[Enter `^Ec?' for help] U-Boot SPL 2015.10-00025-g943d444 (Feb 19 2016 - 15:04:45) U-Boot 2015.10-00025-g943d444 (Feb 19 2016 - 15:04:45 +0000) Model: Radxa Rock 2 Square DRAM: 2 GiB MMC: dwmmc@ff0c0000: 0, dwmmc@ff0f0000: 1 *** Warning - bad CRC, using default environment In: serial@ff690000 Out: serial@ff690000 Err: serial@ff690000 Incorrect eeprom header Net: Warning: ethernet@ff290000 (eth0) using random MAC address - 4a:25:f8:cd:b3:50 eth0: ethernet@ff290000 Hit any key to stop autoboot: 1  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp ethernet@ff290000 Waiting for PHY auto negotiation to complete...... done Speed: 1000, full duplex BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 DHCP client bound to address 192.168.201.186 (762 ms) => setenv serverip 192.168.201.1 setenv serverip 192.168.201.1 => tftp 0x2000000 10742054/tftp-deploy-i9j3qkg8/kernel/zImage tftp 0x2000000 10742054/tftp-deploy-i9j3qkg8/kernel/zImage Speed: 1000, full duplex Using ethernet@ff290000 device TFTP from server 192.168.201.1; our IP address is 192.168.201.186 Filename '10742054/tftp-deploy-i9j3qkg8/kernel/zImage'. Load address: 0x2000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ####################################################### 3.7 MiB/s done Bytes transferred = 10347008 (9de200 hex) => tftp 0x4000000 10742054/tftp-deploy-i9j3qkg8/ramdisk/ramdisk.cpio.gz.uboot tftp 0x4000000 10742054/tftp-deploy-i9j3qkg8/ramdisk/ramdisk.cpio.gz.uboot Speed: 1000, full duplex Using ethernet@ff290000 device TFTP from server 192.168.201.1; our IP address is 192.168.201.186 Filename '10742054/tftp-deploy-i9j3qkg8/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x4000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################ 3.6 MiB/s done Bytes transferred = 17152561 (105ba31 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x1f00000 10742054/tftp-deploy-i9j3qkg8/dtb/rk3288-rock2-square.dtb tftp 0x1f00000 10742054/tftp-deploy-i9j3qkg8/dtb/rk3288-rock2-square.dtb Speed: 1000, full duplex Using ethernet@ff290000 device TFTP from server 192.168.201.1; our IP address is 192.168.201.186 Filename '10742054/tftp-deploy-i9j3qkg8/dtb/rk3288-rock2-square.dtb'. Load address: 0x1f00000 Loading: *### 2.8 MiB/s done Bytes transferred = 41716 (a2f4 hex) => setenv bootargs 'console=ttyS2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' setenv bootargs 'console=ttyS2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' => bootz 0x2000000 0x4000000 0x1f00000 bootz 0x2000000 0x4000000 0x1f00000 Kernel image @ 0x2000000 [ 0x000000 - 0x9de200 ] ## Loading init Ramdisk from Legacy Image at 04000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 17152497 Bytes = 16.4 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 01f00000 Booting using the fdt blob at 0x1f00000 Using Device Tree in place at 01f00000, end 01f0d2f3 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x500 [ 0.000000] Linux version 6.1.31 (KernelCI@build-j40442-arm-gcc-10-multi-v7-defconfig-tg8qb) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Thu Jun 15 11:21:25 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Radxa Rock 2 Square [ 0.000000] earlycon: uart0 at MMIO32 0xff690000 (options '115200n8') [ 0.000000] printk: bootconsole [uart0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000030000000-0x000000007fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] percpu: Embedded 16 pages/cpu s34580 r8192 d22764 u65536 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752 [ 0.000000] Kernel command line: console=ttyS2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 1970776K/2097152K available (14336K kernel code, 2468K rwdata, 6008K rodata, 2048K init, 429K bss, 60840K reserved, 65536K cma-reserved, 1245184K highmem) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 <6>[ 0.000000] trace event string verifier disabled <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). <6>[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns <6>[ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns <6>[ 0.009083] Switching to timer-based delay loop, resolution 41ns <6>[ 0.023247] Console: colour dummy device 80x30 <6>[ 0.028464] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) <6>[ 0.040138] pid_max: default: 32768 minimum: 301 <6>[ 0.045681] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.054022] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.063461] CPU: Testing write buffer coherency: ok <6>[ 0.069189] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.075318] CPU0: thread -1, cpu 0, socket 5, mpidr 80000500 <6>[ 0.082934] Setting up static identity map for 0x300000 - 0x3000ac <6>[ 0.092061] rcu: Hierarchical SRCU implementation. <6>[ 0.097607] rcu: Max phase no-delay instances is 1000. <6>[ 0.108454] EFI services will not be available. <6>[ 0.114083] smp: Bringing up secondary CPUs ... <6>[ 0.121167] CPU1: thread -1, cpu 1, socket 5, mpidr 80000501 <6>[ 0.121186] CPU1: Spectre v2: using BPIALL workaround <6>[ 0.135496] CPU2: thread -1, cpu 2, socket 5, mpidr 80000502 <6>[ 0.135516] CPU2: Spectre v2: using BPIALL workaround <6>[ 0.149758] CPU3: thread -1, cpu 3, socket 5, mpidr 80000503 <6>[ 0.149777] CPU3: Spectre v2: using BPIALL workaround <6>[ 0.162232] smp: Brought up 1 node, 4 CPUs <6>[ 0.167049] SMP: Total of 4 processors activated (192.00 BogoMIPS). <6>[ 0.174218] CPU: All CPU(s) started in SVC mode. <6>[ 0.180220] devtmpfs: initialized <6>[ 0.193635] VFP support v0.3: implementor 41 architecture 3 part 30 variant d rev 0 <6>[ 0.202598] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.213716] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) <6>[ 0.223546] pinctrl core: initialized pinctrl subsystem <6>[ 0.233466] DMI not present or invalid. <6>[ 0.238802] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.247972] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.258813] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.258882] cpuidle: using governor menu <6>[ 0.271025] No ATAGs? <6>[ 0.273945] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. <6>[ 0.283051] hw-breakpoint: maximum watchpoint size is 4 bytes. <6>[ 0.293231] Serial: AMBA PL011 UART driver <6>[ 0.321951] platform ff940000.vop: Fixed dependency cycle(s) with /hdmi@ff980000 <6>[ 0.330472] platform ff930000.vop: Fixed dependency cycle(s) with /hdmi@ff980000 <6>[ 0.355287] rockchip-gpio ff750000.gpio: probed /pinctrl/gpio@ff750000 <6>[ 0.363514] rockchip-gpio ff780000.gpio: probed /pinctrl/gpio@ff780000 <6>[ 0.371671] rockchip-gpio ff790000.gpio: probed /pinctrl/gpio@ff790000 <6>[ 0.379869] rockchip-gpio ff7a0000.gpio: probed /pinctrl/gpio@ff7a0000 <6>[ 0.388111] rockchip-gpio ff7b0000.gpio: probed /pinctrl/gpio@ff7b0000 <6>[ 0.396317] rockchip-gpio ff7c0000.gpio: probed /pinctrl/gpio@ff7c0000 <6>[ 0.404472] rockchip-gpio ff7d0000.gpio: probed /pinctrl/gpio@ff7d0000 <6>[ 0.412684] rockchip-gpio ff7e0000.gpio: probed /pinctrl/gpio@ff7e0000 <6>[ 0.420840] rockchip-gpio ff7f0000.gpio: probed /pinctrl/gpio@ff7f0000 <6>[ 0.459730] iommu: Default domain type: Translated <6>[ 0.465377] iommu: DMA domain TLB invalidation policy: strict mode <5>[ 0.473463] SCSI subsystem initialized <6>[ 0.478370] usbcore: registered new interface driver usbfs <6>[ 0.484784] usbcore: registered new interface driver hub <6>[ 0.490946] usbcore: registered new device driver usb <6>[ 0.499436] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.505174] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.515525] PTP clock support registered <6>[ 0.520383] EDAC MC: Ver: 3.0.0 <6>[ 0.527850] vgaarb: loaded <6>[ 2.068304] clocksource: Switched to clocksource arch_sys_counter <6>[ 2.087284] NET: Registered PF_INET protocol family <6>[ 2.093249] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 2.104100] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) <6>[ 2.113625] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 2.122448] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 2.131332] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) <6>[ 2.139926] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 2.147284] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 2.154905] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 2.163161] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 2.170314] RPC: Registered named UNIX socket transport module. <6>[ 2.177104] RPC: Registered udp transport module. <6>[ 2.182597] RPC: Registered tcp transport module. <6>[ 2.188046] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 2.195436] PCI: CLS 0 bytes, default 64 <6>[ 2.200509] Trying to unpack rootfs image as initramfs... <6>[ 2.207767] hw perfevents: enabled with armv7_cortex_a12 PMU driver, 7 counters available <5>[ 2.218971] Initialise system trusted keyrings <6>[ 2.224404] workingset: timestamp_bits=30 max_order=19 bucket_order=0 <6>[ 2.239148] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 2.246664] NFS: Registering the id_resolver key type <5>[ 2.252567] Key type id_resolver registered <5>[ 2.257448] Key type id_legacy registered <6>[ 2.262285] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 2.269957] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <6>[ 2.278427] ntfs: driver 2.1.32 [Flags: R/O]. <5>[ 2.284074] Key type asymmetric registered <5>[ 2.288894] Asymmetric key parser 'x509' registered <6>[ 2.294726] bounce: pool size: 64 pages <6>[ 2.299378] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) <6>[ 2.307788] io scheduler mq-deadline registered <6>[ 2.313068] io scheduler kyber registered <6>[ 2.374194] dma-pl330 ff250000.dma-controller: Loaded driver for PL330 DMAC-241330 <6>[ 2.382850] dma-pl330 ff250000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16 <6>[ 2.395609] dma-pl330 ffb20000.dma-controller: Loaded driver for PL330 DMAC-241330 <6>[ 2.404257] dma-pl330 ffb20000.dma-controller: DBUFF-64x8bytes Num_Chans-5 Num_Peri-6 Num_Events-10 <6>[ 2.501852] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled <6>[ 2.512512] printk: console [ttyS2] disabled <6>[ 2.517563] ff690000.serial: ttyS2 at MMIO 0xff690000 (irq = 47, base_baud = 1500000) is a 16550A <6>[ 2.527801] printk: console [ttyS2] enabled <6>[ 2.527801] printk: console [ttyS2] enabled <6>[ 2.537792] printk: bootconsole [uart0] disabled <6>[ 2.537792] printk: bootconsole [uart0] disabled <6>[ 2.552434] SuperH (H)SCI(F) driver initialized <6>[ 2.559582] msm_serial: driver initialized <6>[ 2.564468] STMicroelectronics ASC driver initialized <6>[ 2.572312] STM32 USART driver initialized <6>[ 2.603444] brd: module loaded <6>[ 2.614185] loop: module loaded <6>[ 2.636273] CAN device driver interface <6>[ 2.642908] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded <6>[ 2.651604] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 2.657451] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 2.664455] igb: Intel(R) Gigabit Ethernet Network Driver <6>[ 2.670803] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 2.685390] pegasus: Pegasus/Pegasus II USB Ethernet driver <6>[ 2.691992] usbcore: registered new interface driver pegasus <6>[ 2.698693] usbcore: registered new interface driver asix <6>[ 2.705080] usbcore: registered new interface driver ax88179_178a <6>[ 2.712256] usbcore: registered new interface driver cdc_ether <6>[ 2.719147] usbcore: registered new interface driver smsc75xx <6>[ 2.725919] usbcore: registered new interface driver smsc95xx <6>[ 2.732706] usbcore: registered new interface driver net1080 <6>[ 2.739398] usbcore: registered new interface driver cdc_subset <6>[ 2.746355] usbcore: registered new interface driver zaurus <6>[ 2.752987] usbcore: registered new interface driver cdc_ncm <4>[ 2.763066] dwc2 ff540000.usb: supply vusb_d not found, using dummy regulator <4>[ 2.771556] dwc2 ff540000.usb: supply vusb_a not found, using dummy regulator <6>[ 2.848925] dwc2 ff540000.usb: DWC OTG Controller <6>[ 2.854513] dwc2 ff540000.usb: new USB bus registered, assigned bus number 1 <6>[ 2.862770] dwc2 ff540000.usb: irq 51, io mem 0xff540000 <6>[ 2.869932] hub 1-0:1.0: USB hub found <6>[ 2.874468] hub 1-0:1.0: 1 port detected <4>[ 2.879945] dwc2 ff580000.usb: supply vusb_d not found, using dummy regulator <4>[ 2.888427] dwc2 ff580000.usb: supply vusb_a not found, using dummy regulator <6>[ 3.038378] dwc2 ff580000.usb: EPs: 10, dedicated fifos, 972 entries in SPRAM <6>[ 3.048772] dwc2 ff580000.usb: DWC OTG Controller <6>[ 3.054355] dwc2 ff580000.usb: new USB bus registered, assigned bus number 2 <6>[ 3.062585] dwc2 ff580000.usb: irq 52, io mem 0xff580000 <6>[ 3.069680] hub 2-0:1.0: USB hub found <6>[ 3.074217] hub 2-0:1.0: 1 port detected <6>[ 3.084508] usbcore: registered new interface driver usb-storage <6>[ 3.098722] ehci-platform ff500000.usb: EHCI Host Controller <6>[ 3.100523] i2c_dev: i2c /dev entries driver <6>[ 3.105375] ehci-platform ff500000.usb: new USB bus registered, assigned bus number 3 <6>[ 3.122187] ehci-platform ff500000.usb: irq 53, io mem 0xff500000 <6>[ 3.125922] VDD_LOG: Bringing 1100000uV into 1000000-1000000uV <6>[ 3.158368] ehci-platform ff500000.usb: USB 2.0 started, EHCI 1.00 <6>[ 3.162142] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected! <6>[ 3.166390] hub 3-0:1.0: USB hub found <6>[ 3.178126] hub 3-0:1.0: 1 port detected <6>[ 3.178249] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected! <4>[ 3.213474] dw_wdt ff800000.watchdog: No valid TOPs array specified <6>[ 3.231953] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 500000 KHz, changing to: 600000 KHz <6>[ 3.247419] sdhci: Secure Digital Host Controller Interface driver <6>[ 3.254659] sdhci: Copyright(c) Pierre Ossman <6>[ 3.262603] Synopsys Designware Multimedia Card Interface Driver <6>[ 3.271115] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 3.272150] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 3.287988] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 3.295697] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 3.302260] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 3.313526] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 3.321558] usbcore: registered new interface driver usbhid <6>[ 3.328077] usbhid: USB HID core driver <6>[ 3.336134] NET: Registered PF_INET6 protocol family <6>[ 3.342539] Segment Routing with IPv6 <6>[ 3.346950] In-situ OAM (IOAM) with IPv6 <6>[ 3.351696] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 3.358927] NET: Registered PF_PACKET protocol family <6>[ 3.364865] can: controller area network core <6>[ 3.370073] NET: Registered PF_CAN protocol family <6>[ 3.375720] can: raw protocol <6>[ 3.379335] can: broadcast manager protocol <6>[ 3.384296] can: netlink gateway - max_hops=1 <5>[ 3.389674] Key type dns_resolver registered <6>[ 3.394788] ThumbEE CPU extension supported. <5>[ 3.399865] Registering SWP/SWPB emulation handler <5>[ 3.405852] Loading compiled-in X.509 certificates <6>[ 3.432481] rk_gmac-dwmac ff290000.ethernet: IRQ eth_lpi not found <6>[ 3.439767] rk_gmac-dwmac ff290000.ethernet: PTP uses main clock <6>[ 3.447359] rk_gmac-dwmac ff290000.ethernet: clock input or output? (input). <6>[ 3.455559] rk_gmac-dwmac ff290000.ethernet: TX delay(0x30). <6>[ 3.457801] Freeing initrd memory: 16752K <6>[ 3.462189] rk_gmac-dwmac ff290000.ethernet: RX delay(0x10). <6>[ 3.462200] rk_gmac-dwmac ff290000.ethernet: integrated PHY? (no). <6>[ 3.462225] rk_gmac-dwmac ff290000.ethernet: clock input from PHY <6>[ 3.467235] rk_gmac-dwmac ff290000.ethernet: init for RGMII <6>[ 3.494469] usb 3-1: new high-speed USB device number 2 using ehci-platform <6>[ 3.502567] rk_gmac-dwmac ff290000.ethernet: User ID: 0x10, Synopsys ID: 0x35 <6>[ 3.510855] rk_gmac-dwmac ff290000.ethernet: DWMAC1000 <6>[ 3.516981] rk_gmac-dwmac ff290000.ethernet: DMA HW capability register supported <6>[ 3.525630] rk_gmac-dwmac ff290000.ethernet: RX Checksum Offload Engine supported <6>[ 3.534286] rk_gmac-dwmac ff290000.ethernet: COE Type 2 <6>[ 3.540415] rk_gmac-dwmac ff290000.ethernet: TX Checksum insertion supported <6>[ 3.548584] rk_gmac-dwmac ff290000.ethernet: Wake-Up On Lan supported <6>[ 3.556105] rk_gmac-dwmac ff290000.ethernet: Normal descriptors <6>[ 3.563020] rk_gmac-dwmac ff290000.ethernet: Ring mode enabled <6>[ 3.569829] rk_gmac-dwmac ff290000.ethernet: Enable RX Mitigation via HW Watchdog Timer <6>[ 3.579076] rk_gmac-dwmac ff290000.ethernet: device MAC address 6a:33:3b:22:d9:0b <6>[ 3.713645] RTL8211E Gigabit Ethernet stmmac-0:00: attached PHY driver (mii_bus:phy_addr=stmmac-0:00, irq=POLL) <6>[ 3.725248] RTL8211E Gigabit Ethernet stmmac-0:01: attached PHY driver (mii_bus:phy_addr=stmmac-0:01, irq=POLL) <6>[ 3.738345] hub 3-1:1.0: USB hub found <6>[ 3.741578] dwmmc_rockchip ff0c0000.mmc: IDMAC supports 32-bit address mode. <6>[ 3.744539] hub 3-1:1.0: 4 ports detected <6>[ 3.744579] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 3.744888] input: gpio-keys as /devices/platform/gpio-keys/input/input0 <6>[ 3.751048] dwmmc_rockchip ff0f0000.mmc: IDMAC supports 32-bit address mode. <6>[ 3.755834] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 3.787593] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 3.794127] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 3.805255] dwmmc_rockchip ff0c0000.mmc: Using internal DMA controller. <6>[ 3.810115] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 3.812962] dwmmc_rockchip ff0c0000.mmc: Version ID is 270a <6>[ 3.827651] dwmmc_rockchip ff0c0000.mmc: DW MMC controller at irq 62,32 bit host data width,256 deep fifo <6>[ 3.838813] dwmmc_rockchip ff0f0000.mmc: Using internal DMA controller. <6>[ 3.846502] dwmmc_rockchip ff0f0000.mmc: Version ID is 270a <6>[ 3.853069] dwmmc_rockchip ff0f0000.mmc: DW MMC controller at irq 63,32 bit host data width,256 deep fifo <6>[ 3.864172] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 3.868213] dwmmc_rockchip ff0f0000.mmc: allocated mmc-pwrseq <6>[ 3.871884] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 3.878312] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) <6>[ 3.878620] mmc_host mmc1: card is non-removable. <6>[ 3.885132] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 3.911989] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) <6>[ 3.928083] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 3.936434] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 3.944138] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 3.950676] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 3.965692] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 3.965847] rk_gmac-dwmac ff290000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0 <6>[ 3.983670] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 3.984590] rk_gmac-dwmac ff290000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211E Gigabit Ethernet] (irq=POLL) <6>[ 3.991366] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 4.008307] rk_gmac-dwmac ff290000.ethernet eth0: No Safety Features support found <6>[ 4.009634] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 4.017053] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) <6>[ 4.017838] mmc1: new high speed MMC card at address 0001 <6>[ 4.018382] rk_gmac-dwmac ff290000.ethernet eth0: PTP not supported by HW <6>[ 4.018606] mmcblk1: mmc1:0001 032GE4 29.1 GiB <6>[ 4.032185] mmcblk1: p1 p2 <6>[ 4.063564] rk_gmac-dwmac ff290000.ethernet eth0: configuring for phy/rgmii link mode <6>[ 4.063913] mmcblk1boot0: mmc1:0001 032GE4 4.00 MiB <6>[ 4.079376] mmcblk1boot1: mmc1:0001 032GE4 4.00 MiB <6>[ 4.086006] mmcblk1rpmb: mmc1:0001 032GE4 4.00 MiB, chardev (236:0) <6>[ 4.095903] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 4.104148] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 4.111844] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 4.118384] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 7.229593] rk_gmac-dwmac ff290000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off <6>[ 7.239566] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 7.278356] Sending DHCP requests .., OK <6>[ 12.643243] IP-Config: Got DHCP answer from 192.168.201.1, my address is 192.168.201.123 <6>[ 12.652786] IP-Config: Complete: <6>[ 12.656765] device=eth0, hwaddr=6a:33:3b:22:d9:0b, ipaddr=192.168.201.123, mask=255.255.255.0, gw=192.168.201.1 <6>[ 12.669060] host=192.168.201.123, domain=lava-rack, nis-domain=(none) <6>[ 12.677148] bootserver=192.168.201.1, rootserver=192.168.201.1, rootpath= <6>[ 12.677195] nameserver0=192.168.201.1 <4>[ 12.693087] dw-apb-uart ff690000.serial: forbid DMA for kernel console <6>[ 12.702856] Freeing unused kernel image (initmem) memory: 2048K <6>[ 12.738446] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 12.838759] udevd[115]: starting version 3.2.9 <5>[ 12.844870] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 12.852866] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 12.860785] random: udevd: uninitialized urandom read (16 bytes read) <27>[ 12.872053] udevd[115]: specified user 'tss' unknown <27>[ 12.878035] udevd[115]: specified group 'tss' unknown <30>[ 12.884964] udevd[116]: starting eudev-3.2.9 <6>[ 13.071005] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 13.081240] rockchip-vop ff930000.vop: Adding to iommu group 0 <6>[ 13.088406] rockchip-vop ff940000.vop: Adding to iommu group 1 <6>[ 13.088464] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 13.102931] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 13.109474] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 13.158323] rockchip-drm display-subsystem: bound ff930000.vop (ops vop_component_ops [rockchipdrm]) <6>[ 13.212346] rockchip-drm display-subsystem: bound ff940000.vop (ops vop_component_ops [rockchipdrm]) <4>[ 13.222977] dwhdmi-rockchip ff980000.hdmi: supply avdd-0v9 not found, using dummy regulator <4>[ 13.232700] dwhdmi-rockchip ff980000.hdmi: supply avdd-1v8 not found, using dummy regulator <6>[ 13.242434] dwhdmi-rockchip ff980000.hdmi: Detected HDMI TX controller v2.00a with HDCP (DWC MHL PHY) <6>[ 13.253956] rockchip-drm display-subsystem: bound ff980000.hdmi (ops dw_hdmi_rockchip_ops [rockchipdrm]) <6>[ 13.265308] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0 <6>[ 13.274506] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes <6>[ 13.283366] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes <6>[ 13.291858] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes <4>[ 13.292732] rtc-hym8563 0-0051: no valid clock/calendar values available <6>[ 13.305771] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 13.317379] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 13.325100] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 13.328348] rtc-hym8563 0-0051: registered as rtc0 <6>[ 13.331643] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <4>[ 13.358324] rtc-hym8563 0-0051: no valid clock/calendar values available <3>[ 13.366111] rtc-hym8563 0-0051: hctosys: unable to read the hardware clock <6>[ 13.375380] dwmmc_rockchip ff0d0000.mmc: allocated mmc-pwrseq <6>[ 13.382121] mmc_host mmc2: card is non-removable. <6>[ 13.408238] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) <6>[ 13.433955] panfrost ffa30000.gpu: clock rate = 400000000 <6>[ 13.444025] rk3288-crypto ff8a0000.crypto: will run requests pump with realtime priority <6>[ 13.454150] panfrost ffa30000.gpu: mali-t760 id 0x750 major 0x0 minor 0x0 status 0x1 <6>[ 13.463116] panfrost ffa30000.gpu: features: 00000000,00000407, issues: 00000000,24040400 <6>[ 13.472568] panfrost ffa30000.gpu: Features: L2:0x07120206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7 <6>[ 13.486096] panfrost ffa30000.gpu: shader_present=0xf l2_present=0x1 <6>[ 13.499231] [drm] Initialized panfrost 1.2.0 20180908 for ffa30000.gpu on minor 1 <6>[ 13.499469] rk3288-crypto ff8a0000.crypto: Crypto Accelerator successfully registered <6>[ 13.537531] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) <6>[ 13.550171] mmc2: new high speed SDIO card at address 0001 <5>[ 13.572999] cfg80211: Loading compiled-in X.509 certificates for regulatory database done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL <5>[ 13.612814] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' <4>[ 13.620494] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 <6>[ 13.630487] cfg80211: failed to load regulatory.db Starting dropbear sshd: <6>[ 13.631799] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4339-sdio for chip BCM4339/2 OK <4>[ 13.648854] brcmfmac mmc2:0001:1: Direct firmware load for brcm/brcmfmac4339-sdio.radxa,rock2-square.bin failed with error -2 <4>[ 13.662012] brcmfmac mmc2:0001:1: Direct firmware load for brcm/brcmfmac4339-sdio.bin failed with error -2 /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-10742054/environment . /lava-10742054/environment / # /lava-10742054/bin/lava-test-runner /lava-10742054/0 /lava-10742054/bin/lava-test-runner /lava-10742054/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-10742054/0/tests/0_dmesg + cat uuid <8>[ 14.236189] + UUID=10742054_1.5.2.4.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 14.265355] <8>[ 14.294913] <8>[ 14.318867] + set +x <8>[ 14.329345] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-10742054/environment / # . /lava-10742054/environment/lava-10742054/bin/lava-test-runner /lava-10742054/1 / # <3>[ 14.682820] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50 /lava-10742054/bin/lava-test-runner /lava-10742054/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-10742054/1/tests/1_boot<8>[ 14.806951] rr + cat uuid + UUID=10742054_1.5.2.4.5 + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-10742054/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-10742054/1/../bin/lav<8>[ 14.840591] a-test-case /lava-10742054/1/../bin/lava-test-case <8>[ 14.871488] /lava-10742054/1/../bin/lava-test-case <8>[ 14.888585] /lava-10742054/1/../bin/lava-test-case <8>[ 14.915917] /lava-10742054/1/../bin/lava-test-case <8>[ 14.945739] /lava-10742054/1/../bin/lava-test-case <8>[ 14.965687] /lava-10742054/1/../bin/lava-test-case <8>[ 14.989781] /lava-10742054/1/../bin/lava-test-case <8>[ 15.010647] /lava-10742054/1/../bin/lava-test-case <8>[ 15.033216] + set +x <8>[ 15.042107] / #