Trying 127.0.0.1... Connected to 127.0.0.1. Escape character is '^]'. U-Boot 2019.04-lf-5.4.y_v2019.04+g228843cdf5 (Feb 24 2020 - 11:58:52 +0000) CPU: Freescale i.MX6UL rev1.2 696 MHz (running at 396 MHz) CPU: Automotive temperature grade (-40C to 125C) at 29C Reset cause: POR Model: Freescale i.MX6 UltraLite 14x14 EVK Board Board: MX6UL 14x14 EVK DRAM: 512 MiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... *** Warning - bad CRC, using default environment Display: TFT43AB (480x272) Video: 480x272x24 In: serial Out: serial Err: serial switch to partitions #0, OK mmc1 is current device flash target is MMC:1 Net: Warning: ethernet@020b4000 using MAC address from ROM eth1: ethernet@020b4000 [PRIME] Warning: ethernet@02188000 using MAC address from ROM , eth0: ethernet@02188000 Fastboot: Normal Normal Boot Hit any key to stop autoboot: 3  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 DHCP client bound to address 172.16.1.212 (1339 ms) => setenv serverip 59.144.98.45 setenv serverip 59.144.98.45 => tftp ${loadaddr} 1252436/tftp-deploy-cf593m8d/kernel/zImage tftp ${loadaddr} 1252436/tftp-deploy-cf593m8d/kernel/zImage Using ethernet@020b4000 device TFTP from server 59.144.98.45; our IP address is 172.16.1.212; sending through gateway 172.16.1.4 Filename '1252436/tftp-deploy-cf593m8d/kernel/zImage'. Load address: 0x80800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# 5 MiB/s done Bytes transferred = 10482176 (9ff200 hex) => tftp ${initrd_addr} 1252436/tftp-deploy-cf593m8d/ramdisk/ramdisk.cpio.gz.uboot tftp ${initrd_addr} 1252436/tftp-deploy-cf593m8d/ramdisk/ramdisk.cpio.gz.uboot Using ethernet@020b4000 device TFTP from server 59.144.98.45; our IP address is 172.16.1.212; sending through gateway 172.16.1.4 Filename '1252436/tftp-deploy-cf593m8d/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x86800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# # 4.9 MiB/s done Bytes transferred = 17178224 (1061e70 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp ${fdt_addr} 1252436/tftp-deploy-cf593m8d/dtb/imx6ul-14x14-evk.dtb tftp ${fdt_addr} 1252436/tftp-deploy-cf593m8d/dtb/imx6ul-14x14-evk.dtb Using ethernet@020b4000 device TFTP from server 59.144.98.45; our IP address is 172.16.1.212; sending through gateway 172.16.1.4 Filename '1252436/tftp-deploy-cf593m8d/dtb/imx6ul-14x14-evk.dtb'. Load address: 0x83000000 Loading: *### 3.4 MiB/s done Bytes transferred = 31711 (7bdf hex) => setenv bootargs 'console=ttymxc0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttymxc0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' => bootz ${loadaddr} ${initrd_addr} ${fdt_addr} bootz ${loadaddr} ${initrd_addr} ${fdt_addr} Kernel image @ 0x80800000 [ 0x000000 - 0x9ff200 ] ## Loading init Ramdisk from Legacy Image at 86800000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 17178160 Bytes = 16.4 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 8300abde ft_system_setup for mx6 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.1.54-cip6 (KernelCI@build-j53192-arm-gcc-10-multi-v7-defconfig-k2dgq) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Thu Sep 21 07:51:01 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Freescale i.MX6 UltraLite 14x14 EVK Board [ 0.000000] earlycon: ec_imx6q0 at MMIO 0x02020000 (options '') [ 0.000000] printk: bootconsole [ec_imx6q0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x9c000000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x000000009fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fffffff] [ 0.000000] percpu: Embedded 16 pages/cpu s34580 r8192 d22764 u65536 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: console=ttymxc0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 410692K/524288K available (14336K kernel code, 2468K rwdata, 6264K rodata, 2048K init, 429K bss, 48060K reserved, 65536K cma-reserved, 0K highmem) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 <6>[ 0.000000] trace event string verifier disabled <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=1. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.000000] Switching to timer-based delay loop, resolution 41ns <6>[ 0.000003] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns <6>[ 0.008086] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns <6>[ 0.025555] Console: colour dummy device 80x30 <6>[ 0.027552] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) <6>[ 0.038166] CPU: Testing write buffer coherency: ok <6>[ 0.043209] pid_max: default: 32768 minimum: 301 <6>[ 0.048529] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.055654] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.065820] CPU0: update cpu_capacity 1024 <6>[ 0.068003] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 <6>[ 0.076246] Setting up static identity map for 0x80300000 - 0x803000ac <6>[ 0.083263] rcu: Hierarchical SRCU implementation. <6>[ 0.085838] rcu: Max phase no-delay instances is 1000. <6>[ 0.097347] EFI services will not be available. <6>[ 0.099860] smp: Bringing up secondary CPUs ... <6>[ 0.104116] smp: Brought up 1 node, 1 CPU <6>[ 0.108456] SMP: Total of 1 processors activated (48.00 BogoMIPS). <6>[ 0.114815] CPU: All CPU(s) started in SVC mode. <6>[ 0.120969] devtmpfs: initialized <6>[ 0.137520] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 <6>[ 0.143285] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.152867] futex hash table entries: 256 (order: 2, 16384 bytes, linear) <6>[ 0.165093] pinctrl core: initialized pinctrl subsystem <6>[ 0.175120] DMI not present or invalid. <6>[ 0.178636] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.187418] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.197847] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.198082] cpuidle: using governor menu <6>[ 0.206484] CPU identified as i.MX6UL, silicon rev 1.2 <6>[ 0.220883] platform soc: Fixed dependency cycle(s) with /soc/bus@2000000/gpc@20dc000 <6>[ 0.281291] platform panel: Fixed dependency cycle(s) with /soc/bus@2100000/lcdif@21c8000/port/endpoint <6>[ 0.290371] No ATAGs? <6>[ 0.290860] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. <6>[ 0.299083] hw-breakpoint: maximum watchpoint size is 8 bytes. <6>[ 0.312554] imx6ul-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver <6>[ 0.333312] Serial: AMBA PL011 UART driver <6>[ 3.112197] iommu: Default domain type: Translated <6>[ 3.114528] iommu: DMA domain TLB invalidation policy: strict mode <5>[ 3.123191] SCSI subsystem initialized <6>[ 3.126376] usbcore: registered new interface driver usbfs <6>[ 3.130923] usbcore: registered new interface driver hub <6>[ 3.136577] usbcore: registered new device driver usb <6>[ 3.146304] i2c i2c-0: IMX I2C adapter registered <6>[ 3.151047] i2c 1-003c: Fixed dependency cycle(s) with /soc/bus@2100000/csi@21c4000/port/endpoint <6>[ 3.157820] i2c i2c-1: IMX I2C adapter registered <6>[ 3.165619] pps_core: LinuxPPS API ver. 1 registered <6>[ 3.168029] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 3.177571] PTP clock support registered <6>[ 3.182177] EDAC MC: Ver: 3.0.0 <6>[ 3.194061] vgaarb: loaded <6>[ 3.195192] clocksource: Switched to clocksource mxc_timer1 <6>[ 3.325318] NET: Registered PF_INET protocol family <6>[ 3.328241] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 3.338537] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) <6>[ 3.344393] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 3.352481] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) <6>[ 3.360497] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) <6>[ 3.368049] TCP: Hash tables configured (established 4096 bind 4096) <6>[ 3.374578] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 3.381289] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 3.388862] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 3.396137] RPC: Registered named UNIX socket transport module. <6>[ 3.400477] RPC: Registered udp transport module. <6>[ 3.405525] RPC: Registered tcp transport module. <6>[ 3.410390] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 3.417160] PCI: CLS 0 bytes, default 64 <6>[ 3.423092] Trying to unpack rootfs image as initramfs... <6>[ 3.465566] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available <5>[ 3.475541] Initialise system trusted keyrings <6>[ 3.486739] workingset: timestamp_bits=30 max_order=17 bucket_order=0 <6>[ 3.507331] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 3.547691] NFS: Registering the id_resolver key type <5>[ 3.550315] Key type id_resolver registered <5>[ 3.554634] Key type id_legacy registered <6>[ 3.559389] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 3.565934] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <6>[ 3.573599] ntfs: driver 2.1.32 [Flags: R/O]. <5>[ 3.606878] Key type asymmetric registered <5>[ 3.608431] Asymmetric key parser 'x509' registered <6>[ 3.613958] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) <6>[ 3.621436] io scheduler mq-deadline registered <6>[ 3.626054] io scheduler kyber registered <6>[ 3.865089] mxs-dma 1804000.dma-apbh: initialized <6>[ 4.220770] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled <6>[ 4.246298] SuperH (H)SCI(F) driver init�ZX+K��5 <6>[ 4.250739] printk: console [ttymxc0] enabled <6>[ 4.250739] printk: console [ttymxc0] enabled <6>[ 4.257866] printk: bootconsole [ec_imx6q0] disabled <6>[ 4.257866] printk: bootconsole [ec_imx6q0] disabled <6>[ 4.297672] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 201, base_baud = 5000000) is a IMX <6>[ 4.328294] msm_serial: driver initialized <6>[ 4.332709] STMicroelectronics ASC driver initialized <6>[ 4.341750] STM32 USART driver initialized <6>[ 4.474247] brd: module loaded <6>[ 4.513241] loop: module loaded <6>[ 4.556292] CAN device driver interface <6>[ 4.564183] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded <6>[ 4.646123] pps pps0: new PPS source ptp0 <6>[ 7.288884] Freeing initrd memory: 16776K <4>[ 7.295653] imx-sdma 20ec000.dma-controller: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 <6>[ 7.306444] imx-sdma 20ec000.dma-controller: external firmware not found, using ROM firmware <6>[ 7.478304] fec 20b4000.ethernet eth0: registered PHC device 0 <6>[ 7.488144] pps pps1: new PPS source ptp1 <6>[ 10.085372] fec 2188000.ethernet eth1: registered PHC device 1 <6>[ 10.094379] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 10.099772] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 10.106237] igb: Intel(R) Gigabit Ethernet Network Driver <6>[ 10.111931] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 10.133012] pegasus: Pegasus/Pegasus II USB Ethernet driver <6>[ 10.139140] usbcore: registered new interface driver pegasus <6>[ 10.145326] usbcore: registered new interface driver asix <6>[ 10.151109] usbcore: registered new interface driver ax88179_178a <6>[ 10.157670] usbcore: registered new interface driver cdc_ether <6>[ 10.163902] usbcore: registered new interface driver smsc75xx <6>[ 10.170187] usbcore: registered new interface driver smsc95xx <6>[ 10.176378] usbcore: registered new interface driver net1080 <6>[ 10.182410] usbcore: registered new interface driver cdc_subset <6>[ 10.188758] usbcore: registered new interface driver zaurus <6>[ 10.194821] usbcore: registered new interface driver cdc_ncm <6>[ 10.216856] usbcore: registered new interface driver usb-storage <6>[ 10.243812] i2c_dev: i2c /dev entries driver <6>[ 10.308632] sdhci: Secure Digital Host Controller Interface driver <6>[ 10.315235] sdhci: Copyright(c) Pierre Ossman <6>[ 10.327088] Synopsys Designware Multimedia Card Interface Driver <6>[ 10.339818] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 10.360020] sdhci-esdhc-imx 2190000.mmc: Got CD GPIO <6>[ 10.371823] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 10.383287] usbcore: registered new interface driver usbhid <6>[ 10.389288] usbhid: USB HID core driver <6>[ 10.418204] NET: Registered PF_INET6 protocol family <6>[ 10.427570] Segment Routing with IPv6 <6>[ 10.431732] In-situ OAM (IOAM) with IPv6 <6>[ 10.436338] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 10.444201] NET: Registered PF_PACKET protocol family <6>[ 10.449678] can: controller area network core <6>[ 10.454483] NET: Registered PF_CAN protocol family <6>[ 10.459635] can: raw protocol <6>[ 10.462900] can: broadcast manager protocol <6>[ 10.467430] can: netlink gateway - max_hops=1 <5>[ 10.472975] Key type dns_resolver registered <6>[ 10.482084] ThumbEE CPU extension supported. <5>[ 10.486853] Registering SWP/SWPB emulation handler <5>[ 10.494543] Loading compiled-in X.509 certificates <6>[ 10.505281] mmc1: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA <6>[ 10.513879] mmc0: SDHCI controller on 2190000.mmc [2190000.mmc] using ADMA <4>[ 10.554462] imx_usb 2184000.usb: No over current polarity defined <6>[ 10.579034] ci_hdrc ci_hdrc.1: EHCI Host Controller <6>[ 10.584259] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 10.617783] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 <6>[ 10.628806] hub 1-0:1.0: USB hub found <6>[ 10.633190] hub 1-0:1.0: 1 port detected <6>[ 10.652824] imx_thermal 20c8000.anatop:tempmon: Automotive CPU temperature grade - max:125C critical:120C passive:115C <4>[ 10.676018] mmc1: host does not support reading read-only switch, assuming write-enable <6>[ 10.693048] mmc1: new high speed SDHC card at address aaaa <6>[ 10.700142] mmcblk1: mmc1:aaaa SS16G 14.8 GiB <6>[ 10.714719] mmcblk1: p1 p2 <6>[ 10.772895] Micrel KSZ8081 or KSZ8091 20b4000.ethernet-1:01: attached PHY driver (mii_bus:phy_addr=20b4000.ethernet-1:01, irq=POLL) <6>[ 10.883055] Micrel KSZ8081 or KSZ8091 20b4000.ethernet-1:02: attached PHY driver (mii_bus:phy_addr=20b4000.ethernet-1:02, irq=POLL) <6>[ 13.928449] fec 20b4000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off <6>[ 13.936629] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 13.987846] Sending DHCP requests .., OK <6>[ 16.852693] IP-Config: Got DHCP answer from 172.16.1.4, my address is 172.16.1.212 <6>[ 16.861057] IP-Config: Complete: <6>[ 16.864658] device=eth0, hwaddr=00:04:9f:05:20:41, ipaddr=172.16.1.212, mask=255.255.255.0, gw=172.16.1.4 <6>[ 16.875388] host=172.16.1.212, domain=example.org, nis-domain=(none) <6>[ 16.882565] bootserver=0.0.0.0, rootserver=0.0.0.0, rootpath= <6>[ 16.882646] nameserver0=172.16.1.4 <6>[ 16.908025] Freeing unused kernel image (initmem) memory: 2048K <6>[ 16.928448] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 17.204236] udevd[124]: starting version 3.2.9 <5>[ 19.505174] random: crng init done <27>[ 19.524021] udevd[124]: specified user 'tss' unknown <27>[ 19.530099] udevd[124]: specified group 'tss' unknown <30>[ 19.547566] udevd[125]: starting eudev-3.2.9 <6>[ 24.519287] caam 2140000.crypto: RNG4 SH0 was previously instantiated without prediction resistance. Tearing it down <6>[ 24.530278] caam 2140000.crypto: Deinstantiated RNG4 SH0 <6>[ 24.535958] caam 2140000.crypto: Instantiated RNG4 SH0 <6>[ 24.541376] caam 2140000.crypto: RNG4 SH1 was previously instantiated without prediction resistance. Tearing it down <6>[ 24.552252] caam 2140000.crypto: Deinstantiated RNG4 SH1 <6>[ 24.557890] caam 2140000.crypto: Instantiated RNG4 SH1 <6>[ 24.563315] caam 2140000.crypto: device ID = 0x0a16030000000000 (Era 8) <6>[ 24.570232] caam 2140000.crypto: job rings = 3, qi = 0 <6>[ 25.732393] spi-nor spi5.0: n25q256a (32768 Kbytes) <6>[ 27.405818] caam algorithms registered in /proc/crypto <6>[ 27.414151] caam 2140000.crypto: caam pkc algorithms registered in /proc/crypto <6>[ 27.421944] caam 2140000.crypto: registering rng-caam <6>[ 27.428936] caam 2140000.crypto: rng crypto API alg registered prng-caam done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-1252436/environment . /lava-1252436/environment / # /lava-1252436/bin/lava-test-runner /lava-1252436/0 /lava-1252436/bin/lava-test-runner /lava-1252436/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-1252436/0/tests/0_dmesg + cat uuid + UUID=1252436_1.5.2.4.1<8>[ 33.558329] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 33.631646] <8>[ 33.698590] <8>[ 33.764766] + set +x <8>[ 33.776483] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-1252436/environment / # . /lava-1252436/environment/lava-1252436/bin/lava-test-runner /lava-1252436/1 / # /lava-1252436/bin/lava-test-runner /lava-1252436/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-1252436/1/tests/1_bootrr + cat uuid + UUID=1252436_1.5.2.4.5<8>[ 39.538674] + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-1252436/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto regulator-can-3v3 platform: supplier spi4.0 not ready backlight-display platform: supplier 2080000.pwm not ready panel platform: supplier backlight-display not ready 2090000.can platform: supplier regulator-can-3v3 not ready 2094000.can platform: supplier regulator-can-3v3 not ready sound-wm8960 fsl-asoc-card: snd_soc_register_card failed 21c8000.lcdif mxsfb: Cannot connect bridge /lava-1252436/1/../bin/lava-test-case <8>[ 40.656440] /lava-1252436/1/../bin/lava-test-case <8>[ 40.719062] /lava-1252436/1/../bin/lava-test-case <8>[ 40.756288] + set +x <8>[ 40.783498] / #