Trying 192.168.56.21... Connected to conserv1. Escape character is '^]'. ser2net port telnet,3004 device serialdev, /dev/serial/by-path/platform-fd500000.pcie-pci-0000:01:00.0-usb-0:1.2.2.2:1.0-port0, 115200n81, local=false [] (Debian GNU/Linux) U-Boot SPL 2015.10-00061-g68849f9 (Jan 08 2016 - 17:01:43) U-Boot 2015.10-00061-g68849f9 (Jan 08 2016 - 17:01:43 +0100) CPU: Freescale i.MX6DL rev1.1 at 792 MHz Reset cause: POR Board: UDOO DualLite DRAM: 1 GiB MMC: FSL_SDHC: 0 *** Warning - bad CRC, using default environment No panel detected: default to HDMI Display: HDMI (1024x768) In: serial Out: serial Err: serial Net: using phy at 6 FEC [PRIME] Hit any key to stop autoboot: 3  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.... done BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 BOOTP broadcast 5 *** Unhandled DHCP Option in OFFER/ACK: 42 *** Unhandled DHCP Option in OFFER/ACK: 42 DHCP client bound to address 192.168.56.142 (3811 ms) => setenv serverip 192.168.56.75 setenv serverip 192.168.56.75 => tftp 0x12000000 110087/tftp-deploy-qc1_pmdr/kernel/zImage tftp 0x12000000 110087/tftp-deploy-qc1_pmdr/kernel/zImage Using FEC device TFTP from server 192.168.56.75; our IP address is 192.168.56.142 Filename '110087/tftp-deploy-qc1_pmdr/kernel/zImage'. Load address: 0x12000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ########## 10 MiB/s done Bytes transferred = 9683456 (93c200 hex) => tftp 0x13000000 110087/tftp-deploy-qc1_pmdr/ramdisk/ramdisk.cpio.gz.uboot tftp 0x13000000 110087/tftp-deploy-qc1_pmdr/ramdisk/ramdisk.cpio.gz.uboot Using FEC device TFTP from server 192.168.56.75; our IP address is 192.168.56.142 Filename '110087/tftp-deploy-qc1_pmdr/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x13000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################### 10 MiB/s done Bytes transferred = 12134255 (b9276f hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x18000000 110087/tftp-deploy-qc1_pmdr/dtb/imx6dl-udoo.dtb tftp 0x18000000 110087/tftp-deploy-qc1_pmdr/dtb/imx6dl-udoo.dtb Using FEC device TFTP from server 192.168.56.75; our IP address is 192.168.56.142 Filename '110087/tftp-deploy-qc1_pmdr/dtb/imx6dl-udoo.dtb'. Load address: 0x18000000 Loading: *### 6.7 MiB/s done Bytes transferred = 35107 (8923 hex) => setenv bootargs 'console=ttymxc1,115200n8 root=/dev/nfs rw nfsroot=192.168.56.75:/var/lib/lava/dispatcher/tmp/110087/extract-nfsrootfs-jhdwb8q5,tcp,hard console_msg_format=syslog earlycon ip=dhcp' setenv bootargs 'console=ttymxc1,115200n8 root=/dev/nfs rw nfsroot=192.168.56.75:/var/lib/lava/dispatcher/tmp/110087/extract-nfsrootfs-jhdwb8q5,tcp,hard console_msg_format=syslog earlycon ip=dhcp' => bootz 0x12000000 0x13000000 0x18000000 bootz 0x12000000 0x13000000 0x18000000 Kernel image @ 0x12000000 [ 0x000000 - 0x93c200 ] ## Loading init Ramdisk from Legacy Image at 13000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 12134191 Bytes = 11.6 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 18000000 Booting using the fdt blob at 0x18000000 Using Device Tree in place at 18000000, end 1800b922 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.162-cip24 (KernelCI@build-j847971-arm-gcc-10-multi-v7-defconfig-6xxlj) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Sat Jan 14 01:52:44 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Udoo i.MX6 Dual-lite Board [ 0.000000] earlycon: ec_imx21 at MMIO 0x021e8000 (options '') [ 0.000000] printk: bootconsole [ec_imx21] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x4c000000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000010000000-0x000000003fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000040000000-0x000000004fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000010000000-0x000000004fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000004fffffff] [ 0.000000] percpu: Embedded 20 pages/cpu s49868 r8192 d23860 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260608 [ 0.000000] Kernel command line: console=ttymxc1,115200n8 root=/dev/nfs rw nfsroot=192.168.56.75:/var/lib/lava/dispatcher/tmp/110087/extract-nfsrootfs-jhdwb8q5,tcp,hard console_msg_format=syslog earlycon ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 937728K/1048576K available (13312K kernel code, 2231K rwdata, 5344K rodata, 2048K init, 424K bss, 45312K reserved, 65536K cma-reserved, 196608K highmem) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] L2C-310 erratum 769419 enabled <6>[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 <6>[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 <6>[ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines <6>[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled <6>[ 0.000000] L2C-310 cache controller enabled, 16 ways, 512 kB <6>[ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76450001 <6>[ 0.000000] Switching to timer-based delay loop, resolution 333ns <6>[ 0.000007] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns <6>[ 0.008444] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns <6>[ 0.021768] Console: colour dummy device 80x30 <6>[ 0.023666] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) <6>[ 0.034076] pid_max: default: 32768 minimum: 301 <6>[ 0.039110] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.046522] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.055164] CPU: Testing write buffer coherency: ok <6>[ 0.059667] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.065183] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 <6>[ 0.071539] Setting up static identity map for 0x10300000 - 0x103000ac <6>[ 0.079070] rcu: Hierarchical SRCU implementation. <6>[ 0.085675] EFI services will not be available. <6>[ 0.087830] smp: Bringing up secondary CPUs ... <6>[ 0.093179] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 <6>[ 0.093190] CPU1: Spectre v2: using BPIALL workaround <6>[ 0.103772] smp: Brought up 1 node, 2 CPUs <6>[ 0.108007] SMP: Total of 2 processors activated (12.00 BogoMIPS). <6>[ 0.114410] CPU: All CPU(s) started in SVC mode. <6>[ 0.119841] devtmpfs: initialized <6>[ 0.128976] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 <6>[ 0.134299] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.144208] futex hash table entries: 512 (order: 3, 32768 bytes, linear) <6>[ 0.154313] pinctrl core: initialized pinctrl subsystem <6>[ 0.158682] DMI not present or invalid. <6>[ 0.161799] NET: Registered protocol family 16 <6>[ 0.168209] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.175145] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.175329] cpuidle: using governor menu <6>[ 0.183508] CPU identified as i.MX6DL, silicon rev 1.1 <6>[ 0.292543] vdd1p1: supplied by regulator-dummy <6>[ 0.300325] vdd3p0: supplied by regulator-dummy <6>[ 0.308035] vdd2p5: supplied by regulator-dummy <6>[ 0.315756] vddarm: supplied by regulator-dummy <6>[ 0.323580] vddpu: supplied by regulator-dummy <6>[ 0.331054] vddsoc: supplied by regulator-dummy <6>[ 0.509790] No ATAGs? <6>[ 0.509923] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. <6>[ 0.517758] hw-breakpoint: maximum watchpoint size is 4 bytes. <6>[ 0.527347] imx6dl-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver <6>[ 0.536460] Serial: AMBA PL011 UART driver <6>[ 0.568822] iommu: Default domain type: Translated <6>[ 0.571397] vgaarb: loaded <5>[ 0.574892] SCSI subsystem initialized <6>[ 0.578630] usbcore: registered new interface driver usbfs <6>[ 0.583858] usbcore: registered new interface driver hub <6>[ 0.589499] usbcore: registered new device driver usb <6>[ 0.595989] i2c i2c-1: IMX I2C adapter registered <6>[ 0.600250] i2c i2c-2: IMX I2C adapter registered <6>[ 0.605793] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.609828] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.619263] PTP clock support registered <6>[ 0.626966] clocksource: Switched to clocksource mxc_timer1 <6>[ 1.688108] NET: Registered protocol family 2 <6>[ 1.690115] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 1.698725] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) <6>[ 1.706176] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 1.714257] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 1.721687] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 1.728304] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 1.735062] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 1.742558] NET: Registered protocol family 1 <6>[ 1.747566] RPC: Registered named UNIX socket transport module. <6>[ 1.753124] RPC: Registered udp transport module. <6>[ 1.758147] RPC: Registered tcp transport module. <6>[ 1.763044] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 1.769772] PCI: CLS 0 bytes, default 64 <6>[ 1.774380] Trying to unpack rootfs image as initramfs... <6>[ 2.667527] Freeing initrd memory: 11852K <4>[ 2.669390] hw perfevents: no interrupt-affinity property for /pmu, guessing. <6>[ 2.676612] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available <5>[ 2.686391] Initialise system trusted keyrings <6>[ 2.689715] workingset: timestamp_bits=30 max_order=18 bucket_order=0 <6>[ 2.701956] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 2.705969] NFS: Registering the id_resolver key type <5>[ 2.710621] Key type id_resolver registered <5>[ 2.714946] Key type id_legacy registered <6>[ 2.719344] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 2.726170] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <6>[ 2.733873] ntfs: driver 2.1.32 [Flags: R/O]. <5>[ 2.738930] Key type asymmetric registered <5>[ 2.742788] Asymmetric key parser 'x509' registered <6>[ 2.747998] bounce: pool size: 64 pages <6>[ 2.752041] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) <6>[ 2.759692] io scheduler mq-deadline registered <6>[ 2.764448] io scheduler kyber registered <6>[ 2.800395] mxs-dma 110000.dma-apbh: initialized <4>[ 2.807340] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 <6>[ 2.814249] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware <6>[ 2.884345] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled <6>[ 2.892265] SuperH (H)SCI(F) driver initialized <6>[ 2.895204] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 70, base_baud = 5000000) is a IMX <6>[ 2.903186] printk: console [ttymxc1] enabled <6>[ 2.903186] printk: console [ttymxc1] enabled <6>[ 2.912330] printk: bootconsole [ec_imx21] disabled <6>[ 2.912330] printk: bootconsole [ec_imx21] disabled <6>[ 2.923533] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 71, base_baud = 5000000) is a IMX <6>[ 2.935716] msm_serial: driver initialized <6>[ 2.940397] STMicroelectronics ASC driver initialized <6>[ 2.947441] STM32 USART driver initialized <6>[ 2.968770] brd: module loaded <6>[ 2.980045] loop: module loaded <6>[ 2.997168] CAN device driver interface <6>[ 3.002342] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded <6>[ 3.010658] pps pps0: new PPS source ptp0 <6>[ 3.032131] fec 2188000.ethernet eth0: registered PHC device 0 <6>[ 3.039523] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 3.044757] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 3.051048] igb: Intel(R) Gigabit Ethernet Network Driver <6>[ 3.056714] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 3.067708] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver <6>[ 3.075426] usbcore: registered new interface driver pegasus <6>[ 3.081440] usbcore: registered new interface driver asix <6>[ 3.087165] usbcore: registered new interface driver ax88179_178a <6>[ 3.093555] usbcore: registered new interface driver cdc_ether <6>[ 3.099735] usbcore: registered new interface driver smsc75xx <6>[ 3.105790] usbcore: registered new interface driver smsc95xx <6>[ 3.111870] usbcore: registered new interface driver net1080 <6>[ 3.117854] usbcore: registered new interface driver cdc_subset <6>[ 3.124067] usbcore: registered new interface driver zaurus <6>[ 3.130001] usbcore: registered new interface driver cdc_ncm <6>[ 3.139042] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>[ 3.145843] ehci-pci: EHCI PCI platform driver <6>[ 3.150623] ehci-platform: EHCI generic platform driver <6>[ 3.156370] ehci-orion: EHCI orion driver <6>[ 3.160877] SPEAr-ehci: EHCI SPEAr driver <6>[ 3.165316] ehci-st: EHCI STMicroelectronics driver <6>[ 3.170657] ehci-exynos: EHCI Exynos driver <6>[ 3.175259] ehci-atmel: EHCI Atmel driver <6>[ 3.179715] tegra-ehci: Tegra EHCI driver <6>[ 3.184170] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver <6>[ 3.190670] ohci-pci: OHCI PCI platform driver <6>[ 3.195432] ohci-platform: OHCI generic platform driver <6>[ 3.201199] SPEAr-ohci: OHCI SPEAr driver <6>[ 3.205648] ohci-st: OHCI STMicroelectronics driver <6>[ 3.210995] ohci-atmel: OHCI Atmel driver <6>[ 3.216194] usbcore: registered new interface driver usb-storage <6>[ 3.229814] i2c /dev entries driver <6>[ 3.251395] sdhci: Secure Digital Host Controller Interface driver <6>[ 3.257904] sdhci: Copyright(c) Pierre Ossman <6>[ 3.264861] Synopsys Designware Multimedia Card Interface Driver <6>[ 3.272885] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 3.283487] sdhci-esdhc-imx 2198000.mmc: Got CD GPIO <6>[ 3.289155] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 3.296462] usbcore: registered new interface driver usbhid <6>[ 3.302353] usbhid: USB HID core driver <6>[ 3.312589] NET: Registered protocol family 10 <6>[ 3.318422] Segment Routing with IPv6 <6>[ 3.322431] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 3.329250] NET: Registered protocol family 17 <6>[ 3.333975] can: controller area network core <6>[ 3.338726] NET: Registered protocol family 29 <6>[ 3.338877] mmc2: SDHCI controller on 2198000.mmc [2198000.mmc] using ADMA <6>[ 3.343442] can: raw protocol <6>[ 3.353877] can: broadcast manager protocol <6>[ 3.358373] can: netlink gateway - max_hops=1 <5>[ 3.363509] Key type dns_resolver registered <6>[ 3.369999] ThumbEE CPU extension supported. <5>[ 3.374550] Registering SWP/SWPB emulation handler <5>[ 3.380225] Loading compiled-in X.509 certificates <4>[ 3.404370] imx_usb 2184000.usb: No over current polarity defined <4>[ 3.439392] mmc2: host does not support reading read-only switch, assuming write-enable <6>[ 3.449750] mmc2: new high speed SDXC card at address 59b4 <6>[ 3.456145] mmcblk2: mmc2:59b4 SD128 119 GiB <6>[ 3.463733] mmcblk2: p1 p2 <3>[ 4.019148] mxs_phy 20c9000.usbphy: Data pin can't make good contact. <4>[ 4.030221] imx_usb 2184200.usb: No over current polarity defined