[Enter `^Ec?' for help] U-Boot 2015.01-rc3-00172-gd0a58bc (Dec 28 2014 - 23:49:42) for ODROID-XU3 CPU: Exynos5800@800MHz Board: Odroid XU3 based on EXYNOS5422 I2C: ready DRAM: 1.8 GiB trace: copying 000a7308 bytes of early data from 50000000 to aeff0000 trace: enabled MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 2  0 ODROID-XU3 # usb start usb start (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found ODROID-XU3 # setenv autoload no setenv autoload no ODROID-XU3 # dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 EHCI timed out on TD - token=0x8008d80 BOOTP broadcast 2 DHCP client bound to address 192.168.201.15 (5012 ms) ODROID-XU3 # setenv serverip 192.168.201.1 setenv serverip 192.168.201.1 ODROID-XU3 # tftp 0x42000000 11982352/tftp-deploy-stea63l2/kernel/zImage tftp 0x42000000 11982352/tftp-deploy-stea63l2/kernel/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.201.1; our IP address is 192.168.201.15 Filename '11982352/tftp-deploy-stea63l2/kernel/zImage'. Load address: 0x42000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 494.1 KiB/s done Bytes transferred = 7443944 (7195e8 hex) ODROID-XU3 # tftp 0x43300000 11982352/tftp-deploy-stea63l2/ramdisk/ramdisk.cpio.gz.uboot tftp 0x43300000 11982352/tftp-deploy-stea63l2/ramdisk/ramdisk.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.201.1; our IP address is 192.168.201.15 Filename '11982352/tftp-deploy-stea63l2/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x43300000 Loading: *EHCI timed out on TD - token=0x88008d80 T ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ########################################################### 706.1 KiB/s done Bytes transferred = 10396161 (9ea201 hex) ODROID-XU3 # setenv initrd_size ${filesize} setenv initrd_size ${filesize} ODROID-XU3 # tftp 0x43000000 11982352/tftp-deploy-stea63l2/dtb/exynos5422-odroidxu3.dtb tftp 0x43000000 11982352/tftp-deploy-stea63l2/dtb/exynos5422-odroidxu3.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.201.1; our IP address is 192.168.201.15 Filename '11982352/tftp-deploy-stea63l2/dtb/exynos5422-odroidxu3.dtb'. Load address: 0x43000000 Loading: *EHCI timed out on TD - token=0x88008d80 T ##### 11.7 KiB/s done Bytes transferred = 65532 (fffc hex) ODROID-XU3 # setenv bootargs 'console=ttySAC2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=:::::eth0:dhcp' setenv bootargs 'console=ttySAC2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=:::::eth0:dhcp' ODROID-XU3 # bootz 0x42000000 0x43300000 0x43000000 bootz 0x42000000 0x43300000 0x43000000 Kernel image @ 0x42000000 [ 0x000000 - 0x7195e8 ] ## Loading init Ramdisk from Legacy Image at 43300000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 10396097 Bytes = 9.9 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 Loading Ramdisk to 4f615000, end 4ffff1c1 ... OK Loading Device Tree to 4f602000, end 4f614ffb ... OK Starting kernel ...(fake run for tracing) Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 5.10.200-cip40 (KernelCI@build-j11833-arm-gcc-10-exynos-defconfig-rbb4k) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP PREEMPT Fri Nov 10 05:39:50 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Hardkernel Odroid XU3 [ 0.000000] earlycon: exynos4210 at MMIO 0x12c20000 (options '115200n8') [ 0.000000] printk: bootconsole [exynos4210] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 96 MiB at 0xaa000000 [ 0.000000] Samsung CPU ID: 0xe5422001 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000040000000-0x000000006fffffff] [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000afffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000afffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000afffffff] [ 0.000000] Running under secure firmware. [ 0.000000] percpu: Embedded 20 pages/cpu s52332 r8192 d21396 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 457216 [ 0.000000] Kernel command line: console=ttySAC2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=:::::eth0:dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 1685120K/1835008K available (11264K kernel code, 1393K rwdata, 3952K rodata, 1024K init, 6533K bss, 51584K reserved, 98304K cma-reserved, 950272K highmem) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 <6>[ 0.000000] Running RCU self tests <6>[ 0.000000] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU lockdep checking is enabled. <6>[ 0.000000] Trampoline variant of Tasks RCU enabled. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] GIC: Using split EOI/Deactivate mode <6>[ 0.000000] Switching to timer-based delay loop, resolution 41ns <6>[ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns <6>[ 0.000011] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns <4>[ 0.008108] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 <6>[ 0.017435] arch_timer: cp15 timer(s) running at 24.00MHz (phys). <6>[ 0.022340] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns <6>[ 0.033347] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns <6>[ 0.041571] Ignoring duplicate/late registration of read_current_timer delay <6>[ 0.050221] Console: colour dummy device 80x30 <4>[ 0.053533] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <4>[ 0.061546] ... MAX_LOCKDEP_SUBCLASSES: 8 <4>[ 0.065867] ... MAX_LOCK_DEPTH: 48 <4>[ 0.070250] ... MAX_LOCKDEP_KEYS: 8192 <4>[ 0.074843] ... CLASSHASH_SIZE: 4096 <4>[ 0.079471] ... MAX_LOCKDEP_ENTRIES: 32768 <4>[ 0.084114] ... MAX_LOCKDEP_CHAINS: 65536 <4>[ 0.088828] ... CHAINHASH_SIZE: 32768 <4>[ 0.093473] memory used by lock dependency info: 4061 kB <4>[ 0.099140] memory used for stack traces: 2112 kB <4>[ 0.104132] per task-struct memory footprint: 1536 bytes <6>[ 0.109885] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) <6>[ 0.120378] CPU: Testing write buffer coherency: ok <6>[ 0.125455] pid_max: default: 32768 minimum: 301 <6>[ 0.130832] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.137903] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.151937] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100 <6>[ 0.160091] Setting up static identity map for 0x40100000 - 0x40100060 <6>[ 0.166591] ARM CCI driver probed <6>[ 0.169647] Exynos MCPM support installed <6>[ 0.174175] rcu: Hierarchical SRCU implementation. <6>[ 0.181514] soc soc0: Exynos: CPU[EXYNOS5800] PRO_ID[0xe5422001] REV[0x1] Detected <6>[ 0.190543] smp: Bringing up secondary CPUs ... <6>[ 0.197315] CPU1: thread -1, cpu 1, socket 1, mpidr 80000101 <6>[ 0.201496] CPU2: thread -1, cpu 2, socket 1, mpidr 80000102 <6>[ 0.204869] CPU3: thread -1, cpu 3, socket 1, mpidr 80000103 <6>[ 0.208500] CPU4: thread -1, cpu 0, socket 0, mpidr 80000000 <6>[ 0.208514] CPU4: detected I-Cache line size mismatch, workaround enabled <3>[ 0.208527] CPU4: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable <6>[ 0.247381] CPU4: Spectre BHB: enabling loop workaround for all CPUs <6>[ 0.257339] CPU5: thread -1, cpu 1, socket 0, mpidr 80000001 <6>[ 0.257351] CPU5: detected I-Cache line size mismatch, workaround enabled <3>[ 0.257362] CPU5: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable <6>[ 0.281798] CPU6: thread -1, cpu 2, socket 0, mpidr 80000002 <6>[ 0.281809] CPU6: detected I-Cache line size mismatch, workaround enabled <3>[ 0.281821] CPU6: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable <6>[ 0.306295] CPU7: thread -1, cpu 3, socket 0, mpidr 80000003 <6>[ 0.306307] CPU7: detected I-Cache line size mismatch, workaround enabled <3>[ 0.306319] CPU7: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable <6>[ 0.328229] smp: Brought up 1 node, 8 CPUs <6>[ 0.331832] SMP: Total of 8 processors activated (384.00 BogoMIPS). <6>[ 0.338388] CPU: All CPU(s) started in HYP mode. <6>[ 0.343176] CPU: Virtualization extensions available. <6>[ 0.353379] devtmpfs: initialized <6>[ 0.439048] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 <6>[ 0.447895] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.456591] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) <6>[ 0.466151] pinctrl core: initialized pinctrl subsystem <6>[ 0.477819] NET: Registered protocol family 16 <6>[ 0.485247] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.499629] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.507187] cpuidle: using governor menu <6>[ 0.517012] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. <6>[ 0.524438] hw-breakpoint: maximum watchpoint size is 8 bytes. <6>[ 0.935353] EXYNOS5420 PMU initialized <6>[ 1.059773] iommu: Default domain type: Translated <5>[ 1.065415] SCSI subsystem initialized <6>[ 1.068903] usbcore: registered new interface driver usbfs <6>[ 1.073901] usbcore: registered new interface driver hub <6>[ 1.079387] usbcore: registered new device driver usb <6>[ 1.086429] s3c-i2c 12c60000.i2c: slave address 0x00 <6>[ 1.090194] s3c-i2c 12c60000.i2c: bus frequency set to 65 KHz <6>[ 1.113613] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter <6>[ 1.119011] s3c-i2c 12c80000.i2c: slave address 0x00 <6>[ 1.122973] s3c-i2c 12c80000.i2c: bus frequency set to 65 KHz <6>[ 1.129567] s3c-i2c 12c80000.i2c: i2c-2: S3C I2C adapter <6>[ 1.138513] Advanced Linux Sound Architecture Driver Initialized. <6>[ 1.145752] nfc: nfc_init: NFC Core ver 0.1 <6>[ 1.149027] NET: Registered protocol family 39 <6>[ 1.154669] clocksource: Switched to clocksource mct-frc <6>[ 2.332653] NET: Registered protocol family 2 <6>[ 2.336278] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 2.346138] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 22528 bytes, linear) <6>[ 2.353795] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 2.361577] TCP bind hash table entries: 8192 (order: 6, 327680 bytes, linear) <6>[ 2.370664] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 2.376508] UDP hash table entries: 512 (order: 3, 49152 bytes, linear) <6>[ 2.382953] UDP-Lite hash table entries: 512 (order: 3, 49152 bytes, linear) <6>[ 2.390731] NET: Registered protocol family 1 <6>[ 2.397019] RPC: Registered named UNIX socket transport module. <6>[ 2.401793] RPC: Registered udp transport module. <6>[ 2.406796] RPC: Registered tcp transport module. <6>[ 2.411664] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 2.419401] Trying to unpack rootfs image as initramfs... <6>[ 3.365142] Freeing initrd memory: 10156K <6>[ 3.371228] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available <6>[ 3.380139] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available <5>[ 3.394140] Initialise system trusted keyrings <6>[ 3.398304] workingset: timestamp_bits=30 max_order=19 bucket_order=0 <6>[ 3.433943] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 3.441191] NFS: Registering the id_resolver key type <5>[ 3.445306] Key type id_resolver registered <5>[ 3.449470] Key type id_legacy registered <6>[ 3.454097] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 3.460852] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <6>[ 3.468452] romfs: ROMFS MTD (C) 2007 Red Hat, Inc. <5>[ 3.474909] Key type asymmetric registered <5>[ 3.477873] Asymmetric key parser 'x509' registered <6>[ 3.483134] bounce: pool size: 64 pages <6>[ 3.487143] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) <6>[ 3.494725] io scheduler mq-deadline registered <6>[ 3.499385] io scheduler kyber registered <4>[ 3.510091] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator <4>[ 3.520741] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator <4>[ 3.528328] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator <4>[ 3.538517] exynos5_usb3drd_phy 12500000.phy: supply vbus not found, using dummy regulator <4>[ 3.546128] exynos5_usb3drd_phy 12500000.phy: supply vbus-boost not found, using dummy regulator <6>[ 3.579629] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-241330 <6>[ 3.585186] dma-pl330 121a0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 <6>[ 3.603381] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-241330 <6>[ 3.608942] dma-pl330 121b0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 <6>[ 3.620918] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-241330 <6>[ 3.626477] dma-pl330 10800000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 <6>[ 3.865233] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled <6>[ 3.879394] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 70, base_baud = 0) is a S3C6400/10 <6>[ 3.890283] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 71, base_baud = 0) is a S3C6400/10 <6>[ 3.900653] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 72, base_baud = 0) is a S3C6400/10 <6>[ 3.908904] printk: console [ttySAC2] enabled <6>[ 3.908904] printk: console [ttySAC2] enabled <6>[ 3.917572] printk: bootconsole [exynos4210] disabled <6>[ 3.917572] printk: bootconsole [exynos4210] disabled <6>[ 3.930843] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 73, base_baud = 0) is a S3C6400/10 <6>[ 3.943235] exynos-trng 10830600.rng: Exynos True Random Number Generator. <6>[ 3.952910] exynos-mixer 14450000.mixer: Adding to iommu group 0 <6>[ 3.978456] panfrost 11800000.gpu: clock rate = 400000000 <3>[ 3.983352] panfrost 11800000.gpu: [drm:panfrost_devfreq_init] *ERROR* Couldn't set OPP regulators <6>[ 4.026274] brd: module loaded <6>[ 4.069286] loop: module loaded <4>[ 4.071232] the cryptoloop driver has been deprecated and will be removed in in Linux 5.16 <6>[ 4.088141] usbcore: registered new interface driver r8152 <6>[ 4.092563] usbcore: registered new interface driver asix <6>[ 4.098231] usbcore: registered new interface driver ax88179_178a <6>[ 4.104479] usbcore: registered new interface driver cdc_ether <6>[ 4.110640] usbcore: registered new interface driver smsc75xx <6>[ 4.116624] usbcore: registered new interface driver smsc95xx <6>[ 4.122504] usbcore: registered new interface driver net1080 <6>[ 4.128448] usbcore: registered new interface driver cdc_subset <6>[ 4.134611] usbcore: registered new interface driver zaurus <6>[ 4.140430] usbcore: registered new interface driver cdc_ncm <6>[ 4.150548] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>[ 4.155971] ehci-exynos: EHCI Exynos driver <6>[ 4.161793] exynos-ehci 12110000.usb: EHCI Host Controller <6>[ 4.166559] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 <6>[ 4.174737] exynos-ehci 12110000.usb: irq 92, io mem 0x12110000 <6>[ 4.204674] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 <6>[ 4.210747] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 <6>[ 4.218054] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 4.225475] usb usb1: Product: EHCI Host Controller <6>[ 4.230534] usb usb1: Manufacturer: Linux 5.10.200-cip40 ehci_hcd <6>[ 4.236911] usb usb1: SerialNumber: 12110000.usb <6>[ 4.245430] hub 1-0:1.0: USB hub found <6>[ 4.248185] hub 1-0:1.0: 3 ports detected <6>[ 4.257332] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver <6>[ 4.262358] ohci-exynos: OHCI Exynos driver <6>[ 4.267584] exynos-ohci 12120000.usb: USB Host Controller <6>[ 4.272412] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 <6>[ 4.280634] exynos-ohci 12120000.usb: irq 92, io mem 0x12120000 <6>[ 4.359286] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10 <6>[ 4.366413] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 4.373791] usb usb2: Product: USB Host Controller <6>[ 4.378871] usb usb2: Manufacturer: Linux 5.10.200-cip40 ohci_hcd <6>[ 4.385196] usb usb2: SerialNumber: 12120000.usb <6>[ 4.391895] hub 2-0:1.0: USB hub found <6>[ 4.396016] hub 2-0:1.0: 3 ports detected <6>[ 4.404110] usbcore: registered new interface driver uas <6>[ 4.408473] usbcore: registered new interface driver usb-storage <6>[ 4.416497] udc-core: couldn't find an available UDC - added [g_ether] to list of pending drivers <6>[ 4.430538] i2c /dev entries driver <6>[ 4.485726] vdd_ldo9: Bringing 3300000uV into 3000000-3000000uV <6>[ 4.510048] vddq_mmc2: Bringing 3300000uV into 2800000-2800000uV <6>[ 4.540356] vdd_sd: Bringing 3300000uV into 2800000-2800000uV <6>[ 4.544757] usb 1-1: new high-speed USB device number 2 using exynos-ehci <6>[ 4.672837] s5m-rtc s2mps14-rtc: registered as rtc0 <6>[ 4.678823] s5m-rtc s2mps14-rtc: setting system clock to 2000-01-01T00:01:12 UTC (946684872) <4>[ 4.688137] s2mps11-clk s2mps11-clk: DMA mask not set <6>[ 4.710072] ina2xx 0-0040: power monitor ina231 (Rshunt = 10000 uOhm) <6>[ 4.717901] ina2xx 0-0041: power monitor ina231 (Rshunt = 10000 uOhm) <6>[ 4.725534] ina2xx 0-0044: power monitor ina231 (Rshunt = 10000 uOhm) <6>[ 4.733147] ina2xx 0-0045: power monitor ina231 (Rshunt = 10000 uOhm) <6>[ 4.745627] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 <6>[ 4.746187] exynos-tmu 10060000.tmu: More trip points than supported by this TMU. <6>[ 4.752671] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 <6>[ 4.760436] exynos-tmu 10060000.tmu: 2 trip points should be configured in polling mode. <6>[ 4.771351] hub 1-1:1.0: USB hub found <6>[ 4.780367] hub 1-1:1.0: 5 ports detected <6>[ 4.780480] exynos-tmu 10064000.tmu: More trip points than supported by this TMU. <6>[ 4.792066] exynos-tmu 10064000.tmu: 2 trip points should be configured in polling mode. <6>[ 4.803269] exynos-tmu 10068000.tmu: More trip points than supported by this TMU. <6>[ 4.809613] exynos-tmu 10068000.tmu: 2 trip points should be configured in polling mode. <6>[ 4.820731] exynos-tmu 1006c000.tmu: More trip points than supported by this TMU. <6>[ 4.827085] exynos-tmu 1006c000.tmu: 2 trip points should be configured in polling mode. <6>[ 4.838280] exynos-tmu 100a0000.tmu: More trip points than supported by this TMU. <6>[ 4.844635] exynos-tmu 100a0000.tmu: 6 trip points should be configured in polling mode. <6>[ 4.857076] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled <6>[ 4.866739] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com <6>[ 4.895653] cpu cpu0: EM: created perf domain <6>[ 4.926521] cpu cpu4: EM: created perf domain <6>[ 4.940603] sdhci: Secure Digital Host Controller Interface driver <6>[ 4.945719] sdhci: Copyright(c) Pierre Ossman <6>[ 4.951452] Synopsys Designware Multimedia Card Interface Driver <6>[ 4.965476] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. <6>[ 4.965513] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. <6>[ 4.972146] dwmmc_exynos 12200000.mmc: Using internal DMA controller. <6>[ 4.973203] s5p-secss 10830000.sss: s5p-sss driver registered <6>[ 4.974774] usbcore: registered new interface driver usbhid <6>[ 4.974782] usbhid: USB HID core driver <6>[ 4.979345] dwmmc_exynos 12220000.mmc: Using internal DMA controller. <6>[ 4.985342] dwmmc_exynos 12200000.mmc: Version ID is 250a <6>[ 4.986349] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 94,64 bit host data width,64 deep fifo <6>[ 4.991290] dwmmc_exynos 12220000.mmc: Version ID is 250a <6>[ 5.008770] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 95,64 bit host data width,64 deep fifo <6>[ 5.039346] dwmmc_exynos 12200000.mmc: allocated mmc-pwrseq <6>[ 5.051410] exynos-nocp: new NoC Probe device registered: 10ca1000.nocp <6>[ 5.057228] exynos-nocp: new NoC Probe device registered: 10ca1400.nocp <6>[ 5.064017] exynos-nocp: new NoC Probe device registered: 10ca1800.nocp <6>[ 5.065154] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) <6>[ 5.071376] exynos-nocp: new NoC Probe device registered: 10ca1c00.nocp <6>[ 5.084131] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) <6>[ 5.087997] exynos-ppmu: new PPMU device registered 10d00000.ppmu (ppmu-event3-dmc0_0) <6>[ 5.105768] exynos-ppmu: new PPMU device registered 10d10000.ppmu (ppmu-event3-dmc0_1) <6>[ 5.118369] exynos-ppmu: new PPMU device registered 10d60000.ppmu (ppmu-event3-dmc1_0) <6>[ 5.124660] usb 1-1.1: new high-speed USB device number 3 using exynos-ehci <6>[ 5.126391] exynos-ppmu: new PPMU device registered 10d70000.ppmu (ppmu-event3-dmc1_1) <6>[ 5.147941] exynos5-dmc 10c20000.memory-controller: DMC initialized, in irq mode: 0 <6>[ 5.171920] NET: Registered protocol family 10 <6>[ 5.177607] Segment Routing with IPv6 <6>[ 5.180116] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 5.187398] NET: Registered protocol family 17 <6>[ 5.190918] NET: Registered protocol family 15 <5>[ 5.195719] Key type dns_resolver registered <5>[ 5.200562] Registering SWP/SWPB emulation handler <5>[ 5.205791] Loading compiled-in X.509 certificates <6>[ 5.214502] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330 <6>[ 5.219985] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6 <4>[ 5.253523] dma-pl330 3880000.adma: PM domain MAU will not be powered off <6>[ 5.285821] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 <6>[ 5.292976] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 <6>[ 5.305061] smsc95xx v2.0.0 <6>[ 5.389984] exynos-asv 10000000.chipid: cpu0 opp0, freq: 1500 missing <6>[ 5.395473] exynos-asv 10000000.chipid: cpu4 opp0, freq: 2100 missing <3>[ 5.405775] OF: graph: no port node found in /soc/hdmi@14530000 <6>[ 5.407703] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) <6>[ 5.413436] [drm] Exynos DRM: using 14450000.mixer device for DMA mapping operations <6>[ 5.413658] exynos-drm exynos-drm: bound 14450000.mixer (ops mixer_component_ops) <6>[ 5.413890] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_component_ops) <6>[ 5.414789] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes <6>[ 5.415967] exynos-drm exynos-drm: [drm] Cannot find any crtc or sizes <6>[ 5.417143] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 0 <6>[ 5.418646] panfrost 11800000.gpu: clock rate = 400000000 <6>[ 5.420697] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) <6>[ 5.426559] panfrost 11800000.gpu: mali-t620 id 0x620 major 0x0 minor 0x1 status 0x0 <6>[ 5.426580] panfrost 11800000.gpu: features: 00000000,10206400, issues: 00000000,21eee400 <6>[ 5.426596] panfrost 11800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xf JS:0x7 <6>[ 5.426615] panfrost 11800000.gpu: shader_present=0x3f l2_present=0x11 <6>[ 5.430190] [drm] Initialized panfrost 1.1.0 20180908 for 11800000.gpu on minor 1 <6>[ 5.437940] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) <6>[ 5.486571] SMSC LAN8700 usb-001:003:01: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=usb-001:003:01, irq=POLL) <6>[ 5.494132] mmc_host mmc0: Bus speed (slot 0) = 400000000Hz (slot req 200000000Hz, actual 200000000HZ div = 1) <6>[ 5.506953] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-12110000.usb-1.1, smsc95xx USB 2.0 Ethernet, 66:20:a1:b5:a9:56 <6>[ 5.510308] mmc0: new HS400 MMC card at address 0001 <6>[ 5.578954] mmcblk0: mmc0:0001 SDW32G 29.1 GiB <6>[ 5.584369] mmcblk0boot0: mmc0:0001 SDW32G partition 1 4.00 MiB <6>[ 5.591213] mmcblk0boot1: mmc0:0001 SDW32G partition 2 4.00 MiB <6>[ 5.597271] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller <6>[ 5.597853] mmcblk0rpmb: mmc0:0001 SDW32G partition 3 4.00 MiB, chardev (247:0) <6>[ 5.601869] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 3 <6>[ 5.620813] xhci-hcd xhci-hcd.8.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010 <6>[ 5.627519] mmcblk0: p1 p2 <6>[ 5.629560] xhci-hcd xhci-hcd.8.auto: irq 173, io mem 0x12000000 <6>[ 5.639764] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller <6>[ 5.644139] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 4 <6>[ 5.652044] xhci-hcd xhci-hcd.8.auto: Host supports USB 3.0 SuperSpeed <6>[ 5.659609] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 <6>[ 5.667307] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 5.674729] usb usb3: Product: xHCI Host Controller <6>[ 5.679834] usb usb3: Manufacturer: Linux 5.10.200-cip40 xhci-hcd <6>[ 5.686178] usb usb3: SerialNumber: xhci-hcd.8.auto <6>[ 5.693827] hub 3-0:1.0: USB hub found <6>[ 5.696773] hub 3-0:1.0: 1 port detected <6>[ 5.702554] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. <6>[ 5.709859] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 <6>[ 5.717981] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 5.725420] usb usb4: Product: xHCI Host Controller <6>[ 5.730485] usb usb4: Manufacturer: Linux 5.10.200-cip40 xhci-hcd <6>[ 5.736844] usb usb4: SerialNumber: xhci-hcd.8.auto <6>[ 5.743371] hub 4-0:1.0: USB hub found <6>[ 5.746010] hub 4-0:1.0: 1 port detected <6>[ 5.756093] dwc3 12400000.dwc3: changing max_speed on rev 5533200a <4>[ 5.771803] using random self ethernet address <4>[ 5.775179] using random host ethernet address <6>[ 5.781345] usb0: HOST MAC 52:67:11:8c:95:8d <6>[ 5.784424] usb0: MAC 52:c4:39:4f:a5:ea <4>[ 5.788646] using random self ethernet address <4>[ 5.793182] using random host ethernet address <6>[ 5.798395] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008 <6>[ 5.804854] g_ether gadget: g_ether ready <6>[ 5.812854] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling <6>[ 5.818012] s3c-rtc 101e0000.rtc: registered as rtc1 <6>[ 5.827974] exynos-bus: new bus device registered: soc:bus_wcore ( 88700 KHz ~ 532000 KHz) <6>[ 5.837462] exynos-bus: new bus device registered: soc:bus_noc ( 66600 KHz ~ 111000 KHz) <6>[ 5.845823] exynos-bus: new bus device registered: soc:bus_fsys_apb (111000 KHz ~ 222000 KHz) <6>[ 5.855113] exynos-bus: new bus device registered: soc:bus_fsys2 ( 75000 KHz ~ 200000 KHz) <6>[ 5.864646] exynos-bus: new bus device registered: soc:bus_mfc ( 83250 KHz ~ 333000 KHz) <6>[ 5.873728] exynos-bus: new bus device registered: soc:bus_gen ( 88700 KHz ~ 266000 KHz) <6>[ 5.882070] exynos-bus: new bus device registered: soc:bus_peri ( 66600 KHz ~ 66600 KHz) <6>[ 5.891721] exynos-bus: new bus device registered: soc:bus_g2d ( 83250 KHz ~ 333000 KHz) <6>[ 5.900849] exynos-bus: new bus device registered: soc:bus_g2d_acp ( 66500 KHz ~ 266000 KHz) <6>[ 5.910387] exynos-bus: new bus device registered: soc:bus_jpeg ( 75000 KHz ~ 300000 KHz) <6>[ 5.922674] exynos-bus: new bus device registered: soc:bus_jpeg_apb ( 83250 KHz ~ 166500 KHz) <6>[ 5.931824] exynos-bus: new bus device registered: soc:bus_disp1_fimd (120000 KHz ~ 200000 KHz) <6>[ 5.941482] exynos-bus: new bus device registered: soc:bus_disp1 (120000 KHz ~ 300000 KHz) <6>[ 5.950497] exynos-bus: new bus device registered: soc:bus_gscl_scaler (150000 KHz ~ 300000 KHz) <6>[ 5.960548] exynos-bus: new bus device registered: soc:bus_mscl ( 84000 KHz ~ 666000 KHz) <4>[ 5.970764] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s <6>[ 6.016111] max98090 5-0010: MAX98090 REVID=0x43 <6>[ 6.022079] max98090 5-0010: use default 2.8v micbias <6>[ 6.057836] input: gpio_keys as /devices/platform/gpio_keys/input/input0 <6>[ 6.140270] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup <6>[ 6.169624] smsc95xx 1-1.1:1.0 eth0: Link is Down <6>[ 9.321201] smsc95xx 1-1.1:1.0 eth0: Link is Up - 100Mbps/Full - flow control off <6>[ 9.328377] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 9.354634] Sending DHCP requests .., OK <6>[ 12.697959] IP-Config: Got DHCP answer from 192.168.201.1, my address is 192.168.201.220 <6>[ 12.706036] IP-Config: Complete: <6>[ 12.709373] device=eth0, hwaddr=66:20:a1:b5:a9:56, ipaddr=192.168.201.220, mask=255.255.255.0, gw=192.168.201.1 <6>[ 12.720623] host=192.168.201.220, domain=lava-rack, nis-domain=(none) <6>[ 12.727503] bootserver=192.168.201.1, rootserver=192.168.201.1, rootpath= <6>[ 12.727544] nameserver0=192.168.201.1 <6>[ 12.793246] ALSA device list: <6>[ 12.795145] #0: Odroid-XU3 <6>[ 12.803222] Freeing unused kernel memory: 1024K <6>[ 12.808270] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 13.251054] udevd[183]: starting version 3.2.9 <5>[ 13.256944] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 13.262889] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 13.269362] random: udevd: uninitialized urandom read (16 bytes read) <27>[ 13.281527] udevd[183]: specified user 'tss' unknown <27>[ 13.285511] udevd[183]: specified group 'tss' unknown <30>[ 13.309511] udevd[184]: starting eudev-3.2.9 <6>[ 13.735358] mc: Linux media interface: v0.10 <6>[ 13.748098] videodev: Linux video capture interface: v2.00 <6>[ 13.761993] s5p-mfc 11000000.codec: Adding to iommu group 1 <6>[ 13.779998] s5p-mfc 11000000.codec: preallocated 8 MiB buffer for the firmware and context buffers <4>[ 13.788153] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v8.fw failed with error -2 <3>[ 13.797355] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel <6>[ 13.808660] s5p-mfc 11000000.codec: decoder registered as /dev/video0 <6>[ 13.814275] s5p-mfc 11000000.codec: encoder registered as /dev/video1 <6>[ 13.831082] s5p-jpeg 11f50000.jpeg: Adding to iommu group 2 <6>[ 13.836069] s5p-jpeg 11f50000.jpeg: encoder device registered as /dev/video2 <6>[ 13.843213] s5p-jpeg 11f50000.jpeg: decoder device registered as /dev/video3 <6>[ 13.850054] s5p-jpeg 11f50000.jpeg: Samsung S5P JPEG codec <6>[ 13.856807] s5p-jpeg 11f60000.jpeg: Adding to iommu group 3 <6>[ 13.862708] s5p-jpeg 11f60000.jpeg: encoder device registered as /dev/video4 <6>[ 13.873888] s5p-jpeg 11f60000.jpeg: decoder device registered as /dev/video5 <6>[ 13.879771] s5p-jpeg 11f60000.jpeg: Samsung S5P JPEG codec <6>[ 13.921568] exynos-gsc 13e00000.video-scaler: Adding to iommu group 4 <6>[ 13.930393] exynos-gsc 13e10000.video-scaler: Adding to iommu group 5 <4>[ 14.102233] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v8.fw failed with error -2 <3>[ 14.110430] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel <4>[ 14.124117] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v8.fw failed with error -2 <3>[ 14.132176] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel done Saving random seed: <5>[ 14.366220] random: dd: uninitialized urandom read (32 bytes read) OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: <5>[ 14.737401] random: dropbear: uninitialized urandom read (32 bytes read) OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bi / # . /lava-11982352/environment . /lava-11982352/environment / # /lava-11982352/bin/lava-test-runner /lava-11982352/0 /lava-11982352/bin/lava-test-runner /lava-11982352/0 /lava-11982352/0/../bin/lava-test-shell: line 11: /bi: not found # / # #export SHELL=/bin/sh / # export SHELL=/bin/sh. /lava-11982352/environment / # . /lava-11982352/environment/lava-11982352/bin/lava-test-runner /lava-11982352/1 / # /lava-11982352/bin/lava-test-runner /lava-11982352/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-11982352/1/tests/1_bootrr + cat uuid + UUID=11982352_1.5.2.4.5 + set<8>[ 16.311566] +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-11982352/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-11982352/1/../bin/lava-test-case <8>[ 16.480205] /lava-11982352/1/../bin/lava-test-case <8>[ 16.634778] /lava-11982352/1/../bin/lava-test-case <8>[ 16.698620] + set +x <8>[ 16.767500] / #