Trying 192.168.56.21... Connected to conserv1. Escape character is '^]'. ser2net port telnet,3004 device serialdev, /dev/serial/by-path/platform-fd500000.pcie-pci-0000:01:00.0-usb-0:1.2.2.2:1.0-port0, 115200n81, local=false [] (Debian GNU/Linux) U-Boot SPL 2015.10-00061-g68849f9 (Jan 08 2016 - 17:01:43) U-Boot 2015.10-00061-g68849f9 (Jan 08 2016 - 17:01:43 +0100) CPU: Freescale i.MX6DL rev1.1 at 792 MHz Reset cause: POR Board: UDOO DualLite DRAM: 1 GiB MMC: FSL_SDHC: 0 *** Warning - bad CRC, using default environment No panel detected: default to HDMI Display: HDMI (1024x768) In: serial Out: serial Err: serial Net: using phy at 6 FEC [PRIME] Hit any key to stop autoboot: 3  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.... done BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 BOOTP broadcast 5 *** Unhandled DHCP Option in OFFER/ACK: 42 *** Unhandled DHCP Option in OFFER/ACK: 42 DHCP client bound to address 192.168.56.142 (3803 ms) => setenv serverip 192.168.56.75 setenv serverip 192.168.56.75 => tftp 0x12000000 588657/tftp-deploy-9jz8ycnp/kernel/zImage tftp 0x12000000 588657/tftp-deploy-9jz8ycnp/kernel/zImage Using FEC device TFTP from server 192.168.56.75; our IP address is 192.168.56.142 Filename '588657/tftp-deploy-9jz8ycnp/kernel/zImage'. Load address: 0x12000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############ 10 MiB/s done Bytes transferred = 9703936 (941200 hex) => tftp 0x13000000 588657/tftp-deploy-9jz8ycnp/ramdisk/ramdisk.cpio.gz.uboot tftp 0x13000000 588657/tftp-deploy-9jz8ycnp/ramdisk/ramdisk.cpio.gz.uboot Using FEC device TFTP from server 192.168.56.75; our IP address is 192.168.56.142 Filename '588657/tftp-deploy-9jz8ycnp/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x13000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ###################################################### 9.9 MiB/s done Bytes transferred = 16059410 (f50c12 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x18000000 588657/tftp-deploy-9jz8ycnp/dtb/imx6dl-udoo.dtb tftp 0x18000000 588657/tftp-deploy-9jz8ycnp/dtb/imx6dl-udoo.dtb Using FEC device TFTP from server 192.168.56.75; our IP address is 192.168.56.142 Filename '588657/tftp-deploy-9jz8ycnp/dtb/imx6dl-udoo.dtb'. Load address: 0x18000000 Loading: *### 5.6 MiB/s done Bytes transferred = 35107 (8923 hex) => setenv bootargs 'console=ttymxc1,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' setenv bootargs 'console=ttymxc1,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' => bootz 0x12000000 0x13000000 0x18000000 bootz 0x12000000 0x13000000 0x18000000 Kernel image @ 0x12000000 [ 0x000000 - 0x941200 ] ## Loading init Ramdisk from Legacy Image at 13000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 16059346 Bytes = 15.3 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 18000000 Booting using the fdt blob at 0x18000000 Using Device Tree in place at 18000000, end 1800b922 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.182-cip35 (KernelCI@build-j15408-arm-gcc-10-multi-v7-defconfig-f97wl) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Fri Jun 9 14:49:02 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Udoo i.MX6 Dual-lite Board [ 0.000000] earlycon: ec_imx21 at MMIO 0x021e8000 (options '') [ 0.000000] printk: bootconsole [ec_imx21] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x4c000000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000010000000-0x000000003fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000040000000-0x000000004fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000010000000-0x000000004fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000004fffffff] [ 0.000000] percpu: Embedded 20 pages/cpu s49868 r8192 d23860 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260608 [ 0.000000] Kernel command line: console=ttymxc1,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 932864K/1048576K available (14336K kernel code, 2239K rwdata, 5360K rodata, 2048K init, 424K bss, 50176K reserved, 65536K cma-reserved, 196608K highmem) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] L2C-310 erratum 769419 enabled <6>[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 <6>[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 <6>[ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines <6>[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled <6>[ 0.000000] L2C-310 cache controller enabled, 16 ways, 512 kB <6>[ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76450001 <6>[ 0.000000] Switching to timer-based delay loop, resolution 333ns <6>[ 0.000007] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns <6>[ 0.008442] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns <6>[ 0.021792] Console: colour dummy device 80x30 <6>[ 0.023689] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) <6>[ 0.034102] pid_max: default: 32768 minimum: 301 <6>[ 0.039135] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.046547] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.055195] CPU: Testing write buffer coherency: ok <6>[ 0.059692] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.065214] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 <6>[ 0.071587] Setting up static identity map for 0x10300000 - 0x103000ac <6>[ 0.079108] rcu: Hierarchical SRCU implementation. <6>[ 0.085727] EFI services will not be available. <6>[ 0.087881] smp: Bringing up secondary CPUs ... <6>[ 0.093245] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 <6>[ 0.093255] CPU1: Spectre v2: using BPIALL workaround <6>[ 0.103826] smp: Brought up 1 node, 2 CPUs <6>[ 0.108058] SMP: Total of 2 processors activated (12.00 BogoMIPS). <6>[ 0.114461] CPU: All CPU(s) started in SVC mode. <6>[ 0.119905] devtmpfs: initialized <6>[ 0.128908] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 <6>[ 0.134235] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.144141] futex hash table entries: 512 (order: 3, 32768 bytes, linear) <6>[ 0.154274] pinctrl core: initialized pinctrl subsystem <6>[ 0.158680] DMI not present or invalid. <6>[ 0.161763] NET: Registered protocol family 16 <6>[ 0.168159] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.175156] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.175341] cpuidle: using governor menu <6>[ 0.183453] CPU identified as i.MX6DL, silicon rev 1.1 <6>[ 0.296882] vdd1p1: supplied by regulator-dummy <6>[ 0.304845] vdd3p0: supplied by regulator-dummy <6>[ 0.312750] vdd2p5: supplied by regulator-dummy <6>[ 0.320721] vddarm: supplied by regulator-dummy <6>[ 0.328867] vddpu: supplied by regulator-dummy <6>[ 0.336564] vddsoc: supplied by regulator-dummy <6>[ 0.522541] No ATAGs? <6>[ 0.522676] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. <6>[ 0.530514] hw-breakpoint: maximum watchpoint size is 4 bytes. <6>[ 0.540106] imx6dl-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver <6>[ 0.549281] Serial: AMBA PL011 UART driver <6>[ 0.581651] iommu: Default domain type: Translated <6>[ 0.584252] vgaarb: loaded <5>[ 0.587816] SCSI subsystem initialized <6>[ 0.591408] usbcore: registered new interface driver usbfs <6>[ 0.596735] usbcore: registered new interface driver hub <6>[ 0.602245] usbcore: registered new device driver usb <6>[ 0.608778] i2c i2c-1: IMX I2C adapter registered <6>[ 0.613082] i2c i2c-2: IMX I2C adapter registered <6>[ 0.618636] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.622656] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.632113] PTP clock support registered <6>[ 0.639758] clocksource: Switched to clocksource mxc_timer1 <6>[ 1.700353] NET: Registered protocol family 2 <6>[ 1.702351] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 1.710957] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) <6>[ 1.718420] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 1.726499] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 1.733930] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 1.740543] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 1.747305] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 1.754807] NET: Registered protocol family 1 <6>[ 1.759864] RPC: Registered named UNIX socket transport module. <6>[ 1.765370] RPC: Registered udp transport module. <6>[ 1.770358] RPC: Registered tcp transport module. <6>[ 1.775288] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 1.782016] PCI: CLS 0 bytes, default 64 <6>[ 1.786616] Trying to unpack rootfs image as initramfs... <6>[ 3.037571] Freeing initrd memory: 15684K <4>[ 3.039518] hw perfevents: no interrupt-affinity property for /pmu, guessing. <6>[ 3.046662] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available <5>[ 3.056403] Initialise system trusted keyrings <6>[ 3.059820] workingset: timestamp_bits=30 max_order=18 bucket_order=0 <6>[ 3.072242] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 3.076256] NFS: Registering the id_resolver key type <5>[ 3.080918] Key type id_resolver registered <5>[ 3.085232] Key type id_legacy registered <6>[ 3.089613] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 3.096556] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <6>[ 3.104168] ntfs: driver 2.1.32 [Flags: R/O]. <5>[ 3.109260] Key type asymmetric registered <5>[ 3.113113] Asymmetric key parser 'x509' registered <6>[ 3.118256] bounce: pool size: 64 pages <6>[ 3.122360] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) <6>[ 3.129984] io scheduler mq-deadline registered <6>[ 3.134737] io scheduler kyber registered <6>[ 3.171217] mxs-dma 110000.dma-apbh: initialized <4>[ 3.178024] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 <6>[ 3.185004] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware <6>[ 3.242284] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled <6>[ 3.250156] SuperH (H)SCI(F) driver initialized <6>[ 3.253115] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 70, base_baud = 5000000) is a IMX <6>[ 3.261036] printk: console [ttymxc1] enabled <6>[ 3.261036] printk: console [ttymxc1] enabled <6>[ 3.270200] printk: bootconsole [ec_imx21] disabled <6>[ 3.270200] printk: bootconsole [ec_imx21] disabled <6>[ 3.281412] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 71, base_baud = 5000000) is a IMX <6>[ 3.293638] msm_serial: driver initialized <6>[ 3.298227] STMicroelectronics ASC driver initialized <6>[ 3.305266] STM32 USART driver initialized <6>[ 3.327067] brd: module loaded <6>[ 3.338481] loop: module loaded <6>[ 3.355944] CAN device driver interface <6>[ 3.361212] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded <6>[ 3.369496] pps pps0: new PPS source ptp0 <6>[ 3.406169] fec 2188000.ethernet eth0: registered PHC device 0 <6>[ 3.413558] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 3.418793] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 3.425073] igb: Intel(R) Gigabit Ethernet Network Driver <6>[ 3.430753] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 3.441930] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver <6>[ 3.449642] usbcore: registered new interface driver pegasus <6>[ 3.455641] usbcore: registered new interface driver asix <6>[ 3.461357] usbcore: registered new interface driver ax88179_178a <6>[ 3.467747] usbcore: registered new interface driver cdc_ether <6>[ 3.473904] usbcore: registered new interface driver smsc75xx <6>[ 3.479980] usbcore: registered new interface driver smsc95xx <6>[ 3.486024] usbcore: registered new interface driver net1080 <6>[ 3.492001] usbcore: registered new interface driver cdc_subset <6>[ 3.498217] usbcore: registered new interface driver zaurus <6>[ 3.504149] usbcore: registered new interface driver cdc_ncm <6>[ 3.513165] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>[ 3.519995] ehci-pci: EHCI PCI platform driver <6>[ 3.524747] ehci-platform: EHCI generic platform driver <6>[ 3.530525] ehci-orion: EHCI orion driver <6>[ 3.535005] SPEAr-ehci: EHCI SPEAr driver <6>[ 3.539443] ehci-st: EHCI STMicroelectronics driver <6>[ 3.544780] ehci-exynos: EHCI Exynos driver <6>[ 3.549392] ehci-atmel: EHCI Atmel driver <6>[ 3.553847] tegra-ehci: Tegra EHCI driver <6>[ 3.558316] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver <6>[ 3.564815] ohci-pci: OHCI PCI platform driver <6>[ 3.569578] ohci-platform: OHCI generic platform driver <6>[ 3.575324] SPEAr-ohci: OHCI SPEAr driver <6>[ 3.579790] ohci-st: OHCI STMicroelectronics driver <6>[ 3.585113] ohci-atmel: OHCI Atmel driver <6>[ 3.590531] usbcore: registered new interface driver usb-storage <6>[ 3.604142] i2c /dev entries driver <6>[ 3.625618] sdhci: Secure Digital Host Controller Interface driver <6>[ 3.632127] sdhci: Copyright(c) Pierre Ossman <6>[ 3.639069] Synopsys Designware Multimedia Card Interface Driver <6>[ 3.647102] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 3.654385] sdhci-esdhc-imx 2198000.mmc: Got CD GPIO <6>[ 3.659909] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 3.667214] usbcore: registered new interface driver usbhid <6>[ 3.673107] usbhid: USB HID core driver <6>[ 3.683393] NET: Registered protocol family 10 <6>[ 3.689289] Segment Routing with IPv6 <6>[ 3.693362] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 3.693491] mmc2: SDHCI controller on 2198000.mmc [2198000.mmc] using ADMA <6>[ 3.700199] NET: Registered protocol family 17 <6>[ 3.711454] can: controller area network core <6>[ 3.716146] NET: Registered protocol family 29 <6>[ 3.720890] can: raw protocol <6>[ 3.724132] can: broadcast manager protocol <6>[ 3.728589] can: netlink gateway - max_hops=1 <5>[ 3.733728] Key type dns_resolver registered <6>[ 3.740245] ThumbEE CPU extension supported. <4>[ 3.740456] mmc2: host does not support reading read-only switch, assuming write-enable <5>[ 3.744798] Registering SWP/SWPB emulation handler <5>[ 3.758646] Loading compiled-in X.509 certificates <6>[ 3.758684] mmc2: new high speed SDXC card at address 59b4 <6>[ 3.770469] mmcblk2: mmc2:59b4 SD128 119 GiB <6>[ 3.778307] mmcblk2: p1 p2 <4>[ 3.780903] imx_usb 2184000.usb: No over current polarity defined <3>[ 4.393998] mxs_phy 20c9000.usbphy: Data pin can't make good contact. <4>[ 4.405027] imx_usb 2184200.usb: No over current polarity defined