[Enter `^Ec?' for help] U-Boot SPL 2015.10-00025-g943d444 (Feb 19 2016 - 15:04:45) U-Boot 2015.10-00025-g943d444 (Feb 19 2016 - 15:04:45 +0000) Model: Radxa Rock 2 Square DRAM: 2 GiB MMC: dwmmc@ff0c0000: 0, dwmmc@ff0f0000: 1 *** Warning - bad CRC, using default environment In: serial@ff690000 Out: serial@ff690000 Err: serial@ff690000 Incorrect eeprom header Net: Warning: ethernet@ff290000 (eth0) using random MAC address - 4a:25:f8:cd:b3:50 eth0: ethernet@ff290000 Hit any key to stop autoboot: 1  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp ethernet@ff290000 Waiting for PHY auto negotiation to complete...... done Speed: 1000, full duplex BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.201.186 (261 ms) => setenv serverip 192.168.201.1 setenv serverip 192.168.201.1 => tftp 0x2000000 10597557/tftp-deploy-xoj8sf8c/kernel/zImage tftp 0x2000000 10597557/tftp-deploy-xoj8sf8c/kernel/zImage Speed: 1000, full duplex Using ethernet@ff290000 device TFTP from server 192.168.201.1; our IP address is 192.168.201.186 Filename '10597557/tftp-deploy-xoj8sf8c/kernel/zImage'. Load address: 0x2000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ####################################################### 3.4 MiB/s done Bytes transferred = 10347008 (9de200 hex) => tftp 0x4000000 10597557/tftp-deploy-xoj8sf8c/ramdisk/ramdisk.cpio.gz.uboot tftp 0x4000000 10597557/tftp-deploy-xoj8sf8c/ramdisk/ramdisk.cpio.gz.uboot Speed: 1000, full duplex Using ethernet@ff290000 device TFTP from server 192.168.201.1; our IP address is 192.168.201.186 Filename '10597557/tftp-deploy-xoj8sf8c/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x4000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################ 3.6 MiB/s done Bytes transferred = 17153245 (105bcdd hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x1f00000 10597557/tftp-deploy-xoj8sf8c/dtb/rk3288-rock2-square.dtb tftp 0x1f00000 10597557/tftp-deploy-xoj8sf8c/dtb/rk3288-rock2-square.dtb Speed: 1000, full duplex Using ethernet@ff290000 device TFTP from server 192.168.201.1; our IP address is 192.168.201.186 Filename '10597557/tftp-deploy-xoj8sf8c/dtb/rk3288-rock2-square.dtb'. Load address: 0x1f00000 Loading: *### 2.5 MiB/s done Bytes transferred = 41716 (a2f4 hex) => setenv bootargs 'console=ttyS2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' setenv bootargs 'console=ttyS2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' => bootz 0x2000000 0x4000000 0x1f00000 bootz 0x2000000 0x4000000 0x1f00000 Kernel image @ 0x2000000 [ 0x000000 - 0x9de200 ] ## Loading init Ramdisk from Legacy Image at 04000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 17153181 Bytes = 16.4 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 01f00000 Booting using the fdt blob at 0x1f00000 Using Device Tree in place at 01f00000, end 01f0d2f3 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x500 [ 0.000000] Linux version 6.1.31 (KernelCI@build-j1612487-arm-gcc-10-multi-v7-defconfig-fnxk5) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Mon Jun 5 22:26:17 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Radxa Rock 2 Square [ 0.000000] earlycon: uart0 at MMIO32 0xff690000 (options '115200n8') [ 0.000000] printk: bootconsole [uart0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000030000000-0x000000007fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] percpu: Embedded 16 pages/cpu s34580 r8192 d22764 u65536 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752 [ 0.000000] Kernel command line: console=ttyS2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 1970776K/2097152K available (14336K kernel code, 2468K rwdata, 6008K rodata, 2048K init, 429K bss, 60840K reserved, 65536K cma-reserved, 1245184K highmem) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 <6>[ 0.000000] trace event string verifier disabled <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). <6>[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns <6>[ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns <6>[ 0.009082] Switching to timer-based delay loop, resolution 41ns <6>[ 0.023282] Console: colour dummy device 80x30 <6>[ 0.028498] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) <6>[ 0.040172] pid_max: default: 32768 minimum: 301 <6>[ 0.045714] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.054056] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.063498] CPU: Testing write buffer coherency: ok <6>[ 0.069228] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.075357] CPU0: thread -1, cpu 0, socket 5, mpidr 80000500 <6>[ 0.082970] Setting up static identity map for 0x300000 - 0x3000ac <6>[ 0.092106] rcu: Hierarchical SRCU implementation. <6>[ 0.097653] rcu: Max phase no-delay instances is 1000. <6>[ 0.108523] EFI services will not be available. <6>[ 0.114153] smp: Bringing up secondary CPUs ... <6>[ 0.121239] CPU1: thread -1, cpu 1, socket 5, mpidr 80000501 <6>[ 0.121260] CPU1: Spectre v2: using BPIALL workaround <6>[ 0.135571] CPU2: thread -1, cpu 2, socket 5, mpidr 80000502 <6>[ 0.135591] CPU2: Spectre v2: using BPIALL workaround <6>[ 0.149830] CPU3: thread -1, cpu 3, socket 5, mpidr 80000503 <6>[ 0.149849] CPU3: Spectre v2: using BPIALL workaround <6>[ 0.162302] smp: Brought up 1 node, 4 CPUs <6>[ 0.167119] SMP: Total of 4 processors activated (192.00 BogoMIPS). <6>[ 0.174289] CPU: All CPU(s) started in SVC mode. <6>[ 0.180286] devtmpfs: initialized <6>[ 0.193841] VFP support v0.3: implementor 41 architecture 3 part 30 variant d rev 0 <6>[ 0.202803] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.213921] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) <6>[ 0.223752] pinctrl core: initialized pinctrl subsystem <6>[ 0.233645] DMI not present or invalid. <6>[ 0.238986] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.248152] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.259001] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.259071] cpuidle: using governor menu <6>[ 0.271215] No ATAGs? <6>[ 0.274137] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. <6>[ 0.283243] hw-breakpoint: maximum watchpoint size is 4 bytes. <6>[ 0.293412] Serial: AMBA PL011 UART driver <6>[ 0.322085] platform ff940000.vop: Fixed dependency cycle(s) with /hdmi@ff980000 <6>[ 0.330607] platform ff930000.vop: Fixed dependency cycle(s) with /hdmi@ff980000 <6>[ 0.355472] rockchip-gpio ff750000.gpio: probed /pinctrl/gpio@ff750000 <6>[ 0.363709] rockchip-gpio ff780000.gpio: probed /pinctrl/gpio@ff780000 <6>[ 0.371869] rockchip-gpio ff790000.gpio: probed /pinctrl/gpio@ff790000 <6>[ 0.380065] rockchip-gpio ff7a0000.gpio: probed /pinctrl/gpio@ff7a0000 <6>[ 0.388314] rockchip-gpio ff7b0000.gpio: probed /pinctrl/gpio@ff7b0000 <6>[ 0.396518] rockchip-gpio ff7c0000.gpio: probed /pinctrl/gpio@ff7c0000 <6>[ 0.404676] rockchip-gpio ff7d0000.gpio: probed /pinctrl/gpio@ff7d0000 <6>[ 0.412889] rockchip-gpio ff7e0000.gpio: probed /pinctrl/gpio@ff7e0000 <6>[ 0.421046] rockchip-gpio ff7f0000.gpio: probed /pinctrl/gpio@ff7f0000 <6>[ 0.459585] iommu: Default domain type: Translated <6>[ 0.465232] iommu: DMA domain TLB invalidation policy: strict mode <5>[ 0.473316] SCSI subsystem initialized <6>[ 0.478231] usbcore: registered new interface driver usbfs <6>[ 0.484644] usbcore: registered new interface driver hub <6>[ 0.490804] usbcore: registered new device driver usb <6>[ 0.499288] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.505025] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.515375] PTP clock support registered <6>[ 0.520233] EDAC MC: Ver: 3.0.0 <6>[ 0.527711] vgaarb: loaded <6>[ 2.075230] clocksource: Switched to clocksource arch_sys_counter <6>[ 2.093827] NET: Registered PF_INET protocol family <6>[ 2.099768] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 2.110638] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) <6>[ 2.120155] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 2.128983] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 2.137876] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) <6>[ 2.146472] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 2.153829] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 2.161451] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 2.169709] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 2.176767] RPC: Registered named UNIX socket transport module. <6>[ 2.183557] RPC: Registered udp transport module. <6>[ 2.189039] RPC: Registered tcp transport module. <6>[ 2.194488] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 2.201865] PCI: CLS 0 bytes, default 64 <6>[ 2.206917] Trying to unpack rootfs image as initramfs... <6>[ 2.214165] hw perfevents: enabled with armv7_cortex_a12 PMU driver, 7 counters available <5>[ 2.225341] Initialise system trusted keyrings <6>[ 2.230833] workingset: timestamp_bits=30 max_order=19 bucket_order=0 <6>[ 2.245303] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 2.252822] NFS: Registering the id_resolver key type <5>[ 2.258736] Key type id_resolver registered <5>[ 2.263617] Key type id_legacy registered <6>[ 2.268457] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 2.276129] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <6>[ 2.284586] ntfs: driver 2.1.32 [Flags: R/O]. <5>[ 2.290258] Key type asymmetric registered <5>[ 2.295048] Asymmetric key parser 'x509' registered <6>[ 2.300912] bounce: pool size: 64 pages <6>[ 2.305561] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) <6>[ 2.313971] io scheduler mq-deadline registered <6>[ 2.319248] io scheduler kyber registered <6>[ 2.379717] dma-pl330 ff250000.dma-controller: Loaded driver for PL330 DMAC-241330 <6>[ 2.388363] dma-pl330 ff250000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16 <6>[ 2.399977] dma-pl330 ffb20000.dma-controller: Loaded driver for PL330 DMAC-241330 <6>[ 2.408623] dma-pl330 ffb20000.dma-controller: DBUFF-64x8bytes Num_Chans-5 Num_Peri-6 Num_Events-10 <6>[ 2.502614] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled <6>[ 2.513272] printk: console [ttyS2] disabled <6>[ 2.518347] ff690000.serial: ttyS2 at MMIO 0xff690000 (irq = 47, base_baud = 1500000) is a 16550A <6>[ 2.528564] printk: console [ttyS2] enabled <6>[ 2.528564] printk: console [ttyS2] enabled <6>[ 2.538535] printk: bootconsole [uart0] disabled <6>[ 2.538535] printk: bootconsole [uart0] disabled <6>[ 2.553152] SuperH (H)SCI(F) driver initialized <6>[ 2.560308] msm_serial: driver initialized <6>[ 2.565218] STMicroelectronics ASC driver initialized <6>[ 2.573033] STM32 USART driver initialized <6>[ 2.604231] brd: module loaded <6>[ 2.615013] loop: module loaded <6>[ 2.637117] CAN device driver interface <6>[ 2.643729] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded <6>[ 2.652404] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 2.658270] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 2.665272] igb: Intel(R) Gigabit Ethernet Network Driver <6>[ 2.671603] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 2.686212] pegasus: Pegasus/Pegasus II USB Ethernet driver <6>[ 2.692793] usbcore: registered new interface driver pegasus <6>[ 2.699498] usbcore: registered new interface driver asix <6>[ 2.705908] usbcore: registered new interface driver ax88179_178a <6>[ 2.713062] usbcore: registered new interface driver cdc_ether <6>[ 2.719952] usbcore: registered new interface driver smsc75xx <6>[ 2.726745] usbcore: registered new interface driver smsc95xx <6>[ 2.733506] usbcore: registered new interface driver net1080 <6>[ 2.740202] usbcore: registered new interface driver cdc_subset <6>[ 2.747172] usbcore: registered new interface driver zaurus <6>[ 2.753784] usbcore: registered new interface driver cdc_ncm <4>[ 2.763893] dwc2 ff540000.usb: supply vusb_d not found, using dummy regulator <4>[ 2.772382] dwc2 ff540000.usb: supply vusb_a not found, using dummy regulator <6>[ 2.845993] dwc2 ff540000.usb: DWC OTG Controller <6>[ 2.851583] dwc2 ff540000.usb: new USB bus registered, assigned bus number 1 <6>[ 2.859842] dwc2 ff540000.usb: irq 51, io mem 0xff540000 <6>[ 2.867054] hub 1-0:1.0: USB hub found <6>[ 2.871591] hub 1-0:1.0: 1 port detected <4>[ 2.877093] dwc2 ff580000.usb: supply vusb_d not found, using dummy regulator <4>[ 2.885552] dwc2 ff580000.usb: supply vusb_a not found, using dummy regulator <6>[ 3.045254] dwc2 ff580000.usb: EPs: 10, dedicated fifos, 972 entries in SPRAM <6>[ 3.056195] dwc2 ff580000.usb: DWC OTG Controller <6>[ 3.061786] dwc2 ff580000.usb: new USB bus registered, assigned bus number 2 <6>[ 3.070034] dwc2 ff580000.usb: irq 52, io mem 0xff580000 <6>[ 3.077135] hub 2-0:1.0: USB hub found <6>[ 3.081662] hub 2-0:1.0: 1 port detected <6>[ 3.091939] usbcore: registered new interface driver usb-storage <6>[ 3.105568] ehci-platform ff500000.usb: EHCI Host Controller <6>[ 3.107960] i2c_dev: i2c /dev entries driver <6>[ 3.112227] ehci-platform ff500000.usb: new USB bus registered, assigned bus number 3 <6>[ 3.129947] ehci-platform ff500000.usb: irq 53, io mem 0xff500000 <6>[ 3.132712] VDD_LOG: Bringing 1100000uV into 1000000-1000000uV <6>[ 3.165227] ehci-platform ff500000.usb: USB 2.0 started, EHCI 1.00 <6>[ 3.169727] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected! <6>[ 3.173251] hub 3-0:1.0: USB hub found <6>[ 3.184985] hub 3-0:1.0: 1 port detected <6>[ 3.185100] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected! <4>[ 3.220273] dw_wdt ff800000.watchdog: No valid TOPs array specified <6>[ 3.238721] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 500000 KHz, changing to: 600000 KHz <6>[ 3.254145] sdhci: Secure Digital Host Controller Interface driver <6>[ 3.261384] sdhci: Copyright(c) Pierre Ossman <6>[ 3.269327] Synopsys Designware Multimedia Card Interface Driver <6>[ 3.277083] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 3.277584] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 3.293981] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 3.301704] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 3.308272] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 3.319629] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 3.327620] usbcore: registered new interface driver usbhid <6>[ 3.334139] usbhid: USB HID core driver <6>[ 3.342189] NET: Registered PF_INET6 protocol family <6>[ 3.348626] Segment Routing with IPv6 <6>[ 3.353036] In-situ OAM (IOAM) with IPv6 <6>[ 3.357770] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 3.364984] NET: Registered PF_PACKET protocol family <6>[ 3.370949] can: controller area network core <6>[ 3.376157] NET: Registered PF_CAN protocol family <6>[ 3.381804] can: raw protocol <6>[ 3.385416] can: broadcast manager protocol <6>[ 3.390385] can: netlink gateway - max_hops=1 <5>[ 3.395765] Key type dns_resolver registered <6>[ 3.400877] ThumbEE CPU extension supported. <5>[ 3.405956] Registering SWP/SWPB emulation handler <5>[ 3.411947] Loading compiled-in X.509 certificates <6>[ 3.438727] rk_gmac-dwmac ff290000.ethernet: IRQ eth_lpi not found <6>[ 3.446012] rk_gmac-dwmac ff290000.ethernet: PTP uses main clock <6>[ 3.453605] rk_gmac-dwmac ff290000.ethernet: clock input or output? (input). <6>[ 3.457085] Freeing initrd memory: 16752K <6>[ 3.461800] rk_gmac-dwmac ff290000.ethernet: TX delay(0x30). <6>[ 3.473138] rk_gmac-dwmac ff290000.ethernet: RX delay(0x10). <6>[ 3.479765] rk_gmac-dwmac ff290000.ethernet: integrated PHY? (no). <6>[ 3.486977] rk_gmac-dwmac ff290000.ethernet: clock input from PHY <6>[ 3.499080] rk_gmac-dwmac ff290000.ethernet: init for RGMII <6>[ 3.505648] usb 3-1: new high-speed USB device number 2 using ehci-platform <6>[ 3.513814] rk_gmac-dwmac ff290000.ethernet: User ID: 0x10, Synopsys ID: 0x35 <6>[ 3.522097] rk_gmac-dwmac ff290000.ethernet: DWMAC1000 <6>[ 3.528232] rk_gmac-dwmac ff290000.ethernet: DMA HW capability register supported <6>[ 3.536888] rk_gmac-dwmac ff290000.ethernet: RX Checksum Offload Engine supported <6>[ 3.545543] rk_gmac-dwmac ff290000.ethernet: COE Type 2 <6>[ 3.551668] rk_gmac-dwmac ff290000.ethernet: TX Checksum insertion supported <6>[ 3.559838] rk_gmac-dwmac ff290000.ethernet: Wake-Up On Lan supported <6>[ 3.567360] rk_gmac-dwmac ff290000.ethernet: Normal descriptors <6>[ 3.574262] rk_gmac-dwmac ff290000.ethernet: Ring mode enabled <6>[ 3.581071] rk_gmac-dwmac ff290000.ethernet: Enable RX Mitigation via HW Watchdog Timer <6>[ 3.590317] rk_gmac-dwmac ff290000.ethernet: device MAC address b6:47:69:80:d6:4f <6>[ 3.738876] RTL8211E Gigabit Ethernet stmmac-0:00: attached PHY driver (mii_bus:phy_addr=stmmac-0:00, irq=POLL) <6>[ 3.750477] RTL8211E Gigabit Ethernet stmmac-0:01: attached PHY driver (mii_bus:phy_addr=stmmac-0:01, irq=POLL) <6>[ 3.766359] dwmmc_rockchip ff0c0000.mmc: IDMAC supports 32-bit address mode. <6>[ 3.767706] dwmmc_rockchip ff0f0000.mmc: IDMAC supports 32-bit address mode. <6>[ 3.768821] input: gpio-keys as /devices/platform/gpio-keys/input/input0 <6>[ 3.771269] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 3.798725] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 3.806418] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 3.812943] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 3.824035] dwmmc_rockchip ff0c0000.mmc: Using internal DMA controller. <6>[ 3.825917] hub 3-1:1.0: USB hub found <6>[ 3.831729] dwmmc_rockchip ff0c0000.mmc: Version ID is 270a <6>[ 3.836488] hub 3-1:1.0: 4 ports detected <6>[ 3.842725] dwmmc_rockchip ff0c0000.mmc: DW MMC controller at irq 62,32 bit host data width,256 deep fifo <6>[ 3.851422] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 3.858624] dwmmc_rockchip ff0f0000.mmc: Using internal DMA controller. <6>[ 3.872676] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) <6>[ 3.874313] dwmmc_rockchip ff0f0000.mmc: Version ID is 270a <6>[ 3.891437] dwmmc_rockchip ff0f0000.mmc: DW MMC controller at irq 63,32 bit host data width,256 deep fifo <6>[ 3.902532] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 3.903078] dwmmc_rockchip ff0f0000.mmc: allocated mmc-pwrseq <6>[ 3.910235] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 3.916937] mmc_host mmc1: card is non-removable. <6>[ 3.923453] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 3.942061] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) <6>[ 3.943657] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 3.961163] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 3.968876] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 3.975417] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 3.991989] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 3.992177] rk_gmac-dwmac ff290000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0 <6>[ 4.009971] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 4.010906] rk_gmac-dwmac ff290000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211E Gigabit Ethernet] (irq=POLL) <6>[ 4.017664] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 4.017680] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 4.035152] rk_gmac-dwmac ff290000.ethernet eth0: No Safety Features support found <6>[ 4.055702] rk_gmac-dwmac ff290000.ethernet eth0: PTP not supported by HW <6>[ 4.063839] rk_gmac-dwmac ff290000.ethernet eth0: configuring for phy/rgmii link mode <6>[ 4.087297] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) <6>[ 4.099585] mmc1: new high speed MMC card at address 0001 <6>[ 4.106582] mmcblk1: mmc1:0001 032GE4 29.1 GiB <6>[ 4.115990] mmcblk1: p1 p2 <6>[ 4.119815] mmcblk1boot0: mmc1:0001 032GE4 4.00 MiB <6>[ 4.126587] mmcblk1boot1: mmc1:0001 032GE4 4.00 MiB <6>[ 4.133195] mmcblk1rpmb: mmc1:0001 032GE4 4.00 MiB, chardev (236:0) <6>[ 4.143305] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 4.151747] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 4.159459] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 4.166000] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 7.166528] rk_gmac-dwmac ff290000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off <6>[ 7.176473] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 7.215177] Sending DHCP requests .., OK <6>[ 12.580192] IP-Config: Got DHCP answer from 192.168.201.1, my address is 192.168.201.134 <6>[ 12.589713] IP-Config: Complete: <6>[ 12.593652] device=eth0, hwaddr=b6:47:69:80:d6:4f, ipaddr=192.168.201.134, mask=255.255.255.0, gw=192.168.201.1 <6>[ 12.606082] host=192.168.201.134, domain=lava-rack, nis-domain=(none) <6>[ 12.614170] bootserver=192.168.201.1, rootserver=192.168.201.1, rootpath= <6>[ 12.614219] nameserver0=192.168.201.1 <4>[ 12.631192] dw-apb-uart ff690000.serial: forbid DMA for kernel console <6>[ 12.644312] Freeing unused kernel image (initmem) memory: 2048K <6>[ 12.665635] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 12.738015] udevd[115]: starting version 3.2.9 <5>[ 12.744242] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 12.752363] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 12.760393] random: udevd: uninitialized urandom read (16 bytes read) <27>[ 12.772515] udevd[115]: specified user 'tss' unknown <27>[ 12.778566] udevd[115]: specified group 'tss' unknown <30>[ 12.785792] udevd[116]: starting eudev-3.2.9 <6>[ 12.957811] rockchip-vop ff930000.vop: Adding to iommu group 0 <6>[ 12.965409] rockchip-vop ff940000.vop: Adding to iommu group 1 <6>[ 12.967990] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 12.985331] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 12.993029] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 12.999577] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 13.081645] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 13.090021] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 13.097739] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 13.104276] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <4>[ 13.111228] rtc-hym8563 0-0051: no valid clock/calendar values available <6>[ 13.152380] rtc-hym8563 0-0051: registered as rtc0 <6>[ 13.153642] rockchip-drm display-subsystem: bound ff930000.vop (ops vop_component_ops [rockchipdrm]) <4>[ 13.169721] rtc-hym8563 0-0051: no valid clock/calendar values available <6>[ 13.171821] panfrost ffa30000.gpu: clock rate = 400000000 <6>[ 13.171858] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <3>[ 13.177528] rtc-hym8563 0-0051: hctosys: unable to read the hardware clock <6>[ 13.181595] rockchip-drm display-subsystem: bound ff940000.vop (ops vop_component_ops [rockchipdrm]) <4>[ 13.181685] dwhdmi-rockchip ff980000.hdmi: supply avdd-0v9 not found, using dummy regulator <4>[ 13.181773] dwhdmi-rockchip ff980000.hdmi: supply avdd-1v8 not found, using dummy regulator <6>[ 13.181854] dwhdmi-rockchip ff980000.hdmi: Detected HDMI TX controller v2.00a with HDCP (DWC MHL PHY) <6>[ 13.184593] rockchip-drm display-subsystem: bound ff980000.hdmi (ops dw_hdmi_rockchip_ops [rockchipdrm]) <6>[ 13.251468] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 13.259188] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 13.265745] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 13.278609] panfrost ffa30000.gpu: mali-t760 id 0x750 major 0x0 minor 0x0 status 0x1 <6>[ 13.285682] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0 <6>[ 13.287608] panfrost ffa30000.gpu: features: 00000000,00000407, issues: 00000000,24040400 <6>[ 13.296751] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes <6>[ 13.306156] panfrost ffa30000.gpu: Features: L2:0x07120206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7 <6>[ 13.314841] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes <6>[ 13.328135] panfrost ffa30000.gpu: shader_present=0xf l2_present=0x1 <6>[ 13.336606] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes <6>[ 13.354934] dwmmc_rockchip ff0d0000.mmc: allocated mmc-pwrseq <6>[ 13.361666] mmc_host mmc2: card is non-removable. <6>[ 13.362608] [drm] Initialized panfrost 1.2.0 20180908 for ffa30000.gpu on minor 1 <6>[ 13.390816] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) <6>[ 13.436820] rk3288-crypto ff8a0000.crypto: will run requests pump with realtime priority <6>[ 13.465646] rk3288-crypto ff8a0000.crypto: Crypto Accelerator successfully registered <6>[ 13.526184] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) <6>[ 13.538969] mmc2: new high speed SDIO card at address 0001 <5>[ 13.625791] cfg80211: Loading compiled-in X.509 certificates for regulatory database <5>[ 13.670178] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' <4>[ 13.677996] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 <6>[ 13.687940] cfg80211: failed to load regulatory.db <6>[ 13.694564] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4339-sdio for chip BCM4339/2 <4>[ 13.704494] brcmfmac mmc2:0001:1: Direct firmware load for brcm/brcmfmac4339-sdio.radxa,rock2-square.bin failed with error -2 <4>[ 13.717473] brcmfmac mmc2:0001:1: Direct firmware load for brcm/brcmfmac4339-sdio.bin failed with error -2 done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: <5>[ 13.781234] random: dropbear: uninitialized urandom read (32 bytes read) OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-10597557/environment . /lava-10597557/environment / # /lava-10597557/bin/lava-test-runner /lava-10597557/0 /lava-10597557/bin/lava-test-runner /lava-10597557/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-10597557/0/tests/0_dmesg + cat uuid + UUID=10597557_1<8>[ 14.364012] .5.2.4.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 14.395094] <8>[ 14.422201] <8>[ 14.447145] + set +x <8>[ 14.457475] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-10597557/environment / # <3>[ 14.738027] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50 . /lava-10597557/environment/lava-10597557/bin/lava-test-runner /lava-10597557/1 / # /lava-10597557/bin/lava-test-runner /lava-10597557/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-10597557/1/tests/1_boot<8>[ 14.950068] rr + cat uuid + UUID=10597557_1.5.2.4.5 + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-10597557/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-10597557/1/../bin/lava-test-case <8>[ 14.989265] /lava-10597557/1/../bin/lava-test-case <8>[ 15.016867] /lava-10597557/1/../bin/lava-test-case <8>[ 15.033372] /lava-10597557/1/../bin/lava-test-case <8>[ 15.061586] /lava-10597557/1/../bin/lava-test-case <8>[ 15.085099] /lava-10597557/1/../bin/lava-test-case <8>[ 15.107796] /lava-10597557/1/../bin/lava-test-case <8>[ 15.132270] /lava-10597557/1/../bin/lava-test-case <8>[ 15.157856] /lava-10597557/1/../bin/lava-test-case <8>[ 15.181582] + set +x <8>[ 15.190767] / #