[Enter `^Ec?' for help] U-Boot 2016.03-rc1-00131-g39af3d8-dirty (Feb 09 2016 - 16:39:49 +0000) DRAM: 944 MiB WARNING: Caches not enabled RPI Model B+ (0x10) MMC: bcm2835_sdhci: 0 reading uboot.env In: serial Out: lcd Err: lcd Net: Net Initialization Skipped No ethernet found. starting USB... USB0: Core Release: 2.80a scanning bus 0 for devices... 4 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found Hit any key to stop autoboot: 2  0 U-Boot> usb start usb start U-Boot> setenv autoload no setenv autoload no U-Boot> setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff U-Boot> setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff U-Boot> dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.101.219 (361 ms) U-Boot> setenv serverip 192.168.101.1 setenv serverip 192.168.101.1 U-Boot> tftp 0x01000000 7147613/tftp-deploy-hq3j7pgk/kernel/zImage tftp 0x01000000 7147613/tftp-deploy-hq3j7pgk/kernel/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.101.1; our IP address is 192.168.101.219 Filename '7147613/tftp-deploy-hq3j7pgk/kernel/zImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ##### 528.3 KiB/s done Bytes transferred = 5790136 (5859b8 hex) U-Boot> tftp 0x02200000 7147613/tftp-deploy-hq3j7pgk/ramdisk/ramdisk.cpio.gz.uboot tftp 0x02200000 7147613/tftp-deploy-hq3j7pgk/ramdisk/ramdisk.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.101.1; our IP address is 192.168.101.219 Filename '7147613/tftp-deploy-hq3j7pgk/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x2200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################# 1005.9 KiB/s done Bytes transferred = 9241235 (8d0293 hex) U-Boot> setenv initrd_size ${filesize} setenv initrd_size ${filesize} U-Boot> tftp 0x00000100 7147613/tftp-deploy-hq3j7pgk/dtb/bcm2836-rpi-2-b.dtb tftp 0x00000100 7147613/tftp-deploy-hq3j7pgk/dtb/bcm2836-rpi-2-b.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.101.1; our IP address is 192.168.101.219 Filename '7147613/tftp-deploy-hq3j7pgk/dtb/bcm2836-rpi-2-b.dtb'. Load address: 0x100 Loading: *# 835 KiB/s done Bytes transferred = 13687 (3577 hex) U-Boot> setenv bootargs 'console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' setenv bootargs 'console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' U-Boot> bootz 0x01000000 0x02200000 0x00000100 bootz 0x01000000 0x02200000 0x00000100 Kernel image @ 0x1000000 [ 0x000000 - 0x5859b8 ] ## Loading init Ramdisk from Legacy Image at 02200000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 9241171 Bytes = 8.8 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 00000100 Booting using the fdt blob at 0x000100 reserving fdt memory region: addr=0 size=1000 Using Device Tree in place at 00000100, end 00006676 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.138-cip15 (KernelCI@build-j91168-arm-gcc-10-bcm2835-defconfig-p4fn5) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 Wed Aug 31 11:35:43 UTC 2022 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 2 Model B [ 0.000000] earlycon: pl11 at MMIO 0x3f201000 (options '115200n8') [ 0.000000] printk: bootconsole [pl11] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Ignoring RAM at 0x30000000-0x3b000000 [ 0.000000] Consider using a HIGHMEM enabled kernel. [ 0.000000] Reserved memory: created CMA memory pool at 0x2c000000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm/kernel/devtree.c:148 arm_dt_init_cpu_maps+0x1b8/0x200 [ 0.000000] DT /cpu 2 nodes greater than max cores 1, capping them [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.10.138-cip15 #1 [ 0.000000] Hardware name: BCM2835 [ 0.000000] Backtrace: [ 0.000000] [] (dump_backtrace) from [] (show_stack+0x20/0x24) [ 0.000000] r7:c0e01edc r6:00000000 r5:00000009 r4:c0bbbb1e [ 0.000000] [] (show_stack) from [] (dump_stack+0x28/0x30) [ 0.000000] [] (dump_stack) from [] (__warn+0xcc/0xf8) [ 0.000000] r5:00000009 r4:c0b32ca4 [ 0.000000] [] (__warn) from [] (warn_slowpath_fmt+0x88/0xcc) [ 0.000000] r9:c0f75408 r8:c0b32d1d r7:00000009 r6:c0d04d08 r5:00000094 r4:c0b32ca4 [ 0.000000] [] (warn_slowpath_fmt) from [] (arm_dt_init_cpu_maps+0x1b8/0x200) [ 0.000000] r8:c0b32c51 r7:00000000 r6:ff000000 r5:00000000 r4:eb9d96c4 [ 0.000000] [] (arm_dt_init_cpu_maps) from [] (setup_arch+0x26c/0x644) [ 0.000000] r10:c0e01f70 r9:c0e01f68 r8:ebffff00 r7:c0bc90c8 r6:2fffffff r5:c0e08730 [ 0.000000] r4:c0d33f10 [ 0.000000] [] (setup_arch) from [] (start_kernel+0x64/0x520) [ 0.000000] r10:10c53c7d r9:410fc075 r8:00000100 r7:c0f8f03c r6:c0e04240 r5:00000051 [ 0.000000] r4:c0d004b0 [ 0.000000] [] (start_kernel) from [<00000000>] (0x0) [ 0.000000] r9:410fc075 r8:00000100 r7:00000000 r6:10c03c7d r5:00000051 r4:c0d004b0 [ 0.000000] ---[ end trace 58996bc4bee07162 ]--- [ 0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 195072 [ 0.000000] Kernel co# mmand line: console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 689080K/786432K available (8192K kernel code, 1593K rwdata, 3240K rodata, 1024K init, 711K bss, 31816K reserved, 65536K cma-reserved) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 <6>[ 0.000000] ftrace: allocating 32613 entries in 96 pages <6>[ 0.000000] ftrace: allocated 96 pages with 2 groups <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <3>[ 0.000000] [Firmware Bug]: Bootloader left irq enabled: bank 1 irq 9 <6>[ 0.000018] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns <6>[ 0.008817] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns <6>[ 0.018637] bcm2835: system timer (irq = 27) <6>[ 0.023777] arch_timer: cp15 timer(s) running at 19.20MHz (virt). <6>[ 0.030267] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns <6>[ 0.041535] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns <6>[ 0.049962] Switching to timer-based delay loop, resolution 52ns <6>[ 0.056757] Console: colour dummy device 80x30 <6>[ 0.061617] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) <6>[ 0.072460] pid_max: default: 32768 minimum: 301 <6>[ 0.077811] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.085562] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.094761] CPU: Testing write buffer coherency: ok <6>[ 0.101112] Setting up static identity map for 0x100000 - 0x100054 <6>[ 0.109352] devtmpfs: initialized <6>[ 0.118783] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 <6>[ 0.127192] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.137521] futex hash table entries: 256 (order: -1, 3072 bytes, linear) <6>[ 0.147940] pinctrl core: initialized pinctrl subsystem <6>[ 0.155532] NET: Registered protocol family 16 <6>[ 0.162443] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.173076] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.173547] No ATAGs? <6>[ 0.182570] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. <6>[ 0.190992] hw-breakpoint: maximum watchpoint size is 8 bytes. <6>[ 0.197532] Serial: AMBA PL011 UART driver <6>[ 0.222456] Kprobes globally optimized <5>[ 0.231798] SCSI subsystem initialized <6>[ 0.236212] usbcore: registered new interface driver usbfs <6>[ 0.242203] usbcore: registered new interface driver hub <6>[ 0.247937] usbcore: registered new device driver usb <4>[ 0.253612] usb_phy_generic phy: supply vcc not found, using dummy regulator <4>[ 0.261252] usb_phy_generic phy: dummy supplies not allowed for exclusive requests <6>[ 0.269516] mc: Linux media interface: v0.10 <6>[ 0.274185] videodev: Linux video capture interface: v2.00 <6>[ 0.280328] Advanced Linux Sound Architecture Driver Initialized. <6>[ 0.287556] Bluetooth: Core ver 2.22 <6>[ 0.291564] NET: Registered protocol family 31 <6>[ 0.296361] Bluetooth: HCI device and connection manager initialized <6>[ 0.303127] Bluetooth: HCI socket layer initialized <6>[ 0.308369] Bluetooth: L2CAP socket layer initialized <6>[ 0.313809] Bluetooth: SCO socket layer initialized <6>[ 0.319608] clocksource: Switched to clocksource arch_sys_counter <6>[ 0.566275] simple-framebuffer 3b006000.framebuffer: framebuffer at 0x3b006000, 0x85400 bytes, mapped to 0x(ptrval) <6>[ 0.577278] simple-framebuffer 3b006000.framebuffer: format=r5g6b5, mode=656x416x16, linelength=1312 <6>[ 0.590703] Console: switching to colour frame buffer device 82x26 <6>[ 0.600295] simple-framebuffer 3b006000.framebuffer: fb0: simplefb registered! <6>[ 0.617797] NET: Registered protocol family 2 <6>[ 0.623073] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 0.632472] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) <6>[ 0.641359] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 0.649611] TCP bind hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 0.657236] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 0.664221] UDP hash table entries: 512 (order: 1, 8192 bytes, linear) <6>[ 0.671188] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes, linear) <6>[ 0.678751] NET: Registered protocol family 1 <6>[ 0.684244] RPC: Registered named UNIX socket transport module. <6>[ 0.690585] RPC: Registered udp transport module. <6>[ 0.695645] RPC: Registered tcp transport module. <6>[ 0.700711] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.709469] Unpacking initramfs... <6>[ 1.500766] Freeing initrd memory: 9028K <6>[ 1.506138] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available <5>[ 1.516256] Initialise system trusted keyrings <6>[ 1.521474] workingset: timestamp_bits=30 max_order=18 bucket_order=0 <6>[ 1.538634] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). <5>[ 1.663669] Key type asymmetric registered <5>[ 1.668121] Asymmetric key parser 'x509' registered <6>[ 1.673607] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) <6>[ 1.681440] io scheduler mq-deadline registered <6>[ 1.686322] io scheduler kyber registered <6>[ 1.699067] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled <6>[ 1.711334] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver <6>[ 1.722631] usbcore: registered new interface driver zd1211rw <6>[ 1.728832] usbcore: registered new interface driver lan78xx <6>[ 1.735019] usbcore: registered new interface driver asix <6>[ 1.740866] usbcore: registered new interface driver ax88179_178a <6>[ 1.747388] usbcore: registered new interface driver cdc_ether <6>[ 1.753695] usbcore: registered new interface driver smsc95xx <6>[ 1.759876] usbcore: registered new interface driver net1080 <6>[ 1.765949] usbcore: registered new interface driver cdc_subset <6>[ 1.772314] usbcore: registered new interface driver zaurus <6>[ 1.778349] usbcore: registered new interface driver cdc_ncm <6>[ 1.785088] usbcore: registered new interface driver usb-storage <6>[ 1.791691] i2c /dev entries driver <4>[ 1.797970] i2c-bcm2835 3f805000.i2c: Could not read clock-frequency property <6>[ 1.807622] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer <6>[ 1.814826] sdhci: Secure Digital Host Controller Interface driver <6>[ 1.821419] sdhci: Copyright(c) Pierre Ossman <6>[ 1.826394] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 1.833840] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 1.840821] usbcore: registered new interface driver usbhid <6>[ 1.846773] usbhid: USB HID core driver <6>[ 1.851138] bcm2835-mbox 3f00b880.mailbox: mailbox enabled <6>[ 1.859090] NET: Registered protocol family 10 <6>[ 1.865297] Segment Routing with IPv6 <6>[ 1.869414] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 1.876693] NET: Registered protocol family 17 <6>[ 1.882083] oprofile: using timer interrupt. <5>[ 1.887072] Loading compiled-in X.509 certificates <6>[ 1.898681] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 81, base_baud = 0) is a PL011 rev2 <6>[ 1.908211] printk: console [ttyAMA0] enabled <6>[ 1.908211] printk: console [ttyAMA0] enabled <6>[ 1.917583] printk: bootconsole [pl11] disabled <6>[ 1.917583] printk: bootconsole [pl11] disabled <6>[ 1.931286] raspberrypi-firmware soc:firmware: Attached to firmware from 2014-12-19T18:44:06 <4>[ 1.942684] ------------[ cut here ]------------ <4>[ 1.947594] WARNING: CPU: 0 PID: 46 at drivers/cpufreq/cpufreq-dt.c:79 dt_cpufreq_probe+0xf8/0x2f0 <4>[ 1.956858] Modules linked in: <4>[ 1.960199] CPU: 0 PID: 46 Comm: kworker/0:3 Tainted: G W 5.10.138-cip15 #1 <4>[ 1.968708] Hardware name: BCM2835 <4>[ 1.972394] Workqueue: events deferred_probe_work_func <4>[ 1.977786] Backtrace: <4>[ 1.980523] [] (dump_backtrace) from [] (show_stack+0x20/0x24) <4>[ 1.988346] r7:00000000 r6:00000000 r5:00000009 r4:c0bbbb1e <4>[ 1.994278] [] (show_stack) from [] (dump_stack+0x28/0x30) <4>[ 2.001777] [] (dump_stack) from [] (__warn+0xcc/0xf8) <4>[ 2.008902] r5:00000009 r4:c0ba46b5 <4>[ 2.012753] [] (__warn) from [] (warn_slowpath_fmt+0x88/0xcc) <4>[ 2.020501] r9:c46e6bc8 r8:00000000 r7:00000009 r6:c0628ee4 r5:0000004f r4:c0ba46b5 <4>[ 2.028500] [] (warn_slowpath_fmt) from [] (dt_cpufreq_probe+0xf8/0x2f0) <4>[ 2.037200] r8:00000000 r7:c46e7a10 r6:c46e6bc0 r5:c0e08860 r4:00000000 <4>[ 2.044172] [] (dt_cpufreq_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.052886] r10:00000003 r9:c1031744 r8:00000000 r7:c103173c r6:c0f35814 r5:c46e7a10 <4>[ 2.060978] r4:00000000 <4>[ 2.063778] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.072305] r7:c103173c r6:c0f35814 r5:00000000 r4:c46e7a10 <4>[ 2.078224] [] (really_probe) from [] (driver_probe_device+0x19c/0x1c8) <4>[ 2.086839] r10:00000003 r9:00000000 r8:c0f24f38 r7:c46e7a10 r6:c46c77fc r5:c0f35814 <4>[ 2.094926] r4:c46e7a10 <4>[ 2.097725] [] (driver_probe_device) from [] (__device_attach_driver+0xa0/0xf4) <4>[ 2.107033] r9:00000000 r8:c0f24f38 r7:c46e7a10 r6:c46c77fc r5:c0f35814 r4:00000001 <4>[ 2.115046] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.124092] r7:c46e7a54 r6:c05189e8 r5:c46c77fc r4:00000000 <4>[ 2.130021] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.138534] r6:c46e7a10 r5:00000001 r4:c46e7a10 <4>[ 2.143423] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.152209] r7:00000000 r6:c46e7a10 r5:c0f24ee0 r4:c46e7a10 <4>[ 2.158127] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.167019] [] (bus_probe_device) from [] (device_add+0x5d4/0x6f8) <4>[ 2.175204] r7:00000000 r6:c0f24bd8 r5:00000000 r4:c46e7a10 <4>[ 2.181135] [] (device_add) from [] (platform_device_add+0x190/0x1f8) <4>[ 2.189566] r9:c0e0b378 r8:c0e0b358 r7:05f5e100 r6:00000000 r5:00000000 r4:c46e7a00 <4>[ 2.197577] [] (platform_device_add) from [] (platform_device_register_full+0xf0/0x124) <4>[ 2.207579] r9:05f5e0ff r8:2faf0800 r7:05f5e100 r6:c46c78e0 r5:00000000 r4:c46e7a00 <4>[ 2.215590] [] (platform_device_register_full) from [] (raspberrypi_cpufreq_probe+0x10c/0x198) <4>[ 2.226196] r7:05f5e100 r6:c0e08860 r5:00000000 r4:00000000 <4>[ 2.232127] [] (raspberrypi_cpufreq_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.241613] r9:c1031744 r8:00000000 r7:c103173c r6:c0f3590c r5:c46e7610 r4:00000000 <4>[ 2.249624] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.258139] r7:c103173c r6:c0f3590c r5:00000000 r4:c46e7610 <4>[ 2.264071] [] (really_probe) from [] (driver_probe_device+0x19c/0x1c8) <4>[ 2.272687] r10:c46e6340 r9:00000000 r8:c46e7410 r7:c46e7610 r6:c46c7a2c r5:c0f3590c <4>[ 2.280778] r4:c46e7610 <4>[ 2.283577] [] (driver_probe_device) from [] (__device_attach_driver+0xa0/0xf4) <4>[ 2.292896] r9:00000000 r8:c46e7410 r7:c46e7610 r6:c46c7a2c r5:c0f3590c r4:00000001 <4>[ 2.300906] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.309952] r7:c46e7654 r6:c05189e8 r5:c46c7a2c r4:00000000 <4>[ 2.315870] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.324393] r6:c46e7610 r5:00000001 r4:c46e7610 <4>[ 2.329273] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.338058] r7:00000000 r6:c46e7610 r5:c0f24ee0 r4:c46e7610 <4>[ 2.343986] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.352862] [] (bus_probe_device) from [] (device_add+0x5d4/0x6f8) <4>[ 2.361041] r7:00000000 r6:c0f24bd8 r5:00000000 r4:c46e7610 <4>[ 2.366959] [] (device_add) from [] (platform_device_add+0x190/0x1f8) <4>[ 2.375400] r9:c0e0b378 r8:c0e0b358 r7:00000000 r6:00000000 r5:00000000 r4:c46e7600 <4>[ 2.383411] [] (platform_device_add) from [] (platform_device_register_full+0xf0/0x124) <4>[ 2.393418] r9:c46e7410 r8:c46e1150 r7:00000000 r6:c46c7b18 r5:00000000 r4:c46e7600 <4>[ 2.401434] [] (platform_device_register_full) from [] (raspberrypi_clk_probe+0x160/0x31c) <4>[ 2.411692] r7:00000000 r6:00000000 r5:c46e62c0 r4:00000000 <4>[ 2.417612] [] (raspberrypi_clk_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.426747] r10:00000003 r9:c1031744 r8:00000000 r7:c103173c r6:c0f1f0dc r5:c46e7410 <4>[ 2.434832] r4:00000000 <4>[ 2.437631] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.446156] r7:c103173c r6:c0f1f0dc r5:00000000 r4:c46e7410 <4>[ 2.452086] [] (really_probe) from [] (driver_probe_device+0x19c/0x1c8) <4>[ 2.460701] r10:00000003 r9:00000000 r8:c1594c10 r7:c46e7410 r6:c46c7c6c r5:c0f1f0dc <4>[ 2.468777] r4:c46e7410 <4>[ 2.471590] [] (driver_probe_device) from [] (__device_attach_driver+0xa0/0xf4) <4>[ 2.480899] r9:00000000 r8:c1594c10 r7:c46e7410 r6:c46c7c6c r5:c0f1f0dc r4:00000001 <4>[ 2.488898] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.497944] r7:c46e7454 r6:c05189e8 r5:c46c7c6c r4:00000000 <4>[ 2.503877] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.512402] r6:c46e7410 r5:00000001 r4:c46e7410 <4>[ 2.517281] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.526066] r7:00000000 r6:c46e7410 r5:c0f24ee0 r4:c46e7410 <4>[ 2.531995] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.540871] [] (bus_probe_device) from [] (device_add+0x5d4/0x6f8) <4>[ 2.549038] r7:00000000 r6:c0f24bd8 r5:00000000 r4:c46e7410 <4>[ 2.554968] [] (device_add) from [] (platform_device_add+0x190/0x1f8) <4>[ 2.563409] r9:c0e0b378 r8:c0e0b358 r7:c1594c00 r6:00000000 r5:00000000 r4:c46e7400 <4>[ 2.571421] [] (platform_device_add) from [] (platform_device_register_full+0xf0/0x124) <4>[ 2.581422] r9:c1031744 r8:00000001 r7:c1594c00 r6:c46c7d58 r5:00000000 r4:c46e7400 <4>[ 2.589425] [] (platform_device_register_full) from [] (rpi_firmware_probe+0x19c/0x1e4) <4>[ 2.599424] r7:c1594c00 r6:c1594c10 r5:c46e52c0 r4:00000000 <4>[ 2.605354] [] (rpi_firmware_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.614231] r8:00000000 r7:c103173c r6:c0f3722c r5:c1594c10 r4:00000000 <4>[ 2.621202] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.629729] r7:c103173c r6:c0f3722c r5:00000000 r4:c1594c10 <4>[ 2.635648] [] (really_probe) from [] (driver_probe_device+0x19c/0x1c8) <4>[ 2.644263] r10:c0f24e34 r9:00000000 r8:00000000 r7:c1594c10 r6:c46c7ea4 r5:c0f3722c <4>[ 2.652349] r4:c1594c10 <4>[ 2.655147] [] (driver_probe_device) from [] (__device_attach_driver+0xa0/0xf4) <4>[ 2.664455] r9:00000000 r8:00000000 r7:c1594c10 r6:c46c7ea4 r5:c0f3722c r4:00000001 <4>[ 2.672464] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.681512] r7:c1594c54 r6:c05189e8 r5:c46c7ea4 r4:00000000 <4>[ 2.687431] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.695955] r6:c1594c10 r5:00000001 r4:c1594c10 <4>[ 2.700843] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.709629] r7:eb9c7300 r6:c1594c10 r5:c0f24ee0 r4:c1594c10 <4>[ 2.715547] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.724428] [] (bus_probe_device) from [] (deferred_probe_work_func+0xa8/0xcc) <4>[ 2.733648] r7:eb9c7300 r6:c0f24e58 r5:c0f24e1c r4:c1594c10 <4>[ 2.739569] [] (deferred_probe_work_func) from [] (process_one_work+0x194/0x274) <4>[ 2.748960] r7:eb9c7300 r6:c0e0d0d0 r5:c0f24e30 r4:c46b0c80 <4>[ 2.754888] [] (process_one_work) from [] (worker_thread+0x220/0x2e4) <4>[ 2.763330] r10:c159f720 r9:c0f8fab0 r8:c0e0d0e4 r7:c0edca20 r6:c0e0d0d0 r5:c46b0c94 <4>[ 2.771416] r4:c46b0c80 <4>[ 2.774218] [] (worker_thread) from [] (kthread+0x11c/0x128) <4>[ 2.781879] r9:c1531e98 r8:c46b0c80 r7:c0134970 r6:c46c6000 r5:c159f100 r4:c159f700 <4>[ 2.789891] [] (kthread) from [] (ret_from_fork+0x14/0x2c) <4>[ 2.797362] Exception stack(0xc46c7fb0 to 0xc46c7ff8) <4>[ 2.802679] 7fa0: 00000000 00000000 00000000 00000000 <4>[ 2.811119] 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 <4>[ 2.819546] 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 <4>[ 2.826430] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0139418 <4>[ 2.834522] r4:c159f100 r3:00000001 <4>[ 2.838353] ---[ end trace 58996bc4bee07164 ]--- <6>[ 2.843273] sdhost-bcm2835 3f202000.mmc: loaded - DMA enabled (>1) <4>[ 2.852306] dwc2 3f980000.usb: supply vusb_d not found, using dummy regulator <4>[ 2.859957] dwc2 3f980000.usb: supply vusb_a not found, using dummy regulator # <6>[ 2.918392] dwc2 3f980000.usb: DWC OTG Controller <6>[ 2.923428] dwc2 3f980000.usb: new USB bus registered, assigned bus number 1 <6>[ 2.930954] dwc2 3f980000.usb: irq 33, io mem 0x3f980000 <6>[ 2.937668] hub 1-0:1.0: USB hub found <6>[ 2.941803] hub 1-0:1.0: 1 port detected <4>[ 2.947807] vc4_hdmi 3f902000.hdmi: deferred probe timeout, ignoring dependency <4>[ 2.955485] vc4_hdmi: probe of 3f902000.hdmi failed with error -110 <4>[ 2.962374] vc4_vec 3f806000.vec: deferred probe timeout, ignoring dependency <4>[ 2.969840] vc4_vec: probe of 3f806000.vec failed with error -110 <4>[ 2.976423] vc4_v3d 3fc00000.v3d: deferred probe timeout, ignoring dependency <4>[ 2.983890] vc4_v3d: probe of 3fc00000.v3d failed with error -110 <4>[ 2.991243] OF: fdt: not creating '/sys/firmware/fdt': CRC check failed <4>[ 3.023190] mmc0: host does not support reading read-only switch, assuming write-enable <6>[ 3.033772] mmc0: new high speed SDHC card at address 0002 <6>[ 3.040628] mmcblk0: mmc0:0002 NCard 14.9 GiB <6>[ 3.048048] mmcblk0: p1 <6>[ 3.319646] usb 1-1: new high-speed USB device number 2 using dwc2 <6>[ 3.570689] hub 1-1:1.0: USB hub found <6>[ 3.574811] hub 1-1:1.0: 5 ports detected <6>[ 3.899626] usb 1-1.1: new high-speed USB device number 3 using dwc2 <6>[ 4.032946] smsc95xx v2.0.0 <6>[ 4.183237] SMSC LAN8700 usb-001:003:01: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=usb-001:003:01, irq=POLL) <6>[ 4.195790] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:d2:0e:1f <6>[ 4.299650] usb 1-1.3: new high-speed USB device number 4 using dwc2 <6>[ 4.435852] usb-storage 1-1.3:1.0: USB Mass Storage device detected <6>[ 4.443409] scsi host0: usb-storage 1-1.3:1.0 <6>[ 5.123913] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup <6>[ 5.141220] smsc95xx 1-1.1:1.0 eth0: Link is Down <5>[ 5.539187] scsi 0:0:0:0: Direct-Access Kingston DT 101 G2 PMAP PQ: 0 ANSI: 0 CCS <5>[ 5.827809] random: crng init done <5>[ 6.478988] sd 0:0:0:0: [sda] 7669824 512-byte logical blocks: (3.93 GB/3.66 GiB) <5>[ 6.487208] sd 0:0:0:0: [sda] Write Protect is off <3>[ 6.492707] sd 0:0:0:0: [sda] No Caching mode page found <3>[ 6.498289] sd 0:0:0:0: [sda] Assuming drive cache: write through <6>[ 6.537389] sda: sda1 sda2 <5>[ 6.544225] sd 0:0:0:0: [sda] Attached SCSI removable disk <6>[ 7.221250] smsc95xx 1-1.1:1.0 eth0: Link is Up - 100Mbps/Full - flow control off <6>[ 7.229785] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 7.259837] Sending DHCP requests ., OK <6>[ 7.563730] IP-Config: Got DHCP answer from 192.168.101.1, my address is 192.168.101.219 <6>[ 7.572111] IP-Config: Complete: <6>[ 7.575620] device=eth0, hwaddr=b8:27:eb:d2:0e:1f, ipaddr=192.168.101.219, mask=255.255.255.0, gw=192.168.101.1 <6>[ 7.586428] host=192.168.101.219, domain=lava.cbg.collabora.co.uk, nis-domain=(none) <6>[ 7.594897] bootserver=192.168.101.1, rootserver=192.168.101.1, rootpath= <6>[ 7.594905] nameserver0=192.168.101.1 <5>[ 7.607137] cfg80211: Loading compiled-in X.509 certificates for regulatory database <5>[ 7.636825] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' <4>[ 7.644126] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 <6>[ 7.653360] ALSA device list: <6>[ 7.656602] No soundcards found. <6>[ 7.660316] cfg80211: failed to load regulatory.db <6>[ 7.665807] uart-pl011 3f201000.serial: no DMA platform data <6>[ 7.678562] Freeing unused kernel memory: 1024K <6>[ 7.683732] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 7.916163] udevd[93]: starting version 3.2.9 <27>[ 7.935416] udevd[93]: specified user 'tss' unknown <27>[ 7.941041] udevd[93]: specified group 'tss' unknown <30>[ 7.952454] udevd[94]: starting eudev-3.2.9 <4>[ 8.305123] vchiq: module is from the staging directory, the quality is unknown, you have been warned. <6>[ 8.397122] bcm2835-rng 3f104000.rng: hwrng registered <3>[ 8.420046] bcm2835_vchiq 3f00b840.mailbox: failed to set channelbase <6>[ 8.426782] vchiq: could not load vchiq done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-7147613/environment . /lava-7147613/environment / # /lava-7147613/bin/lava-test-runner /lava-7147613/0 /lava-7147613/bin/lava-test-runner /lava-7147613/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-7147613/0/tests/0_dmesg + cat uuid + UUID=7147613_1.5.2<8>[ 9.768861] .4.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 9.834387] <8>[ 9.894755] <8>[ 9.954876] + set +x <8>[ 9.965923] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-7147613/environment / # . /lava-7147613/environment/lava-7147613/bin/lava-test-runner /lava-7147613/1 / # /lava-7147613/bin/lava-test-runner /lava-7147613/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-7147613/1/tests/1_bootrr + cat uuid + UUID=7147613_1.5.2<8>[ 10.493040] .4.5 + set +x + export 'PATH=/opt/bootrr/helpers:/lava-7147613/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr + sh helpers/bootrr-auto /lava-7147613/1/../bin/lava-test-case <8>[ 11.554120] /lava-7147613/1/../bin/lava-test-case <8>[ 11.609045] /lava-7147613/1/../bin/lava-test-case <8>[ 11.642060] + set +x <8>[ 11.667206] / #