[Enter `^Ec?' for help] U-Boot SPL 2015.10-00025-g943d444 (Feb 19 2016 - 15:04:45) U-Boot 2015.10-00025-g943d444 (Feb 19 2016 - 15:04:45 +0000) Model: Radxa Rock 2 Square DRAM: 2 GiB MMC: dwmmc@ff0c0000: 0, dwmmc@ff0f0000: 1 *** Warning - bad CRC, using default environment In: serial@ff690000 Out: serial@ff690000 Err: serial@ff690000 Incorrect eeprom header Net: Warning: ethernet@ff290000 (eth0) using random MAC address - 0a:27:7a:cb:a9:73 eth0: ethernet@ff290000 Hit any key to stop autoboot: 1  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp ethernet@ff290000 Waiting for PHY auto negotiation to complete...... done Speed: 1000, full duplex BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.201.150 (260 ms) => setenv serverip 192.168.201.1 setenv serverip 192.168.201.1 => tftp 0x2000000 10740197/tftp-deploy-ijkyrqoh/kernel/zImage tftp 0x2000000 10740197/tftp-deploy-ijkyrqoh/kernel/zImage Speed: 1000, full duplex Using ethernet@ff290000 device TFTP from server 192.168.201.1; our IP address is 192.168.201.150 Filename '10740197/tftp-deploy-ijkyrqoh/kernel/zImage'. Load address: 0x2000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############ 3.5 MiB/s done Bytes transferred = 9703936 (941200 hex) => tftp 0x4000000 10740197/tftp-deploy-ijkyrqoh/ramdisk/ramdisk.cpio.gz.uboot tftp 0x4000000 10740197/tftp-deploy-ijkyrqoh/ramdisk/ramdisk.cpio.gz.uboot Speed: 1000, full duplex Using ethernet@ff290000 device TFTP from server 192.168.201.1; our IP address is 192.168.201.150 Filename '10740197/tftp-deploy-ijkyrqoh/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x4000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ####################################################### 3.5 MiB/s done Bytes transferred = 16065298 (f52312 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x1f00000 10740197/tftp-deploy-ijkyrqoh/dtb/rk3288-rock2-square.dtb tftp 0x1f00000 10740197/tftp-deploy-ijkyrqoh/dtb/rk3288-rock2-square.dtb Speed: 1000, full duplex Using ethernet@ff290000 device TFTP from server 192.168.201.1; our IP address is 192.168.201.150 Filename '10740197/tftp-deploy-ijkyrqoh/dtb/rk3288-rock2-square.dtb'. Load address: 0x1f00000 Loading: *### 3.6 MiB/s done Bytes transferred = 41652 (a2b4 hex) => setenv bootargs 'console=ttyS2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' setenv bootargs 'console=ttyS2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' => bootz 0x2000000 0x4000000 0x1f00000 bootz 0x2000000 0x4000000 0x1f00000 Kernel image @ 0x2000000 [ 0x000000 - 0x941200 ] ## Loading init Ramdisk from Legacy Image at 04000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 16065234 Bytes = 15.3 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 01f00000 Booting using the fdt blob at 0x1f00000 Using Device Tree in place at 01f00000, end 01f0d2b3 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x500 [ 0.000000] Linux version 5.10.182-cip35 (KernelCI@build-j39334-arm-gcc-10-multi-v7-defconfig-9lh2x) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Thu Jun 15 08:58:54 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Radxa Rock 2 Square [ 0.000000] earlycon: uart0 at MMIO32 0xff690000 (options '115200n8') [ 0.000000] printk: bootconsole [uart0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000030000000-0x000000007fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] percpu: Embedded 20 pages/cpu s49868 r8192 d23860 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752 [ 0.000000] Kernel command line: console=ttyS2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 1973044K/2097152K available (14336K kernel code, 2239K rwdata, 5360K rodata, 2048K init, 424K bss, 58572K reserved, 65536K cma-reserved, 1245184K highmem) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). <6>[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns <6>[ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns <6>[ 0.009083] Switching to timer-based delay loop, resolution 41ns <6>[ 0.023146] Console: colour dummy device 80x30 <6>[ 0.028349] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) <6>[ 0.040021] pid_max: default: 32768 minimum: 301 <6>[ 0.045530] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.053864] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.063326] CPU: Testing write buffer coherency: ok <6>[ 0.069013] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.075086] CPU0: thread -1, cpu 0, socket 5, mpidr 80000500 <6>[ 0.082488] Setting up static identity map for 0x300000 - 0x3000ac <6>[ 0.091646] rcu: Hierarchical SRCU implementation. <6>[ 0.102158] EFI services will not be available. <6>[ 0.107700] smp: Bringing up secondary CPUs ... <6>[ 0.114732] CPU1: thread -1, cpu 1, socket 5, mpidr 80000501 <6>[ 0.114740] CPU1: Spectre v2: using BPIALL workaround <6>[ 0.128961] CPU2: thread -1, cpu 2, socket 5, mpidr 80000502 <6>[ 0.128970] CPU2: Spectre v2: using BPIALL workaround <6>[ 0.143203] CPU3: thread -1, cpu 3, socket 5, mpidr 80000503 <6>[ 0.143212] CPU3: Spectre v2: using BPIALL workaround <6>[ 0.155685] smp: Brought up 1 node, 4 CPUs <6>[ 0.160471] SMP: Total of 4 processors activated (192.00 BogoMIPS). <6>[ 0.167658] CPU: All CPU(s) started in SVC mode. <6>[ 0.173628] devtmpfs: initialized <6>[ 0.186701] VFP support v0.3: implementor 41 architecture 3 part 30 variant d rev 0 <6>[ 0.195666] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.206778] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) <6>[ 0.216459] pinctrl core: initialized pinctrl subsystem <6>[ 0.224513] DMI not present or invalid. <6>[ 0.229855] NET: Registered protocol family 16 <6>[ 0.237403] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.247901] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.248429] cpuidle: using governor menu <6>[ 0.260478] No ATAGs? <6>[ 0.263396] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. <6>[ 0.272494] hw-breakpoint: maximum watchpoint size is 4 bytes. <6>[ 0.282648] Serial: AMBA PL011 UART driver <6>[ 0.387534] iommu: Default domain type: Translated <6>[ 0.394748] vgaarb: loaded <5>[ 0.398985] SCSI subsystem initialized <6>[ 0.403845] usbcore: registered new interface driver usbfs <6>[ 0.410229] usbcore: registered new interface driver hub <6>[ 0.416385] usbcore: registered new device driver usb <6>[ 0.424112] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.429848] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.440190] PTP clock support registered <6>[ 0.448164] clocksource: Switched to clocksource arch_sys_counter <6>[ 1.816033] NET: Registered protocol family 2 <6>[ 1.821385] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 1.831218] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) <6>[ 1.840745] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 1.849645] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 1.857944] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 1.865325] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 1.872938] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 1.881166] NET: Registered protocol family 1 <6>[ 1.886801] RPC: Registered named UNIX socket transport module. <6>[ 1.893630] RPC: Registered udp transport module. <6>[ 1.899104] RPC: Registered tcp transport module. <6>[ 1.904551] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 1.911930] PCI: CLS 0 bytes, default 64 <6>[ 1.916963] Trying to unpack rootfs image as initramfs... <6>[ 3.461198] Freeing initrd memory: 15692K <6>[ 3.466733] hw perfevents: enabled with armv7_cortex_a12 PMU driver, 7 counters available <5>[ 3.477556] Initialise system trusted keyrings <6>[ 3.483000] workingset: timestamp_bits=30 max_order=19 bucket_order=0 <6>[ 3.497172] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 3.504675] NFS: Registering the id_resolver key type <5>[ 3.510568] Key type id_resolver registered <5>[ 3.515446] Key type id_legacy registered <6>[ 3.520277] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 3.527921] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <6>[ 3.536376] ntfs: driver 2.1.32 [Flags: R/O]. <5>[ 3.541949] Key type asymmetric registered <5>[ 3.546734] Asymmetric key parser 'x509' registered <6>[ 3.552453] bounce: pool size: 64 pages <6>[ 3.556985] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) <6>[ 3.565413] io scheduler mq-deadline registered <6>[ 3.570685] io scheduler kyber registered <6>[ 3.614933] dma-pl330 ff250000.dma-controller: Loaded driver for PL330 DMAC-241330 <6>[ 3.623575] dma-pl330 ff250000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16 <6>[ 3.634793] dma-pl330 ffb20000.dma-controller: Loaded driver for PL330 DMAC-241330 <6>[ 3.643434] dma-pl330 ffb20000.dma-controller: DBUFF-64x8bytes Num_Chans-5 Num_Peri-6 Num_Events-10 <6>[ 3.717997] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled <6>[ 3.728291] printk: console [ttyS2] disabled <6>[ 3.733336] ff690000.serial: ttyS2 at MMIO 0xff690000 (irq = 43, base_baud = 1500000) is a 16550A <6>[ 3.743556] printk: console [ttyS2] enabled <6>[ 3.743556] printk: console [ttyS2] enabled <6>[ 3.753534] printk: bootconsole [uart0] disabled <6>[ 3.753534] printk: bootconsole [uart0] disabled <6>[ 3.767263] SuperH (H)SCI(F) driver initialized <6>[ 3.774140] msm_serial: driver initialized <6>[ 3.779299] STMicroelectronics ASC driver initialized <6>[ 3.787157] STM32 USART driver initialized <6>[ 3.811781] brd: module loaded <6>[ 3.823780] loop: module loaded <6>[ 3.843238] CAN device driver interface <6>[ 3.849201] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded <6>[ 3.857423] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 3.863289] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 3.870274] igb: Intel(R) Gigabit Ethernet Network Driver <6>[ 3.876602] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 3.886734] rk_gmac-dwmac ff290000.ethernet: IRQ eth_lpi not found <6>[ 3.894071] rk_gmac-dwmac ff290000.ethernet: PTP uses main clock <6>[ 3.904513] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver <6>[ 3.913153] usbcore: registered new interface driver pegasus <6>[ 3.919839] usbcore: registered new interface driver asix <6>[ 3.926206] usbcore: registered new interface driver ax88179_178a <6>[ 3.933365] usbcore: registered new interface driver cdc_ether <6>[ 3.940254] usbcore: registered new interface driver smsc75xx <6>[ 3.947018] usbcore: registered new interface driver smsc95xx <6>[ 3.953793] usbcore: registered new interface driver net1080 <6>[ 3.960467] usbcore: registered new interface driver cdc_subset <6>[ 3.967412] usbcore: registered new interface driver zaurus <6>[ 3.974037] usbcore: registered new interface driver cdc_ncm <4>[ 3.983689] dwc2 ff540000.usb: supply vusb_d not found, using dummy regulator <4>[ 3.992116] dwc2 ff540000.usb: supply vusb_a not found, using dummy regulator <6>[ 4.068471] dwc2 ff540000.usb: DWC OTG Controller <6>[ 4.074049] dwc2 ff540000.usb: new USB bus registered, assigned bus number 1 <6>[ 4.082291] dwc2 ff540000.usb: irq 48, io mem 0xff540000 <6>[ 4.089325] hub 1-0:1.0: USB hub found <6>[ 4.093855] hub 1-0:1.0: 1 port detected <4>[ 4.099361] dwc2 ff580000.usb: supply vusb_d not found, using dummy regulator <4>[ 4.107784] dwc2 ff580000.usb: supply vusb_a not found, using dummy regulator <6>[ 4.248229] dwc2 ff580000.usb: EPs: 10, dedicated fifos, 972 entries in SPRAM <6>[ 4.256791] dwc2 ff580000.usb: DWC OTG Controller <6>[ 4.262411] dwc2 ff580000.usb: new USB bus registered, assigned bus number 2 <6>[ 4.270647] dwc2 ff580000.usb: irq 49, io mem 0xff580000 <6>[ 4.277629] hub 2-0:1.0: USB hub found <6>[ 4.282183] hub 2-0:1.0: 1 port detected <6>[ 4.288490] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>[ 4.296084] ehci-pci: EHCI PCI platform driver <6>[ 4.301421] ehci-platform: EHCI generic platform driver <6>[ 4.307893] ehci-platform ff500000.usb: EHCI Host Controller <6>[ 4.314566] ehci-platform ff500000.usb: new USB bus registered, assigned bus number 3 <6>[ 4.323872] ehci-platform ff500000.usb: irq 47, io mem 0xff500000 <6>[ 4.358159] ehci-platform ff500000.usb: USB 2.0 started, EHCI 1.00 <6>[ 4.366086] hub 3-0:1.0: USB hub found <6>[ 4.370659] hub 3-0:1.0: 1 port detected <6>[ 4.376049] ehci-orion: EHCI orion driver <6>[ 4.381106] SPEAr-ehci: EHCI SPEAr driver <6>[ 4.386074] ehci-st: EHCI STMicroelectronics driver <6>[ 4.392051] ehci-exynos: EHCI Exynos driver <6>[ 4.397207] ehci-atmel: EHCI Atmel driver <6>[ 4.402200] tegra-ehci: Tegra EHCI driver <6>[ 4.407197] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver <6>[ 4.414434] ohci-pci: OHCI PCI platform driver <6>[ 4.419760] ohci-platform: OHCI generic platform driver <6>[ 4.426146] SPEAr-ohci: OHCI SPEAr driver <6>[ 4.431133] ohci-st: OHCI STMicroelectronics driver <6>[ 4.437071] ohci-atmel: OHCI Atmel driver <6>[ 4.443198] usbcore: registered new interface driver usb-storage <6>[ 4.457741] i2c /dev entries driver <6>[ 4.468280] VCC_DDR: supplied by vcc_sys <6>[ 4.475246] VCC_IO: supplied by vcc_sys <6>[ 4.482133] VDD_LOG: Bringing 1100000uV into 1000000-1000000uV <6>[ 4.491347] VDD_LOG: supplied by vcc_sys <6>[ 4.498339] VCC_20: supplied by vcc_sys <6>[ 4.505196] VCCIO_SD: supplied by VCC_IO <6>[ 4.512700] VDD10_LCD: supplied by VCC_IO <6>[ 4.520653] VCCA_CODEC: supplied by VCC_IO <6>[ 4.528717] VCCA_TP: supplied by vcc_sys <6>[ 4.536102] VCCIO_PMU: supplied by vcc_sys <6>[ 4.543295] VDD_10: supplied by VCC_20 <6>[ 4.550589] VCC_18: supplied by VCC_20 <6>[ 4.557864] VCC18_LCD: supplied by VCC_20 <6>[ 4.566943] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected! <6>[ 4.576340] vdd_cpu: supplied by vcc_sys <6>[ 4.583693] vcc_flash: supplied by VCC_IO <6>[ 4.589066] vcc_sd: supplied by VCC_IO <6>[ 4.595864] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected! <6>[ 4.605279] vdd_gpu: supplied by vcc_sys <4>[ 4.628330] dw_wdt ff800000.watchdog: No valid TOPs array specified <6>[ 4.644837] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 500000 KHz, changing to: 600000 KHz <6>[ 4.659268] sdhci: Secure Digital Host Controller Interface driver <6>[ 4.666470] sdhci: Copyright(c) Pierre Ossman <6>[ 4.673802] Synopsys Designware Multimedia Card Interface Driver <6>[ 4.681919] dwmmc_rockchip ff0c0000.mmc: IDMAC supports 32-bit address mode. <6>[ 4.682131] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 4.682505] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 4.682621] dwmmc_rockchip ff0f0000.mmc: IDMAC supports 32-bit address mode. <6>[ 4.682670] dwmmc_rockchip ff0f0000.mmc: Using internal DMA controller. <6>[ 4.682681] dwmmc_rockchip ff0f0000.mmc: Version ID is 270a <6>[ 4.682727] dwmmc_rockchip ff0f0000.mmc: DW MMC controller at irq 40,32 bit host data width,256 deep fifo <6>[ 4.683794] dwmmc_rockchip ff0f0000.mmc: allocated mmc-pwrseq <6>[ 4.683802] mmc_host mmc0: card is non-removable. <6>[ 4.690115] dwmmc_rockchip ff0c0000.mmc: Using internal DMA controller. <6>[ 4.696940] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) <6>[ 4.698288] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 4.704878] dwmmc_rockchip ff0c0000.mmc: Version ID is 270a <6>[ 4.713050] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 4.720738] dwmmc_rockchip ff0c0000.mmc: DW MMC controller at irq 38,32 bit host data width,256 deep fifo <6>[ 4.727248] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 39,32 bit host data width,256 deep fifo <6>[ 4.738334] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 4.744980] usb 3-1: new high-speed USB device number 2 using ehci-platform <6>[ 4.750840] usbcore: registered new interface driver usbhid <6>[ 4.833091] usbhid: USB HID core driver <6>[ 4.839618] NET: Registered protocol family 10 <6>[ 4.845243] Segment Routing with IPv6 <6>[ 4.845653] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) <6>[ 4.849656] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 4.867340] NET: Registered protocol family 17 <6>[ 4.872613] can: controller area network core <6>[ 4.877802] NET: Registered protocol family 29 <6>[ 4.883065] can: raw protocol <6>[ 4.883084] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) <6>[ 4.886665] can: broadcast manager protocol <6>[ 4.902809] can: netlink gateway - max_hops=1 <5>[ 4.908157] Key type dns_resolver registered <6>[ 4.913261] ThumbEE CPU extension supported. <5>[ 4.918335] Registering SWP/SWPB emulation handler <6>[ 4.924013] mmc0: new high speed MMC card at address 0001 <5>[ 4.924114] Loading compiled-in X.509 certificates <6>[ 4.930615] mmcblk0: mmc0:0001 032GE4 29.1 GiB <6>[ 4.941602] mmcblk0boot0: mmc0:0001 032GE4 partition 1 4.00 MiB <6>[ 4.948720] mmcblk0boot1: mmc0:0001 032GE4 partition 2 4.00 MiB <6>[ 4.954229] rk_gmac-dwmac ff290000.ethernet: IRQ eth_lpi not found <6>[ 4.955709] mmcblk0rpmb: mmc0:0001 032GE4 partition 3 4.00 MiB, chardev (235:0) <6>[ 4.962879] rk_gmac-dwmac ff290000.ethernet: PTP uses main clock <6>[ 4.978881] rk_gmac-dwmac ff290000.ethernet: clock input or output? (input). <6>[ 4.987073] rk_gmac-dwmac ff290000.ethernet: TX delay(0x30). <6>[ 4.993702] rk_gmac-dwmac ff290000.ethernet: RX delay(0x10). <6>[ 5.000330] rk_gmac-dwmac ff290000.ethernet: integrated PHY? (no). <6>[ 5.000395] hub 3-1:1.0: USB hub found <3>[ 5.007547] rk_gmac-dwmac ff290000.ethernet: cannot get clock clk_mac_speed <6>[ 5.020078] rk_gmac-dwmac ff290000.ethernet: clock input from PHY <6>[ 5.027192] hub 3-1:1.0: 4 ports detected <6>[ 5.032192] rk_gmac-dwmac ff290000.ethernet: init for RGMII <6>[ 5.038815] rk_gmac-dwmac ff290000.ethernet: User ID: 0x10, Synopsys ID: 0x35 <6>[ 5.047099] rk_gmac-dwmac ff290000.ethernet: DWMAC1000 <6>[ 5.053248] rk_gmac-dwmac ff290000.ethernet: DMA HW capability register supported <6>[ 5.061913] rk_gmac-dwmac ff290000.ethernet: RX Checksum Offload Engine supported <6>[ 5.070571] rk_gmac-dwmac ff290000.ethernet: COE Type 2 <6>[ 5.076698] rk_gmac-dwmac ff290000.ethernet: TX Checksum insertion supported <6>[ 5.084867] rk_gmac-dwmac ff290000.ethernet: Wake-Up On Lan supported <6>[ 5.092383] rk_gmac-dwmac ff290000.ethernet: Normal descriptors <6>[ 5.099302] rk_gmac-dwmac ff290000.ethernet: Ring mode enabled <6>[ 5.106098] rk_gmac-dwmac ff290000.ethernet: Enable RX Mitigation via HW Watchdog Timer <6>[ 5.115346] rk_gmac-dwmac ff290000.ethernet: device MAC address 7a:56:22:c2:9a:c8 <6>[ 5.126243] mmcblk0: p1 p2 <6>[ 5.255789] RTL8211E Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:00, irq=POLL) <6>[ 5.270088] RTL8211E Gigabit Ethernet stmmac-0:01: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:01, irq=POLL) <3>[ 5.287683] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present! <6>[ 5.287734] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <3>[ 5.296743] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present! <3>[ 5.313949] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present! <6>[ 5.323105] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 5.323400] input: gpio-keys as /devices/platform/gpio-keys/input/input0 <6>[ 5.330805] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 5.345102] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 39,32 bit host data width,256 deep fifo <6>[ 5.359242] rk_gmac-dwmac ff290000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211E Gigabit Ethernet] (irq=POLL) <6>[ 5.371900] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 5.378124] rk_gmac-dwmac ff290000.ethernet eth0: No Safety Features support found <6>[ 5.380106] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <4>[ 5.388824] rk_gmac-dwmac ff290000.ethernet eth0: PTP not supported by HW <6>[ 5.396500] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 5.410902] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 39,32 bit host data width,256 deep fifo <6>[ 5.421973] rk_gmac-dwmac ff290000.ethernet eth0: configuring for phy/rgmii link mode <6>[ 9.579495] rk_gmac-dwmac ff290000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off <6>[ 9.598144] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 9.628131] Sending DHCP requests .., OK <6>[ 12.693242] IP-Config: Got DHCP answer from 192.168.201.1, my address is 192.168.201.132 <6>[ 12.702745] IP-Config: Complete: <6>[ 12.706709] device=eth0, hwaddr=7a:56:22:c2:9a:c8, ipaddr=192.168.201.132, mask=255.255.255.0, gw=192.168.201.1 <6>[ 12.718925] host=192.168.201.132, domain=lava-rack, nis-domain=(none) <6>[ 12.726955] bootserver=192.168.201.1, rootserver=192.168.201.1, rootpath= <6>[ 12.726981] nameserver0=192.168.201.1 <4>[ 12.743893] dw-apb-uart ff690000.serial: forbid DMA for kernel console <6>[ 12.756788] Freeing unused kernel memory: 2048K <6>[ 12.778567] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 12.847394] udevd[120]: starting version 3.2.9 <5>[ 12.853241] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 12.860883] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 12.868443] random: udevd: uninitialized urandom read (16 bytes read) <27>[ 12.879919] udevd[120]: specified user 'tss' unknown <27>[ 12.885903] udevd[120]: specified group 'tss' unknown <30>[ 12.892651] udevd[121]: starting eudev-3.2.9 <6>[ 13.040528] rockchip-vop ff930000.vop: Adding to iommu group 0 <6>[ 13.049387] rockchip-vop ff940000.vop: Adding to iommu group 1 <6>[ 13.056833] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 13.065454] rockchip-drm display-subsystem: bound ff930000.vop (ops vop_component_ops [rockchipdrm]) <6>[ 13.089645] rockchip-drm display-subsystem: bound ff940000.vop (ops vop_component_ops [rockchipdrm]) <6>[ 13.095757] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 13.100278] dwhdmi-rockchip ff980000.hdmi: Detected HDMI TX controller v2.00a with HDCP (DWC MHL PHY) <6>[ 13.107860] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 13.124973] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 39,32 bit host data width,256 deep fifo <4>[ 13.129784] rtc-hym8563 0-0051: no valid clock/calendar values available <6>[ 13.136417] rockchip-drm display-subsystem: bound ff980000.hdmi (ops dw_hdmi_rockchip_ops [rockchipdrm]) <6>[ 13.165020] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes <6>[ 13.190118] rtc-hym8563 0-0051: registered as rtc0 <6>[ 13.190142] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0 <4>[ 13.197349] rtc-hym8563 0-0051: no valid clock/calendar values available <6>[ 13.197518] panfrost ffa30000.gpu: clock rate = 400000000 <6>[ 13.198997] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <3>[ 13.227240] rtc-hym8563 0-0051: hctosys: unable to read the hardware clock <6>[ 13.235350] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 13.243063] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 13.249612] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 39,32 bit host data width,256 deep fifo <6>[ 13.270536] dwmmc_rockchip ff0d0000.mmc: allocated mmc-pwrseq <6>[ 13.277259] mmc_host mmc2: card is non-removable. <6>[ 13.297887] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) <6>[ 13.321807] panfrost ffa30000.gpu: mali-t760 id 0x750 major 0x0 minor 0x0 status 0x1 <6>[ 13.324595] rk3288-crypto ff8a0000.crypto: will run requests pump with realtime priority <6>[ 13.330771] panfrost ffa30000.gpu: features: 00000000,100277bf, issues: 00000000,24040400 <6>[ 13.330776] panfrost ffa30000.gpu: Features: L2:0x07120206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7 <6>[ 13.330782] panfrost ffa30000.gpu: shader_present=0xf l2_present=0x1 <6>[ 13.341110] rk3288-crypto ff8a0000.crypto: Crypto Accelerator successfully registered <6>[ 13.383905] [drm] Initialized panfrost 1.1.0 20180908 for ffa30000.gpu on minor 1 <4>[ 13.389195] mmc2: queuing unknown CIS tuple 0x80 (2 bytes) <4>[ 13.402304] mmc2: queuing unknown CIS tuple 0x80 (3 bytes) <4>[ 13.410380] mmc2: queuing unknown CIS tuple 0x80 (3 bytes) <4>[ 13.419651] mmc2: queuing unknown CIS tuple 0x80 (7 bytes) <6>[ 13.480035] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) <6>[ 13.495445] mmc2: new high speed SDIO card at address 0001 <5>[ 13.516473] cfg80211: Loading compiled-in X.509 certificates for regulatory database done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL <5>[ 13.550900] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' Starting dropbear sshd: <4>[ 13.558567] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 OK<6>[ 13.570808] cfg80211: failed to load regulatory.db /bin/sh: <6>[ 13.578603] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4339-sdio for chip BCM4339/2 can't access tty; job control turned off <4>[ 13.589479] brcmfmac mmc2:0001:1: Direct firmware load for brcm/brcmfmac4339-sdio.bin failed with error -2 / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-10740197/environment . /lava-10740197/environment / # /lava-10740197/bin/lava-test-runner /lava-10740197/0 /lava-10740197/bin/lava-test-runner /lava-10740197/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-10740197/0/tests/0_dmesg + cat uuid <8>[ 14.185776] + UUID=10740197_1.5.2.4.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 14.216089] <6>[ 14.228206] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes <8>[ 14.238724] <8>[ 14.259221] + <8>[ 14.269547] set +x / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-10740197/environment / # . /lava-10740197/environment/lava-10740197/bin/lava-test-runner /lava-10740197/1 / # <3>[ 14.613707] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50 /lava-10740197/bin/lava-test-runner /lava-10740197/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-10740197/1/tests/1_boot<8>[ 14.761735] rr + cat uuid + UUID=10740197_1.5.2.4.5 + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-10740197/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-10740197/1/../bin/lava-test-case <8>[ 14.797579] /lava-10740197/1/../bin/lava-test-case <8>[ 14.823002] /lava-10740197/1/../bin/lava-test-case <8>[ 14.840599] /lava-10740197/1/../bin/lava-test-case <8>[ 14.866083] /lava-10740197/1/../bin/lava-test-case <8>[ 14.895225] /lava-10740197/1/../bin/lava-test-case <8>[ 14.915362] /lava-10740197/1/../bin/lava-test-case <8>[ 14.938019] /lava-10740197/1/../bin/lava-test-case <8>[ 14.957435] /lava-10740197/1/../bin/lava-test-case <8>[ 14.978581] + set +x <8>[ 14.987319] / #