connecting to NetworkSerialPort(target=Target(name='imx6qp-wandboard-revd1-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4009, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4009 connected to 10.8.254.5 (port 4009) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2020.05.0-00156-g60b1a02e5a-dirty #28 Sat Jun 27 00:22:32 CEST 2020 Board: Technexion EDM1-CF-IMX6 Quad Plus with PMIC and fairy baseboard detected i.MX6 Quad Plus revision 2.0 i.MX reset reason POR (SRSR: 0x00000001) i.MX6 Quad Plus unique ID: e1fdfca7020b09d4 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2190000.usdhc@2190000.of: registered as mmc0 imx-esdhc 2194000.usdhc@2194000.of: registered as mmc1 imx-esdhc 2198000.usdhc@2198000.of: registered as mmc2 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-ipuv3 2800000.ipu@2800000.of: IPUv3H probed imx-ldb ldb.of: Neither display timings in ldb node nor remote panel found netconsole: registered as netconsole-1 malloc space: 0x4fe7a7c0 -> 0x8fcf4f7f (size 1022.5 MiB) [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/978290/tftp-deploy-a9mp0yzv/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/978290/tftp-deploy-a9mp0yzv/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/978290/tftp-deploy-a9mp0yzv/kernel/zImage [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/978290/tftp-deploy-a9mp0yzv/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/978290/tftp-deploy-a9mp0yzv/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/978290/tftp-deploy-a9mp0yzv/kernel/zImage eth0: 1000Mbps full duplex link detected [33mWARNING:[0m eth0: No MAC address set. Using random address ea:98:d1:b4:7a:08 T eth0: DHCP client bound to address 10.8.254.242 Loading ARM Linux zImage '/mnt/tftp/978290/tftp-deploy-a9mp0yzv/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x1377c000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/978290/tftp-deploy-a9mp0yzv/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x189fc866 Loading devicetree from '/mnt/tftp/978290/tftp-deploy-a9mp0yzv/dtb/imx6qp-wandboard-revd1.dtb' commandline: console=ttymxc0,115200n8 Starting kernel at 0x1377c000, initrd at 0x18000000, oftree at 0x189fd000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.1.31 (KernelCI@build-j40539-arm-gcc-10-imx-v6-v7-defconfig-d5bb8) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Thu Jun 15 11:24:33 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wandboard i.MX6 QuadPlus Board revD1 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0x8a000000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000010000000-0x000000003fffffff] [ 0.000000] HighMem [mem 0x0000000040000000-0x000000008fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000010000000-0x000000008fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000008fffffff] [ 0.000000] percpu: Embedded 17 pages/cpu s38388 r8192 d23052 u69632 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752 [ 0.000000] Kernel command line: console=ttymxc0,115200n8 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1971288K/2097152K available (15360K kernel code, 2191K rwdata, 5092K rodata, 1024K init, 6673K bss, 60328K reserved, 65536K cma-reserved, 1244144K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] Running RCU self tests [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU lockdep checking is enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76470001 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000001] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000023] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.002125] Console: colour dummy device 80x30 [ 0.002198] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.002209] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.002218] ... MAX_LOCK_DEPTH: 48 [ 0.002229] ... MAX_LOCKDEP_KEYS: 8192 [ 0.002238] ... CLASSHASH_SIZE: 4096 [ 0.002247] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.002256] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.002266] ... CHAINHASH_SIZE: 32768 [ 0.002275] memory used by lock dependency info: 4061 kB [ 0.002285] memory used for stack traces: 2112 kB [ 0.002295] per task-struct memory footprint: 1536 bytes [ 0.002403] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.002432] pid_max: default: 32768 minimum: 301 [ 0.003069] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.003105] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.007087] CPU: Testing write buffer coherency: ok [ 0.007272] CPU0: Spectre v2: using BPIALL workaround [ 0.008674] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.012057] cblist_init_generic: Setting adjustable number of callback queues. [ 0.012165] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.012533] Running RCU-tasks wait API self tests [ 0.012856] Setting up static identity map for 0x10100000 - 0x10100078 [ 0.013498] Callback from call_rcu_tasks_trace() invoked. [ 0.013750] rcu: Hierarchical SRCU implementation. [ 0.013762] rcu: Max phase no-delay instances is 1000. [ 0.016598] smp: Bringing up secondary CPUs ... [ 0.019906] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.019928] CPU1: Spectre v2: using BPIALL workaround [ 0.023350] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.023373] CPU2: Spectre v2: using BPIALL workaround [ 0.026029] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.026049] CPU3: Spectre v2: using BPIALL workaround [ 0.026479] smp: Brought up 1 node, 4 CPUs [ 0.026501] SMP: Total of 4 processors activated (24.00 BogoMIPS). [ 0.026519] CPU: All CPU(s) started in SVC mode. [ 0.029377] devtmpfs: initialized [ 0.065397] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.067701] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.067768] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.072058] pinctrl core: initialized pinctrl subsystem [ 0.078274] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.100962] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.105947] thermal_sys: Registered thermal governor 'step_wise' [ 0.106287] cpuidle: using governor menu [ 0.106546] CPU identified as i.MX6QP, silicon rev 1.0 [ 0.128075] platform 120000.hdmi: Fixed dependency cycle(s) with /soc/ipu@2800000 [ 0.128389] platform 120000.hdmi: Fixed dependency cycle(s) with /soc/ipu@2400000 [ 0.181788] platform 21dc000.mipi: Fixed dependency cycle(s) with /soc/bus@2100000/i2c@21a4000/camera@3c [ 0.203632] No ATAGs? [ 0.204141] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.204186] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.209323] imx6q-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver [ 0.254014] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.321778] SCSI subsystem initialized [ 0.323589] usbcore: registered new interface driver usbfs [ 0.323824] usbcore: registered new interface driver hub [ 0.323977] usbcore: registered new device driver usb [ 0.324344] usb_phy_generic usbphynop1: supply vcc not found, using dummy regulator [ 0.325149] usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests [ 0.325616] usb_phy_generic usbphynop2: supply vcc not found, using dummy regulator [ 0.326496] usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests [ 0.330601] i2c i2c-0: IMX I2C adapter registered [ 0.336155] i2c i2c-1: IMX I2C adapter registered [ 0.341394] i2c i2c-2: IMX I2C adapter registered [ 0.342000] mc: Linux media interface: v0.10 [ 0.342224] videodev: Linux video capture interface: v2.00 [ 0.342801] pps_core: LinuxPPS API ver. 1 registered [ 0.342816] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.342873] PTP clock support registered [ 0.345521] Advanced Linux Sound Architecture Driver Initialized. [ 0.351452] Bluetooth: Core ver 2.22 [ 0.351577] NET: Registered PF_BLUETOOTH protocol family [ 0.351593] Bluetooth: HCI device and connection manager initialized [ 0.351705] Bluetooth: HCI socket layer initialized [ 0.351737] Bluetooth: L2CAP socket layer initialized [ 0.351893] Bluetooth: SCO socket layer initialized [ 0.354768] vgaarb: loaded [ 1.399404] clocksource: Switched to clocksource mxc_timer1 [ 1.411739] VFS: Disk quotas dquot_6.6.0 [ 1.411908] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.446687] NET: Registered PF_INET protocol family [ 1.447737] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.451131] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 20480 bytes, linear) [ 1.451253] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.451748] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.452070] TCP bind hash table entries: 8192 (order: 7, 655360 bytes, linear) [ 1.454456] TCP: Hash tables configured (established 8192 bind 8192) [ 1.455113] UDP hash table entries: 512 (order: 3, 49152 bytes, linear) [ 1.455338] UDP-Lite hash table entries: 512 (order: 3, 49152 bytes, linear) [ 1.455997] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.458258] RPC: Registered named UNIX socket transport module. [ 1.458306] RPC: Registered udp transport module. [ 1.458320] RPC: Registered tcp transport module. [ 1.458333] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.460168] PCI: CLS 0 bytes, default 64 [ 1.461889] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. [ 1.463019] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 1.463117] Trying to unpack rootfs image as initramfs... [ 1.470607] Initialise system trusted keyrings [ 1.471697] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 1.496209] NFS: Registering the id_resolver key type [ 1.496408] Key type id_resolver registered [ 1.496454] Key type id_legacy registered [ 1.496774] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.496879] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.497088] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 1.498447] fuse: init (API version 7.37) [ 1.594867] Key type asymmetric registered [ 1.595045] Asymmetric key parser 'x509' registered [ 1.595746] bounce: pool size: 64 pages [ 1.596216] io scheduler mq-deadline registered [ 1.596240] io scheduler kyber registered [ 1.616942] mxs-dma 110000.dma-apbh: initialized [ 1.632376] pfuze100-regulator 2-0008: Full layer: 2, Metal layer: 1 [ 1.633326] pfuze100-regulator 2-0008: FAB: 0, FIN: 0 [ 1.633347] pfuze100-regulator 2-0008: pfuze100 found. [ 1.668870] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 268, base_baud = 5000000) is a IMX [ 2.616396] printk: console [ttymxc0] enabled [ 2.625268] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 269, base_baud = 5000000) is a IMX [ 2.649927] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with HDCP (DWC HDMI 3D TX PHY) [ 2.688662] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops) [ 2.695428] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops) [ 2.702067] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops) [ 2.707796] etnaviv-gpu 130000.gpu: model: GC3000, revision: 5450 [ 2.716299] etnaviv-gpu 134000.gpu: model: GC320, revision: 5303 [ 2.722639] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1216 [ 2.728768] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 [ 2.738182] [drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor 0 [ 2.758936] imx-ipuv3 2400000.ipu: IPUv3H probed [ 2.771345] Stack Depot allocating hash table of 65536 entries with kvcalloc [ 2.779654] Freeing initrd memory: 10228K [ 2.783927] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_crtc_ops) [ 2.792067] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_crtc_ops) [ 2.800278] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops ipu_crtc_ops) [ 2.808134] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops ipu_crtc_ops) [ 2.816733] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops) [ 2.827824] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1 [ 2.837832] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 2.846157] imx-ipuv3 2800000.ipu: IPUv3H probed [ 2.888574] brd: module loaded [ 2.922616] loop: module loaded [ 2.928656] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024 [ 2.936711] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480 [ 2.944789] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000 [ 2.953044] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 [ 2.961029] ahci-imx 2200000.sata: supply ahci not found, using dummy regulator [ 2.969049] ahci-imx 2200000.sata: supply phy not found, using dummy regulator [ 2.976726] ahci-imx 2200000.sata: supply target not found, using dummy regulator [ 2.988018] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled [ 2.995117] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 3.003988] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 3.018088] scsi host0: ahci-imx [ 3.023136] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 282 [ 3.044363] CAN device driver interface [ 3.056337] pps pps0: new PPS source ptp0 [ 3.106516] fec 2188000.ethernet eth0: registered PHC device 0 [ 3.114908] usbcore: registered new interface driver r8152 [ 3.120596] usbcore: registered new interface driver lan78xx [ 3.126420] usbcore: registered new interface driver asix [ 3.132127] usbcore: registered new interface driver ax88179_178a [ 3.138364] usbcore: registered new interface driver cdc_ether [ 3.144522] usbcore: registered new interface driver smsc95xx [ 3.150465] usbcore: registered new interface driver net1080 [ 3.156247] usbcore: registered new interface driver cdc_subset [ 3.162336] usbcore: registered new interface driver zaurus [ 3.168036] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 3.175696] usbcore: registered new interface driver cdc_ncm [ 3.181528] usbcore: registered new interface driver r8153_ecm [ 3.187652] usbcore: registered new interface driver usb-storage [ 3.203026] SPI driver ads7846 has no spi_device_id for ti,tsc2046 [ 3.209234] SPI driver ads7846 has no spi_device_id for ti,ads7843 [ 3.215509] SPI driver ads7846 has no spi_device_id for ti,ads7845 [ 3.221759] SPI driver ads7846 has no spi_device_id for ti,ads7873 [ 3.240103] snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc0 [ 3.246421] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01T00:00:00 UTC (0) [ 3.256036] i2c_dev: i2c /dev entries driver [ 3.275455] Bluetooth: HCI UART driver ver 2.3 [ 3.280017] Bluetooth: HCI UART protocol H4 registered [ 3.285261] Bluetooth: HCI UART protocol LL registered [ 3.293805] sdhci: Secure Digital Host Controller Interface driver [ 3.300069] sdhci: Copyright(c) Pierre Ossman [ 3.304449] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.313727] sdhci-esdhc-imx 2190000.mmc: Got CD GPIO [ 3.315008] caam 2100000.crypto: Entropy delay = 3200 [ 3.320583] sdhci-esdhc-imx 2198000.mmc: Got CD GPIO [ 3.362192] ata1: SATA link down (SStatus 0 SControl 300) [ 3.367780] mmc1: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA [ 3.368033] ahci-imx 2200000.sata: no device found, disabling link. [ 3.376370] mmc2: SDHCI controller on 2198000.mmc [2198000.mmc] using ADMA [ 3.381074] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug [ 3.384746] caam 2100000.crypto: Instantiated RNG4 SH0 [ 3.389186] mmc0: SDHCI controller on 2190000.mmc [2190000.mmc] using ADMA [ 3.442553] mmc0: host does not support reading read-only switch, assuming write-enable [ 3.445509] caam 2100000.crypto: Instantiated RNG4 SH1 [ 3.453206] mmc0: new high speed SDHC card at address 1234 [ 3.455947] caam 2100000.crypto: device ID = 0x0a16010000000000 (Era 4) [ 3.465722] mmcblk0: mmc0:1234 SA04G 3.64 GiB [ 3.468109] caam 2100000.crypto: job rings = 2, qi = 0 [ 3.487248] caam algorithms registered in /proc/crypto [ 3.493208] caam 2100000.crypto: registering rng-caam [ 3.515363] mmc2: new DDR MMC card at address 0001 [ 3.522879] mmcblk2: mmc2:0001 S10004 3.56 GiB [ 3.536318] mmcblk2: p1 p2 [ 3.543620] mmcblk2boot0: mmc2:0001 S10004 4.00 MiB [ 3.557244] mmcblk2boot1: mmc2:0001 S10004 4.00 MiB [ 3.569419] mmcblk2rpmb: mmc2:0001 S10004 4.00 MiB, chardev (243:0) [ 3.628145] random: crng init done [ 3.628732] caam 2100000.crypto: rng crypto API alg registered prng-caam [ 3.643036] usbcore: registered new interface driver usbhid [ 3.648638] usbhid: USB HID core driver [ 3.657143] imx-ipuv3-csi imx-ipuv3-csi.0: Registered ipu1_csi0 capture as /dev/video0 [ 3.666881] imx-ipuv3 2400000.ipu: Registered ipu1_ic_prpenc capture as /dev/video1 [ 3.675530] imx-ipuv3 2400000.ipu: Registered ipu1_ic_prpvf capture as /dev/video2 [ 3.684400] imx-ipuv3-csi imx-ipuv3-csi.1: Registered ipu1_csi1 capture as /dev/video3 [ 3.693515] imx-ipuv3-csi imx-ipuv3-csi.4: Registered ipu2_csi0 capture as /dev/video4 [ 3.702192] imx-ipuv3 2800000.ipu: Registered ipu2_ic_prpenc capture as /dev/video5 [ 3.710669] imx-ipuv3 2800000.ipu: Registered ipu2_ic_prpvf capture as /dev/video6 [ 3.719453] imx-ipuv3-csi imx-ipuv3-csi.5: Registered ipu2_csi1 capture as /dev/video7 [ 3.728554] imx6-mipi-csi2 21dc000.mipi: Consider updating driver imx6-mipi-csi2 to match on endpoints [ 3.760504] sgtl5000 1-000a: sgtl5000 revision 0x11 [ 3.771381] sgtl5000 1-000a: Using internal LDO instead of VDDD: check ER1 erratum [ 3.827815] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 3.846814] NET: Registered PF_INET6 protocol family [ 3.857060] Segment Routing with IPv6 [ 3.860903] In-situ OAM (IOAM) with IPv6 [ 3.865007] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.873679] NET: Registered PF_PACKET protocol family [ 3.878762] can: controller area network core [ 3.883424] NET: Registered PF_CAN protocol family [ 3.888250] can: raw protocol [ 3.891454] can: broadcast manager protocol [ 3.895697] can: netlink gateway - max_hops=1 [ 3.900636] Key type dns_resolver registered [ 3.919858] Registering SWP/SWPB emulation handler [ 3.925577] Loading compiled-in X.509 certificates [ 4.110565] imx_usb 2184200.usb: No over current polarity defined [ 4.121560] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 4.126995] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 4.159555] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 4.166747] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 4.175306] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.182617] usb usb1: Product: EHCI Host Controller [ 4.187519] usb usb1: Manufacturer: Linux 6.1.31 ehci_hcd [ 4.193027] usb usb1: SerialNumber: ci_hdrc.1 [ 4.202987] hub 1-0:1.0: USB hub found [ 4.207085] hub 1-0:1.0: 1 port detected [ 4.216758] video-mux 20e0000.iomuxc-gpr:ipu1_csi0_mux: Consider updating driver video-mux to match on endpoints [ 4.229821] video-mux 20e0000.iomuxc-gpr:ipu2_csi1_mux: Consider updating driver video-mux to match on endpoints [ 4.246296] imx_thermal 20c8000.anatop:tempmon: Automotive CPU temperature grade - max:125C critical:120C passive:115C [ 4.261955] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 4.278750] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 4.293987] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.360837] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.369084] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 4.373405] ALSA device list: [ 4.377978] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db [ 4.381099] No soundcards found. [ 4.396756] Freeing unused kernel image (initmem) memory: 1024K [ 4.491025] Run /init as init process [ 4.499743] usb 1-1: new high-speed USB device number 2 using ci_hdrc Starting syslogd: OK Starting klogd: [ 4.751498] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 4.01 [ 4.759974] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.767162] usb 1-1: Product: USB2.0 Hub OK[ 4.771232] usb 1-1: Manufacturer: GenesysLogic [ 4.782569] hub 1-1:1.0: USB hub found [ 4.787389] hub 1-1:1.0: 4 ports detected Running sysctl: [ 4.809877] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW OK Populating /dev using udev: [ 4.887389] udevd[221]: starting version 3.2.9 [ 4.906834] udevd[221]: specified user 'tss' unknown [ 4.912074] udevd[221]: specified group 'tss' unknown [ 4.926632] udevd[222]: starting eudev-3.2.9 [ 5.521711] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 5.571567] coda 2040000.vpu: Direct firmware load for vpu_fw_imx6q.bin failed with error -2 [ 5.580193] coda 2040000.vpu: Falling back to sysfs fallback for: vpu_fw_imx6q.bin [ 5.607297] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 5.873273] imx-sdma 20ec000.dma-controller: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 5.883876] imx-sdma 20ec000.dma-controller: Falling back to sysfs fallback for: imx/sdma/sdma-imx6q.bin [ 5.902778] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 5.911162] ov5645 1-003c: ov5645_write_reg: write reg error -6: reg=3103, val=11 [ 5.918911] ov5645 1-003c: could not set init registers [ 5.925096] ov5645 1-003c: could not power up OV5645 [ 5.995565] fsl-asoc-card sound: ASoC: driver name too long 'imx6-wandboard-sgtl5000' -> 'imx6-wandboard-' done Saving random seed: OK Starting network: OK Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-978290/environment . /lava-978290/environment / # /lava-978290/bin/lava-test-runner /lava-978290/0 /lava-978290/bin/lava-test-runner /lava-978290/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-978290/0/tests/0_dmesg + cat uuid + UUID=978290_1.5.2.3.1[ 7.359522] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 7.479122] [ 7.580385] [ 7.681961] + set +x [ 7.693107] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-978290/environment / # . /lava-978290/environment/lava-978290/bin/lava-test-runner /lava-978290/1 / # /lava-978290/bin/lava-test-runner /lava-978290/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-978290/1/tests/1_bootrr + cat uuid + UUID=978290_1.5.2.3.5[ 8.301018] + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-978290/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-978290/1/../bin/lava-test-case [ 8.457270] /lava-978290/1/../bin/lava-test-case [ 8.567912] /lava-978290/1/../bin/lava-test-case [ 8.628004] + set +x [ 8.669199] / #