connecting to NetworkSerialPort(target=Target(name='imx6dl-riotboard-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4011, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4011 connected to 10.8.254.5 (port 4011) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2023.01.0 #1 Fri Jan 27 16:21:21 CET 2023 Board: RIoTboard i.MX6S detected i.MX6 Solo revision 1.1 i.MX6 Solo unique ID: 132c61d4d72d78a9 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2194000.mmc@2194000.of: registered as mmc1 imx-esdhc 2198000.mmc@2198000.of: registered as mmc2 imx-esdhc 219c000.mmc@219c000.of: registered as mmc3 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-hdmi 120000.hdmi@120000.of: Detected HDMI controller 0x13:0x1a:0xa0:0xc1 netconsole: registered as netconsole-1 malloc space: 0x2fe7b320 -> 0x4fcf663f (size 510.5 MiB) mmc3: detected MMC card version 4.41 mmc3: registered mmc3.boot0 mmc3: registered mmc3.boot1 mmc3: registered mmc3 [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mRIoTboard i.MX6S:/[0m bootm -v -r /mnt/tftp/951837/tftp-deploy-8ajq5087/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/951837/tftp-deploy-8ajq5087/dtb/imx6dl-riotboard.dtb /mnt/tftp/951837/tftp-deploy-8ajq5087/kernel/zImage [1;32mbarebox@[1;36mRIoTboard i.MX6S:/[0m bootm -v -r /mnt/tftp/951837/tftp-deploy-8ajq5087/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/951837/tftp-deploy-8ajq5087/dtb/imx6dl-riotboard.dtb /mnt/tftp/951837/tftp-deploy-8ajq5087/kernel/zImage [1;33mWARNING:[0m eth0: No MAC address set. Using random address 42:13:2d:cb:4e:ed eth0: 1000Mbps full duplex link detected T eth0: DHCP client bound to address 10.8.254.21 Loading ARM Linux zImage '/mnt/tftp/951837/tftp-deploy-8ajq5087/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x13256000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/951837/tftp-deploy-8ajq5087/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x189b72dd Loading devicetree from '/mnt/tftp/951837/tftp-deploy-8ajq5087/dtb/imx6dl-riotboard.dtb' commandline: console=ttymxc1,115200n8 Starting kernel at 0x13256000, initrd at 0x18000000, oftree at 0x189b8000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.179-cip32 (KernelCI@build-j1513439-arm-gcc-10-imx-v6-v7-defconfig-8sffg) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Tue May 16 19:48:09 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: RIoTboard i.MX6S [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 64 MiB at 0x4a000000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000010000000-0x000000003fffffff] [ 0.000000] HighMem [mem 0x0000000040000000-0x000000004fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000010000000-0x000000004fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000004fffffff] [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] percpu: Embedded 20 pages/cpu s51948 r8192 d21780 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260608 [ 0.000000] Kernel command line: console=ttymxc1,115200n8 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 932500K/1048576K available (14336K kernel code, 2025K rwdata, 4848K rodata, 1024K init, 6662K bss, 50540K reserved, 65536K cma-reserved, 195512K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Running RCU self tests [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU lockdep checking is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 512 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76450001 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000009] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000042] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.001791] Console: colour dummy device 80x30 [ 0.001842] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001865] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001887] ... MAX_LOCK_DEPTH: 48 [ 0.001908] ... MAX_LOCKDEP_KEYS: 8192 [ 0.001929] ... CLASSHASH_SIZE: 4096 [ 0.001949] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001968] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001989] ... CHAINHASH_SIZE: 32768 [ 0.002010] memory used by lock dependency info: 4061 kB [ 0.002030] memory used for stack traces: 2112 kB [ 0.002051] per task-struct memory footprint: 1536 bytes [ 0.002176] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.002223] pid_max: default: 32768 minimum: 301 [ 0.002619] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.002663] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.006251] CPU: Testing write buffer coherency: ok [ 0.006390] CPU0: Spectre v2: using BPIALL workaround [ 0.007288] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.010167] Setting up static identity map for 0x10100000 - 0x10100078 [ 0.010871] rcu: Hierarchical SRCU implementation. [ 0.012661] smp: Bringing up secondary CPUs ... [ 0.012695] smp: Brought up 1 node, 1 CPU [ 0.012723] SMP: Total of 1 processors activated (6.00 BogoMIPS). [ 0.012748] CPU: All CPU(s) started in SVC mode. [ 0.015278] devtmpfs: initialized [ 0.045736] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.046926] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.047003] futex hash table entries: 256 (order: 2, 16384 bytes, linear) [ 0.049928] pinctrl core: initialized pinctrl subsystem [ 0.056050] NET: Registered protocol family 16 [ 0.079407] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.084591] thermal_sys: Registered thermal governor 'step_wise' [ 0.084913] cpuidle: using governor menu [ 0.085079] CPU identified as i.MX6DL, silicon rev 1.1 [ 0.498206] vdd1p1: supplied by regulator-dummy [ 0.517565] vdd3p0: supplied by regulator-dummy [ 0.536382] vdd2p5: supplied by regulator-dummy [ 0.555333] vddarm: supplied by regulator-dummy [ 0.574744] vddpu: supplied by regulator-dummy [ 0.592923] vddsoc: supplied by regulator-dummy [ 1.286063] No ATAGs? [ 1.286424] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 1.286514] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 1.291935] imx6dl-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver [ 1.399914] vgaarb: loaded [ 1.402047] SCSI subsystem initialized [ 1.403699] usbcore: registered new interface driver usbfs [ 1.403978] usbcore: registered new interface driver hub [ 1.404125] usbcore: registered new device driver usb [ 1.404505] usb_phy_generic usbphynop1: supply vcc not found, using dummy regulator [ 1.405242] usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests [ 1.405647] usb_phy_generic usbphynop2: supply vcc not found, using dummy regulator [ 1.406244] usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests [ 1.412429] i2c i2c-0: IMX I2C adapter registered [ 1.416599] i2c i2c-1: IMX I2C adapter registered [ 1.418227] i2c i2c-3: IMX I2C adapter registered [ 1.418742] mc: Linux media interface: v0.10 [ 1.418883] videodev: Linux video capture interface: v2.00 [ 1.420941] pps_core: LinuxPPS API ver. 1 registered [ 1.420974] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.421057] PTP clock support registered [ 1.422809] Advanced Linux Sound Architecture Driver Initialized. [ 1.427358] Bluetooth: Core ver 2.22 [ 1.427503] NET: Registered protocol family 31 [ 1.427529] Bluetooth: HCI device and connection manager initialized [ 1.427665] Bluetooth: HCI socket layer initialized [ 1.427708] Bluetooth: L2CAP socket layer initialized [ 1.427875] Bluetooth: SCO socket layer initialized [ 1.432768] clocksource: Switched to clocksource mxc_timer1 [ 2.834643] VFS: Disk quotas dquot_6.6.0 [ 2.834828] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.864849] NET: Registered protocol family 2 [ 2.865496] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 2.868583] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 22528 bytes, linear) [ 2.868737] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 2.868899] TCP bind hash table entries: 8192 (order: 6, 327680 bytes, linear) [ 2.870050] TCP: Hash tables configured (established 8192 bind 8192) [ 2.870684] UDP hash table entries: 512 (order: 3, 49152 bytes, linear) [ 2.870899] UDP-Lite hash table entries: 512 (order: 3, 49152 bytes, linear) [ 2.871500] NET: Registered protocol family 1 [ 2.874584] RPC: Registered named UNIX socket transport module. [ 2.874689] RPC: Registered udp transport module. [ 2.874718] RPC: Registered tcp transport module. [ 2.874743] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.876450] PCI: CLS 0 bytes, default 64 [ 2.878020] Trying to unpack rootfs image as initramfs... [ 4.057490] Freeing initrd memory: 9952K [ 4.059187] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 4.064726] Initialise system trusted keyrings [ 4.065660] workingset: timestamp_bits=30 max_order=18 bucket_order=0 [ 4.088210] NFS: Registering the id_resolver key type [ 4.088407] Key type id_resolver registered [ 4.088514] Key type id_legacy registered [ 4.088842] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 4.088959] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 4.089149] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 4.090895] fuse: init (API version 7.32) [ 4.185673] Key type asymmetric registered [ 4.185869] Asymmetric key parser 'x509' registered [ 4.186156] bounce: pool size: 64 pages [ 4.186299] io scheduler mq-deadline registered [ 4.186333] io scheduler kyber registered [ 4.212571] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 4.212869] imx-sdma 20ec000.sdma: Falling back to sysfs fallback for: imx/sdma/sdma-imx6q.bin [ 4.218629] mxs-dma 110000.dma-apbh: initialized [ 4.230703] pfuze100-regulator 0-0008: Full layer: 1, Metal layer: 1 [ 4.231631] pfuze100-regulator 0-0008: FAB: 0, FIN: 0 [ 4.231665] pfuze100-regulator 0-0008: pfuze100 found. [ 4.262852] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 32, base_baud = 5000000) is a IMX [ 4.267974] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 75, base_baud = 5000000) is a IMX [ 5.156246] printk: console [ttymxc1] enabled [ 5.163597] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 76, base_baud = 5000000) is a IMX [ 5.175832] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 77, base_baud = 5000000) is a IMX [ 5.187641] 21f4000.serial: ttymxc4 at MMIO 0x21f4000 (irq = 78, base_baud = 5000000) is a IMX [ 5.229944] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops) [ 5.236647] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops) [ 5.242262] etnaviv-gpu 130000.gpu: model: GC880, revision: 5106 [ 5.249220] etnaviv-gpu 134000.gpu: model: GC320, revision: 5007 [ 5.258356] [drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor 0 [ 5.275731] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_crtc_ops) [ 5.283714] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_crtc_ops) [ 5.292335] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.31a with HDCP (DWC HDMI 3D TX PHY) [ 5.308923] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops) [ 5.319267] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1 [ 5.329041] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 5.337204] imx-ipuv3 2400000.ipu: IPUv3H probed [ 5.376113] brd: module loaded [ 5.413780] loop: module loaded [ 5.430518] CAN device driver interface [ 5.439987] pps pps0: new PPS source ptp0 [ 5.512023] fec 2188000.ethernet eth0: registered PHC device 0 [ 5.521436] usbcore: registered new interface driver r8152 [ 5.527251] usbcore: registered new interface driver lan78xx [ 5.533171] usbcore: registered new interface driver asix [ 5.538700] usbcore: registered new interface driver ax88179_178a [ 5.544978] usbcore: registered new interface driver cdc_ether [ 5.550982] usbcore: registered new interface driver smsc95xx [ 5.556928] usbcore: registered new interface driver net1080 [ 5.562780] usbcore: registered new interface driver cdc_subset [ 5.568824] usbcore: registered new interface driver zaurus [ 5.574587] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 5.582190] usbcore: registered new interface driver cdc_ncm [ 5.587930] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.594530] ehci-pci: EHCI PCI platform driver [ 5.599112] ehci-mxc: Freescale On-Chip EHCI Host driver [ 5.605547] usbcore: registered new interface driver usb-storage [ 5.631647] snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc0 [ 5.637928] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01T00:00:00 UTC (0) [ 5.647542] i2c /dev entries driver [ 5.665734] Bluetooth: HCI UART driver ver 2.3 [ 5.670215] Bluetooth: HCI UART protocol H4 registered [ 5.675535] Bluetooth: HCI UART protocol LL registered [ 5.683922] sdhci: Secure Digital Host Controller Interface driver [ 5.690129] sdhci: Copyright(c) Pierre Ossman [ 5.694576] sdhci-pltfm: SDHCI platform and OF driver helper [ 5.703954] sdhci-esdhc-imx 2194000.mmc: Got CD GPIO [ 5.709157] sdhci-esdhc-imx 2194000.mmc: Got WP GPIO [ 5.719794] sdhci-esdhc-imx 2198000.mmc: Got CD GPIO [ 5.731630] caam 2100000.crypto: Entropy delay = 3200 [ 5.737715] sdhci-esdhc-imx 2198000.mmc: Got WP GPIO [ 5.797603] caam 2100000.crypto: Instantiated RNG4 SH0 [ 5.858361] caam 2100000.crypto: Instantiated RNG4 SH1 [ 5.866934] caam 2100000.crypto: device ID = 0x0a16010000000100 (Era 4) [ 5.873695] caam 2100000.crypto: job rings = 2, qi = 0 [ 5.891979] mmc3: SDHCI controller on 219c000.mmc [219c000.mmc] using ADMA [ 5.907196] mmc2: SDHCI controller on 2198000.mmc [2198000.mmc] using ADMA [ 5.915847] mmc1: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA [ 5.942421] caam algorithms registered in /proc/crypto [ 5.954107] caam 2100000.crypto: registering rng-caam [ 5.966252] usbcore: registered new interface driver usbhid [ 5.971857] usbhid: USB HID core driver [ 5.980523] ipu1_csi0: Registered ipu1_csi0 capture as /dev/video0 [ 5.989505] ipu1_ic_prpenc: Registered ipu1_ic_prpenc capture as /dev/video1 [ 5.997802] ipu1_ic_prpvf: Registered ipu1_ic_prpvf capture as /dev/video2 [ 6.005976] ipu1_csi1: Registered ipu1_csi1 capture as /dev/video3 [ 6.019762] mmc3: new DDR MMC card at address 0001 [ 6.035389] mmcblk3: mmc3:0001 MMC04G 3.58 GiB [ 6.040829] mmcblk3boot0: mmc3:0001 MMC04G partition 1 2.00 MiB [ 6.055166] sgtl5000 0-000a: sgtl5000 revision 0x11 [ 6.060482] mmcblk3boot1: mmc3:0001 MMC04G partition 2 2.00 MiB [ 6.068360] mmcblk3rpmb: mmc3:0001 MMC04G partition 3 128 KiB, chardev (243:0) [ 6.081253] sgtl5000 0-000a: Using internal LDO instead of VDDD: check ER1 erratum [ 6.143163] random: crng init done [ 6.151981] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 6.210844] NET: Registered protocol family 10 [ 6.219794] Segment Routing with IPv6 [ 6.223765] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 6.232032] NET: Registered protocol family 17 [ 6.236628] can: controller area network core [ 6.241251] NET: Registered protocol family 29 [ 6.245936] can: raw protocol [ 6.249167] can: broadcast manager protocol [ 6.253577] can: netlink gateway - max_hops=1 [ 6.258488] Key type dns_resolver registered [ 6.276078] Registering SWP/SWPB emulation handler [ 6.281437] Loading compiled-in X.509 certificates [ 6.416801] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 6.422274] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 6.452833] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 6.460110] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.468665] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.475963] usb usb1: Product: EHCI Host Controller [ 6.480868] usb usb1: Manufacturer: Linux 5.10.179-cip32 ehci_hcd [ 6.487298] usb usb1: SerialNumber: ci_hdrc.1 [ 6.496631] hub 1-0:1.0: USB hub found [ 6.500823] hub 1-0:1.0: 1 port detected [ 6.521426] imx-media: Registered ipu_ic_pp csc/scaler as /dev/video4 [ 6.532618] imx_thermal 20c8000.anatop:tempmon: Commercial CPU temperature grade - max:95C critical:90C passive:85C [ 6.550507] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 6.605723] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 6.614096] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 6.622836] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db [ 6.631126] ALSA device list: [ 6.634295] #0: imx6-riotboard-sgtl5000 [ 6.642946] Freeing unused kernel memory: 1024K [ 6.663579] Run /init as init process [ 6.802944] usb 1-1: new high-speed USB device number 2 using ci_hdrc Starting syslogd: OK Starting klogd: OK Running sysctl: OK [ 7.014735] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.00 [ 7.023273] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 7.030479] usb 1-1: Product: USB 2.0 Hub [MTT] Populating /dev using udev: [ 7.058470] udevd[180]: starting version 3.2.9 [ 7.066989] hub 1-1:1.0: USB hub found [ 7.071097] hub 1-1:1.0: 4 ports detected [ 7.094918] udevd[180]: specified user 'tss' unknown [ 7.100189] udevd[180]: specified group 'tss' unknown [ 7.125298] udevd[181]: starting eudev-3.2.9 [ 8.593267] coda 2040000.vpu: Direct firmware load for vpu_fw_imx6d.bin failed with error -2 [ 8.601739] coda 2040000.vpu: Falling back to sysfs fallback for: vpu_fw_imx6d.bin done Saving random seed: OK Starting network: OK Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-951837/environment . /lava-951837/environment / # /lava-951837/bin/lava-test-runner /lava-951837/0 /lava-951837/bin/lava-test-runner /lava-951837/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-951837/0/tests/0_dmesg + cat uuid + UUID=951837_1.5.2.3.1[ 10.713523] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 10.808182] [ 10.891636] [ 10.975999] + set +x [ 10.986977] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-951837/environment / # . /lava-951837/environment/lava-951837/bin/lava-test-runner /lava-951837/1 / # /lava-951837/bin/lava-test-runner /lava-951837/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-951837/1/tests/1_bootrr + cat uuid + UUID=951837_1.5.2.3.5[ 11.567126] + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-951837/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-951837/1/../bin/lava-test-case [ 11.683285] /lava-951837/1/../bin/lava-test-case [ 11.763653] /lava-951837/1/../bin/lava-test-case [ 11.808905] + set +x [ 11.842204] / #