized [ 1.996668] imx6q-pinctrl 20e0000.pinctrl: pin MX6Q_PAD_EIM_D22 already requested by 20e0000.pinctrl; cannot claim for regulator-usbotgvbus [ 1.996715] imx6q-pinctrl 20e0000.pinctrl: pin-42 (regulator-usbotgvbus) status -22 [ 1.996752] imx6q-pinctrl 20e0000.pinctrl: could not request pin 42 (MX6Q_PAD_EIM_D22) from group usbotgvbusgrp on device 20e0000.pinctrl [ 1.996790] reg-fixed-voltage regulator-usbotgvbus: Error applying setting, reverse things back [ 1.996900] reg-fixed-voltage: probe of regulator-usbotgvbus failed with error -22 [ 2.002040] vgaarb: loaded [ 2.004517] SCSI subsystem initialized [ 2.006444] usbcore: registered new interface driver usbfs [ 2.006732] usbcore: registered new interface driver hub [ 2.006931] usbcore: registered new device driver usb [ 2.007401] usb_phy_generic usbphynop1: supply vcc not found, using dummy regulator [ 2.008276] usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests [ 2.008788] usb_phy_generic usbphynop2: supply vcc not found, using dummy regulator [ 2.009644] usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests [ 2.014147] i2c i2c-0: IMX I2C adapter registered [ 2.023228] i2c i2c-1: IMX I2C adapter registered [ 2.030088] i2c i2c-2: IMX I2C adapter registered [ 2.031279] mc: Linux media interface: v0.10 [ 2.031459] videodev: Linux video capture interface: v2.00 [ 2.032161] pps_core: LinuxPPS API ver. 1 registered [ 2.032195] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.032278] PTP clock support registered [ 2.034342] Advanced Linux Sound Architecture Driver Initialized. [ 2.040180] Bluetooth: Core ver 2.22 [ 2.040349] NET: Registered protocol family 31 [ 2.040383] Bluetooth: HCI device and connection manager initialized [ 2.040524] Bluetooth: HCI socket layer initialized [ 2.040578] Bluetooth: L2CAP socket layer initialized [ 2.040781] Bluetooth: SCO socket layer initialized [ 2.043545] clocksource: Switched to clocksource mxc_timer1 [ 3.625340] VFS: Disk quotas dquot_6.6.0 [ 3.625574] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 3.664636] NET: Registered protocol family 2 [ 3.665348] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 3.668512] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 22528 bytes, linear) [ 3.669119] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 3.669311] TCP bind hash table entries: 8192 (order: 6, 327680 bytes, linear) [ 3.670520] TCP: Hash tables configured (established 8192 bind 8192) [ 3.671277] UDP hash table entries: 512 (order: 3, 49152 bytes, linear) [ 3.671504] UDP-Lite hash table entries: 512 (order: 3, 49152 bytes, linear) [ 3.672289] NET: Registered protocol family 1 [ 3.675282] RPC: Registered named UNIX socket transport module. [ 3.675401] RPC: Registered udp transport module. [ 3.675434] RPC: Registered tcp transport module. [ 3.675467] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 3.677368] PCI: CLS 0 bytes, default 64 [ 3.679160] Trying to unpack rootfs image as initramfs... [ 4.907435] Freeing initrd memory: 9936K [ 4.909184] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 4.910241] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 4.918268] Initialise system trusted keyrings [ 4.919241] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 4.946345] NFS: Registering the id_resolver key type [ 4.946558] Key type id_resolver registered [ 4.946669] Key type id_legacy registered [ 4.947057] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 4.947181] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 4.947397] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 4.949558] fuse: init (API version 7.32) [ 5.046700] Key type asymmetric registered [ 5.046887] Asymmetric key parser 'x509' registered [ 5.047258] bounce: pool size: 64 pages [ 5.047415] io scheduler mq-deadline registered [ 5.047452] io scheduler kyber registered [ 5.073686] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 5.073811] imx-sdma 20ec000.sdma: Falling back to sysfs fallback for: imx/sdma/sdma-imx6q.bin [ 5.088279] pfuze100-regulator 2-0008: Full layer: 2, Metal layer: 1 [ 5.089336] pfuze100-regulator 2-0008: FAB: 0, FIN: 0 [ 5.089379] pfuze100-regulator 2-0008: pfuze100 found. [ 5.127883] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 33, base_baud = 5000000) is a IMX [ 6.082536] printk: console [ttymxc0] enabled [ 6.092855] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 77, base_baud = 5000000) is a IMX [ 6.140868] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops) [ 6.147733] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops) [ 6.154352] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops) [ 6.160060] etnaviv-gpu 130000.gpu: model: GC3000, revision: 5450 [ 6.167183] etnaviv-gpu 134000.gpu: model: GC320, revision: 5303 [ 6.173538] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1216 [ 6.179673] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 [ 6.189227] [drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor 0 [ 6.209987] imx-ipuv3 2400000.ipu: IPUv3H probed [ 6.223811] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_crtc_ops) [ 6.231799] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_crtc_ops) [ 6.239885] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops ipu_crtc_ops) [ 6.247843] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops ipu_crtc_ops) [ 6.256757] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with HDCP (DWC HDMI 3D TX PHY) [ 6.273948] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops) [ 6.284751] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1 [ 6.294663] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 6.302995] imx-ipuv3 2800000.ipu: IPUv3H probed [ 6.346689] brd: module loaded [ 6.400426] loop: module loaded [ 6.407070] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024 [ 6.415126] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480 [ 6.423165] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000 [ 6.431438] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 [ 6.439511] ahci-imx 2200000.sata: supply ahci not found, using dummy regulator [ 6.447691] ahci-imx 2200000.sata: supply phy not found, using dummy regulator [ 6.455440] ahci-imx 2200000.sata: supply target not found, using dummy regulator [ 6.466714] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled [ 6.473851] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 6.482676] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 6.496702] scsi host0: ahci-imx [ 6.502035] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 84 [ 6.525661] CAN device driver interface [ 6.537965] pps pps0: new PPS source ptp0 [ 6.588595] fec 2188000.ethernet eth0: registered PHC device 0 [ 6.599120] usbcore: registered new interface driver r8152 [ 6.604872] usbcore: registered new interface driver lan78xx [ 6.610729] usbcore: registered new interface driver asix [ 6.616356] usbcore: registered new interface driver ax88179_178a [ 6.622599] usbcore: registered new interface driver cdc_ether [ 6.628705] usbcore: registered new interface driver smsc95xx [ 6.634673] usbcore: registered new interface driver net1080 [ 6.640478] usbcore: registered new interface driver cdc_subset [ 6.646597] usbcore: registered new interface driver zaurus [ 6.652315] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 6.660000] usbcore: registered new interface driver cdc_ncm [ 6.665743] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 6.672300] ehci-pci: EHCI PCI platform driver [ 6.676951] ehci-mxc: Freescale On-Chip EHCI Host driver [ 6.683758] usbcore: registered new interface driver usb-storage [ 6.714562] snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc0 [ 6.720798] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01T00:00:00 UTC (0) [ 6.730510] i2c /dev entries driver [ 6.751701] Bluetooth: HCI UART driver ver 2.3 [ 6.756259] Bluetooth: HCI UART protocol H4 registered [ 6.761531] Bluetooth: HCI UART protocol LL registered [ 6.770918] sdhci: Secure Digital Host Controller Interface driver [ 6.777193] sdhci: Copyright(c) Pierre Ossman [ 6.781583] sdhci-pltfm: SDHCI platform and OF driver helper [ 6.790886] sdhci-esdhc-imx 2190000.mmc: Got CD GPIO [ 6.793049] caam 2100000.crypto: Entropy delay = 3200 [ 6.795127] sdhci-esdhc-imx 2198000.mmc: Got CD GPIO [ 6.831960] mmc1: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA [ 6.832899] mmc0: SDHCI controller on 2190000.mmc [2190000.mmc] using ADMA [ 6.836334] ata1: SATA link down (SStatus 0 SControl 300) [ 6.836734] ahci-imx 2200000.sata: no device found, disabling link. [ 6.836752] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug [ 6.841229] mmc2: SDHCI controller on 2198000.mmc [2198000.mmc] using ADMA [ 6.867038] caam 2100000.crypto: Instantiated RNG4 SH0 [ 6.907299] mmc0: host does not support reading read-only switch, assuming write-enable [ 6.918067] mmc0: new high speed SDHC card at address 1234 [ 6.927566] mmcblk0: mmc0:1234 SA04G 3.64 GiB [ 6.927802] caam 2100000.crypto: Instantiated RNG4 SH1 [ 6.937546] caam 2100000.crypto: device ID = 0x0a16010000000000 (Era 4) [ 6.944282] caam 2100000.crypto: job rings = 2, qi = 0 [ 6.982071] caam algorithms registered in /proc/crypto [ 6.989253] mmc2: new DDR MMC card at address 0001 [ 6.992731] caam 2100000.crypto: registering rng-caam [ 6.996534] mmcblk2: mmc2:0001 S10004 3.56 GiB [ 7.005654] mmcblk2boot0: mmc2:0001 S10004 partition 1 4.00 MiB [ 7.013059] mmcblk2boot1: mmc2:0001 S10004 partition 2 4.00 MiB [ 7.021148] mmcblk2rpmb: mmc2:0001 S10004 partition 3 4.00 MiB, chardev (243:0) [ 7.034589] mmcblk2: p1 p2 [ 7.122046] random: crng init done [ 7.127388] usbcore: registered new interface driver usbhid [ 7.132994] usbhid: USB HID core driver [ 7.142085] ipu1_csi0: Registered ipu1_csi0 capture as /dev/video0 [ 7.150282] ipu1_ic_prpenc: Registered ipu1_ic_prpenc capture as /dev/video1 [ 7.158377] ipu1_ic_prpvf: Registered ipu1_ic_prpvf capture as /dev/video2 [ 7.166706] ipu1_csi1: Registered ipu1_csi1 capture as /dev/video3 [ 7.174201] ipu2_csi0: Registered ipu2_csi0 capture as /dev/video4 [ 7.181153] ipu2_ic_prpenc: Registered ipu2_ic_prpenc capture as /dev/video5 [ 7.189094] ipu2_ic_prpvf: Registered ipu2_ic_prpvf capture as /dev/video6 [ 7.197295] ipu2_csi1: Registered ipu2_csi1 capture as /dev/video7 [ 7.228086] sgtl5000 1-000a: sgtl5000 revision 0x11 [ 7.238872] sgtl5000 1-000a: Using internal LDO instead of VDDD: check ER1 erratum [ 7.299520] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 7.989433] NET: Registered protocol family 10 [ 7.998851] Segment Routing with IPv6 [ 8.002707] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 8.011623] NET: Registered protocol family 17 [ 8.016252] can: controller area network core [ 8.020898] NET: Registered protocol family 29 [ 8.025501] can: raw protocol [ 8.028710] can: broadcast manager protocol [ 8.032967] can: netlink gateway - max_hops=1 [ 8.038065] Key type dns_resolver registered [ 8.058900] Registering SWP/SWPB emulation handler [ 8.064437] Loading compiled-in X.509 certificates [ 8.212645] imx_usb 2184200.usb: No over current polarity defined [ 8.223634] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 8.229377] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 8.264366] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 8.272428] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 8.281024] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.288368] usb usb1: Product: EHCI Host Controller [ 8.293282] usb usb1: Manufacturer: Linux 5.10.129-cip12 ehci_hcd [ 8.299476] usb usb1: SerialNumber: ci_hdrc.0 [ 8.309805] hub 1-0:1.0: USB hub found [ 8.314075] hub 1-0:1.0: 1 port detected [ 8.330004] imx_thermal 20c8000.anatop:tempmon: Automotive CPU temperature grade - max:125C critical:120C passive:115C [ 8.350931] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 8.413679] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 8.422259] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 8.423519] ALSA device list: [ 8.431004] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db [ 8.434062] #0: imx6-wandboard-sgtl5000 [ 8.445781] #1: imx-spdif [ 8.452448] Freeing unused kernel memory: 1024K [ 8.485046] Run /init as init process [ 8.623994] usb 1-1: new high-speed USB device number 2 using ci_hdrc Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: [ 8.855504] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 4.01 [ 8.864079] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.871307] usb 1-1: Product: USB2.0 Hub [ 8.875408] usb 1-1: Manufacturer: GenesysLogic [ 8.881891] udevd[208]: starting version 3.2.9 [ 8.884865] hub 1-1:1.0: USB hub found [ 8.891194] hub 1-1:1.0: 4 ports detected [ 8.901448] udevd[208]: specified user 'tss' unknown [ 8.906753] udevd[208]: specified group 'tss' unknown [ 8.920118] udevd[209]: starting eudev-3.2.9 [ 9.598276] coda 2040000.vpu: Direct firmware load for vpu_fw_imx6q.bin failed with error -2 [ 9.607283] coda 2040000.vpu: Falling back to sysfs fallback for: vpu_fw_imx6q.bin [ 9.818583] ov5645 1-003c: ov5645_write_reg: write reg error -6: reg=3103, val=11 [ 9.826426] ov5645 1-003c: could not set init registers [ 9.847621] ov5645 1-003c: could not power up OV5645 done Saving random seed: OK Starting network: OK Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-768265/environment . /lava-768265/environment / # /lava-768265/bin/lava-test-runner /lava-768265/0 /lava-768265/bin/lava-test-runner /lava-768265/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-768265/0/tests/0_dmesg + cat uuid + UUID=768265_1.5.2.3.1[ 11.237200] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 11.355644] [ 11.458797] [ 11.557544] + set +x [ 11.568853] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-768265/environment / # . /lava-768265/environment/lava-768265/bin/lava-test-runner /lava-768265/1 / # /lava-768265/bin/lava-test-runner /lava-768265/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-768265/1/tests/1_bootrr + cat uuid + UUID=768265_1.5.2.3.5[ 12.185676] + set +x + export 'PATH=/opt/bootrr/helpers:/lava-768265/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr + sh helpers/bootrr-auto /lava-768265/1/../bin/lava-test-case [ 13.326844] /lava-768265/1/../bin/lava-test-case [ 13.435169] /lava-768265/1/../bin/lava-test-case [ 13.494799] + set +x [ 13.537771] / #