connecting to NetworkSerialPort(target=Target(name='imx6qp-wandboard-revd1-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4009, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4009 connected to 10.8.254.5 (port 4009) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2020.05.0-00156-g60b1a02e5a-dirty #28 Sat Jun 27 00:22:32 CEST 2020 Board: Technexion EDM1-CF-IMX6 Quad Plus with PMIC and fairy baseboard detected i.MX6 Quad Plus revision 2.0 i.MX reset reason POR (SRSR: 0x00000001) i.MX6 Quad Plus unique ID: e1fdfca7020b09d4 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2190000.usdhc@2190000.of: registered as mmc0 imx-esdhc 2194000.usdhc@2194000.of: registered as mmc1 imx-esdhc 2198000.usdhc@2198000.of: registered as mmc2 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-ipuv3 2800000.ipu@2800000.of: IPUv3H probed imx-ldb ldb.of: Neither display timings in ldb node nor remote panel found netconsole: registered as netconsole-1 malloc space: 0x4fe7a7c0 -> 0x8fcf4f7f (size 1022.5 MiB) [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/1015379/tftp-deploy-pgcacg3z/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/1015379/tftp-deploy-pgcacg3z/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/1015379/tftp-deploy-pgcacg3z/kernel/zImage [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/1015379/tftp-deploy-pgcacg3z/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/1015379/tftp-deploy-pgcacg3z/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/1015379/tftp-deploy-pgcacg3z/kernel/zImage eth0: 1000Mbps full duplex link detected [33mWARNING:[0m eth0: No MAC address set. Using random address 32:ac:af:7b:2c:da T eth0: DHCP client bound to address 10.8.254.18 Loading ARM Linux zImage '/mnt/tftp/1015379/tftp-deploy-pgcacg3z/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x13266000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/1015379/tftp-deploy-pgcacg3z/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x189b853d Loading devicetree from '/mnt/tftp/1015379/tftp-deploy-pgcacg3z/dtb/imx6qp-wandboard-revd1.dtb' commandline: console=ttymxc0,115200n8 Starting kernel at 0x13266000, initrd at 0x18000000, oftree at 0x189b9000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.201-cip41 (KernelCI@build-j37893-arm-gcc-10-imx-v6-v7-defconfig-djrlt) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Thu Dec 7 19:53:29 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wandboard i.MX6 QuadPlus Board revD1 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0x8a000000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000010000000-0x000000003fffffff] [ 0.000000] HighMem [mem 0x0000000040000000-0x000000008fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000010000000-0x000000008fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000008fffffff] [ 0.000000] percpu: Embedded 20 pages/cpu s51948 r8192 d21780 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752 [ 0.000000] Kernel command line: console=ttymxc0,115200n8 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1972720K/2097152K available (14336K kernel code, 2028K rwdata, 4856K rodata, 1024K init, 6663K bss, 58896K reserved, 65536K cma-reserved, 1244144K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Running RCU self tests [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU lockdep checking is enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76470001 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000009] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000039] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.001885] Console: colour dummy device 80x30 [ 0.001941] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001965] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001987] ... MAX_LOCK_DEPTH: 48 [ 0.002007] ... MAX_LOCKDEP_KEYS: 8192 [ 0.002027] ... CLASSHASH_SIZE: 4096 [ 0.002048] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.002069] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.002088] ... CHAINHASH_SIZE: 32768 [ 0.002110] memory used by lock dependency info: 4061 kB [ 0.002131] memory used for stack traces: 2112 kB [ 0.002151] per task-struct memory footprint: 1536 bytes [ 0.002276] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.002317] CPU: Testing write buffer coherency: ok [ 0.002459] CPU0: Spectre v2: using BPIALL workaround [ 0.002487] pid_max: default: 32768 minimum: 301 [ 0.002884] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.002929] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.007473] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.010338] Setting up static identity map for 0x10100000 - 0x10100078 [ 0.011024] rcu: Hierarchical SRCU implementation. [ 0.013257] smp: Bringing up secondary CPUs ... [ 0.016188] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.016202] CPU1: Spectre v2: using BPIALL workaround [ 0.019544] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.019559] CPU2: Spectre v2: using BPIALL workaround [ 0.022442] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.022457] CPU3: Spectre v2: using BPIALL workaround [ 0.023023] smp: Brought up 1 node, 4 CPUs [ 0.023058] SMP: Total of 4 processors activated (24.00 BogoMIPS). [ 0.023083] CPU: All CPU(s) started in SVC mode. [ 0.025625] devtmpfs: initialized [ 0.059613] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.062238] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.062315] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.066362] pinctrl core: initialized pinctrl subsystem [ 0.072493] NET: Registered protocol family 16 [ 0.094670] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.099653] thermal_sys: Registered thermal governor 'step_wise' [ 0.100162] cpuidle: using governor menu [ 0.100319] CPU identified as i.MX6QP, silicon rev 1.0 [ 0.498555] vdd1p1: supplied by regulator-dummy [ 0.519441] vdd3p0: supplied by regulator-dummy [ 0.539696] vdd2p5: supplied by regulator-dummy [ 0.559888] vddarm: supplied by regulator-dummy [ 0.580935] vddpu: supplied by regulator-dummy [ 0.600676] vddsoc: supplied by regulator-dummy [ 1.521862] No ATAGs? [ 1.522414] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 1.522510] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 1.527664] imx6q-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver [ 1.629882] imx6q-pinctrl 20e0000.pinctrl: pin MX6Q_PAD_EIM_D22 already requested by 20e0000.pinctrl; cannot claim for regulator-usbotgvbus [ 1.629921] imx6q-pinctrl 20e0000.pinctrl: pin-42 (regulator-usbotgvbus) status -22 [ 1.629954] imx6q-pinctrl 20e0000.pinctrl: could not request pin 42 (MX6Q_PAD_EIM_D22) from group usbotgvbusgrp on device 20e0000.pinctrl [ 1.629981] reg-fixed-voltage regulator-usbotgvbus: Error applying setting, reverse things back [ 1.630074] reg-fixed-voltage: probe of regulator-usbotgvbus failed with error -22 [ 1.634329] vgaarb: loaded [ 1.636477] SCSI subsystem initialized [ 1.638167] usbcore: registered new interface driver usbfs [ 1.638420] usbcore: registered new interface driver hub [ 1.638585] usbcore: registered new device driver usb [ 1.638977] usb_phy_generic usbphynop1: supply vcc not found, using dummy regulator [ 1.640084] usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests [ 1.640529] usb_phy_generic usbphynop2: supply vcc not found, using dummy regulator [ 1.641217] usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests [ 1.645034] i2c i2c-0: IMX I2C adapter registered [ 1.652742] i2c i2c-1: IMX I2C adapter registered [ 1.658186] i2c i2c-2: IMX I2C adapter registered [ 1.659085] mc: Linux media interface: v0.10 [ 1.659229] videodev: Linux video capture interface: v2.00 [ 1.660017] pps_core: LinuxPPS API ver. 1 registered [ 1.660047] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.660116] PTP clock support registered [ 1.661867] Advanced Linux Sound Architecture Driver Initialized. [ 1.666630] Bluetooth: Core ver 2.22 [ 1.666767] NET: Registered protocol family 31 [ 1.666795] Bluetooth: HCI device and connection manager initialized [ 1.666926] Bluetooth: HCI socket layer initialized [ 1.666972] Bluetooth: L2CAP socket layer initialized [ 1.667146] Bluetooth: SCO socket layer initialized [ 1.669859] clocksource: Switched to clocksource mxc_timer1 [ 3.067755] VFS: Disk quotas dquot_6.6.0 [ 3.067948] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 3.100758] NET: Registered protocol family 2 [ 3.101415] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 3.104172] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 22528 bytes, linear) [ 3.104713] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 3.104883] TCP bind hash table entries: 8192 (order: 6, 327680 bytes, linear) [ 3.106067] TCP: Hash tables configured (established 8192 bind 8192) [ 3.106620] UDP hash table entries: 512 (order: 3, 49152 bytes, linear) [ 3.106838] UDP-Lite hash table entries: 512 (order: 3, 49152 bytes, linear) [ 3.107579] NET: Registered protocol family 1 [ 3.110354] RPC: Registered named UNIX socket transport module. [ 3.110458] RPC: Registered udp transport module. [ 3.110486] RPC: Registered tcp transport module. [ 3.110512] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 3.112200] PCI: CLS 0 bytes, default 64 [ 3.113791] Trying to unpack rootfs image as initramfs... [ 4.281362] Freeing initrd memory: 9956K [ 4.282783] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 4.283639] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 4.289980] Initialise system trusted keyrings [ 4.290856] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 4.313210] NFS: Registering the id_resolver key type [ 4.313438] Key type id_resolver registered [ 4.313542] Key type id_legacy registered [ 4.313855] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 4.313974] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 4.314166] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 4.315870] fuse: init (API version 7.32) [ 4.409451] Key type asymmetric registered [ 4.409632] Asymmetric key parser 'x509' registered [ 4.410078] bounce: pool size: 64 pages [ 4.410228] io scheduler mq-deadline registered [ 4.410259] io scheduler kyber registered [ 4.432189] imx-sdma 20ec000.dma-controller: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 4.432313] imx-sdma 20ec000.dma-controller: Falling back to sysfs fallback for: imx/sdma/sdma-imx6q.bin [ 4.437963] mxs-dma 110000.dma-controller: initialized [ 4.450558] pfuze100-regulator 2-0008: Full layer: 2, Metal layer: 1 [ 4.451501] pfuze100-regulator 2-0008: FAB: 0, FIN: 0 [ 4.451533] pfuze100-regulator 2-0008: pfuze100 found. [ 4.484552] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 33, base_baud = 5000000) is a IMX [ 5.439490] printk: console [ttymxc0] enabled [ 5.448919] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 77, base_baud = 5000000) is a IMX [ 5.491607] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops) [ 5.498298] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops) [ 5.504736] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops) [ 5.510500] etnaviv-gpu 130000.gpu: model: GC3000, revision: 5450 [ 5.517437] etnaviv-gpu 134000.gpu: model: GC320, revision: 5303 [ 5.523730] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1216 [ 5.529922] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 [ 5.538980] [drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor 0 [ 5.557345] imx-ipuv3 2400000.ipu: IPUv3H probed [ 5.569688] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_crtc_ops) [ 5.577622] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_crtc_ops) [ 5.585566] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops ipu_crtc_ops) [ 5.593443] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops ipu_crtc_ops) [ 5.602168] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with HDCP (DWC HDMI 3D TX PHY) [ 5.618611] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops) [ 5.629143] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1 [ 5.638955] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 5.647191] imx-ipuv3 2800000.ipu: IPUv3H probed [ 5.684839] brd: module loaded [ 5.722816] loop: module loaded [ 5.728702] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024 [ 5.736798] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480 [ 5.745069] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000 [ 5.753350] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 [ 5.761588] ahci-imx 2200000.sata: supply ahci not found, using dummy regulator [ 5.769578] ahci-imx 2200000.sata: supply phy not found, using dummy regulator [ 5.777279] ahci-imx 2200000.sata: supply target not found, using dummy regulator [ 5.788459] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled [ 5.795559] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 5.804424] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 5.817889] scsi host0: ahci-imx [ 5.823001] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 84 [ 5.843931] CAN device driver interface [ 5.855357] pps pps0: new PPS source ptp0 [ 5.902168] fec 2188000.ethernet eth0: registered PHC device 0 [ 5.911739] usbcore: registered new interface driver r8152 [ 5.917372] usbcore: registered new interface driver lan78xx [ 5.923253] usbcore: registered new interface driver asix [ 5.928780] usbcore: registered new interface driver ax88179_178a [ 5.935049] usbcore: registered new interface driver cdc_ether [ 5.941111] usbcore: registered new interface driver smsc95xx [ 5.946984] usbcore: registered new interface driver net1080 [ 5.952823] usbcore: registered new interface driver cdc_subset [ 5.958860] usbcore: registered new interface driver zaurus [ 5.964640] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 5.972292] usbcore: registered new interface driver cdc_ncm [ 5.977977] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.984566] ehci-pci: EHCI PCI platform driver [ 5.989144] ehci-mxc: Freescale On-Chip EHCI Host driver [ 5.995632] usbcore: registered new interface driver usb-storage [ 6.022355] snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc0 [ 6.028562] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01T00:00:00 UTC (0) [ 6.038282] i2c /dev entries driver [ 6.056635] Bluetooth: HCI UART driver ver 2.3 [ 6.061184] Bluetooth: HCI UART protocol H4 registered [ 6.066428] Bluetooth: HCI UART protocol LL registered [ 6.075145] sdhci: Secure Digital Host Controller Interface driver [ 6.081439] sdhci: Copyright(c) Pierre Ossman [ 6.085825] sdhci-pltfm: SDHCI platform and OF driver helper [ 6.094817] sdhci-esdhc-imx 2190000.mmc: Got CD GPIO [ 6.095757] caam 2100000.crypto: Entropy delay = 3200 [ 6.103509] sdhci-esdhc-imx 2198000.mmc: Got CD GPIO [ 6.139593] mmc1: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA [ 6.148512] mmc0: SDHCI controller on 2190000.mmc [2190000.mmc] using ADMA [ 6.148550] mmc2: SDHCI controller on 2198000.mmc [2198000.mmc] using ADMA [ 6.162626] ata1: SATA link down (SStatus 0 SControl 300) [ 6.165828] caam 2100000.crypto: Instantiated RNG4 SH0 [ 6.168468] ahci-imx 2200000.sata: no device found, disabling link. [ 6.179647] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug [ 6.226590] caam 2100000.crypto: Instantiated RNG4 SH1 [ 6.232153] caam 2100000.crypto: device ID = 0x0a16010000000000 (Era 4) [ 6.238876] caam 2100000.crypto: job rings = 2, qi = 0 [ 6.274078] caam algorithms registered in /proc/crypto [ 6.284050] mmc0: host does not support reading read-only switch, assuming write-enable [ 6.284503] caam 2100000.crypto: registering rng-caam [ 6.298158] mmc0: new high speed SDHC card at address 1234 [ 6.303508] usbcore: registered new interface driver usbhid [ 6.307647] mmcblk0: mmc0:1234 SA04G 3.64 GiB [ 6.309301] usbhid: USB HID core driver [ 6.324997] ipu1_csi0: Registered ipu1_csi0 capture as /dev/video0 [ 6.333366] ipu1_ic_prpenc: Registered ipu1_ic_prpenc capture as /dev/video1 [ 6.341503] ipu1_ic_prpvf: Registered ipu1_ic_prpvf capture as /dev/video2 [ 6.349650] ipu1_csi1: Registered ipu1_csi1 capture as /dev/video3 [ 6.356881] ipu2_csi0: Registered ipu2_csi0 capture as /dev/video4 [ 6.364378] ipu2_ic_prpenc: Registered ipu2_ic_prpenc capture as /dev/video5 [ 6.372218] ipu2_ic_prpvf: Registered ipu2_ic_prpvf capture as /dev/video6 [ 6.380748] ipu2_csi1: Registered ipu2_csi1 capture as /dev/video7 [ 6.393305] mmc2: new DDR MMC card at address 0001 [ 6.400251] mmcblk2: mmc2:0001 S10004 3.56 GiB [ 6.405682] mmcblk2boot0: mmc2:0001 S10004 partition 1 4.00 MiB [ 6.412935] mmcblk2boot1: mmc2:0001 S10004 partition 2 4.00 MiB [ 6.414386] sgtl5000 1-000a: sgtl5000 revision 0x11 [ 6.420158] mmcblk2rpmb: mmc2:0001 S10004 partition 3 4.00 MiB, chardev (243:0) [ 6.429806] sgtl5000 1-000a: Using internal LDO instead of VDDD: check ER1 erratum [ 6.439590] mmcblk2: p1 p2 [ 6.481388] random: crng init done [ 6.490591] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 7.032814] NET: Registered protocol family 10 [ 7.041911] Segment Routing with IPv6 [ 7.045723] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 7.054089] NET: Registered protocol family 17 [ 7.058598] can: controller area network core [ 7.063365] NET: Registered protocol family 29 [ 7.067840] can: raw protocol [ 7.071075] can: broadcast manager protocol [ 7.075323] can: netlink gateway - max_hops=1 [ 7.080291] Key type dns_resolver registered [ 7.099102] Registering SWP/SWPB emulation handler [ 7.104553] Loading compiled-in X.509 certificates [ 7.226889] imx_usb 2184200.usb: No over current polarity defined [ 7.237945] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 7.243749] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 7.280330] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 7.289726] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 7.298566] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.305985] usb usb1: Product: EHCI Host Controller [ 7.311020] usb usb1: Manufacturer: Linux 5.10.201-cip41 ehci_hcd [ 7.317172] usb usb1: SerialNumber: ci_hdrc.0 [ 7.328576] hub 1-0:1.0: USB hub found [ 7.332727] hub 1-0:1.0: 1 port detected [ 7.347160] imx_thermal 20c8000.anatop:tempmon: Automotive CPU temperature grade - max:125C critical:120C passive:115C [ 7.366894] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 7.427434] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 7.435872] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 7.439832] ALSA device list: [ 7.444592] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db [ 7.447509] #0: imx6-wandboard-sgtl5000 [ 7.459330] #1: imx-spdif [ 7.465972] Freeing unused kernel memory: 1024K [ 7.541237] Run /init as init process [ 7.650129] usb 1-1: new high-speed USB device number 2 using ci_hdrc Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: [ 7.891865] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 4.01 [ 7.900299] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.901063] udevd[208]: starting version 3.2.9 [ 7.907485] usb 1-1: Product: USB2.0 Hub [ 7.915996] usb 1-1: Manufacturer: GenesysLogic [ 7.924778] hub 1-1:1.0: USB hub found [ 7.925614] udevd[208]: specified user 'tss' unknown [ 7.929833] hub 1-1:1.0: 4 ports detected [ 7.934050] udevd[208]: specified group 'tss' unknown [ 7.950295] udevd[209]: starting eudev-3.2.9 [ 8.553804] coda 2040000.vpu: Direct firmware load for vpu_fw_imx6q.bin failed with error -2 [ 8.562574] coda 2040000.vpu: Falling back to sysfs fallback for: vpu_fw_imx6q.bin [ 8.791594] ov5645 1-003c: ov5645_write_reg: write reg error -6: reg=3103, val=11 [ 8.799387] ov5645 1-003c: could not set init registers [ 8.813935] ov5645 1-003c: could not power up OV5645 done Saving random seed: OK Starting network: OK Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-1015379/environment . /lava-1015379/environment / # /lava-1015379/bin/lava-test-runner /lava-1015379/0 /lava-1015379/bin/lava-test-runner /lava-1015379/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-1015379/0/tests/0_dmesg + cat uuid + UUID=1015379_1.5.2.3.1[ 10.022424] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 10.131376] [ 10.223109] [ 10.318101] + set +x [ 10.329052] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-1015379/environment / # . /lava-1015379/environment/lava-1015379/bin/lava-test-runner /lava-1015379/1 / # /lava-1015379/bin/lava-test-runner /lava-1015379/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-1015379/1/tests/1_bootrr + cat uuid + UUID=1015379_1.5.2.3.5[ 10.921056] + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-1015379/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto 2184000.usb /lava-1015379/1/../bin/lava-test-case [ 12.087110] /lava-1015379/1/../bin/lava-test-case [ 12.186745] /lava-1015379/1/../bin/lava-test-case [ 12.242056] + set +x [ 12.281515] / #