connecting to NetworkSerialPort(target=Target(name='imx6dl-riotboard-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4011, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4011 connected to 10.8.254.5 (port 4011) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2017.10.1-00009-gbc5d99d030 #1 Wed Nov 1 16:14:48 CET 2017 Board: RIoTboard i.MX6S detected i.MX6 Solo revision 1.1 mdio_bus: miibus0: probed imx-usb 2184200.usb: USB EHCI 1.00 imx-esdhc 2194000.usdhc: registered as 2194000.usdhc imx-esdhc 2198000.usdhc: registered as 2198000.usdhc imx-esdhc 219c000.usdhc: registered as 219c000.usdhc imx-ipuv3 2400000.ipu: IPUv3H probed imx-hdmi 120000.hdmi: Detected HDMI controller 0x13:0x1a:0xa0:0xc1 netconsole: registered as netconsole-1 malloc space: 0x2fefb4e0 -> 0x4fdf69bf (size 511 MiB) mmc3: detected MMC card version 4.41 mmc3: registered mmc3.boot0 mmc3: registered mmc3.boot1 mmc3: registered mmc3 running /env/bin/init... [?25h Hit m for menu or any other key to stop autoboot: 3 type exit to get to the menu [1;32mbarebox@[1;36mRIoTboard i.MX6S:/[0m bootm -v -r /mnt/tftp/823020/tftp-deploy-8gk9wcuf/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/823020/tftp-deploy-8gk9wcuf/dtb/imx6dl-riotboard.dtb /mnt/tftp/823020/tftp-deploy-8gk9wcuf/kernel/zImage [1;32mbarebox@[1;36mRIoTboard i.MX6S:/[0m bootm -v -r /mnt/tftp/823020/tftp-deploy-8gk9wcuf/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/823020/tftp-deploy-8gk9wcuf/dtb/imx6dl-riotboard.dtb /mnt/tftp/823020/tftp-deploy-8gk9wcuf/kernel/zImage warning: No MAC address set. Using random address c6:bf:48:23:d5:bb eth0: 1000Mbps full duplex link detected T DHCP client bound to address 10.8.254.98 Loading ARM Linux zImage '/mnt/tftp/823020/tftp-deploy-8gk9wcuf/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x1322f000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/823020/tftp-deploy-8gk9wcuf/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x189b4185 Loading devicetree from '/mnt/tftp/823020/tftp-deploy-8gk9wcuf/dtb/imx6dl-riotboard.dtb' mmc3: Cannot find nodepath /soc/aips-bus@02100000/usdhc@0219c000, cannot fixup Failed to fixup node in of_partition_fixup+0x1/0x1f8: Invalid argument commandline: console=ttymxc1,115200n8 Starting kernel at 0x1322f000, initrd at 0x18000000, oftree at 0x189b5000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.153-cip19 (KernelCI@build-j483387-arm-gcc-10-imx-v6-v7-defconfig-kxxsz) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Wed Nov 9 20:50:47 UTC 2022 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: RIoTboard i.MX6S [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 64 MiB at 0x4a000000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000010000000-0x000000003fffffff] [ 0.000000] HighMem [mem 0x0000000040000000-0x000000004fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000010000000-0x000000004fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000004fffffff] [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] percpu: Embedded 20 pages/cpu s51948 r8192 d21780 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260608 [ 0.000000] Kernel command line: console=ttymxc1,115200n8 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 932744K/1048576K available (14336K kernel code, 2023K rwdata, 4844K rodata, 1024K init, 6660K bss, 50296K reserved, 65536K cma-reserved, 195688K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Running RCU self tests [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU lockdep checking is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 512 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76450001 [ 0.000000] ccm: ldb_di0_sel already changed from reset value: 0 [ 0.000000] ccm: ldb_di1_sel already changed from reset value: 0 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000008] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000041] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.001826] Console: colour dummy device 80x30 [ 0.001877] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001903] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001926] ... MAX_LOCK_DEPTH: 48 [ 0.001948] ... MAX_LOCKDEP_KEYS: 8192 [ 0.001968] ... CLASSHASH_SIZE: 4096 [ 0.001989] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.002008] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.002030] ... CHAINHASH_SIZE: 32768 [ 0.002052] memory used by lock dependency info: 4061 kB [ 0.002072] memory used for stack traces: 2112 kB [ 0.002094] per task-struct memory footprint: 1536 bytes [ 0.002216] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.002262] pid_max: default: 32768 minimum: 301 [ 0.002654] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.002702] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.006304] CPU: Testing write buffer coherency: ok [ 0.006444] CPU0: Spectre v2: using BPIALL workaround [ 0.007401] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.010578] Setting up static identity map for 0x10100000 - 0x10100078 [ 0.011348] rcu: Hierarchical SRCU implementation. [ 0.013386] smp: Bringing up secondary CPUs ... [ 0.013428] smp: Brought up 1 node, 1 CPU [ 0.013460] SMP: Total of 1 processors activated (6.00 BogoMIPS). [ 0.013489] CPU: All CPU(s) started in SVC mode. [ 0.016222] devtmpfs: initialized [ 0.055866] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.057176] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.057258] futex hash table entries: 256 (order: 2, 16384 bytes, linear) [ 0.060178] pinctrl core: initialized pinctrl subsystem [ 0.066831] NET: Registered protocol family 16 [ 0.097340] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.103509] thermal_sys: Registered thermal governor 'step_wise' [ 0.103841] cpuidle: using governor menu [ 0.104006] CPU identified as i.MX6DL, silicon rev 1.1 [ 0.598808] vdd1p1: supplied by regulator-dummy [ 0.621943] vdd3p0: supplied by regulator-dummy [ 0.644648] vdd2p5: supplied by regulator-dummy [ 0.667343] vddarm: supplied by regulator-dummy [ 0.690618] vddpu: supplied by regulator-dummy [ 0.712481] vddsoc: supplied by regulator-dummy [ 1.538962] No ATAGs? [ 1.539344] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 1.539444] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 1.545950] imx6dl-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver [ 1.678549] vgaarb: loaded [ 1.681054] SCSI subsystem initialized [ 1.682957] usbcore: registered new interface driver usbfs [ 1.683253] usbcore: registered new interface driver hub [ 1.683427] usbcore: registered new device driver usb [ 1.683886] usb_phy_generic usbphynop1: supply vcc not found, using dummy regulator [ 1.684797] usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests [ 1.685314] usb_phy_generic usbphynop2: supply vcc not found, using dummy regulator [ 1.686071] usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests [ 1.693226] i2c i2c-0: IMX I2C adapter registered [ 1.697981] i2c i2c-1: IMX I2C adapter registered [ 1.701635] i2c i2c-3: IMX I2C adapter registered [ 1.702277] mc: Linux media interface: v0.10 [ 1.702445] videodev: Linux video capture interface: v2.00 [ 1.703128] pps_core: LinuxPPS API ver. 1 registered [ 1.703166] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.703263] PTP clock support registered [ 1.705263] Advanced Linux Sound Architecture Driver Initialized. [ 1.713733] Bluetooth: Core ver 2.22 [ 1.713908] NET: Registered protocol family 31 [ 1.713942] Bluetooth: HCI device and connection manager initialized [ 1.714095] Bluetooth: HCI socket layer initialized [ 1.714150] Bluetooth: L2CAP socket layer initialized [ 1.714343] Bluetooth: SCO socket layer initialized [ 1.717281] clocksource: Switched to clocksource mxc_timer1 [ 3.165290] VFS: Disk quotas dquot_6.6.0 [ 3.165503] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 3.201751] NET: Registered protocol family 2 [ 3.202449] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 3.205795] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 22528 bytes, linear) [ 3.205962] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 3.206145] TCP bind hash table entries: 8192 (order: 6, 327680 bytes, linear) [ 3.207433] TCP: Hash tables configured (established 8192 bind 8192) [ 3.208096] UDP hash table entries: 512 (order: 3, 49152 bytes, linear) [ 3.208320] UDP-Lite hash table entries: 512 (order: 3, 49152 bytes, linear) [ 3.208966] NET: Registered protocol family 1 [ 3.212311] RPC: Registered named UNIX socket transport module. [ 3.212425] RPC: Registered udp transport module. [ 3.212461] RPC: Registered tcp transport module. [ 3.212493] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 3.214375] PCI: CLS 0 bytes, default 64 [ 3.216098] Trying to unpack rootfs image as initramfs... [ 4.467547] Freeing initrd memory: 9940K [ 4.470224] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 4.476490] Initialise system trusted keyrings [ 4.477654] workingset: timestamp_bits=30 max_order=18 bucket_order=0 [ 4.505964] NFS: Registering the id_resolver key type [ 4.506177] Key type id_resolver registered [ 4.506299] Key type id_legacy registered [ 4.506718] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 4.506844] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 4.507071] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 4.509412] fuse: init (API version 7.32) [ 4.601638] Key type asymmetric registered [ 4.601832] Asymmetric key parser 'x509' registered [ 4.602207] bounce: pool size: 64 pages [ 4.602364] io scheduler mq-deadline registered [ 4.602404] io scheduler kyber registered [ 4.634449] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 4.634573] imx-sdma 20ec000.sdma: Falling back to sysfs fallback for: imx/sdma/sdma-imx6q.bin [ 4.641753] mxs-dma 110000.dma-apbh: initialized [ 4.655911] pfuze100-regulator 0-0008: Full layer: 1, Metal layer: 1 [ 4.656900] pfuze100-regulator 0-0008: FAB: 0, FIN: 0 [ 4.656941] pfuze100-regulator 0-0008: pfuze100 found. [ 4.692895] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 32, base_baud = 5000000) is a IMX [ 4.698898] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 75, base_baud = 5000000) is a IMX [ 5.601337] printk: console [ttymxc1] enabled [ 5.609420] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 76, base_baud = 5000000) is a IMX [ 5.622467] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 77, base_baud = 5000000) is a IMX [ 5.634965] 21f4000.serial: ttymxc4 at MMIO 0x21f4000 (irq = 78, base_baud = 5000000) is a IMX [ 5.681902] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops) [ 5.688727] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops) [ 5.694349] etnaviv-gpu 130000.gpu: model: GC880, revision: 5106 [ 5.701392] etnaviv-gpu 134000.gpu: model: GC320, revision: 5007 [ 5.711079] [drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor 0 [ 5.730195] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_crtc_ops) [ 5.738300] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_crtc_ops) [ 5.747076] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.31a with HDCP (DWC HDMI 3D TX PHY) [ 5.764420] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops) [ 5.775207] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1 [ 5.785137] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 5.793480] imx-ipuv3 2400000.ipu: IPUv3H probed [ 5.839201] brd: module loaded [ 5.884046] loop: module loaded [ 5.903126] CAN device driver interface [ 5.913242] pps pps0: new PPS source ptp0 [ 5.988034] fec 2188000.ethernet eth0: registered PHC device 0 [ 5.998285] usbcore: registered new interface driver r8152 [ 6.003948] usbcore: registered new interface driver lan78xx [ 6.009999] usbcore: registered new interface driver asix [ 6.015576] usbcore: registered new interface driver ax88179_178a [ 6.021922] usbcore: registered new interface driver cdc_ether [ 6.028031] usbcore: registered new interface driver smsc95xx [ 6.033931] usbcore: registered new interface driver net1080 [ 6.039811] usbcore: registered new interface driver cdc_subset [ 6.045877] usbcore: registered new interface driver zaurus [ 6.051689] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 6.059416] usbcore: registered new interface driver cdc_ncm [ 6.065108] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 6.071729] ehci-pci: EHCI PCI platform driver [ 6.076337] ehci-mxc: Freescale On-Chip EHCI Host driver [ 6.082986] usbcore: registered new interface driver usb-storage [ 6.112417] snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc0 [ 6.118876] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01T00:00:00 UTC (0) [ 6.128483] i2c /dev entries driver [ 6.148761] Bluetooth: HCI UART driver ver 2.3 [ 6.153247] Bluetooth: HCI UART protocol H4 registered [ 6.158590] Bluetooth: HCI UART protocol LL registered [ 6.167674] sdhci: Secure Digital Host Controller Interface driver [ 6.173885] sdhci: Copyright(c) Pierre Ossman [ 6.178339] sdhci-pltfm: SDHCI platform and OF driver helper [ 6.188074] sdhci-esdhc-imx 2194000.mmc: Got CD GPIO [ 6.193308] sdhci-esdhc-imx 2194000.mmc: Got WP GPIO [ 6.204866] sdhci-esdhc-imx 2198000.mmc: Got CD GPIO [ 6.218337] sdhci-esdhc-imx 2198000.mmc: Got WP GPIO [ 6.226543] caam 2100000.crypto: Entropy delay = 3200 [ 6.292525] caam 2100000.crypto: Instantiated RNG4 SH0 [ 6.353280] caam 2100000.crypto: Instantiated RNG4 SH1 [ 6.361868] caam 2100000.crypto: device ID = 0x0a16010000000100 (Era 4) [ 6.368656] caam 2100000.crypto: job rings = 2, qi = 0 [ 6.387426] mmc3: SDHCI controller on 219c000.mmc [219c000.mmc] using ADMA [ 6.399558] mmc1: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA [ 6.407792] mmc2: SDHCI controller on 2198000.mmc [2198000.mmc] using ADMA [ 6.444399] caam algorithms registered in /proc/crypto [ 6.458539] caam 2100000.crypto: registering rng-caam [ 6.470419] usbcore: registered new interface driver usbhid [ 6.476028] usbhid: USB HID core driver [ 6.486252] ipu1_csi0: Registered ipu1_csi0 capture as /dev/video0 [ 6.494896] ipu1_ic_prpenc: Registered ipu1_ic_prpenc capture as /dev/video1 [ 6.504202] ipu1_ic_prpvf: Registered ipu1_ic_prpvf capture as /dev/video2 [ 6.513420] ipu1_csi1: Registered ipu1_csi1 capture as /dev/video3 [ 6.521634] mmc3: new DDR MMC card at address 0001 [ 6.541384] mmcblk3: mmc3:0001 MMC04G 3.58 GiB [ 6.546975] mmcblk3boot0: mmc3:0001 MMC04G partition 1 2.00 MiB [ 6.563431] mmcblk3boot1: mmc3:0001 MMC04G partition 2 2.00 MiB [ 6.572368] sgtl5000 0-000a: sgtl5000 revision 0x11 [ 6.577821] mmcblk3rpmb: mmc3:0001 MMC04G partition 3 128 KiB, chardev (243:0) [ 6.593366] sgtl5000 0-000a: Using internal LDO instead of VDDD: check ER1 erratum [ 6.647001] random: crng init done [ 6.668887] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 6.733903] NET: Registered protocol family 10 [ 6.743519] Segment Routing with IPv6 [ 6.747533] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 6.756224] NET: Registered protocol family 17 [ 6.760840] can: controller area network core [ 6.765505] NET: Registered protocol family 29 [ 6.770114] can: raw protocol [ 6.773354] can: broadcast manager protocol [ 6.777787] can: netlink gateway - max_hops=1 [ 6.782791] Key type dns_resolver registered [ 6.799346] Registering SWP/SWPB emulation handler [ 6.804854] Loading compiled-in X.509 certificates [ 6.975118] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 6.980654] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 7.017569] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 7.026873] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 7.035753] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.043191] usb usb1: Product: EHCI Host Controller [ 7.048321] usb usb1: Manufacturer: Linux 5.10.153-cip19 ehci_hcd [ 7.054498] usb usb1: SerialNumber: ci_hdrc.1 [ 7.069904] hub 1-0:1.0: USB hub found [ 7.074572] hub 1-0:1.0: 1 port detected [ 7.118299] imx-media: Registered ipu_ic_pp csc/scaler as /dev/video4 [ 7.135333] imx_thermal 20c8000.anatop:tempmon: Commercial CPU temperature grade - max:95C critical:90C passive:85C [ 7.155980] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 7.214150] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 7.223175] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 7.232001] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db [ 7.240039] ALSA device list: [ 7.243040] #0: imx6-riotboard-sgtl5000 [ 7.251441] Freeing unused kernel memory: 1024K [ 7.269497] Run /init as init process [ 7.407502] usb 1-1: new high-speed USB device number 2 using ci_hdrc Starting syslogd: OK Starting klogd: OK Running sysctl: [ 7.619570] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.00 [ 7.628022] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 7.635246] usb 1-1: Product: USB 2.0 Hub [MTT] OK [ 7.698888] hub 1-1:1.0: USB hub found [ 7.703087] hub 1-1:1.0: 4 ports detected Populating /dev using udev: [ 7.738114] udevd[180]: starting version 3.2.9 [ 7.758367] udevd[180]: specified user 'tss' unknown [ 7.763584] udevd[180]: specified group 'tss' unknown [ 7.789687] udevd[181]: starting eudev-3.2.9 [ 9.492022] coda 2040000.vpu: Direct firmware load for vpu_fw_imx6d.bin failed with error -2 [ 9.500695] coda 2040000.vpu: Falling back to sysfs fallback for: vpu_fw_imx6d.bin done Saving random seed: OK Starting network: OK Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-823020/environment . /lava-823020/environment / # /lava-823020/bin/lava-test-runner /lava-823020/0 /lava-823020/bin/lava-test-runner /lava-823020/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-823020/0/tests/0_dmesg + cat uuid + UUID=823020_1.5.2.3.1[ 11.817823] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 11.924199] [ 12.018931] [ 12.113720] + set +x [ 12.125052] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-823020/environment / # . /lava-823020/environment/lava-823020/bin/lava-test-runner /lava-823020/1 / # /lava-823020/bin/lava-test-runner /lava-823020/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-823020/1/tests/1_bootrr + cat uuid + UUID=823020_1.5.2.3.5[ 12.723207] + set +x + export 'PATH=/opt/bootrr/helpers:/lava-823020/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr + sh helpers/bootrr-auto /lava-823020/1/../bin/lava-test-case [ 13.853027] /lava-823020/1/../bin/lava-test-case [ 13.944316] /lava-823020/1/../bin/lava-test-case [ 13.994404] + set +x [ 14.032490] / #