connecting to NetworkSerialPort(target=Target(name='imx6ul-pico-hobbit-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4007, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4007 connected to 10.8.254.5 (port 4007) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2017.10.1-00009-gbc5d99d030 #1 Wed Nov 1 17:19:43 CET 2017 Board: Technexion Pico i.MX6UL Board detected i.MX6 UltraLite revision 1.0 mdio_bus: miibus0: probed imx-usb 2184200.usb: USB EHCI 1.00 imx-esdhc 2190000.usdhc: registered as 2190000.usdhc imx-esdhc 2194000.usdhc: registered as 2194000.usdhc netconsole: registered as netconsole-1 malloc space: 0x8fefca40 -> 0x9fdf947f (size 255 MiB) mmc0: detected MMC card version 5.1 mmc0: registered mmc0.boot0 mmc0: registered mmc0.boot1 mmc0: registered mmc0 running /env/bin/init... [?25h Hit m for menu or any other key to stop autoboot: 3 type exit to get to the menu [1;32mbarebox@[1;36mTechnexion Pico i.MX6UL Board:/[0m global linux.bootargs.console=\"console=ttymxc5,115200n8\" [1;32mbarebox@[1;36mTechnexion Pico i.MX6UL Board:/[0m global linux.bootargs.console=\"console=ttymxc5,115200n8\"global linux.bootargs.nfs=\"'root=/dev/nfs rw nfsroot=10.8.254.2:/var/lib/lava/dispatcher/tmp/797563/extract-nfsrootfs-jqthk_f6,v3,tcp ip=dhcp'\" [1;32mbarebox@[1;36mTechnexion Pico i.MX6UL Board:/[0m global linux.bootargs.nfs=\"'root=/dev/nfs rw nfsroot=10.8.254.2:/var/lib/lava/dispatcher/tmp/797563/extract-nfsrootfs-jqthk_f6,v3,tcp ip=dhcp'\"bootm -v -o /mnt/tftp/797563/tftp-deploy-bmgq5urd/dtb/imx6ul-pico-hobbit.dtb /mnt/tftp/797563/tftp-deploy-bmgq5urd/kernel/zImage [1;32mbarebox@[1;36mTechnexion Pico i.MX6UL Board:/[0m bootm -v -o /mnt/tftp/797563/tftp-deploy-bmgq5urd/dtb/imx6ul-pico-hobbit.dtb /mnt/tftp/797563/tftp-deploy-bmgq5urd/kernel/zImage warning: No MAC address set. Using random address 1a:44:51:b2:7a:22 eth1: 100Mbps full duplex link detected T DHCP client bound to address 10.8.254.251 Loading ARM Linux zImage '/mnt/tftp/797563/tftp-deploy-bmgq5urd/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x82e19000 no initrd load address, defaulting to 0x83852000 Loading devicetree from '/mnt/tftp/797563/tftp-deploy-bmgq5urd/dtb/imx6ul-pico-hobbit.dtb' mmc0: Cannot find nodepath /soc/aips-bus@02100000/usdhc@02190000, cannot fixup Failed to fixup node in of_partition_fixup+0x1/0x1f8: Invalid argument commandline: console=ttymxc5,115200n8 root=/dev/nfs rw nfsroot=10.8.254.2:/var/lib/lava/dispatcher/tmp/797563/extract-nfsrootfs-jqthk_f6,v3,tcp ip=dhcp Starting kernel at 0x82e19000, oftree at 0x83852000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.131-cip13 (KernelCI@build-j52281-arm-gcc-10-multi-v7-defconfig-tfpqk) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Tue Aug 16 23:07:48 UTC 2022 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TechNexion PICO-IMX6UL and HOBBIT baseboard [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x9b800000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x000000009fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fffffff] [ 0.000000] percpu: Embedded 20 pages/cpu s49868 r8192 d23860 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: console=ttymxc5,115200n8 root=/dev/nfs rw nfsroot=10.8.254.2:/var/lib/lava/dispatcher/tmp/797563/extract-nfsrootfs-jqthk_f6,v3,tcp ip=dhcp [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 428832K/524288K available (13312K kernel code, 2230K rwdata, 5340K rodata, 2048K init, 425K bss, 29920K reserved, 65536K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=1. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] Switching to timer-based delay loop, resolution 41ns [ 0.000017] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000062] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.007566] Console: colour dummy device 80x30 [ 0.007688] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.007734] pid_max: default: 32768 minimum: 301 [ 0.008099] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.008140] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.009617] CPU: Testing write buffer coherency: ok [ 0.010378] CPU0: update cpu_capacity 1024 [ 0.010420] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.012133] Setting up static identity map for 0x80300000 - 0x803000ac [ 0.014736] rcu: Hierarchical SRCU implementation. [ 0.020708] EFI services will not be available. [ 0.021172] smp: Bringing up secondary CPUs ... [ 0.021208] smp: Brought up 1 node, 1 CPU [ 0.021235] SMP: Total of 1 processors activated (48.00 BogoMIPS). [ 0.021253] CPU: All CPU(s) started in SVC mode. [ 0.022289] devtmpfs: initialized [ 0.035880] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.036435] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.036491] futex hash table entries: 256 (order: 2, 16384 bytes, linear) [ 0.041240] pinctrl core: initialized pinctrl subsystem [ 0.044920] DMI not present or invalid. [ 0.047008] NET: Registered protocol family 16 [ 0.051901] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.057316] thermal_sys: Registered thermal governor 'step_wise' [ 0.057513] cpuidle: using governor menu [ 0.266061] vdd3p0: supplied by regulator-dummy [ 0.278221] cpu: supplied by regulator-dummy [ 0.290838] vddsoc: supplied by regulator-dummy [ 0.679985] No ATAGs? [ 0.681062] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.681099] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.689894] imx6ul-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver [ 0.700508] Serial: AMBA PL011 UART driver [ 0.763914] mxs-dma 1804000.dma-apbh: initialized [ 0.778103] iommu: Default domain type: Translated [ 0.779061] vgaarb: loaded [ 0.781257] SCSI subsystem initialized [ 0.782540] usbcore: registered new interface driver usbfs [ 0.782682] usbcore: registered new interface driver hub [ 0.782800] usbcore: registered new device driver usb [ 0.786085] i2c i2c-0: IMX I2C adapter registered [ 0.788630] i2c i2c-1: IMX I2C adapter registered [ 0.789677] imx-i2c 21a8000.i2c: can't get pinctrl, bus recovery not supported [ 0.791530] i2c i2c-2: IMX I2C adapter registered [ 0.794590] pps_core: LinuxPPS API ver. 1 registered [ 0.794626] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.794687] PTP clock support registered [ 0.804599] clocksource: Switched to clocksource mxc_timer1 [ 3.027489] NET: Registered protocol family 2 [ 3.028072] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 3.029966] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 3.030062] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 3.030175] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 3.030334] TCP: Hash tables configured (established 4096 bind 4096) [ 3.030551] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 3.030623] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 3.031005] NET: Registered protocol family 1 [ 3.032764] RPC: Registered named UNIX socket transport module. [ 3.032810] RPC: Registered udp transport module. [ 3.032830] RPC: Registered tcp transport module. [ 3.032851] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 3.032883] PCI: CLS 0 bytes, default 64 [ 3.034832] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 3.038365] Initialise system trusted keyrings [ 3.039187] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 3.055380] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 3.057434] NFS: Registering the id_resolver key type [ 3.057579] Key type id_resolver registered [ 3.057605] Key type id_legacy registered [ 3.057890] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 3.057920] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 3.058009] ntfs: driver 2.1.32 [Flags: R/O]. [ 3.059198] Key type asymmetric registered [ 3.059235] Asymmetric key parser 'x509' registered [ 3.059364] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 3.059392] io scheduler mq-deadline registered [ 3.059414] io scheduler kyber registered [ 3.111750] pwm-backlight backlight: supply power not found, using dummy regulator [ 3.165091] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 3.165146] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 3.290133] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled [ 3.300377] SuperH (H)SCI(F) driver initialized [ 3.302871] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 69, base_baud = 5000000) is a IMX [ 3.305165] 21fc000.serial: ttymxc5 at MMIO 0x21fc000 (irq = 70, base_baud = 5000000) is a IMX [ 4.018450] printk: console [ttymxc5] enabled [ 4.026110] msm_serial: driver initialized [ 4.030812] STMicroelectronics ASC driver initialized [ 4.040056] STM32 USART driver initialized [ 4.066961] panel-simple panel: supply power not found, using dummy regulator [ 4.074639] panel-simple panel: Specify missing connector_type [ 4.106183] brd: module loaded [ 4.127212] loop: module loaded [ 4.166175] CAN device driver interface [ 4.172819] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 4.183800] pps pps0: new PPS source ptp0 [ 4.194786] fec 20b4000.ethernet eth0: registered PHC device 0 [ 4.204042] e1000e: Intel(R) PRO/1000 Network Driver [ 4.209176] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 4.215339] igb: Intel(R) Gigabit Ethernet Network Driver [ 4.220760] igb: Copyright (c) 2007-2014 Intel Corporation. [ 4.239719] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 4.247400] usbcore: registered new interface driver pegasus [ 4.253188] usbcore: registered new interface driver asix [ 4.258792] usbcore: registered new interface driver ax88179_178a [ 4.265054] usbcore: registered new interface driver cdc_ether [ 4.271034] usbcore: registered new interface driver smsc75xx [ 4.276981] usbcore: registered new interface driver smsc95xx [ 4.282829] usbcore: registered new interface driver net1080 [ 4.288641] usbcore: registered new interface driver cdc_subset [ 4.294710] usbcore: registered new interface driver zaurus [ 4.300505] usbcore: registered new interface driver cdc_ncm [ 4.314083] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.320760] ehci-pci: EHCI PCI platform driver [ 4.325402] ehci-platform: EHCI generic platform driver [ 4.331362] ehci-orion: EHCI orion driver [ 4.336015] SPEAr-ehci: EHCI SPEAr driver [ 4.340481] ehci-st: EHCI STMicroelectronics driver [ 4.345959] ehci-exynos: EHCI Exynos driver [ 4.350622] ehci-atmel: EHCI Atmel driver [ 4.355204] tegra-ehci: Tegra EHCI driver [ 4.359726] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.366072] ohci-pci: OHCI PCI platform driver [ 4.370711] ohci-platform: OHCI generic platform driver [ 4.376689] SPEAr-ohci: OHCI SPEAr driver [ 4.381160] ohci-st: OHCI STMicroelectronics driver [ 4.386618] ohci-atmel: OHCI Atmel driver [ 4.393116] usbcore: registered new interface driver usb-storage [ 4.418074] i2c /dev entries driver [ 4.469348] sdhci: Secure Digital Host Controller Interface driver [ 4.475690] sdhci: Copyright(c) Pierre Ossman [ 4.486495] Synopsys Designware Multimedia Card Interface Driver [ 4.497280] sdhci-pltfm: SDHCI platform and OF driver helper [ 4.522225] ledtrig-cpu: registered to indicate activity on CPUs [ 4.530942] usbcore: registered new interface driver usbhid [ 4.536703] usbhid: USB HID core driver [ 4.556816] NET: Registered protocol family 10 [ 4.563942] Segment Routing with IPv6 [ 4.567998] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 4.575551] NET: Registered protocol family 17 [ 4.580058] can: controller area network core [ 4.584710] NET: Registered protocol family 29 [ 4.589178] can: raw protocol [ 4.592171] can: broadcast manager protocol [ 4.596444] can: netlink gateway - max_hops=1 [ 4.601946] Key type dns_resolver registered [ 4.610499] ThumbEE CPU extension supported. [ 4.614990] Registering SWP/SWPB emulation handler [ 4.621007] Loading compiled-in X.509 certificates [ 4.661465] pwm-backlight backlight: supply power not found, using dummy regulator [ 4.669661] mmc0: SDHCI controller on 2190000.mmc [2190000.mmc] using ADMA [ 4.681405] panel-simple panel: supply power not found, using dummy regulator [ 4.689078] panel-simple panel: Specify missing connector_type [ 4.719025] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 4.724036] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 4.757764] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 4.768523] mmc1: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA [ 4.776898] hub 1-0:1.0: USB hub found [ 4.781057] hub 1-0:1.0: 1 port detected [ 4.792312] imx_thermal 20c8000.anatop:tempmon: Industrial CPU temperature grade - max:105C critical:100C passive:95C [ 4.807128] pwm-backlight backlight: supply power not found, using dummy regulator [ 4.819911] panel-simple panel: supply power not found, using dummy regulator [ 4.827583] panel-simple panel: Specify missing connector_type [ 4.837108] pwm-backlight backlight: supply power not found, using dummy regulator [ 4.849956] panel-simple panel: supply power not found, using dummy regulator [ 4.857634] panel-simple panel: Specify missing connector_type [ 4.877193] mmc0: new DDR MMC card at address 0001 [ 4.883474] mmcblk0: mmc0:0001 M62704 3.56 GiB [ 4.888891] mmcblk0boot0: mmc0:0001 M62704 partition 1 2.00 MiB [ 4.895665] mmcblk0boot1: mmc0:0001 M62704 partition 2 2.00 MiB [ 4.902173] mmcblk0rpmb: mmc0:0001 M62704 partition 3 512 KiB, chardev (235:0) [ 4.912273] mmcblk0: p1 p2 [ 4.923500] pwm-backlight backlight: supply power not found, using dummy regulator [ 4.931665] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 4.941808] panel-simple panel: supply power not found, using dummy regulator [ 4.949492] panel-simple panel: Specify missing connector_type [ 4.958995] Micrel KSZ8081 or KSZ8091 20b4000.ethernet-1:01: attached PHY driver [Micrel KSZ8081 or KSZ8091] (mii_bus:phy_addr=20b4000.ethernet-1:01, irq=205) [ 4.973394] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 4.991246] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 5.013273] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 5.204894] mmc1: new high speed SDIO card at address 0001 [ 7.428673] fec 20b4000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 7.436663] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 7.467536] Sending DHCP requests .., OK [ 10.271359] IP-Config: Got DHCP answer from 10.8.254.2, my address is 10.8.254.251 [ 10.279158] IP-Config: Complete: [ 10.282455] device=eth0, hwaddr=1a:44:51:b2:7a:22, ipaddr=10.8.254.251, mask=255.255.255.0, gw=255.255.255.255 [ 10.293015] host=10.8.254.251, domain=, nis-domain=(none) [ 10.298995] bootserver=10.8.254.2, rootserver=10.8.254.2, rootpath= [ 10.299023] nameserver0=10.8.254.2 [ 10.385289] VFS: Mounted root (nfs filesystem) on device 0:15. [ 10.395681] devtmpfs: mounted [ 10.405659] Freeing unused kernel memory: 2048K [ 10.427886] Run /sbin/init as init process [ 11.979824] systemd[1]: System time before build time, advancing clock. [ 12.289761] systemd[1]: systemd 247.3-7 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 12.314328] systemd[1]: Detected architecture arm. Welcome to [1mDebian GNU/Linux 11 (bullseye)[0m! [ 12.407585] systemd[1]: Set hostname to . [ 16.721506] systemd[1]: Queued start job for default target Graphical Interface. [ 16.732606] random: systemd: uninitialized urandom read (16 bytes read) [ 16.739954] systemd[1]: system-getty.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 16.752737] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 16.763435] systemd[1]: Created slice system-getty.slice. [[0;32m OK [0m] Created slice [0;1;39msystem-getty.slice[0m. [ 16.808140] random: systemd: uninitialized urandom read (16 bytes read) [ 16.818028] systemd[1]: Created slice system-modprobe.slice. [[0;32m OK [0m] Created slice [0;1;39msystem-modprobe.slice[0m. [ 16.868563] random: systemd: uninitialized urandom read (16 bytes read) [ 16.878568] systemd[1]: Created slice system-serial\x2dgetty.slice. [[0;32m OK [0m] Created slice [0;1;39msystem-serial\x2dgetty.slice[0m. [ 16.930808] systemd[1]: Created slice User and Session Slice. [[0;32m OK [0m] Created slice [0;1;39mUser and Session Slice[0m. [ 16.951611] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [[0;32m OK [0m] Started [0;1;39mDispatch Password …ts to Console Directory Watch[0m. [ 17.000066] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [[0;32m OK [0m] Started [0;1;39mForward Password R…uests to Wall Directory Watch[0m. [ 17.049482] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. [ 17.063328] systemd[1]: Reached target Local Encrypted Volumes. [[0;32m OK [0m] Reached target [0;1;39mLocal Encrypted Volumes[0m. [ 17.110415] systemd[1]: Reached target Paths. [[0;32m OK [0m] Reached target [0;1;39mPaths[0m. [ 17.148059] systemd[1]: Reached target Remote File Systems. [[0;32m OK [0m] Reached target [0;1;39mRemote File Systems[0m. [ 17.197976] systemd[1]: Reached target Slices. [[0;32m OK [0m] Reached target [0;1;39mSlices[0m. [ 17.238253] systemd[1]: Reached target Swap. [[0;32m OK [0m] Reached target [0;1;39mSwap[0m. [ 17.280620] systemd[1]: Listening on initctl Compatibility Named Pipe. [[0;32m OK [0m] Listening on [0;1;39minitctl Compatibility Named Pipe[0m. [ 17.510289] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. [ 17.529543] systemd[1]: Listening on Journal Socket (/dev/log). [[0;32m OK [0m] Listening on [0;1;39mJournal Socket (/dev/log)[0m. [ 17.582146] systemd[1]: Listening on Journal Socket. [[0;32m OK [0m] Listening on [0;1;39mJournal Socket[0m. [ 17.625642] systemd[1]: Listening on Network Service Netlink Socket. [[0;32m OK [0m] Listening on [0;1;39mNetwork Service Netlink Socket[0m. [ 17.688897] systemd[1]: Listening on udev Control Socket. [[0;32m OK [0m] Listening on [0;1;39mudev Control Socket[0m. [ 17.709623] systemd[1]: Listening on udev Kernel Socket. [[0;32m OK [0m] Listening on [0;1;39mudev Kernel Socket[0m. [ 17.728696] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 17.738966] systemd[1]: Condition check resulted in POSIX Message Queue File System being skipped. [ 17.750156] random: systemd: uninitialized urandom read (16 bytes read) [ 17.763071] systemd[1]: Mounting Kernel Debug File System... Mounting [0;1;39mKernel Debug File System[0m... [ 17.806541] random: systemd: uninitialized urandom read (16 bytes read) [ 17.828620] systemd[1]: Mounting Kernel Trace File System... Mounting [0;1;39mKernel Trace File System[0m... [ 17.891651] random: systemd: uninitialized urandom read (16 bytes read) [ 17.926739] systemd[1]: Starting Create list of static device nodes for the current kernel... Starting [0;1;39mCreate list of st…odes for the current kernel[0m... [ 18.056039] systemd[1]: Starting Load Kernel Module configfs... Starting [0;1;39mLoad Kernel Module configfs[0m... [ 18.097657] systemd[1]: Starting Load Kernel Module drm... Starting [0;1;39mLoad Kernel Module drm[0m... [ 18.148483] systemd[1]: Starting Load Kernel Module fuse... Starting [0;1;39mLoad Kernel Module fuse[0m... [ 18.237396] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 18.264348] systemd[1]: Starting Journal Service... Starting [0;1;39mJournal Service[0m... [ 18.337083] systemd[1]: Starting Load Kernel Modules... Starting [0;1;39mLoad Kernel Modules[0m... [ 18.382701] systemd[1]: Starting Remount Root and Kernel File Systems... Starting [0;1;39mRemount Root and Kernel File Systems[0m... [ 18.440843] systemd[1]: Starting Coldplug All udev Devices... Starting [0;1;39mColdplug All udev Devices[0m... [ 18.595140] systemd[1]: Mounted Kernel Debug File System. [[0;32m OK [0m] Mounted [0;1;39mKernel Debug File System[0m. [ 18.629212] systemd[1]: Mounted Kernel Trace File System. [[0;32m OK [0m] Mounted [0;1;39mKernel Trace File System[0m. [ 18.709166] systemd[1]: Finished Create list of static device nodes for the current kernel. [[0;32m OK [0m] Finished [0;1;39mCreate list of st… nodes for the current kernel[0m. [ 18.958591] systemd[1]: modprobe@configfs.service: Succeeded. [ 18.986568] systemd[1]: Finished Load Kernel Module configfs. [[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module configfs[0m. [ 19.022752] systemd[1]: modprobe@drm.service: Succeeded. [ 19.048138] random: systemd-journal: uninitialized urandom read (16 bytes read) [ 19.057386] systemd[1]: Finished Load Kernel Module drm. [[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module drm[0m. [ 19.098081] systemd[1]: modprobe@fuse.service: Succeeded. [ 19.125870] systemd[1]: Finished Load Kernel Module fuse. [[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module fuse[0m. [ 19.158124] systemd[1]: Finished Load Kernel Modules. [[0;32m OK [0m] Finished [0;1;39mLoad Kernel Modules[0m. [ 19.198063] systemd[1]: Finished Remount Root and Kernel File Systems. [[0;32m OK [0m] Finished [0;1;39mRemount Root and Kernel File Systems[0m. [ 19.257966] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 19.296296] random: systemd: uninitialized urandom read (16 bytes read) [ 19.327899] systemd[1]: Mounting Kernel Configuration File System... Mounting [0;1;39mKernel Configuration File System[0m... [ 19.399076] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 19.439063] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 19.476274] random: systemd: uninitialized urandom read (16 bytes read) [ 19.520277] systemd[1]: Starting Load/Save Random Seed... Starting [0;1;39mLoad/Save Random Seed[0m... [ 19.590392] systemd[1]: Starting Apply Kernel Variables... Starting [0;1;39mApply Kernel Variables[0m... [ 19.706211] systemd[1]: Starting Create System Users... Starting [0;1;39mCreate System Users[0m... [ 19.780359] systemd[1]: Mounted Kernel Configuration File System. [[0;32m OK [0m] Mounted [0;1;39mKernel Configuration File System[0m. [ 20.010249] systemd[1]: Started Journal Service. [[0;32m OK [0m] Started [0;1;39mJournal Service[0m. [ 20.066404] random: systemd: uninitialized urandom read (16 bytes read) Starting [0;1;39mFlush Journal to Persistent Storage[0m... [[0;32m OK [0m] Finished [0;1;39mApply Kernel Variables[0m. [[0;32m OK [0m] Finished [0;1;39mCreate System Users[0m. [ 20.637094] systemd-journald[88]: Received client request to flush runtime journal. Starting [0;1;39mCreate Static Device Nodes in /dev[0m... [[0;32m OK [0m] Finished [0;1;39mCreate Static Device Nodes in /dev[0m. [[0;32m OK [0m] Reached target [0;1;39mLocal File Systems (Pre)[0m. [[0;32m OK [0m] Reached target [0;1;39mLocal File Systems[0m. Starting [0;1;39mRule-based Manage…for Device Events and Files[0m... [[0;32m OK [0m] Finished [0;1;39mFlush Journal to Persistent Storage[0m. [ 22.944766] random: crng init done [ 22.948212] random: 42 urandom warning(s) missed due to ratelimiting Starting [0;1;39mCreate Volatile Files and Directories[0m... [[0;32m OK [0m] Finished [0;1;39mLoad/Save Random Seed[0m. [[0;32m OK [0m] Started [0;1;39mRule-based Manager for Device Events and Files[0m. Starting [0;1;39mNetwork Service[0m... [[0;32m OK [0m] Finished [0;1;39mCreate Volatile Files and Directories[0m. Starting [0;1;39mUpdate UTMP about System Boot/Shutdown[0m... [[0;32m OK [0m] Started [0;1;39mNetwork Service[0m. Starting [0;1;39mNetwork Name Resolution[0m... [[0;32m OK [0m] Finished [0;1;39mUpdate UTMP about System Boot/Shutdown[0m. [[0m[0;31m* [0m] (1 of 3) A start job is running for… All udev Devices (12s / no limit) M[K[[0;1;31m*[0m[0;31m* [0m] (1 of 3) A start job is running for… All udev Devices (12s / no limit) M[K[[0;31m*[0;1;31m*[0m[0;31m* [0m] (1 of 3) A start job is running for… All udev Devices (13s / no limit) M[K[[0;32m OK [0m] Started [0;1;39mNetwork Name Resolution[0m. [K[[0;32m OK [0m] Reached target [0;1;39mNetwork[0m. [[0;32m OK [0m] Reached target [0;1;39mHost and Network Name Lookups[0m. [ 31.933743] pwm-backlight backlight: supply power not found, using dummy regulator [ 32.095140] panel-simple panel: supply power not found, using dummy regulator [ 32.102734] panel-simple panel: Specify missing connector_type [[0;32m OK [0m] Finished [0;1;39mColdplug All udev Devices[0m. [[0;32m OK [0m] Reached target [0;1;39mSystem Initialization[0m. [ 32.758732] pwm-backlight backlight: supply power not found, using dummy regulator [[0;32m OK [0m] Started [0;1;39mDaily apt download activities[0m. [[0;32m OK [0m] Started [0;1;39mDaily apt upgrade and clean activities[0m. [ 32.850643] panel-simple panel: supply power not found, using dummy regulator [ 32.858325] panel-simple panel: Specify missing connector_type [[0;32m OK [0m] Started [0;1;39mPeriodic ext4 Onli…ata Check for All Filesystems[0m. [[0;32m OK [0m] Started [0;1;39mDiscard unused blocks once a week[0m. [[0;32m OK [0m] Started [0;1;39mDaily Cleanup of Temporary Directories[0m. [[0;32m OK [0m] Reached target [0;1;39mTimers[0m. [[0;32m OK [0m] Listening on [0;1;39mD-Bus System Message Bus Socket[0m. [[0;32m OK [0m] Reached target [0;1;39mSockets[0m. [[0;32m OK [0m] Reached target [0;1;39mBasic System[0m. [[0;32m OK [0m] Started [0;1;39mD-Bus System Message Bus[0m. [ 33.557698] caam 2140000.crypto: Entropy delay = 3200 [ 33.623583] caam 2140000.crypto: Instantiated RNG4 SH0 [ 33.684336] caam 2140000.crypto: Instantiated RNG4 SH1 [ 33.689535] caam 2140000.crypto: device ID = 0x0a16030000000000 (Era 8) [ 33.696199] caam 2140000.crypto: job rings = 3, qi = 0 [ 33.716158] pwm-backlight backlight: supply power not found, using dummy regulator [ 33.728733] panel-simple panel: supply power not found, using dummy regulator [ 33.736464] panel-simple panel: Specify missing connector_type Starting [0;1;39mRemove Stale Onli…t4 Metadata Check Snapshots[0m... Starting [0;1;39mUser Login Management[0m... Starting [0;1;39mPermit User Sessions[0m... [ 34.806462] sgtl5000 1-000a: sgtl5000 revision 0x11 [ 34.906804] sgtl5000 1-000a: Using internal LDO instead of VDDD: check ER1 erratum [ 35.135235] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 35.265535] pwm-backlight backlight: supply power not found, using dummy regulator [ 35.278137] panel-simple panel: supply power not found, using dummy regulator [ 35.285875] panel-simple panel: Specify missing connector_type [[0;32m OK [0m] Finished [0;1;39mPermit User Sessions[0m. [ 36.558716] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 36.567567] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 36.576429] cfg80211: failed to load regulatory.db [ 36.820383] pwm-backlight backlight: supply power not found, using dummy regulator [ 36.920425] panel-simple panel: supply power not found, using dummy regulator [ 36.928136] panel-simple panel: Specify missing connector_type [ 36.956092] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430a0-sdio for chip BCM43430/0 [ 37.092390] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430a0-sdio.bin failed with error -2 [ 37.176944] pwm-backlight backlight: supply power not found, using dummy regulator [ 37.282282] panel-simple panel: supply power not found, using dummy regulator [ 37.290068] panel-simple panel: Specify missing connector_type [ 38.205329] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50 [[0;32m OK [0m] Found device [0;1;39m/dev/ttymxc5[0m. [ [0;31m*[0;1;31m*[0m[0;31m* [0m] (2 of 2) A start job is running for…a Check Snapshots (24s / no limit) M[K[ [0;31m*[0;1;31m*[0m[0;31m* [0m] (2 of 2) A start job is running for…a Check Snapshots (24s / no limit) M[K[ [0;31m*[0;1;31m*[0m[0;31m*[0m] (2 of 2) A start job is running for…a Check Snapshots (24s / no limit) M[K[ [0;31m*[0;1;31m*[0m] (1 of 2) A start job is running for… Login Management (25s / 1min 47s) [ 42.405139] caam algorithms registered in /proc/crypto [ 42.443577] caam 2140000.crypto: caam pkc algorithms registered in /proc/crypto [ 42.451097] caam 2140000.crypto: registering rng-caam [ 42.492059] pwm-backlight backlight: supply power not found, using dummy regulator [ 42.521739] panel-simple panel: supply power not found, using dummy regulator [ 42.529516] panel-simple panel: Specify missing connector_type M[K[ [0;31m*[0m] (1 of 2) A start job is running for… Login Management (25s / 1min 47s) [ 42.636419] pwm-backlight backlight: supply power not found, using dummy regulator [ 42.670500] panel-simple panel: supply power not found, using dummy regulator [ 42.678269] panel-simple panel: Specify missing connector_type M[K[ [0;31m*[0;1;31m*[0m] (1 of 2) A start job is running for… Login Management (26s / 1min 47s) M[K[ [0;31m*[0;1;31m*[0m[0;31m*[0m] (2 of 2) A start job is running for…a Check Snapshots (26s / no limit) M[K[ [0;31m*[0;1;31m*[0m[0;31m* [0m] (2 of 2) A start job is running for…a Check Snapshots (26s / no limit) M[K[ [0;31m*[0;1;31m*[0m[0;31m* [0m] (2 of 2) A start job is running for…a Check Snapshots (27s / no limit) M[K[[0;31m*[0;1;31m*[0m[0;31m* [0m] (1 of 2) A start job is running for… Login Management (27s / 1min 47s) M[K[[0;1;31m*[0m[0;31m* [0m] (1 of 2) A start job is running for… Login Management (28s / 1min 47s) M[K[[0m[0;31m* [0m] (1 of 2) A start job is running for… Login Management (28s / 1min 47s) M[K[[0;1;31m*[0m[0;31m* [0m] (2 of 2) A start job is running for…a Check Snapshots (28s / no limit) M[K[[0;31m*[0;1;31m*[0m[0;31m* [0m] (2 of 2) A start job is running for…a Check Snapshots (29s / no limit) M[K[ [0;31m*[0;1;31m*[0m[0;31m* [0m] (2 of 2) A start job is running for…a Check Snapshots (29s / no limit) M[K[[0;32m OK [0m] Finished [0;1;39mRemove Stale Onli…ext4 Metadata Check Snapshots[0m. [K[[0;32m OK [0m] Started [0;1;39mUser Login Management[0m. [[0;32m OK [0m] Reached target [0;1;39mHardware activated USB gadget[0m. [[0;32m OK [0m] Listening on [0;1;39mLoad/Save RF …itch Status /dev/rfkill Watch[0m. [[0;32m OK [0m] Started [0;1;39mGetty on tty1[0m. [[0;32m OK [0m] Started [0;1;39mSerial Getty on ttymxc5[0m. [[0;32m OK [0m] Reached target [0;1;39mLogin Prompts[0m. [[0;32m OK [0m] Reached target [0;1;39mMulti-User System[0m. [[0;32m OK [0m] Reached target [0;1;39mGraphical Interface[0m. Starting [0;1;39mUpdate UTMP about System Runlevel Changes[0m... [[0;32m OK [0m] Finished [0;1;39mUpdate UTMP about System Runlevel Changes[0m. Debian GNU/Linux 11 debian-bullseye-armhf ttymxc5 debian-bullseye-armhf login: root (automatic login) Linux debian-bullseye-armhf 5.10.131-cip13 #1 SMP Tue Aug 16 23:07:48 UTC 2022 armv7l The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. / # / # export NFS_ROOTFS='/var/lib/lava/dispatcher/tmp/797563/extract-nfsrootfs-jqthk_f6' export NFS_ROOTFS='/var/lib/lava/dispatcher/tmp/797563/extract-nfsrootfs-jqthk_f6' / # export NFS_SERVER_IP='10.8.254.2' export NFS_SERVER_IP='10.8.254.2' / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-797563/environment . /lava-797563/environment / # /lava-797563/bin/lava-test-runner /lava-797563/0 /lava-797563/bin/lava-test-runner /lava-797563/0 + export TESTRUN_ID=0_dmesg + cd /lava-797563/0/tests/0_dmesg + cat uuid + UUID=797563_1.6.2.3.1[ 52.833120] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 53.533638] [ 54.059915] [ 54.584300] + set +x [ 54.595748] # / # #export SHELL=/bin/sh / # export SHELL=/bin/sh. /lava-797563/environment / # . /lava-797563/environment/lava-797563/bin/lava-test-runner /lava-797563/1 / # /lava-797563/bin/lava-test-runner /lava-797563/1 + export TESTRUN_ID=1_bootrr + cd /lava-797563/1/tests/1_bootrr + cat uuid + UUID=797563_1.6.2.3.5[ 56.154110] + set +x + export PATH=/opt/bootrr/helpers:/lava-797563/1/../bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin + cd /opt/bootrr + sh helpers/bootrr-auto /lava-797563/1/../bin/lava-test-case [ 57.827005] + set +x [ 58.213585] / #