Trying 127.0.0.1...
Connected to 127.0.0.1.
Escape character is '^]'.

ser2net port 3021 device /dev/ttyimx6sll-evk-1 [115200 N81] (Debian GNU/Linux)

 

U-Boot 2016.03-imx_v2016.03_4.1.15_2.0.0_ga+ga57b13b (May 10 2017 - 04:58:24 -0500)

CPU:   Freescale i.MX6SLL rev1.1 996 MHz (running at 792 MHz)
CPU:   Commercial temperature grade (0C to 95C) at 32C
Reset cause: POR
Board: MX6SLL EVK
I2C:   ready
DRAM:  2 GiB
PMIC: PFUZE100! DEV_ID=0x10 REV_ID=0x21
MMC:   FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
*** Warning - bad CRC, using default environment

No panel detected: default to MCIMX28LCD
Display: MCIMX28LCD (800x480)
Video: 800x480x24
In:    serial
Out:   serial
Err:   serial
switch to partitions #0, OK
mmc0 is current device
Net:   CPU Net Initialization Failed
No ethernet found.
Normal Boot
Hit any key to stop autoboot:  3 
 0 
=> usb start
usb start
starting USB...
USB0:   Port not available.
USB1:   USB EHCI 1.00
scanning bus 1 for devices... 1 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
       scanning usb for ethernet devices... 0 Ethernet Device(s) found
=> setenv autoload no
setenv autoload no
=> setenv initrd_high 0xffffffff
setenv initrd_high 0xffffffff
=> setenv fdt_high 0xffffffff
setenv fdt_high 0xffffffff
=> dhcp
dhcp
No ethernet found.
=> setenv serverip 59.144.98.45
setenv serverip 59.144.98.45
=> tftp 0x80800000 1155947/tftp-deploy-da6lhxj8/kernel/zImage
tftp 0x80800000 1155947/tftp-deploy-da6lhxj8/kernel/zImage
No ethernet found.
=> tftp 0x86800000 1155947/tftp-deploy-da6lhxj8/ramdisk/ramdisk.cpio.gz.uboot
tftp 0x86800000 1155947/tftp-deploy-da6lhxj8/ramdisk/ramdisk.cpio.gz.uboot
No ethernet found.
=> setenv initrd_size ${filesize}
setenv initrd_size ${filesize}
=> tftp 0x83000000 1155947/tftp-deploy-da6lhxj8/dtb/imx6sll-evk.dtb
tftp 0x83000000 1155947/tftp-deploy-da6lhxj8/dtb/imx6sll-evk.dtb
No ethernet found.
=> setenv bootargs 'console=ttymxc0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp'
setenv bootargs 'console=ttymxc0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp'
=> bootz 0x80800000 0x86800000 0x83000000
bootz 0x80800000 0x86800000 0x83000000
Bad Linux ARM zImage magic!
=>