[Enter `^Ec?' for help] U-Boot 2016.03-rc1-00131-g39af3d8-dirty (Feb 09 2016 - 16:39:49 +0000) DRAM: 944 MiB WARNING: Caches not enabled RPI Model B+ (0x10) MMC: bcm2835_sdhci: 0 reading uboot.env In: serial Out: lcd Err: lcd Net: Net Initialization Skipped No ethernet found. starting USB... USB0: Core Release: 2.80a scanning bus 0 for devices... 4 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found Hit any key to stop autoboot: 2  0 U-Boot> usb start usb start U-Boot> setenv autoload no setenv autoload no U-Boot> setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff U-Boot> setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff U-Boot> dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.201.127 (260 ms) U-Boot> setenv serverip 192.168.201.1 setenv serverip 192.168.201.1 U-Boot> tftp 0x01000000 10500323/tftp-deploy-i2dfgu9m/kernel/zImage tftp 0x01000000 10500323/tftp-deploy-i2dfgu9m/kernel/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.201.1; our IP address is 192.168.201.127 Filename '10500323/tftp-deploy-i2dfgu9m/kernel/zImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ###### 530.3 KiB/s done Bytes transferred = 5808200 (58a048 hex) U-Boot> tftp 0x02200000 10500323/tftp-deploy-i2dfgu9m/ramdisk/ramdisk.cpio.gz.uboot tftp 0x02200000 10500323/tftp-deploy-i2dfgu9m/ramdisk/ramdisk.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.201.1; our IP address is 192.168.201.127 Filename '10500323/tftp-deploy-i2dfgu9m/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x2200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################## 991.2 KiB/s done Bytes transferred = 9261731 (8d52a3 hex) U-Boot> setenv initrd_size ${filesize} setenv initrd_size ${filesize} U-Boot> tftp 0x00000100 10500323/tftp-deploy-i2dfgu9m/dtb/bcm2836-rpi-2-b.dtb tftp 0x00000100 10500323/tftp-deploy-i2dfgu9m/dtb/bcm2836-rpi-2-b.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.201.1; our IP address is 192.168.201.127 Filename '10500323/tftp-deploy-i2dfgu9m/dtb/bcm2836-rpi-2-b.dtb'. Load address: 0x100 Loading: *# 890.6 KiB/s done Bytes transferred = 13687 (3577 hex) U-Boot> setenv bootargs 'console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' setenv bootargs 'console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' U-Boot> bootz 0x01000000 0x02200000 0x00000100 bootz 0x01000000 0x02200000 0x00000100 Kernel image @ 0x1000000 [ 0x000000 - 0x58a048 ] ## Loading init Ramdisk from Legacy Image at 02200000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 9261667 Bytes = 8.8 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 00000100 Booting using the fdt blob at 0x000100 reserving fdt memory region: addr=0 size=1000 Using Device Tree in place at 00000100, end 00006676 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.180-cip33 (KernelCI@build-j1578105-arm-gcc-10-bcm2835-defconfig-skbdh) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 Sun May 28 23:20:57 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 2 Model B [ 0.000000] earlycon: pl11 at MMIO 0x3f201000 (options '115200n8') [ 0.000000] printk: bootconsole [pl11] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Ignoring RAM at 0x30000000-0x3b000000 [ 0.000000] Consider using a HIGHMEM enabled kernel. [ 0.000000] Reserved memory: created CMA memory pool at 0x2c000000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm/kernel/devtree.c:148 arm_dt_init_cpu_maps+0x1b8/0x200 [ 0.000000] DT /cpu 2 nodes greater than max cores 1, capping them [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.10.180-cip33 #1 [ 0.000000] Hardware name: BCM2835 [ 0.000000] Backtrace: [ 0.000000] [] (dump_backtrace) from [] (show_stack+0x20/0x24) [ 0.000000] r7:c0e01edc r6:00000000 r5:00000009 r4:c0bbdd89 [ 0.000000] [] (show_stack) from [] (dump_stack+0x28/0x30) [ 0.000000] [] (dump_stack) from [] (__warn+0x9c/0xdc) [ 0.000000] r5:00000009 r4:c0b34a80 [ 0.000000] [] (__warn) from [] (warn_slowpath_fmt+0x88/0xcc) [ 0.000000] r9:c0f75988 r8:c0b34af9 r7:00000009 r6:c0d04d08 r5:00000094 r4:c0b34a80 [ 0.000000] [] (warn_slowpath_fmt) from [] (arm_dt_init_cpu_maps+0x1b8/0x200) [ 0.000000] r8:c0b34a2d r7:00000000 r6:ff000000 r5:00000000 r4:eb9d96c4 [ 0.000000] [] (arm_dt_init_cpu_maps) from [] (setup_arch+0x26c/0x644) [ 0.000000] r10:c0e01f70 r9:c0e01f68 r8:ebffff00 r7:c0bcb0c8 r6:2fffffff r5:c0e08738 [ 0.000000] r4:c0d34020 [ 0.000000] [] (setup_arch) from [] (start_kernel+0x64/0x520) [ 0.000000] r10:10c53c7d r9:410fc075 r8:00000100 r7:c0f8f03c r6:c0e04240 r5:00000051 [ 0.000000] r4:c0d004b0 [ 0.000000] [] (start_kernel) from [<00000000>] (0x0) [ 0.000000] r9:410fc075 r8:00000100 r7:00000000 r6:10c03c7d r5:00000051 r4:c0d004b0 [ 0.000000] ---[ end trace 58996bc4bee07162 ]--- [ 0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 195072 [ 0.000000] Kernel command line: console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 689060K/786432K available (8192K kernel code, 1595K rwdata, 3248K rodata, 1024K init, 710K bss, 31836K reserved, 65536K cma-reserved) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 <6>[ 0.000000] ftrace: allocating 32705 entries in 96 pages <6>[ 0.000000] ftrace: allocated 96 pages with 2 groups <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <3>[ 0.000000] [Firmware Bug]: Bootloader left irq enabled: bank 1 irq 9 <6>[ 0.000019] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns <6>[ 0.008818] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns <6>[ 0.018640] bcm2835: system timer (irq = 27) <6>[ 0.023777] arch_timer: cp15 timer(s) running at 19.20MHz (virt). <6>[ 0.030274] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns <6>[ 0.041545] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns <6>[ 0.049978] Switching to timer-based delay loop, resolution 52ns <6>[ 0.056774] Console: colour dummy device 80x30 <6>[ 0.061645] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) <6>[ 0.072491] pid_max: default: 32768 minimum: 301 <6>[ 0.077842] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.085591] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.094790] CPU: Testing write buffer coherency: ok <6>[ 0.101186] Setting up static identity map for 0x100000 - 0x100054 <6>[ 0.109380] devtmpfs: initialized <6>[ 0.119191] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 <6>[ 0.127609] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.137927] futex hash table entries: 256 (order: -1, 3072 bytes, linear) <6>[ 0.148364] pinctrl core: initialized pinctrl subsystem <6>[ 0.155981] NET: Registered protocol family 16 <6>[ 0.162905] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.173606] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.174069] No ATAGs? <6>[ 0.183098] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. <6>[ 0.191526] hw-breakpoint: maximum watchpoint size is 8 bytes. <6>[ 0.198075] Serial: AMBA PL011 UART driver <6>[ 0.223658] Kprobes globally optimized <5>[ 0.233136] SCSI subsystem initialized <6>[ 0.237558] usbcore: registered new interface driver usbfs <6>[ 0.243559] usbcore: registered new interface driver hub <6>[ 0.249296] usbcore: registered new device driver usb <4>[ 0.254973] usb_phy_generic phy: supply vcc not found, using dummy regulator <4>[ 0.262621] usb_phy_generic phy: dummy supplies not allowed for exclusive requests <6>[ 0.270894] mc: Linux media interface: v0.10 <6>[ 0.275559] videodev: Linux video capture interface: v2.00 <6>[ 0.281709] Advanced Linux Sound Architecture Driver Initialized. <6>[ 0.288936] Bluetooth: Core ver 2.22 <6>[ 0.292951] NET: Registered protocol family 31 <6>[ 0.297748] Bluetooth: HCI device and connection manager initialized <6>[ 0.304513] Bluetooth: HCI socket layer initialized <6>[ 0.309752] Bluetooth: L2CAP socket layer initialized <6>[ 0.315192] Bluetooth: SCO socket layer initialized <6>[ 0.320998] clocksource: Switched to clocksource arch_sys_counter <6>[ 0.570803] simple-framebuffer 3b006000.framebuffer: framebuffer at 0x3b006000, 0x85400 bytes, mapped to 0x(ptrval) <6>[ 0.581805] simple-framebuffer 3b006000.framebuffer: format=r5g6b5, mode=656x416x16, linelength=1312 <6>[ 0.595207] Console: switching to colour frame buffer device 82x26 <6>[ 0.604812] simple-framebuffer 3b006000.framebuffer: fb0: simplefb registered! <6>[ 0.622450] NET: Registered protocol family 2 <6>[ 0.627655] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 0.637075] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) <6>[ 0.645963] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 0.654215] TCP bind hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 0.661855] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 0.668834] UDP hash table entries: 512 (order: 1, 8192 bytes, linear) <6>[ 0.675807] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes, linear) <6>[ 0.683398] NET: Registered protocol family 1 <6>[ 0.688881] RPC: Registered named UNIX socket transport module. <6>[ 0.695220] RPC: Registered udp transport module. <6>[ 0.700278] RPC: Registered tcp transport module. <6>[ 0.705348] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.714135] Unpacking initramfs... <6>[ 1.512880] Freeing initrd memory: 9048K <6>[ 1.518285] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available <5>[ 1.528447] Initialise system trusted keyrings <6>[ 1.533656] workingset: timestamp_bits=30 max_order=18 bucket_order=0 <6>[ 1.551202] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). <5>[ 1.679893] Key type asymmetric registered <5>[ 1.684508] Asymmetric key parser 'x509' registered <6>[ 1.689820] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) <6>[ 1.697648] io scheduler mq-deadline registered <6>[ 1.702546] io scheduler kyber registered <6>[ 1.715409] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled <6>[ 1.727629] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver <6>[ 1.739010] usbcore: registered new interface driver zd1211rw <6>[ 1.745281] usbcore: registered new interface driver lan78xx <6>[ 1.751397] usbcore: registered new interface driver asix <6>[ 1.757227] usbcore: registered new interface driver ax88179_178a <6>[ 1.763769] usbcore: registered new interface driver cdc_ether <6>[ 1.770060] usbcore: registered new interface driver smsc95xx <6>[ 1.776246] usbcore: registered new interface driver net1080 <6>[ 1.782385] usbcore: registered new interface driver cdc_subset <6>[ 1.788731] usbcore: registered new interface driver zaurus <6>[ 1.794780] usbcore: registered new interface driver cdc_ncm <6>[ 1.801479] usbcore: registered new interface driver usb-storage <6>[ 1.808064] i2c /dev entries driver <4>[ 1.814307] i2c-bcm2835 3f805000.i2c: Could not read clock-frequency property <6>[ 1.823781] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer <6>[ 1.830956] sdhci: Secure Digital Host Controller Interface driver <6>[ 1.837556] sdhci: Copyright(c) Pierre Ossman <6>[ 1.842586] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 1.849455] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 1.856972] usbcore: registered new interface driver usbhid <6>[ 1.862949] usbhid: USB HID core driver <6>[ 1.867284] bcm2835-mbox 3f00b880.mailbox: mailbox enabled <6>[ 1.875292] NET: Registered protocol family 10 <6>[ 1.881516] Segment Routing with IPv6 <6>[ 1.885648] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 1.892890] NET: Registered protocol family 17 <6>[ 1.898251] oprofile: using timer interrupt. <5>[ 1.903345] Loading compiled-in X.509 certificates <6>[ 1.915079] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 81, base_baud = 0) is a PL011 rev2 <6>[ 1.924599] printk: console [ttyAMA0] enabled <6>[ 1.924599] printk: console [ttyAMA0] enabled <6>[ 1.933941] printk: bootconsole [pl11] disabled <6>[ 1.933941] printk: bootconsole [pl11] disabled <6>[ 1.947650] raspberrypi-firmware soc:firmware: Attached to firmware from 2014-12-19T18:44:06 <4>[ 1.959209] ------------[ cut here ]------------ <4>[ 1.964158] WARNING: CPU: 0 PID: 44 at drivers/cpufreq/cpufreq-dt.c:79 dt_cpufreq_probe+0xf8/0x2f0 <4>[ 1.973384] Modules linked in: <4>[ 1.976712] CPU: 0 PID: 44 Comm: kworker/0:2 Tainted: G W 5.10.180-cip33 #1 <4>[ 1.985232] Hardware name: BCM2835 <4>[ 1.988911] Workqueue: events deferred_probe_work_func <4>[ 1.994316] Backtrace: <4>[ 1.997039] [] (dump_backtrace) from [] (show_stack+0x20/0x24) <4>[ 2.004874] r7:00000000 r6:00000000 r5:00000009 r4:c0bbdd89 <4>[ 2.010794] [] (show_stack) from [] (dump_stack+0x28/0x30) <4>[ 2.018292] [] (dump_stack) from [] (__warn+0x9c/0xdc) <4>[ 2.025428] r5:00000009 r4:c0ba6919 <4>[ 2.029267] [] (__warn) from [] (warn_slowpath_fmt+0x88/0xcc) <4>[ 2.037015] r9:c470bbc8 r8:00000000 r7:00000009 r6:c062e684 r5:0000004f r4:c0ba6919 <4>[ 2.045026] [] (warn_slowpath_fmt) from [] (dt_cpufreq_probe+0xf8/0x2f0) <4>[ 2.053727] r8:00000000 r7:c470aa10 r6:c470bbc0 r5:c0e08868 r4:00000000 <4>[ 2.060689] [] (dt_cpufreq_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.069414] r10:00000003 r9:c103178c r8:00000000 r7:c1031784 r6:c0f35e24 r5:c470aa10 <4>[ 2.077503] r4:00000000 <4>[ 2.080303] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.088829] r7:c1031784 r6:c0f35e24 r5:00000000 r4:c470aa10 <4>[ 2.094762] [] (really_probe) from [] (driver_probe_device+0x194/0x1bc) <4>[ 2.103377] r10:00000003 r9:00000000 r8:c0f25548 r7:c470aa10 r6:c46bd7fc r5:c0f35e24 <4>[ 2.111467] r4:c470aa10 <4>[ 2.114268] [] (driver_probe_device) from [] (__device_attach_driver+0xb8/0xf8) <4>[ 2.123576] r8:c0f25548 r7:c470aa10 r6:c46bd7fc r5:c0f35e24 r4:00000001 <4>[ 2.130537] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.139582] r7:c470aa54 r6:c051db44 r5:c46bd7fc r4:00000000 <4>[ 2.145513] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.154037] r6:c470aa10 r5:00000001 r4:c470aa10 <4>[ 2.158918] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.167703] r7:00000000 r6:c470aa10 r5:c0f254f0 r4:c470aa10 <4>[ 2.173651] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.182533] [] (bus_probe_device) from [] (device_add+0x5d4/0x6f8) <4>[ 2.190701] r7:00000000 r6:c0f251e8 r5:00000000 r4:c470aa10 <4>[ 2.196631] [] (device_add) from [] (platform_device_add+0x190/0x1f8) <4>[ 2.205073] r9:c0e0b434 r8:c0e0b414 r7:05f5e100 r6:00000000 r5:00000000 r4:c470aa00 <4>[ 2.213082] [] (platform_device_add) from [] (platform_device_register_full+0xf0/0x124) <4>[ 2.223084] r9:05f5e0ff r8:2faf0800 r7:05f5e100 r6:c46bd8e0 r5:00000000 r4:c470aa00 <4>[ 2.231097] [] (platform_device_register_full) from [] (raspberrypi_cpufreq_probe+0x10c/0x198) <4>[ 2.241703] r7:05f5e100 r6:c0e08868 r5:00000000 r4:00000000 <4>[ 2.247622] [] (raspberrypi_cpufreq_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.257110] r9:c103178c r8:00000000 r7:c1031784 r6:c0f35f1c r5:c470a610 r4:00000000 <4>[ 2.265122] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.273652] r7:c1031784 r6:c0f35f1c r5:00000000 r4:c470a610 <4>[ 2.279573] [] (really_probe) from [] (driver_probe_device+0x194/0x1bc) <4>[ 2.288194] r10:c470b340 r9:00000000 r8:c470a410 r7:c470a610 r6:c46bda2c r5:c0f35f1c <4>[ 2.296292] r4:c470a610 <4>[ 2.299093] [] (driver_probe_device) from [] (__device_attach_driver+0xb8/0xf8) <4>[ 2.308401] r8:c470a410 r7:c470a610 r6:c46bda2c r5:c0f35f1c r4:00000001 <4>[ 2.315373] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.324419] r7:c470a654 r6:c051db44 r5:c46bda2c r4:00000000 <4>[ 2.330339] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.338863] r6:c470a610 r5:00000001 r4:c470a610 <4>[ 2.343754] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.352540] r7:00000000 r6:c470a610 r5:c0f254f0 r4:c470a610 <4>[ 2.358461] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.367339] [] (bus_probe_device) from [] (device_add+0x5d4/0x6f8) <4>[ 2.375517] r7:00000000 r6:c0f251e8 r5:00000000 r4:c470a610 <4>[ 2.381447] [] (device_add) from [] (platform_device_add+0x190/0x1f8) <4>[ 2.389878] r9:c0e0b434 r8:c0e0b414 r7:00000000 r6:00000000 r5:00000000 r4:c470a600 <4>[ 2.397893] [] (platform_device_add) from [] (platform_device_register_full+0xf0/0x124) <4>[ 2.407895] r9:c470a410 r8:c4705150 r7:00000000 r6:c46bdb18 r5:00000000 r4:c470a600 <4>[ 2.415912] [] (platform_device_register_full) from [] (raspberrypi_clk_probe+0x160/0x31c) <4>[ 2.426171] r7:00000000 r6:00000000 r5:c470b2c0 r4:00000000 <4>[ 2.432101] [] (raspberrypi_clk_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.441237] r10:00000003 r9:c103178c r8:00000000 r7:c1031784 r6:c0f1f68c r5:c470a410 <4>[ 2.449312] r4:00000000 <4>[ 2.452121] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.460637] r7:c1031784 r6:c0f1f68c r5:00000000 r4:c470a410 <4>[ 2.466567] [] (really_probe) from [] (driver_probe_device+0x194/0x1bc) <4>[ 2.475183] r10:00000003 r9:00000000 r8:c1594c10 r7:c470a410 r6:c46bdc6c r5:c0f1f68c <4>[ 2.483274] r4:c470a410 <4>[ 2.486075] [] (driver_probe_device) from [] (__device_attach_driver+0xb8/0xf8) <4>[ 2.495383] r8:c1594c10 r7:c470a410 r6:c46bdc6c r5:c0f1f68c r4:00000001 <4>[ 2.502359] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.511405] r7:c470a454 r6:c051db44 r5:c46bdc6c r4:00000000 <4>[ 2.517325] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.525849] r6:c470a410 r5:00000001 r4:c470a410 <4>[ 2.530730] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.539515] r7:00000000 r6:c470a410 r5:c0f254f0 r4:c470a410 <4>[ 2.545447] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.554324] [] (bus_probe_device) from [] (device_add+0x5d4/0x6f8) <4>[ 2.562502] r7:00000000 r6:c0f251e8 r5:00000000 r4:c470a410 <4>[ 2.568421] [] (device_add) from [] (platform_device_add+0x190/0x1f8) <4>[ 2.576862] r9:c0e0b434 r8:c0e0b414 r7:c1594c00 r6:00000000 r5:00000000 r4:c470a400 <4>[ 2.584873] [] (platform_device_add) from [] (platform_device_register_full+0xf0/0x124) <4>[ 2.594875] r9:c103178c r8:00000001 r7:c1594c00 r6:c46bdd58 r5:00000000 r4:c470a400 <4>[ 2.602889] [] (platform_device_register_full) from [] (rpi_firmware_probe+0x1a4/0x1ec) <4>[ 2.612892] r7:c1594c00 r6:c1594c10 r5:c4709300 r4:00000000 <4>[ 2.618811] [] (rpi_firmware_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.627685] r8:00000000 r7:c1031784 r6:c0f3783c r5:c1594c10 r4:00000000 <4>[ 2.634656] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.643182] r7:c1031784 r6:c0f3783c r5:00000000 r4:c1594c10 <4>[ 2.649103] [] (really_probe) from [] (driver_probe_device+0x194/0x1bc) <4>[ 2.657718] r10:c0f25444 r9:00000000 r8:00000000 r7:c1594c10 r6:c46bdea4 r5:c0f3783c <4>[ 2.665805] r4:c1594c10 <4>[ 2.668606] [] (driver_probe_device) from [] (__device_attach_driver+0xb8/0xf8) <4>[ 2.677913] r8:00000000 r7:c1594c10 r6:c46bdea4 r5:c0f3783c r4:00000001 <4>[ 2.684883] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.693932] r7:c1594c54 r6:c051db44 r5:c46bdea4 r4:00000000 <4>[ 2.699852] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.708377] r6:c1594c10 r5:00000001 r4:c1594c10 <4>[ 2.713268] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.722059] r7:eb9c7300 r6:c1594c10 r5:c0f254f0 r4:c1594c10 <4>[ 2.727980] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.736859] [] (bus_probe_device) from [] (deferred_probe_work_func+0xa8/0xcc) <4>[ 2.746079] r7:eb9c7300 r6:c0f25468 r5:c0f2542c r4:c1594c10 <4>[ 2.752011] [] (deferred_probe_work_func) from [] (process_one_work+0x194/0x274) <4>[ 2.761404] r7:eb9c7300 r6:c0e0d18c r5:c0f25440 r4:c46a1c80 <4>[ 2.767322] [] (process_one_work) from [] (worker_thread+0x220/0x2e4) <4>[ 2.775764] r10:c46a77a0 r9:c0f8fabc r8:c0e0d1a0 r7:c0edcaa0 r6:c0e0d18c r5:c46a1c94 <4>[ 2.783850] r4:c46a1c80 <4>[ 2.786653] [] (worker_thread) from [] (kthread+0x11c/0x128) <4>[ 2.794315] r9:c1531e98 r8:c46a1c80 r7:c0134f3c r6:c46bc000 r5:c469fcc0 r4:c46a7780 <4>[ 2.802327] [] (kthread) from [] (ret_from_fork+0x14/0x2c) <4>[ 2.809798] Exception stack(0xc46bdfb0 to 0xc46bdff8) <4>[ 2.815116] dfa0: 00000000 00000000 00000000 00000000 <4>[ 2.823555] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 <4>[ 2.831998] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 <4>[ 2.838868] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0139a40 <4>[ 2.846957] r4:c469fcc0 r3:00000001 <4>[ 2.850785] ---[ end trace 58996bc4bee07164 ]--- <6>[ 2.855706] sdhost-bcm2835 3f202000.mmc: loaded - DMA enabled (>1) <4>[ 2.864738] dwc2 3f980000.usb: supply vusb_d not found, using dummy regulator <4>[ 2.872390] dwc2 3f980000.usb: supply vusb_a not found, using dummy regulator <6>[ 2.931054] dwc2 3f980000.usb: DWC OTG Controller <6>[ 2.936054] dwc2 3f980000.usb: new USB bus registered, assigned bus number 1 <6>[ 2.943555] dwc2 3f980000.usb: irq 33, io mem 0x3f980000 <6>[ 2.950747] hub 1-0:1.0: USB hub found <6>[ 2.954933] hub 1-0:1.0: 1 port detected <4>[ 2.960896] vc4_hdmi 3f902000.hdmi: deferred probe timeout, ignoring dependency <4>[ 2.968579] vc4_hdmi: probe of 3f902000.hdmi failed with error -110 <4>[ 2.975477] vc4_vec 3f806000.vec: deferred probe timeout, ignoring dependency <4>[ 2.982952] vc4_vec: probe of 3f806000.vec failed with error -110 <4>[ 2.989539] vc4_v3d 3fc00000.v3d: deferred probe timeout, ignoring dependency <4>[ 2.997009] vc4_v3d: probe of 3fc00000.v3d failed with error -110 <4>[ 3.004368] OF: fdt: not creating '/sys/firmware/fdt': CRC check failed <4>[ 3.036475] mmc0: host does not support reading read-only switch, assuming write-enable <6>[ 3.047070] mmc0: new high speed SDHC card at address 0002 <6>[ 3.053909] mmcblk0: mmc0:0002 NCard 14.9 GiB <6>[ 3.061386] mmcblk0: p1 <6>[ 3.341027] usb 1-1: new high-speed USB device number 2 using dwc2 <6>[ 3.592092] hub 1-1:1.0: USB hub found <6>[ 3.596210] hub 1-1:1.0: 5 ports detected <6>[ 3.921027] usb 1-1.1: new high-speed USB device number 3 using dwc2 <6>[ 4.054310] smsc95xx v2.0.0 <6>[ 4.184613] SMSC LAN8700 usb-001:003:01: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=usb-001:003:01, irq=POLL) <6>[ 4.197159] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:d2:0e:1f <6>[ 4.265286] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup <6>[ 4.288715] smsc95xx 1-1.1:1.0 eth0: Link is Down <6>[ 4.301037] usb 1-1.3: new high-speed USB device number 4 using dwc2 <6>[ 4.437224] usb-storage 1-1.3:1.0: USB Mass Storage device detected <6>[ 4.444839] scsi host0: usb-storage 1-1.3:1.0 <5>[ 5.540564] scsi 0:0:0:0: Direct-Access Kingston DT 101 G2 PMAP PQ: 0 ANSI: 0 CCS <5>[ 5.891046] random: crng init done <5>[ 6.482611] sd 0:0:0:0: [sda] 7669824 512-byte logical blocks: (3.93 GB/3.66 GiB) <5>[ 6.490828] sd 0:0:0:0: [sda] Write Protect is off <3>[ 6.496459] sd 0:0:0:0: [sda] No Caching mode page found <3>[ 6.502081] sd 0:0:0:0: [sda] Assuming drive cache: write through <6>[ 6.541171] sda: sda1 sda2 <5>[ 6.547977] sd 0:0:0:0: [sda] Attached SCSI removable disk <6>[ 7.382622] smsc95xx 1-1.1:1.0 eth0: Link is Up - 100Mbps/Full - flow control off <6>[ 7.391193] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 7.421196] Sending DHCP requests .., OK <6>[ 10.045237] IP-Config: Got DHCP answer from 192.168.201.1, my address is 192.168.201.127 <6>[ 10.053613] IP-Config: Complete: <6>[ 10.057123] device=eth0, hwaddr=b8:27:eb:d2:0e:1f, ipaddr=192.168.201.127, mask=255.255.255.0, gw=192.168.201.1 <6>[ 10.067930] host=192.168.201.127, domain=lava-rack, nis-domain=(none) <6>[ 10.075089] bootserver=192.168.201.1, rootserver=192.168.201.1, rootpath= <6>[ 10.075096] nameserver0=192.168.201.1 <5>[ 10.087344] cfg80211: Loading compiled-in X.509 certificates for regulatory database <5>[ 10.117250] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' <4>[ 10.124602] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 <6>[ 10.133823] ALSA device list: <6>[ 10.137063] No soundcards found. <6>[ 10.141042] cfg80211: failed to load regulatory.db <6>[ 10.146323] uart-pl011 3f201000.serial: no DMA platform data <6>[ 10.159090] Freeing unused kernel memory: 1024K <6>[ 10.164261] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 10.394992] udevd[93]: starting version 3.2.9 <27>[ 10.414329] udevd[93]: specified user 'tss' unknown <27>[ 10.419833] udevd[93]: specified group 'tss' unknown <30>[ 10.431199] udevd[94]: starting eudev-3.2.9 <4>[ 10.786908] vchiq: module is from the staging directory, the quality is unknown, you have been warned. <6>[ 10.884243] bcm2835-rng 3f104000.rng: hwrng registered <3>[ 10.923816] bcm2835_vchiq 3f00b840.mailbox: failed to set channelbase <6>[ 10.930576] vchiq: could not load vchiq done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-10500323/environment . /lava-10500323/environment / # /lava-10500323/bin/lava-test-runner /lava-10500323/0 /lava-10500323/bin/lava-test-runner /lava-10500323/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-10500323/0/tests/0_dmesg + cat uuid + UUID=10500323_1.5.<8>[ 12.225385] 2.4.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 12.290853] <8>[ 12.350979] <8>[ 12.411308] + set +x <8>[ 12.423055] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-10500323/environment / # . /lava-10500323/environment/lava-10500323/bin/lava-test-runner /lava-10500323/1 / # /lava-10500323/bin/lava-test-runner /lava-10500323/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-10500323/1/tests/1_bootrr + cat uuid + UUID=10500323_1.5.<8>[ 12.950888] 2.4.5 + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-10500323/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-10500323/1/../bin/lava-test-case <8>[ 13.026012] /lava-10500323/1/../bin/lava-test-case <8>[ 13.080388] /lava-10500323/1/../bin/lava-test-case <8>[ 13.113695] + set +x <8>[ 13.138927] / #