[Enter `^Ec?' for help] U-Boot SPL 2015.10-00025-g943d444 (Feb 19 2016 - 15:04:45) U-Boot 2015.10-00025-g943d444 (Feb 19 2016 - 15:04:45 +0000) Model: Radxa Rock 2 Square DRAM: 2 GiB MMC: dwmmc@ff0c0000: 0, dwmmc@ff0f0000: 1 *** Warning - bad CRC, using default environment In: serial@ff690000 Out: serial@ff690000 Err: serial@ff690000 Incorrect eeprom header Net: Warning: ethernet@ff290000 (eth0) using random MAC address - 4a:25:f8:cd:b3:50 eth0: ethernet@ff290000 Hit any key to stop autoboot: 1  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp ethernet@ff290000 Waiting for PHY auto negotiation to complete...... done Speed: 1000, full duplex BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.201.186 (261 ms) => setenv serverip 192.168.201.1 setenv serverip 192.168.201.1 => tftp 0x2000000 10500439/tftp-deploy-fb8ckhsq/kernel/zImage tftp 0x2000000 10500439/tftp-deploy-fb8ckhsq/kernel/zImage Speed: 1000, full duplex Using ethernet@ff290000 device TFTP from server 192.168.201.1; our IP address is 192.168.201.186 Filename '10500439/tftp-deploy-fb8ckhsq/kernel/zImage'. Load address: 0x2000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ########### 3.6 MiB/s done Bytes transferred = 9699840 (940200 hex) => tftp 0x4000000 10500439/tftp-deploy-fb8ckhsq/ramdisk/ramdisk.cpio.gz.uboot tftp 0x4000000 10500439/tftp-deploy-fb8ckhsq/ramdisk/ramdisk.cpio.gz.uboot Speed: 1000, full duplex Using ethernet@ff290000 device TFTP from server 192.168.201.1; our IP address is 192.168.201.186 Filename '10500439/tftp-deploy-fb8ckhsq/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x4000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ####################################################### 3.6 MiB/s done Bytes transferred = 16064049 (f51e31 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x1f00000 10500439/tftp-deploy-fb8ckhsq/dtb/rk3288-rock2-square.dtb tftp 0x1f00000 10500439/tftp-deploy-fb8ckhsq/dtb/rk3288-rock2-square.dtb Speed: 1000, full duplex Using ethernet@ff290000 device TFTP from server 192.168.201.1; our IP address is 192.168.201.186 Filename '10500439/tftp-deploy-fb8ckhsq/dtb/rk3288-rock2-square.dtb'. Load address: 0x1f00000 Loading: *### 2.8 MiB/s done Bytes transferred = 41652 (a2b4 hex) => setenv bootargs 'console=ttyS2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' setenv bootargs 'console=ttyS2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' => bootz 0x2000000 0x4000000 0x1f00000 bootz 0x2000000 0x4000000 0x1f00000 Kernel image @ 0x2000000 [ 0x000000 - 0x940200 ] ## Loading init Ramdisk from Legacy Image at 04000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 16063985 Bytes = 15.3 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 01f00000 Booting using the fdt blob at 0x1f00000 Using Device Tree in place at 01f00000, end 01f0d2b3 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x500 [ 0.000000] Linux version 5.10.180-cip33 (KernelCI@build-j1578061-arm-gcc-10-multi-v7-defconfig-zqrdm) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Sun May 28 23:17:23 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Radxa Rock 2 Square [ 0.000000] earlycon: uart0 at MMIO32 0xff690000 (options '115200n8') [ 0.000000] printk: bootconsole [uart0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000030000000-0x000000007fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] percpu: Embedded 20 pages/cpu s49868 r8192 d23860 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752 [ 0.000000] Kernel command line: console=ttyS2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 1973048K/2097152K available (14336K kernel code, 2237K rwdata, 5348K rodata, 2048K init, 426K bss, 58568K reserved, 65536K cma-reserved, 1245184K highmem) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). <6>[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns <6>[ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns <6>[ 0.009083] Switching to timer-based delay loop, resolution 41ns <6>[ 0.022958] Console: colour dummy device 80x30 <6>[ 0.028161] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) <6>[ 0.039832] pid_max: default: 32768 minimum: 301 <6>[ 0.045339] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.053672] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.063128] CPU: Testing write buffer coherency: ok <6>[ 0.068814] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.074886] CPU0: thread -1, cpu 0, socket 5, mpidr 80000500 <6>[ 0.082292] Setting up static identity map for 0x300000 - 0x3000ac <6>[ 0.091394] rcu: Hierarchical SRCU implementation. <6>[ 0.101828] EFI services will not be available. <6>[ 0.107396] smp: Bringing up secondary CPUs ... <6>[ 0.114408] CPU1: thread -1, cpu 1, socket 5, mpidr 80000501 <6>[ 0.114417] CPU1: Spectre v2: using BPIALL workaround <6>[ 0.128688] CPU2: thread -1, cpu 2, socket 5, mpidr 80000502 <6>[ 0.128697] CPU2: Spectre v2: using BPIALL workaround <6>[ 0.142906] CPU3: thread -1, cpu 3, socket 5, mpidr 80000503 <6>[ 0.142915] CPU3: Spectre v2: using BPIALL workaround <6>[ 0.155388] smp: Brought up 1 node, 4 CPUs <6>[ 0.160200] SMP: Total of 4 processors activated (192.00 BogoMIPS). <6>[ 0.167362] CPU: All CPU(s) started in SVC mode. <6>[ 0.173348] devtmpfs: initialized <6>[ 0.186759] VFP support v0.3: implementor 41 architecture 3 part 30 variant d rev 0 <6>[ 0.195718] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.206831] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) <6>[ 0.216514] pinctrl core: initialized pinctrl subsystem <6>[ 0.224570] DMI not present or invalid. <6>[ 0.229910] NET: Registered protocol family 16 <6>[ 0.237451] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.247931] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.248455] cpuidle: using governor menu <6>[ 0.260502] No ATAGs? <6>[ 0.263421] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. <6>[ 0.272520] hw-breakpoint: maximum watchpoint size is 4 bytes. <6>[ 0.282656] Serial: AMBA PL011 UART driver <6>[ 0.387914] iommu: Default domain type: Translated <6>[ 0.395130] vgaarb: loaded <5>[ 0.399384] SCSI subsystem initialized <6>[ 0.404247] usbcore: registered new interface driver usbfs <6>[ 0.410622] usbcore: registered new interface driver hub <6>[ 0.416779] usbcore: registered new device driver usb <6>[ 0.424507] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.430243] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.440586] PTP clock support registered <6>[ 0.448547] clocksource: Switched to clocksource arch_sys_counter <6>[ 1.815057] NET: Registered protocol family 2 <6>[ 1.820405] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 1.830236] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) <6>[ 1.839758] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 1.848658] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 1.856957] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 1.864349] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 1.871964] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 1.880197] NET: Registered protocol family 1 <6>[ 1.885828] RPC: Registered named UNIX socket transport module. <6>[ 1.892659] RPC: Registered udp transport module. <6>[ 1.898112] RPC: Registered tcp transport module. <6>[ 1.903582] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 1.910960] PCI: CLS 0 bytes, default 64 <6>[ 1.915965] Trying to unpack rootfs image as initramfs... <6>[ 3.462927] Freeing initrd memory: 15688K <6>[ 3.468485] hw perfevents: enabled with armv7_cortex_a12 PMU driver, 7 counters available <5>[ 3.479351] Initialise system trusted keyrings <6>[ 3.484772] workingset: timestamp_bits=30 max_order=19 bucket_order=0 <6>[ 3.498784] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 3.506228] NFS: Registering the id_resolver key type <5>[ 3.512129] Key type id_resolver registered <5>[ 3.517006] Key type id_legacy registered <6>[ 3.521823] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 3.529500] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <6>[ 3.537937] ntfs: driver 2.1.32 [Flags: R/O]. <5>[ 3.543484] Key type asymmetric registered <5>[ 3.548269] Asymmetric key parser 'x509' registered <6>[ 3.553988] bounce: pool size: 64 pages <6>[ 3.558532] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) <6>[ 3.566938] io scheduler mq-deadline registered <6>[ 3.572213] io scheduler kyber registered <6>[ 3.616757] dma-pl330 ff250000.dma-controller: Loaded driver for PL330 DMAC-241330 <6>[ 3.625403] dma-pl330 ff250000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16 <6>[ 3.636624] dma-pl330 ffb20000.dma-controller: Loaded driver for PL330 DMAC-241330 <6>[ 3.645248] dma-pl330 ffb20000.dma-controller: DBUFF-64x8bytes Num_Chans-5 Num_Peri-6 Num_Events-10 <6>[ 3.726661] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled <6>[ 3.736986] printk: console [ttyS2] disabled <6>[ 3.742060] ff690000.serial: ttyS2 at MMIO 0xff690000 (irq = 43, base_baud = 1500000) is a 16550A <6>[ 3.752256] printk: console [ttyS2] enabled <6>[ 3.752256] printk: console [ttyS2] enabled <6>[ 3.762214] printk: bootconsole [uart0] disabled <6>[ 3.762214] printk: bootconsole [uart0] disabled <6>[ 3.775930] SuperH (H)SCI(F) driver initialized <6>[ 3.782811] msm_serial: driver initialized <6>[ 3.787933] STMicroelectronics ASC driver initialized <6>[ 3.795823] STM32 USART driver initialized <6>[ 3.820513] brd: module loaded <6>[ 3.832451] loop: module loaded <6>[ 3.851941] CAN device driver interface <6>[ 3.857849] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded <6>[ 3.866140] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 3.872017] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 3.879015] igb: Intel(R) Gigabit Ethernet Network Driver <6>[ 3.885334] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 3.895493] rk_gmac-dwmac ff290000.ethernet: IRQ eth_lpi not found <6>[ 3.902842] rk_gmac-dwmac ff290000.ethernet: PTP uses main clock <6>[ 3.913359] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver <6>[ 3.922020] usbcore: registered new interface driver pegasus <6>[ 3.928716] usbcore: registered new interface driver asix <6>[ 3.935083] usbcore: registered new interface driver ax88179_178a <6>[ 3.942266] usbcore: registered new interface driver cdc_ether <6>[ 3.949155] usbcore: registered new interface driver smsc75xx <6>[ 3.955918] usbcore: registered new interface driver smsc95xx <6>[ 3.962697] usbcore: registered new interface driver net1080 <6>[ 3.969392] usbcore: registered new interface driver cdc_subset <6>[ 3.976338] usbcore: registered new interface driver zaurus <6>[ 3.982969] usbcore: registered new interface driver cdc_ncm <4>[ 3.992653] dwc2 ff540000.usb: supply vusb_d not found, using dummy regulator <4>[ 4.001110] dwc2 ff540000.usb: supply vusb_a not found, using dummy regulator <6>[ 4.078865] dwc2 ff540000.usb: DWC OTG Controller <6>[ 4.084443] dwc2 ff540000.usb: new USB bus registered, assigned bus number 1 <6>[ 4.092681] dwc2 ff540000.usb: irq 48, io mem 0xff540000 <6>[ 4.099712] hub 1-0:1.0: USB hub found <6>[ 4.104246] hub 1-0:1.0: 1 port detected <4>[ 4.109733] dwc2 ff580000.usb: supply vusb_d not found, using dummy regulator <4>[ 4.118160] dwc2 ff580000.usb: supply vusb_a not found, using dummy regulator <6>[ 4.268613] dwc2 ff580000.usb: EPs: 10, dedicated fifos, 972 entries in SPRAM <6>[ 4.277160] dwc2 ff580000.usb: DWC OTG Controller <6>[ 4.282771] dwc2 ff580000.usb: new USB bus registered, assigned bus number 2 <6>[ 4.290994] dwc2 ff580000.usb: irq 49, io mem 0xff580000 <6>[ 4.297963] hub 2-0:1.0: USB hub found <6>[ 4.302517] hub 2-0:1.0: 1 port detected <6>[ 4.308835] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>[ 4.316431] ehci-pci: EHCI PCI platform driver <6>[ 4.321767] ehci-platform: EHCI generic platform driver <6>[ 4.328229] ehci-platform ff500000.usb: EHCI Host Controller <6>[ 4.334911] ehci-platform ff500000.usb: new USB bus registered, assigned bus number 3 <6>[ 4.344355] ehci-platform ff500000.usb: irq 47, io mem 0xff500000 <6>[ 4.378541] ehci-platform ff500000.usb: USB 2.0 started, EHCI 1.00 <6>[ 4.386493] hub 3-0:1.0: USB hub found <6>[ 4.391049] hub 3-0:1.0: 1 port detected <6>[ 4.396522] ehci-orion: EHCI orion driver <6>[ 4.401569] SPEAr-ehci: EHCI SPEAr driver <6>[ 4.406536] ehci-st: EHCI STMicroelectronics driver <6>[ 4.412509] ehci-exynos: EHCI Exynos driver <6>[ 4.417666] ehci-atmel: EHCI Atmel driver <6>[ 4.422658] tegra-ehci: Tegra EHCI driver <6>[ 4.427655] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver <6>[ 4.434938] ohci-pci: OHCI PCI platform driver <6>[ 4.440278] ohci-platform: OHCI generic platform driver <6>[ 4.446669] SPEAr-ohci: OHCI SPEAr driver <6>[ 4.451661] ohci-st: OHCI STMicroelectronics driver <6>[ 4.457597] ohci-atmel: OHCI Atmel driver <6>[ 4.463548] usbcore: registered new interface driver usb-storage <6>[ 4.478138] i2c /dev entries driver <6>[ 4.488667] VCC_DDR: supplied by vcc_sys <6>[ 4.495647] VCC_IO: supplied by vcc_sys <6>[ 4.502509] VDD_LOG: Bringing 1100000uV into 1000000-1000000uV <6>[ 4.511721] VDD_LOG: supplied by vcc_sys <6>[ 4.518714] VCC_20: supplied by vcc_sys <6>[ 4.525572] VCCIO_SD: supplied by VCC_IO <6>[ 4.533085] VDD10_LCD: supplied by VCC_IO <6>[ 4.541013] VCCA_CODEC: supplied by VCC_IO <6>[ 4.549088] VCCA_TP: supplied by vcc_sys <6>[ 4.556425] VCCIO_PMU: supplied by vcc_sys <6>[ 4.563612] VDD_10: supplied by VCC_20 <6>[ 4.570925] VCC_18: supplied by VCC_20 <6>[ 4.578214] VCC18_LCD: supplied by VCC_20 <6>[ 4.587320] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected! <6>[ 4.596711] vdd_cpu: supplied by vcc_sys <6>[ 4.604053] vcc_flash: supplied by VCC_IO <6>[ 4.609436] vcc_sd: supplied by VCC_IO <6>[ 4.616210] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected! <6>[ 4.625616] vdd_gpu: supplied by vcc_sys <4>[ 4.648717] dw_wdt ff800000.watchdog: No valid TOPs array specified <6>[ 4.665192] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 500000 KHz, changing to: 600000 KHz <6>[ 4.679660] sdhci: Secure Digital Host Controller Interface driver <6>[ 4.686859] sdhci: Copyright(c) Pierre Ossman <6>[ 4.692843] Synopsys Designware Multimedia Card Interface Driver <6>[ 4.700324] dwmmc_rockchip ff0c0000.mmc: IDMAC supports 32-bit address mode. <6>[ 4.700484] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 4.708525] dwmmc_rockchip ff0c0000.mmc: Using internal DMA controller. <6>[ 4.716801] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 4.722794] dwmmc_rockchip ff0c0000.mmc: Version ID is 270a <6>[ 4.723063] dwmmc_rockchip ff0f0000.mmc: IDMAC supports 32-bit address mode. <6>[ 4.723084] dwmmc_rockchip ff0f0000.mmc: Using internal DMA controller. <6>[ 4.723090] dwmmc_rockchip ff0f0000.mmc: Version ID is 270a <6>[ 4.723110] dwmmc_rockchip ff0f0000.mmc: DW MMC controller at irq 40,32 bit host data width,256 deep fifo <6>[ 4.730974] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 4.737483] dwmmc_rockchip ff0c0000.mmc: DW MMC controller at irq 38,32 bit host data width,256 deep fifo <6>[ 4.745643] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 4.745751] dwmmc_rockchip ff0f0000.mmc: allocated mmc-pwrseq <6>[ 4.745754] mmc_host mmc0: card is non-removable. <6>[ 4.753428] usb 3-1: new high-speed USB device number 2 using ehci-platform <6>[ 4.759863] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 39,32 bit host data width,256 deep fifo <6>[ 4.770830] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 4.772425] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) <6>[ 4.791122] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) <6>[ 4.796374] usbcore: registered new interface driver usbhid <6>[ 4.862005] usbhid: USB HID core driver <6>[ 4.866543] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) <6>[ 4.868485] NET: Registered protocol family 10 <6>[ 4.879008] mmc0: new high speed MMC card at address 0001 <6>[ 4.889486] Segment Routing with IPv6 <6>[ 4.893892] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 4.898686] mmcblk0: mmc0:0001 032GE4 29.1 GiB <6>[ 4.901037] NET: Registered protocol family 17 <6>[ 4.906309] mmcblk0boot0: mmc0:0001 032GE4 partition 1 4.00 MiB <6>[ 4.911413] can: controller area network core <6>[ 4.918512] mmcblk0boot1: mmc0:0001 032GE4 partition 2 4.00 MiB <6>[ 4.923495] NET: Registered protocol family 29 <6>[ 4.935619] can: raw protocol <6>[ 4.935821] mmcblk0rpmb: mmc0:0001 032GE4 partition 3 4.00 MiB, chardev (235:0) <6>[ 4.939229] can: broadcast manager protocol <6>[ 4.950812] mmcblk0: p1 p2 <6>[ 4.952654] can: netlink gateway - max_hops=1 <5>[ 4.961430] Key type dns_resolver registered <6>[ 4.966527] ThumbEE CPU extension supported. <5>[ 4.971603] Registering SWP/SWPB emulation handler <5>[ 4.977461] Loading compiled-in X.509 certificates <6>[ 4.980442] hub 3-1:1.0: USB hub found <6>[ 4.987903] hub 3-1:1.0: 4 ports detected <6>[ 5.005138] rk_gmac-dwmac ff290000.ethernet: IRQ eth_lpi not found <6>[ 5.012458] rk_gmac-dwmac ff290000.ethernet: PTP uses main clock <6>[ 5.020540] rk_gmac-dwmac ff290000.ethernet: clock input or output? (input). <6>[ 5.028739] rk_gmac-dwmac ff290000.ethernet: TX delay(0x30). <6>[ 5.035359] rk_gmac-dwmac ff290000.ethernet: RX delay(0x10). <6>[ 5.041980] rk_gmac-dwmac ff290000.ethernet: integrated PHY? (no). <3>[ 5.049223] rk_gmac-dwmac ff290000.ethernet: cannot get clock clk_mac_speed <6>[ 5.057298] rk_gmac-dwmac ff290000.ethernet: clock input from PHY <6>[ 5.069416] rk_gmac-dwmac ff290000.ethernet: init for RGMII <6>[ 5.076141] rk_gmac-dwmac ff290000.ethernet: User ID: 0x10, Synopsys ID: 0x35 <6>[ 5.084427] rk_gmac-dwmac ff290000.ethernet: DWMAC1000 <6>[ 5.090574] rk_gmac-dwmac ff290000.ethernet: DMA HW capability register supported <6>[ 5.099250] rk_gmac-dwmac ff290000.ethernet: RX Checksum Offload Engine supported <6>[ 5.107918] rk_gmac-dwmac ff290000.ethernet: COE Type 2 <6>[ 5.114067] rk_gmac-dwmac ff290000.ethernet: TX Checksum insertion supported <6>[ 5.122259] rk_gmac-dwmac ff290000.ethernet: Wake-Up On Lan supported <6>[ 5.129810] rk_gmac-dwmac ff290000.ethernet: Normal descriptors <6>[ 5.136722] rk_gmac-dwmac ff290000.ethernet: Ring mode enabled <6>[ 5.143543] rk_gmac-dwmac ff290000.ethernet: Enable RX Mitigation via HW Watchdog Timer <6>[ 5.152809] rk_gmac-dwmac ff290000.ethernet: device MAC address f6:2e:1d:4a:c2:8d <6>[ 5.291380] RTL8211E Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:00, irq=POLL) <6>[ 5.305691] RTL8211E Gigabit Ethernet stmmac-0:01: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:01, irq=POLL) <3>[ 5.325270] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present! <6>[ 5.325386] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <3>[ 5.334348] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present! <3>[ 5.351565] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present! <6>[ 5.361178] input: gpio-keys as /devices/platform/gpio-keys/input/input0 <6>[ 5.368543] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 5.376643] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 5.383183] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 39,32 bit host data width,256 deep fifo <6>[ 5.396897] rk_gmac-dwmac ff290000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211E Gigabit Ethernet] (irq=POLL) <6>[ 5.410174] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 5.418355] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 5.426052] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 5.428504] rk_gmac-dwmac ff290000.ethernet eth0: No Safety Features support found <6>[ 5.432582] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 39,32 bit host data width,256 deep fifo <4>[ 5.441319] rk_gmac-dwmac ff290000.ethernet eth0: PTP not supported by HW <6>[ 5.460375] rk_gmac-dwmac ff290000.ethernet eth0: configuring for phy/rgmii link mode <6>[ 8.619895] rk_gmac-dwmac ff290000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off <6>[ 8.649383] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 8.678610] Sending DHCP requests .., OK <6>[ 14.723636] IP-Config: Got DHCP answer from 192.168.201.1, my address is 192.168.201.203 <6>[ 14.733109] IP-Config: Complete: <6>[ 14.737070] device=eth0, hwaddr=f6:2e:1d:4a:c2:8d, ipaddr=192.168.201.203, mask=255.255.255.0, gw=192.168.201.1 <6>[ 14.749278] host=192.168.201.203, domain=lava-rack, nis-domain=(none) <6>[ 14.757304] bootserver=192.168.201.1, rootserver=192.168.201.1, rootpath= <6>[ 14.757329] nameserver0=192.168.201.1 <4>[ 14.774126] dw-apb-uart ff690000.serial: forbid DMA for kernel console <6>[ 14.787053] Freeing unused kernel memory: 2048K <6>[ 14.808956] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 14.873768] udevd[120]: starting version 3.2.9 <5>[ 14.879696] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 14.887319] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 14.895011] random: udevd: uninitialized urandom read (16 bytes read) <27>[ 14.906752] udevd[120]: specified user 'tss' unknown <27>[ 14.912751] udevd[120]: specified group 'tss' unknown <30>[ 14.919502] udevd[121]: starting eudev-3.2.9 <6>[ 15.071615] rockchip-vop ff930000.vop: Adding to iommu group 0 <6>[ 15.078742] rockchip-vop ff940000.vop: Adding to iommu group 1 <6>[ 15.089794] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 15.123282] rockchip-drm display-subsystem: bound ff930000.vop (ops vop_component_ops [rockchipdrm]) <6>[ 15.134031] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 15.141740] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 15.148272] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 39,32 bit host data width,256 deep fifo <6>[ 15.185940] rockchip-drm display-subsystem: bound ff940000.vop (ops vop_component_ops [rockchipdrm]) <6>[ 15.196589] dwhdmi-rockchip ff980000.hdmi: Detected HDMI TX controller v2.00a with HDCP (DWC MHL PHY) <6>[ 15.218022] rockchip-drm display-subsystem: bound ff980000.hdmi (ops dw_hdmi_rockchip_ops [rockchipdrm]) <6>[ 15.243752] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes <4>[ 15.245241] rtc-hym8563 0-0051: no valid clock/calendar values available <6>[ 15.249059] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 15.268329] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 15.268419] rtc-hym8563 0-0051: registered as rtc0 <6>[ 15.275882] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0 <6>[ 15.276038] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <4>[ 15.282793] rtc-hym8563 0-0051: no valid clock/calendar values available <6>[ 15.290834] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 39,32 bit host data width,256 deep fifo <3>[ 15.316147] rtc-hym8563 0-0051: hctosys: unable to read the hardware clock <6>[ 15.351851] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 15.360274] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 15.367960] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 15.374506] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 39,32 bit host data width,256 deep fifo <6>[ 15.386989] dwmmc_rockchip ff0d0000.mmc: allocated mmc-pwrseq <6>[ 15.393738] mmc_host mmc2: card is non-removable. <6>[ 15.415332] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) <6>[ 15.440089] panfrost ffa30000.gpu: clock rate = 400000000 <6>[ 15.441248] rk3288-crypto ff8a0000.crypto: will run requests pump with realtime priority <6>[ 15.461052] rk3288-crypto ff8a0000.crypto: Crypto Accelerator successfully registered <6>[ 15.461115] panfrost ffa30000.gpu: mali-t760 id 0x750 major 0x0 minor 0x0 status 0x1 <6>[ 15.479083] panfrost ffa30000.gpu: features: 00000000,100277bf, issues: 00000000,24040400 <6>[ 15.488532] panfrost ffa30000.gpu: Features: L2:0x07120206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7 <6>[ 15.502064] panfrost ffa30000.gpu: shader_present=0xf l2_present=0x1 <6>[ 15.510224] [drm] Initialized panfrost 1.1.0 20180908 for ffa30000.gpu on minor 1 <4>[ 15.525763] mmc2: queuing unknown CIS tuple 0x80 (2 bytes) <4>[ 15.533751] mmc2: queuing unknown CIS tuple 0x80 (3 bytes) <4>[ 15.541714] mmc2: queuing unknown CIS tuple 0x80 (3 bytes) done <4>[ 15.550889] mmc2: queuing unknown CIS tuple 0x80 (7 bytes) Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # <6>[ 15.612068] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) <6>[ 15.627448] mmc2: new high speed SDIO card at address 0001 <5>[ 15.653471] cfg80211: Loading compiled-in X.509 certificates for regulatory database <5>[ 15.687031] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' <4>[ 15.694723] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 <6>[ 15.704672] cfg80211: failed to load regulatory.db <6>[ 15.708742] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4339-sdio for chip BCM4339/2 <4>[ 15.720293] brcmfmac mmc2:0001:1: Direct firmware load for brcm/brcmfmac4339-sdio.bin failed with error -2 / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-10500439/environment . /lava-10500439/environment / # /lava-10500439/bin/lava-test-runner /lava-10500439/0 /lava-10500439/bin/lava-test-runner /lava-10500439/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-10500439/0/tests/0_dmesg<8>[ 16.219636] + cat uuid + UUID=10500439_1.5.2.4.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 16.250616] <8>[ 16.273992] <8>[ 16.296939] <6>[ 16.306668] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes + set +x <8>[ 16.315869] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-10500439/environment / # . /lava-10500439/environment/lava-10500439/bin/lava-test-runner /lava-10500439/1 / # /lava-10500439/bin/lava-test-runner /lava-10500439/1<3>[ 16.739885] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50 + export 'TESTRUN_ID=1_bootrr' + cd /lava-10500439/1/tests/1_bootrr + cat uuid + UUID=10500439_<8>[ 16.789343] 1.5.2.4.5 + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-10500439/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-10500439/1/../bin/lava-test-case <8>[ 16.823332] /lava-10500439/1/../bin/lava-test-case <8>[ 16.849030] /lava-10500439/1/../bin/lava-test-case <8>[ 16.865033] /lava-10500439/1/../bin/lava-test-case <8>[ 16.890193] /lava-10500439/1/../bin/lava-test-case <8>[ 16.912390] /lava-10500439/1/../bin/lava-test-case <8>[ 16.931013] /lava-10500439/1/../bin/lava-test-case <8>[ 16.953741] /lava-10500439/1/../bin/lava-test-case <8>[ 16.973335] /lava-10500439/1/../bin/lava-test-case <8>[ 16.994545] + set +x <8>[ 17.003309] / #