connecting to NetworkSerialPort(target=Target(name='imx6dl-riotboard-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4011, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4011 connected to 10.8.254.5 (port 4011) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2023.01.0 #1 Fri Jan 27 16:21:21 CET 2023 Board: RIoTboard i.MX6S detected i.MX6 Solo revision 1.1 i.MX6 Solo unique ID: 132c61d4d72d78a9 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2194000.mmc@2194000.of: registered as mmc1 imx-esdhc 2198000.mmc@2198000.of: registered as mmc2 imx-esdhc 219c000.mmc@219c000.of: registered as mmc3 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-hdmi 120000.hdmi@120000.of: Detected HDMI controller 0x13:0x1a:0xa0:0xc1 netconsole: registered as netconsole-1 malloc space: 0x2fe7b320 -> 0x4fcf663f (size 510.5 MiB) mmc3: detected MMC card version 4.41 mmc3: registered mmc3.boot0 mmc3: registered mmc3.boot1 mmc3: registered mmc3 [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mRIoTboard i.MX6S:/[0m bootm -v -r /mnt/tftp/998653/tftp-deploy-6cr8gfhw/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/998653/tftp-deploy-6cr8gfhw/dtb/imx6dl-riotboard.dtb /mnt/tftp/998653/tftp-deploy-6cr8gfhw/kernel/zImage [1;32mbarebox@[1;36mRIoTboard i.MX6S:/[0m bootm -v -r /mnt/tftp/998653/tftp-deploy-6cr8gfhw/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/998653/tftp-deploy-6cr8gfhw/dtb/imx6dl-riotboard.dtb /mnt/tftp/998653/tftp-deploy-6cr8gfhw/kernel/zImage [1;33mWARNING:[0m eth0: No MAC address set. Using random address 02:b2:ef:c4:a8:83 eth0: 1000Mbps full duplex link detected T eth0: DHCP client bound to address 10.8.254.194 Loading ARM Linux zImage '/mnt/tftp/998653/tftp-deploy-6cr8gfhw/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x1325e000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/998653/tftp-deploy-6cr8gfhw/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x189b7a2d Loading devicetree from '/mnt/tftp/998653/tftp-deploy-6cr8gfhw/dtb/imx6dl-riotboard.dtb' commandline: console=ttymxc1,115200n8 Starting kernel at 0x1325e000, initrd at 0x18000000, oftree at 0x189b8000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.191-cip38 (KernelCI@build-j24648-arm-gcc-10-imx-v6-v7-defconfig-t4nv6) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Mon Aug 28 00:27:59 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: RIoTboard i.MX6S [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 64 MiB at 0x4a000000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000010000000-0x000000003fffffff] [ 0.000000] HighMem [mem 0x0000000040000000-0x000000004fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000010000000-0x000000004fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000004fffffff] [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] percpu: Embedded 20 pages/cpu s51948 r8192 d21780 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260608 [ 0.000000] Kernel command line: console=ttymxc1,115200n8 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 932492K/1048576K available (14336K kernel code, 2028K rwdata, 4852K rodata, 1024K init, 6664K bss, 50548K reserved, 65536K cma-reserved, 195512K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Running RCU self tests [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU lockdep checking is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 512 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76450001 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000008] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000041] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.001867] Console: colour dummy device 80x30 [ 0.001917] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001942] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001964] ... MAX_LOCK_DEPTH: 48 [ 0.001985] ... MAX_LOCKDEP_KEYS: 8192 [ 0.002007] ... CLASSHASH_SIZE: 4096 [ 0.002030] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.002051] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.002072] ... CHAINHASH_SIZE: 32768 [ 0.002094] memory used by lock dependency info: 4061 kB [ 0.002115] memory used for stack traces: 2112 kB [ 0.002135] per task-struct memory footprint: 1536 bytes [ 0.002258] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.002299] CPU: Testing write buffer coherency: ok [ 0.002444] CPU0: Spectre v2: using BPIALL workaround [ 0.002470] pid_max: default: 32768 minimum: 301 [ 0.002855] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.002901] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.007356] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.010290] Setting up static identity map for 0x10100000 - 0x10100078 [ 0.011003] rcu: Hierarchical SRCU implementation. [ 0.012833] smp: Bringing up secondary CPUs ... [ 0.012868] smp: Brought up 1 node, 1 CPU [ 0.012894] SMP: Total of 1 processors activated (6.00 BogoMIPS). [ 0.012918] CPU: All CPU(s) started in SVC mode. [ 0.015463] devtmpfs: initialized [ 0.046670] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.047832] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.047911] futex hash table entries: 256 (order: 2, 16384 bytes, linear) [ 0.050816] pinctrl core: initialized pinctrl subsystem [ 0.057005] NET: Registered protocol family 16 [ 0.081039] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.086177] thermal_sys: Registered thermal governor 'step_wise' [ 0.086498] cpuidle: using governor menu [ 0.086665] CPU identified as i.MX6DL, silicon rev 1.1 [ 0.503657] vdd1p1: supplied by regulator-dummy [ 0.522992] vdd3p0: supplied by regulator-dummy [ 0.542175] vdd2p5: supplied by regulator-dummy [ 0.561255] vddarm: supplied by regulator-dummy [ 0.580929] vddpu: supplied by regulator-dummy [ 0.599341] vddsoc: supplied by regulator-dummy [ 1.300075] No ATAGs? [ 1.300435] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 1.300524] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 1.305954] imx6dl-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver [ 1.415644] vgaarb: loaded [ 1.417791] SCSI subsystem initialized [ 1.419467] usbcore: registered new interface driver usbfs [ 1.419820] usbcore: registered new interface driver hub [ 1.419968] usbcore: registered new device driver usb [ 1.420357] usb_phy_generic usbphynop1: supply vcc not found, using dummy regulator [ 1.421234] usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests [ 1.421652] usb_phy_generic usbphynop2: supply vcc not found, using dummy regulator [ 1.422294] usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests [ 1.428320] i2c i2c-0: IMX I2C adapter registered [ 1.434561] i2c i2c-1: IMX I2C adapter registered [ 1.436466] i2c i2c-3: IMX I2C adapter registered [ 1.437249] mc: Linux media interface: v0.10 [ 1.437392] videodev: Linux video capture interface: v2.00 [ 1.438030] pps_core: LinuxPPS API ver. 1 registered [ 1.438058] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.438140] PTP clock support registered [ 1.439978] Advanced Linux Sound Architecture Driver Initialized. [ 1.444811] Bluetooth: Core ver 2.22 [ 1.444956] NET: Registered protocol family 31 [ 1.444984] Bluetooth: HCI device and connection manager initialized [ 1.445119] Bluetooth: HCI socket layer initialized [ 1.445166] Bluetooth: L2CAP socket layer initialized [ 1.445334] Bluetooth: SCO socket layer initialized [ 1.448113] clocksource: Switched to clocksource mxc_timer1 [ 2.821611] VFS: Disk quotas dquot_6.6.0 [ 2.821796] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.851808] NET: Registered protocol family 2 [ 2.852444] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 2.855476] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 22528 bytes, linear) [ 2.855626] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 2.855791] TCP bind hash table entries: 8192 (order: 6, 327680 bytes, linear) [ 2.856943] TCP: Hash tables configured (established 8192 bind 8192) [ 2.857534] UDP hash table entries: 512 (order: 3, 49152 bytes, linear) [ 2.857748] UDP-Lite hash table entries: 512 (order: 3, 49152 bytes, linear) [ 2.858491] NET: Registered protocol family 1 [ 2.861529] RPC: Registered named UNIX socket transport module. [ 2.861633] RPC: Registered udp transport module. [ 2.861659] RPC: Registered tcp transport module. [ 2.861685] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.863423] PCI: CLS 0 bytes, default 64 [ 2.865011] Trying to unpack rootfs image as initramfs... [ 4.044801] Freeing initrd memory: 9952K [ 4.046511] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 4.052067] Initialise system trusted keyrings [ 4.052947] workingset: timestamp_bits=30 max_order=18 bucket_order=0 [ 4.075342] NFS: Registering the id_resolver key type [ 4.075548] Key type id_resolver registered [ 4.075653] Key type id_legacy registered [ 4.075970] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 4.076093] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 4.076290] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 4.078150] fuse: init (API version 7.32) [ 4.173370] Key type asymmetric registered [ 4.173534] Asymmetric key parser 'x509' registered [ 4.173829] bounce: pool size: 64 pages [ 4.173975] io scheduler mq-deadline registered [ 4.174008] io scheduler kyber registered [ 4.201044] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 4.201163] imx-sdma 20ec000.sdma: Falling back to sysfs fallback for: imx/sdma/sdma-imx6q.bin [ 4.206865] mxs-dma 110000.dma-apbh: initialized [ 4.219741] pfuze100-regulator 0-0008: Full layer: 1, Metal layer: 1 [ 4.220661] pfuze100-regulator 0-0008: FAB: 0, FIN: 0 [ 4.220693] pfuze100-regulator 0-0008: pfuze100 found. [ 4.251676] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 32, base_baud = 5000000) is a IMX [ 4.256831] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 75, base_baud = 5000000) is a IMX [ 5.145365] printk: console [ttymxc1] enabled [ 5.153211] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 76, base_baud = 5000000) is a IMX [ 5.165088] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 77, base_baud = 5000000) is a IMX [ 5.176932] 21f4000.serial: ttymxc4 at MMIO 0x21f4000 (irq = 78, base_baud = 5000000) is a IMX [ 5.219068] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops) [ 5.225697] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops) [ 5.231384] etnaviv-gpu 130000.gpu: model: GC880, revision: 5106 [ 5.238359] etnaviv-gpu 134000.gpu: model: GC320, revision: 5007 [ 5.247457] [drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor 0 [ 5.264925] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_crtc_ops) [ 5.272917] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_crtc_ops) [ 5.281624] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.31a with HDCP (DWC HDMI 3D TX PHY) [ 5.298318] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops) [ 5.308714] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1 [ 5.318521] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 5.326624] imx-ipuv3 2400000.ipu: IPUv3H probed [ 5.365510] brd: module loaded [ 5.397476] loop: module loaded [ 5.414291] CAN device driver interface [ 5.423749] pps pps0: new PPS source ptp0 [ 5.487509] fec 2188000.ethernet eth0: registered PHC device 0 [ 5.496988] usbcore: registered new interface driver r8152 [ 5.502811] usbcore: registered new interface driver lan78xx [ 5.508736] usbcore: registered new interface driver asix [ 5.514263] usbcore: registered new interface driver ax88179_178a [ 5.520542] usbcore: registered new interface driver cdc_ether [ 5.526544] usbcore: registered new interface driver smsc95xx [ 5.532474] usbcore: registered new interface driver net1080 [ 5.538338] usbcore: registered new interface driver cdc_subset [ 5.544382] usbcore: registered new interface driver zaurus [ 5.550142] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 5.557743] usbcore: registered new interface driver cdc_ncm [ 5.563483] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.570078] ehci-pci: EHCI PCI platform driver [ 5.574658] ehci-mxc: Freescale On-Chip EHCI Host driver [ 5.581125] usbcore: registered new interface driver usb-storage [ 5.607654] snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc0 [ 5.614039] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01T00:00:00 UTC (0) [ 5.623679] i2c /dev entries driver [ 5.642040] Bluetooth: HCI UART driver ver 2.3 [ 5.646519] Bluetooth: HCI UART protocol H4 registered [ 5.651847] Bluetooth: HCI UART protocol LL registered [ 5.660252] sdhci: Secure Digital Host Controller Interface driver [ 5.666458] sdhci: Copyright(c) Pierre Ossman [ 5.670907] sdhci-pltfm: SDHCI platform and OF driver helper [ 5.680250] sdhci-esdhc-imx 2194000.mmc: Got CD GPIO [ 5.685456] sdhci-esdhc-imx 2194000.mmc: Got WP GPIO [ 5.696155] sdhci-esdhc-imx 2198000.mmc: Got CD GPIO [ 5.708989] sdhci-esdhc-imx 2198000.mmc: Got WP GPIO [ 5.716324] caam 2100000.crypto: Entropy delay = 3200 [ 5.782294] caam 2100000.crypto: Instantiated RNG4 SH0 [ 5.843049] caam 2100000.crypto: Instantiated RNG4 SH1 [ 5.851406] caam 2100000.crypto: device ID = 0x0a16010000000100 (Era 4) [ 5.858170] caam 2100000.crypto: job rings = 2, qi = 0 [ 5.876531] mmc3: SDHCI controller on 219c000.mmc [219c000.mmc] using ADMA [ 5.890860] mmc1: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA [ 5.900112] mmc2: SDHCI controller on 2198000.mmc [2198000.mmc] using ADMA [ 5.928651] caam algorithms registered in /proc/crypto [ 5.940590] caam 2100000.crypto: registering rng-caam [ 5.951945] usbcore: registered new interface driver usbhid [ 5.957548] usbhid: USB HID core driver [ 5.967300] ipu1_csi0: Registered ipu1_csi0 capture as /dev/video0 [ 5.975764] ipu1_ic_prpenc: Registered ipu1_ic_prpenc capture as /dev/video1 [ 5.984633] ipu1_ic_prpvf: Registered ipu1_ic_prpvf capture as /dev/video2 [ 5.993490] ipu1_csi1: Registered ipu1_csi1 capture as /dev/video3 [ 6.001356] mmc3: new DDR MMC card at address 0001 [ 6.021268] mmcblk3: mmc3:0001 MMC04G 3.58 GiB [ 6.026697] mmcblk3boot0: mmc3:0001 MMC04G partition 1 2.00 MiB [ 6.040955] mmcblk3boot1: mmc3:0001 MMC04G partition 2 2.00 MiB [ 6.048510] mmcblk3rpmb: mmc3:0001 MMC04G partition 3 128 KiB, chardev (243:0) [ 6.062934] sgtl5000 0-000a: sgtl5000 revision 0x11 [ 6.080969] sgtl5000 0-000a: Using internal LDO instead of VDDD: check ER1 erratum [ 6.129328] random: crng init done [ 6.145194] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 6.204512] NET: Registered protocol family 10 [ 6.213615] Segment Routing with IPv6 [ 6.217435] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 6.225778] NET: Registered protocol family 17 [ 6.230372] can: controller area network core [ 6.234995] NET: Registered protocol family 29 [ 6.239580] can: raw protocol [ 6.242803] can: broadcast manager protocol [ 6.247050] can: netlink gateway - max_hops=1 [ 6.252121] Key type dns_resolver registered [ 6.267123] Registering SWP/SWPB emulation handler [ 6.275365] Loading compiled-in X.509 certificates [ 6.412531] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 6.418084] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 6.448181] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 6.455443] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.463995] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.471302] usb usb1: Product: EHCI Host Controller [ 6.476209] usb usb1: Manufacturer: Linux 5.10.191-cip38 ehci_hcd [ 6.482402] usb usb1: SerialNumber: ci_hdrc.1 [ 6.491958] hub 1-0:1.0: USB hub found [ 6.496167] hub 1-0:1.0: 1 port detected [ 6.516786] imx-media: Registered ipu_ic_pp csc/scaler as /dev/video4 [ 6.527980] imx_thermal 20c8000.anatop:tempmon: Commercial CPU temperature grade - max:95C critical:90C passive:85C [ 6.545867] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 6.601918] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 6.610583] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 6.619415] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db [ 6.627295] ALSA device list: [ 6.630391] #0: imx6-riotboard-sgtl5000 [ 6.639012] Freeing unused kernel memory: 1024K [ 6.669809] Run /init as init process [ 6.798363] usb 1-1: new high-speed USB device number 2 using ci_hdrc Starting syslogd: OK Starting klogd: OK Running sysctl: [ 7.009980] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.00 [ 7.018498] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 7.025706] usb 1-1: Product: USB 2.0 Hub [MTT] OK Populating /dev using udev: [ 7.059627] hub 1-1:1.0: USB hub found [ 7.068633] hub 1-1:1.0: 4 ports detected [ 7.091534] udevd[180]: starting version 3.2.9 [ 7.110520] udevd[180]: specified user 'tss' unknown [ 7.115754] udevd[180]: specified group 'tss' unknown [ 7.140423] udevd[181]: starting eudev-3.2.9 [ 8.588787] coda 2040000.vpu: Direct firmware load for vpu_fw_imx6d.bin failed with error -2 [ 8.597260] coda 2040000.vpu: Falling back to sysfs fallback for: vpu_fw_imx6d.bin done Saving random seed: OK Starting network: OK Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-998653/environment . /lava-998653/environment / # /lava-998653/bin/lava-test-runner /lava-998653/0 /lava-998653/bin/lava-test-runner /lava-998653/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-998653/0/tests/0_dmesg + cat uuid + UUID=998653_1.5.2.3.1[ 10.712732] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 10.809227] [ 10.893287] [ 10.977604] + set +x [ 10.988992] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-998653/environment / # . /lava-998653/environment/lava-998653/bin/lava-test-runner /lava-998653/1 / # /lava-998653/bin/lava-test-runner /lava-998653/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-998653/1/tests/1_bootrr + cat uuid + UUID=998653_1.5.2.3.5[ 11.571127] + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-998653/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-998653/1/../bin/lava-test-case [ 11.685415] /lava-998653/1/../bin/lava-test-case [ 11.765729] /lava-998653/1/../bin/lava-test-case [ 11.811918] + set +x [ 11.844848] / #