[Enter `^Ec?' for help] U-Boot 2016.03-rc1-00131-g39af3d8-dirty (Feb 09 2016 - 16:39:49 +0000) DRAM: 944 MiB WARNING: Caches not enabled RPI Model B+ (0x10) MMC: bcm2835_sdhci: 0 reading uboot.env In: serial Out: lcd Err: lcd Net: Net Initialization Skipped No ethernet found. starting USB... USB0: Core Release: 2.80a scanning bus 0 for devices... 4 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found Hit any key to stop autoboot: 2  0 U-Boot> usb start usb start U-Boot> setenv autoload no setenv autoload no U-Boot> setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff U-Boot> setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff U-Boot> dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.201.14 (259 ms) U-Boot> setenv serverip 192.168.201.1 setenv serverip 192.168.201.1 U-Boot> tftp 0x01000000 14191979/tftp-deploy-qyopstbr/kernel/zImage tftp 0x01000000 14191979/tftp-deploy-qyopstbr/kernel/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.201.1; our IP address is 192.168.201.14 Filename '14191979/tftp-deploy-qyopstbr/kernel/zImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ####### 523.4 KiB/s done Bytes transferred = 5823896 (58dd98 hex) U-Boot> tftp 0x02200000 14191979/tftp-deploy-qyopstbr/ramdisk/ramdisk.cpio.gz.uboot tftp 0x02200000 14191979/tftp-deploy-qyopstbr/ramdisk/ramdisk.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.201.1; our IP address is 192.168.201.14 Filename '14191979/tftp-deploy-qyopstbr/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x2200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################ 980.5 KiB/s done Bytes transferred = 9284770 (8daca2 hex) U-Boot> setenv initrd_size ${filesize} setenv initrd_size ${filesize} U-Boot> tftp 0x00000100 14191979/tftp-deploy-qyopstbr/dtb/bcm2836-rpi-2-b.dtb tftp 0x00000100 14191979/tftp-deploy-qyopstbr/dtb/bcm2836-rpi-2-b.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.201.1; our IP address is 192.168.201.14 Filename '14191979/tftp-deploy-qyopstbr/dtb/bcm2836-rpi-2-b.dtb'. Load address: 0x100 Loading: *# 786.1 KiB/s done Bytes transferred = 13687 (3577 hex) U-Boot>setenv bootargs 'console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' U-Boot> bootz 0x01000000 0x02200000 0x00000100 bootz 0x01000000 0x02200000 0x00000100 Kernel image @ 0x1000000 [ 0x000000 - 0x58dd98 ] ## Loading init Ramdisk from Legacy Image at 02200000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 9284706 Bytes = 8.9 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 00000100 Booting using the fdt blob at 0x000100 reserving fdt memory region: addr=0 size=1000 Using Device Tree in place at 00000100, end 00006676 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.218-cip49 (KernelCI@build-j219120-arm-gcc-10-bcm2835-defconfig-ctw6q) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 Thu Jun 6 00:26:27 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 2 Model B [ 0.000000] earlycon: pl11 at MMIO 0x3f201000 (options '115200n8') [ 0.000000] printk: bootconsole [pl11] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Ignoring RAM at 0x30000000-0x3b000000 [ 0.000000] Consider using a HIGHMEM enabled kernel. [ 0.000000] Reserved memory: created CMA memory pool at 0x2c000000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm/kernel/devtree.c:148 arm_dt_init_cpu_maps+0x1b8/0x200 [ 0.000000] DT /cpu 2 nodes greater than max cores 1, capping them [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.10.218-cip49 #1 [ 0.000000] Hardware name: BCM2835 [ 0.000000] Backtrace: [ 0.000000] [] (dump_backtrace) from [] (show_stack+0x20/0x24) [ 0.000000] r7:c0e01edc r6:00000000 r5:00000009 r4:c0bbf949 [ 0.000000] [] (show_stack) from [] (dump_stack+0x28/0x30) [ 0.000000] [] (dump_stack) from [] (__warn+0x9c/0xdc) [ 0.000000] r5:00000009 r4:c0b361cc [ 0.000000] [] (__warn) from [] (warn_slowpath_fmt+0x88/0xcc) [ 0.000000] r9:c0f75c48 r8:c0b36245 r7:00000009 r6:c0d04d08 r5:00000094 r4:c0b361cc [ 0.000000] [] (warn_slowpath_fmt) from [] (arm_dt_init_cpu_maps+0x1b8/0x200) [ 0.000000] r8:c0b36179 r7:00000000 r6:ff000000 r5:00000000 r4:eb9d96c4 [ 0.000000] [] (arm_dt_init_cpu_maps) from [] (setup_arch+0x26c/0x644) [ 0.000000] r10:c0e01f70 r9:c0e01f68 r8:ebffff00 r7:c0bcd0c8 r6:2fffffff r5:c0e08738 [ 0.000000] r4:c0d340c0 [ 0.000000] [] (setup_arch) from [] (start_kernel+0x64/0x528) [ 0.000000] r10:10c53c7d r9:410fc075 r8:00000100 r7:c0f9003c r6:10c03c7d r5:c0e04240 [ 0.000000] r4:c0d004b0 [ 0.000000] [] (start_kernel) from [<00000000>] (0x0) [ 0.000000] r9:410fc075 r8:00000100 r7:00000000 r6:10c03c7d r5:00000051 r4:c0d004b0 [ 0.000000] ---[ end trace 58996bc4bee07162 ]--- [ 0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 195072 [ 0.000000] Kernel command line: console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 689036K/786432K available (8192K kernel code, 1596K rwdata, 3256K rodata, 1024K init, 713K bss, 31860K reserved, 65536K cma-reserved) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 <6>[ 0.000000] ftrace: allocating 32787 entries in 97 pages <6>[ 0.000000] ftrace: allocated 97 pages with 3 groups <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <3>[ 0.000000] [Firmware Bug]: Bootloader left irq enabled: bank 1 irq 9 <6>[ 0.000016] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns <6>[ 0.008814] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns <6>[ 0.018634] bcm2835: system timer (irq = 27) <6>[ 0.023746] arch_timer: cp15 timer(s) running at 19.20MHz (virt). <6>[ 0.030235] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns <6>[ 0.041501] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns <6>[ 0.049931] Switching to timer-based delay loop, resolution 52ns <6>[ 0.056724] Console: colour dummy device 80x30 <6>[ 0.061588] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) <6>[ 0.072433] CPU: Testing write buffer coherency: ok <6>[ 0.077734] pid_max: default: 32768 minimum: 301 <6>[ 0.083102] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.090835] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.101101] Setting up static identity map for 0x100000 - 0x100054 <6>[ 0.109354] devtmpfs: initialized <6>[ 0.118953] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 <6>[ 0.127351] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.137675] futex hash table entries: 256 (order: -1, 3072 bytes, linear) <6>[ 0.148132] pinctrl core: initialized pinctrl subsystem <6>[ 0.155760] NET: Registered protocol family 16 <6>[ 0.162750] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.173388] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.173892] No ATAGs? <6>[ 0.182930] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. <6>[ 0.191362] hw-breakpoint: maximum watchpoint size is 8 bytes. <6>[ 0.197896] Serial: AMBA PL011 UART driver <6>[ 0.222998] Kprobes globally optimized <5>[ 0.232491] SCSI subsystem initialized <6>[ 0.236906] usbcore: registered new interface driver usbfs <6>[ 0.242908] usbcore: registered new interface driver hub <6>[ 0.248645] usbcore: registered new device driver usb <4>[ 0.254326] usb_phy_generic phy: supply vcc not found, using dummy regulator <6>[ 0.262222] mc: Linux media interface: v0.10 <6>[ 0.266910] videodev: Linux video capture interface: v2.00 <6>[ 0.273036] Advanced Linux Sound Architecture Driver Initialized. <6>[ 0.280278] Bluetooth: Core ver 2.22 <6>[ 0.284261] NET: Registered protocol family 31 <6>[ 0.289057] Bluetooth: HCI device and connection manager initialized <6>[ 0.295832] Bluetooth: HCI socket layer initialized <6>[ 0.301072] Bluetooth: L2CAP socket layer initialized <6>[ 0.306515] Bluetooth: SCO socket layer initialized <6>[ 0.312364] clocksource: Switched to clocksource arch_sys_counter <6>[ 0.563633] simple-framebuffer 3b006000.framebuffer: framebuffer at 0x3b006000, 0x85400 bytes, mapped to 0x(ptrval) <6>[ 0.574622] simple-framebuffer 3b006000.framebuffer: format=r5g6b5, mode=656x416x16, linelength=1312 <6>[ 0.588019] Console: switching to colour frame buffer device 82x26 <6>[ 0.597624] simple-framebuffer 3b006000.framebuffer: fb0: simplefb registered! <6>[ 0.615265] NET: Registered protocol family 2 <6>[ 0.620475] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 0.629897] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) <6>[ 0.638784] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 0.647040] TCP bind hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 0.654680] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 0.661650] UDP hash table entries: 512 (order: 1, 8192 bytes, linear) <6>[ 0.668619] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes, linear) <6>[ 0.676208] NET: Registered protocol family 1 <6>[ 0.681685] RPC: Registered named UNIX socket transport module. <6>[ 0.688026] RPC: Registered udp transport module. <6>[ 0.693097] RPC: Registered tcp transport module. <6>[ 0.698157] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.706966] Unpacking initramfs... <6>[ 1.504287] Freeing initrd memory: 9068K <6>[ 1.509747] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available <5>[ 1.519915] Initialise system trusted keyrings <6>[ 1.525134] workingset: timestamp_bits=30 max_order=18 bucket_order=0 <6>[ 1.542528] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). <5>[ 1.670590] Key type asymmetric registered <5>[ 1.675210] Asymmetric key parser 'x509' registered <6>[ 1.680521] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) <6>[ 1.688352] io scheduler mq-deadline registered <6>[ 1.693249] io scheduler kyber registered <6>[ 1.706073] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled <6>[ 1.718309] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver <6>[ 1.729684] usbcore: registered new interface driver zd1211rw <6>[ 1.735958] usbcore: registered new interface driver lan78xx <6>[ 1.742046] usbcore: registered new interface driver asix <6>[ 1.747879] usbcore: registered new interface driver ax88179_178a <6>[ 1.754417] usbcore: registered new interface driver cdc_ether <6>[ 1.760701] usbcore: registered new interface driver smsc95xx <6>[ 1.766885] usbcore: registered new interface driver net1080 <6>[ 1.772980] usbcore: registered new interface driver cdc_subset <6>[ 1.779321] usbcore: registered new interface driver zaurus <6>[ 1.785415] usbcore: registered new interface driver cdc_ncm <6>[ 1.792080] usbcore: registered new interface driver usb-storage <6>[ 1.798699] i2c /dev entries driver <4>[ 1.804915] i2c-bcm2835 3f805000.i2c: Could not read clock-frequency property <6>[ 1.814371] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer <6>[ 1.821577] sdhci: Secure Digital Host Controller Interface driver <6>[ 1.828180] sdhci: Copyright(c) Pierre Ossman <6>[ 1.833228] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 1.840071] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 1.847604] usbcore: registered new interface driver usbhid <6>[ 1.853582] usbhid: USB HID core driver <6>[ 1.857932] bcm2835-mbox 3f00b880.mailbox: mailbox enabled <6>[ 1.865935] NET: Registered protocol family 10 <6>[ 1.872107] Segment Routing with IPv6 <6>[ 1.876311] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 1.883509] NET: Registered protocol family 17 <6>[ 1.888892] oprofile: using timer interrupt. <5>[ 1.894056] Loading compiled-in X.509 certificates <6>[ 1.905740] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 81, base_baud = 0) is a PL011 rev2 <6>[ 1.915277] printk: console [ttyAMA0] enabled <6>[ 1.915277] printk: console [ttyAMA0] enabled <6>[ 1.924621] printk: bootconsole [pl11] disabled <6>[ 1.924621] printk: bootconsole [pl11] disabled <6>[ 1.938317] raspberrypi-firmware soc:firmware: Attached to firmware from 2014-12-19T18:44:06 <4>[ 1.949860] ------------[ cut here ]------------ <4>[ 1.954810] WARNING: CPU: 0 PID: 44 at drivers/cpufreq/cpufreq-dt.c:79 dt_cpufreq_probe+0xfc/0x2f4 <4>[ 1.964033] Modules linked in: <4>[ 1.967360] CPU: 0 PID: 44 Comm: kworker/0:2 Tainted: G W 5.10.218-cip49 #1 <4>[ 1.975880] Hardware name: BCM2835 <4>[ 1.979553] Workqueue: events deferred_probe_work_func <4>[ 1.984957] Backtrace: <4>[ 1.987681] [] (dump_backtrace) from [] (show_stack+0x20/0x24) <4>[ 1.995515] r7:00000000 r6:00000000 r5:00000009 r4:c0bbf949 <4>[ 2.001438] [] (show_stack) from [] (dump_stack+0x28/0x30) <4>[ 2.008937] [] (dump_stack) from [] (__warn+0x9c/0xdc) <4>[ 2.016073] r5:00000009 r4:c0ba8490 <4>[ 2.019912] [] (__warn) from [] (warn_slowpath_fmt+0x88/0xcc) <4>[ 2.027661] r9:c470dbc8 r8:00000000 r7:00000009 r6:c06323f0 r5:0000004f r4:c0ba8490 <4>[ 2.035672] [] (warn_slowpath_fmt) from [] (dt_cpufreq_probe+0xfc/0x2f4) <4>[ 2.044372] r8:00000000 r7:c470e810 r6:c470dbc0 r5:c0e08868 r4:00000000 <4>[ 2.051333] [] (dt_cpufreq_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.060058] r10:00000003 r9:c1032818 r8:00000000 r7:c1032810 r6:c0f36074 r5:c470e810 <4>[ 2.068147] r4:00000000 <4>[ 2.070945] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.079470] r7:c1032810 r6:c0f36074 r5:00000000 r4:c470e810 <4>[ 2.085398] [] (really_probe) from [] (driver_probe_device+0x194/0x1bc) <4>[ 2.094015] r10:00000003 r9:00000000 r8:c0f25768 r7:c470e810 r6:c46bf7fc r5:c0f36074 <4>[ 2.102090] r4:c470e810 <4>[ 2.104899] [] (driver_probe_device) from [] (__device_attach_driver+0xb8/0xf8) <4>[ 2.114210] r8:c0f25768 r7:c470e810 r6:c46bf7fc r5:c0f36074 r4:00000001 <4>[ 2.121172] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.130219] r7:c470e854 r6:c051ff54 r5:c46bf7fc r4:00000000 <4>[ 2.136148] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.144672] r6:c470e810 r5:00000001 r4:c470e810 <4>[ 2.149549] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.158334] r7:00000000 r6:c470e810 r5:c0f25710 r4:c470e810 <4>[ 2.164280] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.173161] [] (bus_probe_device) from [] (device_add+0x600/0x72c) <4>[ 2.181327] r7:00000000 r6:c0f253f8 r5:00000000 r4:c470e810 <4>[ 2.187259] [] (device_add) from [] (platform_device_add+0x190/0x1f8) <4>[ 2.195701] r9:c0e0b448 r8:c0e0b428 r7:05f5e100 r6:00000000 r5:00000000 r4:c470e800 <4>[ 2.203712] [] (platform_device_add) from [] (platform_device_register_full+0xf0/0x124) <4>[ 2.213714] r9:05f5e0ff r8:2faf0800 r7:05f5e100 r6:c46bf8e0 r5:00000000 r4:c470e800 <4>[ 2.221713] [] (platform_device_register_full) from [] (raspberrypi_cpufreq_probe+0x10c/0x198) <4>[ 2.232318] r7:05f5e100 r6:c0e08868 r5:00000000 r4:00000000 <4>[ 2.238248] [] (raspberrypi_cpufreq_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.247736] r9:c1032818 r8:00000000 r7:c1032810 r6:c0f3616c r5:c470e410 r4:00000000 <4>[ 2.255746] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.264275] r7:c1032810 r6:c0f3616c r5:00000000 r4:c470e410 <4>[ 2.270192] [] (really_probe) from [] (driver_probe_device+0x194/0x1bc) <4>[ 2.278813] r10:c470d340 r9:00000000 r8:c470e210 r7:c470e410 r6:c46bfa2c r5:c0f3616c <4>[ 2.286900] r4:c470e410 <4>[ 2.289697] [] (driver_probe_device) from [] (__device_attach_driver+0xb8/0xf8) <4>[ 2.299014] r8:c470e210 r7:c470e410 r6:c46bfa2c r5:c0f3616c r4:00000001 <4>[ 2.305985] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.315031] r7:c470e454 r6:c051ff54 r5:c46bfa2c r4:00000000 <4>[ 2.320950] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.329473] r6:c470e410 r5:00000001 r4:c470e410 <4>[ 2.334362] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.343147] r7:00000000 r6:c470e410 r5:c0f25710 r4:c470e410 <4>[ 2.349064] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.357941] [] (bus_probe_device) from [] (device_add+0x600/0x72c) <4>[ 2.366120] r7:00000000 r6:c0f253f8 r5:00000000 r4:c470e410 <4>[ 2.372038] [] (device_add) from [] (platform_device_add+0x190/0x1f8) <4>[ 2.380480] r9:c0e0b448 r8:c0e0b428 r7:00000000 r6:00000000 r5:00000000 r4:c470e400 <4>[ 2.388497] [] (platform_device_add) from [] (platform_device_register_full+0xf0/0x124) <4>[ 2.398499] r9:c470e210 r8:c4709090 r7:00000000 r6:c46bfb18 r5:00000000 r4:c470e400 <4>[ 2.406517] [] (platform_device_register_full) from [] (raspberrypi_clk_probe+0x160/0x31c) <4>[ 2.416776] r7:00000000 r6:00000000 r5:c470d2c0 r4:00000000 <4>[ 2.422708] [] (raspberrypi_clk_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.431832] r10:00000003 r9:c1032818 r8:00000000 r7:c1032810 r6:c0f1f86c r5:c470e210 <4>[ 2.439919] r4:00000000 <4>[ 2.442727] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.451242] r7:c1032810 r6:c0f1f86c r5:00000000 r4:c470e210 <4>[ 2.457170] [] (really_probe) from [] (driver_probe_device+0x194/0x1bc) <4>[ 2.465786] r10:00000003 r9:00000000 r8:c15a0a10 r7:c470e210 r6:c46bfc6c r5:c0f1f86c <4>[ 2.473876] r4:c470e210 <4>[ 2.476673] [] (driver_probe_device) from [] (__device_attach_driver+0xb8/0xf8) <4>[ 2.485981] r8:c15a0a10 r7:c470e210 r6:c46bfc6c r5:c0f1f86c r4:00000001 <4>[ 2.492956] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.501991] r7:c470e254 r6:c051ff54 r5:c46bfc6c r4:00000000 <4>[ 2.507921] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.516446] r6:c470e210 r5:00000001 r4:c470e210 <4>[ 2.521322] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.530108] r7:00000000 r6:c470e210 r5:c0f25710 r4:c470e210 <4>[ 2.536037] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.544914] [] (bus_probe_device) from [] (device_add+0x600/0x72c) <4>[ 2.553092] r7:00000000 r6:c0f253f8 r5:00000000 r4:c470e210 <4>[ 2.559012] [] (device_add) from [] (platform_device_add+0x190/0x1f8) <4>[ 2.567454] r9:c0e0b448 r8:c0e0b428 r7:c15a0a00 r6:00000000 r5:00000000 r4:c470e200 <4>[ 2.575464] [] (platform_device_add) from [] (platform_device_register_full+0xf0/0x124) <4>[ 2.585466] r9:c1032818 r8:00000001 r7:c15a0a00 r6:c46bfd58 r5:00000000 r4:c470e200 <4>[ 2.593483] [] (platform_device_register_full) from [] (rpi_firmware_probe+0x1a4/0x1ec) <4>[ 2.603487] r7:c15a0a00 r6:c15a0a10 r5:c470c640 r4:00000000 <4>[ 2.609407] [] (rpi_firmware_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.618282] r8:00000000 r7:c1032810 r6:c0f37a8c r5:c15a0a10 r4:00000000 <4>[ 2.625251] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.633778] r7:c1032810 r6:c0f37a8c r5:00000000 r4:c15a0a10 <4>[ 2.639695] [] (really_probe) from [] (driver_probe_device+0x194/0x1bc) <4>[ 2.648312] r10:c0f25664 r9:00000000 r8:00000000 r7:c15a0a10 r6:c46bfea4 r5:c0f37a8c <4>[ 2.656398] r4:c15a0a10 <4>[ 2.659195] [] (driver_probe_device) from [] (__device_attach_driver+0xb8/0xf8) <4>[ 2.668502] r8:00000000 r7:c15a0a10 r6:c46bfea4 r5:c0f37a8c r4:00000001 <4>[ 2.675472] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.684521] r7:c15a0a54 r6:c051ff54 r5:c46bfea4 r4:00000000 <4>[ 2.690441] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.698965] r6:c15a0a10 r5:00000001 r4:c15a0a10 <4>[ 2.703854] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.712644] r7:eb9c7300 r6:c15a0a10 r5:c0f25710 r4:c15a0a10 <4>[ 2.718561] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.727437] [] (bus_probe_device) from [] (deferred_probe_work_func+0xa8/0xcc) <4>[ 2.736657] r7:eb9c7300 r6:c0f25688 r5:c0f2564c r4:c15a0a10 <4>[ 2.742588] [] (deferred_probe_work_func) from [] (process_one_work+0x194/0x274) <4>[ 2.751969] r7:eb9c7300 r6:c0e0d188 r5:c0f25660 r4:c46a7c80 <4>[ 2.757897] [] (process_one_work) from [] (worker_thread+0x220/0x2e0) <4>[ 2.766339] r10:c46ab860 r9:c0f90ac0 r8:c0e0d19c r7:c0edcaa0 r6:c0e0d188 r5:c46a7c94 <4>[ 2.774425] r4:c46a7c80 <4>[ 2.777226] [] (worker_thread) from [] (kthread+0x11c/0x128) <4>[ 2.784888] r9:c1537e98 r8:c46a7c80 r7:c0134f34 r6:c46be000 r5:c46a5d80 r4:c46ab840 <4>[ 2.792900] [] (kthread) from [] (ret_from_fork+0x14/0x2c) <4>[ 2.800372] Exception stack(0xc46bffb0 to 0xc46bfff8) <4>[ 2.805689] ffa0: 00000000 00000000 00000000 00000000 <4>[ 2.814129] ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 <4>[ 2.822574] ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 <4>[ 2.829443] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0139ab8 <4>[ 2.837531] r4:c46a5d80 r3:00000001 <4>[ 2.841361] ---[ end trace 58996bc4bee07164 ]--- <6>[ 2.846281] sdhost-bcm2835 3f202000.mmc: loaded - DMA enabled (>1) <4>[ 2.855310] dwc2 3f980000.usb: supply vusb_d not found, using dummy regulator <4>[ 2.862964] dwc2 3f980000.usb: supply vusb_a not found, using dummy regulator <6>[ 2.923135] dwc2 3f980000.usb: DWC OTG Controller <6>[ 2.928133] dwc2 3f980000.usb: new USB bus registered, assigned bus number 1 <6>[ 2.935688] dwc2 3f980000.usb: irq 33, io mem 0x3f980000 <6>[ 2.942457] hub 1-0:1.0: USB hub found <6>[ 2.946543] hub 1-0:1.0: 1 port detected <4>[ 2.953960] OF: fdt: not creating '/sys/firmware/fdt': CRC check failed <4>[ 2.989832] mmc0: host does not support reading read-only switch, assuming write-enable <6>[ 3.000428] mmc0: new high speed SDHC card at address 0002 <6>[ 3.007259] mmcblk0: mmc0:0002 NCard 14.9 GiB <6>[ 3.014842] mmcblk0: p1 <6>[ 3.292397] usb 1-1: new high-speed USB device number 2 using dwc2 <6>[ 3.543466] hub 1-1:1.0: USB hub found <6>[ 3.547584] hub 1-1:1.0: 5 ports detected <6>[ 3.872410] usb 1-1.1: new high-speed USB device number 3 using dwc2 <6>[ 4.005596] smsc95xx v2.0.0 <6>[ 4.165911] SMSC LAN8700 usb-001:003:01: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=usb-001:003:01, irq=POLL) <6>[ 4.178320] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:d2:0e:1f <6>[ 4.246576] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup <6>[ 4.263890] smsc95xx 1-1.1:1.0 eth0: Link is Down <6>[ 4.282392] usb 1-1.3: new high-speed USB device number 4 using dwc2 <6>[ 4.418534] usb-storage 1-1.3:1.0: USB Mass Storage device detected <6>[ 4.426153] scsi host0: usb-storage 1-1.3:1.0 <5>[ 5.541992] scsi 0:0:0:0: Direct-Access Kingston DT 101 G2 PMAP PQ: 0 ANSI: 0 CCS <5>[ 5.852407] random: crng init done <5>[ 6.486160] sd 0:0:0:0: [sda] 7669824 512-byte logical blocks: (3.93 GB/3.66 GiB) <5>[ 6.494379] sd 0:0:0:0: [sda] Write Protect is off <3>[ 6.499875] sd 0:0:0:0: [sda] No Caching mode page found <3>[ 6.505504] sd 0:0:0:0: [sda] Assuming drive cache: write through <6>[ 6.544708] sda: sda1 sda2 <5>[ 6.551774] sd 0:0:0:0: [sda] Attached SCSI removable disk <6>[ 7.383939] smsc95xx 1-1.1:1.0 eth0: Link is Up - 100Mbps/Full - flow control off <6>[ 7.402441] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 7.432581] Sending DHCP requests ., OK <6>[ 7.476492] IP-Config: Got DHCP answer from 192.168.201.1, my address is 192.168.201.14 <6>[ 7.484777] IP-Config: Complete: <6>[ 7.488286] device=eth0, hwaddr=b8:27:eb:d2:0e:1f, ipaddr=192.168.201.14, mask=255.255.255.0, gw=192.168.201.1 <6>[ 7.499002] host=bcm2836-rpi-2-b-cbg-0, domain=lava-rack, nis-domain=(none) <6>[ 7.506693] bootserver=192.168.201.1, rootserver=192.168.201.1, rootpath= <6>[ 7.506700] nameserver0=192.168.201.1 <5>[ 7.518965] cfg80211: Loading compiled-in X.509 certificates for regulatory database <5>[ 7.548774] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' <5>[ 7.558490] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' <4>[ 7.567121] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 <6>[ 7.576092] clk: Disabling unused clocks <6>[ 7.580569] ALSA device list: <6>[ 7.583835] cfg80211: failed to load regulatory.db <6>[ 7.589054] No soundcards found. <6>[ 7.593093] uart-pl011 3f201000.serial: no DMA platform data <6>[ 7.605798] Freeing unused kernel memory: 1024K <6>[ 7.610945] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 7.844266] udevd[93]: starting version 3.2.9 <27>[ 7.863308] udevd[93]: specified user 'tss' unknown <27>[ 7.868842] udevd[93]: specified group 'tss' unknown <30>[ 7.880226] udevd[94]: starting eudev-3.2.9 <4>[ 8.235892] vchiq: module is from the staging directory, the quality is unknown, you have been warned. <6>[ 8.289112] bcm2835-rng 3f104000.rng: hwrng registered <3>[ 8.376711] bcm2835_vchiq 3f00b840.mailbox: failed to set channelbase <6>[ 8.383595] vchiq: could not load vchiq done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-14191979/environment . /lava-14191979/environment / # /lava-14191979/bin/lava-test-runner /lava-14191979/0 /lava-14191979/bin/lava-test-runner /lava-14191979/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-14191979/0/tests/0_dmesg + cat uuid + UUID=14191979_1.5.<8>[ 9.679164] 2.4.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 9.744710] <8>[ 9.804434] <8>[ 9.864661] + set +x <8>[ 9.875714] / #