Trying 192.168.1.205... Connected to ts5. Escape character is '^]'. ser2net port telnet,2000 device serialdev,/dev/ttyUSB-lf-bbb-01,115200n81,local [] (Debian GNU/Linux) U-Boot SPL 2021.10-nethacked-for-LAVA_hws@denx.de-dirty (Oct 19 2021 - 19:02:35 +0200) Trying to boot from MMC2 U-Boot 2021.10-nethacked-for-LAVA_hws@denx.de-dirty (Oct 19 2021 - 19:02:35 +0200) CPU : AM335X-GP rev 2.1 Model: TI AM335x BeagleBone Black DRAM: 512 MiB WDT: Started with servicing (60s timeout) NAND: 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from FAT... not set. Validating first E-fuse MAC Net: eth2: ethernet@4a100000, eth3: usb_ether Hit any key to stop autoboot: 2  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp link up on port 0, speed 100, full duplex BOOTP broadcast 1 DHCP client bound to address 172.16.3.205 (72 ms) => setenv serverip 172.16.3.3 setenv serverip 172.16.3.3 => tftp 0x82000000 1204829/tftp-deploy-5vu9ysyh/kernel/zImage tftp 0x82000000 1204829/tftp-deploy-5vu9ysyh/kernel/zImage link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 172.16.3.3; our IP address is 172.16.3.205 Filename '1204829/tftp-deploy-5vu9ysyh/kernel/zImage'. Load address: 0x82000000 Loading: *################################################## 4.4 MiB 4 MiB/s done Bytes transferred = 4644608 (46df00 hex) => tftp 0x83000000 1204829/tftp-deploy-5vu9ysyh/ramdisk/ramdisk.cpio.gz.uboot tftp 0x83000000 1204829/tftp-deploy-5vu9ysyh/ramdisk/ramdisk.cpio.gz.uboot link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 172.16.3.3; our IP address is 172.16.3.205 Filename '1204829/tftp-deploy-5vu9ysyh/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x83000000 Loading: *################################################## 10.4 MiB 4.3 MiB/s done Bytes transferred = 10913952 (a688a0 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x88000000 1204829/tftp-deploy-5vu9ysyh/dtb/am335x-boneblack.dtb tftp 0x88000000 1204829/tftp-deploy-5vu9ysyh/dtb/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 172.16.3.3; our IP address is 172.16.3.205 Filename '1204829/tftp-deploy-5vu9ysyh/dtb/am335x-boneblack.dtb'. Load address: 0x88000000 Loading: *################################################## 61.4 KiB 3.5 MiB/s done Bytes transferred = 62861 (f58d hex) => setenv bootargs 'console=ttyO0,115200n8 root=/dev/nfs rw nfsroot=172.16.3.3:/var/lib/lava/dispatcher/tmp/1204829/extract-nfsrootfs-qsf6np6l,tcp,hard,v3 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttyO0,115200n8 root=/dev/nfs rw nfsroot=172.16.3.3:/var/lib/lava/dispatcher/tmp/1204829/extract-nfsrootfs-qsf6np6l,tcp,hard,v3 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' => bootz 0x82000000 0x83000000 0x88000000 bootz 0x82000000 0x83000000 0x88000000 Kernel image @ 0x82000000 [ 0x000000 - 0x46df00 ] ## Loading init Ramdisk from Legacy Image at 83000000 ... Image Name: Created: 2024-10-10 0:21:02 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 10913888 Bytes = 10.4 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Using Device Tree in place at 88000000, end 8801258c Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.226-cip53 (KernelCI@build-j339415-arm-gcc-12-omap2plus-defconfig-mpwvt) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Wed Oct 9 23:59:54 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black [ 0.000000] earlycon: omap8250 at MMIO 0x44e09000 (options '') [ 0.000000] printk: bootconsole [omap8250] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 16 MiB at 0x9e800000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.1 (sgx neon) [ 0.000000] percpu: Embedded 20 pages/cpu s49740 r8192 d23988 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129412 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/nfs rw nfsroot=172.16.3.3:/var/lib/lava/dispatcher/tmp/1204829/extract-nfsrootfs-qsf6np6l,tcp,hard,v3 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) <6>[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off <6>[ 0.000000] Memory: 474180K/522240K available (10240K kernel code, 1028K rwdata, 2176K rodata, 1024K init, 282K bss, 31676K reserved, 16384K cma-reserved, 0K highmem) <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts <6>[ 0.000000] TI gptimer clocksource: always-on /ocp/interconnect@44c00000/segment@200000/target-module@31000 <6>[ 0.000011] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns <6>[ 0.008344] clocksource: dmtimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns <6>[ 0.018567] TI gptimer clockevent: 24000000 Hz at /ocp/interconnect@48000000/segment@0/target-module@40000 <6>[ 0.030214] Console: colour dummy device 80x30 <3>[ 0.035087] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' <3>[ 0.042146] This ensures that you still see kernel messages. Please <3>[ 0.048872] update your kernel commandline. <6>[ 0.053472] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) <6>[ 0.095542] CPU: Testing write buffer coherency: ok <6>[ 0.100927] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.106392] pid_max: default: 32768 minimum: 301 <6>[ 0.111561] LSM: Security Framework initializing <6>[ 0.116661] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.124478] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.134155] CPU0: thread -1, cpu 0, socket -1, mpidr 0 <6>[ 0.140662] Setting up static identity map for 0x80100000 - 0x80100078 <6>[ 0.147864] rcu: Hierarchical SRCU implementation. <6>[ 0.153647] smp: Bringing up secondary CPUs ... <6>[ 0.158584] smp: Brought up 1 node, 1 CPU <6>[ 0.163008] SMP: Total of 1 processors activated (996.14 BogoMIPS). <6>[ 0.169738] CPU: All CPU(s) started in SVC mode. <6>[ 0.175464] devtmpfs: initialized <6>[ 0.191219] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 <6>[ 0.199756] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.210196] futex hash table entries: 256 (order: 2, 16384 bytes, linear) <6>[ 0.218663] pinctrl core: initialized pinctrl subsystem <6>[ 0.226330] NET: Registered protocol family 16 <6>[ 0.233935] DMA: preallocated 256 KiB pool for atomic coherent allocations <3>[ 0.260402] l3-aon-clkctrl:0000:0: failed to disable <6>[ 0.266484] audit: initializing netlink subsys (disabled) <6>[ 0.273560] thermal_sys: Registered thermal governor 'fair_share' <6>[ 0.273575] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.280182] thermal_sys: Registered thermal governor 'user_space' <6>[ 0.286896] cpuidle: using governor menu <5>[ 1.638013] audit: type=2000 audit(0.230:1): state=initialized audit_enabled=0 res=1 <6>[ 1.824309] No ATAGs? <6>[ 1.826936] hw-breakpoint: debug architecture 0x4 unsupported. <6>[ 1.856855] Kprobes globally optimized <6>[ 1.870060] iommu: Default domain type: Translated <6>[ 1.877089] vgaarb: loaded <5>[ 1.880794] SCSI subsystem initialized <6>[ 1.886095] pps_core: LinuxPPS API ver. 1 registered <6>[ 1.891579] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 1.901305] PTP clock support registered <6>[ 1.906877] clocksource: Switched to clocksource dmtimer <5>[ 2.537445] VFS: Disk quotas dquot_6.6.0 <6>[ 2.541865] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) <6>[ 2.558706] NET: Registered protocol family 2 <6>[ 2.563774] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 2.572481] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) <6>[ 2.581463] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) <6>[ 2.589762] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) <6>[ 2.597442] TCP: Hash tables configured (established 4096 bind 4096) <6>[ 2.604362] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 2.611394] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 2.619019] NET: Registered protocol family 1 <6>[ 2.624773] RPC: Registered named UNIX socket transport module. <6>[ 2.631232] RPC: Registered udp transport module. <6>[ 2.636340] RPC: Registered tcp transport module. <6>[ 2.641466] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 2.648395] PCI: CLS 0 bytes, default 64 <6>[ 2.653411] Trying to unpack rootfs image as initramfs... <6>[ 3.354002] Freeing initrd memory: 10660K <6>[ 3.359757] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available <5>[ 3.370199] Initialise system trusted keyrings <6>[ 3.375586] workingset: timestamp_bits=14 max_order=17 bucket_order=3 <5>[ 3.383874] NFS: Registering the id_resolver key type <5>[ 3.389489] Key type id_resolver registered <5>[ 3.394062] Key type id_legacy registered <6>[ 3.398554] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. <5>[ 3.406562] Key type asymmetric registered <5>[ 3.411111] Asymmetric key parser 'x509' registered <6>[ 3.416415] io scheduler mq-deadline registered <6>[ 3.421366] io scheduler kyber registered <3>[ 3.627807] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.636434] omap_gpio 44e07000.gpio: Could not register gpio chip -517 <4>[ 3.796174] ti-sysc: probe of 44e31000.target-module failed with error -16 <4>[ 3.853737] ti-sysc: probe of 48040000.target-module failed with error -16 <3>[ 3.956417] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.965121] omap_gpio 4804c000.gpio: Could not register gpio chip -517 <3>[ 4.049183] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 4.057867] omap_gpio 481ac000.gpio: Could not register gpio chip -517 <3>[ 4.080020] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 4.088696] omap_gpio 481ae000.gpio: Could not register gpio chip -517 <3>[ 4.175789] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present! <6>[ 4.184359] edma 49000000.dma: TI EDMA DMA engine driver <6>[ 4.212853] pinctrl-single 44e10800.pinmux: 142 pins, size 568 <6>[ 4.227767] Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled <6>[ 4.238825] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 20, base_baud = 3000000) is a 8250 <6>[ 4.248239] printk: console [ttyS0] enabled <6>[ 4.248239] printk: console [ttyS0] enabled <6>[ 4.257308] printk: bootconsole [omap8250] disabled <6>[ 4.257308] printk: bootconsole [omap8250] disabled <6>[ 4.281307] brd: module loaded <6>[ 4.292095] loop: module loaded <3>[ 4.297787] mtdoops: mtd device (mtddev=name/number) must be supplied <6>[ 4.366854] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000 <6>[ 4.395997] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 <6>[ 4.405937] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4 <6>[ 4.412649] cpsw 4a100000.ethernet: ALE Table size 1024 <6>[ 4.418443] cpsw 4a100000.ethernet: cpts: overflow check period 500 (jiffies) <6>[ 4.425954] cpsw 4a100000.ethernet: Detected MACID = 34:03:de:5e:2c:05 <6>[ 4.434985] i2c /dev entries driver <5>[ 4.440665] cpuidle: enable-method property 'ti,am3352' found operations <6>[ 4.448598] sdhci: Secure Digital Host Controller Interface driver <6>[ 4.455075] sdhci: Copyright(c) Pierre Ossman <6>[ 4.460493] sdhci-pltfm: SDHCI platform and OF driver helper <4>[ 4.468811] sdhci-omap 481d8000.mmc: supply vqmmc not found, using dummy regulator <6>[ 4.478738] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 4.487274] Initializing XFRM netlink socket <6>[ 4.492059] NET: Registered protocol family 10 <6>[ 4.498586] Segment Routing with IPv6 <6>[ 4.502632] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 4.509726] NET: Registered protocol family 17 <6>[ 4.514490] NET: Registered protocol family 15 <5>[ 4.519432] Key type dns_resolver registered <6>[ 4.524577] oprofile: using arm/armv7 <6>[ 4.528717] ThumbEE CPU extension supported. <5>[ 4.533287] Registering SWP/SWPB emulation handler <3>[ 4.538794] omap_voltage_late_init: Voltage driver support not added <3>[ 4.545459] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize <3>[ 4.553903] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize <6>[ 4.562607] SmartReflex Class3 initialized <6>[ 4.567438] mmc1: SDHCI controller on 481d8000.mmc [481d8000.mmc] using External DMA <5>[ 4.576296] Loading compiled-in X.509 certificates <6>[ 4.601276] OMAP GPIO hardware version 0.1 <4>[ 4.637551] tps65217-pmic: Failed to locate of_node [id: -1] <4>[ 4.651201] tps65217-bl: Failed to locate of_node [id: -1] <6>[ 4.660078] tps65217 0-0024: TPS65217 ID 0xe version 1.2 <6>[ 4.666473] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz <6>[ 4.676569] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz <6>[ 4.688014] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22) <6>[ 4.697135] sdhci-omap 48060000.mmc: Got CD GPIO <4>[ 4.702306] sdhci-omap 48060000.mmc: supply vqmmc not found, using dummy regulator <6>[ 4.712702] mmc1: new high speed MMC card at address 0001 <6>[ 4.719658] mmcblk1: mmc1:0001 M62704 3.56 GiB <6>[ 4.724888] mmcblk1boot0: mmc1:0001 M62704 partition 1 2.00 MiB <6>[ 4.731668] mmcblk1boot1: mmc1:0001 M62704 partition 2 2.00 MiB <6>[ 4.739167] mmcblk1rpmb: mmc1:0001 M62704 partition 3 512 KiB, chardev (249:0) <6>[ 4.749499] mmcblk1: p1 <6>[ 4.773333] mmc0: SDHCI controller on 48060000.mmc [48060000.mmc] using External DMA <6>[ 4.783019] cpsw 4a100000.ethernet: initializing cpsw version 1.12 (0) <6>[ 4.868401] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL) <6>[ 7.007518] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off <6>[ 7.016856] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 7.047000] Sending DHCP requests ., OK <6>[ 7.130967] IP-Config: Got DHCP answer from 172.16.3.3, my address is 172.16.3.205 <6>[ 7.138870] IP-Config: Complete: <6>[ 7.142380] device=eth0, hwaddr=34:03:de:5e:2c:05, ipaddr=172.16.3.205, mask=255.255.255.0, gw=172.16.3.3 <6>[ 7.152708] host=172.16.3.205, domain=denx.de, nis-domain=(none) <6>[ 7.159457] bootserver=172.16.3.33, rootserver=172.16.3.3, rootpath= <6>[ 7.159464] nameserver0=172.16.3.3 <6>[ 7.170674] ntpserver0=172.16.3.3 <6>[ 7.175196] clk: Disabling unused clocks <6>[ 7.181731] Freeing unused kernel memory: 1024K <6>[ 7.197378] Run /init as init process Loading, please wait... Starting systemd-udevd version 252.12-1~deb12u1 <4>[ 8.484955] at24 0-0050: supply vcc not found, using dummy regulator <3>[ 8.539348] wkup_m3_ipc 44e11324.wkup_m3_ipc: IPC Request for A8->M3 Channel failed! -517 <4>[ 8.639306] tps6521x_pwrbutton tps65217-pwrbutton: DMA mask not set <6>[ 8.663019] remoteproc remoteproc0: wkup_m3 is available <6>[ 8.708033] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write <4>[ 8.715568] at24 2-0054: supply vcc not found, using dummy regulator <4>[ 8.725741] am335x-phy-driver 47401300.usb-phy: supply vcc not found, using dummy regulator <6>[ 8.737036] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec <6>[ 8.777780] omap_rtc 44e3e000.rtc: registered as rtc0 <6>[ 8.783221] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01T00:00:00 UTC (946684800) <6>[ 8.793421] input: tps65217_pwrbutton as /devices/platform/ocp/44c00000.interconnect/44c00000.interconnect:segment@200000/44e0b000.target-module/44e0b000.i2c/i2c-0/0-0024/tps65217-pwrbutton/input/input0 <6>[ 8.845314] usbcore: registered new interface driver usbfs <6>[ 8.851341] usbcore: registered new interface driver hub <6>[ 8.857070] usbcore: registered new device driver usb <4>[ 8.897570] at24 2-0055: supply vcc not found, using dummy regulator <4>[ 8.942341] at24 2-0056: supply vcc not found, using dummy regulator <4>[ 9.006701] at24 2-0057: supply vcc not found, using dummy regulator <3>[ 9.022616] wkup_m3_ipc 44e11324.wkup_m3_ipc: IPC Request for A8->M3 Channel failed! -517 <6>[ 9.034909] tda998x 0-0070: found TDA19988 <3>[ 9.132213] wkup_m3_ipc 44e11324.wkup_m3_ipc: IPC Request for A8->M3 Channel failed! -517 <6>[ 9.241588] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 <3>[ 9.362574] davinci-mcasp 48038000.mcasp: IRQ common not found <6>[ 9.519360] omap_rng 48310000.rng: Random Number Generator ver. 20 <5>[ 9.526556] random: crng init done <6>[ 9.637550] remoteproc remoteproc0: powering up wkup_m3 <4>[ 9.643268] remoteproc remoteproc0: Direct firmware load for am335x-pm-firmware.elf failed with error -2 <3>[ 9.653158] remoteproc remoteproc0: request_firmware failed: -2 <3>[ 9.659402] wkup_m3_ipc 44e11324.wkup_m3_ipc: rproc_boot failed <4>[ 9.788503] am335x-phy-driver 47401b00.usb-phy: supply vcc not found, using dummy regulator <6>[ 9.865757] musb-hdrc musb-hdrc.1: MUSB HDRC host driver <6>[ 9.871619] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 9.897162] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 <3>[ 9.914538] PM: Cannot get wkup_m3_ipc handle <6>[ 9.925360] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 <6>[ 9.993985] tilcdc 4830e000.lcdc: bound 0-0070 (ops tda998x_driver_exit [tda998x]) <6>[ 10.033267] [drm] Initialized tilcdc 1.0.0 20121205 for 4830e000.lcdc on minor 0 <6>[ 10.049753] omap-aes 53500000.aes: will run requests pump with realtime priority <6>[ 10.057946] omap-sham 53100000.sham: will run requests pump with realtime priority <6>[ 10.138793] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes <6>[ 10.152003] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 <6>[ 10.160726] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 10.168278] usb usb1: Product: MUSB HDRC host driver <6>[ 10.173529] usb usb1: Manufacturer: Linux 5.10.226-cip53 musb-hcd <6>[ 10.179933] usb usb1: SerialNumber: musb-hdrc.1 <6>[ 10.205045] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes <6>[ 10.411733] hub 1-0:1.0: USB hub found <6>[ 10.436578] hub 1-0:1.0: 1 port detected <3>[ 10.479681] PM: Cannot get wkup_m3_ipc handle <3>[ 10.548372] PM: Cannot get wkup_m3_ipc handle <3>[ 10.590418] PM: Cannot get wkup_m3_ipc handle Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/nfs-top ... done. Begin: Running /scripts/nfs-premount ... done. Begin: Waiting up to 180 secs for any network device to become available ... done. IP-Config: eth0 hardware address 34:03:de:5e:2c:05 mtu 1500 DHCP IP-Config: eth0 complete (dhcp from 172.16.3.3): address: 172.16.3.205 broadcast: 172.16.3.255 netmask: 255.255.255.0 gateway: 172.16.3.3 dns0 : 172.16.3.3 dns1 : 0.0.0.0 domain : denx.de rootserver: 172.16.3.33 rootpath: filename : this-host-is-not-configured.kpxe done. Begin: Running /scripts/nfs-bottom ... done. Begin: Running /scripts/init-bottom ... mount: No such file or directory mount: invalid option -- done. mount: No such file or directory run-init: opening console: No such file or directory Target filesystem doesn't have requested /sbin/init. run-init: opening console: No such file or directory run-init: opening console: No such file or directory run-init: opening console: No such file or directory run-init: opening console: No such file or directory run-init: opening console: No such file or directory No init found. Try passing init= bootarg. (initramfs) <3>[ 69.647567] PM: Cannot get wkup_m3_ipc handle <6>[ 69.652464] platform pm33xx: deferred probe pending