Trying 127.0.0.1... Connected to 127.0.0.1. Escape character is '^]'. U-Boot SPL 2019.07 (Sep 19 2019 - 09:26:56 +0200) DRAM: 1024 MiB CPU: 912000000Hz, AXI/AHB/APB: 3/2/2 Trying to boot from MMC1 U-Boot 2019.07 (Sep 19 2019 - 09:26:56 +0200) Allwinner Technology CPU: Allwinner A20 (SUN7I) Model: Olimex A20-OLinuXino-LIME2 I2C: ready DRAM: 1 GiB MMC: mmc@1c0f000: 0 Loading Environment from FAT... *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Allwinner mUSB OTG (Peripheral) Net: eth0: ethernet@1c50000 Warning: usb_ether using MAC address from ROM , eth1: usb_ether starting USB... Bus usb@1c14000: USB EHCI 1.00 Bus usb@1c14400: USB OHCI 1.0 Bus usb@1c1c000: USB EHCI 1.00 Bus usb@1c1c400: USB OHCI 1.0 scanning bus usb@1c14000 for devices... 1 USB Device(s) found scanning bus usb@1c14400 for devices... 1 USB Device(s) found scanning bus usb@1c1c000 for devices... 1 USB Device(s) found scanning bus usb@1c1c400 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Hit any key to stop autoboot: 2  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp ethernet@1c50000 Waiting for PHY auto negotiation to complete.... done Speed: 100, full duplex BOOTP broadcast 1 DHCP client bound to address 10.201.3.157 (7 ms) => setenv serverip 10.201.1.5 setenv serverip 10.201.1.5 => tftp 0x40000000 2386639/tftp-deploy-rf8z_y3t/kernel/zImage tftp 0x40000000 2386639/tftp-deploy-rf8z_y3t/kernel/zImage Speed: 100, full duplex Using ethernet@1c50000 device TFTP from server 10.201.1.5; our IP address is 10.201.3.157 Filename '2386639/tftp-deploy-rf8z_y3t/kernel/zImage'. Load address: 0x40000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# #######################T T ########################################## ################################################################# ################################################################# ################################# 291 KiB/s done Bytes transferred = 4826152 (49a428 hex) => tftp 0x44300000 2386639/tftp-deploy-rf8z_y3t/ramdisk/ramdisk.cpio.gz.uboot tftp 0x44300000 2386639/tftp-deploy-rf8z_y3t/ramdisk/ramdisk.cpio.gz.uboot Speed: 100, full duplex Using ethernet@1c50000 device TFTP from server 10.201.1.5; our IP address is 10.201.3.157 Filename '2386639/tftp-deploy-rf8z_y3t/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x44300000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################################ 719.7 KiB/s done Bytes transferred = 7957391 (796b8f hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x44000000 2386639/tftp-deploy-rf8z_y3t/dtb/sun7i-a20-olinuxino-lime2.dtb tftp 0x44000000 2386639/tftp-deploy-rf8z_y3t/dtb/sun7i-a20-olinuxino-lime2.dtb Speed: 100, full duplex Using ethernet@1c50000 device TFTP from server 10.201.1.5; our IP address is 10.201.3.157 Filename '2386639/tftp-deploy-rf8z_y3t/dtb/sun7i-a20-olinuxino-lime2.dtb'. Load address: 0x44000000 Loading: *###### 583 KiB/s done Bytes transferred = 26290 (66b2 hex) => setenv bootargs 'console=ttyS0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' setenv bootargs 'console=ttyS0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' => bootz 0x40000000 0x44300000 0x44000000 bootz 0x40000000 0x44300000 0x44000000 ## Loading init Ramdisk from Legacy Image at 44300000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 7957327 Bytes = 7.6 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 44000000 Booting using the fdt blob at 0x44000000 EHCI failed to shut down host controller. Using Device Tree in place at 44000000, end 440096b1 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.131-cip13 (KernelCI@build-j56278-arm-gcc-10-sunxi-defconfig-8mfzh) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Wed Aug 17 10:39:55 UTC 2022 [ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Olimex A20-OLinuXino-LIME2 [ 0.000000] earlycon: uart0 at MMIO32 0x01c28000 (options '115200n8') [ 0.000000] printk: bootconsole [uart0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] Reserved memory: created CMA memory pool at 0x4a000000, size 96 MiB [ 0.000000] OF: reserved mem: initialized node default-pool, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000040000000-0x000000006fffffff] [ 0.000000] HighMem [mem 0x0000000070000000-0x000000007fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT [ 0.000000] percpu: Embedded 15 pages/cpu s31180 r8192 d22068 u61440 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260608 [ 0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 920640K/1048576K available (7168K kernel code, 904K rwdata, 1944K rodata, 1024K init, 272K bss, 29632K reserved, 98304K cma-reserved, 262144K highmem) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] GIC: Using split EOI/Deactivate mode <6>[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). <6>[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns <6>[ 0.000008] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns <6>[ 0.008264] Switching to timer-based delay loop, resolution 41ns <6>[ 0.014924] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns <6>[ 0.024610] clocksource: hstimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370868154 ns <6>[ 0.034492] Console: colour dummy device 80x30 <6>[ 0.039248] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) <6>[ 0.049877] pid_max: default: 32768 minimum: 301 <6>[ 0.054911] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.062505] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.071326] CPU: Testing write buffer coherency: ok <3>[ 0.076953] /cpus/cpu@0 missing clock-frequency property <3>[ 0.082541] /cpus/cpu@1 missing clock-frequency property <6>[ 0.088152] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 <6>[ 0.094854] Setting up static identity map for 0x40100000 - 0x40100060 <6>[ 0.101878] rcu: Hierarchical SRCU implementation. <6>[ 0.107607] smp: Bringing up secondary CPUs ... <6>[ 0.123374] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 <6>[ 0.123546] smp: Brought up 1 node, 2 CPUs <6>[ 0.133854] SMP: Total of 2 processors activated (96.00 BogoMIPS). <6>[ 0.140286] CPU: All CPU(s) started in HYP mode. <6>[ 0.145167] CPU: Virtualization extensions available. <6>[ 0.151293] devtmpfs: initialized <6>[ 0.161312] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4 <6>[ 0.169600] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.179759] futex hash table entries: 512 (order: 3, 32768 bytes, linear) <6>[ 0.190268] pinctrl core: initialized pinctrl subsystem <6>[ 0.197595] NET: Registered protocol family 16 <6>[ 0.203939] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.212265] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.212762] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. <6>[ 0.227303] hw-breakpoint: maximum watchpoint size is 8 bytes. <5>[ 0.258174] SCSI subsystem initialized <6>[ 0.262840] usbcore: registered new interface driver usbfs <6>[ 0.268680] usbcore: registered new interface driver hub <6>[ 0.274341] usbcore: registered new device driver usb <6>[ 0.279950] mc: Linux media interface: v0.10 <6>[ 0.284514] videodev: Linux video capture interface: v2.00 <6>[ 0.290429] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.295650] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.305067] PTP clock support registered <6>[ 0.309916] Advanced Linux Sound Architecture Driver Initialized. <6>[ 0.317369] clocksource: Switched to clocksource arch_sys_counter <6>[ 0.332469] NET: Registered protocol family 2 <6>[ 0.337521] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 0.346344] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) <6>[ 0.355019] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 0.363102] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 0.370620] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 0.377411] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 0.384339] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 0.391967] NET: Registered protocol family 1 <6>[ 0.397471] RPC: Registered named UNIX socket transport module. <6>[ 0.403663] RPC: Registered udp transport module. <6>[ 0.408644] RPC: Registered tcp transport module. <6>[ 0.413603] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.420613] Unpacking initramfs... <6>[ 1.008953] Freeing initrd memory: 7772K <4>[ 1.013555] hw perfevents: no interrupt-affinity property for /pmu, guessing. <6>[ 1.021296] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available <6>[ 1.031360] workingset: timestamp_bits=30 max_order=18 bucket_order=0 <5>[ 1.044837] NFS: Registering the id_resolver key type <5>[ 1.050327] Key type id_resolver registered <5>[ 1.054775] Key type id_legacy registered <6>[ 1.059184] bounce: pool size: 64 pages <6>[ 1.063336] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) <6>[ 1.071017] io scheduler mq-deadline registered <6>[ 1.075803] io scheduler kyber registered <3>[ 1.080922] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO <6>[ 1.090737] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver <6>[ 1.156404] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled <4>[ 1.165312] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator <6>[ 1.174967] printk: console [ttyS0] disabled <6>[ 1.199838] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 54, base_baud = 1500000) is a U6_16550A <6>[ 1.209153] printk: console [ttyS0] enabled <6>[ 1.209153] printk: console [ttyS0] enabled <6>[ 1.218047] printk: bootconsole [uart0] disabled <6>[ 1.218047] printk: bootconsole [uart0] disabled <6>[ 1.233226] sun4i-drm display-engine: bound 1e00000.display-frontend (ops 0xc084c248) <6>[ 1.241544] sun4i-drm display-engine: bound 1e20000.display-frontend (ops 0xc084c248) <6>[ 1.250050] sun4i-drm display-engine: bound 1e60000.display-backend (ops 0xc084b9e8) <3>[ 1.258107] sun4i-drm display-engine: attempt to add DMA range to existing map <6>[ 1.265897] sun4i-drm display-engine: bound 1e40000.display-backend (ops 0xc084b9e8) <6>[ 1.274484] sun4i-drm display-engine: No panel or bridge found... RGB output disabled <6>[ 1.282637] sun4i-drm display-engine: bound 1c0c000.lcd-controller (ops 0xc084a348) <6>[ 1.291054] sun4i-drm display-engine: No panel or bridge found... RGB output disabled <6>[ 1.299198] sun4i-drm display-engine: bound 1c0d000.lcd-controller (ops 0xc084a348) <6>[ 1.308335] sun4i-drm display-engine: bound 1c16000.hdmi (ops 0xc084c968) <6>[ 1.316313] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 0 <6>[ 1.324511] sun4i-drm display-engine: [drm] Cannot find any crtc or sizes <6>[ 1.336658] lima 1c40000.gpu: gp - mali400 version major 1 minor 1 <6>[ 1.343250] lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1 <6>[ 1.349872] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1 <6>[ 1.356448] lima 1c40000.gpu: l2 cache 64K, 4-way, 64byte cache line, 64bit external bus <6>[ 1.365483] lima 1c40000.gpu: bus rate = 300000000 <6>[ 1.370602] lima 1c40000.gpu: mod rate = 384000000 <6>[ 1.376162] [drm] Initialized lima 1.1.0 20191231 for 1c40000.gpu on minor 1 <4>[ 1.384490] ahci-sunxi 1c18000.sata: supply ahci not found, using dummy regulator <4>[ 1.392518] ahci-sunxi 1c18000.sata: supply phy not found, using dummy regulator <6>[ 1.402146] CAN device driver interface <6>[ 1.407074] sun7i-dwmac 1c50000.ethernet: IRQ eth_wake_irq not found <6>[ 1.413803] sun7i-dwmac 1c50000.ethernet: IRQ eth_lpi not found <6>[ 1.420133] sun7i-dwmac 1c50000.ethernet: PTP uses main clock <6>[ 1.426146] sun7i-dwmac 1c50000.ethernet: no reset control found <6>[ 1.432454] sun7i-dwmac 1c50000.ethernet: no regulator found <6>[ 1.438767] sun7i-dwmac 1c50000.ethernet: Version ID not available <6>[ 1.445218] sun7i-dwmac 1c50000.ethernet: DWMAC1000 <6>[ 1.450498] sun7i-dwmac 1c50000.ethernet: No HW DMA feature register supported <6>[ 1.458013] sun7i-dwmac 1c50000.ethernet: TX Checksum insertion supported <6>[ 1.465058] sun7i-dwmac 1c50000.ethernet: Normal descriptors <6>[ 1.470993] sun7i-dwmac 1c50000.ethernet: Ring mode enabled <6>[ 1.487257] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>[ 1.494119] ehci-platform: EHCI generic platform driver <6>[ 1.500336] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver <6>[ 1.506817] ohci-platform: OHCI generic platform driver <6>[ 1.514889] sunxi-rtc 1c20d00.rtc: registered as rtc0 <6>[ 1.520295] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01T00:00:41 UTC (41) <6>[ 1.528754] i2c /dev entries driver <6>[ 1.533962] axp20x-i2c 1-0034: AXP20x variant AXP209 found <6>[ 1.547299] input: axp20x-pek as /devices/platform/soc/1c2ac00.i2c/i2c-1/1-0034/axp20x-pek/input/input0 <6>[ 1.566569] vdd-rtc: supplied by regulator-dummy <6>[ 1.572296] avcc: supplied by regulator-dummy <6>[ 1.578972] vddio-csi0: supplied by regulator-dummy <6>[ 1.584215] vddio-csi1: Bringing 3300000uV into 2800000-2800000uV <6>[ 1.591152] vddio-csi1: supplied by regulator-dummy <6>[ 1.596965] ldo5: supplied by regulator-dummy <6>[ 1.602179] vdd-cpu: supplied by regulator-dummy <6>[ 1.607752] vdd-int-dll: supplied by regulator-dummy <6>[ 1.614578] axp20x-i2c 1-0034: AXP20X driver loaded <4>[ 1.622612] axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set <4>[ 1.631048] axp20x-ac-power-supply axp20x-ac-power-supply: DMA mask not set <6>[ 1.639308] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) <4>[ 1.649880] sun4i-pinctrl 1c20800.pinctrl: supply vcc-ph not found, using dummy regulator <6>[ 1.659402] sun4i-ss 1c15000.crypto-engine: Die ID 0 <6>[ 1.665127] sunxi-mmc 1c0f000.mmc: Got CD GPIO <6>[ 1.670032] usbcore: registered new interface driver usbhid <6>[ 1.675878] usbhid: USB HID core driver <6>[ 1.680800] cedrus 1c0e000.video-codec: Device registered as /dev/video0 <4>[ 1.688827] axp20x-adc axp20x-adc: DMA mask not set <6>[ 1.695837] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB <6>[ 1.706466] NET: Registered protocol family 17 <6>[ 1.711291] can: controller area network core <6>[ 1.716002] NET: Registered protocol family 29 <6>[ 1.720733] can: raw protocol <6>[ 1.723966] can: broadcast manager protocol <6>[ 1.728529] can: netlink gateway - max_hops=1 <5>[ 1.733449] Key type dns_resolver registered <5>[ 1.738110] Registering SWP/SWPB emulation handler <4>[ 1.739196] mmc0: host does not support reading read-only switch, assuming write-enable <6>[ 1.754634] mmc0: new high speed SDHC card at address 0007 <4>[ 1.760742] ahci-sunxi 1c18000.sata: supply ahci not found, using dummy regulator <6>[ 1.761601] mmcblk0: mmc0:0007 SD16G 14.5 GiB <4>[ 1.768907] ahci-sunxi 1c18000.sata: supply phy not found, using dummy regulator <6>[ 1.785465] mmcblk0: p1 <6>[ 1.877538] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP <4>[ 1.885327] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 <6>[ 1.891567] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode <6>[ 1.900837] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc <6>[ 1.911921] scsi host0: ahci-sunxi <6>[ 1.916007] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 44 <6>[ 1.925435] ehci-platform 1c14000.usb: EHCI Host Controller <6>[ 1.931368] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 <6>[ 1.939792] ehci-platform 1c14000.usb: irq 40, io mem 0x01c14000 <6>[ 1.967445] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 <6>[ 1.974824] hub 1-0:1.0: USB hub found <6>[ 1.979023] hub 1-0:1.0: 1 port detected <6>[ 1.984830] ehci-platform 1c1c000.usb: EHCI Host Controller <6>[ 1.990805] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 <6>[ 1.999346] ehci-platform 1c1c000.usb: irq 45, io mem 0x01c1c000 <6>[ 2.027412] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 <6>[ 2.034750] hub 2-0:1.0: USB hub found <6>[ 2.038927] hub 2-0:1.0: 1 port detected <6>[ 2.044683] ohci-platform 1c14400.usb: Generic Platform OHCI controller <6>[ 2.051692] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 <6>[ 2.060224] ohci-platform 1c14400.usb: irq 41, io mem 0x01c14400 <6>[ 2.132384] hub 3-0:1.0: USB hub found <6>[ 2.136463] hub 3-0:1.0: 1 port detected <6>[ 2.142378] ohci-platform 1c1c400.usb: Generic Platform OHCI controller <6>[ 2.149354] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 <6>[ 2.158076] ohci-platform 1c1c400.usb: irq 46, io mem 0x01c1c400 <6>[ 2.232575] hub 4-0:1.0: USB hub found <6>[ 2.236674] hub 4-0:1.0: 1 port detected <4>[ 2.242988] usb_phy_generic usb_phy_generic.0.auto: supply vcc not found, using dummy regulator <6>[ 2.250406] ata1: SATA link down (SStatus 0 SControl 300) <4>[ 2.252308] usb_phy_generic usb_phy_generic.0.auto: dummy supplies not allowed for exclusive requests <6>[ 2.269048] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver <6>[ 2.275091] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 5 <6>[ 2.284373] hub 5-0:1.0: USB hub found <6>[ 2.288557] hub 5-0:1.0: 1 port detected <6>[ 2.305501] sun7i-dwmac 1c50000.ethernet eth0: PHY [stmmac-0:01] driver [Generic PHY] (irq=POLL) <6>[ 2.316431] sun7i-dwmac 1c50000.ethernet eth0: No Safety Features support found <4>[ 2.324102] sun7i-dwmac 1c50000.ethernet eth0: RX IPC Checksum Offload disabled <6>[ 2.331704] sun7i-dwmac 1c50000.ethernet eth0: No MAC Management Counters available <4>[ 2.339653] sun7i-dwmac 1c50000.ethernet eth0: PTP not supported by HW <6>[ 2.347124] sun7i-dwmac 1c50000.ethernet eth0: configuring for phy/rgmii-id link mode <6>[ 4.458929] sun7i-dwmac 1c50000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx <5>[ 4.507583] Sending DHCP requests ., OK <6>[ 4.552092] IP-Config: Got DHCP answer from 10.201.1.3, my address is 10.201.3.157 <6>[ 4.560003] IP-Config: Complete: <6>[ 4.563510] device=eth0, hwaddr=02:0d:0a:82:c7:38, ipaddr=10.201.3.157, mask=255.255.0.0, gw=10.201.1.3 <6>[ 4.573693] host=10.201.3.157, domain=, nis-domain=(none) <6>[ 4.579960] bootserver=10.201.1.3, rootserver=10.201.1.3, rootpath= <6>[ 4.579994] nameserver0=10.1.1.1 <6>[ 4.592071] ALSA device list: <6>[ 4.595334] No soundcards found. <6>[ 4.604752] Freeing unused kernel memory: 1024K <6>[ 4.630338] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 4.890849] udevd[106]: starting version 3.2.9 <5>[ 4.896886] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 4.905211] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 4.912485] random: udevd: uninitialized urandom read (16 bytes read) <27>[ 4.928875] udevd[106]: specified user 'tss' unknown <27>[ 4.934413] udevd[106]: specified group 'tss' unknown <30>[ 4.943469] udevd[107]: starting eudev-3.2.9 done Saving random seed: <5>[ 5.924973] random: dd: uninitialized urandom read (32 bytes read) OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: <5>[ 6.043439] random: dropbear: uninitialized urandom read (32 bytes read) OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-2386639/environment . /lava-2386639/environment / # /lava-2386639/bin/lava-test-runner /lava-2386639/0 /lava-2386639/bin/lava-test-runner /lava-2386639/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-2386639/0/tests/0_dmesg + cat uuid + UUID=2386639_1.5.2.4.1 <8>[ 6.795871] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 6.851473] <8>[ 6.914177] <8>[ 7.025974] + set +x <8>[ 7.038258] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-2386639/environment / # . /lava-2386639/environment/lava-2386639/bin/lava-test-runner /lava-2386639/1 / # /lava-2386639/bin/lava-test-runner /lava-2386639/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-2386639/1/tests/1_bootrr + cat uuid + UUID=2386639_1.5.2.4.5<8>[ 7.608038] + set +x + export 'PATH=/opt/bootrr/helpers:/lava-2386639/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr + sh helpers/bootrr-auto /lava-2386639/1/../bin/lava-test-case <8>[ 8.671740] /lava-2386639/1/../bin/lava-test-case <8>[ 8.747082] /lava-2386639/1/../bin/lava-test-case <8>[ 8.781756] + set +x<8>[ 8.808672] / #