connecting to NetworkSerialPort(target=Target(name='imx6qp-wandboard-revd1-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4009, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4009 connected to 10.8.254.5 (port 4009) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2020.05.0-00156-g60b1a02e5a-dirty #28 Sat Jun 27 00:22:32 CEST 2020 Board: Technexion EDM1-CF-IMX6 Quad Plus with PMIC and fairy baseboard detected i.MX6 Quad Plus revision 2.0 i.MX reset reason POR (SRSR: 0x00000001) i.MX6 Quad Plus unique ID: e1fdfca7020b09d4 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2190000.usdhc@2190000.of: registered as mmc0 imx-esdhc 2194000.usdhc@2194000.of: registered as mmc1 imx-esdhc 2198000.usdhc@2198000.of: registered as mmc2 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-ipuv3 2800000.ipu@2800000.of: IPUv3H probed imx-ldb ldb.of: Neither display timings in ldb node nor remote panel found netconsole: registered as netconsole-1 malloc space: 0x4fe7a7c0 -> 0x8fcf4f7f (size 1022.5 MiB) [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/1000979/tftp-deploy-hauld9yi/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/1000979/tftp-deploy-hauld9yi/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/1000979/tftp-deploy-hauld9yi/kernel/zImage [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/1000979/tftp-deploy-hauld9yi/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/1000979/tftp-deploy-hauld9yi/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/1000979/tftp-deploy-hauld9yi/kernel/zImage eth0: 1000Mbps full duplex link detected [33mWARNING:[0m eth0: No MAC address set. Using random address ae:81:69:1d:29:dd T eth0: DHCP client bound to address 10.8.254.188 Loading ARM Linux zImage '/mnt/tftp/1000979/tftp-deploy-hauld9yi/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x12e46000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/1000979/tftp-deploy-hauld9yi/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x18f5668b Loading devicetree from '/mnt/tftp/1000979/tftp-deploy-hauld9yi/dtb/imx6qp-wandboard-revd1.dtb' commandline: console=ttymxc0,115200n8 Starting kernel at 0x12e46000, initrd at 0x18000000, oftree at 0x18f57000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.194-cip39 (KernelCI@build-j50784-arm-gcc-10-multi-v7-defconfig-dtdn7) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Tue Sep 19 14:15:41 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wandboard i.MX6 QuadPlus Board revD1 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x8b800000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000010000000-0x000000003fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000040000000-0x000000008fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000010000000-0x000000008fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000008fffffff] [ 0.000000] percpu: Embedded 20 pages/cpu s49868 r8192 d23860 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752 [ 0.000000] Kernel command line: console=ttymxc0,115200n8 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1971988K/2097152K available (14336K kernel code, 2239K rwdata, 5360K rodata, 2048K init, 424K bss, 59628K reserved, 65536K cma-reserved, 1244144K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76470001 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000008] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000026] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.003887] Console: colour dummy device 80x30 [ 0.003940] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.003956] CPU: Testing write buffer coherency: ok [ 0.003999] CPU0: Spectre v2: using BPIALL workaround [ 0.004010] pid_max: default: 32768 minimum: 301 [ 0.004191] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.004216] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.005149] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.005900] Setting up static identity map for 0x10300000 - 0x103000ac [ 0.007582] rcu: Hierarchical SRCU implementation. [ 0.011236] EFI services will not be available. [ 0.011564] smp: Bringing up secondary CPUs ... [ 0.012412] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.012420] CPU1: Spectre v2: using BPIALL workaround [ 0.013384] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.013395] CPU2: Spectre v2: using BPIALL workaround [ 0.014335] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.014343] CPU3: Spectre v2: using BPIALL workaround [ 0.014472] smp: Brought up 1 node, 4 CPUs [ 0.014486] SMP: Total of 4 processors activated (24.00 BogoMIPS). [ 0.014497] CPU: All CPU(s) started in SVC mode. [ 0.015138] devtmpfs: initialized [ 0.022159] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.022403] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.022431] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.025665] pinctrl core: initialized pinctrl subsystem [ 0.027534] DMI not present or invalid. [ 0.028376] NET: Registered protocol family 16 [ 0.031586] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.033995] thermal_sys: Registered thermal governor 'step_wise' [ 0.034178] cpuidle: using governor menu [ 0.034336] CPU identified as i.MX6QP, silicon rev 1.0 [ 0.175118] vdd1p1: supplied by regulator-dummy [ 0.182063] vdd3p0: supplied by regulator-dummy [ 0.188908] vdd2p5: supplied by regulator-dummy [ 0.195849] vddarm: supplied by regulator-dummy [ 0.202939] vddpu: supplied by regulator-dummy [ 0.209712] vddsoc: supplied by regulator-dummy [ 0.556602] No ATAGs? [ 0.556760] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.556771] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.560936] imx6q-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver [ 0.566908] Serial: AMBA PL011 UART driver [ 0.596989] imx6q-pinctrl 20e0000.pinctrl: pin MX6Q_PAD_EIM_D22 already requested by 20e0000.pinctrl; cannot claim for regulator-usbotgvbus [ 0.597009] imx6q-pinctrl 20e0000.pinctrl: pin-42 (regulator-usbotgvbus) status -22 [ 0.597026] imx6q-pinctrl 20e0000.pinctrl: could not request pin 42 (MX6Q_PAD_EIM_D22) from group usbotgvbusgrp on device 20e0000.pinctrl [ 0.597039] reg-fixed-voltage regulator-usbotgvbus: Error applying setting, reverse things back [ 0.597060] reg-fixed-voltage: probe of regulator-usbotgvbus failed with error -22 [ 0.600433] iommu: Default domain type: Translated [ 0.600715] vgaarb: loaded [ 0.601573] SCSI subsystem initialized [ 0.602072] usbcore: registered new interface driver usbfs [ 0.602127] usbcore: registered new interface driver hub [ 0.602177] usbcore: registered new device driver usb [ 0.603372] i2c i2c-0: IMX I2C adapter registered [ 0.605025] i2c i2c-1: IMX I2C adapter registered [ 0.606269] i2c i2c-2: IMX I2C adapter registered [ 0.607625] pps_core: LinuxPPS API ver. 1 registered [ 0.607637] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.607659] PTP clock support registered [ 0.611627] clocksource: Switched to clocksource mxc_timer1 [ 1.760471] NET: Registered protocol family 2 [ 1.760849] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.762076] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 1.762121] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.762207] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.762352] TCP: Hash tables configured (established 8192 bind 8192) [ 1.762534] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.762578] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.762760] NET: Registered protocol family 1 [ 1.763399] RPC: Registered named UNIX socket transport module. [ 1.763414] RPC: Registered udp transport module. [ 1.763423] RPC: Registered tcp transport module. [ 1.763431] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.763448] PCI: CLS 0 bytes, default 64 [ 1.763979] Trying to unpack rootfs image as initramfs... [ 3.125933] Freeing initrd memory: 15708K [ 3.126434] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 3.126857] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 3.128717] Initialise system trusted keyrings [ 3.129068] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 3.135125] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 3.135888] NFS: Registering the id_resolver key type [ 3.135933] Key type id_resolver registered [ 3.135943] Key type id_legacy registered [ 3.136047] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 3.136060] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 3.136099] ntfs: driver 2.1.32 [Flags: R/O]. [ 3.136576] Key type asymmetric registered [ 3.136591] Asymmetric key parser 'x509' registered [ 3.136647] bounce: pool size: 64 pages [ 3.136693] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 3.136708] io scheduler mq-deadline registered [ 3.136720] io scheduler kyber registered [ 3.174603] mxs-dma 110000.dma-apbh: initialized [ 3.179509] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 3.179530] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 3.243183] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled [ 3.247699] SuperH (H)SCI(F) driver initialized [ 3.248659] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 33, base_baud = 5000000) is a IMX [ 4.083808] printk: console [ttymxc0] enabled [ 4.089246] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 77, base_baud = 5000000) is a IMX [ 4.099386] msm_serial: driver initialized [ 4.103789] STMicroelectronics ASC driver initialized [ 4.110774] STM32 USART driver initialized [ 4.133321] brd: module loaded [ 4.143773] loop: module loaded [ 4.150870] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024 [ 4.158837] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480 [ 4.166879] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000 [ 4.175087] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 [ 4.182842] ahci-imx 2200000.sata: supply ahci not found, using dummy regulator [ 4.190322] ahci-imx 2200000.sata: supply phy not found, using dummy regulator [ 4.197626] ahci-imx 2200000.sata: supply target not found, using dummy regulator [ 4.207949] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled [ 4.214968] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 4.223783] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 4.234256] scsi host0: ahci-imx [ 4.237872] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 84 [ 4.258117] CAN device driver interface [ 4.263275] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 4.272579] pps pps0: new PPS source ptp0 [ 4.308046] fec 2188000.ethernet eth0: registered PHC device 0 [ 4.315503] e1000e: Intel(R) PRO/1000 Network Driver [ 4.320476] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 4.326491] igb: Intel(R) Gigabit Ethernet Network Driver [ 4.331916] igb: Copyright (c) 2007-2014 Intel Corporation. [ 4.343510] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 4.350953] usbcore: registered new interface driver pegasus [ 4.356699] usbcore: registered new interface driver asix [ 4.362155] usbcore: registered new interface driver ax88179_178a [ 4.368291] usbcore: registered new interface driver cdc_ether [ 4.374193] usbcore: registered new interface driver smsc75xx [ 4.379987] usbcore: registered new interface driver smsc95xx [ 4.385792] usbcore: registered new interface driver net1080 [ 4.391507] usbcore: registered new interface driver cdc_subset [ 4.397483] usbcore: registered new interface driver zaurus [ 4.403151] usbcore: registered new interface driver cdc_ncm [ 4.412328] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.418864] ehci-pci: EHCI PCI platform driver [ 4.423376] ehci-platform: EHCI generic platform driver [ 4.428894] ehci-orion: EHCI orion driver [ 4.433162] SPEAr-ehci: EHCI SPEAr driver [ 4.437359] ehci-st: EHCI STMicroelectronics driver [ 4.442449] ehci-exynos: EHCI Exynos driver [ 4.446810] ehci-atmel: EHCI Atmel driver [ 4.450995] tegra-ehci: Tegra EHCI driver [ 4.455234] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.461435] ohci-pci: OHCI PCI platform driver [ 4.465945] ohci-platform: OHCI generic platform driver [ 4.471429] SPEAr-ohci: OHCI SPEAr driver [ 4.475656] ohci-st: OHCI STMicroelectronics driver [ 4.480727] ohci-atmel: OHCI Atmel driver [ 4.485986] usbcore: registered new interface driver usb-storage [ 4.500184] i2c /dev entries driver [ 4.523670] sdhci: Secure Digital Host Controller Interface driver [ 4.529861] sdhci: Copyright(c) Pierre Ossman [ 4.536950] Synopsys Designware Multimedia Card Interface Driver [ 4.544907] sdhci-pltfm: SDHCI platform and OF driver helper [ 4.551918] sdhci-esdhc-imx 2190000.mmc: Got CD GPIO [ 4.552998] sdhci-esdhc-imx 2198000.mmc: Got CD GPIO [ 4.562037] ledtrig-cpu: registered to indicate activity on CPUs [ 4.569172] usbcore: registered new interface driver usbhid [ 4.574787] usbhid: USB HID core driver [ 4.582426] ata1: SATA link down (SStatus 0 SControl 300) [ 4.585353] NET: Registered protocol family 10 [ 4.587881] ahci-imx 2200000.sata: no device found, disabling link. [ 4.592903] mmc1: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA [ 4.598606] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug [ 4.606190] mmc2: SDHCI controller on 2198000.mmc [2198000.mmc] using ADMA [ 4.606639] Segment Routing with IPv6 [ 4.606719] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 4.606727] mmc0: SDHCI controller on 2190000.mmc [2190000.mmc] using ADMA [ 4.607457] NET: Registered protocol family 17 [ 4.607474] can: controller area network core [ 4.607547] NET: Registered protocol family 29 [ 4.607553] can: raw protocol [ 4.607562] can: broadcast manager protocol [ 4.607573] can: netlink gateway - max_hops=1 [ 4.608060] Key type dns_resolver registered [ 4.614677] ThumbEE CPU extension supported. [ 4.639375] mmc0: host does not support reading read-only switch, assuming write-enable [ 4.640513] Registering SWP/SWPB emulation handler [ 4.647102] mmc0: new high speed SDHC card at address 1234 [ 4.652508] Loading compiled-in X.509 certificates [ 4.658318] mmcblk0: mmc0:1234 SA04G 3.64 GiB [ 4.688993] imx_usb 2184200.usb: No over current polarity defined [ 4.706933] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 4.711868] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 4.737830] mmc2: new DDR MMC card at address 0001 [ 4.741503] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 4.744400] mmcblk2: mmc2:0001 S10004 3.56 GiB [ 4.749552] hub 1-0:1.0: USB hub found [ 4.753728] mmcblk2boot0: mmc2:0001 S10004 partition 1 4.00 MiB [ 4.756580] hub 1-0:1.0: 1 port detected [ 4.763430] mmcblk2boot1: mmc2:0001 S10004 partition 2 4.00 MiB [ 4.772530] mmcblk2rpmb: mmc2:0001 S10004 partition 3 4.00 MiB, chardev (235:0) [ 4.772603] imx_thermal 20c8000.anatop:tempmon: Automotive CPU temperature grade - max:125C critical:120C passive:115C [ 4.781522] mmcblk2: p1 p2 [ 4.803560] Freeing unused kernel memory: 2048K [ 4.832569] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: [ 4.971062] udevd[123]: starting version 3.2.9 [ 4.977282] random: udevd: uninitialized urandom read (16 bytes read) [ 4.984261] random: udevd: uninitialized urandom read (16 bytes read) [ 4.990830] random: udevd: uninitialized urandom read (16 bytes read) [ 5.005377] udevd[123]: specified user 'tss' unknown [ 5.010466] udevd[123]: specified group 'tss' unknown [ 5.017744] udevd[124]: starting eudev-3.2.9 [ 5.051538] usb 1-1: new high-speed USB device number 2 using ci_hdrc [ 5.264725] hub 1-1:1.0: USB hub found [ 5.269443] hub 1-1:1.0: 4 ports detected [ 5.439890] imx-ipuv3 2400000.ipu: IPUv3H probed [ 5.483776] imx-ipuv3 2800000.ipu: IPUv3H probed [ 5.486880] usb_phy_generic usbphynop1: supply vcc not found, using dummy regulator [ 5.496334] usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests [ 5.504750] usb_phy_generic usbphynop2: supply vcc not found, using dummy regulator [ 5.512623] usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests [ 5.582472] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops [etnaviv]) [ 5.591709] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops [etnaviv]) [ 5.611638] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops [etnaviv]) [ 5.618213] etnaviv-gpu 130000.gpu: model: GC3000, revision: 5450 [ 5.681961] etnaviv-gpu 134000.gpu: model: GC320, revision: 5303 [ 5.691286] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1216 [ 5.697490] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 [ 5.759799] [drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor 0 [ 5.842337] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops imx_drm_exit [imxdrm]) [ 5.850691] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops imx_drm_exit [imxdrm]) [ 5.859167] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops imx_drm_exit [imxdrm]) [ 5.866139] caam 2100000.crypto: Entropy delay = 3200 [ 5.867545] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops imx_drm_exit [imxdrm]) [ 5.880806] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with HDCP (DWC HDMI 3D TX PHY) [ 5.896318] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops [dw_hdmi_imx]) [ 5.912601] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1 [ 5.920593] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 5.933231] caam 2100000.crypto: Instantiated RNG4 SH0 [ 5.951832] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 5.993993] caam 2100000.crypto: Instantiated RNG4 SH1 [ 5.999162] caam 2100000.crypto: device ID = 0x0a16010000000000 (Era 4) [ 6.005894] caam 2100000.crypto: job rings = 2, qi = 0 [ 6.106383] sgtl5000 1-000a: sgtl5000 revision 0x11 [ 6.119880] sgtl5000 1-000a: Using internal LDO instead of VDDD: check ER1 erratum [ 6.361682] caam algorithms registered in /proc/crypto [ 6.368333] caam 2100000.crypto: registering rng-caam done Saving random seed: [ 6.462734] random: dd: uninitialized urandom read (32 bytes read) OK Starting network: OK [ 6.556132] random: crng init done [ 6.559618] random: 1 urandom warning(s) missed due to ratelimiting Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-1000979/environment . /lava-1000979/environment / # /lava-1000979/bin/lava-test-runner /lava-1000979/0 /lava-1000979/bin/lava-test-runner /lava-1000979/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-1000979/0/tests/0_dmesg + cat uuid + UUID=1000979_1.5.2.3[ 7.156459] .1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 7.203720] [ 7.245640] [ 7.287316] + set[ 7.297261] +x / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-1000979/environment / # . /lava-1000979/environment/lava-1000979/bin/lava-test-runner /lava-1000979/1 / # /lava-1000979/bin/lava-test-runner /lava-1000979/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-1000979/1/tests/1_bootrr + cat uuid [ 7.787662] + UUID=1000979_1.5.2.3.5 + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-1000979/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto 2184000.usb /lava-1000979/1/../bin/lava-test-case [ 8.870696] /lava-1000979/1/../bin/lava-test-case [ 8.912455] /lava-1000979/1/../bin/lava-test-case [ 8.938340] + set[ 8.957700] +x / #