[Enter `^Ec?' for help] U-Boot 2016.03-rc1-00131-g39af3d8-dirty (Feb 09 2016 - 16:39:49 +0000) DRAM: 944 MiB WARNING: Caches not enabled RPI Model B+ (0x10) MMC: bcm2835_sdhci: 0 reading uboot.env In: serial Out: lcd Err: lcd Net: Net Initialization Skipped No ethernet found. starting USB... USB0: Core Release: 2.80a scanning bus 0 for devices... 4 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found Hit any key to stop autoboot: 2  0 U-Boot> usb start usb start U-Boot> setenv autoload no setenv autoload no U-Boot> setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff U-Boot> setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff U-Boot> dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.101.219 (497 ms) U-Boot> setenv serverip 192.168.101.1 setenv serverip 192.168.101.1 U-Boot> tftp 0x01000000 6963036/tftp-deploy-gagzgt2y/kernel/zImage tftp 0x01000000 6963036/tftp-deploy-gagzgt2y/kernel/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.101.1; our IP address is 192.168.101.219 Filename '6963036/tftp-deploy-gagzgt2y/kernel/zImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ##### 493.2 KiB/s done Bytes transferred = 5787320 (584eb8 hex) U-Boot> tftp 0x02200000 6963036/tftp-deploy-gagzgt2y/ramdisk/ramdisk.cpio.gz.uboot tftp 0x02200000 6963036/tftp-deploy-gagzgt2y/ramdisk/ramdisk.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.101.1; our IP address is 192.168.101.219 Filename '6963036/tftp-deploy-gagzgt2y/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x2200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################# 843.8 KiB/s done Bytes transferred = 9241221 (8d0285 hex) U-Boot> setenv initrd_size ${filesize} setenv initrd_size ${filesize} U-Boot> tftp 0x00000100 6963036/tftp-deploy-gagzgt2y/dtb/bcm2836-rpi-2-b.dtb tftp 0x00000100 6963036/tftp-deploy-gagzgt2y/dtb/bcm2836-rpi-2-b.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.101.1; our IP address is 192.168.101.219 Filename '6963036/tftp-deploy-gagzgt2y/dtb/bcm2836-rpi-2-b.dtb'. Load address: 0x100 Loading: *# 786.1 KiB/s done Bytes transferred = 13687 (3577 hex) U-Boot> setenv bootargs 'console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' setenv bootargs 'console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' U-Boot> bootz 0x01000000 0x02200000 0x00000100 bootz 0x01000000 0x02200000 0x00000100 Kernel image @ 0x1000000 [ 0x000000 - 0x584eb8 ] ## Loading init Ramdisk from Legacy Image at 02200000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 9241157 Bytes = 8.8 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 00000100 Booting using the fdt blob at 0x000100 reserving fdt memory region: addr=0 size=1000 Using Device Tree in place at 00000100, end 00006676 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.131-cip13 (KernelCI@build-j448517-arm-gcc-10-bcm2835-defconfig-c8xpf) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 Wed Aug 3 16:41:47 UTC 2022 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 2 Model B [ 0.000000] earlycon: pl11 at MMIO 0x3f201000 (options '115200n8') [ 0.000000] printk: bootconsole [pl11] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Ignoring RAM at 0x30000000-0x3b000000 [ 0.000000] Consider using a HIGHMEM enabled kernel. [ 0.000000] Reserved memory: created CMA memory pool at 0x2c000000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm/kernel/devtree.c:148 arm_dt_init_cpu_maps+0x1b8/0x200 [ 0.000000] DT /cpu 2 nodes greater than max cores 1, capping them [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.10.131-cip13 #1 [ 0.000000] Hardware name: BCM2835 [ 0.000000] Backtrace: [ 0.000000] [] (dump_backtrace) from [] (show_stack+0x20/0x24) [ 0.000000] r7:c0e01edc r6:00000000 r5:00000009 r4:c0bbb446 [ 0.000000] [] (show_stack) from [] (dump_stack+0x28/0x30) [ 0.000000] [] (dump_stack) from [] (__warn+0xcc/0xf8) [ 0.000000] r5:00000009 r4:c0b325e8 [ 0.000000] [] (__warn) from [] (warn_slowpath_fmt+0x88/0xcc) [ 0.000000] r9:c0f753c8 r8:c0b32661 r7:00000009 r6:c0d04d08 r5:00000094 r4:c0b325e8 [ 0.000000] [] (warn_slowpath_fmt) from [] (arm_dt_init_cpu_maps+0x1b8/0x200) [ 0.000000] r8:c0b32595 r7:00000000 r6:ff000000 r5:00000000 r4:eb9d96c4 [ 0.000000] [] (arm_dt_init_cpu_maps) from [] (setup_arch+0x26c/0x644) [ 0.000000] r10:c0e01f70 r9:c0e01f68 r8:ebffff00 r7:c0bc90c8 r6:2fffffff r5:c0e08730 [ 0.000000] r4:c0d33e48 [ 0.000000] [] (setup_arch) from [] (start_kernel+0x64/0x520) [ 0.000000] r10:10c53c7d r9:410fc075 r8:00000100 r7:c0f8f03c r6:c0e04240 r5:00000051 [ 0.000000] r4:c0d004b0 [ 0.000000] [] (start_kernel) from [<00000000>] (0x0) [ 0.000000] r9:410fc075 r8:00000100 r7:00000000 r6:10c03c7d r5:00000051 r4:c0d004b0 [ 0.000000] ---[ end trace 58996bc4bee07162 ]--- [ 0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 195072 [ 0.000000] Kernel co# mmand line: console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 689080K/786432K available (8192K kernel code, 1593K rwdata, 3240K rodata, 1024K init, 711K bss, 31816K reserved, 65536K cma-reserved) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 <6>[ 0.000000] ftrace: allocating 32604 entries in 96 pages <6>[ 0.000000] ftrace: allocated 96 pages with 2 groups <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <3>[ 0.000000] [Firmware Bug]: Bootloader left irq enabled: bank 1 irq 9 <6>[ 0.000022] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns <6>[ 0.008821] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns <6>[ 0.018650] bcm2835: system timer (irq = 27) <6>[ 0.023767] arch_timer: cp15 timer(s) running at 19.20MHz (virt). <6>[ 0.030260] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns <6>[ 0.041525] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns <6>[ 0.049954] Switching to timer-based delay loop, resolution 52ns <6>[ 0.056750] Console: colour dummy device 80x30 <6>[ 0.061613] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) <6>[ 0.072454] pid_max: default: 32768 minimum: 301 <6>[ 0.077803] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.085556] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.094759] CPU: Testing write buffer coherency: ok <6>[ 0.101110] Setting up static identity map for 0x100000 - 0x100054 <6>[ 0.109433] devtmpfs: initialized <6>[ 0.119198] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 <6>[ 0.127596] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.137917] futex hash table entries: 256 (order: -1, 3072 bytes, linear) <6>[ 0.148357] pinctrl core: initialized pinctrl subsystem <6>[ 0.155959] NET: Registered protocol family 16 <6>[ 0.162852] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.173508] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.173976] No ATAGs? <6>[ 0.182997] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. <6>[ 0.191425] hw-breakpoint: maximum watchpoint size is 8 bytes. <6>[ 0.197967] Serial: AMBA PL011 UART driver <6>[ 0.223374] Kprobes globally optimized <5>[ 0.232768] SCSI subsystem initialized <6>[ 0.237187] usbcore: registered new interface driver usbfs <6>[ 0.243192] usbcore: registered new interface driver hub <6>[ 0.248933] usbcore: registered new device driver usb <4>[ 0.254612] usb_phy_generic phy: supply vcc not found, using dummy regulator <4>[ 0.262263] usb_phy_generic phy: dummy supplies not allowed for exclusive requests <6>[ 0.270531] mc: Linux media interface: v0.10 <6>[ 0.275201] videodev: Linux video capture interface: v2.00 <6>[ 0.281340] Advanced Linux Sound Architecture Driver Initialized. <6>[ 0.288549] Bluetooth: Core ver 2.22 <6>[ 0.292564] NET: Registered protocol family 31 <6>[ 0.297364] Bluetooth: HCI device and connection manager initialized <6>[ 0.304127] Bluetooth: HCI socket layer initialized <6>[ 0.309364] Bluetooth: L2CAP socket layer initialized <6>[ 0.314804] Bluetooth: SCO socket layer initialized <6>[ 0.320597] clocksource: Switched to clocksource arch_sys_counter <6>[ 0.571041] simple-framebuffer 3b006000.framebuffer: framebuffer at 0x3b006000, 0x85400 bytes, mapped to 0x(ptrval) <6>[ 0.582008] simple-framebuffer 3b006000.framebuffer: format=r5g6b5, mode=656x416x16, linelength=1312 <6>[ 0.595383] Console: switching to colour frame buffer device 82x26 <6>[ 0.604982] simple-framebuffer 3b006000.framebuffer: fb0: simplefb registered! <6>[ 0.622659] NET: Registered protocol family 2 <6>[ 0.627873] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 0.637307] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) <6>[ 0.646195] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 0.654453] TCP bind hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 0.662094] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 0.669071] UDP hash table entries: 512 (order: 1, 8192 bytes, linear) <6>[ 0.676045] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes, linear) <6>[ 0.683632] NET: Registered protocol family 1 <6>[ 0.689092] RPC: Registered named UNIX socket transport module. <6>[ 0.695438] RPC: Registered udp transport module. <6>[ 0.700497] RPC: Registered tcp transport module. <6>[ 0.705567] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.714362] Unpacking initramfs... <6>[ 1.504728] Freeing initrd memory: 9028K <6>[ 1.510136] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available <5>[ 1.520289] Initialise system trusted keyrings <6>[ 1.525530] workingset: timestamp_bits=30 max_order=18 bucket_order=0 <6>[ 1.542919] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). <5>[ 1.669342] Key type asymmetric registered <5>[ 1.673969] Asymmetric key parser 'x509' registered <6>[ 1.679283] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) <6>[ 1.687114] io scheduler mq-deadline registered <6>[ 1.692007] io scheduler kyber registered <6>[ 1.704835] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled <6>[ 1.717046] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver <6>[ 1.728418] usbcore: registered new interface driver zd1211rw <6>[ 1.734719] usbcore: registered new interface driver lan78xx <6>[ 1.740836] usbcore: registered new interface driver asix <6>[ 1.746665] usbcore: registered new interface driver ax88179_178a <6>[ 1.753206] usbcore: registered new interface driver cdc_ether <6>[ 1.759501] usbcore: registered new interface driver smsc95xx <6>[ 1.765689] usbcore: registered new interface driver net1080 <6>[ 1.771787] usbcore: registered new interface driver cdc_subset <6>[ 1.778130] usbcore: registered new interface driver zaurus <6>[ 1.784223] usbcore: registered new interface driver cdc_ncm <6>[ 1.790960] usbcore: registered new interface driver usb-storage <6>[ 1.797540] i2c /dev entries driver <4>[ 1.803814] i2c-bcm2835 3f805000.i2c: Could not read clock-frequency property <6>[ 1.813320] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer <6>[ 1.820483] sdhci: Secure Digital Host Controller Interface driver <6>[ 1.827075] sdhci: Copyright(c) Pierre Ossman <6>[ 1.832101] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 1.838967] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 1.846460] usbcore: registered new interface driver usbhid <6>[ 1.852459] usbhid: USB HID core driver <6>[ 1.856839] bcm2835-mbox 3f00b880.mailbox: mailbox enabled <6>[ 1.864832] NET: Registered protocol family 10 <6>[ 1.871079] Segment Routing with IPv6 <6>[ 1.875199] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 1.882454] NET: Registered protocol family 17 <6>[ 1.887803] oprofile: using timer interrupt. <5>[ 1.892840] Loading compiled-in X.509 certificates <6>[ 1.904629] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 81, base_baud = 0) is a PL011 rev2 <6>[ 1.914145] printk: console [ttyAMA0] enabled <6>[ 1.914145] printk: console [ttyAMA0] enabled <6>[ 1.923485] printk: bootconsole [pl11] disabled <6>[ 1.923485] printk: bootconsole [pl11] disabled <6>[ 1.936923] raspberrypi-firmware soc:firmware: Attached to firmware from 2014-12-19T18:44:06 <4>[ 1.948612] ------------[ cut here ]------------ <4>[ 1.953579] WARNING: CPU: 0 PID: 44 at drivers/cpufreq/cpufreq-dt.c:79 dt_cpufreq_probe+0xf8/0x2f0 <4>[ 1.962803] Modules linked in: <4>[ 1.966130] CPU: 0 PID: 44 Comm: kworker/0:2 Tainted: G W 5.10.131-cip13 #1 <4>[ 1.974653] Hardware name: BCM2835 <4>[ 1.978328] Workqueue: events deferred_probe_work_func <4>[ 1.983733] Backtrace: <4>[ 1.986458] [] (dump_backtrace) from [] (show_stack+0x20/0x24) <4>[ 1.994290] r7:00000000 r6:00000000 r5:00000009 r4:c0bbb446 <4>[ 2.000211] [] (show_stack) from [] (dump_stack+0x28/0x30) <4>[ 2.007709] [] (dump_stack) from [] (__warn+0xcc/0xf8) <4>[ 2.014844] r5:00000009 r4:c0ba3fde <4>[ 2.018683] [] (__warn) from [] (warn_slowpath_fmt+0x88/0xcc) <4>[ 2.026431] r9:c46e5bc8 r8:00000000 r7:00000009 r6:c0628754 r5:0000004f r4:c0ba3fde <4>[ 2.034441] [] (warn_slowpath_fmt) from [] (dt_cpufreq_probe+0xf8/0x2f0) <4>[ 2.043141] r8:00000000 r7:c46e4a10 r6:c46e5bc0 r5:c0e08860 r4:00000000 <4>[ 2.050102] [] (dt_cpufreq_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.058803] r10:00000003 r9:c1031744 r8:00000000 r7:c103173c r6:c0f357fc r5:c46e4a10 <4>[ 2.066904] r4:00000000 <4>[ 2.069704] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.078231] r7:c103173c r6:c0f357fc r5:00000000 r4:c46e4a10 <4>[ 2.084160] [] (really_probe) from [] (driver_probe_device+0x19c/0x1c8) <4>[ 2.092776] r10:00000003 r9:00000000 r8:c0f24f38 r7:c46e4a10 r6:c46937fc r5:c0f357fc <4>[ 2.100862] r4:c46e4a10 <4>[ 2.103660] [] (driver_probe_device) from [] (__device_attach_driver+0xa0/0xf4) <4>[ 2.112972] r9:00000000 r8:c0f24f38 r7:c46e4a10 r6:c46937fc r5:c0f357fc r4:00000001 <4>[ 2.120982] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.130017] r7:c46e4a54 r6:c05182f0 r5:c46937fc r4:00000000 <4>[ 2.135945] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.144469] r6:c46e4a10 r5:00000001 r4:c46e4a10 <4>[ 2.149347] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.158133] r7:00000000 r6:c46e4a10 r5:c0f24ee0 r4:c46e4a10 <4>[ 2.164077] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.172958] [] (bus_probe_device) from [] (device_add+0x5d4/0x6f8) <4>[ 2.181138] r7:00000000 r6:c0f24bd8 r5:00000000 r4:c46e4a10 <4>[ 2.187057] [] (device_add) from [] (platform_device_add+0x190/0x1f8) <4>[ 2.195498] r9:c0e0b378 r8:c0e0b358 r7:05f5e100 r6:00000000 r5:00000000 r4:c46e4a00 <4>[ 2.203509] [] (platform_device_add) from [] (platform_device_register_full+0xf0/0x124) <4>[ 2.213511] r9:05f5e0ff r8:2faf0800 r7:05f5e100 r6:c46938e0 r5:00000000 r4:c46e4a00 <4>[ 2.221521] [] (platform_device_register_full) from [] (raspberrypi_cpufreq_probe+0x10c/0x198) <4>[ 2.232127] r7:05f5e100 r6:c0e08860 r5:00000000 r4:00000000 <4>[ 2.238046] [] (raspberrypi_cpufreq_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.247533] r9:c1031744 r8:00000000 r7:c103173c r6:c0f358f4 r5:c46e4610 r4:00000000 <4>[ 2.255544] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.264070] r7:c103173c r6:c0f358f4 r5:00000000 r4:c46e4610 <4>[ 2.269988] [] (really_probe) from [] (driver_probe_device+0x19c/0x1c8) <4>[ 2.278606] r10:c46e52c0 r9:00000000 r8:c46e4410 r7:c46e4610 r6:c4693a2c r5:c0f358f4 <4>[ 2.286697] r4:c46e4610 <4>[ 2.289496] [] (driver_probe_device) from [] (__device_attach_driver+0xa0/0xf4) <4>[ 2.298814] r9:00000000 r8:c46e4410 r7:c46e4610 r6:c4693a2c r5:c0f358f4 r4:00000001 <4>[ 2.306825] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.315870] r7:c46e4654 r6:c05182f0 r5:c4693a2c r4:00000000 <4>[ 2.321799] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.330312] r6:c46e4610 r5:00000001 r4:c46e4610 <4>[ 2.335200] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.343985] r7:00000000 r6:c46e4610 r5:c0f24ee0 r4:c46e4610 <4>[ 2.349903] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.358779] [] (bus_probe_device) from [] (device_add+0x5d4/0x6f8) <4>[ 2.366957] r7:00000000 r6:c0f24bd8 r5:00000000 r4:c46e4610 <4>[ 2.372886] [] (device_add) from [] (platform_device_add+0x190/0x1f8) <4>[ 2.381327] r9:c0e0b378 r8:c0e0b358 r7:00000000 r6:00000000 r5:00000000 r4:c46e4600 <4>[ 2.389328] [] (platform_device_add) from [] (platform_device_register_full+0xf0/0x124) <4>[ 2.399335] r9:c46e4410 r8:c46df150 r7:00000000 r6:c4693b18 r5:00000000 r4:c46e4600 <4>[ 2.407349] [] (platform_device_register_full) from [] (raspberrypi_clk_probe+0x160/0x31c) <4>[ 2.417607] r7:00000000 r6:00000000 r5:c46e5240 r4:00000000 <4>[ 2.423538] [] (raspberrypi_clk_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.432673] r10:00000003 r9:c1031744 r8:00000000 r7:c103173c r6:c0f1f0dc r5:c46e4410 <4>[ 2.440759] r4:00000000 <4>[ 2.443558] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.452083] r7:c103173c r6:c0f1f0dc r5:00000000 r4:c46e4410 <4>[ 2.458001] [] (really_probe) from [] (driver_probe_device+0x19c/0x1c8) <4>[ 2.466617] r10:00000003 r9:00000000 r8:c1594c10 r7:c46e4410 r6:c4693c6c r5:c0f1f0dc <4>[ 2.474702] r4:c46e4410 <4>[ 2.477502] [] (driver_probe_device) from [] (__device_attach_driver+0xa0/0xf4) <4>[ 2.486815] r9:00000000 r8:c1594c10 r7:c46e4410 r6:c4693c6c r5:c0f1f0dc r4:00000001 <4>[ 2.494824] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.503874] r7:c46e4454 r6:c05182f0 r5:c4693c6c r4:00000000 <4>[ 2.509792] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.518315] r6:c46e4410 r5:00000001 r4:c46e4410 <4>[ 2.523204] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.531989] r7:00000000 r6:c46e4410 r5:c0f24ee0 r4:c46e4410 <4>[ 2.537908] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.546783] [] (bus_probe_device) from [] (device_add+0x5d4/0x6f8) <4>[ 2.554961] r7:00000000 r6:c0f24bd8 r5:00000000 r4:c46e4410 <4>[ 2.560890] [] (device_add) from [] (platform_device_add+0x190/0x1f8) <4>[ 2.569321] r9:c0e0b378 r8:c0e0b358 r7:c1594c00 r6:00000000 r5:00000000 r4:c46e4400 <4>[ 2.577333] [] (platform_device_add) from [] (platform_device_register_full+0xf0/0x124) <4>[ 2.587335] r9:c1031744 r8:00000001 r7:c1594c00 r6:c4693d58 r5:00000000 r4:c46e4400 <4>[ 2.595347] [] (platform_device_register_full) from [] (rpi_firmware_probe+0x19c/0x1e4) <4>[ 2.605345] r7:c1594c00 r6:c1594c10 r5:c46e3280 r4:00000000 <4>[ 2.611278] [] (rpi_firmware_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.620141] r8:00000000 r7:c103173c r6:c0f37214 r5:c1594c10 r4:00000000 <4>[ 2.627112] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.635637] r7:c103173c r6:c0f37214 r5:00000000 r4:c1594c10 <4>[ 2.641567] [] (really_probe) from [] (driver_probe_device+0x19c/0x1c8) <4>[ 2.650172] r10:c0f24e34 r9:00000000 r8:00000000 r7:c1594c10 r6:c4693ea4 r5:c0f37214 <4>[ 2.658257] r4:c1594c10 <4>[ 2.661066] [] (driver_probe_device) from [] (__device_attach_driver+0xa0/0xf4) <4>[ 2.670363] r9:00000000 r8:00000000 r7:c1594c10 r6:c4693ea4 r5:c0f37214 r4:00000001 <4>[ 2.678372] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.687417] r7:c1594c54 r6:c05182f0 r5:c4693ea4 r4:00000000 <4>[ 2.693348] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.701873] r6:c1594c10 r5:00000001 r4:c1594c10 <4>[ 2.706751] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.715536] r7:eb9c7300 r6:c1594c10 r5:c0f24ee0 r4:c1594c10 <4>[ 2.721470] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.730335] [] (bus_probe_device) from [] (deferred_probe_work_func+0xa8/0xcc) <4>[ 2.739555] r7:eb9c7300 r6:c0f24e58 r5:c0f24e1c r4:c1594c10 <4>[ 2.745486] [] (deferred_probe_work_func) from [] (process_one_work+0x194/0x274) <4>[ 2.754879] r7:eb9c7300 r6:c0e0d0d0 r5:c0f24e30 r4:c467bc80 <4>[ 2.760806] [] (process_one_work) from [] (worker_thread+0x220/0x2e4) <4>[ 2.769238] r10:c4681760 r9:c0f8fab0 r8:c0e0d0e4 r7:c0edca20 r6:c0e0d0d0 r5:c467bc94 <4>[ 2.777324] r4:c467bc80 <4>[ 2.780125] [] (worker_thread) from [] (kthread+0x11c/0x128) <4>[ 2.787787] r9:c1531e98 r8:c467bc80 r7:c013487c r6:c4692000 r5:c467ac80 r4:c4681740 <4>[ 2.795799] [] (kthread) from [] (ret_from_fork+0x14/0x2c) <4>[ 2.803282] Exception stack(0xc4693fb0 to 0xc4693ff8) <4>[ 2.808589] 3fa0: 00000000 00000000 00000000 00000000 <4>[ 2.817029] 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 <4>[ 2.825470] 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 <4>[ 2.832355] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0139324 <4>[ 2.840432] r4:c467ac80 r3:00000001 <4>[ 2.844272] ---[ end trace 58996bc4bee07164 ]--- <6>[ 2.849226] sdhost-bcm2835 3f202000.mmc: loaded - DMA enabled (>1) <4>[ 2.858305] dwc2 3f980000.usb: supply vusb_d not found, using dummy regulator <4>[ 2.865980] dwc2 3f980000.usb: supply vusb_a not found, using dummy regulator # <6>[ 2.924695] dwc2 3f980000.usb: DWC OTG Controller <6>[ 2.929697] dwc2 3f980000.usb: new USB bus registered, assigned bus number 1 <6>[ 2.937232] dwc2 3f980000.usb: irq 33, io mem 0x3f980000 <6>[ 2.944447] hub 1-0:1.0: USB hub found <6>[ 2.948606] hub 1-0:1.0: 1 port detected <4>[ 2.954563] vc4_hdmi 3f902000.hdmi: deferred probe timeout, ignoring dependency <4>[ 2.962245] vc4_hdmi: probe of 3f902000.hdmi failed with error -110 <4>[ 2.969129] vc4_vec 3f806000.vec: deferred probe timeout, ignoring dependency <4>[ 2.976616] vc4_vec: probe of 3f806000.vec failed with error -110 <4>[ 2.983339] vc4_v3d 3fc00000.v3d: deferred probe timeout, ignoring dependency <4>[ 2.990811] vc4_v3d: probe of 3fc00000.v3d failed with error -110 <4>[ 2.998162] OF: fdt: not creating '/sys/firmware/fdt': CRC check failed <4>[ 3.030260] mmc0: host does not support reading read-only switch, assuming write-enable <6>[ 3.040847] mmc0: new high speed SDHC card at address 0002 <6>[ 3.047684] mmcblk0: mmc0:0002 NCard 14.9 GiB <6>[ 3.055298] mmcblk0: p1 <6>[ 3.330632] usb 1-1: new high-speed USB device number 2 using dwc2 <6>[ 3.581682] hub 1-1:1.0: USB hub found <6>[ 3.585803] hub 1-1:1.0: 5 ports detected <6>[ 3.910609] usb 1-1.1: new high-speed USB device number 3 using dwc2 <6>[ 4.043927] smsc95xx v2.0.0 <6>[ 4.184227] SMSC LAN8700 usb-001:003:01: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=usb-001:003:01, irq=POLL) <6>[ 4.196766] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:d2:0e:1f <6>[ 4.300630] usb 1-1.3: new high-speed USB device number 4 using dwc2 <6>[ 4.437081] usb-storage 1-1.3:1.0: USB Mass Storage device detected <6>[ 4.444668] scsi host0: usb-storage 1-1.3:1.0 <6>[ 5.124773] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup <6>[ 5.142205] smsc95xx 1-1.1:1.0 eth0: Link is Down <5>[ 5.540178] scsi 0:0:0:0: Direct-Access Kingston DT 101 G2 PMAP PQ: 0 ANSI: 0 CCS <5>[ 5.839924] random: crng init done <5>[ 6.479601] sd 0:0:0:0: [sda] 7669824 512-byte logical blocks: (3.93 GB/3.66 GiB) <5>[ 6.487826] sd 0:0:0:0: [sda] Write Protect is off <3>[ 6.493318] sd 0:0:0:0: [sda] No Caching mode page found <3>[ 6.498901] sd 0:0:0:0: [sda] Assuming drive cache: write through <6>[ 6.538137] sda: sda1 sda2 <5>[ 6.545095] sd 0:0:0:0: [sda] Attached SCSI removable disk <6>[ 7.222235] smsc95xx 1-1.1:1.0 eth0: Link is Up - 100Mbps/Full - flow control off <6>[ 7.230682] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 7.260812] Sending DHCP requests ., OK <6>[ 7.544755] IP-Config: Got DHCP answer from 192.168.101.1, my address is 192.168.101.219 <6>[ 7.553136] IP-Config: Complete: <6>[ 7.556649] device=eth0, hwaddr=b8:27:eb:d2:0e:1f, ipaddr=192.168.101.219, mask=255.255.255.0, gw=192.168.101.1 <6>[ 7.567444] host=192.168.101.219, domain=lava.cbg.collabora.co.uk, nis-domain=(none) <6>[ 7.575900] bootserver=192.168.101.1, rootserver=192.168.101.1, rootpath= <6>[ 7.575907] nameserver0=192.168.101.1 <5>[ 7.588126] cfg80211: Loading compiled-in X.509 certificates for regulatory database <5>[ 7.617820] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' <4>[ 7.625100] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 <6>[ 7.634312] ALSA device list: <6>[ 7.637552] No soundcards found. <6>[ 7.641273] cfg80211: failed to load regulatory.db <6>[ 7.646768] uart-pl011 3f201000.serial: no DMA platform data <6>[ 7.659537] Freeing unused kernel memory: 1024K <6>[ 7.664710] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 7.894646] udevd[93]: starting version 3.2.9 <27>[ 7.913927] udevd[93]: specified user 'tss' unknown <27>[ 7.919403] udevd[93]: specified group 'tss' unknown <30>[ 7.930865] udevd[94]: starting eudev-3.2.9 <4>[ 8.285544] vchiq: module is from the staging directory, the quality is unknown, you have been warned. <6>[ 8.378533] bcm2835-rng 3f104000.rng: hwrng registered <3>[ 8.402445] bcm2835_vchiq 3f00b840.mailbox: failed to set channelbase <6>[ 8.409200] vchiq: could not load vchiq done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-6963036/environment . /lava-6963036/environment / # /lava-6963036/bin/lava-test-runner /lava-6963036/0 /lava-6963036/bin/lava-test-runner /lava-6963036/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-6963036/0/tests/0_dmesg + cat uuid + UUID=6963036_1.5.2<8>[ 9.721747] .4.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 9.786838] <8>[ 9.847079] <8>[ 9.907114] + set +x <8>[ 9.918214] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-6963036/environment / # . /lava-6963036/environment/lava-6963036/bin/lava-test-runner /lava-6963036/1 / # /lava-6963036/bin/lava-test-runner /lava-6963036/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-6963036/1/tests/1_bootrr + cat uuid + UUID=6963036_1.5.2<8>[ 10.442096] .4.5 + set +x + export 'PATH=/opt/bootrr/helpers:/lava-6963036/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr + sh helpers/bootrr-auto /lava-6963036/1/../bin/lava-test-case <8>[ 11.502967] /lava-6963036/1/../bin/lava-test-case <8>[ 11.557449] /lava-6963036/1/../bin/lava-test-case <8>[ 11.590213] + set +x <8>[ 11.615738] / #