connecting to NetworkSerialPort(target=Target(name='imx6dl-riotboard-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4011, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4011 connected to 10.8.254.5 (port 4011) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2023.01.0 #1 Fri Jan 27 16:21:21 CET 2023 Board: RIoTboard i.MX6S detected i.MX6 Solo revision 1.1 i.MX6 Solo unique ID: 132c61d4d72d78a9 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2194000.mmc@2194000.of: registered as mmc1 imx-esdhc 2198000.mmc@2198000.of: registered as mmc2 imx-esdhc 219c000.mmc@219c000.of: registered as mmc3 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-hdmi 120000.hdmi@120000.of: Detected HDMI controller 0x13:0x1a:0xa0:0xc1 netconsole: registered as netconsole-1 malloc space: 0x2fe7b320 -> 0x4fcf663f (size 510.5 MiB) mmc3: detected MMC card version 4.41 mmc3: registered mmc3.boot0 mmc3: registered mmc3.boot1 mmc3: registered mmc3 [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mRIoTboard i.MX6S:/[0m bootm -v -r /mnt/tftp/902898/tftp-deploy-vsn93618/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/902898/tftp-deploy-vsn93618/dtb/imx6dl-riotboard.dtb /mnt/tftp/902898/tftp-deploy-vsn93618/kernel/zImage [1;32mbarebox@[1;36mRIoTboard i.MX6S:/[0m bootm -v -r /mnt/tftp/902898/tftp-deploy-vsn93618/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/902898/tftp-deploy-vsn93618/dtb/imx6dl-riotboard.dtb /mnt/tftp/902898/tftp-deploy-vsn93618/kernel/zImage [1;33mWARNING:[0m eth0: No MAC address set. Using random address a2:04:59:b3:87:af eth0: 1000Mbps full duplex link detected T eth0: DHCP client bound to address 10.8.254.112 Loading ARM Linux zImage '/mnt/tftp/902898/tftp-deploy-vsn93618/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x13248000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/902898/tftp-deploy-vsn93618/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x189b63c6 Loading devicetree from '/mnt/tftp/902898/tftp-deploy-vsn93618/dtb/imx6dl-riotboard.dtb' commandline: console=ttymxc1,115200n8 Starting kernel at 0x13248000, initrd at 0x18000000, oftree at 0x189b7000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.167-cip26 (KernelCI@build-j1016867-arm-gcc-10-imx-v6-v7-defconfig-hrl7x) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Fri Feb 10 10:11:40 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: RIoTboard i.MX6S [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 64 MiB at 0x4a000000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000010000000-0x000000003fffffff] [ 0.000000] HighMem [mem 0x0000000040000000-0x000000004fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000010000000-0x000000004fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000004fffffff] [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] percpu: Embedded 20 pages/cpu s51948 r8192 d21780 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260608 [ 0.000000] Kernel command line: console=ttymxc1,115200n8 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 932504K/1048576K available (14336K kernel code, 2024K rwdata, 4848K rodata, 1024K init, 6663K bss, 50536K reserved, 65536K cma-reserved, 195512K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Running RCU self tests [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU lockdep checking is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 512 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76450001 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000008] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000039] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.001835] Console: colour dummy device 80x30 [ 0.001887] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001910] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001931] ... MAX_LOCK_DEPTH: 48 [ 0.001953] ... MAX_LOCKDEP_KEYS: 8192 [ 0.001974] ... CLASSHASH_SIZE: 4096 [ 0.001995] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.002015] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.002037] ... CHAINHASH_SIZE: 32768 [ 0.002059] memory used by lock dependency info: 4061 kB [ 0.002078] memory used for stack traces: 2112 kB [ 0.002099] per task-struct memory footprint: 1536 bytes [ 0.002225] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.002272] pid_max: default: 32768 minimum: 301 [ 0.002659] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.002704] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.006286] CPU: Testing write buffer coherency: ok [ 0.006428] CPU0: Spectre v2: using BPIALL workaround [ 0.007405] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.010651] Setting up static identity map for 0x10100000 - 0x10100078 [ 0.011426] rcu: Hierarchical SRCU implementation. [ 0.013443] smp: Bringing up secondary CPUs ... [ 0.013484] smp: Brought up 1 node, 1 CPU [ 0.013517] SMP: Total of 1 processors activated (6.00 BogoMIPS). [ 0.013548] CPU: All CPU(s) started in SVC mode. [ 0.016341] devtmpfs: initialized [ 0.057108] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.058442] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.058523] futex hash table entries: 256 (order: 2, 16384 bytes, linear) [ 0.061456] pinctrl core: initialized pinctrl subsystem [ 0.068263] NET: Registered protocol family 16 [ 0.099829] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.106027] thermal_sys: Registered thermal governor 'step_wise' [ 0.106367] cpuidle: using governor menu [ 0.106537] CPU identified as i.MX6DL, silicon rev 1.1 [ 0.613756] vdd1p1: supplied by regulator-dummy [ 0.637341] vdd3p0: supplied by regulator-dummy [ 0.660649] vdd2p5: supplied by regulator-dummy [ 0.683716] vddarm: supplied by regulator-dummy [ 0.707616] vddpu: supplied by regulator-dummy [ 0.730026] vddsoc: supplied by regulator-dummy [ 1.578625] No ATAGs? [ 1.579013] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 1.579113] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 1.585849] imx6dl-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver [ 1.721590] vgaarb: loaded [ 1.724002] SCSI subsystem initialized [ 1.725903] usbcore: registered new interface driver usbfs [ 1.726235] usbcore: registered new interface driver hub [ 1.726417] usbcore: registered new device driver usb [ 1.726890] usb_phy_generic usbphynop1: supply vcc not found, using dummy regulator [ 1.727810] usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests [ 1.728324] usb_phy_generic usbphynop2: supply vcc not found, using dummy regulator [ 1.729100] usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests [ 1.736440] i2c i2c-0: IMX I2C adapter registered [ 1.741425] i2c i2c-1: IMX I2C adapter registered [ 1.743460] i2c i2c-3: IMX I2C adapter registered [ 1.744104] mc: Linux media interface: v0.10 [ 1.744271] videodev: Linux video capture interface: v2.00 [ 1.744976] pps_core: LinuxPPS API ver. 1 registered [ 1.745011] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.745108] PTP clock support registered [ 1.747116] Advanced Linux Sound Architecture Driver Initialized. [ 1.756157] Bluetooth: Core ver 2.22 [ 1.756336] NET: Registered protocol family 31 [ 1.756370] Bluetooth: HCI device and connection manager initialized [ 1.756518] Bluetooth: HCI socket layer initialized [ 1.756572] Bluetooth: L2CAP socket layer initialized [ 1.756767] Bluetooth: SCO socket layer initialized [ 1.760902] clocksource: Switched to clocksource mxc_timer1 [ 3.354905] VFS: Disk quotas dquot_6.6.0 [ 3.355122] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 3.392096] NET: Registered protocol family 2 [ 3.392790] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 3.396266] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 22528 bytes, linear) [ 3.396430] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 3.396613] TCP bind hash table entries: 8192 (order: 6, 327680 bytes, linear) [ 3.397773] TCP: Hash tables configured (established 8192 bind 8192) [ 3.398440] UDP hash table entries: 512 (order: 3, 49152 bytes, linear) [ 3.398666] UDP-Lite hash table entries: 512 (order: 3, 49152 bytes, linear) [ 3.399329] NET: Registered protocol family 1 [ 3.402876] RPC: Registered named UNIX socket transport module. [ 3.402990] RPC: Registered udp transport module. [ 3.403026] RPC: Registered tcp transport module. [ 3.403061] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 3.405006] PCI: CLS 0 bytes, default 64 [ 3.406756] Trying to unpack rootfs image as initramfs... [ 4.685592] Freeing initrd memory: 9948K [ 4.688201] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 4.695060] Initialise system trusted keyrings [ 4.696046] workingset: timestamp_bits=30 max_order=18 bucket_order=0 [ 4.725149] NFS: Registering the id_resolver key type [ 4.725385] Key type id_resolver registered [ 4.725502] Key type id_legacy registered [ 4.725912] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 4.726037] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 4.726248] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 4.728493] fuse: init (API version 7.32) [ 4.826786] Key type asymmetric registered [ 4.826986] Asymmetric key parser 'x509' registered [ 4.827374] bounce: pool size: 64 pages [ 4.827539] io scheduler mq-deadline registered [ 4.827579] io scheduler kyber registered [ 4.860196] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 4.860328] imx-sdma 20ec000.sdma: Falling back to sysfs fallback for: imx/sdma/sdma-imx6q.bin [ 4.867616] mxs-dma 110000.dma-apbh: initialized [ 4.882386] pfuze100-regulator 0-0008: Full layer: 1, Metal layer: 1 [ 4.883385] pfuze100-regulator 0-0008: FAB: 0, FIN: 0 [ 4.883424] pfuze100-regulator 0-0008: pfuze100 found. [ 4.919814] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 32, base_baud = 5000000) is a IMX [ 4.925913] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 75, base_baud = 5000000) is a IMX [ 5.816500] printk: console [ttymxc1] enabled [ 5.825165] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 76, base_baud = 5000000) is a IMX [ 5.837856] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 77, base_baud = 5000000) is a IMX [ 5.850509] 21f4000.serial: ttymxc4 at MMIO 0x21f4000 (irq = 78, base_baud = 5000000) is a IMX [ 5.897684] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops) [ 5.904714] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops) [ 5.910338] etnaviv-gpu 130000.gpu: model: GC880, revision: 5106 [ 5.917398] etnaviv-gpu 134000.gpu: model: GC320, revision: 5007 [ 5.927122] [drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor 0 [ 5.946515] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_crtc_ops) [ 5.954624] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_crtc_ops) [ 5.963504] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.31a with HDCP (DWC HDMI 3D TX PHY) [ 5.981052] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops) [ 5.991873] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1 [ 6.001777] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 6.009989] imx-ipuv3 2400000.ipu: IPUv3H probed [ 6.056494] brd: module loaded [ 6.102636] loop: module loaded [ 6.121985] CAN device driver interface [ 6.132149] pps pps0: new PPS source ptp0 [ 6.201789] fec 2188000.ethernet eth0: registered PHC device 0 [ 6.212047] usbcore: registered new interface driver r8152 [ 6.217714] usbcore: registered new interface driver lan78xx [ 6.223775] usbcore: registered new interface driver asix [ 6.229341] usbcore: registered new interface driver ax88179_178a [ 6.235696] usbcore: registered new interface driver cdc_ether [ 6.241815] usbcore: registered new interface driver smsc95xx [ 6.247729] usbcore: registered new interface driver net1080 [ 6.253644] usbcore: registered new interface driver cdc_subset [ 6.259729] usbcore: registered new interface driver zaurus [ 6.265533] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 6.273233] usbcore: registered new interface driver cdc_ncm [ 6.278924] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 6.285542] ehci-pci: EHCI PCI platform driver [ 6.290149] ehci-mxc: Freescale On-Chip EHCI Host driver [ 6.296844] usbcore: registered new interface driver usb-storage [ 6.326460] snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc0 [ 6.332925] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01T00:00:00 UTC (0) [ 6.342530] i2c /dev entries driver [ 6.363208] Bluetooth: HCI UART driver ver 2.3 [ 6.367695] Bluetooth: HCI UART protocol H4 registered [ 6.373051] Bluetooth: HCI UART protocol LL registered [ 6.382217] sdhci: Secure Digital Host Controller Interface driver [ 6.388430] sdhci: Copyright(c) Pierre Ossman [ 6.392890] sdhci-pltfm: SDHCI platform and OF driver helper [ 6.402648] sdhci-esdhc-imx 2194000.mmc: Got CD GPIO [ 6.407884] sdhci-esdhc-imx 2194000.mmc: Got WP GPIO [ 6.419598] sdhci-esdhc-imx 2198000.mmc: Got CD GPIO [ 6.432010] sdhci-esdhc-imx 2198000.mmc: Got WP GPIO [ 6.440497] caam 2100000.crypto: Entropy delay = 3200 [ 6.506500] caam 2100000.crypto: Instantiated RNG4 SH0 [ 6.567253] caam 2100000.crypto: Instantiated RNG4 SH1 [ 6.575903] caam 2100000.crypto: device ID = 0x0a16010000000100 (Era 4) [ 6.582748] caam 2100000.crypto: job rings = 2, qi = 0 [ 6.601238] mmc3: SDHCI controller on 219c000.mmc [219c000.mmc] using ADMA [ 6.614243] mmc2: SDHCI controller on 2198000.mmc [2198000.mmc] using ADMA [ 6.623380] mmc1: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA [ 6.659560] caam algorithms registered in /proc/crypto [ 6.673613] caam 2100000.crypto: registering rng-caam [ 6.687329] usbcore: registered new interface driver usbhid [ 6.693333] usbhid: USB HID core driver [ 6.702796] ipu1_csi0: Registered ipu1_csi0 capture as /dev/video0 [ 6.711010] ipu1_ic_prpenc: Registered ipu1_ic_prpenc capture as /dev/video1 [ 6.719959] ipu1_ic_prpvf: Registered ipu1_ic_prpvf capture as /dev/video2 [ 6.729267] ipu1_csi1: Registered ipu1_csi1 capture as /dev/video3 [ 6.736965] mmc3: new DDR MMC card at address 0001 [ 6.755038] mmcblk3: mmc3:0001 MMC04G 3.58 GiB [ 6.760747] mmcblk3boot0: mmc3:0001 MMC04G partition 1 2.00 MiB [ 6.779670] mmcblk3boot1: mmc3:0001 MMC04G partition 2 2.00 MiB [ 6.788786] sgtl5000 0-000a: sgtl5000 revision 0x11 [ 6.794318] mmcblk3rpmb: mmc3:0001 MMC04G partition 3 128 KiB, chardev (243:0) [ 6.809492] sgtl5000 0-000a: Using internal LDO instead of VDDD: check ER1 erratum [ 6.862113] random: crng init done [ 6.886018] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 6.951318] NET: Registered protocol family 10 [ 6.960891] Segment Routing with IPv6 [ 6.964741] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 6.973590] NET: Registered protocol family 17 [ 6.978117] can: controller area network core [ 6.983007] NET: Registered protocol family 29 [ 6.987491] can: raw protocol [ 6.990655] can: broadcast manager protocol [ 6.995108] can: netlink gateway - max_hops=1 [ 7.000154] Key type dns_resolver registered [ 7.016911] Registering SWP/SWPB emulation handler [ 7.025839] Loading compiled-in X.509 certificates [ 7.195023] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 7.200476] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 7.230959] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 7.238005] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 7.246550] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.253859] usb usb1: Product: EHCI Host Controller [ 7.258764] usb usb1: Manufacturer: Linux 5.10.167-cip26 ehci_hcd [ 7.264935] usb usb1: SerialNumber: ci_hdrc.1 [ 7.273987] hub 1-0:1.0: USB hub found [ 7.278130] hub 1-0:1.0: 1 port detected [ 7.298307] imx-media: Registered ipu_ic_pp csc/scaler as /dev/video4 [ 7.309083] imx_thermal 20c8000.anatop:tempmon: Commercial CPU temperature grade - max:95C critical:90C passive:85C [ 7.329144] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 7.388397] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 7.397559] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 7.406386] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db [ 7.414364] ALSA device list: [ 7.417364] #0: imx6-riotboard-sgtl5000 [ 7.425737] Freeing unused kernel memory: 1024K [ 7.443248] Run /init as init process [ 7.581216] usb 1-1: new high-speed USB device number 2 using ci_hdrc Starting syslogd: OK Starting klogd: OK Running sysctl: [ 7.793374] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.00 [ 7.801859] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 7.809090] usb 1-1: Product: USB 2.0 Hub [MTT] OK [ 7.875114] hub 1-1:1.0: USB hub found [ 7.882176] hub 1-1:1.0: 4 ports detected Populating /dev using udev: [ 7.918492] udevd[181]: starting version 3.2.9 [ 7.939371] udevd[181]: specified user 'tss' unknown [ 7.945122] udevd[181]: specified group 'tss' unknown [ 7.971342] udevd[182]: starting eudev-3.2.9 [ 9.685685] coda 2040000.vpu: Direct firmware load for vpu_fw_imx6d.bin failed with error -2 [ 9.694358] coda 2040000.vpu: Falling back to sysfs fallback for: vpu_fw_imx6d.bin done Saving random seed: OK Starting network: OK Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-902898/environment . /lava-902898/environment / # /lava-902898/bin/lava-test-runner /lava-902898/0 /lava-902898/bin/lava-test-runner /lava-902898/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-902898/0/tests/0_dmesg + cat uuid + UUID=902898_1.5.2.3.1[ 12.078880] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 12.188330] [ 12.284294] [ 12.379962] + set +x [ 12.391680] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-902898/environment / # . /lava-902898/environment/lava-902898/bin/lava-test-runner /lava-902898/1 / # /lava-902898/bin/lava-test-runner /lava-902898/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-902898/1/tests/1_bootrr + cat uuid + UUID=902898_1.5.2.3.5[ 12.999299] + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-902898/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-902898/1/../bin/lava-test-case [ 13.131943] /lava-902898/1/../bin/lava-test-case [ 13.223078] /lava-902898/1/../bin/lava-test-case [ 13.274601] + set +x [ 13.311710] / #