Trying 192.168.1.205... Connected to ts5. Escape character is '^]'. ser2net port telnet,2002 device serialdev,/dev/ttyUSB-lf-bbb-02,115200n81,local [] (Debian GNU/Linux) U-Boot SPL 2021.10-nethacked-for-LAVA_hws@denx.de-dirty (Oct 19 2021 - 19:02:35 +0200) Trying to boot from MMC2 U-Boot 2021.10-nethacked-for-LAVA_hws@denx.de-dirty (Oct 19 2021 - 19:02:35 +0200) CPU : AM335X-GP rev 2.1 Model: TI AM335x BeagleBone Black DRAM: 512 MiB WDT: Started with servicing (60s timeout) NAND: 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from FAT... not set. Validating first E-fuse MAC Net: eth2: ethernet@4a100000, eth3: usb_ether Hit any key to stop autoboot: 2  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp link up on port 0, speed 100, full duplex BOOTP broadcast 1 DHCP client bound to address 172.16.3.134 (77 ms) => setenv serverip 172.16.3.3 setenv serverip 172.16.3.3 => tftp 0x82000000 1115053/tftp-deploy-xm9fkavg/kernel/zImage tftp 0x82000000 1115053/tftp-deploy-xm9fkavg/kernel/zImage link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 172.16.3.3; our IP address is 172.16.3.134 Filename '1115053/tftp-deploy-xm9fkavg/kernel/zImage'. Load address: 0x82000000 Loading: *################################################## 4.4 MiB 4.4 MiB/s done Bytes transferred = 4612384 (466120 hex) => tftp 0x83000000 1115053/tftp-deploy-xm9fkavg/ramdisk/ramdisk.cpio.gz.uboot tftp 0x83000000 1115053/tftp-deploy-xm9fkavg/ramdisk/ramdisk.cpio.gz.uboot link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 172.16.3.3; our IP address is 172.16.3.134 Filename '1115053/tftp-deploy-xm9fkavg/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x83000000 Loading: *################################################## 10.4 MiB 4.9 MiB/s done Bytes transferred = 10928930 (a6c322 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x88000000 1115053/tftp-deploy-xm9fkavg/dtb/am335x-boneblack.dtb tftp 0x88000000 1115053/tftp-deploy-xm9fkavg/dtb/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 172.16.3.3; our IP address is 172.16.3.134 Filename '1115053/tftp-deploy-xm9fkavg/dtb/am335x-boneblack.dtb'. Load address: 0x88000000 Loading: *################################################## 61.4 KiB 4.3 MiB/s done Bytes transferred = 62861 (f58d hex) => setenv bootargs 'console=ttyO0,115200n8 root=/dev/nfs rw nfsroot=172.16.3.3:/var/lib/lava/dispatcher/tmp/1115053/extract-nfsrootfs-n6_vwy3a,tcp,hard,v3 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttyO0,115200n8 root=/dev/nfs rw nfsroot=172.16.3.3:/var/lib/lava/dispatcher/tmp/1115053/extract-nfsrootfs-n6_vwy3a,tcp,hard,v3 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' => bootz 0x82000000 0x83000000 0x88000000 bootz 0x82000000 0x83000000 0x88000000 Kernel image @ 0x82000000 [ 0x000000 - 0x466120 ] ## Loading init Ramdisk from Legacy Image at 83000000 ... Image Name: Created: 2024-04-03 1:27:09 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 10928866 Bytes = 10.4 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Using Device Tree in place at 88000000, end 8801258c Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.212-cip45 (KernelCI@build-j153727-arm-gcc-10-omap2plus-defconfig-ngnc6) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Wed Apr 3 00:58:34 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black [ 0.000000] earlycon: omap8250 at MMIO 0x44e09000 (options '') [ 0.000000] printk: bootconsole [omap8250] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 16 MiB at 0x9e800000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.1 (sgx neon) [ 0.000000] percpu: Embedded 20 pages/cpu s49740 r8192 d23988 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129412 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/nfs rw nfsroot=172.16.3.3:/var/lib/lava/dispatcher/tmp/1115053/extract-nfsrootfs-n6_vwy3a,tcp,hard,v3 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 475192K/522240K available (9216K kernel code, 1027K rwdata, 2176K rodata, 1024K init, 278K bss, 30664K reserved, 16384K cma-reserved, 0K highmem) <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts <6>[ 0.000000] TI gptimer clocksource: always-on /ocp/interconnect@44c00000/segment@200000/target-module@31000 <6>[ 0.000011] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns <6>[ 0.008342] clocksource: dmtimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns <6>[ 0.018559] TI gptimer clockevent: 24000000 Hz at /ocp/interconnect@48000000/segment@0/target-module@40000 <6>[ 0.030206] Console: colour dummy device 80x30 <3>[ 0.035077] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' <3>[ 0.042136] This ensures that you still see kernel messages. Please <3>[ 0.048859] update your kernel commandline. <6>[ 0.053462] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) <6>[ 0.095538] CPU: Testing write buffer coherency: ok <6>[ 0.100918] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.106383] pid_max: default: 32768 minimum: 301 <6>[ 0.111543] LSM: Security Framework initializing <6>[ 0.116642] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.124457] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.134101] CPU0: thread -1, cpu 0, socket -1, mpidr 0 <6>[ 0.140618] Setting up static identity map for 0x80100000 - 0x80100078 <6>[ 0.147822] rcu: Hierarchical SRCU implementation. <6>[ 0.153604] smp: Bringing up secondary CPUs ... <6>[ 0.158541] smp: Brought up 1 node, 1 CPU <6>[ 0.162969] SMP: Total of 1 processors activated (996.14 BogoMIPS). <6>[ 0.169697] CPU: All CPU(s) started in SVC mode. <6>[ 0.175410] devtmpfs: initialized <6>[ 0.191857] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 <6>[ 0.200456] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.210895] futex hash table entries: 256 (order: 2, 16384 bytes, linear) <6>[ 0.219448] pinctrl core: initialized pinctrl subsystem <6>[ 0.227013] NET: Registered protocol family 16 <6>[ 0.234616] DMA: preallocated 256 KiB pool for atomic coherent allocations <3>[ 0.261067] l3-aon-clkctrl:0000:0: failed to disable <6>[ 0.267170] audit: initializing netlink subsys (disabled) <6>[ 0.274248] thermal_sys: Registered thermal governor 'fair_share' <6>[ 0.274260] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.280868] thermal_sys: Registered thermal governor 'user_space' <6>[ 0.287606] cpuidle: using governor menu <5>[ 1.167228] audit: type=2000 audit(0.230:1): state=initialized audit_enabled=0 res=1 <6>[ 1.292470] No ATAGs? <6>[ 1.295095] hw-breakpoint: debug architecture 0x4 unsupported. <6>[ 1.319790] Kprobes globally optimized <6>[ 1.332932] iommu: Default domain type: Translated <6>[ 1.340075] vgaarb: loaded <5>[ 1.343661] SCSI subsystem initialized <6>[ 1.348720] pps_core: LinuxPPS API ver. 1 registered <6>[ 1.354228] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 1.363965] PTP clock support registered <6>[ 1.369787] clocksource: Switched to clocksource dmtimer <5>[ 2.008012] VFS: Disk quotas dquot_6.6.0 <6>[ 2.012521] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) <6>[ 2.029308] NET: Registered protocol family 2 <6>[ 2.034489] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 2.043151] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) <6>[ 2.052104] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) <6>[ 2.060395] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) <6>[ 2.068054] TCP: Hash tables configured (established 4096 bind 4096) <6>[ 2.074993] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 2.082021] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 2.089652] NET: Registered protocol family 1 <6>[ 2.095405] RPC: Registered named UNIX socket transport module. <6>[ 2.101871] RPC: Registered udp transport module. <6>[ 2.106978] RPC: Registered tcp transport module. <6>[ 2.112105] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 2.119011] PCI: CLS 0 bytes, default 64 <6>[ 2.124095] Trying to unpack rootfs image as initramfs... <6>[ 2.840379] Freeing initrd memory: 10676K <6>[ 2.846021] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available <5>[ 2.856443] Initialise system trusted keyrings <6>[ 2.861898] workingset: timestamp_bits=14 max_order=17 bucket_order=3 <5>[ 2.870302] NFS: Registering the id_resolver key type <5>[ 2.875826] Key type id_resolver registered <5>[ 2.880474] Key type id_legacy registered <6>[ 2.884925] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. <5>[ 2.892922] Key type asymmetric registered <5>[ 2.897415] Asymmetric key parser 'x509' registered <6>[ 2.902756] io scheduler mq-deadline registered <6>[ 2.907685] io scheduler kyber registered <3>[ 3.046016] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.054723] omap_gpio 44e07000.gpio: Could not register gpio chip -517 <4>[ 3.163692] ti-sysc: probe of 44e31000.target-module failed with error -16 <4>[ 3.205803] ti-sysc: probe of 48040000.target-module failed with error -16 <3>[ 3.277671] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.286377] omap_gpio 4804c000.gpio: Could not register gpio chip -517 <3>[ 3.346387] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.355078] omap_gpio 481ac000.gpio: Could not register gpio chip -517 <3>[ 3.372648] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.381323] omap_gpio 481ae000.gpio: Could not register gpio chip -517 <3>[ 3.445145] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present! <6>[ 3.453708] edma 49000000.dma: TI EDMA DMA engine driver <6>[ 3.480757] pinctrl-single 44e10800.pinmux: 142 pins, size 568 <6>[ 3.495254] Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled <6>[ 3.506228] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 20, base_baud = 3000000) is a 8250 <6>[ 3.515656] printk: console [ttyS0] enabled <6>[ 3.515656] printk: console [ttyS0] enabled <6>[ 3.524725] printk: bootconsole [omap8250] disabled <6>[ 3.524725] printk: bootconsole [omap8250] disabled <6>[ 3.548603] brd: module loaded <6>[ 3.559338] loop: module loaded <3>[ 3.564973] mtdoops: mtd device (mtddev=name/number) must be supplied <6>[ 3.629546] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000 <6>[ 3.659109] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 <6>[ 3.669042] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4 <6>[ 3.675766] cpsw 4a100000.ethernet: ALE Table size 1024 <6>[ 3.681556] cpsw 4a100000.ethernet: cpts: overflow check period 500 (jiffies) <6>[ 3.689059] cpsw 4a100000.ethernet: Detected MACID = 04:79:b7:e7:06:e0 <6>[ 3.698151] i2c /dev entries driver <5>[ 3.703812] cpuidle: enable-method property 'ti,am3352' found operations <6>[ 3.711717] sdhci: Secure Digital Host Controller Interface driver <6>[ 3.718198] sdhci: Copyright(c) Pierre Ossman <6>[ 3.723622] sdhci-pltfm: SDHCI platform and OF driver helper <4>[ 3.731933] sdhci-omap 481d8000.mmc: supply vqmmc not found, using dummy regulator <6>[ 3.741783] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 3.750305] Initializing XFRM netlink socket <6>[ 3.755101] NET: Registered protocol family 10 <6>[ 3.761608] Segment Routing with IPv6 <6>[ 3.765654] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 3.772750] NET: Registered protocol family 17 <6>[ 3.777513] NET: Registered protocol family 15 <5>[ 3.782449] Key type dns_resolver registered <6>[ 3.787599] oprofile: using arm/armv7 <6>[ 3.791736] ThumbEE CPU extension supported. <5>[ 3.796307] Registering SWP/SWPB emulation handler <3>[ 3.801829] omap_voltage_late_init: Voltage driver support not added <3>[ 3.808493] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize <3>[ 3.816934] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize <6>[ 3.825626] SmartReflex Class3 initialized <6>[ 3.830473] mmc1: SDHCI controller on 481d8000.mmc [481d8000.mmc] using External DMA <5>[ 3.839325] Loading compiled-in X.509 certificates <6>[ 3.864330] OMAP GPIO hardware version 0.1 <4>[ 3.900230] tps65217-pmic: Failed to locate of_node [id: -1] <4>[ 3.913919] tps65217-bl: Failed to locate of_node [id: -1] <6>[ 3.922673] tps65217 0-0024: TPS65217 ID 0xe version 1.2 <6>[ 3.929023] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz <6>[ 3.939087] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz <6>[ 3.950496] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22) <6>[ 3.959596] sdhci-omap 48060000.mmc: Got CD GPIO <4>[ 3.964754] sdhci-omap 48060000.mmc: supply vqmmc not found, using dummy regulator <6>[ 3.975155] mmc1: new high speed MMC card at address 0001 <6>[ 3.982109] mmcblk1: mmc1:0001 M62704 3.56 GiB <6>[ 3.987362] mmcblk1boot0: mmc1:0001 M62704 partition 1 2.00 MiB <6>[ 3.994066] mmcblk1boot1: mmc1:0001 M62704 partition 2 2.00 MiB <6>[ 4.001607] mmcblk1rpmb: mmc1:0001 M62704 partition 3 512 KiB, chardev (249:0) <6>[ 4.011981] mmcblk1: p1 <6>[ 4.035765] mmc0: SDHCI controller on 48060000.mmc [48060000.mmc] using External DMA <6>[ 4.045433] cpsw 4a100000.ethernet: initializing cpsw version 1.12 (0) <6>[ 4.131141] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL) <6>[ 6.280240] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off <6>[ 6.309563] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 6.339664] Sending DHCP requests ., OK <6>[ 6.443667] IP-Config: Got DHCP answer from 172.16.3.3, my address is 172.16.3.134 <6>[ 6.451574] IP-Config: Complete: <6>[ 6.455084] device=eth0, hwaddr=04:79:b7:e7:06:e0, ipaddr=172.16.3.134, mask=255.255.255.0, gw=172.16.3.3 <6>[ 6.465416] host=172.16.3.134, domain=denx.de, nis-domain=(none) <6>[ 6.472166] bootserver=172.16.3.33, rootserver=172.16.3.3, rootpath= <6>[ 6.472172] nameserver0=172.16.3.3 <6>[ 6.483378] ntpserver0=172.16.3.3 <6>[ 6.490319] Freeing unused kernel memory: 1024K <6>[ 6.500063] Run /init as init process Loading, please wait... Starting systemd-udevd version 252.12-1~deb12u1 <4>[ 7.715649] at24 0-0050: supply vcc not found, using dummy regulator <4>[ 7.775201] tps6521x_pwrbutton tps65217-pwrbutton: DMA mask not set <3>[ 7.815171] wkup_m3_ipc 44e11324.wkup_m3_ipc: IPC Request for A8->M3 Channel failed! -517 <6>[ 7.875135] remoteproc remoteproc0: wkup_m3 is available <3>[ 7.900387] wkup_m3_ipc 44e11324.wkup_m3_ipc: IPC Request for A8->M3 Channel failed! -517 <6>[ 7.919872] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write <4>[ 7.927462] at24 2-0054: supply vcc not found, using dummy regulator <6>[ 7.957505] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec <6>[ 7.965618] input: tps65217_pwrbutton as /devices/platform/ocp/44c00000.interconnect/44c00000.interconnect:segment@200000/44e0b000.target-module/44e0b000.i2c/i2c-0/0-0024/tps65217-pwrbutton/input/input0 <4>[ 8.028819] am335x-phy-driver 47401300.usb-phy: supply vcc not found, using dummy regulator <4>[ 8.037946] am335x-phy-driver 47401300.usb-phy: dummy supplies not allowed for exclusive requests <6>[ 8.064738] omap_rtc 44e3e000.rtc: registered as rtc0 <6>[ 8.070285] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01T00:00:00 UTC (946684800) <4>[ 8.145834] at24 2-0055: supply vcc not found, using dummy regulator <3>[ 8.160428] wkup_m3_ipc 44e11324.wkup_m3_ipc: IPC Request for A8->M3 Channel failed! -517 <6>[ 8.170891] usbcore: registered new interface driver usbfs <6>[ 8.176733] usbcore: registered new interface driver hub <6>[ 8.182510] usbcore: registered new device driver usb <4>[ 8.244212] at24 2-0056: supply vcc not found, using dummy regulator <6>[ 8.292982] tda998x 0-0070: found TDA19988 <4>[ 8.316786] at24 2-0057: supply vcc not found, using dummy regulator <3>[ 8.375038] wkup_m3_ipc 44e11324.wkup_m3_ipc: IPC Request for A8->M3 Channel failed! -517 <4>[ 8.441454] am335x-phy-driver 47401b00.usb-phy: supply vcc not found, using dummy regulator <4>[ 8.450594] am335x-phy-driver 47401b00.usb-phy: dummy supplies not allowed for exclusive requests <6>[ 8.528873] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 <6>[ 8.591167] remoteproc remoteproc0: powering up wkup_m3 <4>[ 8.596880] remoteproc remoteproc0: Direct firmware load for am335x-pm-firmware.elf failed with error -2 <3>[ 8.606805] remoteproc remoteproc0: request_firmware failed: -2 <3>[ 8.613060] wkup_m3_ipc 44e11324.wkup_m3_ipc: rproc_boot failed <6>[ 8.716553] musb-hdrc musb-hdrc.1: MUSB HDRC host driver <6>[ 8.722353] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 <3>[ 8.836059] davinci-mcasp 48038000.mcasp: IRQ common not found <6>[ 8.961860] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 <6>[ 8.970610] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 8.978133] usb usb1: Product: MUSB HDRC host driver <6>[ 8.983416] usb usb1: Manufacturer: Linux 5.10.212-cip45 musb-hcd <6>[ 8.989818] usb usb1: SerialNumber: musb-hdrc.1 <6>[ 9.005899] omap_rng 48310000.rng: Random Number Generator ver. 20 <5>[ 9.013545] random: crng init done <6>[ 9.095407] tilcdc 4830e000.lcdc: bound 0-0070 (ops tda998x_driver_exit [tda998x]) <6>[ 9.146753] [drm] Initialized tilcdc 1.0.0 20121205 for 4830e000.lcdc on minor 0 <3>[ 9.232794] PM: Cannot get wkup_m3_ipc handle <6>[ 9.279370] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 <6>[ 9.286101] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes <6>[ 9.299736] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 <6>[ 9.350532] omap-sham 53100000.sham: will run requests pump with realtime priority <6>[ 9.359135] omap-aes 53500000.aes: will run requests pump with realtime priority <6>[ 9.370140] hub 1-0:1.0: USB hub found <6>[ 9.395299] hub 1-0:1.0: 1 port detected <3>[ 9.452407] PM: Cannot get wkup_m3_ipc handle <6>[ 9.462652] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes <3>[ 9.529087] PM: Cannot get wkup_m3_ipc handle <3>[ 9.874326] PM: Cannot get wkup_m3_ipc handle <3>[ 9.911497] PM: Cannot get wkup_m3_ipc handle Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/nfs-top ... done. Begin: Running /scripts/nfs-premount ... done. Begin: Waiting up to 180 secs for any network device to become available ... done. IP-Config: eth0 hardware address 04:79:b7:e7:06:e0 mtu 1500 DHCP IP-Config: eth0 complete (dhcp from 172.16.3.3): address: 172.16.3.134 broadcast: 172.16.3.255 netmask: 255.255.255.0 gateway: 172.16.3.3 dns0 : 172.16.3.3 dns1 : 0.0.0.0 domain : denx.de rootserver: 172.16.3.33 rootpath: filename : this-host-is-not-configured.kpxe done. Begin: Running /scripts/nfs-bottom ... done. Begin: Running /scripts/init-bottom ... mount: No such file or directory mount: invalid option -- done. mount: No such file or directory run-init: opening console: No such file or directory Target filesystem doesn't have requested /sbin/init. run-init: opening console: No such file or directory run-init: opening console: No such file or directory run-init: opening console: No such file or directory run-init: opening console: No such file or directory run-init: opening console: No such file or directory No init found. Try passing init= bootarg. (initramfs) <3>[ 64.520229] PM: Cannot get wkup_m3_ipc handle <6>[ 64.525129] platform pm33xx: deferred probe pending