Connected to bbb-patersonc-01 console [channel connected] (~$quit to exit) U-Boot SPL 2020.10 (Apr 28 2023 - 11:09:01 +0100) Trying to boot from MMC2 U-Boot 2020.10 (Apr 28 2023 - 11:09:01 +0100) CPU : AM335X-GP rev 2.1 Model: TI AM335x BeagleBone Black DRAM: 512 MiB WDT: Started with servicing (60s timeout) MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from FAT... Unable to use mmc 1:1... not set. Validating first E-fuse MAC Net: eth2: ethernet@4a100000, eth3: usb_ether Hit any key to stop autoboot: 2 0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp link up on port 0, speed 100, full duplex BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 DHCP client bound to address 192.168.1.81 (1172 ms) => setenv serverip 192.168.1.1 setenv serverip 192.168.1.1 => tftp 0x82000000 994718/tftp-deploy-enwicujz/kernel/zImage tftp 0x82000000 994718/tftp-deploy-enwicujz/kernel/zImage link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 192.168.1.1; our IP address is 192.168.1.81 Filename '994718/tftp-deploy-enwicujz/kernel/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ########### 2.4 MiB/s done Bytes transferred = 9699840 (940200 hex) => tftp 0x83000000 994718/tftp-deploy-enwicujz/ramdisk/ramdisk.cpio.gz.uboot tftp 0x83000000 994718/tftp-deploy-enwicujz/ramdisk/ramdisk.cpio.gz.uboot link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 192.168.1.1; our IP address is 192.168.1.81 Filename '994718/tftp-deploy-enwicujz/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x83000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ######################################################## 2.3 MiB/s done Bytes transferred = 16078788 (f557c4 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x88000000 994718/tftp-deploy-enwicujz/dtb/am335x-boneblack.dtb tftp 0x88000000 994718/tftp-deploy-enwicujz/dtb/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 192.168.1.1; our IP address is 192.168.1.81 Filename '994718/tftp-deploy-enwicujz/dtb/am335x-boneblack.dtb'. Load address: 0x88000000 Loading: *##### 2.1 MiB/s done Bytes transferred = 62828 (f56c hex) => setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' => bootz 0x82000000 0x83000000 0x88000000 bootz 0x82000000 0x83000000 0x88000000 ## Loading init Ramdisk from Legacy Image at 83000000 ... Image Name: Created: 2023-08-09 5:10:13 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 16078724 Bytes = 15.3 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Using Device Tree in place at 88000000, end 8801256b Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.186-cip37 (KernelCI@build-j7278-arm-gcc-10-multi-v7-defconfig-xkz9b) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Wed Aug 9 04:40:18 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black [ 0.000000] earlycon: omap8250 at MMIO 0x44e09000 (options '') [ 0.000000] printk: bootconsole [omap8250] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x9b800000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] Normal empty [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.1 (sgx neon) [ 0.000000] percpu: Embedded 20 pages/cpu s49868 r8192 d23860 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129540 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 410844K/522240K available (14336K kernel code, 2239K rwdata, 5356K rodata, 2048K init, 424K bss, 45860K reserved, 65536K cma-reserved, 0K highmem) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=1. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts <6>[ 0.000000] TI gptimer clocksource: always-on /ocp/interconnect@44c00000/segment@200000/target-module@31000 <6>[ 0.000010] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns <6>[ 0.008333] clocksource: dmtimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns <6>[ 0.019146] TI gptimer clockevent: 24000000 Hz at /ocp/interconnect@48000000/segment@0/target-module@40000 <6>[ 0.033678] Console: colour dummy device 80x30 <3>[ 0.038545] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' <3>[ 0.045588] This ensures that you still see kernel messages. Please <3>[ 0.052306] update your kernel commandline. <6>[ 0.056911] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) <6>[ 0.096109] pid_max: default: 32768 minimum: 301 <6>[ 0.101319] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.109108] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.118109] CPU: Testing write buffer coherency: ok <6>[ 0.123493] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.129280] CPU0: thread -1, cpu 0, socket -1, mpidr 0 <6>[ 0.135586] Setting up static identity map for 0x80300000 - 0x803000ac <6>[ 0.144999] rcu: Hierarchical SRCU implementation. <6>[ 0.155407] EFI services will not be available. <6>[ 0.160580] smp: Bringing up secondary CPUs ... <6>[ 0.165507] smp: Brought up 1 node, 1 CPU <6>[ 0.169923] SMP: Total of 1 processors activated (996.14 BogoMIPS). <6>[ 0.176633] CPU: All CPU(s) started in SVC mode. <6>[ 0.182251] devtmpfs: initialized <6>[ 0.196101] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 <6>[ 0.204631] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.215061] futex hash table entries: 256 (order: 2, 16384 bytes, linear) <6>[ 0.226201] pinctrl core: initialized pinctrl subsystem <6>[ 0.234637] DMI not present or invalid. <6>[ 0.239702] NET: Registered protocol family 16 <6>[ 0.247001] DMA: preallocated 256 KiB pool for atomic coherent allocations <3>[ 0.273585] l3-aon-clkctrl:0000:0: failed to disable <6>[ 0.281871] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.282079] cpuidle: using governor menu <6>[ 1.337637] No ATAGs? <6>[ 1.340313] hw-breakpoint: debug architecture 0x4 unsupported. <6>[ 1.355403] Serial: AMBA PL011 UART driver <6>[ 1.394477] iommu: Default domain type: Translated <6>[ 1.400329] vgaarb: loaded <5>[ 1.404378] SCSI subsystem initialized <6>[ 1.409147] usbcore: registered new interface driver usbfs <6>[ 1.415237] usbcore: registered new interface driver hub <6>[ 1.421040] usbcore: registered new device driver usb <6>[ 1.428444] pps_core: LinuxPPS API ver. 1 registered <6>[ 1.433878] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 1.443571] PTP clock support registered <6>[ 1.452080] clocksource: Switched to clocksource dmtimer <6>[ 2.429216] NET: Registered protocol family 2 <6>[ 2.434361] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 2.442829] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) <6>[ 2.451723] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) <6>[ 2.460019] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) <6>[ 2.467691] TCP: Hash tables configured (established 4096 bind 4096) <6>[ 2.474620] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 2.481615] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 2.489221] NET: Registered protocol family 1 <6>[ 2.494850] RPC: Registered named UNIX socket transport module. <6>[ 2.501216] RPC: Registered udp transport module. <6>[ 2.506396] RPC: Registered tcp transport module. <6>[ 2.511497] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 2.518412] PCI: CLS 0 bytes, default 64 <6>[ 2.523456] Trying to unpack rootfs image as initramfs... <6>[ 3.611533] Freeing initrd memory: 15704K <6>[ 3.617087] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available <5>[ 3.627478] Initialise system trusted keyrings <6>[ 3.632923] workingset: timestamp_bits=30 max_order=17 bucket_order=0 <6>[ 3.646005] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 3.653347] NFS: Registering the id_resolver key type <5>[ 3.658890] Key type id_resolver registered <5>[ 3.663525] Key type id_legacy registered <6>[ 3.668036] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 3.675228] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <6>[ 3.683157] ntfs: driver 2.1.32 [Flags: R/O]. <5>[ 3.688480] Key type asymmetric registered <5>[ 3.693008] Asymmetric key parser 'x509' registered <6>[ 3.698345] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) <6>[ 3.706245] io scheduler mq-deadline registered <6>[ 3.711170] io scheduler kyber registered <3>[ 3.864693] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.873395] omap_gpio 44e07000.gpio: Could not register gpio chip -517 <4>[ 3.992766] ti-sysc: probe of 44e31000.target-module failed with error -16 <4>[ 4.037930] ti-sysc: probe of 48040000.target-module failed with error -16 <3>[ 4.115977] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 4.124672] omap_gpio 4804c000.gpio: Could not register gpio chip -517 <3>[ 4.189819] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 4.198514] omap_gpio 481ac000.gpio: Could not register gpio chip -517 <3>[ 4.217074] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 4.225757] omap_gpio 481ae000.gpio: Could not register gpio chip -517 <3>[ 4.294474] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present! <6>[ 4.302987] edma 49000000.dma: TI EDMA DMA engine driver <6>[ 4.346454] pinctrl-single 44e10800.pinmux: 142 pins, size 568 <6>[ 4.453518] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled <6>[ 4.465994] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 20, base_baud = 3000000) is a 8250 <6>[ 4.475424] printk: console [ttyS0] enabled <6>[ 4.475424] printk: console [ttyS0] enabled <6>[ 4.484488] printk: bootconsole [omap8250] disabled <6>[ 4.484488] printk: bootconsole [omap8250] disabled <6>[ 4.498442] SuperH (H)SCI(F) driver initialized <6>[ 4.505672] msm_serial: driver initialized <6>[ 4.510470] STMicroelectronics ASC driver initialized <6>[ 4.518802] STM32 USART driver initialized <6>[ 4.526315] omap_rng 48310000.rng: Random Number Generator ver. 20 <5>[ 4.546903] random: crng init done <6>[ 4.560182] brd: module loaded <6>[ 4.571180] loop: module loaded <6>[ 4.597354] CAN device driver interface <6>[ 4.603680] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded <6>[ 4.612004] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 4.617326] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 4.623678] igb: Intel(R) Gigabit Ethernet Network Driver <6>[ 4.629364] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 4.702110] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000 <6>[ 4.738582] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 <6>[ 4.748504] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4 <6>[ 4.755205] cpsw 4a100000.ethernet: ALE Table size 1024 <6>[ 4.761045] cpsw 4a100000.ethernet: Detected MACID = f4:b8:98:ab:fa:84 <6>[ 4.770242] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver <6>[ 4.778173] usbcore: registered new interface driver pegasus <6>[ 4.784216] usbcore: registered new interface driver asix <6>[ 4.789934] usbcore: registered new interface driver ax88179_178a <6>[ 4.796375] usbcore: registered new interface driver cdc_ether <6>[ 4.802571] usbcore: registered new interface driver smsc75xx <6>[ 4.808643] usbcore: registered new interface driver smsc95xx <6>[ 4.814731] usbcore: registered new interface driver net1080 <6>[ 4.820705] usbcore: registered new interface driver cdc_subset <6>[ 4.826960] usbcore: registered new interface driver zaurus <6>[ 4.832902] usbcore: registered new interface driver cdc_ncm <6>[ 4.844803] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>[ 4.851640] ehci-pci: EHCI PCI platform driver <6>[ 4.856476] ehci-platform: EHCI generic platform driver <6>[ 4.862568] ehci-orion: EHCI orion driver <6>[ 4.867230] SPEAr-ehci: EHCI SPEAr driver <6>[ 4.871816] ehci-st: EHCI STMicroelectronics driver <6>[ 4.877354] ehci-exynos: EHCI Exynos driver <6>[ 4.882171] ehci-atmel: EHCI Atmel driver <6>[ 4.886779] tegra-ehci: Tegra EHCI driver <6>[ 4.891413] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver <6>[ 4.897979] ohci-pci: OHCI PCI platform driver <6>[ 4.902814] ohci-platform: OHCI generic platform driver <6>[ 4.908787] SPEAr-ohci: OHCI SPEAr driver <6>[ 4.913459] ohci-st: OHCI STMicroelectronics driver <6>[ 4.918933] ohci-atmel: OHCI Atmel driver <6>[ 4.925280] usbcore: registered new interface driver usb-storage <6>[ 4.943008] i2c /dev entries driver <5>[ 4.976500] cpuidle: enable-method property 'ti,am3352' found operations <6>[ 4.984916] sdhci: Secure Digital Host Controller Interface driver <6>[ 4.991399] sdhci: Copyright(c) Pierre Ossman <6>[ 5.000695] Synopsys Designware Multimedia Card Interface Driver <6>[ 5.010237] sdhci-pltfm: SDHCI platform and OF driver helper <4>[ 5.025536] sdhci-omap 481d8000.mmc: supply vqmmc not found, using dummy regulator <6>[ 5.085395] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 5.095025] usbcore: registered new interface driver usbhid <6>[ 5.100964] usbhid: USB HID core driver <6>[ 5.114964] NET: Registered protocol family 10 <6>[ 5.121169] Segment Routing with IPv6 <6>[ 5.125277] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 5.132303] NET: Registered protocol family 17 <6>[ 5.137052] can: controller area network core <6>[ 5.141769] NET: Registered protocol family 29 <6>[ 5.146556] can: raw protocol <6>[ 5.149803] can: broadcast manager protocol <6>[ 5.154296] can: netlink gateway - max_hops=1 <5>[ 5.159709] Key type dns_resolver registered <6>[ 5.164477] ThumbEE CPU extension supported. <5>[ 5.169049] Registering SWP/SWPB emulation handler <3>[ 5.174597] omap_voltage_late_init: Voltage driver support not added <6>[ 5.182860] mmc1: SDHCI controller on 481d8000.mmc [481d8000.mmc] using External DMA <5>[ 5.191610] Loading compiled-in X.509 certificates <6>[ 5.213166] OMAP GPIO hardware version 0.1 <4>[ 5.242678] tps65217-pmic: Failed to locate of_node [id: -1] <4>[ 5.255937] tps65217-bl: Failed to locate of_node [id: -1] <6>[ 5.271214] tps65217 0-0024: TPS65217 ID 0xe version 1.2 <4>[ 5.277578] at24 0-0050: supply vcc not found, using dummy regulator <6>[ 5.284981] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write <6>[ 5.292969] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz <4>[ 5.302946] at24 2-0054: supply vcc not found, using dummy regulator <6>[ 5.312959] mmc1: new high speed MMC card at address 0001 <6>[ 5.319536] mmcblk1: mmc1:0001 MK2704 3.53 GiB <6>[ 5.324785] mmcblk1boot0: mmc1:0001 MK2704 partition 1 2.00 MiB <6>[ 5.331307] mmcblk1boot1: mmc1:0001 MK2704 partition 2 2.00 MiB <6>[ 5.337958] mmcblk1rpmb: mmc1:0001 MK2704 partition 3 512 KiB, chardev (235:0) <6>[ 5.347487] mmcblk1: p1 <4>[ 5.351621] at24 2-0055: supply vcc not found, using dummy regulator <4>[ 5.384798] at24 2-0056: supply vcc not found, using dummy regulator <4>[ 5.416148] at24 2-0057: supply vcc not found, using dummy regulator <6>[ 5.455174] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz <6>[ 5.479055] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22) <6>[ 5.488238] sdhci-omap 48060000.mmc: Got CD GPIO <4>[ 5.493369] sdhci-omap 48060000.mmc: supply vqmmc not found, using dummy regulator <6>[ 5.581356] mmc0: SDHCI controller on 48060000.mmc [48060000.mmc] using External DMA <6>[ 5.593433] cpsw 4a100000.ethernet: initializing cpsw version 1.12 (0) <6>[ 5.683936] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL) <6>[ 8.833028] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off <6>[ 8.852232] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 8.882231] Sending DHCP requests ., OK <6>[ 8.926345] IP-Config: Got DHCP answer from 192.168.1.1, my address is 192.168.1.81 <6>[ 8.934410] IP-Config: Complete: <6>[ 8.937952] device=eth0, hwaddr=f4:b8:98:ab:fa:84, ipaddr=192.168.1.81, mask=255.255.255.0, gw=192.168.1.1 <6>[ 8.948455] host=192.168.1.81, domain=example.org, nis-domain=(none) <6>[ 8.955624] bootserver=0.0.0.0, rootserver=0.0.0.0, rootpath= <6>[ 8.955645] nameserver0=192.168.1.1 <6>[ 8.979492] Freeing unused kernel memory: 2048K <6>[ 9.003303] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 9.206572] udevd[97]: starting version 3.2.9 <27>[ 9.222964] udevd[97]: specified user 'tss' unknown <27>[ 9.228461] udevd[97]: specified group 'tss' unknown <30>[ 9.244105] udevd[98]: starting eudev-3.2.9 <4>[ 10.938399] am335x-phy-driver 47401300.usb-phy: supply vcc not found, using dummy regulator <4>[ 10.947583] am335x-phy-driver 47401300.usb-phy: dummy supplies not allowed for exclusive requests <4>[ 11.193610] am335x-phy-driver 47401b00.usb-phy: supply vcc not found, using dummy regulator <4>[ 11.202717] am335x-phy-driver 47401b00.usb-phy: dummy supplies not allowed for exclusive requests <6>[ 11.399433] musb-hdrc musb-hdrc.1: MUSB HDRC host driver <6>[ 11.405278] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 11.620100] hub 1-0:1.0: USB hub found <6>[ 11.672287] hub 1-0:1.0: 1 port detected done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-994718/environment . /lava-994718/environment / # /lava-994718/bin/lava-test-runner /lava-994718/0 /lava-994718/bin/lava-test-runner /lava-994718/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-994718/0/tests/0_dmesg + cat uuid + UUID=994718_1.5.2.4.1 + <8>[ 16.526587] set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 16.583248] <8>[ 16.635056] <8>[ 16.686528] + set +x <8>[ 16.697380] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-994718/environment / # . /lava-994718/environment/lava-994718/bin/lava-test-runner /lava-994718/1 / # /lava-994718/bin/lava-test-runner /lava-994718/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-994718/1/tests/1_bootrr + cat uuid + UUID=994718_1.5.2.4.5 + <8>[ 17.238748] set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-994718/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto sound /lava-994718/1/../bin/lava-test-case <8>[ 18.323399] /lava-994718/1/../bin/lava-test-case <8>[ 18.376202] /lava-994718/1/../bin/lava-test-case <8>[ 18.405963] /lava-994718/1/../bin/lava-test-case <8>[ 18.460432] /lava-994718/1/../bin/lava-test-case <8>[ 18.506927] /lava-994718/1/../bin/lava-test-case <8>[ 18.544062] /lava-994718/1/../bin/lava-test-case <8>[ 18.590226] /lava-994718/1/../bin/lava-test-case <8>[ 18.635736] /lava-994718/1/../bin/lava-test-case <8>[ 18.672655] /lava-994718/1/../bin/lava-test-case <8>[ 18.718275] /lava-994718/1/../bin/lava-test-case <8>[ 19.791941] /lava-994718/1/../bin/lava-test-case <8>[ 20.858652] /lava-994718/1/../bin/lava-test-case <8>[ 20.895214] /lava-994718/1/../bin/lava-test-case <8>[ 20.931025] /lava-994718/1/../bin/lava-test-case <8>[ 20.968316] /lava-994718/1/../bin/lava-test-case <8>[ 21.013858] /lava-994718/1/../bin/lava-test-case <8>[ 21.051182] /lava-994718/1/../bin/lava-test-case <8>[ 21.097770] /lava-994718/1/../bin/lava-test-case <8>[ 21.142998] /lava-994718/1/../bin/lava-test-case <8>[ 21.179729] /lava-994718/1/../bin/lava-test-case <8>[ 21.226586] /lava-994718/1/../bin/lava-test-case <8>[ 21.272846] /lava-994718/1/../bin/lava-test-case <8>[ 21.310385] /lava-994718/1/../bin/lava-test-case <8>[ 21.357224] /lava-994718/1/../bin/lava-test-case <8>[ 21.395254] /lava-994718/1/../bin/lava-test-case <8>[ 21.440628] /lava-994718/1/../bin/lava-test-case <8>[ 22.501185] /lava-994718/1/../bin/lava-test-case <8>[ 23.562521] /lava-994718/1/../bin/lava-test-case <8>[ 23.600225] /lava-994718/1/../bin/lava-test-case <8>[ 23.647121] /lava-994718/1/../bin/lava-test-case <8>[ 23.684772] /lava-994718/1/../bin/lava-test-case <8>[ 23.730248] /lava-994718/1/../bin/lava-test-case <8>[ 24.790496] /lava-994718/1/../bin/lava-test-case <8>[ 25.851451] /lava-994718/1/../bin/lava-test-case <8>[ 25.888579] /lava-994718/1/../bin/lava-test-case <8>[ 25.935140] /lava-994718/1/../bin/lava-test-case <8>[ 26.998272] /lava-994718/1/../bin/lava-test-case <8>[ 28.060823] /lava-994718/1/../bin/lava-test-case <8>[ 29.122344] /lava-994718/1/../bin/lava-test-case <8>[ 30.187515] /lava-994718/1/../bin/lava-test-case <8>[ 31.250078] /lava-994718/1/../bin/lava-test-case <8>[ 32.311451] /lava-994718/1/../bin/lava-test-case <8>[ 33.372643] /lava-994718/1/../bin/lava-test-case <8>[ 34.438483] /lava-994718/1/../bin/lava-test-case <8>[ 35.500212] /lava-994718/1/../bin/lava-test-case <8>[ 36.561538] /lava-994718/1/../bin/lava-test-case <8>[ 37.622498] /lava-994718/1/../bin/lava-test-case <8>[ 38.688077] /lava-994718/1/../bin/lava-test-case <8>[ 39.750711] /opt/bootrr/libexec/bootrr/boards/ti,am335x-bone-black: line 84: assert_device-present: not found /lava-994718/1/../bin/lava-test-case <8>[ 39.789457] /lava-994718/1/../bin/lava-test-case <8>[ 40.860418] /lava-994718/1/../bin/lava-test-case <8>[ 41.920429] + set +x <8>[ 41.935952] / #