[Enter `^Ec?' for help] U-Boot SPL 2015.10-00025-g943d444 (Feb 19 2016 - 15:04:45) U-Boot 2015.10-00025-g943d444 (Feb 19 2016 - 15:04:45 +0000) Model: Radxa Rock 2 Square DRAM: 2 GiB MMC: dwmmc@ff0c0000: 0, dwmmc@ff0f0000: 1 *** Warning - bad CRC, using default environment In: serial@ff690000 Out: serial@ff690000 Err: serial@ff690000 Incorrect eeprom header Net: Warning: ethernet@ff290000 (eth0) using random MAC address - 0a:27:7a:cb:a9:73 eth0: ethernet@ff290000 Hit any key to stop autoboot: 1  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp ethernet@ff290000 Waiting for PHY auto negotiation to complete...... done Speed: 1000, full duplex BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 DHCP client bound to address 192.168.201.150 (760 ms) => setenv serverip 192.168.201.1 setenv serverip 192.168.201.1 => tftp 0x2000000 11025658/tftp-deploy-v69cm98p/kernel/zImage tftp 0x2000000 11025658/tftp-deploy-v69cm98p/kernel/zImage Speed: 1000, full duplex Using ethernet@ff290000 device TFTP from server 192.168.201.1; our IP address is 192.168.201.150 Filename '11025658/tftp-deploy-v69cm98p/kernel/zImage'. Load address: 0x2000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ####################################################### 3.6 MiB/s done Bytes transferred = 10347008 (9de200 hex) => tftp 0x4000000 11025658/tftp-deploy-v69cm98p/ramdisk/ramdisk.cpio.gz.uboot tftp 0x4000000 11025658/tftp-deploy-v69cm98p/ramdisk/ramdisk.cpio.gz.uboot Speed: 1000, full duplex Using ethernet@ff290000 device TFTP from server 192.168.201.1; our IP address is 192.168.201.150 Filename '11025658/tftp-deploy-v69cm98p/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x4000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################ 3.5 MiB/s done Bytes transferred = 17153044 (105bc14 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x1f00000 11025658/tftp-deploy-v69cm98p/dtb/rk3288-rock2-square.dtb tftp 0x1f00000 11025658/tftp-deploy-v69cm98p/dtb/rk3288-rock2-square.dtb Speed: 1000, full duplex Using ethernet@ff290000 device TFTP from server 192.168.201.1; our IP address is 192.168.201.150 Filename '11025658/tftp-deploy-v69cm98p/dtb/rk3288-rock2-square.dtb'. Load address: 0x1f00000 Loading: *### 3.1 MiB/s done Bytes transferred = 41716 (a2f4 hex) => setenv bootargs 'console=ttyS2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' setenv bootargs 'console=ttyS2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' => bootz 0x2000000 0x4000000 0x1f00000 bootz 0x2000000 0x4000000 0x1f00000 Kernel image @ 0x2000000 [ 0x000000 - 0x9de200 ] ## Loading init Ramdisk from Legacy Image at 04000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 17152980 Bytes = 16.4 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 01f00000 Booting using the fdt blob at 0x1f00000 Using Device Tree in place at 01f00000, end 01f0d2f3 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x500 [ 0.000000] Linux version 6.1.31 (KernelCI@build-j134754-arm-gcc-10-multi-v7-defconfig-wbznk) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Thu Jul 6 03:11:48 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Radxa Rock 2 Square [ 0.000000] earlycon: uart0 at MMIO32 0xff690000 (options '115200n8') [ 0.000000] printk: bootconsole [uart0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000030000000-0x000000007fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] percpu: Embedded 16 pages/cpu s34580 r8192 d22764 u65536 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752 [ 0.000000] Kernel command line: console=ttyS2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 1970776K/2097152K available (14336K kernel code, 2468K rwdata, 6008K rodata, 2048K init, 429K bss, 60840K reserved, 65536K cma-reserved, 1245184K highmem) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 <6>[ 0.000000] trace event string verifier disabled <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). <6>[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns <6>[ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns <6>[ 0.009083] Switching to timer-based delay loop, resolution 41ns <6>[ 0.023270] Console: colour dummy device 80x30 <6>[ 0.028487] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) <6>[ 0.040163] pid_max: default: 32768 minimum: 301 <6>[ 0.045708] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.054050] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.063492] CPU: Testing write buffer coherency: ok <6>[ 0.069221] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.075349] CPU0: thread -1, cpu 0, socket 5, mpidr 80000500 <6>[ 0.082965] Setting up static identity map for 0x300000 - 0x3000ac <6>[ 0.092105] rcu: Hierarchical SRCU implementation. <6>[ 0.097652] rcu: Max phase no-delay instances is 1000. <6>[ 0.108517] EFI services will not be available. <6>[ 0.114149] smp: Bringing up secondary CPUs ... <6>[ 0.121225] CPU1: thread -1, cpu 1, socket 5, mpidr 80000501 <6>[ 0.121245] CPU1: Spectre v2: using BPIALL workaround <6>[ 0.135553] CPU2: thread -1, cpu 2, socket 5, mpidr 80000502 <6>[ 0.135573] CPU2: Spectre v2: using BPIALL workaround <6>[ 0.149813] CPU3: thread -1, cpu 3, socket 5, mpidr 80000503 <6>[ 0.149832] CPU3: Spectre v2: using BPIALL workaround <6>[ 0.162284] smp: Brought up 1 node, 4 CPUs <6>[ 0.167101] SMP: Total of 4 processors activated (192.00 BogoMIPS). <6>[ 0.174270] CPU: All CPU(s) started in SVC mode. <6>[ 0.180266] devtmpfs: initialized <6>[ 0.193791] VFP support v0.3: implementor 41 architecture 3 part 30 variant d rev 0 <6>[ 0.202754] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.213873] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) <6>[ 0.223702] pinctrl core: initialized pinctrl subsystem <6>[ 0.233596] DMI not present or invalid. <6>[ 0.238935] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.248103] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.258934] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.259004] cpuidle: using governor menu <6>[ 0.271144] No ATAGs? <6>[ 0.274065] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. <6>[ 0.283172] hw-breakpoint: maximum watchpoint size is 4 bytes. <6>[ 0.293353] Serial: AMBA PL011 UART driver <6>[ 0.322100] platform ff940000.vop: Fixed dependency cycle(s) with /hdmi@ff980000 <6>[ 0.330621] platform ff930000.vop: Fixed dependency cycle(s) with /hdmi@ff980000 <6>[ 0.355410] rockchip-gpio ff750000.gpio: probed /pinctrl/gpio@ff750000 <6>[ 0.363640] rockchip-gpio ff780000.gpio: probed /pinctrl/gpio@ff780000 <6>[ 0.371797] rockchip-gpio ff790000.gpio: probed /pinctrl/gpio@ff790000 <6>[ 0.379996] rockchip-gpio ff7a0000.gpio: probed /pinctrl/gpio@ff7a0000 <6>[ 0.388233] rockchip-gpio ff7b0000.gpio: probed /pinctrl/gpio@ff7b0000 <6>[ 0.396436] rockchip-gpio ff7c0000.gpio: probed /pinctrl/gpio@ff7c0000 <6>[ 0.404599] rockchip-gpio ff7d0000.gpio: probed /pinctrl/gpio@ff7d0000 <6>[ 0.412811] rockchip-gpio ff7e0000.gpio: probed /pinctrl/gpio@ff7e0000 <6>[ 0.420970] rockchip-gpio ff7f0000.gpio: probed /pinctrl/gpio@ff7f0000 <6>[ 0.459622] iommu: Default domain type: Translated <6>[ 0.465268] iommu: DMA domain TLB invalidation policy: strict mode <5>[ 0.473351] SCSI subsystem initialized <6>[ 0.478263] usbcore: registered new interface driver usbfs <6>[ 0.484676] usbcore: registered new interface driver hub <6>[ 0.490837] usbcore: registered new device driver usb <6>[ 0.499337] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.505075] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.515426] PTP clock support registered <6>[ 0.520283] EDAC MC: Ver: 3.0.0 <6>[ 0.527748] vgaarb: loaded <6>[ 2.083225] clocksource: Switched to clocksource arch_sys_counter <6>[ 2.101773] NET: Registered PF_INET protocol family <6>[ 2.107717] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 2.118525] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) <6>[ 2.128056] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 2.136882] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 2.145761] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) <6>[ 2.154353] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 2.161714] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 2.169328] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 2.177578] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 2.184775] RPC: Registered named UNIX socket transport module. <6>[ 2.191565] RPC: Registered udp transport module. <6>[ 2.197048] RPC: Registered tcp transport module. <6>[ 2.202498] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 2.209873] PCI: CLS 0 bytes, default 64 <6>[ 2.214934] Trying to unpack rootfs image as initramfs... <6>[ 2.222188] hw perfevents: enabled with armv7_cortex_a12 PMU driver, 7 counters available <5>[ 2.233397] Initialise system trusted keyrings <6>[ 2.238921] workingset: timestamp_bits=30 max_order=19 bucket_order=0 <6>[ 2.253585] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 2.261122] NFS: Registering the id_resolver key type <5>[ 2.267041] Key type id_resolver registered <5>[ 2.271922] Key type id_legacy registered <6>[ 2.276755] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 2.284427] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <6>[ 2.292905] ntfs: driver 2.1.32 [Flags: R/O]. <5>[ 2.298562] Key type asymmetric registered <5>[ 2.303377] Asymmetric key parser 'x509' registered <6>[ 2.309215] bounce: pool size: 64 pages <6>[ 2.313866] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) <6>[ 2.322277] io scheduler mq-deadline registered <6>[ 2.327556] io scheduler kyber registered <6>[ 2.387871] dma-pl330 ff250000.dma-controller: Loaded driver for PL330 DMAC-241330 <6>[ 2.396520] dma-pl330 ff250000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16 <6>[ 2.409069] dma-pl330 ffb20000.dma-controller: Loaded driver for PL330 DMAC-241330 <6>[ 2.417715] dma-pl330 ffb20000.dma-controller: DBUFF-64x8bytes Num_Chans-5 Num_Peri-6 Num_Events-10 <6>[ 2.515453] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled <6>[ 2.526119] printk: console [ttyS2] disabled <6>[ 2.531170] ff690000.serial: ttyS2 at MMIO 0xff690000 (irq = 47, base_baud = 1500000) is a 16550A <6>[ 2.541400] printk: console [ttyS2] enabled <6>[ 2.541400] printk: console [ttyS2] enabled <6>[ 2.551385] printk: bootconsole [uart0] disabled <6>[ 2.551385] printk: bootconsole [uart0] disabled <6>[ 2.566066] SuperH (H)SCI(F) driver initialized <6>[ 2.573198] msm_serial: driver initialized <6>[ 2.578083] STMicroelectronics ASC driver initialized <6>[ 2.585918] STM32 USART driver initialized <6>[ 2.616912] brd: module loaded <6>[ 2.627619] loop: module loaded <6>[ 2.649663] CAN device driver interface <6>[ 2.656315] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded <6>[ 2.665014] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 2.670862] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 2.677861] igb: Intel(R) Gigabit Ethernet Network Driver <6>[ 2.684208] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 2.698781] pegasus: Pegasus/Pegasus II USB Ethernet driver <6>[ 2.705385] usbcore: registered new interface driver pegasus <6>[ 2.712065] usbcore: registered new interface driver asix <6>[ 2.718473] usbcore: registered new interface driver ax88179_178a <6>[ 2.725648] usbcore: registered new interface driver cdc_ether <6>[ 2.732518] usbcore: registered new interface driver smsc75xx <6>[ 2.739311] usbcore: registered new interface driver smsc95xx <6>[ 2.746094] usbcore: registered new interface driver net1080 <6>[ 2.752771] usbcore: registered new interface driver cdc_subset <6>[ 2.759753] usbcore: registered new interface driver zaurus <6>[ 2.766387] usbcore: registered new interface driver cdc_ncm <4>[ 2.776474] dwc2 ff540000.usb: supply vusb_d not found, using dummy regulator <4>[ 2.784961] dwc2 ff540000.usb: supply vusb_a not found, using dummy regulator <6>[ 2.863709] dwc2 ff540000.usb: DWC OTG Controller <6>[ 2.869299] dwc2 ff540000.usb: new USB bus registered, assigned bus number 1 <6>[ 2.877569] dwc2 ff540000.usb: irq 51, io mem 0xff540000 <6>[ 2.884739] hub 1-0:1.0: USB hub found <6>[ 2.889276] hub 1-0:1.0: 1 port detected <4>[ 2.894769] dwc2 ff580000.usb: supply vusb_d not found, using dummy regulator <4>[ 2.903237] dwc2 ff580000.usb: supply vusb_a not found, using dummy regulator <6>[ 3.052945] dwc2 ff580000.usb: EPs: 10, dedicated fifos, 972 entries in SPRAM <6>[ 3.063138] dwc2 ff580000.usb: DWC OTG Controller <6>[ 3.068722] dwc2 ff580000.usb: new USB bus registered, assigned bus number 2 <6>[ 3.076964] dwc2 ff580000.usb: irq 52, io mem 0xff580000 <6>[ 3.084048] hub 2-0:1.0: USB hub found <6>[ 3.088583] hub 2-0:1.0: 1 port detected <6>[ 3.096008] ehci-platform ff500000.usb: EHCI Host Controller <6>[ 3.098924] usbcore: registered new interface driver usb-storage <6>[ 3.102662] ehci-platform ff500000.usb: new USB bus registered, assigned bus number 3 <6>[ 3.118610] i2c_dev: i2c /dev entries driver <6>[ 3.130134] ehci-platform ff500000.usb: irq 53, io mem 0xff500000 <6>[ 3.133626] VDD_LOG: Bringing 1100000uV into 1000000-1000000uV <6>[ 3.162896] ehci-platform ff500000.usb: USB 2.0 started, EHCI 1.00 <6>[ 3.169993] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected! <6>[ 3.170907] hub 3-0:1.0: USB hub found <6>[ 3.182657] hub 3-0:1.0: 1 port detected <6>[ 3.182776] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected! <4>[ 3.218104] dw_wdt ff800000.watchdog: No valid TOPs array specified <6>[ 3.236518] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 500000 KHz, changing to: 600000 KHz <6>[ 3.251990] sdhci: Secure Digital Host Controller Interface driver <6>[ 3.259230] sdhci: Copyright(c) Pierre Ossman <6>[ 3.267162] Synopsys Designware Multimedia Card Interface Driver <6>[ 3.274961] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 3.275303] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 3.291828] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 3.299549] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 3.306113] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 3.317491] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 3.325506] usbcore: registered new interface driver usbhid <6>[ 3.332025] usbhid: USB HID core driver <6>[ 3.340056] NET: Registered PF_INET6 protocol family <6>[ 3.346467] Segment Routing with IPv6 <6>[ 3.350876] In-situ OAM (IOAM) with IPv6 <6>[ 3.355608] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 3.362819] NET: Registered PF_PACKET protocol family <6>[ 3.368788] can: controller area network core <6>[ 3.373995] NET: Registered PF_CAN protocol family <6>[ 3.379641] can: raw protocol <6>[ 3.383256] can: broadcast manager protocol <6>[ 3.388225] can: netlink gateway - max_hops=1 <5>[ 3.393592] Key type dns_resolver registered <6>[ 3.398707] ThumbEE CPU extension supported. <5>[ 3.403785] Registering SWP/SWPB emulation handler <5>[ 3.409782] Loading compiled-in X.509 certificates <6>[ 3.436418] rk_gmac-dwmac ff290000.ethernet: IRQ eth_lpi not found <6>[ 3.443706] rk_gmac-dwmac ff290000.ethernet: PTP uses main clock <6>[ 3.451294] rk_gmac-dwmac ff290000.ethernet: clock input or output? (input). <6>[ 3.459360] Freeing initrd memory: 16752K <6>[ 3.459488] rk_gmac-dwmac ff290000.ethernet: TX delay(0x30). <6>[ 3.470837] rk_gmac-dwmac ff290000.ethernet: RX delay(0x10). <6>[ 3.477459] rk_gmac-dwmac ff290000.ethernet: integrated PHY? (no). <6>[ 3.484681] rk_gmac-dwmac ff290000.ethernet: clock input from PHY <6>[ 3.496784] rk_gmac-dwmac ff290000.ethernet: init for RGMII <6>[ 3.503352] usb 3-1: new high-speed USB device number 2 using ehci-platform <6>[ 3.511521] rk_gmac-dwmac ff290000.ethernet: User ID: 0x10, Synopsys ID: 0x35 <6>[ 3.519798] rk_gmac-dwmac ff290000.ethernet: DWMAC1000 <6>[ 3.525930] rk_gmac-dwmac ff290000.ethernet: DMA HW capability register supported <6>[ 3.534591] rk_gmac-dwmac ff290000.ethernet: RX Checksum Offload Engine supported <6>[ 3.543248] rk_gmac-dwmac ff290000.ethernet: COE Type 2 <6>[ 3.549373] rk_gmac-dwmac ff290000.ethernet: TX Checksum insertion supported <6>[ 3.557541] rk_gmac-dwmac ff290000.ethernet: Wake-Up On Lan supported <6>[ 3.565063] rk_gmac-dwmac ff290000.ethernet: Normal descriptors <6>[ 3.571965] rk_gmac-dwmac ff290000.ethernet: Ring mode enabled <6>[ 3.578775] rk_gmac-dwmac ff290000.ethernet: Enable RX Mitigation via HW Watchdog Timer <6>[ 3.588022] rk_gmac-dwmac ff290000.ethernet: device MAC address e6:7c:67:d7:03:ae <6>[ 3.728379] RTL8211E Gigabit Ethernet stmmac-0:00: attached PHY driver (mii_bus:phy_addr=stmmac-0:00, irq=POLL) <6>[ 3.739976] RTL8211E Gigabit Ethernet stmmac-0:01: attached PHY driver (mii_bus:phy_addr=stmmac-0:01, irq=POLL) <6>[ 3.756812] dwmmc_rockchip ff0c0000.mmc: IDMAC supports 32-bit address mode. <6>[ 3.758286] dwmmc_rockchip ff0f0000.mmc: IDMAC supports 32-bit address mode. <6>[ 3.758464] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 3.765680] input: gpio-keys as /devices/platform/gpio-keys/input/input0 <6>[ 3.773264] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 3.796819] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 3.803355] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 3.814468] dwmmc_rockchip ff0c0000.mmc: Using internal DMA controller. <6>[ 3.822155] dwmmc_rockchip ff0c0000.mmc: Version ID is 270a <6>[ 3.828703] dwmmc_rockchip ff0c0000.mmc: DW MMC controller at irq 62,32 bit host data width,256 deep fifo <6>[ 3.839753] dwmmc_rockchip ff0f0000.mmc: Using internal DMA controller. <6>[ 3.841392] hub 3-1:1.0: USB hub found <6>[ 3.843229] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 3.847454] dwmmc_rockchip ff0f0000.mmc: Version ID is 270a <6>[ 3.852316] hub 3-1:1.0: 4 ports detected <6>[ 3.860117] dwmmc_rockchip ff0f0000.mmc: DW MMC controller at irq 63,32 bit host data width,256 deep fifo <6>[ 3.866515] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) <6>[ 3.893085] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 3.900776] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 3.900904] dwmmc_rockchip ff0f0000.mmc: allocated mmc-pwrseq <6>[ 3.907314] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 3.914017] mmc_host mmc0: card is non-removable. <6>[ 3.928625] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 3.938804] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 3.946499] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 3.953031] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 3.966476] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) <6>[ 3.994080] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 3.994285] rk_gmac-dwmac ff290000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0 <6>[ 4.012680] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 4.013741] rk_gmac-dwmac ff290000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211E Gigabit Ethernet] (irq=POLL) <6>[ 4.020394] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 4.038677] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 4.042160] rk_gmac-dwmac ff290000.ethernet eth0: No Safety Features support found <6>[ 4.058433] rk_gmac-dwmac ff290000.ethernet eth0: PTP not supported by HW <6>[ 4.066495] rk_gmac-dwmac ff290000.ethernet eth0: configuring for phy/rgmii link mode <6>[ 4.097583] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) <6>[ 4.109769] mmc0: new high speed MMC card at address 0001 <6>[ 4.116666] mmcblk0: mmc0:0001 032GE4 29.1 GiB <6>[ 4.125364] mmcblk0: p1 p2 <6>[ 4.129235] mmcblk0boot0: mmc0:0001 032GE4 4.00 MiB <6>[ 4.136170] mmcblk0boot1: mmc0:0001 032GE4 4.00 MiB <6>[ 4.142856] mmcblk0rpmb: mmc0:0001 032GE4 4.00 MiB, chardev (236:0) <6>[ 4.153348] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 4.161609] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 4.169314] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 4.175842] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 7.234175] rk_gmac-dwmac ff290000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off <6>[ 7.244151] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 7.282929] Sending DHCP requests .., OK <6>[ 13.047881] IP-Config: Got DHCP answer from 192.168.201.1, my address is 192.168.201.115 <6>[ 13.057406] IP-Config: Complete: <6>[ 13.061345] device=eth0, hwaddr=e6:7c:67:d7:03:ae, ipaddr=192.168.201.115, mask=255.255.255.0, gw=192.168.201.1 <6>[ 13.073593] host=192.168.201.115, domain=lava-rack, nis-domain=(none) <6>[ 13.081626] bootserver=192.168.201.1, rootserver=192.168.201.1, rootpath= <6>[ 13.081671] nameserver0=192.168.201.1 <4>[ 13.098604] dw-apb-uart ff690000.serial: forbid DMA for kernel console <6>[ 13.120199] Freeing unused kernel image (initmem) memory: 2048K <6>[ 13.142990] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 13.219099] udevd[114]: starting version 3.2.9 <5>[ 13.225307] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 13.233309] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 13.241077] random: udevd: uninitialized urandom read (16 bytes read) <27>[ 13.252147] udevd[114]: specified user 'tss' unknown <27>[ 13.258328] udevd[114]: specified group 'tss' unknown <30>[ 13.265330] udevd[115]: starting eudev-3.2.9 <6>[ 13.458559] rockchip-vop ff930000.vop: Adding to iommu group 0 <6>[ 13.465715] rockchip-vop ff940000.vop: Adding to iommu group 1 <6>[ 13.468331] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 13.495815] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 13.503565] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 13.510104] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 13.529988] rockchip-drm display-subsystem: bound ff930000.vop (ops vop_component_ops [rockchipdrm]) <6>[ 13.566065] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 13.575210] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 13.575695] rockchip-drm display-subsystem: bound ff940000.vop (ops vop_component_ops [rockchipdrm]) <6>[ 13.582942] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <4>[ 13.593468] dwhdmi-rockchip ff980000.hdmi: supply avdd-0v9 not found, using dummy regulator <6>[ 13.599957] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <4>[ 13.609651] dwhdmi-rockchip ff980000.hdmi: supply avdd-1v8 not found, using dummy regulator <4>[ 13.674565] rtc-hym8563 0-0051: no valid clock/calendar values available <6>[ 13.682571] dwhdmi-rockchip ff980000.hdmi: Detected HDMI TX controller v2.00a with HDCP (DWC MHL PHY) <6>[ 13.697165] rtc-hym8563 0-0051: registered as rtc0 <4>[ 13.705916] rtc-hym8563 0-0051: no valid clock/calendar values available <3>[ 13.713731] rtc-hym8563 0-0051: hctosys: unable to read the hardware clock <6>[ 13.724708] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 13.734409] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 13.742105] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 13.748655] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 13.760379] rockchip-drm display-subsystem: bound ff980000.hdmi (ops dw_hdmi_rockchip_ops [rockchipdrm]) <6>[ 13.773252] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0 <6>[ 13.782439] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes <6>[ 13.791407] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes <6>[ 13.799905] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes <6>[ 13.809864] dwmmc_rockchip ff0d0000.mmc: allocated mmc-pwrseq <6>[ 13.816607] mmc_host mmc2: card is non-removable. <6>[ 13.837355] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) <6>[ 13.865570] panfrost ffa30000.gpu: clock rate = 400000000 <6>[ 13.867249] rk3288-crypto ff8a0000.crypto: will run requests pump with realtime priority <6>[ 13.878895] panfrost ffa30000.gpu: mali-t760 id 0x750 major 0x0 minor 0x0 status 0x1 <6>[ 13.882601] rk3288-crypto ff8a0000.crypto: Crypto Accelerator successfully registered <6>[ 13.890187] panfrost ffa30000.gpu: features: 00000000,00000407, issues: 00000000,24040400 <6>[ 13.890193] panfrost ffa30000.gpu: Features: L2:0x07120206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7 <6>[ 13.890200] panfrost ffa30000.gpu: shader_present=0xf l2_present=0x1 <6>[ 13.909243] [drm] Initialized panfrost 1.2.0 20180908 for ffa30000.gpu on minor 1 <6>[ 13.993281] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) <6>[ 14.013062] mmc2: new high speed SDIO card at address 0001 <5>[ 14.056646] cfg80211: Loading compiled-in X.509 certificates for regulatory database <5>[ 14.099559] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' <4>[ 14.107245] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 <6>[ 14.117196] cfg80211: failed to load regulatory.db <6>[ 14.123865] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4339-sdio for chip BCM4339/2 <4>[ 14.133875] brcmfmac mmc2:0001:1: Direct firmware load for brcm/brcmfmac4339-sdio.radxa,rock2-square.bin failed with error -2 <4>[ 14.147038] brcmfmac mmc2:0001:1: Direct firmware load for brcm/brcmfmac4339-sdio.bin failed with error -2 done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: <3>[ 15.170374] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50 <5>[ 24.962839] random: crng init done <5>[ 24.966932] random: 2 urandom warning(s) missed due to ratelimiting OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-11025658/environment . /lava-11025658/environment / # /lava-11025658/bin/lava-test-runner /lava-11025658/0 /lava-11025658/bin/lava-test-runner /lava-11025658/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-11025658/0/tests/0_dmesg<8>[ 25.545979] + cat uuid + UUID=11025658_1.5.2.4.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 25.577212] <8>[ 25.600842] <8>[ 25.623781] + <8>[ 25.633994] set +x / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-11025658/environment / # . /lava-11025658/environment/lava-11025658/bin/lava-test-runner /lava-11025658/1 / # /lava-11025658/bin/lava-test-runner /lava-11025658/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-11025658/1/tests/1_boot<8>[ 26.115112] rr + cat uuid + UUID=11025658_1.5.2.4.5 + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-11025658/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-11025658/1/../bin/lav<8>[ 26.147954] a-test-case /lava-11025658/1/../bin/lava-test-case <8>[ 26.171964] /lava-11025658/1/../bin/lava-test-case <8>[ 26.189050] /lava-11025658/1/../bin/lava-test-case <8>[ 26.215872] /lava-11025658/1/../bin/lava-test-case <8>[ 26.242197] /lava-11025658/1/../bin/lava-test-case <8>[ 26.267887] /lava-11025658/1/../bin/lava-test-case <8>[ 26.291828] /lava-11025658/1/../bin/lava-test-case <8>[ 26.312302] /lava-11025658/1/../bin/lava-test-case <8>[ 26.334755] + set +x <8>[ 26.343648] / #