[Enter `^Ec?' for help] U-Boot 2016.03-rc1-00131-g39af3d8-dirty (Feb 09 2016 - 16:39:49 +0000) DRAM: 944 MiB WARNING: Caches not enabled RPI Model B+ (0x10) MMC: bcm2835_sdhci: 0 reading uboot.env In: serial Out: lcd Err: lcd Net: Net Initialization Skipped No ethernet found. starting USB... USB0: Core Release: 2.80a scanning bus 0 for devices... 4 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found Hit any key to stop autoboot: 2  0 U-Boot> usb start usb start U-Boot> setenv autoload no setenv autoload no U-Boot> setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff U-Boot> setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff U-Boot> dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.101.211 (364 ms) U-Boot> setenv serverip 192.168.101.1 setenv serverip 192.168.101.1 U-Boot> tftp 0x01000000 9726608/tftp-deploy-s6313uyr/kernel/zImage tftp 0x01000000 9726608/tftp-deploy-s6313uyr/kernel/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.101.1; our IP address is 192.168.101.211 Filename '9726608/tftp-deploy-s6313uyr/kernel/zImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ###### 482.4 KiB/s done Bytes transferred = 5805888 (589740 hex) U-Boot> tftp 0x02200000 9726608/tftp-deploy-s6313uyr/ramdisk/ramdisk.cpio.gz.uboot tftp 0x02200000 9726608/tftp-deploy-s6313uyr/ramdisk/ramdisk.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.101.1; our IP address is 192.168.101.211 Filename '9726608/tftp-deploy-s6313uyr/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x2200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################## 823.2 KiB/s done Bytes transferred = 9259480 (8d49d8 hex) U-Boot> setenv initrd_size ${filesize} setenv initrd_size ${filesize} U-Boot> tftp 0x00000100 9726608/tftp-deploy-s6313uyr/dtb/bcm2836-rpi-2-b.dtb tftp 0x00000100 9726608/tftp-deploy-s6313uyr/dtb/bcm2836-rpi-2-b.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.101.1; our IP address is 192.168.101.211 Filename '9726608/tftp-deploy-s6313uyr/dtb/bcm2836-rpi-2-b.dtb'. Load address: 0x100 Loading: *# 635.7 KiB/s done Bytes transferred = 13687 (3577 hex) U-Boot> setenv bootargs 'console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' setenv bootargs 'console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' U-Boot> bootz 0x01000000 0x02200000 0x00000100 bootz 0x01000000 0x02200000 0x00000100 Kernel image @ 0x1000000 [ 0x000000 - 0x589740 ] ## Loading init Ramdisk from Legacy Image at 02200000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 9259416 Bytes = 8.8 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 00000100 Booting using the fdt blob at 0x000100 reserving fdt memory region: addr=0 size=1000 Using Device Tree in place at 00000100, end 00006676 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.175-cip29 (KernelCI@build-j1225851-arm-gcc-10-bcm2835-defconfig-sht6n) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 Wed Mar 22 06:52:09 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 2 Model B [ 0.000000] earlycon: pl11 at MMIO 0x3f201000 (options '115200n8') [ 0.000000] printk: bootconsole [pl11] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Ignoring RAM at 0x30000000-0x3b000000 [ 0.000000] Consider using a HIGHMEM enabled kernel. [ 0.000000] Reserved memory: created CMA memory pool at 0x2c000000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm/kernel/devtree.c:148 arm_dt_init_cpu_maps+0x1b8/0x200 [ 0.000000] DT /cpu 2 nodes greater than max cores 1, capping them [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.10.175-cip29 #1 [ 0.000000] Hardware name: BCM2835 [ 0.000000] Backtrace: [ 0.000000] [] (dump_backtrace) from [] (show_stack+0x20/0x24) [ 0.000000] r7:c0e01edc r6:00000000 r5:00000009 r4:c0bbd98f [ 0.000000] [] (show_stack) from [] (dump_stack+0x28/0x30) [ 0.000000] [] (dump_stack) from [] (__warn+0x9c/0xdc) [ 0.000000] r5:00000009 r4:c0b34780 [ 0.000000] [] (__warn) from [] (warn_slowpath_fmt+0x88/0xcc) [ 0.000000] r9:c0f75a08 r8:c0b347f9 r7:00000009 r6:c0d04d08 r5:00000094 r4:c0b34780 [ 0.000000] [] (warn_slowpath_fmt) from [] (arm_dt_init_cpu_maps+0x1b8/0x200) [ 0.000000] r8:c0b3472d r7:00000000 r6:ff000000 r5:00000000 r4:eb9d96c4 [ 0.000000] [] (arm_dt_init_cpu_maps) from [] (setup_arch+0x26c/0x644) [ 0.000000] r10:c0e01f70 r9:c0e01f68 r8:ebffff00 r7:c0bcb0c8 r6:2fffffff r5:c0e08738 [ 0.000000] r4:c0d34020 [ 0.000000] [] (setup_arch) from [] (start_kernel+0x64/0x520) [ 0.000000] r10:10c53c7d r9:410fc075 r8:00000100 r7:c0f8f03c r6:c0e04240 r5:00000051 [ 0.000000] r4:c0d004b0 [ 0.000000] [] (start_kernel) from [<00000000>] (0x0) [ 0.000000] r9:410fc075 r8:00000100 r7:00000000 r6:10c03c7d r5:00000051 r4:c0d004b0 [ 0.000000] ---[ end trace 58996bc4bee07162 ]--- [ 0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 195072 [ 0.000000] Kernel command line: console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 689064K/786432K available (8192K kernel code, 1595K rwdata, 3248K rodata, 1024K init, 709K bss, 31832K reserved, 65536K cma-reserved) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 <6>[ 0.000000] ftrace: allocating 32688 entries in 96 pages <6>[ 0.000000] ftrace: allocated 96 pages with 2 groups <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <3>[ 0.000000] [Firmware Bug]: Bootloader left irq enabled: bank 1 irq 9 <6>[ 0.000019] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns <6>[ 0.008818] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns <6>[ 0.018641] bcm2835: system timer (irq = 27) <6>[ 0.023752] arch_timer: cp15 timer(s) running at 19.20MHz (virt). <6>[ 0.030243] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns <6>[ 0.041516] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns <6>[ 0.049948] Switching to timer-based delay loop, resolution 52ns <6>[ 0.056762] Console: colour dummy device 80x30 <6>[ 0.061635] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) <6>[ 0.072480] pid_max: default: 32768 minimum: 301 <6>[ 0.077841] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.085589] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.094806] CPU: Testing write buffer coherency: ok <6>[ 0.101172] Setting up static identity map for 0x100000 - 0x100054 <6>[ 0.109435] devtmpfs: initialized <6>[ 0.119490] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 <6>[ 0.127914] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.138240] futex hash table entries: 256 (order: -1, 3072 bytes, linear) <6>[ 0.148688] pinctrl core: initialized pinctrl subsystem <6>[ 0.156299] NET: Registered protocol family 16 <6>[ 0.163261] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.174020] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.174499] No ATAGs? <6>[ 0.183532] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. <6>[ 0.191964] hw-breakpoint: maximum watchpoint size is 8 bytes. <6>[ 0.198516] Serial: AMBA PL011 UART driver <6>[ 0.224032] Kprobes globally optimized <5>[ 0.233459] SCSI subsystem initialized <6>[ 0.237890] usbcore: registered new interface driver usbfs <6>[ 0.243899] usbcore: registered new interface driver hub <6>[ 0.249639] usbcore: registered new device driver usb <4>[ 0.255313] usb_phy_generic phy: supply vcc not found, using dummy regulator <4>[ 0.262963] usb_phy_generic phy: dummy supplies not allowed for exclusive requests <6>[ 0.271237] mc: Linux media interface: v0.10 <6>[ 0.275905] videodev: Linux video capture interface: v2.00 <6>[ 0.282058] Advanced Linux Sound Architecture Driver Initialized. <6>[ 0.289293] Bluetooth: Core ver 2.22 <6>[ 0.293307] NET: Registered protocol family 31 <6>[ 0.298103] Bluetooth: HCI device and connection manager initialized <6>[ 0.304870] Bluetooth: HCI socket layer initialized <6>[ 0.310108] Bluetooth: L2CAP socket layer initialized <6>[ 0.315550] Bluetooth: SCO socket layer initialized <6>[ 0.321348] clocksource: Switched to clocksource arch_sys_counter <6>[ 0.571752] simple-framebuffer 3b006000.framebuffer: framebuffer at 0x3b006000, 0x85400 bytes, mapped to 0x(ptrval) <6>[ 0.582714] simple-framebuffer 3b006000.framebuffer: format=r5g6b5, mode=656x416x16, linelength=1312 <6>[ 0.596102] Console: switching to colour frame buffer device 82x26 <6>[ 0.605705] simple-framebuffer 3b006000.framebuffer: fb0: simplefb registered! <6>[ 0.623463] NET: Registered protocol family 2 <6>[ 0.628673] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 0.638103] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) <6>[ 0.647000] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 0.655258] TCP bind hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 0.662899] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 0.669884] UDP hash table entries: 512 (order: 1, 8192 bytes, linear) <6>[ 0.676853] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes, linear) <6>[ 0.684452] NET: Registered protocol family 1 <6>[ 0.689940] RPC: Registered named UNIX socket transport module. <6>[ 0.696279] RPC: Registered udp transport module. <6>[ 0.701355] RPC: Registered tcp transport module. <6>[ 0.706415] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.715221] Unpacking initramfs... <6>[ 1.514229] Freeing initrd memory: 9044K <6>[ 1.519710] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available <5>[ 1.529855] Initialise system trusted keyrings <6>[ 1.535061] workingset: timestamp_bits=30 max_order=18 bucket_order=0 <6>[ 1.552629] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). <5>[ 1.680454] Key type asymmetric registered <5>[ 1.685060] Asymmetric key parser 'x509' registered <6>[ 1.690375] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) <6>[ 1.698207] io scheduler mq-deadline registered <6>[ 1.703102] io scheduler kyber registered <6>[ 1.716013] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled <6>[ 1.728222] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver <6>[ 1.739629] usbcore: registered new interface driver zd1211rw <6>[ 1.745912] usbcore: registered new interface driver lan78xx <6>[ 1.752032] usbcore: registered new interface driver asix <6>[ 1.757862] usbcore: registered new interface driver ax88179_178a <6>[ 1.764406] usbcore: registered new interface driver cdc_ether <6>[ 1.770699] usbcore: registered new interface driver smsc95xx <6>[ 1.776891] usbcore: registered new interface driver net1080 <6>[ 1.783039] usbcore: registered new interface driver cdc_subset <6>[ 1.789387] usbcore: registered new interface driver zaurus <6>[ 1.795448] usbcore: registered new interface driver cdc_ncm <6>[ 1.802132] usbcore: registered new interface driver usb-storage <6>[ 1.808721] i2c /dev entries driver <4>[ 1.814972] i2c-bcm2835 3f805000.i2c: Could not read clock-frequency property <6>[ 1.824453] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer <6>[ 1.831685] sdhci: Secure Digital Host Controller Interface driver <6>[ 1.838253] sdhci: Copyright(c) Pierre Ossman <6>[ 1.843292] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 1.850166] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 1.857700] usbcore: registered new interface driver usbhid <6>[ 1.863685] usbhid: USB HID core driver <6>[ 1.868023] bcm2835-mbox 3f00b880.mailbox: mailbox enabled <6>[ 1.876053] NET: Registered protocol family 10 <6>[ 1.882279] Segment Routing with IPv6 <6>[ 1.886409] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 1.893658] NET: Registered protocol family 17 <6>[ 1.899012] oprofile: using timer interrupt. <5>[ 1.904108] Loading compiled-in X.509 certificates <6>[ 1.915733] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 81, base_baud = 0) is a PL011 rev2 <6>[ 1.925254] printk: console [ttyAMA0] enabled <6>[ 1.925254] printk: console [ttyAMA0] enabled <6>[ 1.934598] printk: bootconsole [pl11] disabled <6>[ 1.934598] printk: bootconsole [pl11] disabled <6>[ 1.948066] raspberrypi-firmware soc:firmware: Attached to firmware from 2014-12-19T18:44:06 <4>[ 1.959752] ------------[ cut here ]------------ <4>[ 1.964714] WARNING: CPU: 0 PID: 44 at drivers/cpufreq/cpufreq-dt.c:79 dt_cpufreq_probe+0xf8/0x2f0 <4>[ 1.973937] Modules linked in: <4>[ 1.977264] CPU: 0 PID: 44 Comm: kworker/0:2 Tainted: G W 5.10.175-cip29 #1 <4>[ 1.985796] Hardware name: BCM2835 <4>[ 1.989473] Workqueue: events deferred_probe_work_func <4>[ 1.994879] Backtrace: <4>[ 1.997607] [] (dump_backtrace) from [] (show_stack+0x20/0x24) <4>[ 2.005441] r7:00000000 r6:00000000 r5:00000009 r4:c0bbd98f <4>[ 2.011372] [] (show_stack) from [] (dump_stack+0x28/0x30) <4>[ 2.018858] [] (dump_stack) from [] (__warn+0x9c/0xdc) <4>[ 2.025995] r5:00000009 r4:c0ba6517 <4>[ 2.029834] [] (__warn) from [] (warn_slowpath_fmt+0x88/0xcc) <4>[ 2.037583] r9:c470bbc8 r8:00000000 r7:00000009 r6:c062dc4c r5:0000004f r4:c0ba6517 <4>[ 2.045593] [] (warn_slowpath_fmt) from [] (dt_cpufreq_probe+0xf8/0x2f0) <4>[ 2.054295] r8:00000000 r7:c470aa10 r6:c470bbc0 r5:c0e08868 r4:00000000 <4>[ 2.061256] [] (dt_cpufreq_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.069971] r10:00000003 r9:c103178c r8:00000000 r7:c1031784 r6:c0f35e24 r5:c470aa10 <4>[ 2.078059] r4:00000000 <4>[ 2.080859] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.089385] r7:c1031784 r6:c0f35e24 r5:00000000 r4:c470aa10 <4>[ 2.095320] [] (really_probe) from [] (driver_probe_device+0x19c/0x1c8) <4>[ 2.103937] r10:00000003 r9:00000000 r8:c0f25548 r7:c470aa10 r6:c46bd7fc r5:c0f35e24 <4>[ 2.112028] r4:c470aa10 <4>[ 2.114828] [] (driver_probe_device) from [] (__device_attach_driver+0xb8/0xf8) <4>[ 2.124137] r9:00000000 r8:c0f25548 r7:c470aa10 r6:c46bd7fc r5:c0f35e24 r4:00000001 <4>[ 2.132148] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.141182] r7:c470aa54 r6:c051d1a0 r5:c46bd7fc r4:00000000 <4>[ 2.147113] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.155638] r6:c470aa10 r5:00000001 r4:c470aa10 <4>[ 2.160517] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.169303] r7:00000000 r6:c470aa10 r5:c0f254f0 r4:c470aa10 <4>[ 2.175252] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.184132] [] (bus_probe_device) from [] (device_add+0x5d4/0x6f8) <4>[ 2.192311] r7:00000000 r6:c0f251e8 r5:00000000 r4:c470aa10 <4>[ 2.198230] [] (device_add) from [] (platform_device_add+0x190/0x1f8) <4>[ 2.206675] r9:c0e0b434 r8:c0e0b414 r7:05f5e100 r6:00000000 r5:00000000 r4:c470aa00 <4>[ 2.214686] [] (platform_device_add) from [] (platform_device_register_full+0xf0/0x124) <4>[ 2.224690] r9:05f5e0ff r8:2faf0800 r7:05f5e100 r6:c46bd8e0 r5:00000000 r4:c470aa00 <4>[ 2.232701] [] (platform_device_register_full) from [] (raspberrypi_cpufreq_probe+0x10c/0x198) <4>[ 2.243307] r7:05f5e100 r6:c0e08868 r5:00000000 r4:00000000 <4>[ 2.249226] [] (raspberrypi_cpufreq_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.258715] r9:c103178c r8:00000000 r7:c1031784 r6:c0f35f1c r5:c470a610 r4:00000000 <4>[ 2.266726] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.275255] r7:c1031784 r6:c0f35f1c r5:00000000 r4:c470a610 <4>[ 2.281175] [] (really_probe) from [] (driver_probe_device+0x19c/0x1c8) <4>[ 2.289795] r10:c470b2c0 r9:00000000 r8:c470a410 r7:c470a610 r6:c46bda2c r5:c0f35f1c <4>[ 2.297891] r4:c470a610 <4>[ 2.300692] [] (driver_probe_device) from [] (__device_attach_driver+0xb8/0xf8) <4>[ 2.310002] r9:00000000 r8:c470a410 r7:c470a610 r6:c46bda2c r5:c0f35f1c r4:00000001 <4>[ 2.318017] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.327063] r7:c470a654 r6:c051d1a0 r5:c46bda2c r4:00000000 <4>[ 2.332994] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.341518] r6:c470a610 r5:00000001 r4:c470a610 <4>[ 2.346398] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.355183] r7:00000000 r6:c470a610 r5:c0f254f0 r4:c470a610 <4>[ 2.361103] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.369980] [] (bus_probe_device) from [] (device_add+0x5d4/0x6f8) <4>[ 2.378159] r7:00000000 r6:c0f251e8 r5:00000000 r4:c470a610 <4>[ 2.384088] [] (device_add) from [] (platform_device_add+0x190/0x1f8) <4>[ 2.392534] r9:c0e0b434 r8:c0e0b414 r7:00000000 r6:00000000 r5:00000000 r4:c470a600 <4>[ 2.400533] [] (platform_device_add) from [] (platform_device_register_full+0xf0/0x124) <4>[ 2.410536] r9:c470a410 r8:c4705150 r7:00000000 r6:c46bdb18 r5:00000000 r4:c470a600 <4>[ 2.418551] [] (platform_device_register_full) from [] (raspberrypi_clk_probe+0x160/0x31c) <4>[ 2.428814] r7:00000000 r6:00000000 r5:c470b240 r4:00000000 <4>[ 2.434746] [] (raspberrypi_clk_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.443882] r10:00000003 r9:c103178c r8:00000000 r7:c1031784 r6:c0f1f68c r5:c470a410 <4>[ 2.451968] r4:00000000 <4>[ 2.454766] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.463292] r7:c1031784 r6:c0f1f68c r5:00000000 r4:c470a410 <4>[ 2.469212] [] (really_probe) from [] (driver_probe_device+0x19c/0x1c8) <4>[ 2.477827] r10:00000003 r9:00000000 r8:c1594c10 r7:c470a410 r6:c46bdc6c r5:c0f1f68c <4>[ 2.485918] r4:c470a410 <4>[ 2.488718] [] (driver_probe_device) from [] (__device_attach_driver+0xb8/0xf8) <4>[ 2.498028] r9:00000000 r8:c1594c10 r7:c470a410 r6:c46bdc6c r5:c0f1f68c r4:00000001 <4>[ 2.506043] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.515089] r7:c470a454 r6:c051d1a0 r5:c46bdc6c r4:00000000 <4>[ 2.521009] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.529533] r6:c470a410 r5:00000001 r4:c470a410 <4>[ 2.534427] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.543214] r7:00000000 r6:c470a410 r5:c0f254f0 r4:c470a410 <4>[ 2.549133] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.558011] [] (bus_probe_device) from [] (device_add+0x5d4/0x6f8) <4>[ 2.566190] r7:00000000 r6:c0f251e8 r5:00000000 r4:c470a410 <4>[ 2.572118] [] (device_add) from [] (platform_device_add+0x190/0x1f8) <4>[ 2.580549] r9:c0e0b434 r8:c0e0b414 r7:c1594c00 r6:00000000 r5:00000000 r4:c470a400 <4>[ 2.588559] [] (platform_device_add) from [] (platform_device_register_full+0xf0/0x124) <4>[ 2.598562] r9:c103178c r8:00000001 r7:c1594c00 r6:c46bdd58 r5:00000000 r4:c470a400 <4>[ 2.606577] [] (platform_device_register_full) from [] (rpi_firmware_probe+0x1a4/0x1ec) <4>[ 2.616582] r7:c1594c00 r6:c1594c10 r5:c47092c0 r4:00000000 <4>[ 2.622512] [] (rpi_firmware_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.631388] r8:00000000 r7:c1031784 r6:c0f3783c r5:c1594c10 r4:00000000 <4>[ 2.638347] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.646875] r7:c1031784 r6:c0f3783c r5:00000000 r4:c1594c10 <4>[ 2.652808] [] (really_probe) from [] (driver_probe_device+0x19c/0x1c8) <4>[ 2.661424] r10:c0f25444 r9:00000000 r8:00000000 r7:c1594c10 r6:c46bdea4 r5:c0f3783c <4>[ 2.669500] r4:c1594c10 <4>[ 2.672311] [] (driver_probe_device) from [] (__device_attach_driver+0xb8/0xf8) <4>[ 2.681619] r9:00000000 r8:00000000 r7:c1594c10 r6:c46bdea4 r5:c0f3783c r4:00000001 <4>[ 2.689620] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.698668] r7:c1594c54 r6:c051d1a0 r5:c46bdea4 r4:00000000 <4>[ 2.704600] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.713124] r6:c1594c10 r5:00000001 r4:c1594c10 <4>[ 2.718004] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.726793] r7:eb9c7300 r6:c1594c10 r5:c0f254f0 r4:c1594c10 <4>[ 2.732725] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.741604] [] (bus_probe_device) from [] (deferred_probe_work_func+0xa8/0xcc) <4>[ 2.750812] r7:eb9c7300 r6:c0f25468 r5:c0f2542c r4:c1594c10 <4>[ 2.756747] [] (deferred_probe_work_func) from [] (process_one_work+0x194/0x274) <4>[ 2.766140] r7:eb9c7300 r6:c0e0d18c r5:c0f25440 r4:c46a1c80 <4>[ 2.772069] [] (process_one_work) from [] (worker_thread+0x220/0x2e4) <4>[ 2.780501] r10:c46a7760 r9:c0f8fabc r8:c0e0d1a0 r7:c0edcaa0 r6:c0e0d18c r5:c46a1c94 <4>[ 2.788588] r4:c46a1c80 <4>[ 2.791401] [] (worker_thread) from [] (kthread+0x11c/0x128) <4>[ 2.799052] r9:c1531e98 r8:c46a1c80 r7:c0134c84 r6:c46bc000 r5:c46a0c80 r4:c46a7740 <4>[ 2.807065] [] (kthread) from [] (ret_from_fork+0x14/0x2c) <4>[ 2.814548] Exception stack(0xc46bdfb0 to 0xc46bdff8) <4>[ 2.819855] dfa0: 00000000 00000000 00000000 00000000 <4>[ 2.828295] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 <4>[ 2.836738] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 <4>[ 2.843619] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0139770 <4>[ 2.851707] r4:c46a0c80 r3:00000001 <4>[ 2.855537] ---[ end trace 58996bc4bee07164 ]--- <6>[ 2.860448] sdhost-bcm2835 3f202000.mmc: loaded - DMA enabled (>1) <4>[ 2.869532] dwc2 3f980000.usb: supply vusb_d not found, using dummy regulator <4>[ 2.877210] dwc2 3f980000.usb: supply vusb_a not found, using dummy regulator <6>[ 2.935895] dwc2 3f980000.usb: DWC OTG Controller <6>[ 2.940901] dwc2 3f980000.usb: new USB bus registered, assigned bus number 1 <6>[ 2.948459] dwc2 3f980000.usb: irq 33, io mem 0x3f980000 <6>[ 2.955674] hub 1-0:1.0: USB hub found <6>[ 2.959858] hub 1-0:1.0: 1 port detected <4>[ 2.965817] vc4_hdmi 3f902000.hdmi: deferred probe timeout, ignoring dependency <4>[ 2.973514] vc4_hdmi: probe of 3f902000.hdmi failed with error -110 <4>[ 2.980274] vc4_vec 3f806000.vec: deferred probe timeout, ignoring dependency <4>[ 2.987773] vc4_vec: probe of 3f806000.vec failed with error -110 <4>[ 2.994488] vc4_v3d 3fc00000.v3d: deferred probe timeout, ignoring dependency <4>[ 3.001959] vc4_v3d: probe of 3fc00000.v3d failed with error -110 <4>[ 3.009264] OF: fdt: not creating '/sys/firmware/fdt': CRC check failed <4>[ 3.041648] mmc0: host does not support reading read-only switch, assuming write-enable <6>[ 3.052218] mmc0: new high speed SDHC card at address 0002 <6>[ 3.059023] mmcblk0: mmc0:0002 NCard 14.9 GiB <6>[ 3.066601] mmcblk0: p1 <6>[ 3.341377] usb 1-1: new high-speed USB device number 2 using dwc2 <6>[ 3.592438] hub 1-1:1.0: USB hub found <6>[ 3.596561] hub 1-1:1.0: 5 ports detected <6>[ 3.921374] usb 1-1.1: new high-speed USB device number 3 using dwc2 <6>[ 4.054668] smsc95xx v2.0.0 <6>[ 4.184968] SMSC LAN8700 usb-001:003:01: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=usb-001:003:01, irq=POLL) <6>[ 4.197526] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:d2:0e:1f <6>[ 4.265634] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup <6>[ 4.289070] smsc95xx 1-1.1:1.0 eth0: Link is Down <6>[ 4.301390] usb 1-1.3: new high-speed USB device number 4 using dwc2 <6>[ 4.437821] usb-storage 1-1.3:1.0: USB Mass Storage device detected <6>[ 4.445454] scsi host0: usb-storage 1-1.3:1.0 <5>[ 5.540792] scsi 0:0:0:0: Direct-Access Kingston DT 101 G2 PMAP PQ: 0 ANSI: 0 CCS <5>[ 5.891395] random: crng init done <6>[ 6.344271] smsc95xx 1-1.1:1.0 eth0: Link is Up - 100Mbps/Full - flow control off <6>[ 6.371419] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 6.401462] Sending DHCP requests ., <5>[ 6.482873] sd 0:0:0:0: [sda] 7669824 512-byte logical blocks: (3.93 GB/3.66 GiB) <5>[ 6.494948] sd 0:0:0:0: [sda] Write Protect is off <3>[ 6.500444] sd 0:0:0:0: [sda] No Caching mode page found <3>[ 6.506072] sd 0:0:0:0: [sda] Assuming drive cache: write through <4>[ 6.531381] OK <6>[ 6.533425] IP-Config: Got DHCP answer from 192.168.101.1, my address is 192.168.101.211 <6>[ 6.541827] IP-Config: Complete: <6>[ 6.545335] device=eth0, hwaddr=b8:27:eb:d2:0e:1f, ipaddr=192.168.101.211, mask=255.255.255.0, gw=192.168.101.1 <6>[ 6.556140] host=192.168.101.211, domain=lava.cbg.collabora.co.uk, nis-domain=(none) <6>[ 6.564624] bootserver=192.168.101.1, rootserver=192.168.101.1, rootpath= <6>[ 6.564632] nameserver0=192.168.101.1 <5>[ 6.577241] cfg80211: Loading compiled-in X.509 certificates for regulatory database <6>[ 6.598246] sda: sda1 sda2 <5>[ 6.609138] sd 0:0:0:0: [sda] Attached SCSI removable disk <5>[ 6.626456] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' <4>[ 6.633787] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 <6>[ 6.643015] ALSA device list: <6>[ 6.646265] No soundcards found. <6>[ 6.650259] uart-pl011 3f201000.serial: no DMA platform data <6>[ 6.656291] cfg80211: failed to load regulatory.db <6>[ 6.668250] Freeing unused kernel memory: 1024K <6>[ 6.673439] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 6.904810] udevd[93]: starting version 3.2.9 <27>[ 6.923650] udevd[93]: specified user 'tss' unknown <27>[ 6.929158] udevd[93]: specified group 'tss' unknown <30>[ 6.940349] udevd[94]: starting eudev-3.2.9 <4>[ 7.298408] vchiq: module is from the staging directory, the quality is unknown, you have been warned. <6>[ 7.348885] bcm2835-rng 3f104000.rng: hwrng registered <3>[ 7.446757] bcm2835_vchiq 3f00b840.mailbox: failed to set channelbase <6>[ 7.453562] vchiq: could not load vchiq done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-9726608/environment . /lava-9726608/environment / # /lava-9726608/bin/lava-test-runner /lava-9726608/0 /lava-9726608/bin/lava-test-runner /lava-9726608/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-9726608/0/tests/0_dmesg + cat uuid + UUID=9726608_1.5.2<8>[ 8.731725] .4.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 8.796833] <8>[ 8.857305] <8>[ 8.918074] + set +x <8>[ 8.929067] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-9726608/environment / # . /lava-9726608/environment/lava-9726608/bin/lava-test-runner /lava-9726608/1 / # /lava-9726608/bin/lava-test-runner /lava-9726608/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-9726608/1/tests/1_bootrr + cat uuid + UUID=9726608_1.5.2.4.<8>[ 9.463933] 5 + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-9726608/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-9726608/1/../bin/lava-test-case <8>[ 9.538240] /lava-9726608/1/../bin/lava-test-case <8>[ 9.592893] /lava-9726608/1/../bin/lava-test-case <8>[ 9.626008] + set +x <8>[ 9.651595] / #