connecting to NetworkSerialPort(target=Target(name='imx53-qsrb-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4010, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4010 connected to 10.8.254.5 (port 4010) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2023.01.0 #1 Fri Jan 27 16:21:21 CET 2023 Board: Freescale i.MX53 Quick Start-R Board detected i.MX53 revision 2.1 mc13xxx-i2c mc347080: Found MC34708 ID: 0x014 mdio_bus: miibus0: probed eth0: got preset MAC address: 00:04:9f:02:71:b3 imx-usb 53f80200.usb@53f80200.of: USB EHCI 1.00 imx-esdhc 50004000.mmc@50004000.of: registered as mmc0 imx-esdhc 50020000.mmc@50020000.of: registered as mmc2 imx-ipuv3 18000000.ipu@18000000.of: IPUv3M probed netconsole: registered as netconsole-1 malloc space: 0xbfe7d3c0 -> 0xcfcfa77f (size 254.5 MiB) mmc0: detected SD card version 2.0 mmc0: registered mmc0 MCIMX53-START-R board 1.0 rev B envfs: no envfs (magic mismatch) - envfs never written? [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mFreescale i.MX53 Quick Start-R Board:/[0m bootm -v -r /mnt/tftp/967478/tftp-deploy-zaj7ihio/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/967478/tftp-deploy-zaj7ihio/dtb/imx53-qsrb.dtb /mnt/tftp/967478/tftp-deploy-zaj7ihio/kernel/zImage [1;32mbarebox@[1;36mFreescale i.MX53 Quick Start-R Board:/[0m bootm -v -r /mnt/tftp/967478/tftp-deploy-zaj7ihio/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/967478/tftp-deploy-zaj7ihio/dtb/imx53-qsrb.dtb /mnt/tftp/967478/tftp-deploy-zaj7ihio/kernel/zImage eth0: 100Mbps full duplex link detected T eth0: DHCP client bound to address 10.8.254.196 Loading ARM Linux zImage '/mnt/tftp/967478/tftp-deploy-zaj7ihio/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x73259000 no initrd load address, defaulting to 0x78000000 Loaded initrd GZIP compressed '/mnt/tftp/967478/tftp-deploy-zaj7ihio/ramdisk/ramdisk.cpio.gz' initrd is at 0x78000000-0x789b7ad9 Loading devicetree from '/mnt/tftp/967478/tftp-deploy-zaj7ihio/dtb/imx53-qsrb.dtb' commandline: console=ttymxc0,115200n8 Starting kernel at 0x73259000, initrd at 0x78000000, oftree at 0x789b8000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.180-cip34 (KernelCI@build-j1608615-arm-gcc-10-imx-v6-v7-defconfig-xh45r) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Mon Jun 5 09:47:18 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [412fc085] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Freescale i.MX53 Quick Start-R Board [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 64 MiB at 0xca000000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000070000000-0x000000008fffffff] [ 0.000000] HighMem [mem 0x0000000090000000-0x00000000cfffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000070000000-0x000000008fffffff] [ 0.000000] node 0: [mem 0x00000000b0000000-0x00000000cfffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000070000000-0x00000000cfffffff] [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] percpu: Embedded 20 pages/cpu s51948 r8192 d21780 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 261120 [ 0.000000] Kernel command line: console=ttymxc0,115200n8 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 932968K/1048576K available (14336K kernel code, 2025K rwdata, 4848K rodata, 1024K init, 6662K bss, 50072K reserved, 65536K cma-reserved, 457624K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Running RCU self tests [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU lockdep checking is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] TrustZone Interrupt Controller (TZIC) initialized [ 0.000000] CPU identified as i.MX53, silicon rev 2.1 [ 0.000000] Switching to timer-based delay loop, resolution 25ns [ 0.000010] sched_clock: 32 bits at 40MHz, resolution 25ns, wraps every 53687091187ns [ 0.000043] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 47781511156 ns [ 0.001572] Console: colour dummy device 80x30 [ 0.001638] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001661] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001682] ... MAX_LOCK_DEPTH: 48 [ 0.001702] ... MAX_LOCKDEP_KEYS: 8192 [ 0.001723] ... CLASSHASH_SIZE: 4096 [ 0.001743] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001763] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001783] ... CHAINHASH_SIZE: 32768 [ 0.001803] memory used by lock dependency info: 4061 kB [ 0.001823] memory used for stack traces: 2112 kB [ 0.001844] per task-struct memory footprint: 1536 bytes [ 0.001985] Calibrating delay loop (skipped), value calculated using timer frequency.. 80.00 BogoMIPS (lpj=400000) [ 0.002038] pid_max: default: 32768 minimum: 301 [ 0.002450] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.002490] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.006075] CPU: Testing write buffer coherency: ok [ 0.006239] CPU0: Spectre v2: using BPIALL workaround [ 0.007305] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.010078] Setting up static identity map for 0x70100000 - 0x70100078 [ 0.011178] rcu: Hierarchical SRCU implementation. [ 0.013036] smp: Bringing up secondary CPUs ... [ 0.013080] smp: Brought up 1 node, 1 CPU [ 0.013105] SMP: Total of 1 processors activated (80.00 BogoMIPS). [ 0.013128] CPU: All CPU(s) started in SVC mode. [ 0.015782] devtmpfs: initialized [ 0.044181] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2 [ 0.045291] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.045382] futex hash table entries: 256 (order: 2, 16384 bytes, linear) [ 0.050893] pinctrl core: initialized pinctrl subsystem [ 0.057445] NET: Registered protocol family 16 [ 0.080742] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.095280] thermal_sys: Registered thermal governor 'step_wise' [ 0.095590] cpuidle: using governor menu [ 0.096500] No ATAGs? [ 0.096544] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.154571] imx53-pinctrl 53fa8000.iomuxc: initialized IMX pinctrl driver [ 0.256994] vgaarb: loaded [ 0.259253] SCSI subsystem initialized [ 0.261224] usbcore: registered new interface driver usbfs [ 0.261501] usbcore: registered new interface driver hub [ 0.261665] usbcore: registered new device driver usb [ 0.262120] usb_phy_generic usbphy-0: supply vcc not found, using dummy regulator [ 0.263383] usb_phy_generic usbphy-0: dummy supplies not allowed for exclusive requests [ 0.264220] usb_phy_generic usbphy-1: supply vcc not found, using dummy regulator [ 0.264816] usb_phy_generic usbphy-1: dummy supplies not allowed for exclusive requests [ 0.269944] i2c i2c-1: IMX I2C adapter registered [ 0.285236] mc13xxx 0-0008: mc34708: rev 2.4, fin: 0, fab: 0 [ 0.368997] i2c i2c-0: IMX I2C adapter registered [ 0.370252] mc: Linux media interface: v0.10 [ 0.370405] videodev: Linux video capture interface: v2.00 [ 0.371142] pps_core: LinuxPPS API ver. 1 registered [ 0.371174] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.371246] PTP clock support registered [ 0.373033] Advanced Linux Sound Architecture Driver Initialized. [ 0.378199] Bluetooth: Core ver 2.22 [ 0.378406] NET: Registered protocol family 31 [ 0.378436] Bluetooth: HCI device and connection manager initialized [ 0.378599] Bluetooth: HCI socket layer initialized [ 0.378647] Bluetooth: L2CAP socket layer initialized [ 0.378824] Bluetooth: SCO socket layer initialized [ 0.382029] clocksource: Switched to clocksource mxc_timer1 [ 1.578835] VFS: Disk quotas dquot_6.6.0 [ 1.579041] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.609057] NET: Registered protocol family 2 [ 1.609694] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.612572] tcp_listen_portaddr_hash hash table entries: 256 (order: 1, 11264 bytes, linear) [ 1.612705] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 1.612810] TCP bind hash table entries: 4096 (order: 5, 163840 bytes, linear) [ 1.613466] TCP: Hash tables configured (established 4096 bind 4096) [ 1.614106] UDP hash table entries: 256 (order: 2, 24576 bytes, linear) [ 1.614246] UDP-Lite hash table entries: 256 (order: 2, 24576 bytes, linear) [ 1.614783] NET: Registered protocol family 1 [ 1.617905] RPC: Registered named UNIX socket transport module. [ 1.618014] RPC: Registered udp transport module. [ 1.618040] RPC: Registered tcp transport module. [ 1.618063] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.620288] PCI: CLS 0 bytes, default 64 [ 1.622342] Trying to unpack rootfs image as initramfs... [ 2.673374] Freeing initrd memory: 9952K [ 2.675984] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 2.680489] Initialise system trusted keyrings [ 2.681552] workingset: timestamp_bits=30 max_order=18 bucket_order=0 [ 2.704354] NFS: Registering the id_resolver key type [ 2.704634] Key type id_resolver registered [ 2.704734] Key type id_legacy registered [ 2.705082] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 2.705220] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 2.705429] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 2.707320] fuse: init (API version 7.32) [ 2.794272] Key type asymmetric registered [ 2.794569] Asymmetric key parser 'x509' registered [ 2.794900] bounce: pool size: 64 pages [ 2.795073] io scheduler mq-deadline registered [ 2.795108] io scheduler kyber registered [ 2.816357] imx-sdma 63fb0000.sdma: Direct firmware load for imx/sdma/sdma-imx53.bin failed with error -2 [ 2.816484] imx-sdma 63fb0000.sdma: Falling back to sysfs fallback for: imx/sdma/sdma-imx53.bin [ 2.823618] 53fbc000.serial: ttymxc0 at MMIO 0x53fbc000 (irq = 47, base_baud = 4166666) is a IMX [ 3.622834] printk: console [ttymxc0] enabled [ 3.641595] [drm] using 16m VRAM carveout [ 3.698069] msm msm: [drm:msm_drm_bind] VRAM: ca100000->cb100000 [ 3.704320] adreno 30000000.gpu: Could not find a clock rate. Using a reasonable default [ 3.713337] adreno 30000000.gpu: supply vdd not found, using dummy regulator [ 3.721722] adreno 30000000.gpu: supply vddcx not found, using dummy regulator [ 3.732974] msm msm: bound 30000000.gpu (ops a3xx_ops) [ 3.742925] [drm] Initialized msm 1.6.0 20130625 for msm on minor 0 [ 3.757869] seiko_panel panel: supply dvdd not found, using dummy regulator [ 3.765743] seiko_panel panel: supply avdd not found, using dummy regulator [ 3.784285] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_crtc_ops) [ 3.792378] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_crtc_ops) [ 3.802681] imx-drm display-subsystem: bound 63ff0000.tve (ops imx_tve_ops) [ 3.813327] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1 [ 3.895465] Console: switching to colour frame buffer device 128x48 [ 3.917990] imx-drm display-subsystem: [drm] fb0: imx-drmdrmfb frame buffer device [ 3.926284] imx-ipuv3 18000000.ipu: IPUv3M probed [ 3.968613] brd: module loaded [ 4.007048] loop: module loaded [ 4.012429] ahci-imx 10000000.sata: supply ahci not found, using dummy regulator [ 4.020536] ahci-imx 10000000.sata: supply phy not found, using dummy regulator [ 4.028372] ahci-imx 10000000.sata: supply target not found, using dummy regulator [ 4.037481] ahci-imx 10000000.sata: hwmon0: sensor 'sata_ahci' [ 4.047097] ahci-imx 10000000.sata: SSS flag set, parallel bus scan disabled [ 4.054339] ahci-imx 10000000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 4.063367] ahci-imx 10000000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc [ 4.077848] scsi host0: ahci-imx [ 4.083466] ata1: SATA max UDMA/133 mmio [mem 0x10000000-0x10000fff] port 0x100 irq 44 [ 4.104735] CAN device driver interface [ 4.165315] usbcore: registered new interface driver r8152 [ 4.170980] usbcore: registered new interface driver lan78xx [ 4.177203] usbcore: registered new interface driver asix [ 4.182938] usbcore: registered new interface driver ax88179_178a [ 4.189155] usbcore: registered new interface driver cdc_ether [ 4.195403] usbcore: registered new interface driver smsc95xx [ 4.201275] usbcore: registered new interface driver net1080 [ 4.207308] usbcore: registered new interface driver cdc_subset [ 4.213455] usbcore: registered new interface driver zaurus [ 4.219149] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 4.226857] usbcore: registered new interface driver cdc_ncm [ 4.232607] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.239159] ehci-pci: EHCI PCI platform driver [ 4.243826] ehci-mxc: Freescale On-Chip EHCI Host driver [ 4.250029] usbcore: registered new interface driver usb-storage [ 4.267960] input: mma8450 as /devices/platform/soc/60000000.bus/63fc8000.i2c/i2c-0/0-001c/input/input0 [ 4.288137] mxc_rtc_v2 53fa4000.rtc: registered as rtc0 [ 4.293918] mxc_rtc_v2 53fa4000.rtc: setting system clock to 1970-01-01T00:00:00 UTC (0) [ 4.303573] i2c /dev entries driver [ 4.319555] Bluetooth: HCI UART driver ver 2.3 [ 4.324356] Bluetooth: HCI UART protocol H4 registered [ 4.329720] Bluetooth: HCI UART protocol LL registered [ 4.343860] sdhci: Secure Digital Host Controller Interface driver [ 4.350189] sdhci: Copyright(c) Pierre Ossman [ 4.354710] sdhci-pltfm: SDHCI platform and OF driver helper [ 4.373740] sdhci-esdhc-imx 50020000.mmc: Got CD GPIO [ 4.379038] sdhci-esdhc-imx 50020000.mmc: Got WP GPIO [ 4.403864] sahara 63ff8000.crypto: SAHARA version 4 initialized [ 4.411553] usbcore: registered new interface driver usbhid [ 4.417640] usbhid: USB HID core driver [ 4.422252] mmc0: SDHCI controller on 50004000.mmc [50004000.mmc] using ADMA [ 4.434930] ata1: SATA link down (SStatus 0 SControl 300) [ 4.446697] mmc2: SDHCI controller on 50020000.mmc [50020000.mmc] using ADMA [ 4.454862] ipu1_csi0: Registered ipu1_csi0 capture as /dev/video0 [ 4.461854] ahci-imx 10000000.sata: no device found, disabling link. [ 4.468964] ahci-imx 10000000.sata: pass ahci_imx..hotplug=1 to enable hotplug [ 4.481245] ipu1_ic_prpenc: Registered ipu1_ic_prpenc capture as /dev/video1 [ 4.490130] ipu1_ic_prpvf: Registered ipu1_ic_prpvf capture as /dev/video2 [ 4.498960] ipu1_csi1: Registered ipu1_csi1 capture as /dev/video3 [ 4.511581] imx-media: Registered ipu_ic_pp csc/scaler as /dev/video4 [ 4.527584] mmc0: host does not support reading read-only switch, assuming write-enable [ 4.545017] mmc0: new high speed SDHC card at address 0001 [ 4.554268] sgtl5000 1-000a: sgtl5000 revision 0x11 [ 4.561631] mmcblk0: mmc0:0001 SD16G 14.6 GiB [ 4.573639] sgtl5000 1-000a: Using internal LDO instead of VDDD: check ER1 erratum [ 4.645195] fsl-ssi-dai 50014000.ssi: No cache defaults, reading back from HW [ 4.715234] NET: Registered protocol family 10 [ 4.726395] Segment Routing with IPv6 [ 4.730304] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 4.741010] NET: Registered protocol family 17 [ 4.745885] can: controller area network core [ 4.750563] NET: Registered protocol family 29 [ 4.755228] can: raw protocol [ 4.758722] can: broadcast manager protocol [ 4.763208] can: netlink gateway - max_hops=1 [ 4.768267] Key type dns_resolver registered [ 4.774624] Registering SWP/SWPB emulation handler [ 4.780369] Loading compiled-in X.509 certificates [ 4.896875] imx_usb 53f80000.usb: No over current polarity defined [ 4.918847] imx_usb 53f80200.usb: No over current polarity defined [ 4.930811] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 4.936617] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 4.972193] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 4.980193] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 4.988866] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.996272] usb usb1: Product: EHCI Host Controller [ 5.001184] usb usb1: Manufacturer: Linux 5.10.180-cip34 ehci_hcd [ 5.007421] usb usb1: SerialNumber: ci_hdrc.1 [ 5.018232] hub 1-0:1.0: USB hub found [ 5.023302] hub 1-0:1.0: 1 port detected [ 5.039110] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 5.050772] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 5.128395] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 5.138371] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 5.147407] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db [ 5.155534] ALSA device list: [ 5.158609] #0: imx53-qsb-sgtl5000 [ 5.167359] Freeing unused kernel memory: 1024K [ 5.208381] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: [ 5.750870] udevd[120]: starting version 3.2.9 [ 5.760242] random: udevd: uninitialized urandom read (16 bytes read) [ 5.769202] random: udevd: uninitialized urandom read (16 bytes read) [ 5.776475] random: udevd: uninitialized urandom read (16 bytes read) [ 5.798893] udevd[120]: specified user 'tss' unknown [ 5.804769] udevd[120]: specified group 'tss' unknown [ 5.834760] udevd[121]: starting eudev-3.2.9 [ 8.560749] coda 63ff4000.vpu: IRQ bit not found [ 8.620046] coda 63ff4000.vpu: Direct firmware load for vpu_fw_imx53.bin failed with error -2 [ 8.629010] coda 63ff4000.vpu: Falling back to sysfs fallback for: vpu_fw_imx53.bin done Saving random seed: [ 9.247413] random: dd: uninitialized urandom read (32 bytes read) OK Starting network: OK Starting dropbear sshd: [ 9.561161] random: dropbear: uninitialized urandom read (32 bytes read) OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-967478/environment . /lava-967478/environment / # /lava-967478/bin/lava-test-runner /lava-967478/0 /lava-967478/bin/lava-test-runner /lava-967478/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-967478/0/tests/0_dmesg + cat uuid + UUID=967478_1.5.2.3.1[ 10.361675] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 10.495955] [ 10.613219] [ 10.734219] + set +x [ 10.747754] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-967478/environment / # . /lava-967478/environment/lava-967478/bin/lava-test-runner /lava-967478/1 / # /lava-967478/bin/lava-test-runner /lava-967478/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-967478/1/tests/1_bootrr + cat uuid + UUID=967478_1.5.2.3.5[ 11.391435] + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-967478/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-967478/1/../bin/lava-test-case [ 11.556414] /lava-967478/1/../bin/lava-test-case [ 11.672660] /lava-967478/1/../bin/lava-test-case [ 11.733466] + set +x [ 11.781354] / #