[Enter `^Ec?' for help] U-Boot 2016.03-rc1-00131-g39af3d8-dirty (Feb 09 2016 - 16:39:49 +0000) DRAM: 944 MiB WARNING: Caches not enabled RPI Model B+ (0x10) MMC: bcm2835_sdhci: 0 reading uboot.env In: serial Out: lcd Err: lcd Net: Net Initialization Skipped No ethernet found. starting USB... USB0: Core Release: 2.80a scanning bus 0 for devices... 4 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found Hit any key to stop autoboot: 2  0 U-Boot> usb start usb start U-Boot> setenv autoload no setenv autoload no U-Boot> setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff U-Boot> setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff U-Boot> dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.101.213 (414 ms) U-Boot> setenv serverip 192.168.101.1 setenv serverip 192.168.101.1 U-Boot> tftp 0x01000000 9097589/tftp-deploy-wsb_imt2/kernel/zImage tftp 0x01000000 9097589/tftp-deploy-wsb_imt2/kernel/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.101.1; our IP address is 192.168.101.213 Filename '9097589/tftp-deploy-wsb_imt2/kernel/zImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ###### 539.1 KiB/s done Bytes transferred = 5804288 (589100 hex) U-Boot> tftp 0x02200000 9097589/tftp-deploy-wsb_imt2/ramdisk/ramdisk.cpio.gz.uboot tftp 0x02200000 9097589/tftp-deploy-wsb_imt2/ramdisk/ramdisk.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.101.1; our IP address is 192.168.101.213 Filename '9097589/tftp-deploy-wsb_imt2/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x2200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################## 1005.9 KiB/s done Bytes transferred = 9249894 (8d2466 hex) U-Boot> setenv initrd_size ${filesize} setenv initrd_size ${filesize} U-Boot> tftp 0x00000100 9097589/tftp-deploy-wsb_imt2/dtb/bcm2836-rpi-2-b.dtb tftp 0x00000100 9097589/tftp-deploy-wsb_imt2/dtb/bcm2836-rpi-2-b.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.101.1; our IP address is 192.168.101.213 Filename '9097589/tftp-deploy-wsb_imt2/dtb/bcm2836-rpi-2-b.dtb'. Load address: 0x100 Loading: *# 954.1 KiB/s done Bytes transferred = 13687 (3577 hex) U-Boot> setenv bootargs 'console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' setenv bootargs 'console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' U-Boot> bootz 0x01000000 0x02200000 0x00000100 bootz 0x01000000 0x02200000 0x00000100 Kernel image @ 0x1000000 [ 0x000000 - 0x589100 ] ## Loading init Ramdisk from Legacy Image at 02200000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 9249830 Bytes = 8.8 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 00000100 Booting using the fdt blob at 0x000100 reserving fdt memory region: addr=0 size=1000 Using Device Tree in place at 00000100, end 00006676 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.167-cip26 (KernelCI@build-j1016914-arm-gcc-10-bcm2835-defconfig-9t6bn) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 Fri Feb 10 10:16:20 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 2 Model B [ 0.000000] earlycon: pl11 at MMIO 0x3f201000 (options '115200n8') [ 0.000000] printk: bootconsole [pl11] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Ignoring RAM at 0x30000000-0x3b000000 [ 0.000000] Consider using a HIGHMEM enabled kernel. [ 0.000000] Reserved memory: created CMA memory pool at 0x2c000000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm/kernel/devtree.c:148 arm_dt_init_cpu_maps+0x1b8/0x200 [ 0.000000] DT /cpu 2 nodes greater than max cores 1, capping them [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.10.167-cip26 #1 [ 0.000000] Hardware name: BCM2835 [ 0.000000] Backtrace: [ 0.000000] [] (dump_backtrace) from [] (show_stack+0x20/0x24) [ 0.000000] r7:c0e01edc r6:00000000 r5:00000009 r4:c0bbd69e [ 0.000000] [] (show_stack) from [] (dump_stack+0x28/0x30) [ 0.000000] [] (dump_stack) from [] (__warn+0x9c/0xdc) [ 0.000000] r5:00000009 r4:c0b344e0 [ 0.000000] [] (__warn) from [] (warn_slowpath_fmt+0x88/0xcc) [ 0.000000] r9:c0f759e8 r8:c0b34559 r7:00000009 r6:c0d04d08 r5:00000094 r4:c0b344e0 [ 0.000000] [] (warn_slowpath_fmt) from [] (arm_dt_init_cpu_maps+0x1b8/0x200) [ 0.000000] r8:c0b3448d r7:00000000 r6:ff000000 r5:00000000 r4:eb9d96c4 [ 0.000000] [] (arm_dt_init_cpu_maps) from [] (setup_arch+0x26c/0x644) [ 0.000000] r10:c0e01f70 r9:c0e01f68 r8:ebffff00 r7:c0bcb0c8 r6:2fffffff r5:c0e08738 [ 0.000000] r4:c0d34010 [ 0.000000] [] (setup_arch) from [] (start_kernel+0x64/0x520) [ 0.000000] r10:10c53c7d r9:410fc075 r8:00000100 r7:c0f8f03c r6:c0e04240 r5:00000051 [ 0.000000] r4:c0d004b0 [ 0.000000] [] (start_kernel) from [<00000000>] (0x0) [ 0.000000] r9:410fc075 r8:00000100 r7:00000000 r6:10c03c7d r5:00000051 r4:c0d004b0 [ 0.000000] ---[ end trace 58996bc4bee07162 ]--- [ 0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 195072 [ 0.000000] Kernel command line: console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 689072K/786432K available (8192K kernel code, 1595K rwdata, 3248K rodata, 1024K init, 709K bss, 31824K reserved, 65536K cma-reserved) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 <6>[ 0.000000] ftrace: allocating 32671 entries in 96 pages <6>[ 0.000000] ftrace: allocated 96 pages with 2 groups <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <3>[ 0.000000] [Firmware Bug]: Bootloader left irq enabled: bank 1 irq 9 <6>[ 0.000019] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns <6>[ 0.008818] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns <6>[ 0.018640] bcm2835: system timer (irq = 27) <6>[ 0.023781] arch_timer: cp15 timer(s) running at 19.20MHz (virt). <6>[ 0.030276] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns <6>[ 0.041542] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns <6>[ 0.049974] Switching to timer-based delay loop, resolution 52ns <6>[ 0.056774] Console: colour dummy device 80x30 <6>[ 0.061641] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) <6>[ 0.072486] pid_max: default: 32768 minimum: 301 <6>[ 0.077835] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.085587] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.094764] CPU: Testing write buffer coherency: ok <6>[ 0.101106] Setting up static identity map for 0x100000 - 0x100054 <6>[ 0.109372] devtmpfs: initialized <6>[ 0.119172] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 <6>[ 0.127586] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.137905] futex hash table entries: 256 (order: -1, 3072 bytes, linear) <6>[ 0.148348] pinctrl core: initialized pinctrl subsystem <6>[ 0.155937] NET: Registered protocol family 16 <6>[ 0.162859] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.173601] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.174062] No ATAGs? <6>[ 0.183091] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. <6>[ 0.191517] hw-breakpoint: maximum watchpoint size is 8 bytes. <6>[ 0.198067] Serial: AMBA PL011 UART driver <6>[ 0.223339] Kprobes globally optimized <5>[ 0.232716] SCSI subsystem initialized <6>[ 0.237133] usbcore: registered new interface driver usbfs <6>[ 0.243134] usbcore: registered new interface driver hub <6>[ 0.248870] usbcore: registered new device driver usb <4>[ 0.254541] usb_phy_generic phy: supply vcc not found, using dummy regulator <4>[ 0.262182] usb_phy_generic phy: dummy supplies not allowed for exclusive requests <6>[ 0.270443] mc: Linux media interface: v0.10 <6>[ 0.275104] videodev: Linux video capture interface: v2.00 <6>[ 0.281249] Advanced Linux Sound Architecture Driver Initialized. <6>[ 0.288452] Bluetooth: Core ver 2.22 <6>[ 0.292466] NET: Registered protocol family 31 <6>[ 0.297263] Bluetooth: HCI device and connection manager initialized <6>[ 0.304027] Bluetooth: HCI socket layer initialized <6>[ 0.309266] Bluetooth: L2CAP socket layer initialized <6>[ 0.314708] Bluetooth: SCO socket layer initialized <6>[ 0.320498] clocksource: Switched to clocksource arch_sys_counter <6>[ 0.570585] simple-framebuffer 3b006000.framebuffer: framebuffer at 0x3b006000, 0x85400 bytes, mapped to 0x(ptrval) <6>[ 0.581540] simple-framebuffer 3b006000.framebuffer: format=r5g6b5, mode=656x416x16, linelength=1312 <6>[ 0.594923] Console: switching to colour frame buffer device 82x26 <6>[ 0.604530] simple-framebuffer 3b006000.framebuffer: fb0: simplefb registered! <6>[ 0.622145] NET: Registered protocol family 2 <6>[ 0.627368] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 0.636799] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) <6>[ 0.645691] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 0.653948] TCP bind hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 0.661588] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 0.668564] UDP hash table entries: 512 (order: 1, 8192 bytes, linear) <6>[ 0.675540] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes, linear) <6>[ 0.683135] NET: Registered protocol family 1 <6>[ 0.688626] RPC: Registered named UNIX socket transport module. <6>[ 0.694973] RPC: Registered udp transport module. <6>[ 0.700032] RPC: Registered tcp transport module. <6>[ 0.705099] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.713897] Unpacking initramfs... <6>[ 1.508635] Freeing initrd memory: 9036K <6>[ 1.514078] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available <5>[ 1.524119] Initialise system trusted keyrings <6>[ 1.529421] workingset: timestamp_bits=30 max_order=18 bucket_order=0 <6>[ 1.546887] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). <5>[ 1.671686] Key type asymmetric registered <5>[ 1.676134] Asymmetric key parser 'x509' registered <6>[ 1.681621] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) <6>[ 1.689434] io scheduler mq-deadline registered <6>[ 1.694339] io scheduler kyber registered <6>[ 1.707118] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled <6>[ 1.719325] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver <6>[ 1.730748] usbcore: registered new interface driver zd1211rw <6>[ 1.736954] usbcore: registered new interface driver lan78xx <6>[ 1.743100] usbcore: registered new interface driver asix <6>[ 1.748933] usbcore: registered new interface driver ax88179_178a <6>[ 1.755472] usbcore: registered new interface driver cdc_ether <6>[ 1.761785] usbcore: registered new interface driver smsc95xx <6>[ 1.767953] usbcore: registered new interface driver net1080 <6>[ 1.774047] usbcore: registered new interface driver cdc_subset <6>[ 1.780386] usbcore: registered new interface driver zaurus <6>[ 1.786486] usbcore: registered new interface driver cdc_ncm <6>[ 1.793189] usbcore: registered new interface driver usb-storage <6>[ 1.799778] i2c /dev entries driver <4>[ 1.806069] i2c-bcm2835 3f805000.i2c: Could not read clock-frequency property <6>[ 1.815600] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer <6>[ 1.822797] sdhci: Secure Digital Host Controller Interface driver <6>[ 1.829362] sdhci: Copyright(c) Pierre Ossman <6>[ 1.834402] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 1.841873] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 1.848738] usbcore: registered new interface driver usbhid <6>[ 1.854750] usbhid: USB HID core driver <6>[ 1.859146] bcm2835-mbox 3f00b880.mailbox: mailbox enabled <6>[ 1.867153] NET: Registered protocol family 10 <6>[ 1.873355] Segment Routing with IPv6 <6>[ 1.877475] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 1.884733] NET: Registered protocol family 17 <6>[ 1.890094] oprofile: using timer interrupt. <5>[ 1.895151] Loading compiled-in X.509 certificates <6>[ 1.906824] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 81, base_baud = 0) is a PL011 rev2 <6>[ 1.916354] printk: console [ttyAMA0] enabled <6>[ 1.916354] printk: console [ttyAMA0] enabled <6>[ 1.925719] printk: bootconsole [pl11] disabled <6>[ 1.925719] printk: bootconsole [pl11] disabled <6>[ 1.939455] raspberrypi-firmware soc:firmware: Attached to firmware from 2014-12-19T18:44:06 <4>[ 1.950995] ------------[ cut here ]------------ <4>[ 1.955907] WARNING: CPU: 0 PID: 44 at drivers/cpufreq/cpufreq-dt.c:79 dt_cpufreq_probe+0xf8/0x2f0 <4>[ 1.965141] Modules linked in: <4>[ 1.968467] CPU: 0 PID: 44 Comm: kworker/0:2 Tainted: G W 5.10.167-cip26 #1 <4>[ 1.976991] Hardware name: BCM2835 <4>[ 1.980681] Workqueue: events deferred_probe_work_func <4>[ 1.986074] Backtrace: <4>[ 1.988802] [] (dump_backtrace) from [] (show_stack+0x20/0x24) <4>[ 1.996640] r7:00000000 r6:00000000 r5:00000009 r4:c0bbd69e <4>[ 2.002573] [] (show_stack) from [] (dump_stack+0x28/0x30) <4>[ 2.010058] [] (dump_stack) from [] (__warn+0x9c/0xdc) <4>[ 2.017194] r5:00000009 r4:c0ba6235 <4>[ 2.021043] [] (__warn) from [] (warn_slowpath_fmt+0x88/0xcc) <4>[ 2.028781] r9:c46fcbc8 r8:00000000 r7:00000009 r6:c062d7e4 r5:0000004f r4:c0ba6235 <4>[ 2.036792] [] (warn_slowpath_fmt) from [] (dt_cpufreq_probe+0xf8/0x2f0) <4>[ 2.045492] r8:00000000 r7:c46fba10 r6:c46fcbc0 r5:c0e08868 r4:00000000 <4>[ 2.052464] [] (dt_cpufreq_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.061185] r10:00000003 r9:c103178c r8:00000000 r7:c1031784 r6:c0f35e24 r5:c46fba10 <4>[ 2.069260] r4:00000000 <4>[ 2.072072] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.080598] r7:c1031784 r6:c0f35e24 r5:00000000 r4:c46fba10 <4>[ 2.086517] [] (really_probe) from [] (driver_probe_device+0x19c/0x1c8) <4>[ 2.095132] r10:00000003 r9:00000000 r8:c0f25548 r7:c46fba10 r6:c46ab7fc r5:c0f35e24 <4>[ 2.103219] r4:c46fba10 <4>[ 2.106019] [] (driver_probe_device) from [] (__device_attach_driver+0xb8/0xf8) <4>[ 2.115331] r9:00000000 r8:c0f25548 r7:c46fba10 r6:c46ab7fc r5:c0f35e24 r4:00000001 <4>[ 2.123342] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.132388] r7:c46fba54 r6:c051cd20 r5:c46ab7fc r4:00000000 <4>[ 2.138307] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.146831] r6:c46fba10 r5:00000001 r4:c46fba10 <4>[ 2.151722] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.160507] r7:00000000 r6:c46fba10 r5:c0f254f0 r4:c46fba10 <4>[ 2.166427] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.175320] [] (bus_probe_device) from [] (device_add+0x5d4/0x6f8) <4>[ 2.183500] r7:00000000 r6:c0f251e8 r5:00000000 r4:c46fba10 <4>[ 2.189419] [] (device_add) from [] (platform_device_add+0x190/0x1f8) <4>[ 2.197862] r9:c0e0b434 r8:c0e0b414 r7:05f5e100 r6:00000000 r5:00000000 r4:c46fba00 <4>[ 2.205871] [] (platform_device_add) from [] (platform_device_register_full+0xf0/0x124) <4>[ 2.215874] r9:05f5e0ff r8:2faf0800 r7:05f5e100 r6:c46ab8e0 r5:00000000 r4:c46fba00 <4>[ 2.223885] [] (platform_device_register_full) from [] (raspberrypi_cpufreq_probe+0x10c/0x198) <4>[ 2.234490] r7:05f5e100 r6:c0e08868 r5:00000000 r4:00000000 <4>[ 2.240409] [] (raspberrypi_cpufreq_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.249891] r9:c103178c r8:00000000 r7:c1031784 r6:c0f35f1c r5:c46fb610 r4:00000000 <4>[ 2.257906] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.266433] r7:c1031784 r6:c0f35f1c r5:00000000 r4:c46fb610 <4>[ 2.272367] [] (really_probe) from [] (driver_probe_device+0x19c/0x1c8) <4>[ 2.280988] r10:c46fc2c0 r9:00000000 r8:c46fb410 r7:c46fb610 r6:c46aba2c r5:c0f35f1c <4>[ 2.289064] r4:c46fb610 <4>[ 2.291883] [] (driver_probe_device) from [] (__device_attach_driver+0xb8/0xf8) <4>[ 2.301193] r9:00000000 r8:c46fb410 r7:c46fb610 r6:c46aba2c r5:c0f35f1c r4:00000001 <4>[ 2.309193] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.318238] r7:c46fb654 r6:c051cd20 r5:c46aba2c r4:00000000 <4>[ 2.324168] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.332691] r6:c46fb610 r5:00000001 r4:c46fb610 <4>[ 2.337570] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.346356] r7:00000000 r6:c46fb610 r5:c0f254f0 r4:c46fb610 <4>[ 2.352286] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.361163] [] (bus_probe_device) from [] (device_add+0x5d4/0x6f8) <4>[ 2.369331] r7:00000000 r6:c0f251e8 r5:00000000 r4:c46fb610 <4>[ 2.375259] [] (device_add) from [] (platform_device_add+0x190/0x1f8) <4>[ 2.383701] r9:c0e0b434 r8:c0e0b414 r7:00000000 r6:00000000 r5:00000000 r4:c46fb600 <4>[ 2.391715] [] (platform_device_add) from [] (platform_device_register_full+0xf0/0x124) <4>[ 2.401717] r9:c46fb410 r8:c46eaed0 r7:00000000 r6:c46abb18 r5:00000000 r4:c46fb600 <4>[ 2.409723] [] (platform_device_register_full) from [] (raspberrypi_clk_probe+0x160/0x31c) <4>[ 2.419981] r7:00000000 r6:00000000 r5:c46fc240 r4:00000000 <4>[ 2.425911] [] (raspberrypi_clk_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.435047] r10:00000003 r9:c103178c r8:00000000 r7:c1031784 r6:c0f1f68c r5:c46fb410 <4>[ 2.443133] r4:00000000 <4>[ 2.445932] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.454458] r7:c1031784 r6:c0f1f68c r5:00000000 r4:c46fb410 <4>[ 2.460378] [] (really_probe) from [] (driver_probe_device+0x19c/0x1c8) <4>[ 2.468993] r10:00000003 r9:00000000 r8:c1594c10 r7:c46fb410 r6:c46abc6c r5:c0f1f68c <4>[ 2.477080] r4:c46fb410 <4>[ 2.479880] [] (driver_probe_device) from [] (__device_attach_driver+0xb8/0xf8) <4>[ 2.489193] r9:00000000 r8:c1594c10 r7:c46fb410 r6:c46abc6c r5:c0f1f68c r4:00000001 <4>[ 2.497204] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.506254] r7:c46fb454 r6:c051cd20 r5:c46abc6c r4:00000000 <4>[ 2.512185] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.520709] r6:c46fb410 r5:00000001 r4:c46fb410 <4>[ 2.525589] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.534374] r7:00000000 r6:c46fb410 r5:c0f254f0 r4:c46fb410 <4>[ 2.540294] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.549171] [] (bus_probe_device) from [] (device_add+0x5d4/0x6f8) <4>[ 2.557350] r7:00000000 r6:c0f251e8 r5:00000000 r4:c46fb410 <4>[ 2.563279] [] (device_add) from [] (platform_device_add+0x190/0x1f8) <4>[ 2.571721] r9:c0e0b434 r8:c0e0b414 r7:c1594c00 r6:00000000 r5:00000000 r4:c46fb400 <4>[ 2.579719] [] (platform_device_add) from [] (platform_device_register_full+0xf0/0x124) <4>[ 2.589721] r9:c103178c r8:00000001 r7:c1594c00 r6:c46abd58 r5:00000000 r4:c46fb400 <4>[ 2.597735] [] (platform_device_register_full) from [] (rpi_firmware_probe+0x1a4/0x1ec) <4>[ 2.607736] r7:c1594c00 r6:c1594c10 r5:c46fa2c0 r4:00000000 <4>[ 2.613669] [] (rpi_firmware_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.622544] r8:00000000 r7:c1031784 r6:c0f3783c r5:c1594c10 r4:00000000 <4>[ 2.629503] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.638029] r7:c1031784 r6:c0f3783c r5:00000000 r4:c1594c10 <4>[ 2.643960] [] (really_probe) from [] (driver_probe_device+0x19c/0x1c8) <4>[ 2.652575] r10:c0f25444 r9:00000000 r8:00000000 r7:c1594c10 r6:c46abea4 r5:c0f3783c <4>[ 2.660662] r4:c1594c10 <4>[ 2.663462] [] (driver_probe_device) from [] (__device_attach_driver+0xb8/0xf8) <4>[ 2.672770] r9:00000000 r8:00000000 r7:c1594c10 r6:c46abea4 r5:c0f3783c r4:00000001 <4>[ 2.680780] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.689815] r7:c1594c54 r6:c051cd20 r5:c46abea4 r4:00000000 <4>[ 2.695748] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.704272] r6:c1594c10 r5:00000001 r4:c1594c10 <4>[ 2.709151] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.717937] r7:eb9c7300 r6:c1594c10 r5:c0f254f0 r4:c1594c10 <4>[ 2.723871] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.732751] [] (bus_probe_device) from [] (deferred_probe_work_func+0xa8/0xcc) <4>[ 2.741970] r7:eb9c7300 r6:c0f25468 r5:c0f2542c r4:c1594c10 <4>[ 2.747892] [] (deferred_probe_work_func) from [] (process_one_work+0x194/0x274) <4>[ 2.757285] r7:eb9c7300 r6:c0e0d18c r5:c0f25440 r4:c4693c80 <4>[ 2.763213] [] (process_one_work) from [] (worker_thread+0x220/0x2e4) <4>[ 2.771655] r10:c4699760 r9:c0f8fabc r8:c0e0d1a0 r7:c0edcaa0 r6:c0e0d18c r5:c4693c94 <4>[ 2.779731] r4:c4693c80 <4>[ 2.782544] [] (worker_thread) from [] (kthread+0x11c/0x128) <4>[ 2.790195] r9:c1531e98 r8:c4693c80 r7:c0134c78 r6:c46aa000 r5:c4692c80 r4:c4699740 <4>[ 2.798207] [] (kthread) from [] (ret_from_fork+0x14/0x2c) <4>[ 2.805690] Exception stack(0xc46abfb0 to 0xc46abff8) <4>[ 2.811006] bfa0: 00000000 00000000 00000000 00000000 <4>[ 2.819435] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 <4>[ 2.827878] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 <4>[ 2.834763] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0139764 <4>[ 2.842851] r4:c4692c80 r3:00000001 <4>[ 2.846681] ---[ end trace 58996bc4bee07164 ]--- <6>[ 2.851601] sdhost-bcm2835 3f202000.mmc: loaded - DMA enabled (>1) <4>[ 2.860725] dwc2 3f980000.usb: supply vusb_d not found, using dummy regulator <4>[ 2.868367] dwc2 3f980000.usb: supply vusb_a not found, using dummy regulator <6>[ 2.927023] dwc2 3f980000.usb: DWC OTG Controller <6>[ 2.932206] dwc2 3f980000.usb: new USB bus registered, assigned bus number 1 <6>[ 2.939699] dwc2 3f980000.usb: irq 33, io mem 0x3f980000 <6>[ 2.946433] hub 1-0:1.0: USB hub found <6>[ 2.950617] hub 1-0:1.0: 1 port detected <4>[ 2.956563] vc4_hdmi 3f902000.hdmi: deferred probe timeout, ignoring dependency <4>[ 2.964259] vc4_hdmi: probe of 3f902000.hdmi failed with error -110 <4>[ 2.971165] vc4_vec 3f806000.vec: deferred probe timeout, ignoring dependency <4>[ 2.978599] vc4_vec: probe of 3f806000.vec failed with error -110 <4>[ 2.985318] vc4_v3d 3fc00000.v3d: deferred probe timeout, ignoring dependency <4>[ 2.992789] vc4_v3d: probe of 3fc00000.v3d failed with error -110 <4>[ 3.000094] OF: fdt: not creating '/sys/firmware/fdt': CRC check failed <4>[ 3.032416] mmc0: host does not support reading read-only switch, assuming write-enable <6>[ 3.043000] mmc0: new high speed SDHC card at address 0002 <6>[ 3.049845] mmcblk0: mmc0:0002 NCard 14.9 GiB <6>[ 3.057444] mmcblk0: p1 <6>[ 3.330538] usb 1-1: new high-speed USB device number 2 using dwc2 <6>[ 3.581578] hub 1-1:1.0: USB hub found <6>[ 3.585697] hub 1-1:1.0: 5 ports detected <6>[ 3.910525] usb 1-1.1: new high-speed USB device number 3 using dwc2 <6>[ 4.043830] smsc95xx v2.0.0 <6>[ 4.184126] SMSC LAN8700 usb-001:003:01: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=usb-001:003:01, irq=POLL) <6>[ 4.196671] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:d2:0e:1f <6>[ 4.300532] usb 1-1.3: new high-speed USB device number 4 using dwc2 <6>[ 4.436732] usb-storage 1-1.3:1.0: USB Mass Storage device detected <6>[ 4.444320] scsi host0: usb-storage 1-1.3:1.0 <6>[ 5.124914] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup <6>[ 5.142105] smsc95xx 1-1.1:1.0 eth0: Link is Down <5>[ 5.540076] scsi 0:0:0:0: Direct-Access Kingston DT 101 G2 PMAP PQ: 0 ANSI: 0 CCS <5>[ 5.890553] random: crng init done <5>[ 6.481250] sd 0:0:0:0: [sda] 7669824 512-byte logical blocks: (3.93 GB/3.66 GiB) <5>[ 6.489472] sd 0:0:0:0: [sda] Write Protect is off <3>[ 6.494966] sd 0:0:0:0: [sda] No Caching mode page found <3>[ 6.500570] sd 0:0:0:0: [sda] Assuming drive cache: write through <6>[ 6.539539] sda: sda1 sda2 <5>[ 6.546495] sd 0:0:0:0: [sda] Attached SCSI removable disk <6>[ 7.222136] smsc95xx 1-1.1:1.0 eth0: Link is Up - 100Mbps/Full - flow control off <6>[ 7.230681] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 7.260734] Sending DHCP requests ., OK <6>[ 7.384631] IP-Config: Got DHCP answer from 192.168.101.1, my address is 192.168.101.213 <6>[ 7.393035] IP-Config: Complete: <6>[ 7.396551] device=eth0, hwaddr=b8:27:eb:d2:0e:1f, ipaddr=192.168.101.213, mask=255.255.255.0, gw=192.168.101.1 <6>[ 7.407366] host=192.168.101.213, domain=lava.cbg.collabora.co.uk, nis-domain=(none) <6>[ 7.415832] bootserver=192.168.101.1, rootserver=192.168.101.1, rootpath= <6>[ 7.415840] nameserver0=192.168.101.1 <5>[ 7.428061] cfg80211: Loading compiled-in X.509 certificates for regulatory database <5>[ 7.457963] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' <4>[ 7.465595] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 <6>[ 7.474800] cfg80211: failed to load regulatory.db <6>[ 7.479913] ALSA device list: <6>[ 7.483294] No soundcards found. <6>[ 7.487291] uart-pl011 3f201000.serial: no DMA platform data <6>[ 7.500075] Freeing unused kernel memory: 1024K <6>[ 7.505273] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 7.735524] udevd[93]: starting version 3.2.9 <27>[ 7.754541] udevd[93]: specified user 'tss' unknown <27>[ 7.760042] udevd[93]: specified group 'tss' unknown <30>[ 7.771333] udevd[94]: starting eudev-3.2.9 <4>[ 8.128070] vchiq: module is from the staging directory, the quality is unknown, you have been warned. <6>[ 8.176332] bcm2835-rng 3f104000.rng: hwrng registered <3>[ 8.274395] bcm2835_vchiq 3f00b840.mailbox: failed to set channelbase <6>[ 8.281233] vchiq: could not load vchiq done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-9097589/environment . /lava-9097589/environment / # /lava-9097589/bin/lava-test-runner /lava-9097589/0 /lava-9097589/bin/lava-test-runner /lava-9097589/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-9097589/0/tests/0_dmesg + cat uuid + UUID=9097589_1.5.2<8>[ 9.541563] .4.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 9.606856] <8>[ 9.667419] <8>[ 9.727866] + set +x <8>[ 9.738948] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-9097589/environment / # . /lava-9097589/environment/lava-9097589/bin/lava-test-runner /lava-9097589/1 / # /lava-9097589/bin/lava-test-runner /lava-9097589/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-9097589/1/tests/1_bootrr + cat uuid + UUID=9097589_1.5.2<8>[ 10.263597] .4.5 + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-9097589/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-9097589/1/../bin/lava-test-case <8>[ 10.337491] /lava-9097589/1/../bin/lava-test-case <8>[ 10.393116] /lava-9097589/1/../bin/lava-test-case <8>[ 10.425812] + set +x <8>[ 10.451477] / #