[Enter `^Ec?' for help] U-Boot 2016.03-rc1-00131-g39af3d8-dirty (Feb 09 2016 - 16:39:49 +0000) DRAM: 944 MiB WARNING: Caches not enabled RPI Model B+ (0x10) MMC: bcm2835_sdhci: 0 reading uboot.env In: serial Out: lcd Err: lcd Net: Net Initialization Skipped No ethernet found. starting USB... USB0: Core Release: 2.80a scanning bus 0 for devices... 4 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found Hit any key to stop autoboot: 2  0 U-Boot> usb start usb start U-Boot> setenv autoload no setenv autoload no U-Boot> setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff U-Boot> setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff U-Boot> dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.201.14 (259 ms) U-Boot> setenv serverip 192.168.201.1 setenv serverip 192.168.201.1 U-Boot> tftp 0x01000000 11893471/tftp-deploy-2kcea0n6/kernel/zImage tftp 0x01000000 11893471/tftp-deploy-2kcea0n6/kernel/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.201.1; our IP address is 192.168.201.14 Filename '11893471/tftp-deploy-2kcea0n6/kernel/zImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ########################################## 548.8 KiB/s done Bytes transferred = 6331464 (609c48 hex) U-Boot> tftp 0x02200000 11893471/tftp-deploy-2kcea0n6/ramdisk/ramdisk.cpio.gz.uboot tftp 0x02200000 11893471/tftp-deploy-2kcea0n6/ramdisk/ramdisk.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.201.1; our IP address is 192.168.201.14 Filename '11893471/tftp-deploy-2kcea0n6/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x2200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################## 980.5 KiB/s done Bytes transferred = 9311347 (8e1473 hex) U-Boot> setenv initrd_size ${filesize} setenv initrd_size ${filesize} U-Boot> tftp 0x00000100 11893471/tftp-deploy-2kcea0n6/dtb/bcm2836-rpi-2-b.dtb tftp 0x00000100 11893471/tftp-deploy-2kcea0n6/dtb/bcm2836-rpi-2-b.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.201.1; our IP address is 192.168.201.14 Filename '11893471/tftp-deploy-2kcea0n6/dtb/bcm2836-rpi-2-b.dtb'. Load address: 0x100 Loading: *# 825.2 KiB/s done Bytes transferred = 14374 (3826 hex) U-Boot> setenv bootargs 'console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' U-Boot> bootz 0x01000000 0x02200000 0x00000100 bootz 0x01000000 0x02200000 0x00000100 Kernel image @ 0x1000000 [ 0x000000 - 0x609c48 ] ## Loading init Ramdisk from Legacy Image at 02200000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 9311283 Bytes = 8.9 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 00000100 Booting using the fdt blob at 0x000100 reserving fdt memory region: addr=0 size=1000 Using Device Tree in place at 00000100, end 00006925 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.1.59-cip8 (KernelCI@build-j83109-arm-gcc-10-bcm2835-defconfig-qr9f4) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 Fri Oct 27 12:57:07 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 2 Model B [ 0.000000] earlycon: pl11 at MMIO 0x3f201000 (options '115200n8') [ 0.000000] printk: bootconsole [pl11] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Ignoring RAM at 0x30000000-0x3b000000 [ 0.000000] Consider using a HIGHMEM enabled kernel. [ 0.000000] Reserved memory: created CMA memory pool at 0x2c000000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm/kernel/devtree.c:130 arm_dt_init_cpu_maps+0xec/0x15c [ 0.000000] DT /cpu 2 nodes greater than max cores 1, capping them [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.1.59-cip8 #1 [ 0.000000] Hardware name: BCM2835 [ 0.000000] unwind_backtrace from show_stack+0x18/0x1c [ 0.000000] show_stack from dump_stack_lvl+0x24/0x2c [ 0.000000] dump_stack_lvl from __warn+0x88/0xec [ 0.000000] __warn from warn_slowpath_fmt+0x7c/0xb0 [ 0.000000] warn_slowpath_fmt from arm_dt_init_cpu_maps+0xec/0x15c [ 0.000000] arm_dt_init_cpu_maps from setup_arch+0x25c/0x618 [ 0.000000] setup_arch from start_kernel+0x5c/0x680 [ 0.000000] start_kernel from 0x0 [ 0.000000] ---[ end trace 0000000000000000 ]--- [ 0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 195072 [ 0.000000] Kernel command line: console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 689176K/786432K available (8192K kernel code, 1686K rwdata, 3516K rodata, 1024K init, 451K bss, 31720K reserved, 65536K cma-reserved) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 <6>[ 0.000000] ftrace: allocating 35512 entries in 105 pages <6>[ 0.000000] ftrace: allocated 105 pages with 4 groups <6>[ 0.000000] trace event string verifier disabled <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <3>[ 0.000000] [Firmware Bug]: Bootloader left irq enabled: bank 1 irq 9 <6>[ 0.000005] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns <6>[ 0.008812] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns <6>[ 0.018633] bcm2835: system timer (irq = 27) <6>[ 0.023675] arch_timer: cp15 timer(s) running at 19.20MHz (virt). <6>[ 0.030167] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns <6>[ 0.041441] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns <6>[ 0.049874] Switching to timer-based delay loop, resolution 52ns <6>[ 0.056692] Console: colour dummy device 80x30 <6>[ 0.061558] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) <6>[ 0.072401] CPU: Testing write buffer coherency: ok <6>[ 0.077700] pid_max: default: 32768 minimum: 301 <6>[ 0.083039] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.090783] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.101028] cblist_init_generic: Setting adjustable number of callback queues. <6>[ 0.108682] cblist_init_generic: Setting shift to 0 and lim to 1. <6>[ 0.115378] Setting up static identity map for 0x100000 - 0x100054 <6>[ 0.123713] devtmpfs: initialized <6>[ 0.133509] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 <6>[ 0.141900] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.152224] futex hash table entries: 256 (order: -1, 3072 bytes, linear) <6>[ 0.162895] pinctrl core: initialized pinctrl subsystem <6>[ 0.170774] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.178865] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.189475] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.189742] No ATAGs? <6>[ 0.198763] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. <6>[ 0.207195] hw-breakpoint: maximum watchpoint size is 8 bytes. <6>[ 0.213720] Serial: AMBA PL011 UART driver <6>[ 0.222086] platform 3f200000.gpio: Fixed dependency cycle(s) with /soc/gpio@7e200000/i2s_alt0 <6>[ 0.231188] platform 3f200000.gpio: Fixed dependency cycle(s) with /soc/gpio@7e200000/alt0 <6>[ 0.239892] platform 3f200000.gpio: Fixed dependency cycle(s) with /soc/gpio@7e200000/gpioout <6>[ 0.263356] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <5>[ 0.544161] SCSI subsystem initialized <6>[ 0.548600] usbcore: registered new interface driver usbfs <6>[ 0.554586] usbcore: registered new interface driver hub <6>[ 0.560325] usbcore: registered new device driver usb <4>[ 0.566008] usb_phy_generic phy: supply vcc not found, using dummy regulator <4>[ 0.573674] usb_phy_generic phy: dummy supplies not allowed for exclusive requests <6>[ 0.582052] mc: Linux media interface: v0.10 <6>[ 0.586758] videodev: Linux video capture interface: v2.00 <6>[ 0.592725] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.598055] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.607670] PTP clock support registered <6>[ 0.612179] Advanced Linux Sound Architecture Driver Initialized. <6>[ 0.619413] Bluetooth: Core ver 2.22 <6>[ 0.623390] NET: Registered PF_BLUETOOTH protocol family <6>[ 0.629094] Bluetooth: HCI device and connection manager initialized <6>[ 0.635859] Bluetooth: HCI socket layer initialized <6>[ 0.641114] Bluetooth: L2CAP socket layer initialized <6>[ 0.646549] Bluetooth: SCO socket layer initialized <6>[ 0.652620] clocksource: Switched to clocksource arch_sys_counter <6>[ 0.671361] NET: Registered PF_INET protocol family <6>[ 0.677194] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 0.687957] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.696903] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.705121] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 0.713384] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 0.721162] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 0.728158] UDP hash table entries: 512 (order: 1, 8192 bytes, linear) <6>[ 0.735139] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes, linear) <6>[ 0.742777] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 0.749511] RPC: Registered named UNIX socket transport module. <6>[ 0.755859] RPC: Registered udp transport module. <6>[ 0.760917] RPC: Registered tcp transport module. <6>[ 0.765986] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.775668] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available <6>[ 0.784589] Unpacking initramfs... <5>[ 0.805084] Initialise system trusted keyrings <6>[ 0.810348] workingset: timestamp_bits=30 max_order=18 bucket_order=0 <5>[ 1.163165] Key type asymmetric registered <5>[ 1.167673] Asymmetric key parser 'x509' registered <6>[ 1.183138] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) <6>[ 1.190984] io scheduler mq-deadline registered <6>[ 1.195923] io scheduler kyber registered <6>[ 1.224819] simple-framebuffer 3b006000.framebuffer: framebuffer at 0x3b006000, 0x85400 bytes <6>[ 1.233900] simple-framebuffer 3b006000.framebuffer: format=r5g6b5, mode=656x416x16, linelength=1312 <6>[ 1.266517] Console: switching to colour frame buffer device 82x26 <6>[ 1.283580] simple-framebuffer 3b006000.framebuffer: fb0: simplefb registered! <6>[ 1.313100] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled <6>[ 1.338792] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver <6>[ 1.363579] usbcore: registered new interface driver zd1211rw <6>[ 1.369823] usbcore: registered new interface driver lan78xx <6>[ 1.383425] usbcore: registered new interface driver asix <6>[ 1.389310] usbcore: registered new interface driver ax88179_178a <6>[ 1.413072] usbcore: registered new interface driver cdc_ether <6>[ 1.419419] usbcore: registered new interface driver smsc95xx <6>[ 1.444032] usbcore: registered new interface driver net1080 <6>[ 1.450193] usbcore: registered new interface driver cdc_subset <6>[ 1.463448] usbcore: registered new interface driver zaurus <6>[ 1.469576] usbcore: registered new interface driver cdc_ncm <6>[ 1.493118] usbcore: registered new interface driver r8153_ecm <6>[ 1.500154] usbcore: registered new interface driver usb-storage <6>[ 1.513113] i2c_dev: i2c /dev entries driver <4>[ 1.524735] i2c-bcm2835 3f805000.i2c: Could not read clock-frequency property <6>[ 1.544833] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer <6>[ 1.552056] sdhci: Secure Digital Host Controller Interface driver <6>[ 1.558673] sdhci: Copyright(c) Pierre Ossman <6>[ 1.583903] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 1.603819] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 1.610798] usbcore: registered new interface driver usbhid <6>[ 1.616804] usbhid: USB HID core driver <6>[ 1.633478] bcm2835-mbox 3f00b880.mailbox: mailbox enabled <6>[ 1.655285] NET: Registered PF_INET6 protocol family <6>[ 1.673465] Segment Routing with IPv6 <6>[ 1.677641] In-situ OAM (IOAM) with IPv6 <6>[ 1.682051] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 1.688444] sdhost-bcm2835 3f202000.mmc: loaded - DMA enabled (>1) <6>[ 1.704518] NET: Registered PF_PACKET protocol family <5>[ 1.710569] Loading compiled-in X.509 certificates <6>[ 1.779716] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 81, base_baud = 0) is a PL011 rev2 <6>[ 1.792356] printk: console [ttyAMA0] enabled <6>[ 1.792356] printk: console [ttyAMA0] enabled <6>[ 1.801736] printk: bootconsole [pl11] disabled <6>[ 1.801736] printk: bootconsole [pl11] disabled <6>[ 1.833498] raspberrypi-firmware soc:firmware: Attached to firmware from 2014-12-19T18:44:06 <4>[ 1.855555] ------------[ cut here ]------------ <4>[ 1.860474] WARNING: CPU: 0 PID: 13 at drivers/cpufreq/cpufreq-dt.c:79 dt_cpufreq_probe+0xb0/0x374 <4>[ 1.869785] Modules linked in: <4>[ 1.873127] CPU: 0 PID: 13 Comm: kworker/u2:1 Tainted: G W 6.1.59-cip8 #1 <4>[ 1.881559] Hardware name: BCM2835 <4>[ 1.885220] Workqueue: events_unbound deferred_probe_work_func <4>[ 1.891337] unwind_backtrace from show_stack+0x18/0x1c <4>[ 1.896841] show_stack from dump_stack_lvl+0x24/0x2c <4>[ 1.902171] dump_stack_lvl from __warn+0x88/0xec <4>[ 1.907156] __warn from warn_slowpath_fmt+0x7c/0xb0 <4>[ 1.912400] warn_slowpath_fmt from dt_cpufreq_probe+0xb0/0x374 <4>[ 1.918589] dt_cpufreq_probe from platform_probe+0x60/0xb0 <4>[ 1.924433] platform_probe from really_probe+0x1a4/0x3b0 <4>[ 1.930102] really_probe from __driver_probe_device+0x1a8/0x1d8 <4>[ 1.936375] __driver_probe_device from driver_probe_device+0x34/0xb4 <4>[ 1.943082] driver_probe_device from __device_attach_driver+0xbc/0x108 <4>[ 1.949963] __device_attach_driver from bus_for_each_drv+0xa4/0xb8 <4>[ 1.956496] bus_for_each_drv from __device_attach+0xe4/0x174 <4>[ 1.962507] __device_attach from bus_probe_device+0x30/0x88 <4>[ 1.968432] bus_probe_device from device_add+0x54c/0x6c4 <4>[ 1.974095] device_add from platform_device_add+0x1b0/0x1ec <4>[ 1.980022] platform_device_add from platform_device_register_full+0xe8/0x120 <4>[ 1.987515] platform_device_register_full from raspberrypi_cpufreq_probe+0xf8/0x180 <4>[ 1.995523] raspberrypi_cpufreq_probe from platform_probe+0x60/0xb0 <4>[ 2.002143] platform_probe from really_probe+0x1a4/0x3b0 <4>[ 2.007811] really_probe from __driver_probe_device+0x1a8/0x1d8 <4>[ 2.014085] __driver_probe_device from driver_probe_device+0x34/0xb4 <4>[ 2.020791] driver_probe_device from __device_attach_driver+0xbc/0x108 <4>[ 2.027671] __device_attach_driver from bus_for_each_drv+0xa4/0xb8 <4>[ 2.034203] bus_for_each_drv from __device_attach+0xe4/0x174 <4>[ 2.040214] __device_attach from bus_probe_device+0x30/0x88 <4>[ 2.046138] bus_probe_device from device_add+0x54c/0x6c4 <4>[ 2.051800] device_add from platform_device_add+0x1b0/0x1ec <4>[ 2.057727] platform_device_add from platform_device_register_full+0xe8/0x120 <4>[ 2.065220] platform_device_register_full from raspberrypi_clk_probe+0x15c/0x39c <4>[ 2.072982] raspberrypi_clk_probe from platform_probe+0x60/0xb0 <4>[ 2.079261] platform_probe from really_probe+0x1a4/0x3b0 <4>[ 2.084929] really_probe from __driver_probe_device+0x1a8/0x1d8 <4>[ 2.091202] __driver_probe_device from driver_probe_device+0x34/0xb4 <4>[ 2.097908] driver_probe_device from __device_attach_driver+0xbc/0x108 <4>[ 2.104789] __device_attach_driver from bus_for_each_drv+0xa4/0xb8 <4>[ 2.111321] bus_for_each_drv from __device_attach+0xe4/0x174 <4>[ 2.117332] __device_attach from bus_probe_device+0x30/0x88 <4>[ 2.123257] bus_probe_device from device_add+0x54c/0x6c4 <4>[ 2.128919] device_add from platform_device_add+0x1b0/0x1ec <4>[ 2.134845] platform_device_add from platform_device_register_full+0xe8/0x120 <4>[ 2.142339] platform_device_register_full from rpi_firmware_probe+0x190/0x1d4 <4>[ 2.149840] rpi_firmware_probe from platform_probe+0x60/0xb0 <4>[ 2.155859] platform_probe from really_probe+0x1a4/0x3b0 <4>[ 2.161527] really_probe from __driver_probe_device+0x1a8/0x1d8 <4>[ 2.167800] __driver_probe_device from driver_probe_device+0x34/0xb4 <4>[ 2.174507] driver_probe_device from __device_attach_driver+0xbc/0x108 <4>[ 2.181387] __device_attach_driver from bus_for_each_drv+0xa4/0xb8 <4>[ 2.187919] bus_for_each_drv from __device_attach+0xe4/0x174 <4>[ 2.193929] __device_attach from bus_probe_device+0x30/0x88 <4>[ 2.199854] bus_probe_device from deferred_probe_work_func+0xa4/0xc8 <4>[ 2.206559] deferred_probe_work_func from process_one_work+0x174/0x22c <4>[ 2.213442] process_one_work from worker_thread+0x238/0x2c4 <4>[ 2.219364] worker_thread from kthread+0xb4/0xc0 <4>[ 2.224341] kthread from ret_from_fork+0x14/0x28 <4>[ 2.229314] Exception stack(0xf0845fb0 to 0xf0845ff8) <4>[ 2.234623] 5fa0: 00000000 00000000 00000000 00000000 <4>[ 2.243052] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 <4>[ 2.251480] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 <4>[ 2.258406] ---[ end trace 0000000000000000 ]--- <4>[ 2.278924] mmc0: host does not support reading read-only switch, assuming write-enable <6>[ 2.295724] mmc0: new high speed SDHC card at address 0002 <6>[ 2.313726] mmcblk0: mmc0:0002 NCard 14.9 GiB <6>[ 2.325281] mmcblk0: p1 <6>[ 2.594466] Freeing initrd memory: 9096K <4>[ 2.601825] dwc2 3f980000.usb: supply vusb_d not found, using dummy regulator <4>[ 2.609603] dwc2 3f980000.usb: supply vusb_a not found, using dummy regulator <6>[ 2.668826] dwc2 3f980000.usb: DWC OTG Controller <6>[ 2.673871] dwc2 3f980000.usb: new USB bus registered, assigned bus number 1 <6>[ 2.681245] dwc2 3f980000.usb: irq 33, io mem 0x3f980000 <6>[ 2.688134] hub 1-0:1.0: USB hub found <6>[ 2.692200] hub 1-0:1.0: 1 port detected <4>[ 2.699310] OF: fdt: not creating '/sys/firmware/fdt': CRC check failed <6>[ 3.042638] usb 1-1: new high-speed USB device number 2 using dwc2 <6>[ 3.293678] hub 1-1:1.0: USB hub found <6>[ 3.297796] hub 1-1:1.0: 5 ports detected <6>[ 3.622640] usb 1-1.1: new high-speed USB device number 3 using dwc2 <6>[ 3.755924] smsc95xx v2.0.0 <6>[ 3.885586] SMSC LAN8700 usb-001:003:01: attached PHY driver (mii_bus:phy_addr=usb-001:003:01, irq=94) <6>[ 3.896695] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:d2:0e:1f <6>[ 4.002647] usb 1-1.3: new high-speed USB device number 4 using dwc2 <6>[ 4.138701] usb-storage 1-1.3:1.0: USB Mass Storage device detected <6>[ 4.146358] scsi host0: usb-storage 1-1.3:1.0 <6>[ 4.796901] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup <6>[ 4.807828] smsc95xx 1-1.1:1.0 eth0: Link is Down <5>[ 5.242279] scsi 0:0:0:0: Direct-Access Kingston DT 101 G2 PMAP PQ: 0 ANSI: 0 CCS <6>[ 5.424146] smsc95xx 1-1.1:1.0 eth0: Link is Up - 100Mbps/Full - flow control off <6>[ 5.431974] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 5.462654] Sending DHCP requests . <5>[ 5.622657] random: crng init done <5>[ 6.182854] sd 0:0:0:0: [sda] 7669824 512-byte logical blocks: (3.93 GB/3.66 GiB) <5>[ 6.191076] sd 0:0:0:0: [sda] Write Protect is off <4>[ 6.196574] sd 0:0:0:0: [sda] No Caching mode page found <4>[ 6.202168] sd 0:0:0:0: [sda] Assuming drive cache: write through <6>[ 6.242231] sda: sda1 sda2 <5>[ 6.246190] sd 0:0:0:0: [sda] Attached SCSI removable disk <4>[ 7.562648] ., OK <6>[ 7.604846] IP-Config: Got DHCP answer from 192.168.201.1, my address is 192.168.201.14 <6>[ 7.613153] IP-Config: Complete: <6>[ 7.616650] device=eth0, hwaddr=b8:27:eb:d2:0e:1f, ipaddr=192.168.201.14, mask=255.255.255.0, gw=192.168.201.1 <6>[ 7.627392] host=bcm2836-rpi-2-b-cbg-0, domain=lava-rack, nis-domain=(none) <6>[ 7.635078] bootserver=192.168.201.1, rootserver=192.168.201.1, rootpath= <6>[ 7.635091] nameserver0=192.168.201.1 <5>[ 7.647292] cfg80211: Loading compiled-in X.509 certificates for regulatory database <5>[ 7.678090] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' <4>[ 7.685401] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 <6>[ 7.694903] ALSA device list: <6>[ 7.698150] No soundcards found. <6>[ 7.702148] uart-pl011 3f201000.serial: no DMA platform data <6>[ 7.708178] cfg80211: failed to load regulatory.db <6>[ 7.719859] Freeing unused kernel image (initmem) memory: 1024K <6>[ 7.726473] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 7.959046] udevd[98]: starting version 3.2.9 <27>[ 7.978415] udevd[98]: specified user 'tss' unknown <27>[ 7.984048] udevd[98]: specified group 'tss' unknown <30>[ 7.995654] udevd[99]: starting eudev-3.2.9 <4>[ 8.388601] vchiq: module is from the staging directory, the quality is unknown, you have been warned. <3>[ 8.520083] bcm2835_vchiq 3f00b840.mailbox: failed to set channelbase <6>[ 8.526941] vchiq: could not initialize vchiq platform <6>[ 9.482726] bcm2835-rng 3f104000.rng: hwrng registered done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-11893471/environment . /lava-11893471/environment / # /lava-11893471/bin/lava-test-runner /lava-11893471/0 /lava-11893471/bin/lava-test-runner /lava-11893471/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-11893471/0/tests/0_dmesg + cat uuid + UUID=11893471_1.5.<8>[ 10.288254] 2.4.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 10.355210] <8>[ 10.415976] <8>[ 10.476916] + set +x <8>[ 10.487906] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-11893471/environment / # . /lava-11893471/environment/lava-11893471/bin/lava-test-runner /lava-11893471/1 / # /lava-11893471/bin/lava-test-runner /lava-11893471/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-11893471/1/tests/1_bootrr + cat uuid + UUID=11893471_1.5.<8>[ 11.019451] 2.4.5 + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-11893471/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto 3f902000.hdmi 3f806000.vec 3fc00000.v3d /lava-11893471/1/../bin/lava-test-case <8>[ 12.105034] /lava-11893471/1/../bin/lava-test-case <8>[ 12.162404] /lava-11893471/1/../bin/lava-test-case <8>[ 12.196675] + set +x <8>[ 12.222267] / #