connecting to NetworkSerialPort(target=Target(name='imx28-duckbill-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4014, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4014 connected to 10.8.254.5 (port 4014) Escape character: Ctrl-\ Type the escape character to get to the prompt. HTLLCLLC barebox 2020.05.0-00003-g4c4057edd6 #6 Fri May 29 14:12:02 CEST 2020 Board: I2SE Duckbill detected i.MX28 revision 1.2 mdio_bus: miibus0: probed eth0: got preset MAC address: 00:04:9f:06:00:04 mxs_mci 80010000.spi@80010000.of: registered as mci0 mci0: detected SD card version 2.0 mci0: registered disk0 malloc space: 0x43efdac0 -> 0x47dfb57f (size 63 MiB) [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mI2SE Duckbill:/[0m bootm -v -r /mnt/tftp/921686/tftp-deploy-ckgxzrev/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/921686/tftp-deploy-ckgxzrev/dtb/imx28-duckbill.dtb /mnt/tftp/921686/tftp-deploy-ckgxzrev/kernel/zImage [1;32mbarebox@[1;36mI2SE Duckbill:/[0m bootm -v -r /mnt/tftp/921686/tftp-deploy-ckgxzrev/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/921686/tftp-deploy-ckgxzrev/dtb/imx28-duckbill.dtb /mnt/tftp/921686/tftp-deploy-ckgxzrev/kernel/zImage eth0: 100Mbps full duplex link detected T eth0: DHCP client bound to address 10.8.254.53 Loading ARM Linux zImage '/mnt/tftp/921686/tftp-deploy-ckgxzrev/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x41b26000 no initrd load address, defaulting to 0x42194000 Loaded initrd GZIP compressed '/mnt/tftp/921686/tftp-deploy-ckgxzrev/ramdisk/ramdisk.cpio.gz' initrd is at 0x42194000-0x4296f08d Loading devicetree from '/mnt/tftp/921686/tftp-deploy-ckgxzrev/dtb/imx28-duckbill.dtb' commandline: console=ttyAMA0,115200n8 Starting kernel at 0x41b26000, initrd at 0x42194000, oftree at 0x42970000... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.175-cip29 (KernelCI@build-j1225852-arm-gcc-10-mxs-defconfig-klds2) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 Wed Mar 22 06:51:55 UTC 2023 [ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=0005317f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: I2SE Duckbill [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000040000000-0x0000000047ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x0000000047ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x0000000047ffffff] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: console=ttyAMA0,115200n8 [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 102948K/131072K available (8004K kernel code, 1156K rwdata, 2708K rodata, 232K init, 6466K bss, 28124K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Running RCU self tests [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] clocksource: mxs_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000045] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.002891] Console: colour dummy device 80x30 [ 0.003109] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.003205] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.003289] ... MAX_LOCK_DEPTH: 48 [ 0.003367] ... MAX_LOCKDEP_KEYS: 8192 [ 0.003445] ... CLASSHASH_SIZE: 4096 [ 0.003521] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.003599] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.003679] ... CHAINHASH_SIZE: 32768 [ 0.003758] memory used by lock dependency info: 4061 kB [ 0.003836] memory used for stack traces: 2112 kB [ 0.003915] per task-struct memory footprint: 1536 bytes [ 0.004334] Calibrating delay loop... 226.09 BogoMIPS (lpj=1130496) [ 0.081737] pid_max: default: 32768 minimum: 301 [ 0.083165] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.083335] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.096170] CPU: Testing write buffer coherency: ok [ 0.107617] Setting up static identity map for 0x40008400 - 0x40008458 [ 0.118785] devtmpfs: initialized [ 0.208162] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.208508] futex hash table entries: 256 (order: 1, 12288 bytes, linear) [ 0.210316] pinctrl core: initialized pinctrl subsystem [ 0.232675] NET: Registered protocol family 16 [ 0.237632] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.965499] Serial: AMBA PL011 UART driver [ 0.969902] 80074000.serial: ttyAMA0 at MMIO 0x80074000 (irq = 229, base_baud = 0) is a PL011 rev2 [ 1.278241] printk: console [ttyAMA0] enabled [ 1.454943] SCSI subsystem initialized [ 1.463777] usbcore: registered new interface driver usbfs [ 1.470509] usbcore: registered new interface driver hub [ 1.476765] usbcore: registered new device driver usb [ 1.488341] pps_core: LinuxPPS API ver. 1 registered [ 1.493467] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.503200] PTP clock support registered [ 1.511516] Advanced Linux Sound Architecture Driver Initialized. [ 1.531472] clocksource: Switched to clocksource mxs_timer [ 4.869764] NET: Registered protocol family 2 [ 4.876232] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 4.890066] tcp_listen_portaddr_hash hash table entries: 128 (order: 0, 5632 bytes, linear) [ 4.899267] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 4.907435] TCP bind hash table entries: 1024 (order: 3, 40960 bytes, linear) [ 4.915424] TCP: Hash tables configured (established 1024 bind 1024) [ 4.923598] UDP hash table entries: 256 (order: 2, 24576 bytes, linear) [ 4.930711] UDP-Lite hash table entries: 256 (order: 2, 24576 bytes, linear) [ 4.939964] NET: Registered protocol family 1 [ 4.954767] RPC: Registered named UNIX socket transport module. [ 4.961177] RPC: Registered udp transport module. [ 4.966304] RPC: Registered tcp transport module. [ 4.971168] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 4.984966] Unpacking initramfs... [ 8.360856] Freeing initrd memory: 8048K [ 8.380676] workingset: timestamp_bits=30 max_order=15 bucket_order=0 [ 8.526757] NFS: Registering the id_resolver key type [ 8.533883] Key type id_resolver registered [ 8.538566] Key type id_legacy registered [ 8.543814] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 8.558702] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 8.566897] io scheduler mq-deadline registered [ 8.571862] io scheduler kyber registered [ 8.605627] mxs-dma 80004000.dma-apbh: initialized [ 8.631718] mxs-dma 80024000.dma-apbx: initialized [ 8.642583] 8006a000.serial: ttyAPP0 at MMIO 0x8006a000 (irq = 228, base_baud = 1500000) is a 8006a000.serial [ 8.656242] mxs-auart 8006a000.serial: Found APPUART 3.1.0 [ 8.889262] usbcore: registered new interface driver asix [ 8.895649] usbcore: registered new interface driver ax88179_178a [ 8.902666] usbcore: registered new interface driver cdc_ether [ 8.909399] usbcore: registered new interface driver smsc95xx [ 8.916105] usbcore: registered new interface driver net1080 [ 8.922700] usbcore: registered new interface driver cdc_subset [ 8.929349] usbcore: registered new interface driver zaurus [ 8.936220] usbcore: registered new interface driver cdc_ncm [ 8.942289] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 8.949726] usbcore: registered new interface driver usb-storage [ 8.995305] stmp3xxx-rtc 80056000.rtc: registered as rtc0 [ 9.001244] stmp3xxx-rtc 80056000.rtc: setting system clock to 1970-01-01T00:00:19 UTC (19) [ 9.013131] i2c /dev entries driver [ 9.028586] stmp3xxx_rtc_wdt stmp3xxx_rtc_wdt: initialized watchdog with heartbeat 19s [ 9.104585] usbcore: registered new interface driver usbhid [ 9.110498] usbhid: USB HID core driver [ 9.115384] mxs-mmc 80010000.spi: initialized [ 9.169208] mmc0: host does not support reading read-only switch, assuming write-enable [ 9.195138] mmc0: new high speed SDHC card at address 1234 [ 9.208979] NET: Registered protocol family 17 [ 9.227140] mmcblk0: mmc0:1234 SA04G 3.64 GiB [ 9.233647] Key type dns_resolver registered [ 9.240366] registered taskstats version 1 [ 9.295738] mmcblk0: p1 [ 9.516250] ALSA device list: [ 9.519874] No soundcards found. [ 9.531031] uart-pl011 80074000.serial: no DMA platform data [ 9.538986] Freeing unused kernel memory: 232K [ 9.543824] Kernel memory protection not selected by kernel config. [ 9.550275] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: [ 10.830205] udevd[81]: starting version 3.2.9 [ 10.851267] random: udevd: uninitialized urandom read (16 bytes read) [ 10.861268] random: udevd: uninitialized urandom read (16 bytes read) [ 10.871285] random: udevd: uninitialized urandom read (16 bytes read) [ 10.944159] udevd[81]: specified user 'tss' unknown [ 10.950285] udevd[81]: specified group 'tss' unknown [ 11.005982] udevd[82]: starting eudev-3.2.9 done Saving random seed: [ 17.100280] random: dd: uninitialized urandom read (32 bytes read) OK Starting network: OK Starting dropbear sshd: [ 17.884743] random: dropbear: uninitialized urandom read (32 bytes read) OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-921686/environment . /lava-921686/environment / # /lava-921686/bin/lava-test-runner /lava-921686/0 /lava-921686/bin/lava-test-runner /lava-921686/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-921686/0/tests/0_dmesg + cat uuid + UUID=921686_1.5.2.3.1 + set +x [ 19.197373] + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 19.542913] [ 19.839951] [ 20.227298] + set +x [ 20.248485] # / # #export SHELL=/bin/sh / # export SHELL=/bin/sh. /lava-921686/environment / # . /lava-921686/environment/lava-921686/bin/lava-test-runner /lava-921686/1 / # /lava-921686/bin/lava-test-runner /lava-921686/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-921686/1/tests/1_bootrr + cat uuid + UUID=921686_1.5.2.3.5 + set +x [ 21.194151] + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-921686/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-921686/1/../bin/lava-test-case [ 21.603377] /lava-921686/1/../bin/lava-test-case [ 21.887482] /lava-921686/1/../bin/lava-test-case [ 22.038723] + set +x [ 22.147522] / #