Trying 192.168.56.21... Connected to conserv1. Escape character is '^]'. ser2net port telnet,3004 device serialdev, /dev/serial/by-path/platform-fd500000.pcie-pci-0000:01:00.0-usb-0:1.2.2.2:1.0-port0, 115200n81, local=false [] (Debian GNU/Linux) U-Boot SPL 2015.10-00061-g68849f9 (Jan 08 2016 - 17:01:43) U-Boot 2015.10-00061-g68849f9 (Jan 08 2016 - 17:01:43 +0100) CPU: Freescale i.MX6DL rev1.1 at 792 MHz Reset cause: POR Board: UDOO DualLite DRAM: 1 GiB MMC: FSL_SDHC: 0 *** Warning - bad CRC, using default environment No panel detected: default to HDMI Display: HDMI (1024x768) In: serial Out: serial Err: serial Net: using phy at 6 FEC [PRIME] Hit any key to stop autoboot: 3  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.... done BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 BOOTP broadcast 5 *** Unhandled DHCP Option in OFFER/ACK: 42 *** Unhandled DHCP Option in OFFER/ACK: 42 DHCP client bound to address 192.168.56.143 (3849 ms) => setenv serverip 192.168.56.76 setenv serverip 192.168.56.76 => tftp 0x12000000 579665/tftp-deploy-1ehocnyf/kernel/zImage tftp 0x12000000 579665/tftp-deploy-1ehocnyf/kernel/zImage Using FEC device TFTP from server 192.168.56.76; our IP address is 192.168.56.143 Filename '579665/tftp-deploy-1ehocnyf/kernel/zImage'. Load address: 0x12000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############ 8.1 MiB/s done Bytes transferred = 9716224 (944200 hex) => tftp 0x13000000 579665/tftp-deploy-1ehocnyf/ramdisk/ramdisk.cpio.gz.uboot tftp 0x13000000 579665/tftp-deploy-1ehocnyf/ramdisk/ramdisk.cpio.gz.uboot Using FEC device TFTP from server 192.168.56.76; our IP address is 192.168.56.143 Filename '579665/tftp-deploy-1ehocnyf/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x13000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################# 10.2 MiB/s done Bytes transferred = 12159843 (b98b63 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x18000000 579665/tftp-deploy-1ehocnyf/dtb/imx6dl-udoo.dtb tftp 0x18000000 579665/tftp-deploy-1ehocnyf/dtb/imx6dl-udoo.dtb Using FEC device TFTP from server 192.168.56.76; our IP address is 192.168.56.143 Filename '579665/tftp-deploy-1ehocnyf/dtb/imx6dl-udoo.dtb'. Load address: 0x18000000 Loading: *### 6.7 MiB/s done Bytes transferred = 35319 (89f7 hex) => setenv bootargs 'console=ttymxc1,115200n8 root=/dev/nfs rw nfsroot=192.168.56.76:/var/lib/lava/dispatcher/tmp/579665/extract-nfsrootfs-udd2w0o0,tcp,hard console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttymxc1,115200n8 root=/dev/nfs rw nfsroot=192.168.56.76:/var/lib/lava/dispatcher/tmp/579665/extract-nfsrootfs-udd2w0o0,tcp,hard console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' => bootz 0x12000000 0x13000000 0x18000000 bootz 0x12000000 0x13000000 0x18000000 Kernel image @ 0x12000000 [ 0x000000 - 0x944200 ] ## Loading init Ramdisk from Legacy Image at 13000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 12159779 Bytes = 11.6 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 18000000 Booting using the fdt blob at 0x18000000 Using Device Tree in place at 18000000, end 1800b9f6 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.209-cip44 (KernelCI@build-j106860-arm-gcc-10-multi-v7-defconfig-6hp2s) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Tue Feb 13 17:16:56 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Udoo i.MX6 Dual-lite Board [ 0.000000] earlycon: ec_imx21 at MMIO 0x021e8000 (options '') [ 0.000000] printk: bootconsole [ec_imx21] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x4c000000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000010000000-0x000000003fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000040000000-0x000000004fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000010000000-0x000000004fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000004fffffff] [ 0.000000] percpu: Embedded 20 pages/cpu s49868 r8192 d23860 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260608 [ 0.000000] Kernel command line: console=ttymxc1,115200n8 root=/dev/nfs rw nfsroot=192.168.56.76:/var/lib/lava/dispatcher/tmp/579665/extract-nfsrootfs-udd2w0o0,tcp,hard console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 936668K/1048576K available (14336K kernel code, 2239K rwdata, 5364K rodata, 2048K init, 424K bss, 46372K reserved, 65536K cma-reserved, 196608K highmem) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] L2C-310 erratum 769419 enabled <6>[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 <6>[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 <6>[ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines <6>[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled <6>[ 0.000000] L2C-310 cache controller enabled, 16 ways, 512 kB <6>[ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76450001 <6>[ 0.000000] Switching to timer-based delay loop, resolution 333ns <6>[ 0.000008] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns <6>[ 0.008442] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns <6>[ 0.021694] Console: colour dummy device 80x30 <6>[ 0.023592] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) <6>[ 0.034001] CPU: Testing write buffer coherency: ok <6>[ 0.039131] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.044427] pid_max: default: 32768 minimum: 301 <6>[ 0.049449] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.056888] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.065804] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 <6>[ 0.071472] Setting up static identity map for 0x10300000 - 0x103000ac <6>[ 0.079028] rcu: Hierarchical SRCU implementation. <6>[ 0.085585] EFI services will not be available. <6>[ 0.087767] smp: Bringing up secondary CPUs ... <6>[ 0.093119] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 <6>[ 0.093129] CPU1: Spectre v2: using BPIALL workaround <6>[ 0.103686] smp: Brought up 1 node, 2 CPUs <6>[ 0.107916] SMP: Total of 2 processors activated (12.00 BogoMIPS). <6>[ 0.114320] CPU: All CPU(s) started in SVC mode. <6>[ 0.119755] devtmpfs: initialized <6>[ 0.128798] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 <6>[ 0.134121] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.144027] futex hash table entries: 512 (order: 3, 32768 bytes, linear) <6>[ 0.154133] pinctrl core: initialized pinctrl subsystem <6>[ 0.158568] DMI not present or invalid. <6>[ 0.161624] NET: Registered protocol family 16 <6>[ 0.168107] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.175001] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.175179] cpuidle: using governor menu <6>[ 0.183340] CPU identified as i.MX6DL, silicon rev 1.1 <6>[ 0.295690] vdd1p1: supplied by regulator-dummy <6>[ 0.303610] vdd3p0: supplied by regulator-dummy <6>[ 0.311481] vdd2p5: supplied by regulator-dummy <6>[ 0.319395] vddarm: supplied by regulator-dummy <6>[ 0.327483] vddpu: supplied by regulator-dummy <6>[ 0.335084] vddsoc: supplied by regulator-dummy <6>[ 0.519207] No ATAGs? <6>[ 0.519342] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. <6>[ 0.527177] hw-breakpoint: maximum watchpoint size is 4 bytes. <6>[ 0.536802] imx6dl-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver <6>[ 0.545956] Serial: AMBA PL011 UART driver <6>[ 0.578386] iommu: Default domain type: Translated <6>[ 0.580961] vgaarb: loaded <5>[ 0.584474] SCSI subsystem initialized <6>[ 0.588199] usbcore: registered new interface driver usbfs <6>[ 0.593420] usbcore: registered new interface driver hub <6>[ 0.599054] usbcore: registered new device driver usb <6>[ 0.605522] i2c i2c-1: IMX I2C adapter registered <6>[ 0.609874] i2c i2c-2: IMX I2C adapter registered <6>[ 0.615330] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.619428] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.628836] PTP clock support registered <6>[ 0.636591] clocksource: Switched to clocksource mxc_timer1 <6>[ 1.750226] NET: Registered protocol family 2 <6>[ 1.752229] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 1.760841] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) <6>[ 1.768330] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 1.776336] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 1.783807] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 1.790414] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 1.797212] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 1.804644] NET: Registered protocol family 1 <6>[ 1.809730] RPC: Registered named UNIX socket transport module. <6>[ 1.815243] RPC: Registered udp transport module. <6>[ 1.820265] RPC: Registered tcp transport module. <6>[ 1.825160] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 1.831893] PCI: CLS 0 bytes, default 64 <6>[ 1.836501] Trying to unpack rootfs image as initramfs... <6>[ 2.732099] Freeing initrd memory: 11876K <4>[ 2.733973] hw perfevents: no interrupt-affinity property for /pmu, guessing. <6>[ 2.741245] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available <5>[ 2.750951] Initialise system trusted keyrings <6>[ 2.754421] workingset: timestamp_bits=30 max_order=18 bucket_order=0 <6>[ 2.766657] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 2.770752] NFS: Registering the id_resolver key type <5>[ 2.775300] Key type id_resolver registered <5>[ 2.779699] Key type id_legacy registered <6>[ 2.784024] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 2.790899] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <6>[ 2.798576] ntfs: driver 2.1.32 [Flags: R/O]. <5>[ 2.803616] Key type asymmetric registered <5>[ 2.807522] Asymmetric key parser 'x509' registered <6>[ 2.812669] bounce: pool size: 64 pages <6>[ 2.816772] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) <6>[ 2.824370] io scheduler mq-deadline registered <6>[ 2.829187] io scheduler kyber registered <6>[ 2.865878] mxs-dma 110000.dma-controller: initialized <4>[ 2.873381] imx-sdma 20ec000.dma-controller: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 <6>[ 2.881222] imx-sdma 20ec000.dma-controller: external firmware not found, using ROM firmware <6>[ 2.948949] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled <6>[ 2.956921] SuperH (H)SCI(F) driver initialized <6>[ 2.959904] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 70, base_baud = 5000000) is a IMX <6>[ 2.967822] printk: console [ttymxc1] enabled <6>[ 2.967822] printk: console [ttymxc1] enabled <6>[ 2.976975] printk: bootconsole [ec_imx21] disabled <6>[ 2.976975] printk: bootconsole [ec_imx21] disabled <6>[ 2.988188] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 71, base_baud = 5000000) is a IMX <6>[ 3.000494] msm_serial: driver initialized <6>[ 3.005081] STMicroelectronics ASC driver initialized <6>[ 3.012146] STM32 USART driver initialized <6>[ 3.033394] brd: module loaded <6>[ 3.042885] loop: module loaded <6>[ 3.060497] CAN device driver interface <6>[ 3.065721] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded <6>[ 3.074096] pps pps0: new PPS source ptp0 <6>[ 3.095799] fec 2188000.ethernet eth0: registered PHC device 0 <6>[ 3.103229] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 3.108514] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 3.114777] igb: Intel(R) Gigabit Ethernet Network Driver <6>[ 3.120476] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 3.131705] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver <6>[ 3.139450] usbcore: registered new interface driver pegasus <6>[ 3.145416] usbcore: registered new interface driver asix <6>[ 3.151158] usbcore: registered new interface driver ax88179_178a <6>[ 3.157574] usbcore: registered new interface driver cdc_ether <6>[ 3.163715] usbcore: registered new interface driver smsc75xx <6>[ 3.169799] usbcore: registered new interface driver smsc95xx <6>[ 3.175847] usbcore: registered new interface driver net1080 <6>[ 3.181837] usbcore: registered new interface driver cdc_subset <6>[ 3.188075] usbcore: registered new interface driver zaurus <6>[ 3.193987] usbcore: registered new interface driver cdc_ncm <6>[ 3.203067] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>[ 3.209908] ehci-pci: EHCI PCI platform driver <6>[ 3.214663] ehci-platform: EHCI generic platform driver <6>[ 3.220452] ehci-orion: EHCI orion driver <6>[ 3.224937] SPEAr-ehci: EHCI SPEAr driver <6>[ 3.229431] ehci-st: EHCI STMicroelectronics driver <6>[ 3.234746] ehci-exynos: EHCI Exynos driver <6>[ 3.239391] ehci-atmel: EHCI Atmel driver <6>[ 3.243826] tegra-ehci: Tegra EHCI driver <6>[ 3.248327] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver <6>[ 3.254796] ohci-pci: OHCI PCI platform driver <6>[ 3.259579] ohci-platform: OHCI generic platform driver <6>[ 3.265312] SPEAr-ohci: OHCI SPEAr driver <6>[ 3.269801] ohci-st: OHCI STMicroelectronics driver <6>[ 3.275123] ohci-atmel: OHCI Atmel driver <6>[ 3.280570] usbcore: registered new interface driver usb-storage <6>[ 3.294446] i2c /dev entries driver <6>[ 3.316932] sdhci: Secure Digital Host Controller Interface driver <6>[ 3.323382] sdhci: Copyright(c) Pierre Ossman <6>[ 3.330545] Synopsys Designware Multimedia Card Interface Driver <6>[ 3.338626] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 3.347432] sdhci-esdhc-imx 2198000.mmc: Got CD GPIO <6>[ 3.352858] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 3.360246] usbcore: registered new interface driver usbhid <6>[ 3.366090] usbhid: USB HID core driver <6>[ 3.376422] NET: Registered protocol family 10 <6>[ 3.382274] Segment Routing with IPv6 <6>[ 3.386300] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 3.392769] mmc2: SDHCI controller on 2198000.mmc [2198000.mmc] using ADMA <6>[ 3.393160] NET: Registered protocol family 17 <6>[ 3.404700] can: controller area network core <6>[ 3.409443] NET: Registered protocol family 29 <6>[ 3.414158] can: raw protocol <6>[ 3.417424] can: broadcast manager protocol <6>[ 3.421883] can: netlink gateway - max_hops=1 <5>[ 3.427042] Key type dns_resolver registered <6>[ 3.433485] ThumbEE CPU extension supported. <5>[ 3.438119] Registering SWP/SWPB emulation handler <5>[ 3.443798] Loading compiled-in X.509 certificates <4>[ 3.467918] imx_usb 2184000.usb: No over current polarity defined <4>[ 3.502762] mmc2: host does not support reading read-only switch, assuming write-enable <6>[ 3.513327] mmc2: new high speed SDXC card at address 59b4 <6>[ 3.520276] mmcblk2: mmc2:59b4 SD128 119 GiB <6>[ 3.528579] mmcblk2: p1 p2 <3>[ 4.080824] mxs_phy 20c9000.usbphy: Data pin can't make good contact. <4>[ 4.091876] imx_usb 2184200.usb: No over current polarity defined