connecting to NetworkSerialPort(target=Target(name='imx6dl-riotboard-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4011, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4011 connected to 10.8.254.5 (port 4011) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2017.10.1-00009-gbc5d99d030 #1 Wed Nov 1 16:14:48 CET 2017 Board: RIoTboard i.MX6S detected i.MX6 Solo revision 1.1 mdio_bus: miibus0: probed imx-usb 2184200.usb: USB EHCI 1.00 imx-esdhc 2194000.usdhc: registered as 2194000.usdhc imx-esdhc 2198000.usdhc: registered as 2198000.usdhc imx-esdhc 219c000.usdhc: registered as 219c000.usdhc imx-ipuv3 2400000.ipu: IPUv3H probed imx-hdmi 120000.hdmi: Detected HDMI controller 0x13:0x1a:0xa0:0xc1 netconsole: registered as netconsole-1 malloc space: 0x2fefb4e0 -> 0x4fdf69bf (size 511 MiB) mmc3: detected MMC card version 4.41 mmc3: registered mmc3.boot0 mmc3: registered mmc3.boot1 mmc3: registered mmc3 running /env/bin/init... [?25h Hit m for menu or any other key to stop autoboot: 3 type exit to get to the menu [1;32mbarebox@[1;36mRIoTboard i.MX6S:/[0m bootm -v -r /mnt/tftp/821734/tftp-deploy-5xr1w1iw/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/821734/tftp-deploy-5xr1w1iw/dtb/imx6dl-riotboard.dtb /mnt/tftp/821734/tftp-deploy-5xr1w1iw/kernel/zImage [1;32mbarebox@[1;36mRIoTboard i.MX6S:/[0m bootm -v -r /mnt/tftp/821734/tftp-deploy-5xr1w1iw/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/821734/tftp-deploy-5xr1w1iw/dtb/imx6dl-riotboard.dtb /mnt/tftp/821734/tftp-deploy-5xr1w1iw/kernel/zImage warning: No MAC address set. Using random address 82:ed:f3:24:7a:47 eth0: 1000Mbps full duplex link detected T DHCP client bound to address 10.8.254.248 Loading ARM Linux zImage '/mnt/tftp/821734/tftp-deploy-5xr1w1iw/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x1322f000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/821734/tftp-deploy-5xr1w1iw/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x189b4130 Loading devicetree from '/mnt/tftp/821734/tftp-deploy-5xr1w1iw/dtb/imx6dl-riotboard.dtb' mmc3: Cannot find nodepath /soc/aips-bus@02100000/usdhc@0219c000, cannot fixup Failed to fixup node in of_partition_fixup+0x1/0x1f8: Invalid argument commandline: console=ttymxc1,115200n8 Starting kernel at 0x1322f000, initrd at 0x18000000, oftree at 0x189b5000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.153-cip19 (KernelCI@build-j479003-arm-gcc-10-imx-v6-v7-defconfig-45ktt) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Wed Nov 9 10:15:25 UTC 2022 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: RIoTboard i.MX6S [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 64 MiB at 0x4a000000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000010000000-0x000000003fffffff] [ 0.000000] HighMem [mem 0x0000000040000000-0x000000004fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000010000000-0x000000004fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000004fffffff] [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] percpu: Embedded 20 pages/cpu s51948 r8192 d21780 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260608 [ 0.000000] Kernel command line: console=ttymxc1,115200n8 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 932744K/1048576K available (14336K kernel code, 2023K rwdata, 4844K rodata, 1024K init, 6660K bss, 50296K reserved, 65536K cma-reserved, 195688K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Running RCU self tests [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU lockdep checking is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 512 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76450001 [ 0.000000] ccm: ldb_di0_sel already changed from reset value: 0 [ 0.000000] ccm: ldb_di1_sel already changed from reset value: 0 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000008] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000041] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.001808] Console: colour dummy device 80x30 [ 0.001860] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001885] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001907] ... MAX_LOCK_DEPTH: 48 [ 0.001929] ... MAX_LOCKDEP_KEYS: 8192 [ 0.001950] ... CLASSHASH_SIZE: 4096 [ 0.001971] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001992] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.002013] ... CHAINHASH_SIZE: 32768 [ 0.002033] memory used by lock dependency info: 4061 kB [ 0.002054] memory used for stack traces: 2112 kB [ 0.002075] per task-struct memory footprint: 1536 bytes [ 0.002200] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.002247] pid_max: default: 32768 minimum: 301 [ 0.002634] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.002684] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.006276] CPU: Testing write buffer coherency: ok [ 0.006421] CPU0: Spectre v2: using BPIALL workaround [ 0.007377] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.010562] Setting up static identity map for 0x10100000 - 0x10100078 [ 0.011328] rcu: Hierarchical SRCU implementation. [ 0.013375] smp: Bringing up secondary CPUs ... [ 0.013416] smp: Brought up 1 node, 1 CPU [ 0.013449] SMP: Total of 1 processors activated (6.00 BogoMIPS). [ 0.013480] CPU: All CPU(s) started in SVC mode. [ 0.016202] devtmpfs: initialized [ 0.055792] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.057105] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.057185] futex hash table entries: 256 (order: 2, 16384 bytes, linear) [ 0.060110] pinctrl core: initialized pinctrl subsystem [ 0.066760] NET: Registered protocol family 16 [ 0.097198] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.103362] thermal_sys: Registered thermal governor 'step_wise' [ 0.103692] cpuidle: using governor menu [ 0.103861] CPU identified as i.MX6DL, silicon rev 1.1 [ 0.598797] vdd1p1: supplied by regulator-dummy [ 0.621956] vdd3p0: supplied by regulator-dummy [ 0.644655] vdd2p5: supplied by regulator-dummy [ 0.667289] vddarm: supplied by regulator-dummy [ 0.690650] vddpu: supplied by regulator-dummy [ 0.712440] vddsoc: supplied by regulator-dummy [ 1.538863] No ATAGs? [ 1.539242] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 1.539343] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 1.545858] imx6dl-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver [ 1.678295] vgaarb: loaded [ 1.680802] SCSI subsystem initialized [ 1.682689] usbcore: registered new interface driver usbfs [ 1.682986] usbcore: registered new interface driver hub [ 1.683158] usbcore: registered new device driver usb [ 1.683623] usb_phy_generic usbphynop1: supply vcc not found, using dummy regulator [ 1.684517] usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests [ 1.685028] usb_phy_generic usbphynop2: supply vcc not found, using dummy regulator [ 1.685784] usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests [ 1.693006] i2c i2c-0: IMX I2C adapter registered [ 1.697775] i2c i2c-1: IMX I2C adapter registered [ 1.701428] i2c i2c-3: IMX I2C adapter registered [ 1.702071] mc: Linux media interface: v0.10 [ 1.702238] videodev: Linux video capture interface: v2.00 [ 1.702917] pps_core: LinuxPPS API ver. 1 registered [ 1.702954] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.703048] PTP clock support registered [ 1.705052] Advanced Linux Sound Architecture Driver Initialized. [ 1.713542] Bluetooth: Core ver 2.22 [ 1.713717] NET: Registered protocol family 31 [ 1.713753] Bluetooth: HCI device and connection manager initialized [ 1.713902] Bluetooth: HCI socket layer initialized [ 1.713957] Bluetooth: L2CAP socket layer initialized [ 1.714152] Bluetooth: SCO socket layer initialized [ 1.717074] clocksource: Switched to clocksource mxc_timer1 [ 3.168504] VFS: Disk quotas dquot_6.6.0 [ 3.168717] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 3.204894] NET: Registered protocol family 2 [ 3.205585] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 3.209034] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 22528 bytes, linear) [ 3.209197] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 3.209372] TCP bind hash table entries: 8192 (order: 6, 327680 bytes, linear) [ 3.210533] TCP: Hash tables configured (established 8192 bind 8192) [ 3.211195] UDP hash table entries: 512 (order: 3, 49152 bytes, linear) [ 3.211417] UDP-Lite hash table entries: 512 (order: 3, 49152 bytes, linear) [ 3.212072] NET: Registered protocol family 1 [ 3.215433] RPC: Registered named UNIX socket transport module. [ 3.215549] RPC: Registered udp transport module. [ 3.215586] RPC: Registered tcp transport module. [ 3.215620] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 3.217616] PCI: CLS 0 bytes, default 64 [ 3.219354] Trying to unpack rootfs image as initramfs... [ 4.469990] Freeing initrd memory: 9940K [ 4.472576] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 4.479313] Initialise system trusted keyrings [ 4.480264] workingset: timestamp_bits=30 max_order=18 bucket_order=0 [ 4.508540] NFS: Registering the id_resolver key type [ 4.508775] Key type id_resolver registered [ 4.508889] Key type id_legacy registered [ 4.509308] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 4.509438] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 4.509660] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 4.511859] fuse: init (API version 7.32) [ 4.610872] Key type asymmetric registered [ 4.611065] Asymmetric key parser 'x509' registered [ 4.611435] bounce: pool size: 64 pages [ 4.611591] io scheduler mq-deadline registered [ 4.611631] io scheduler kyber registered [ 4.643532] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 4.643658] imx-sdma 20ec000.sdma: Falling back to sysfs fallback for: imx/sdma/sdma-imx6q.bin [ 4.650849] mxs-dma 110000.dma-apbh: initialized [ 4.665043] pfuze100-regulator 0-0008: Full layer: 1, Metal layer: 1 [ 4.666038] pfuze100-regulator 0-0008: FAB: 0, FIN: 0 [ 4.666078] pfuze100-regulator 0-0008: pfuze100 found. [ 4.701958] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 32, base_baud = 5000000) is a IMX [ 4.708151] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 75, base_baud = 5000000) is a IMX [ 5.610369] printk: console [ttymxc1] enabled [ 5.618406] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 76, base_baud = 5000000) is a IMX [ 5.631464] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 77, base_baud = 5000000) is a IMX [ 5.643991] 21f4000.serial: ttymxc4 at MMIO 0x21f4000 (irq = 78, base_baud = 5000000) is a IMX [ 5.691122] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops) [ 5.697942] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops) [ 5.703567] etnaviv-gpu 130000.gpu: model: GC880, revision: 5106 [ 5.710686] etnaviv-gpu 134000.gpu: model: GC320, revision: 5007 [ 5.720288] [drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor 0 [ 5.739337] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_crtc_ops) [ 5.747437] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_crtc_ops) [ 5.756207] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.31a with HDCP (DWC HDMI 3D TX PHY) [ 5.773584] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops) [ 5.784370] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1 [ 5.794302] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 5.802643] imx-ipuv3 2400000.ipu: IPUv3H probed [ 5.848319] brd: module loaded [ 5.893115] loop: module loaded [ 5.912220] CAN device driver interface [ 5.922292] pps pps0: new PPS source ptp0 [ 5.997822] fec 2188000.ethernet eth0: registered PHC device 0 [ 6.008022] usbcore: registered new interface driver r8152 [ 6.013679] usbcore: registered new interface driver lan78xx [ 6.019732] usbcore: registered new interface driver asix [ 6.025306] usbcore: registered new interface driver ax88179_178a [ 6.031655] usbcore: registered new interface driver cdc_ether [ 6.037764] usbcore: registered new interface driver smsc95xx [ 6.043667] usbcore: registered new interface driver net1080 [ 6.049541] usbcore: registered new interface driver cdc_subset [ 6.055611] usbcore: registered new interface driver zaurus [ 6.061414] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 6.069150] usbcore: registered new interface driver cdc_ncm [ 6.074839] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 6.081453] ehci-pci: EHCI PCI platform driver [ 6.086063] ehci-mxc: Freescale On-Chip EHCI Host driver [ 6.092876] usbcore: registered new interface driver usb-storage [ 6.121994] snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc0 [ 6.128455] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01T00:00:00 UTC (0) [ 6.138061] i2c /dev entries driver [ 6.158358] Bluetooth: HCI UART driver ver 2.3 [ 6.162844] Bluetooth: HCI UART protocol H4 registered [ 6.168190] Bluetooth: HCI UART protocol LL registered [ 6.177238] sdhci: Secure Digital Host Controller Interface driver [ 6.183453] sdhci: Copyright(c) Pierre Ossman [ 6.187902] sdhci-pltfm: SDHCI platform and OF driver helper [ 6.197621] sdhci-esdhc-imx 2194000.mmc: Got CD GPIO [ 6.202858] sdhci-esdhc-imx 2194000.mmc: Got WP GPIO [ 6.214383] sdhci-esdhc-imx 2198000.mmc: Got CD GPIO [ 6.228046] sdhci-esdhc-imx 2198000.mmc: Got WP GPIO [ 6.239361] caam 2100000.crypto: Entropy delay = 3200 [ 6.305304] caam 2100000.crypto: Instantiated RNG4 SH0 [ 6.366059] caam 2100000.crypto: Instantiated RNG4 SH1 [ 6.375148] caam 2100000.crypto: device ID = 0x0a16010000000100 (Era 4) [ 6.381959] caam 2100000.crypto: job rings = 2, qi = 0 [ 6.387484] mmc3: SDHCI controller on 219c000.mmc [219c000.mmc] using ADMA [ 6.411712] mmc1: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA [ 6.419518] mmc2: SDHCI controller on 2198000.mmc [2198000.mmc] using ADMA [ 6.458835] caam algorithms registered in /proc/crypto [ 6.471507] caam 2100000.crypto: registering rng-caam [ 6.484911] mmc3: new DDR MMC card at address 0001 [ 6.492071] usbcore: registered new interface driver usbhid [ 6.497869] usbhid: USB HID core driver [ 6.509044] mmcblk3: mmc3:0001 MMC04G 3.58 GiB [ 6.514705] mmcblk3boot0: mmc3:0001 MMC04G partition 1 2.00 MiB [ 6.523375] ipu1_csi0: Registered ipu1_csi0 capture as /dev/video0 [ 6.531518] ipu1_ic_prpenc: Registered ipu1_ic_prpenc capture as /dev/video1 [ 6.539986] mmcblk3boot1: mmc3:0001 MMC04G partition 2 2.00 MiB [ 6.547983] ipu1_ic_prpvf: Registered ipu1_ic_prpvf capture as /dev/video2 [ 6.556626] mmcblk3rpmb: mmc3:0001 MMC04G partition 3 128 KiB, chardev (243:0) [ 6.565125] ipu1_csi1: Registered ipu1_csi1 capture as /dev/video3 [ 6.619828] sgtl5000 0-000a: sgtl5000 revision 0x11 [ 6.630493] sgtl5000 0-000a: Using internal LDO instead of VDDD: check ER1 erratum [ 6.661632] random: crng init done [ 6.694281] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 6.758519] NET: Registered protocol family 10 [ 6.768121] Segment Routing with IPv6 [ 6.771963] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 6.780788] NET: Registered protocol family 17 [ 6.785311] can: controller area network core [ 6.790300] NET: Registered protocol family 29 [ 6.794783] can: raw protocol [ 6.798143] can: broadcast manager protocol [ 6.802400] can: netlink gateway - max_hops=1 [ 6.807636] Key type dns_resolver registered [ 6.824003] Registering SWP/SWPB emulation handler [ 6.832711] Loading compiled-in X.509 certificates [ 6.998055] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 7.003663] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 7.037147] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 7.044587] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 7.053176] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.060536] usb usb1: Product: EHCI Host Controller [ 7.065453] usb usb1: Manufacturer: Linux 5.10.153-cip19 ehci_hcd [ 7.071646] usb usb1: SerialNumber: ci_hdrc.1 [ 7.081575] hub 1-0:1.0: USB hub found [ 7.085809] hub 1-0:1.0: 1 port detected [ 7.109876] imx-media: Registered ipu_ic_pp csc/scaler as /dev/video4 [ 7.121907] imx_thermal 20c8000.anatop:tempmon: Commercial CPU temperature grade - max:95C critical:90C passive:85C [ 7.140533] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 7.200284] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 7.208949] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 7.217808] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db [ 7.226055] ALSA device list: [ 7.229859] #0: imx6-riotboard-sgtl5000 [ 7.238543] Freeing unused kernel memory: 1024K [ 7.257560] Run /init as init process [ 7.387272] usb 1-1: new high-speed USB device number 2 using ci_hdrc Starting syslogd: OK Starting klogd: OK Running sysctl: [ 7.599515] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.00 [ 7.608053] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 7.615281] usb 1-1: Product: USB 2.0 Hub [MTT] OK [ 7.671418] hub 1-1:1.0: USB hub found Populating /dev using udev: [ 7.684443] hub 1-1:1.0: 4 ports detected [ 7.716159] udevd[180]: starting version 3.2.9 [ 7.736849] udevd[180]: specified user 'tss' unknown [ 7.742291] udevd[180]: specified group 'tss' unknown [ 7.768448] udevd[181]: starting eudev-3.2.9 [ 9.441626] coda 2040000.vpu: Direct firmware load for vpu_fw_imx6d.bin failed with error -2 [ 9.450286] coda 2040000.vpu: Falling back to sysfs fallback for: vpu_fw_imx6d.bin done Saving random seed: OK Starting network: OK Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-821734/environment . /lava-821734/environment / # /lava-821734/bin/lava-test-runner /lava-821734/0 /lava-821734/bin/lava-test-runner /lava-821734/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-821734/0/tests/0_dmesg + cat uuid + UUID=821734_1.5.2.3.1[ 11.835167] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 11.943629] [ 12.040062] [ 12.135571] + set +x [ 12.146739] # / # #export SHELL=/bin/sh / # export SHELL=/bin/sh. /lava-821734/environment / # . /lava-821734/environment/lava-821734/bin/lava-test-runner /lava-821734/1 / # /lava-821734/bin/lava-test-runner /lava-821734/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-821734/1/tests/1_bootrr + cat uuid + UUID=821734_1.5.2.3.5[ 12.771233] + set +x + export 'PATH=/opt/bootrr/helpers:/lava-821734/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr + sh helpers/bootrr-auto /lava-821734/1/../bin/lava-test-case [ 13.894770] /lava-821734/1/../bin/lava-test-case [ 13.985659] /lava-821734/1/../bin/lava-test-case [ 14.035734] + set +x [ 14.072716] / #