Trying 192.168.1.205... Connected to ts5. Escape character is '^]'. ser2net port telnet,2000 device serialdev,/dev/ttyUSB-lf-bbb-01,115200n81,local [] (Debian GNU/Linux) U-Boot SPL 2021.10-nethacked-for-LAVA_hws@denx.de-dirty (Oct 19 2021 - 19:02:35 +0200) Trying to boot from MMC2 U-Boot 2021.10-nethacked-for-LAVA_hws@denx.de-dirty (Oct 19 2021 - 19:02:35 +0200) CPU : AM335X-GP rev 2.1 Model: TI AM335x BeagleBone Black DRAM: 512 MiB WDT: Started with servicing (60s timeout) NAND: 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from FAT... not set. Validating first E-fuse MAC Net: eth2: ethernet@4a100000, eth3: usb_ether Hit any key to stop autoboot: 2 0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp link up on port 0, speed 100, full duplex BOOTP broadcast 1 DHCP client bound to address 172.16.3.211 (100 ms) => setenv serverip 172.16.3.3 setenv serverip 172.16.3.3 => tftp 0x82000000 905138/tftp-deploy-w5nlksj6/kernel/zImage tftp 0x82000000 905138/tftp-deploy-w5nlksj6/kernel/zImage link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 172.16.3.3; our IP address is 172.16.3.211 Filename '905138/tftp-deploy-w5nlksj6/kernel/zImage'. Load address: 0x82000000 Loading: *################################################## 9.2 MiB 3.9 MiB/s done Bytes transferred = 9691648 (93e200 hex) => tftp 0x83000000 905138/tftp-deploy-w5nlksj6/ramdisk/ramdisk.cpio.gz.uboot tftp 0x83000000 905138/tftp-deploy-w5nlksj6/ramdisk/ramdisk.cpio.gz.uboot link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 172.16.3.3; our IP address is 172.16.3.211 Filename '905138/tftp-deploy-w5nlksj6/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x83000000 Loading: *################################################## 15.3 MiB 4.1 MiB/s done Bytes transferred = 16066487 (f527b7 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x88000000 905138/tftp-deploy-w5nlksj6/dtb/am335x-boneblack.dtb tftp 0x88000000 905138/tftp-deploy-w5nlksj6/dtb/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 172.16.3.3; our IP address is 172.16.3.211 Filename '905138/tftp-deploy-w5nlksj6/dtb/am335x-boneblack.dtb'. Load address: 0x88000000 Loading: *################################################## 61.4 KiB 5 MiB/s done Bytes transferred = 62828 (f56c hex) => setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' => bootz 0x82000000 0x83000000 0x88000000 bootz 0x82000000 0x83000000 0x88000000 Kernel image @ 0x82000000 [ 0x000000 - 0x93e200 ] ## Loading init Ramdisk from Legacy Image at 83000000 ... Image Name: Created: 2023-04-14 10:34:21 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 16066423 Bytes = 15.3 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Using Device Tree in place at 88000000, end 8801256b Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.177-cip31 (KernelCI@build-j1346584-arm-gcc-10-multi-v7-defconfig-sdm6t) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Fri Apr 14 09:44:05 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black [ 0.000000] earlycon: omap8250 at MMIO 0x44e09000 (options '') [ 0.000000] printk: bootconsole [omap8250] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x9b800000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] Normal empty [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.1 (sgx neon) [ 0.000000] percpu: Embedded 20 pages/cpu s49868 r8192 d23860 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129540 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 411880K/522240K available (13312K kernel code, 2237K rwdata, 5348K rodata, 2048K init, 426K bss, 44824K reserved, 65536K cma-reserved, 0K highmem) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=1. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts <6>[ 0.000000] TI gptimer clocksource: always-on /ocp/interconnect@44c00000/segment@200000/target-module@31000 <6>[ 0.000011] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns <6>[ 0.008338] clocksource: dmtimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns <6>[ 0.019047] TI gptimer clockevent: 24000000 Hz at /ocp/interconnect@48000000/segment@0/target-module@40000 <6>[ 0.033088] Console: colour dummy device 80x30 <3>[ 0.037952] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' <3>[ 0.044999] This ensures that you still see kernel messages. Please <3>[ 0.051718] update your kernel commandline. <6>[ 0.056321] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) <6>[ 0.096018] pid_max: default: 32768 minimum: 301 <6>[ 0.101223] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.109007] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.118007] CPU: Testing write buffer coherency: ok <6>[ 0.123395] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.129185] CPU0: thread -1, cpu 0, socket -1, mpidr 0 <6>[ 0.135497] Setting up static identity map for 0x80300000 - 0x803000ac <6>[ 0.144703] rcu: Hierarchical SRCU implementation. <6>[ 0.154602] EFI services will not be available. <6>[ 0.159779] smp: Bringing up secondary CPUs ... <6>[ 0.164707] smp: Brought up 1 node, 1 CPU <6>[ 0.169096] SMP: Total of 1 processors activated (996.14 BogoMIPS). <6>[ 0.175833] CPU: All CPU(s) started in SVC mode. <6>[ 0.181449] devtmpfs: initialized <6>[ 0.195694] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 <6>[ 0.204219] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.214647] futex hash table entries: 256 (order: 2, 16384 bytes, linear) <6>[ 0.225765] pinctrl core: initialized pinctrl subsystem <6>[ 0.234092] DMI not present or invalid. <6>[ 0.239058] NET: Registered protocol family 16 <6>[ 0.246462] DMA: preallocated 256 KiB pool for atomic coherent allocations <3>[ 0.273241] l3-aon-clkctrl:0000:0: failed to disable <6>[ 0.281430] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.281631] cpuidle: using governor menu <6>[ 1.352629] No ATAGs? <6>[ 1.355253] hw-breakpoint: debug architecture 0x4 unsupported. <6>[ 1.369927] Serial: AMBA PL011 UART driver <6>[ 1.408194] iommu: Default domain type: Translated <6>[ 1.414062] vgaarb: loaded <5>[ 1.418084] SCSI subsystem initialized <6>[ 1.422964] usbcore: registered new interface driver usbfs <6>[ 1.428920] usbcore: registered new interface driver hub <6>[ 1.434780] usbcore: registered new device driver usb <6>[ 1.442090] pps_core: LinuxPPS API ver. 1 registered <6>[ 1.447469] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 1.457194] PTP clock support registered <6>[ 1.465523] clocksource: Switched to clocksource dmtimer <6>[ 2.435977] NET: Registered protocol family 2 <6>[ 2.441000] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 2.449497] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) <6>[ 2.458424] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) <6>[ 2.466706] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) <6>[ 2.474363] TCP: Hash tables configured (established 4096 bind 4096) <6>[ 2.481286] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 2.488306] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 2.495898] NET: Registered protocol family 1 <6>[ 2.501552] RPC: Registered named UNIX socket transport module. <6>[ 2.508001] RPC: Registered udp transport module. <6>[ 2.513105] RPC: Registered tcp transport module. <6>[ 2.518226] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 2.525123] PCI: CLS 0 bytes, default 64 <6>[ 2.530141] Trying to unpack rootfs image as initramfs... <6>[ 3.595678] Freeing initrd memory: 15692K <6>[ 3.601062] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available <5>[ 3.611421] Initialise system trusted keyrings <6>[ 3.616710] workingset: timestamp_bits=30 max_order=17 bucket_order=0 <6>[ 3.629819] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 3.637136] NFS: Registering the id_resolver key type <5>[ 3.642654] Key type id_resolver registered <5>[ 3.647279] Key type id_legacy registered <6>[ 3.651787] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 3.658990] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <6>[ 3.666918] ntfs: driver 2.1.32 [Flags: R/O]. <5>[ 3.672249] Key type asymmetric registered <5>[ 3.676787] Asymmetric key parser 'x509' registered <6>[ 3.682119] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) <6>[ 3.690017] io scheduler mq-deadline registered <6>[ 3.694944] io scheduler kyber registered <3>[ 3.850383] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.859082] omap_gpio 44e07000.gpio: Could not register gpio chip -517 <4>[ 3.979918] ti-sysc: probe of 44e31000.target-module failed with error -16 <4>[ 4.025633] ti-sysc: probe of 48040000.target-module failed with error -16 <3>[ 4.104415] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 4.113116] omap_gpio 4804c000.gpio: Could not register gpio chip -517 <3>[ 4.178922] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 4.187606] omap_gpio 481ac000.gpio: Could not register gpio chip -517 <3>[ 4.206365] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 4.214981] omap_gpio 481ae000.gpio: Could not register gpio chip -517 <3>[ 4.284239] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present! <6>[ 4.292800] edma 49000000.dma: TI EDMA DMA engine driver <6>[ 4.335115] pinctrl-single 44e10800.pinmux: 142 pins, size 568 <6>[ 4.439870] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled <6>[ 4.452190] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 20, base_baud = 3000000) is a 8250 <6>[ 4.461619] printk: console [ttyS0] enabled <6>[ 4.461619] printk: console [ttyS0] enabled <6>[ 4.470672] printk: bootconsole [omap8250] disabled <6>[ 4.470672] printk: bootconsole [omap8250] disabled <6>[ 4.484472] SuperH (H)SCI(F) driver initialized <6>[ 4.491561] msm_serial: driver initialized <6>[ 4.496486] STMicroelectronics ASC driver initialized <6>[ 4.504562] STM32 USART driver initialized <6>[ 4.512060] omap_rng 48310000.rng: Random Number Generator ver. 20 <5>[ 4.532530] random: crng init done <6>[ 4.546022] brd: module loaded <6>[ 4.557129] loop: module loaded <6>[ 4.582686] CAN device driver interface <6>[ 4.588881] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded <6>[ 4.597238] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 4.602498] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 4.608873] igb: Intel(R) Gigabit Ethernet Network Driver <6>[ 4.614560] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 4.685620] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000 <6>[ 4.722050] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 <6>[ 4.731970] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4 <6>[ 4.738670] cpsw 4a100000.ethernet: ALE Table size 1024 <6>[ 4.744501] cpsw 4a100000.ethernet: Detected MACID = 34:03:de:5e:2c:05 <6>[ 4.753645] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver <6>[ 4.761576] usbcore: registered new interface driver pegasus <6>[ 4.767612] usbcore: registered new interface driver asix <6>[ 4.773328] usbcore: registered new interface driver ax88179_178a <6>[ 4.779769] usbcore: registered new interface driver cdc_ether <6>[ 4.785974] usbcore: registered new interface driver smsc75xx <6>[ 4.792046] usbcore: registered new interface driver smsc95xx <6>[ 4.798148] usbcore: registered new interface driver net1080 <6>[ 4.804122] usbcore: registered new interface driver cdc_subset <6>[ 4.810380] usbcore: registered new interface driver zaurus <6>[ 4.816324] usbcore: registered new interface driver cdc_ncm <6>[ 4.827944] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>[ 4.834780] ehci-pci: EHCI PCI platform driver <6>[ 4.839623] ehci-platform: EHCI generic platform driver <6>[ 4.845671] ehci-orion: EHCI orion driver <6>[ 4.850335] SPEAr-ehci: EHCI SPEAr driver <6>[ 4.854927] ehci-st: EHCI STMicroelectronics driver <6>[ 4.860447] ehci-exynos: EHCI Exynos driver <6>[ 4.865226] ehci-atmel: EHCI Atmel driver <6>[ 4.869873] tegra-ehci: Tegra EHCI driver <6>[ 4.874492] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver <6>[ 4.881056] ohci-pci: OHCI PCI platform driver <6>[ 4.885885] ohci-platform: OHCI generic platform driver <6>[ 4.891849] SPEAr-ohci: OHCI SPEAr driver <6>[ 4.896522] ohci-st: OHCI STMicroelectronics driver <6>[ 4.901987] ohci-atmel: OHCI Atmel driver <6>[ 4.908019] usbcore: registered new interface driver usb-storage <6>[ 4.925162] i2c /dev entries driver <5>[ 4.957687] cpuidle: enable-method property 'ti,am3352' found operations <6>[ 4.966018] sdhci: Secure Digital Host Controller Interface driver <6>[ 4.972498] sdhci: Copyright(c) Pierre Ossman <6>[ 4.981523] Synopsys Designware Multimedia Card Interface Driver <6>[ 4.990922] sdhci-pltfm: SDHCI platform and OF driver helper <4>[ 5.005785] sdhci-omap 481d8000.mmc: supply vqmmc not found, using dummy regulator <6>[ 5.040361] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 5.049931] usbcore: registered new interface driver usbhid <6>[ 5.055932] usbhid: USB HID core driver <6>[ 5.069540] NET: Registered protocol family 10 <6>[ 5.075905] Segment Routing with IPv6 <6>[ 5.079934] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 5.086960] NET: Registered protocol family 17 <6>[ 5.091706] can: controller area network core <6>[ 5.096495] NET: Registered protocol family 29 <6>[ 5.101223] can: raw protocol <6>[ 5.104469] can: broadcast manager protocol <6>[ 5.108971] can: netlink gateway - max_hops=1 <5>[ 5.114372] Key type dns_resolver registered <6>[ 5.119144] ThumbEE CPU extension supported. <5>[ 5.123713] Registering SWP/SWPB emulation handler <3>[ 5.129250] omap_voltage_late_init: Voltage driver support not added <6>[ 5.137519] mmc1: SDHCI controller on 481d8000.mmc [481d8000.mmc] using External DMA <5>[ 5.146410] Loading compiled-in X.509 certificates <6>[ 5.167735] OMAP GPIO hardware version 0.1 <4>[ 5.196110] tps65217-pmic: Failed to locate of_node [id: -1] <4>[ 5.209203] tps65217-bl: Failed to locate of_node [id: -1] <6>[ 5.224306] tps65217 0-0024: TPS65217 ID 0xe version 1.2 <4>[ 5.230693] at24 0-0050: supply vcc not found, using dummy regulator <6>[ 5.238078] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write <6>[ 5.246090] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz <4>[ 5.255808] at24 2-0054: supply vcc not found, using dummy regulator <6>[ 5.269985] mmc1: new high speed MMC card at address 0001 <6>[ 5.276552] mmcblk1: mmc1:0001 M62704 3.56 GiB <6>[ 5.281687] mmcblk1boot0: mmc1:0001 M62704 partition 1 2.00 MiB <6>[ 5.288430] mmcblk1boot1: mmc1:0001 M62704 partition 2 2.00 MiB <6>[ 5.294939] mmcblk1rpmb: mmc1:0001 M62704 partition 3 512 KiB, chardev (235:0) <6>[ 5.304448] mmcblk1: p1 <4>[ 5.308606] at24 2-0055: supply vcc not found, using dummy regulator <4>[ 5.349668] at24 2-0056: supply vcc not found, using dummy regulator <4>[ 5.389126] at24 2-0057: supply vcc not found, using dummy regulator <6>[ 5.427600] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz <6>[ 5.451239] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22) <6>[ 5.460420] sdhci-omap 48060000.mmc: Got CD GPIO <4>[ 5.465580] sdhci-omap 48060000.mmc: supply vqmmc not found, using dummy regulator <6>[ 5.526376] mmc0: SDHCI controller on 48060000.mmc [48060000.mmc] using External DMA <6>[ 5.537990] cpsw 4a100000.ethernet: initializing cpsw version 1.12 (0) <6>[ 5.657394] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL) <6>[ 7.796415] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off <6>[ 7.805675] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 7.835701] Sending DHCP requests ., OK <6>[ 7.939772] IP-Config: Got DHCP answer from 172.16.3.3, my address is 172.16.3.211 <6>[ 7.947736] IP-Config: Complete: <6>[ 7.951276] device=eth0, hwaddr=34:03:de:5e:2c:05, ipaddr=172.16.3.211, mask=255.255.255.0, gw=172.16.3.3 <6>[ 7.961696] host=172.16.3.211, domain=denx.de, nis-domain=(none) <6>[ 7.968508] bootserver=172.16.3.33, rootserver=172.16.3.33, rootpath= <6>[ 7.968527] nameserver0=172.16.3.3 <6>[ 7.979896] ntpserver0=172.16.3.3 <6>[ 7.997492] Freeing unused kernel memory: 2048K <6>[ 8.006481] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 8.206395] udevd[97]: starting version 3.2.9 <27>[ 8.222527] udevd[97]: specified user 'tss' unknown <27>[ 8.228292] udevd[97]: specified group 'tss' unknown <30>[ 8.247481] udevd[98]: starting eudev-3.2.9 <4>[ 9.968175] am335x-phy-driver 47401300.usb-phy: supply vcc not found, using dummy regulator <4>[ 9.977367] am335x-phy-driver 47401300.usb-phy: dummy supplies not allowed for exclusive requests <4>[ 10.176887] am335x-phy-driver 47401b00.usb-phy: supply vcc not found, using dummy regulator <4>[ 10.185977] am335x-phy-driver 47401b00.usb-phy: dummy supplies not allowed for exclusive requests <6>[ 10.324270] musb-hdrc musb-hdrc.1: MUSB HDRC host driver <6>[ 10.330094] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 10.585870] hub 1-0:1.0: USB hub found <6>[ 10.655663] hub 1-0:1.0: 1 port detected done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-905138/environment . /lava-905138/environment / # /lava-905138/bin/lava-test-runner /lava-905138/0 /lava-905138/bin/lava-test-runner /lava-905138/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-905138/0/tests/0_dmesg + cat uuid + UUID=905138_1.5.2.4.1 + <8>[ 15.449925] set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 15.506739] <8>[ 15.558551] <8>[ 15.610149] + set +x <8>[ 15.620969] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-905138/environment / # . /lava-905138/environment/lava-905138/bin/lava-test-runner /lava-905138/1 / # /lava-905138/bin/lava-test-runner /lava-905138/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-905138/1/tests/1_bootrr + cat uuid + UUID=905138_1.5.2.4.5 + <8>[ 16.151847] set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-905138/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto sound /lava-905138/1/../bin/lava-test-case <8>[ 17.244020] /lava-905138/1/../bin/lava-test-case <8>[ 17.293614] /lava-905138/1/../bin/lava-test-case <8>[ 17.323700] /lava-905138/1/../bin/lava-test-case <8>[ 17.379001] /lava-905138/1/../bin/lava-test-case <8>[ 17.425235] /lava-905138/1/../bin/lava-test-case <8>[ 17.462465] /lava-905138/1/../bin/lava-test-case <8>[ 17.509122] /lava-905138/1/../bin/lava-test-case <8>[ 17.554082] /lava-905138/1/../bin/lava-test-case <8>[ 17.591283] /lava-905138/1/../bin/lava-test-case <8>[ 17.637478] /lava-905138/1/../bin/lava-test-case <8>[ 18.714017] /lava-905138/1/../bin/lava-test-case <8>[ 19.775999] /lava-905138/1/../bin/lava-test-case <8>[ 19.812610] /lava-905138/1/../bin/lava-test-case <8>[ 19.848933] /lava-905138/1/../bin/lava-test-case <8>[ 19.886124] /lava-905138/1/../bin/lava-test-case <8>[ 19.931589] /lava-905138/1/../bin/lava-test-case <8>[ 19.969547] /lava-905138/1/../bin/lava-test-case <8>[ 20.016401] /lava-905138/1/../bin/lava-test-case <8>[ 20.061606] /lava-905138/1/../bin/lava-test-case <8>[ 20.098779] /lava-905138/1/../bin/lava-test-case <8>[ 20.145099] /lava-905138/1/../bin/lava-test-case <8>[ 20.191433] /lava-905138/1/../bin/lava-test-case <8>[ 20.229161] /lava-905138/1/../bin/lava-test-case <8>[ 20.276255] /lava-905138/1/../bin/lava-test-case <8>[ 20.313507] /lava-905138/1/../bin/lava-test-case <8>[ 20.359952] /lava-905138/1/../bin/lava-test-case <8>[ 21.423072] /lava-905138/1/../bin/lava-test-case <8>[ 22.485253] /lava-905138/1/../bin/lava-test-case <8>[ 22.522979] /lava-905138/1/../bin/lava-test-case <8>[ 22.569969] /lava-905138/1/../bin/lava-test-case <8>[ 22.607862] /lava-905138/1/../bin/lava-test-case <8>[ 22.653416] /lava-905138/1/../bin/lava-test-case <8>[ 23.714611] /lava-905138/1/../bin/lava-test-case <8>[ 24.781305] /lava-905138/1/../bin/lava-test-case <8>[ 24.818471] /lava-905138/1/../bin/lava-test-case <8>[ 24.864464] /lava-905138/1/../bin/lava-test-case <8>[ 25.925009] /lava-905138/1/../bin/lava-test-case <8>[ 26.986104] /lava-905138/1/../bin/lava-test-case <8>[ 28.051724] /lava-905138/1/../bin/lava-test-case <8>[ 29.114395] /lava-905138/1/../bin/lava-test-case <8>[ 30.174856] /lava-905138/1/../bin/lava-test-case <8>[ 31.236126] /lava-905138/1/../bin/lava-test-case <8>[ 32.301230] /lava-905138/1/../bin/lava-test-case <8>[ 33.364420] /lava-905138/1/../bin/lava-test-case <8>[ 34.425877] /lava-905138/1/../bin/lava-test-case <8>[ 35.491593] /lava-905138/1/../bin/lava-test-case <8>[ 36.553359] /lava-905138/1/../bin/lava-test-case <8>[ 37.614371] /lava-905138/1/../bin/lava-test-case <8>[ 38.676011] /opt/bootrr/libexec/bootrr/boards/ti,am335x-bone-black: line 84: assert_device-present: not found /lava-905138/1/../bin/lava-test-case <8>[ 38.714677] /lava-905138/1/../bin/lava-test-case <8>[ 39.785068] /lava-905138/1/../bin/lava-test-case <8>[ 40.844936] + set +x <8>[ 40.860648] / #