[Enter `^Ec?' for help] U-Boot 2016.03-rc1-00131-g39af3d8-dirty (Feb 09 2016 - 16:39:49 +0000) DRAM: 944 MiB WARNING: Caches not enabled RPI Model B+ (0x10) MMC: bcm2835_sdhci: 0 reading uboot.env In: serial Out: lcd Err: lcd Net: Net Initialization Skipped No ethernet found. starting USB... USB0: Core Release: 2.80a scanning bus 0 for devices... 4 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found Hit any key to stop autoboot: 2  0 U-Boot> usb start usb start U-Boot> setenv autoload no setenv autoload no U-Boot> setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff U-Boot> setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff U-Boot> dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.201.14 (259 ms) U-Boot> setenv serverip 192.168.201.1 setenv serverip 192.168.201.1 U-Boot> tftp 0x01000000 11517445/tftp-deploy-e7c6mzn0/kernel/zImage tftp 0x01000000 11517445/tftp-deploy-e7c6mzn0/kernel/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.201.1; our IP address is 192.168.201.14 Filename '11517445/tftp-deploy-e7c6mzn0/kernel/zImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ###### 541 KiB/s done Bytes transferred = 5813232 (58b3f0 hex) U-Boot> tftp 0x02200000 11517445/tftp-deploy-e7c6mzn0/ramdisk/ramdisk.cpio.gz.uboot tftp 0x02200000 11517445/tftp-deploy-e7c6mzn0/ramdisk/ramdisk.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.201.1; our IP address is 192.168.201.14 Filename '11517445/tftp-deploy-e7c6mzn0/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x2200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################## 1013.7 KiB/s done Bytes transferred = 9259722 (8d4aca hex) U-Boot> setenv initrd_size ${filesize} setenv initrd_size ${filesize} U-Boot> tftp 0x00000100 11517445/tftp-deploy-e7c6mzn0/dtb/bcm2836-rpi-2-b.dtb tftp 0x00000100 11517445/tftp-deploy-e7c6mzn0/dtb/bcm2836-rpi-2-b.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.201.1; our IP address is 192.168.201.14 Filename '11517445/tftp-deploy-e7c6mzn0/dtb/bcm2836-rpi-2-b.dtb'. Load address: 0x100 Loading: *# 890.6 KiB/s done Bytes transferred = 13687 (3577 hex) U-Boot> setenv bootargs 'console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' U-Boot> bootz 0x01000000 0x02200000 0x00000100 bootz 0x01000000 0x02200000 0x00000100 Kernel image @ 0x1000000 [ 0x000000 - 0x58b3f0 ] ## Loading init Ramdisk from Legacy Image at 02200000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 9259658 Bytes = 8.8 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 00000100 Booting using the fdt blob at 0x000100 reserving fdt memory region: addr=0 size=1000 Using Device Tree in place at 00000100, end 00006676 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.191-cip38 (KernelCI@build-j44565-arm-gcc-10-bcm2835-defconfig-c58lc) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 Wed Sep 13 16:09:04 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 2 Model B [ 0.000000] earlycon: pl11 at MMIO 0x3f201000 (options '115200n8') [ 0.000000] printk: bootconsole [pl11] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Ignoring RAM at 0x30000000-0x3b000000 [ 0.000000] Consider using a HIGHMEM enabled kernel. [ 0.000000] Reserved memory: created CMA memory pool at 0x2c000000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm/kernel/devtree.c:148 arm_dt_init_cpu_maps+0x1b8/0x200 [ 0.000000] DT /cpu 2 nodes greater than max cores 1, capping them [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.10.191-cip38 #1 [ 0.000000] Hardware name: BCM2835 [ 0.000000] Backtrace: [ 0.000000] [] (dump_backtrace) from [] (show_stack+0x20/0x24) [ 0.000000] r7:c0e01edc r6:00000000 r5:00000009 r4:c0bbe658 [ 0.000000] [] (show_stack) from [] (dump_stack+0x28/0x30) [ 0.000000] [] (dump_stack) from [] (__warn+0x9c/0xdc) [ 0.000000] r5:00000009 r4:c0b350cc [ 0.000000] [] (__warn) from [] (warn_slowpath_fmt+0x88/0xcc) [ 0.000000] r9:c0f75bc8 r8:c0b35145 r7:00000009 r6:c0d04ce8 r5:00000094 r4:c0b350cc [ 0.000000] [] (warn_slowpath_fmt) from [] (arm_dt_init_cpu_maps+0x1b8/0x200) [ 0.000000] r8:c0b35079 r7:00000000 r6:ff000000 r5:00000000 r4:eb9d96c4 [ 0.000000] [] (arm_dt_init_cpu_maps) from [] (setup_arch+0x26c/0x644) [ 0.000000] r10:c0e01f70 r9:c0e01f68 r8:ebffff00 r7:c0bcc0c8 r6:2fffffff r5:c0e08738 [ 0.000000] r4:c0d3410c [ 0.000000] [] (setup_arch) from [] (start_kernel+0x64/0x51c) [ 0.000000] r10:10c53c7d r9:410fc075 r8:00000100 r7:c0f8f03c r6:c0e04240 r5:00000051 [ 0.000000] r4:c0d004b0 [ 0.000000] [] (start_kernel) from [<00000000>] (0x0) [ 0.000000] r9:410fc075 r8:00000100 r7:00000000 r6:10c03c7d r5:00000051 r4:c0d004b0 [ 0.000000] ---[ end trace 58996bc4bee07162 ]--- [ 0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 195072 [ 0.000000] Kernel command line: console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 689064K/786432K available (8192K kernel code, 1595K rwdata, 3252K rodata, 1024K init, 709K bss, 31832K reserved, 65536K cma-reserved) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 <6>[ 0.000000] ftrace: allocating 32729 entries in 96 pages <6>[ 0.000000] ftrace: allocated 96 pages with 2 groups <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <3>[ 0.000000] [Firmware Bug]: Bootloader left irq enabled: bank 1 irq 9 <6>[ 0.000019] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns <6>[ 0.008817] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns <6>[ 0.018640] bcm2835: system timer (irq = 27) <6>[ 0.023747] arch_timer: cp15 timer(s) running at 19.20MHz (virt). <6>[ 0.030240] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns <6>[ 0.041509] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns <6>[ 0.049940] Switching to timer-based delay loop, resolution 52ns <6>[ 0.056732] Console: colour dummy device 80x30 <6>[ 0.061599] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) <6>[ 0.072445] CPU: Testing write buffer coherency: ok <6>[ 0.077752] pid_max: default: 32768 minimum: 301 <6>[ 0.083124] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.090860] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.101140] Setting up static identity map for 0x100000 - 0x100054 <6>[ 0.109400] devtmpfs: initialized <6>[ 0.119063] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 <6>[ 0.127471] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.137829] futex hash table entries: 256 (order: -1, 3072 bytes, linear) <6>[ 0.148308] pinctrl core: initialized pinctrl subsystem <6>[ 0.155939] NET: Registered protocol family 16 <6>[ 0.162910] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.173585] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.174092] No ATAGs? <6>[ 0.183127] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. <6>[ 0.191554] hw-breakpoint: maximum watchpoint size is 8 bytes. <6>[ 0.198097] Serial: AMBA PL011 UART driver <6>[ 0.223407] Kprobes globally optimized <5>[ 0.232871] SCSI subsystem initialized <6>[ 0.237286] usbcore: registered new interface driver usbfs <6>[ 0.243292] usbcore: registered new interface driver hub <6>[ 0.249032] usbcore: registered new device driver usb <4>[ 0.254719] usb_phy_generic phy: supply vcc not found, using dummy regulator <4>[ 0.262365] usb_phy_generic phy: dummy supplies not allowed for exclusive requests <6>[ 0.270628] mc: Linux media interface: v0.10 <6>[ 0.275292] videodev: Linux video capture interface: v2.00 <6>[ 0.281436] Advanced Linux Sound Architecture Driver Initialized. <6>[ 0.288671] Bluetooth: Core ver 2.22 <6>[ 0.292696] NET: Registered protocol family 31 <6>[ 0.297497] Bluetooth: HCI device and connection manager initialized <6>[ 0.304266] Bluetooth: HCI socket layer initialized <6>[ 0.309510] Bluetooth: L2CAP socket layer initialized <6>[ 0.314957] Bluetooth: SCO socket layer initialized <6>[ 0.320809] clocksource: Switched to clocksource arch_sys_counter <6>[ 0.572087] simple-framebuffer 3b006000.framebuffer: framebuffer at 0x3b006000, 0x85400 bytes, mapped to 0x(ptrval) <6>[ 0.583084] simple-framebuffer 3b006000.framebuffer: format=r5g6b5, mode=656x416x16, linelength=1312 <6>[ 0.596469] Console: switching to colour frame buffer device 82x26 <6>[ 0.606081] simple-framebuffer 3b006000.framebuffer: fb0: simplefb registered! <6>[ 0.623767] NET: Registered protocol family 2 <6>[ 0.628977] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 0.638400] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) <6>[ 0.647290] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 0.655545] TCP bind hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 0.663183] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 0.670145] UDP hash table entries: 512 (order: 1, 8192 bytes, linear) <6>[ 0.677109] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes, linear) <6>[ 0.684696] NET: Registered protocol family 1 <6>[ 0.690190] RPC: Registered named UNIX socket transport module. <6>[ 0.696531] RPC: Registered udp transport module. <6>[ 0.701604] RPC: Registered tcp transport module. <6>[ 0.706662] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.715460] Unpacking initramfs... <6>[ 1.514888] Freeing initrd memory: 9044K <6>[ 1.520381] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available <5>[ 1.530568] Initialise system trusted keyrings <6>[ 1.535771] workingset: timestamp_bits=30 max_order=18 bucket_order=0 <6>[ 1.553031] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). <5>[ 1.679384] Key type asymmetric registered <5>[ 1.683993] Asymmetric key parser 'x509' registered <6>[ 1.689307] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) <6>[ 1.697134] io scheduler mq-deadline registered <6>[ 1.702028] io scheduler kyber registered <6>[ 1.714852] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled <6>[ 1.727040] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver <6>[ 1.738376] usbcore: registered new interface driver zd1211rw <6>[ 1.744655] usbcore: registered new interface driver lan78xx <6>[ 1.750759] usbcore: registered new interface driver asix <6>[ 1.756611] usbcore: registered new interface driver ax88179_178a <6>[ 1.763148] usbcore: registered new interface driver cdc_ether <6>[ 1.769435] usbcore: registered new interface driver smsc95xx <6>[ 1.775621] usbcore: registered new interface driver net1080 <6>[ 1.781761] usbcore: registered new interface driver cdc_subset <6>[ 1.788107] usbcore: registered new interface driver zaurus <6>[ 1.794160] usbcore: registered new interface driver cdc_ncm <6>[ 1.800853] usbcore: registered new interface driver usb-storage <6>[ 1.807441] i2c /dev entries driver <4>[ 1.813694] i2c-bcm2835 3f805000.i2c: Could not read clock-frequency property <6>[ 1.823187] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer <6>[ 1.830371] sdhci: Secure Digital Host Controller Interface driver <6>[ 1.836978] sdhci: Copyright(c) Pierre Ossman <6>[ 1.842012] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 1.848866] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 1.856417] usbcore: registered new interface driver usbhid <6>[ 1.862397] usbhid: USB HID core driver <6>[ 1.866744] bcm2835-mbox 3f00b880.mailbox: mailbox enabled <6>[ 1.874768] NET: Registered protocol family 10 <6>[ 1.881004] Segment Routing with IPv6 <6>[ 1.885132] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 1.892354] NET: Registered protocol family 17 <6>[ 1.897717] oprofile: using timer interrupt. <5>[ 1.902883] Loading compiled-in X.509 certificates <6>[ 1.914723] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 81, base_baud = 0) is a PL011 rev2 <6>[ 1.924234] printk: console [ttyAMA0] enabled <6>[ 1.924234] printk: console [ttyAMA0] enabled <6>[ 1.933577] printk: bootconsole [pl11] disabled <6>[ 1.933577] printk: bootconsole [pl11] disabled <6>[ 1.947278] raspberrypi-firmware soc:firmware: Attached to firmware from 2014-12-19T18:44:06 <4>[ 1.958842] ------------[ cut here ]------------ <4>[ 1.963793] WARNING: CPU: 0 PID: 44 at drivers/cpufreq/cpufreq-dt.c:79 dt_cpufreq_probe+0xf8/0x2f0 <4>[ 1.973018] Modules linked in: <4>[ 1.976344] CPU: 0 PID: 44 Comm: kworker/0:2 Tainted: G W 5.10.191-cip38 #1 <4>[ 1.984866] Hardware name: BCM2835 <4>[ 1.988545] Workqueue: events deferred_probe_work_func <4>[ 1.993950] Backtrace: <4>[ 1.996673] [] (dump_backtrace) from [] (show_stack+0x20/0x24) <4>[ 2.004508] r7:00000000 r6:00000000 r5:00000009 r4:c0bbe658 <4>[ 2.010430] [] (show_stack) from [] (dump_stack+0x28/0x30) <4>[ 2.017928] [] (dump_stack) from [] (__warn+0x9c/0xdc) <4>[ 2.025064] r5:00000009 r4:c0ba71ca <4>[ 2.028904] [] (__warn) from [] (warn_slowpath_fmt+0x88/0xcc) <4>[ 2.036652] r9:c470bbc8 r8:00000000 r7:00000009 r6:c062f5ac r5:0000004f r4:c0ba71ca <4>[ 2.044663] [] (warn_slowpath_fmt) from [] (dt_cpufreq_probe+0xf8/0x2f0) <4>[ 2.053364] r8:00000000 r7:c470aa10 r6:c470bbc0 r5:c0e08868 r4:00000000 <4>[ 2.060325] [] (dt_cpufreq_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.069046] r10:00000003 r9:c103180c r8:00000000 r7:c1031804 r6:c0f35fd4 r5:c470aa10 <4>[ 2.077136] r4:00000000 <4>[ 2.079937] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.088463] r7:c1031804 r6:c0f35fd4 r5:00000000 r4:c470aa10 <4>[ 2.094396] [] (really_probe) from [] (driver_probe_device+0x194/0x1bc) <4>[ 2.103011] r10:00000003 r9:00000000 r8:c0f256c8 r7:c470aa10 r6:c46bd7fc r5:c0f35fd4 <4>[ 2.111103] r4:c470aa10 <4>[ 2.113906] [] (driver_probe_device) from [] (__device_attach_driver+0xb8/0xf8) <4>[ 2.123213] r8:c0f256c8 r7:c470aa10 r6:c46bd7fc r5:c0f35fd4 r4:00000001 <4>[ 2.130174] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.139220] r7:c470aa54 r6:c051e214 r5:c46bd7fc r4:00000000 <4>[ 2.145152] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.153676] r6:c470aa10 r5:00000001 r4:c470aa10 <4>[ 2.158557] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.167343] r7:00000000 r6:c470aa10 r5:c0f25670 r4:c470aa10 <4>[ 2.173296] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.182177] [] (bus_probe_device) from [] (device_add+0x5d4/0x6f8) <4>[ 2.190345] r7:00000000 r6:c0f25368 r5:00000000 r4:c470aa10 <4>[ 2.196275] [] (device_add) from [] (platform_device_add+0x190/0x1f8) <4>[ 2.204718] r9:c0e0b420 r8:c0e0b400 r7:05f5e100 r6:00000000 r5:00000000 r4:c470aa00 <4>[ 2.212728] [] (platform_device_add) from [] (platform_device_register_full+0xf0/0x124) <4>[ 2.222730] r9:05f5e0ff r8:2faf0800 r7:05f5e100 r6:c46bd8e0 r5:00000000 r4:c470aa00 <4>[ 2.230731] [] (platform_device_register_full) from [] (raspberrypi_cpufreq_probe+0x10c/0x198) <4>[ 2.241337] r7:05f5e100 r6:c0e08868 r5:00000000 r4:00000000 <4>[ 2.247258] [] (raspberrypi_cpufreq_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.256744] r9:c103180c r8:00000000 r7:c1031804 r6:c0f360cc r5:c470a610 r4:00000000 <4>[ 2.264756] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.273285] r7:c1031804 r6:c0f360cc r5:00000000 r4:c470a610 <4>[ 2.279207] [] (really_probe) from [] (driver_probe_device+0x194/0x1bc) <4>[ 2.287828] r10:c470b340 r9:00000000 r8:c470a410 r7:c470a610 r6:c46bda2c r5:c0f360cc <4>[ 2.295927] r4:c470a610 <4>[ 2.298729] [] (driver_probe_device) from [] (__device_attach_driver+0xb8/0xf8) <4>[ 2.308037] r8:c470a410 r7:c470a610 r6:c46bda2c r5:c0f360cc r4:00000001 <4>[ 2.315010] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.324056] r7:c470a654 r6:c051e214 r5:c46bda2c r4:00000000 <4>[ 2.329977] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.338501] r6:c470a610 r5:00000001 r4:c470a610 <4>[ 2.343393] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.352179] r7:00000000 r6:c470a610 r5:c0f25670 r4:c470a610 <4>[ 2.358100] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.366979] [] (bus_probe_device) from [] (device_add+0x5d4/0x6f8) <4>[ 2.375158] r7:00000000 r6:c0f25368 r5:00000000 r4:c470a610 <4>[ 2.381088] [] (device_add) from [] (platform_device_add+0x190/0x1f8) <4>[ 2.389520] r9:c0e0b420 r8:c0e0b400 r7:00000000 r6:00000000 r5:00000000 r4:c470a600 <4>[ 2.397535] [] (platform_device_add) from [] (platform_device_register_full+0xf0/0x124) <4>[ 2.407538] r9:c470a410 r8:c4705150 r7:00000000 r6:c46bdb18 r5:00000000 r4:c470a600 <4>[ 2.415556] [] (platform_device_register_full) from [] (raspberrypi_clk_probe+0x160/0x31c) <4>[ 2.425814] r7:00000000 r6:00000000 r5:c470b2c0 r4:00000000 <4>[ 2.431746] [] (raspberrypi_clk_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.440881] r10:00000003 r9:c103180c r8:00000000 r7:c1031804 r6:c0f1f80c r5:c470a410 <4>[ 2.448957] r4:00000000 <4>[ 2.451767] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.460283] r7:c1031804 r6:c0f1f80c r5:00000000 r4:c470a410 <4>[ 2.466215] [] (really_probe) from [] (driver_probe_device+0x194/0x1bc) <4>[ 2.474831] r10:00000003 r9:00000000 r8:c1594c10 r7:c470a410 r6:c46bdc6c r5:c0f1f80c <4>[ 2.482921] r4:c470a410 <4>[ 2.485723] [] (driver_probe_device) from [] (__device_attach_driver+0xb8/0xf8) <4>[ 2.495031] r8:c1594c10 r7:c470a410 r6:c46bdc6c r5:c0f1f80c r4:00000001 <4>[ 2.502007] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.511054] r7:c470a454 r6:c051e214 r5:c46bdc6c r4:00000000 <4>[ 2.516975] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.525499] r6:c470a410 r5:00000001 r4:c470a410 <4>[ 2.530381] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.539167] r7:00000000 r6:c470a410 r5:c0f25670 r4:c470a410 <4>[ 2.545099] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.553978] [] (bus_probe_device) from [] (device_add+0x5d4/0x6f8) <4>[ 2.562157] r7:00000000 r6:c0f25368 r5:00000000 r4:c470a410 <4>[ 2.568076] [] (device_add) from [] (platform_device_add+0x190/0x1f8) <4>[ 2.576517] r9:c0e0b420 r8:c0e0b400 r7:c1594c00 r6:00000000 r5:00000000 r4:c470a400 <4>[ 2.584529] [] (platform_device_add) from [] (platform_device_register_full+0xf0/0x124) <4>[ 2.594531] r9:c103180c r8:00000001 r7:c1594c00 r6:c46bdd58 r5:00000000 r4:c470a400 <4>[ 2.602548] [] (platform_device_register_full) from [] (rpi_firmware_probe+0x1a4/0x1ec) <4>[ 2.612552] r7:c1594c00 r6:c1594c10 r5:c47092c0 r4:00000000 <4>[ 2.618472] [] (rpi_firmware_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.627346] r8:00000000 r7:c1031804 r6:c0f379ec r5:c1594c10 r4:00000000 <4>[ 2.634317] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.642843] r7:c1031804 r6:c0f379ec r5:00000000 r4:c1594c10 <4>[ 2.648765] [] (really_probe) from [] (driver_probe_device+0x194/0x1bc) <4>[ 2.657380] r10:c0f255c4 r9:00000000 r8:00000000 r7:c1594c10 r6:c46bdea4 r5:c0f379ec <4>[ 2.665467] r4:c1594c10 <4>[ 2.668268] [] (driver_probe_device) from [] (__device_attach_driver+0xb8/0xf8) <4>[ 2.677576] r8:00000000 r7:c1594c10 r6:c46bdea4 r5:c0f379ec r4:00000001 <4>[ 2.684548] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.693597] r7:c1594c54 r6:c051e214 r5:c46bdea4 r4:00000000 <4>[ 2.699518] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.708042] r6:c1594c10 r5:00000001 r4:c1594c10 <4>[ 2.712935] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.721725] r7:eb9c7300 r6:c1594c10 r5:c0f25670 r4:c1594c10 <4>[ 2.727646] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.736526] [] (bus_probe_device) from [] (deferred_probe_work_func+0xa8/0xcc) <4>[ 2.745746] r7:eb9c7300 r6:c0f255e8 r5:c0f255ac r4:c1594c10 <4>[ 2.751680] [] (deferred_probe_work_func) from [] (process_one_work+0x194/0x274) <4>[ 2.761073] r7:eb9c7300 r6:c0e0d160 r5:c0f255c0 r4:c46a1c80 <4>[ 2.766992] [] (process_one_work) from [] (worker_thread+0x220/0x2e0) <4>[ 2.775434] r10:c46a7760 r9:c0f8fabc r8:c0e0d174 r7:c0edcaa0 r6:c0e0d160 r5:c46a1c94 <4>[ 2.783520] r4:c46a1c80 <4>[ 2.786322] [] (worker_thread) from [] (kthread+0x11c/0x128) <4>[ 2.793984] r9:c1531e98 r8:c46a1c80 r7:c0134e98 r6:c46bc000 r5:c46a0c80 r4:c46a7740 <4>[ 2.801996] [] (kthread) from [] (ret_from_fork+0x14/0x2c) <4>[ 2.809468] Exception stack(0xc46bdfb0 to 0xc46bdff8) <4>[ 2.814786] dfa0: 00000000 00000000 00000000 00000000 <4>[ 2.823225] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 <4>[ 2.831669] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 <4>[ 2.838540] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0139998 <4>[ 2.846628] r4:c46a0c80 r3:00000001 <4>[ 2.850458] ---[ end trace 58996bc4bee07164 ]--- <6>[ 2.855381] sdhost-bcm2835 3f202000.mmc: loaded - DMA enabled (>1) <4>[ 2.864411] dwc2 3f980000.usb: supply vusb_d not found, using dummy regulator <4>[ 2.872057] dwc2 3f980000.usb: supply vusb_a not found, using dummy regulator <6>[ 2.931581] dwc2 3f980000.usb: DWC OTG Controller <6>[ 2.936585] dwc2 3f980000.usb: new USB bus registered, assigned bus number 1 <6>[ 2.944114] dwc2 3f980000.usb: irq 33, io mem 0x3f980000 <6>[ 2.950901] hub 1-0:1.0: USB hub found <6>[ 2.954995] hub 1-0:1.0: 1 port detected <4>[ 2.962457] OF: fdt: not creating '/sys/firmware/fdt': CRC check failed <4>[ 2.998334] mmc0: host does not support reading read-only switch, assuming write-enable <6>[ 3.008928] mmc0: new high speed SDHC card at address 0002 <6>[ 3.015721] mmcblk0: mmc0:0002 NCard 14.9 GiB <6>[ 3.023308] mmcblk0: p1 <6>[ 3.300838] usb 1-1: new high-speed USB device number 2 using dwc2 <6>[ 3.551901] hub 1-1:1.0: USB hub found <6>[ 3.556023] hub 1-1:1.0: 5 ports detected <6>[ 3.880856] usb 1-1.1: new high-speed USB device number 3 using dwc2 <6>[ 4.014132] smsc95xx v2.0.0 <6>[ 4.174430] SMSC LAN8700 usb-001:003:01: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=usb-001:003:01, irq=POLL) <6>[ 4.186961] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:d2:0e:1f <6>[ 4.255099] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup <6>[ 4.272408] smsc95xx 1-1.1:1.0 eth0: Link is Down <6>[ 4.300838] usb 1-1.3: new high-speed USB device number 4 using dwc2 <6>[ 4.437168] usb-storage 1-1.3:1.0: USB Mass Storage device detected <6>[ 4.444849] scsi host0: usb-storage 1-1.3:1.0 <5>[ 5.540516] scsi 0:0:0:0: Direct-Access Kingston DT 101 G2 PMAP PQ: 0 ANSI: 0 CCS <5>[ 5.850858] random: crng init done <5>[ 6.483055] sd 0:0:0:0: [sda] 7669824 512-byte logical blocks: (3.93 GB/3.66 GiB) <5>[ 6.491268] sd 0:0:0:0: [sda] Write Protect is off <3>[ 6.496767] sd 0:0:0:0: [sda] No Caching mode page found <3>[ 6.502378] sd 0:0:0:0: [sda] Assuming drive cache: write through <6>[ 6.541476] sda: sda1 sda2 <5>[ 6.548422] sd 0:0:0:0: [sda] Attached SCSI removable disk <6>[ 7.382441] smsc95xx 1-1.1:1.0 eth0: Link is Up - 100Mbps/Full - flow control off <6>[ 7.410881] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 7.441011] Sending DHCP requests .., OK <6>[ 9.905042] IP-Config: Got DHCP answer from 192.168.201.1, my address is 192.168.201.14 <6>[ 9.913335] IP-Config: Complete: <6>[ 9.916846] device=eth0, hwaddr=b8:27:eb:d2:0e:1f, ipaddr=192.168.201.14, mask=255.255.255.0, gw=192.168.201.1 <6>[ 9.927572] host=bcm2836-rpi-2-b-cbg-0, domain=lava-rack, nis-domain=(none) <6>[ 9.935256] bootserver=192.168.201.1, rootserver=192.168.201.1, rootpath= <6>[ 9.935263] nameserver0=192.168.201.1 <5>[ 9.947506] cfg80211: Loading compiled-in X.509 certificates for regulatory database <5>[ 9.977480] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' <4>[ 9.984846] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 <6>[ 9.994082] ALSA device list: <6>[ 9.997323] No soundcards found. <6>[ 10.001096] cfg80211: failed to load regulatory.db <6>[ 10.006607] uart-pl011 3f201000.serial: no DMA platform data <6>[ 10.019415] Freeing unused kernel memory: 1024K <6>[ 10.024610] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 10.256242] udevd[93]: starting version 3.2.9 <27>[ 10.275492] udevd[93]: specified user 'tss' unknown <27>[ 10.281412] udevd[93]: specified group 'tss' unknown <30>[ 10.292713] udevd[94]: starting eudev-3.2.9 <4>[ 10.646806] vchiq: module is from the staging directory, the quality is unknown, you have been warned. <6>[ 10.735185] bcm2835-rng 3f104000.rng: hwrng registered <3>[ 10.765301] bcm2835_vchiq 3f00b840.mailbox: failed to set channelbase <6>[ 10.772108] vchiq: could not load vchiq done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-11517445/environment . /lava-11517445/environment / # /lava-11517445/bin/lava-test-runner /lava-11517445/0 /lava-11517445/bin/lava-test-runner /lava-11517445/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-11517445/0/tests/0_dmesg + cat uuid + UUID=11517445_1.5.<8>[ 12.112650] 2.4.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 12.178078] <8>[ 12.238147] <8>[ 12.298571] + set +x <8>[ 12.309597] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-11517445/environment / # . /lava-11517445/environment/lava-11517445/bin/lava-test-runner /lava-11517445/1 / # /lava-11517445/bin/lava-test-runner /lava-11517445/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-11517445/1/tests/1_bootrr + cat uuid + UUID=11517445_1.5.<8>[ 12.823665] 2.4.5 + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-11517445/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto 3f902000.hdmi 3f806000.vec 3fc00000.v3d /lava-11517445/1/../bin/lava-test-case <8>[ 13.905568] /lava-11517445/1/../bin/lava-test-case <8>[ 13.960366] /lava-11517445/1/../bin/lava-test-case <8>[ 13.993750] + set +x <8>[ 14.018865] / #