[Enter `^Ec?' for help] U-Boot 2016.03-rc1-00131-g39af3d8-dirty (Feb 09 2016 - 16:39:49 +0000) DRAM: 944 MiB WARNING: Caches not enabled RPI Model B+ (0x10) MMC: bcm2835_sdhci: 0 reading uboot.env In: serial Out: lcd Err: lcd Net: Net Initialization Skipped No ethernet found. starting USB... USB0: Core Release: 2.80a scanning bus 0 for devices... 4 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found Hit any key to stop autoboot: 2  0 U-Boot> usb start usb start U-Boot> setenv autoload no setenv autoload no U-Boot> setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff U-Boot> setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff U-Boot> dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.201.14 (276 ms) U-Boot> setenv serverip 192.168.201.1 setenv serverip 192.168.201.1 U-Boot> tftp 0x01000000 13255321/tftp-deploy-ze7apzuz/kernel/zImage tftp 0x01000000 13255321/tftp-deploy-ze7apzuz/kernel/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.201.1; our IP address is 192.168.201.14 Filename '13255321/tftp-deploy-ze7apzuz/kernel/zImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ####### 522.5 KiB/s done Bytes transferred = 5819872 (58cde0 hex) U-Boot>tftp 0x02200000 13255321/tftp-deploy-ze7apzuz/ramdisk/ramdisk.cpio.gz.uboot tftp 0x02200000 13255321/tftp-deploy-ze7apzuz/ramdisk/ramdisk.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.201.1; our IP address is 192.168.201.14 Filename '13255321/tftp-deploy-ze7apzuz/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x2200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################### 1.1 MiB/s done Bytes transferred = 9277315 (8d8f83 hex) U-Boot> setenv initrd_size ${filesize} setenv initrd_size ${filesize} U-Boot> tftp 0x00000100 13255321/tftp-deploy-ze7apzuz/dtb/bcm2836-rpi-2-b.dtb tftp 0x00000100 13255321/tftp-deploy-ze7apzuz/dtb/bcm2836-rpi-2-b.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.201.1; our IP address is 192.168.201.14 Filename '13255321/tftp-deploy-ze7apzuz/dtb/bcm2836-rpi-2-b.dtb'. Load address: 0x100 Loading: *# 890.6 KiB/s done Bytes transferred = 13687 (3577 hex) U-Boot> setenv bootargs 'console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' U-Boot> bootz 0x01000000 0x02200000 0x00000100 bootz 0x01000000 0x02200000 0x00000100 Kernel image @ 0x1000000 [ 0x000000 - 0x58cde0 ] ## Loading init Ramdisk from Legacy Image at 02200000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 9277251 Bytes = 8.8 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 00000100 Booting using the fdt blob at 0x000100 reserving fdt memory region: addr=0 size=1000 Using Device Tree in place at 00000100, end 00006676 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.214-cip46 (KernelCI@build-j155191-arm-gcc-10-bcm2835-defconfig-ttc22) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 Thu Apr 4 13:11:51 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 2 Model B [ 0.000000] earlycon: pl11 at MMIO 0x3f201000 (options '115200n8') [ 0.000000] printk: bootconsole [pl11] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Ignoring RAM at 0x30000000-0x3b000000 [ 0.000000] Consider using a HIGHMEM enabled kernel. [ 0.000000] Reserved memory: created CMA memory pool at 0x2c000000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm/kernel/devtree.c:148 arm_dt_init_cpu_maps+0x1b8/0x200 [ 0.000000] DT /cpu 2 nodes greater than max cores 1, capping them [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.10.214-cip46 #1 [ 0.000000] Hardware name: BCM2835 [ 0.000000] Backtrace: [ 0.000000] [] (dump_backtrace) from [] (show_stack+0x20/0x24) [ 0.000000] r7:c0e01edc r6:00000000 r5:00000009 r4:c0bbf42f [ 0.000000] [] (show_stack) from [] (dump_stack+0x28/0x30) [ 0.000000] [] (dump_stack) from [] (__warn+0x9c/0xdc) [ 0.000000] r5:00000009 r4:c0b35df0 [ 0.000000] [] (__warn) from [] (warn_slowpath_fmt+0x88/0xcc) [ 0.000000] r9:c0f75c08 r8:c0b35e69 r7:00000009 r6:c0d04ce8 r5:00000094 r4:c0b35df0 [ 0.000000] [] (warn_slowpath_fmt) from [] (arm_dt_init_cpu_maps+0x1b8/0x200) [ 0.000000] r8:c0b35d9d r7:00000000 r6:ff000000 r5:00000000 r4:eb9d96c4 [ 0.000000] [] (arm_dt_init_cpu_maps) from [] (setup_arch+0x26c/0x644) [ 0.000000] r10:c0e01f70 r9:c0e01f68 r8:ebffff00 r7:c0bcd0c8 r6:2fffffff r5:c0e08738 [ 0.000000] r4:c0d3400c [ 0.000000] [] (setup_arch) from [] (start_kernel+0x64/0x51c) [ 0.000000] r10:10c53c7d r9:410fc075 r8:00000100 r7:c0f9003c r6:c0e04240 r5:00000051 [ 0.000000] r4:c0d004b0 [ 0.000000] [] (start_kernel) from [<00000000>] (0x0) [ 0.000000] r9:410fc075 r8:00000100 r7:00000000 r6:10c03c7d r5:00000051 r4:c0d004b0 [ 0.000000] ---[ end trace 58996bc4bee07162 ]--- [ 0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 195072 [ 0.000000] Kernel command line: console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 689044K/786432K available (8192K kernel code, 1596K rwdata, 3256K rodata, 1024K init, 713K bss, 31852K reserved, 65536K cma-reserved) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 <6>[ 0.000000] ftrace: allocating 32774 entries in 97 pages <6>[ 0.000000] ftrace: allocated 97 pages with 3 groups <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <3>[ 0.000000] [Firmware Bug]: Bootloader left irq enabled: bank 1 irq 9 <6>[ 0.000019] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns <6>[ 0.008822] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns <6>[ 0.018641] bcm2835: system timer (irq = 27) <6>[ 0.023751] arch_timer: cp15 timer(s) running at 19.20MHz (virt). <6>[ 0.030239] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns <6>[ 0.041511] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns <6>[ 0.049937] Switching to timer-based delay loop, resolution 52ns <6>[ 0.056722] Console: colour dummy device 80x30 <6>[ 0.061586] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) <6>[ 0.072430] CPU: Testing write buffer coherency: ok <6>[ 0.077732] pid_max: default: 32768 minimum: 301 <6>[ 0.083107] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.090840] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.101116] Setting up static identity map for 0x100000 - 0x100054 <6>[ 0.109382] devtmpfs: initialized <6>[ 0.118866] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 <6>[ 0.127277] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.137602] futex hash table entries: 256 (order: -1, 3072 bytes, linear) <6>[ 0.148082] pinctrl core: initialized pinctrl subsystem <6>[ 0.155689] NET: Registered protocol family 16 <6>[ 0.162646] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.173264] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.173766] No ATAGs? <6>[ 0.182798] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. <6>[ 0.191222] hw-breakpoint: maximum watchpoint size is 8 bytes. <6>[ 0.197764] Serial: AMBA PL011 UART driver <6>[ 0.222766] Kprobes globally optimized <5>[ 0.232234] SCSI subsystem initialized <6>[ 0.236654] usbcore: registered new interface driver usbfs <6>[ 0.242663] usbcore: registered new interface driver hub <6>[ 0.248401] usbcore: registered new device driver usb <4>[ 0.254082] usb_phy_generic phy: supply vcc not found, using dummy regulator <4>[ 0.261721] usb_phy_generic phy: dummy supplies not allowed for exclusive requests <6>[ 0.269985] mc: Linux media interface: v0.10 <6>[ 0.274648] videodev: Linux video capture interface: v2.00 <6>[ 0.280786] Advanced Linux Sound Architecture Driver Initialized. <6>[ 0.288019] Bluetooth: Core ver 2.22 <6>[ 0.292036] NET: Registered protocol family 31 <6>[ 0.296831] Bluetooth: HCI device and connection manager initialized <6>[ 0.303594] Bluetooth: HCI socket layer initialized <6>[ 0.308833] Bluetooth: L2CAP socket layer initialized <6>[ 0.314275] Bluetooth: SCO socket layer initialized <6>[ 0.320121] clocksource: Switched to clocksource arch_sys_counter <6>[ 0.572073] simple-framebuffer 3b006000.framebuffer: framebuffer at 0x3b006000, 0x85400 bytes, mapped to 0x(ptrval) <6>[ 0.583076] simple-framebuffer 3b006000.framebuffer: format=r5g6b5, mode=656x416x16, linelength=1312 <6>[ 0.596472] Console: switching to colour frame buffer device 82x26 <6>[ 0.606083] simple-framebuffer 3b006000.framebuffer: fb0: simplefb registered! <6>[ 0.623743] NET: Registered protocol family 2 <6>[ 0.628948] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 0.638375] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) <6>[ 0.647266] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 0.655530] TCP bind hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 0.663170] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 0.670159] UDP hash table entries: 512 (order: 1, 8192 bytes, linear) <6>[ 0.677110] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes, linear) <6>[ 0.684697] NET: Registered protocol family 1 <6>[ 0.690230] RPC: Registered named UNIX socket transport module. <6>[ 0.696539] RPC: Registered udp transport module. <6>[ 0.701617] RPC: Registered tcp transport module. <6>[ 0.706676] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.715488] Unpacking initramfs... <6>[ 1.511965] Freeing initrd memory: 9060K <6>[ 1.517459] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available <5>[ 1.527581] Initialise system trusted keyrings <6>[ 1.532824] workingset: timestamp_bits=30 max_order=18 bucket_order=0 <6>[ 1.550223] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). <5>[ 1.674443] Key type asymmetric registered <5>[ 1.678887] Asymmetric key parser 'x509' registered <6>[ 1.684361] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) <6>[ 1.692195] io scheduler mq-deadline registered <6>[ 1.697080] io scheduler kyber registered <6>[ 1.709856] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled <6>[ 1.722162] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver <6>[ 1.733426] usbcore: registered new interface driver zd1211rw <6>[ 1.739636] usbcore: registered new interface driver lan78xx <6>[ 1.745797] usbcore: registered new interface driver asix <6>[ 1.751632] usbcore: registered new interface driver ax88179_178a <6>[ 1.758155] usbcore: registered new interface driver cdc_ether <6>[ 1.764470] usbcore: registered new interface driver smsc95xx <6>[ 1.770656] usbcore: registered new interface driver net1080 <6>[ 1.776734] usbcore: registered new interface driver cdc_subset <6>[ 1.783143] usbcore: registered new interface driver zaurus <6>[ 1.789178] usbcore: registered new interface driver cdc_ncm <6>[ 1.795853] usbcore: registered new interface driver usb-storage <6>[ 1.802474] i2c /dev entries driver <4>[ 1.808780] i2c-bcm2835 3f805000.i2c: Could not read clock-frequency property <6>[ 1.818403] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer <6>[ 1.825624] sdhci: Secure Digital Host Controller Interface driver <6>[ 1.832224] sdhci: Copyright(c) Pierre Ossman <6>[ 1.837218] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 1.844652] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 1.851625] usbcore: registered new interface driver usbhid <6>[ 1.857572] usbhid: USB HID core driver <6>[ 1.861954] bcm2835-mbox 3f00b880.mailbox: mailbox enabled <6>[ 1.869936] NET: Registered protocol family 10 <6>[ 1.876158] Segment Routing with IPv6 <6>[ 1.880371] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 1.887512] NET: Registered protocol family 17 <6>[ 1.892918] oprofile: using timer interrupt. <5>[ 1.898017] Loading compiled-in X.509 certificates <6>[ 1.909695] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 81, base_baud = 0) is a PL011 rev2 <6>[ 1.919216] printk: console [ttyAMA0] enabled <6>[ 1.919216] printk: console [ttyAMA0] enabled <6>[ 1.928588] printk: bootconsole [pl11] disabled <6>[ 1.928588] printk: bootconsole [pl11] disabled <6>[ 1.942326] raspberrypi-firmware soc:firmware: Attached to firmware from 2014-12-19T18:44:06 <4>[ 1.953741] ------------[ cut here ]------------ <4>[ 1.958650] WARNING: CPU: 0 PID: 46 at drivers/cpufreq/cpufreq-dt.c:79 dt_cpufreq_probe+0xf8/0x2f0 <4>[ 1.967898] Modules linked in: <4>[ 1.971241] CPU: 0 PID: 46 Comm: kworker/0:3 Tainted: G W 5.10.214-cip46 #1 <4>[ 1.979749] Hardware name: BCM2835 <4>[ 1.983434] Workqueue: events deferred_probe_work_func <4>[ 1.988826] Backtrace: <4>[ 1.991564] [] (dump_backtrace) from [] (show_stack+0x20/0x24) <4>[ 1.999387] r7:00000000 r6:00000000 r5:00000009 r4:c0bbf42f <4>[ 2.005321] [] (show_stack) from [] (dump_stack+0x28/0x30) <4>[ 2.012820] [] (dump_stack) from [] (__warn+0x9c/0xdc) <4>[ 2.019944] r5:00000009 r4:c0ba7f76 <4>[ 2.023796] [] (__warn) from [] (warn_slowpath_fmt+0x88/0xcc) <4>[ 2.031545] r9:c4710bc8 r8:00000000 r7:00000009 r6:c063182c r5:0000004f r4:c0ba7f76 <4>[ 2.039545] [] (warn_slowpath_fmt) from [] (dt_cpufreq_probe+0xf8/0x2f0) <4>[ 2.048245] r8:00000000 r7:c4711810 r6:c4710bc0 r5:c0e08868 r4:00000000 <4>[ 2.055217] [] (dt_cpufreq_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.063942] r10:00000003 r9:c103280c r8:00000000 r7:c1032804 r6:c0f36044 r5:c4711810 <4>[ 2.072032] r4:00000000 <4>[ 2.074830] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.083356] r7:c1032804 r6:c0f36044 r5:00000000 r4:c4711810 <4>[ 2.089274] [] (really_probe) from [] (driver_probe_device+0x194/0x1bc) <4>[ 2.097890] r10:00000003 r9:00000000 r8:c0f25748 r7:c4711810 r6:c46f37fc r5:c0f36044 <4>[ 2.105977] r4:c4711810 <4>[ 2.108775] [] (driver_probe_device) from [] (__device_attach_driver+0xb8/0xf8) <4>[ 2.118086] r8:c0f25748 r7:c4711810 r6:c46f37fc r5:c0f36044 r4:00000001 <4>[ 2.125062] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.134108] r7:c4711854 r6:c051f8b4 r5:c46f37fc r4:00000000 <4>[ 2.140027] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.148551] r6:c4711810 r5:00000001 r4:c4711810 <4>[ 2.153440] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.162226] r7:00000000 r6:c4711810 r5:c0f256f0 r4:c4711810 <4>[ 2.168145] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.177043] [] (bus_probe_device) from [] (device_add+0x604/0x730) <4>[ 2.185225] r7:00000000 r6:c0f253d8 r5:00000000 r4:c4711810 <4>[ 2.191158] [] (device_add) from [] (platform_device_add+0x190/0x1f8) <4>[ 2.199589] r9:c0e0b448 r8:c0e0b428 r7:05f5e100 r6:00000000 r5:00000000 r4:c4711800 <4>[ 2.207601] [] (platform_device_add) from [] (platform_device_register_full+0xf0/0x124) <4>[ 2.217604] r9:05f5e0ff r8:2faf0800 r7:05f5e100 r6:c46f38e0 r5:00000000 r4:c4711800 <4>[ 2.225616] [] (platform_device_register_full) from [] (raspberrypi_cpufreq_probe+0x10c/0x198) <4>[ 2.236222] r7:05f5e100 r6:c0e08868 r5:00000000 r4:00000000 <4>[ 2.242152] [] (raspberrypi_cpufreq_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.251641] r9:c103280c r8:00000000 r7:c1032804 r6:c0f3613c r5:c4711410 r4:00000000 <4>[ 2.259639] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.268167] r7:c1032804 r6:c0f3613c r5:00000000 r4:c4711410 <4>[ 2.274099] [] (really_probe) from [] (driver_probe_device+0x194/0x1bc) <4>[ 2.282721] r10:c47103c0 r9:00000000 r8:c4711210 r7:c4711410 r6:c46f3a2c r5:c0f3613c <4>[ 2.290817] r4:c4711410 <4>[ 2.293615] [] (driver_probe_device) from [] (__device_attach_driver+0xb8/0xf8) <4>[ 2.302924] r8:c4711210 r7:c4711410 r6:c46f3a2c r5:c0f3613c r4:00000001 <4>[ 2.309883] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.318929] r7:c4711454 r6:c051f8b4 r5:c46f3a2c r4:00000000 <4>[ 2.324861] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.333385] r6:c4711410 r5:00000001 r4:c4711410 <4>[ 2.338263] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.347049] r7:00000000 r6:c4711410 r5:c0f256f0 r4:c4711410 <4>[ 2.352980] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.361859] [] (bus_probe_device) from [] (device_add+0x604/0x730) <4>[ 2.370027] r7:00000000 r6:c0f253d8 r5:00000000 r4:c4711410 <4>[ 2.375957] [] (device_add) from [] (platform_device_add+0x190/0x1f8) <4>[ 2.384399] r9:c0e0b448 r8:c0e0b428 r7:00000000 r6:00000000 r5:00000000 r4:c4711400 <4>[ 2.392415] [] (platform_device_add) from [] (platform_device_register_full+0xf0/0x124) <4>[ 2.402417] r9:c4711210 r8:c470c150 r7:00000000 r6:c46f3b18 r5:00000000 r4:c4711400 <4>[ 2.410436] [] (platform_device_register_full) from [] (raspberrypi_clk_probe+0x160/0x31c) <4>[ 2.420695] r7:00000000 r6:00000000 r5:c4710340 r4:00000000 <4>[ 2.426616] [] (raspberrypi_clk_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.435752] r10:00000003 r9:c103280c r8:00000000 r7:c1032804 r6:c0f1f84c r5:c4711210 <4>[ 2.443839] r4:00000000 <4>[ 2.446637] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.455163] r7:c1032804 r6:c0f1f84c r5:00000000 r4:c4711210 <4>[ 2.461092] [] (really_probe) from [] (driver_probe_device+0x194/0x1bc) <4>[ 2.469696] r10:00000003 r9:00000000 r8:c15a0a10 r7:c4711210 r6:c46f3c6c r5:c0f1f84c <4>[ 2.477782] r4:c4711210 <4>[ 2.480595] [] (driver_probe_device) from [] (__device_attach_driver+0xb8/0xf8) <4>[ 2.489891] r8:c15a0a10 r7:c4711210 r6:c46f3c6c r5:c0f1f84c r4:00000001 <4>[ 2.496862] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.505913] r7:c4711254 r6:c051f8b4 r5:c46f3c6c r4:00000000 <4>[ 2.511844] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.520368] r6:c4711210 r5:00000001 r4:c4711210 <4>[ 2.525246] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.534031] r7:00000000 r6:c4711210 r5:c0f256f0 r4:c4711210 <4>[ 2.539951] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.548830] [] (bus_probe_device) from [] (device_add+0x604/0x730) <4>[ 2.557010] r7:00000000 r6:c0f253d8 r5:00000000 r4:c4711210 <4>[ 2.562941] [] (device_add) from [] (platform_device_add+0x190/0x1f8) <4>[ 2.571383] r9:c0e0b448 r8:c0e0b428 r7:c15a0a00 r6:00000000 r5:00000000 r4:c4711200 <4>[ 2.579383] [] (platform_device_add) from [] (platform_device_register_full+0xf0/0x124) <4>[ 2.589385] r9:c103280c r8:00000001 r7:c15a0a00 r6:c46f3d58 r5:00000000 r4:c4711200 <4>[ 2.597402] [] (platform_device_register_full) from [] (rpi_firmware_probe+0x1a4/0x1ec) <4>[ 2.607402] r7:c15a0a00 r6:c15a0a10 r5:c470f680 r4:00000000 <4>[ 2.613339] [] (rpi_firmware_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.622214] r8:00000000 r7:c1032804 r6:c0f37a5c r5:c15a0a10 r4:00000000 <4>[ 2.629173] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.637699] r7:c1032804 r6:c0f37a5c r5:00000000 r4:c15a0a10 <4>[ 2.643628] [] (really_probe) from [] (driver_probe_device+0x194/0x1bc) <4>[ 2.652244] r10:c0f25644 r9:00000000 r8:00000000 r7:c15a0a10 r6:c46f3ea4 r5:c0f37a5c <4>[ 2.660330] r4:c15a0a10 <4>[ 2.663128] [] (driver_probe_device) from [] (__device_attach_driver+0xb8/0xf8) <4>[ 2.672435] r8:00000000 r7:c15a0a10 r6:c46f3ea4 r5:c0f37a5c r4:00000001 <4>[ 2.679394] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.688440] r7:c15a0a54 r6:c051f8b4 r5:c46f3ea4 r4:00000000 <4>[ 2.694374] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.702899] r6:c15a0a10 r5:00000001 r4:c15a0a10 <4>[ 2.707776] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.716562] r7:eb9c7300 r6:c15a0a10 r5:c0f256f0 r4:c15a0a10 <4>[ 2.722496] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.731375] [] (bus_probe_device) from [] (deferred_probe_work_func+0xa8/0xcc) <4>[ 2.740594] r7:eb9c7300 r6:c0f25668 r5:c0f2562c r4:c15a0a10 <4>[ 2.746515] [] (deferred_probe_work_func) from [] (process_one_work+0x194/0x274) <4>[ 2.755908] r7:eb9c7300 r6:c0e0d188 r5:c0f25640 r4:c46ddc80 <4>[ 2.761837] [] (process_one_work) from [] (worker_thread+0x220/0x2e0) <4>[ 2.770280] r10:c15aa6e0 r9:c0f90abc r8:c0e0d19c r7:c0edcaa0 r6:c0e0d188 r5:c46ddc94 <4>[ 2.778355] r4:c46ddc80 <4>[ 2.781168] [] (worker_thread) from [] (kthread+0x11c/0x128) <4>[ 2.788819] r9:c1537e98 r8:c46ddc80 r7:c0134f34 r6:c46f2000 r5:c15aa080 r4:c15aa6c0 <4>[ 2.796832] [] (kthread) from [] (ret_from_fork+0x14/0x2c) <4>[ 2.804315] Exception stack(0xc46f3fb0 to 0xc46f3ff8) <4>[ 2.809621] 3fa0: 00000000 00000000 00000000 00000000 <4>[ 2.818061] 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 <4>[ 2.826504] 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 <4>[ 2.833389] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0139a44 <4>[ 2.841478] r4:c15aa080 r3:00000001 <4>[ 2.845308] ---[ end trace 58996bc4bee07164 ]--- <6>[ 2.850228] sdhost-bcm2835 3f202000.mmc: loaded - DMA enabled (>1) <4>[ 2.859253] dwc2 3f980000.usb: supply vusb_d not found, using dummy regulator <4>[ 2.866908] dwc2 3f980000.usb: supply vusb_a not found, using dummy regulator <6>[ 2.926863] dwc2 3f980000.usb: DWC OTG Controller <6>[ 2.932041] dwc2 3f980000.usb: new USB bus registered, assigned bus number 1 <6>[ 2.939511] dwc2 3f980000.usb: irq 33, io mem 0x3f980000 <6>[ 2.946230] hub 1-0:1.0: USB hub found <6>[ 2.950402] hub 1-0:1.0: 1 port detected <4>[ 2.957661] OF: fdt: not creating '/sys/firmware/fdt': CRC check failed <4>[ 2.993535] mmc0: host does not support reading read-only switch, assuming write-enable <6>[ 3.004132] mmc0: new high speed SDHC card at address 0002 <6>[ 3.010965] mmcblk0: mmc0:0002 NCard 14.9 GiB <6>[ 3.018436] mmcblk0: p1 <6>[ 3.300153] usb 1-1: new high-speed USB device number 2 using dwc2 <6>[ 3.551203] hub 1-1:1.0: USB hub found <6>[ 3.555318] hub 1-1:1.0: 5 ports detected <6>[ 3.880147] usb 1-1.1: new high-speed USB device number 3 using dwc2 <6>[ 4.013434] smsc95xx v2.0.0 <6>[ 4.173748] SMSC LAN8700 usb-001:003:01: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=usb-001:003:01, irq=POLL) <6>[ 4.186150] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:d2:0e:1f <6>[ 4.254417] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup <6>[ 4.271722] smsc95xx 1-1.1:1.0 eth0: Link is Down <6>[ 4.290162] usb 1-1.3: new high-speed USB device number 4 using dwc2 <6>[ 4.426364] usb-storage 1-1.3:1.0: USB Mass Storage device detected <6>[ 4.434003] scsi host0: usb-storage 1-1.3:1.0 <5>[ 5.539831] scsi 0:0:0:0: Direct-Access Kingston DT 101 G2 PMAP PQ: 0 ANSI: 0 CCS <5>[ 5.850176] random: crng init done <5>[ 6.483870] sd 0:0:0:0: [sda] 7669824 512-byte logical blocks: (3.93 GB/3.66 GiB) <5>[ 6.492084] sd 0:0:0:0: [sda] Write Protect is off <3>[ 6.497583] sd 0:0:0:0: [sda] No Caching mode page found <3>[ 6.503219] sd 0:0:0:0: [sda] Assuming drive cache: write through <6>[ 6.542563] sda: sda1 sda2 <5>[ 6.549358] sd 0:0:0:0: [sda] Attached SCSI removable disk <6>[ 7.381760] smsc95xx 1-1.1:1.0 eth0: Link is Up - 100Mbps/Full - flow control off <6>[ 7.410189] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 7.440351] Sending DHCP requests ., OK <6>[ 7.484322] IP-Config: Got DHCP answer from 192.168.201.1, my address is 192.168.201.14 <6>[ 7.492643] IP-Config: Complete: <6>[ 7.496151] device=eth0, hwaddr=b8:27:eb:d2:0e:1f, ipaddr=192.168.201.14, mask=255.255.255.0, gw=192.168.201.1 <6>[ 7.506872] host=bcm2836-rpi-2-b-cbg-0, domain=lava-rack, nis-domain=(none) <6>[ 7.514566] bootserver=192.168.201.1, rootserver=192.168.201.1, rootpath= <6>[ 7.514573] nameserver0=192.168.201.1 <5>[ 7.526831] cfg80211: Loading compiled-in X.509 certificates for regulatory database <5>[ 7.556494] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' <5>[ 7.566203] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' <4>[ 7.574822] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 <6>[ 7.584041] ALSA device list: <6>[ 7.587293] No soundcards found. <6>[ 7.591020] cfg80211: failed to load regulatory.db <6>[ 7.596555] uart-pl011 3f201000.serial: no DMA platform data <6>[ 7.609279] Freeing unused kernel memory: 1024K <6>[ 7.614460] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 7.846122] udevd[93]: starting version 3.2.9 <27>[ 7.865227] udevd[93]: specified user 'tss' unknown <27>[ 7.870860] udevd[93]: specified group 'tss' unknown <30>[ 7.882273] udevd[94]: starting eudev-3.2.9 <4>[ 8.249695] vchiq: module is from the staging directory, the quality is unknown, you have been warned. <6>[ 8.298690] bcm2835-rng 3f104000.rng: hwrng registered <3>[ 8.370804] bcm2835_vchiq 3f00b840.mailbox: failed to set channelbase <6>[ 8.377581] vchiq: could not load vchiq done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-13255321/environment . /lava-13255321/environment / # /lava-13255321/bin/lava-test-runner /lava-13255321/0 /lava-13255321/bin/lava-test-runner /lava-13255321/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-13255321/0/tests/0_dmesg + cat uuid + UUID=13255321_1.5.<8>[ 9.688853] 2.4.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 9.754195] <8>[ 9.814808] <8>[ 9.875562] + set +x <8>[ 9.886580] / #